2012 Honda Civic Sedan Owners Manual

2 P. 249

If you want to perform complex maintenance tasks that require more skills and tools, you can purchase a subscription to the Service Express website at www.techinfo.honda.com.

2 Authorized Manuals P. 335

If you want to perform maintenance yourself, make sure that you have the necessary tools and skills first. After performing maintenance, update the records in the separate maintenance booklet.

2012 Civic SedanCIVIC 4D