You may also be interested in...

Full Text Preview

Download Manual

22

Driver and Passenger Safety

Main MenuTable of Contentsst 01/08/21 20:08:49 31S2A620_026

SelectingaChildSeat To provide proper protection, a child seat should meet three requirements:

1.

Thechildseatshouldmeetsafety The child seat should standards. meet Federal Motor Vehicle Safety Standard 213 (FMVSS 213) or Canadian Motor Vehicle Safety Standard 213 (CMVSS 213). Look for the manufacturer’s statement of compliance on the box and seat.

2.

Thechildseatshouldbeofthe propertypeandsizetofitthechild.

A child who can sit

SmallChildren: up without support should be restrained in a forward-facing child seat. See page for additional information on protecting small children.

26

Protecting Children

3.

Thechildseatshouldfitthe passenger’sseat.

Due to variations in the design of child seats, vehicle seats, and seat belts, all child seats will not fit all seating positions in all cars.

However, Honda is confident that one or more child seat models can fit and be properly installed in all recommended seating positions in your car.

Before purchasing a child seat, we recommend that parents test the child seat to make sure it fits properly in the passenger’s seat. If a previously purchased child seat does not fit, you will need to buy a different one that will fit.

CONTINUED

Driver and Passenger Safety

23

Main MenuTable of Contentsst 01/08/21 20:09:00 31S2A620_027

Protecting Children

PlacingaChildSeat This page briefly summarizes Honda’s recommendations on where to place a child seat in your car.

Airbags Pose Serious

Risks to Children

The passenger’s airbag inflates with enough force to kill or seriously injure an infant in a rear-facing child seat.

Passenger’sSeat Infants:

Never in the passenger’s

seat, due to the passenger’s airbag hazard.

Smallchildren:

Not recommended,

due to the passenger’s airbag hazard. If a small child must ride in this car, move the vehicle seat to the rear-most position and secure a front-facing child seat with the seat belt. (see page 27

).

This car is not equipped with a tether attachment point.

A small child in a forward-facing child seat is also at risk. If the vehicle seat is too far forward, or the child’s head is thrown forward during a collision, an inflating airbag can kill or seriously injure the child.

If a small child must ride in this car, follow the instructions provided in this section.

24

Driver and Passenger Safety

Main MenuTable of Contentsst 01/08/21 20:09:09 31S2A620_028

InstallingaChildSeat After selecting a proper child seat, there are three main steps in installing the seat:

1.

Securethechildseattothecar All child seats withaseatbelt. must be secured to the car with the lap part of a lap/shoulder belt. A child whose seat is not properly secured to the car can be endangered in a crash. See page 27 secure a forward-facing child seat in this car.

for instructions on how to

2.

After installing a child

Makesurethechildseatisfirmly secured. seat, push and pull the seat forward and from side to side to verify that it is secure.

To provide security during normal driving maneuvers as well as during a collision, we recommend that parents secure a child seat as firmly as possible.

However, a child seat does not need to be ‘‘rock solid.’’ It may be difficult to install a child seat so that it does not move at all. Some side-to-side or back-and-forth movement can be expected and should not reduce the child seat’s effectiveness.

Protecting Children

3.

Securethechildinthechildseat. Make sure the child is properly strapped in the child seat according to the child seat maker’s instructions. A child who is not properly secured in a child seat can be thrown out of the seat in a crash and be seriously injured.

StoringaChildSeat When you are not using a child seat, either remove it and store it in a safe place, or make sure it is properly secured. An unsecured child seat can be thrown around the car during a crash or sudden stop and injure someone.

Driver and Passenger Safety

25

Main MenuTable of Contentsst 01/08/21 20:09:20 31S2A620_029

Protecting Children

Protecting Small Children

The passenger’s airbag poses serious risks to small children. If the vehicle seat is too far forward, or the child’s head is thrown forward during a collision, or the child is unrestrained or improperly restrained, an inflating airbag can kill or seriously injure the child.

For these reasons, we recommend that you do not carry a small child as a passenger.

26

Driver and Passenger Safety

If you decide to carry a small child in this car, follow the instructions and guidelines below.

ChildSeatType A child who can sit up without support, and who fits within the child seat maker’s weight and height limits, should be restrained in a forward-facing, upright child seat.

Of the different seats available, we recommend those that have a five- point harness system as shown.

We also recommend that a small child stay in the child seat as long as possible, until the child reaches the weight or height limit for the seat.

Improperly placing a forward- facing child seat in the front seat can result in serious injury or death if the airbags inflate.

If you must place a forward- facing child seat in front, move the vehicle seat as far back as possible and properly restrain the child.

Main MenuTable of Contentsst 01/08/21 20:09:31 31S2A620_030

ChildSeatInstallation The passenger’s seat belt has a locking mechanism that must be activated to secure a child seat.

The following pages provide instructions and tips on how to secure a forward-facing child seat with this type of seat belt.

1.

Move the vehicle seat to the rear- most position. Moving the seat as far back as possible reduces the chance of a child being injured or killed if the passenger’s airbag inflates. (See page instructions on how to adjust the seat.)

for

67

Protecting Children

2.

With the child seat in position, route the belt through the child seat according to the seat maker’s instructions, then insert the latch plate into the buckle.

3.

4.

To activate the lockable retractor, slowly pull the shoulder part of the belt all the way out until it stops, then let the belt feed back into the retractor (you might hear a clicking noise as the belt retracts).

After the belt has retracted, tug on it. If the belt is locked, you will not be able to pull it out. If you can pull the belt out, it is not locked and you will need to repeat these steps. CONTINUED

Driver and Passenger Safety

27

Main MenuTable of Contentsst 01/08/21 20:09:39 31S2A620_031

Protecting Children

5.

After confirming that the belt is locked, grab the shoulder part of the belt near the buckle and pull up to remove any slack from the lap part of the belt. Remember, if the lap part of the belt is not tight, the child seat will not be secure. It may help to put weight on the child seat, or push on the back of the seat, while pulling up on the belt.

28

Driver and Passenger Safety

6.

Push and pull the child seat forward and from side to side to verify that it is secure enough to stay upright during normal driving maneuvers. If the child seat is not secure, unlatch the belt, allow it to retract fully, then repeat these steps.

To deactivate the locking mechanism in order to remove a child seat, unlatch the buckle, unroute the seat belt, and let the belt fully retract.

Main MenuTable of Contentsst 01/08/21 20:09:52 31S2A620_032

Protecting Larger Children The passenger’s airbag poses serious risks to children, including those who have outgrown child seats. If the vehicle seat is too far forward, or the child’s head is thrown forward during a collision, or the child is unrestrained or out of position, an inflating airbag can kill or seriously injure the child.

For these reasons, we recommend that you do not carry a child passenger.

With this in mind, following are some guidelines to help you decide when a given child may ride in your car.

TheChildShouldWearaSeatBelt When a child reaches the recommended weight or height limit for a forward-facing child seat, the child should wear a lap/shoulder belt.

If a child is too short for the shoulder part of the belt to properly fit, we recommend that the child use a booster seat until the child is tall enough to use the seat belt without a booster. The following pages give instructions on how to check proper seat belt fit, what kind of booster seat to use if one is needed, and important precautions for a child who must ride in this car.

Allowing a larger child to sit improperly in the front seat can result in injury or death if the airbags inflate.

If a larger child must sit in front, make sure the child moves the seat as far back as possible and wears the seat belt properly.

Protecting Children

CheckingSeatBeltFit

To determine if a lap/shoulder belt properly fits a child, have the child put on the seat belt. Follow the instructions on page how the belt fits.

. Then check

15

If the shoulder part of the belt rests over the child’s collarbone and against the center of the chest, as shown, the child is large enough to wear the seat belt.

CONTINUED

Driver and Passenger Safety

29

Main MenuTable of Contentsst 01/08/21 20:10:02 31S2A620_033

Protecting Children

However, if the belt touches or crosses the child’s neck, the child needs to use a booster seat.

Donotletachildwearaseatbelt This could result in acrosstheneck. serious neck injuries during a crash.

Donotletachildputtheshoulder partofaseatbeltbehindthebackor underthearm. very serious injuries during a crash. It also increases the chance that the child will slide under the belt in a crash and be injured.

This could cause

30

Driver and Passenger Safety

UsingaBoosterSeat

Donotputanyaccessoriesonaseat Devices intended to improve belt. occupant comfort or reposition the shoulder part of a seat belt, severely compromise the protective capability of the seat belt and increase the chance of serious injury in a crash.

Twochildrenshouldneverusethe If they do, they could sameseatbelt. be very seriously injured in a crash.

If a child needs a booster seat, we recommend choosing a style that allows the child to use the lap/ shoulder belt directly, without a shield, as shown.

Whichever style you select, follow the booster seat maker’s instructions.

Main MenuTable of Contentsst 01/08/21 20:10:11 31S2A620_034

Protecting Children

A child may continue using a booster seat until the tops of the ears are even with the top of the seat-back. A child of this height should be tall enough to use the lap/shoulder belt without a booster.

WhenCanaLargerChildRideinthis Car Children vary widely. And while age may be one indicator of when a child

Loading...
x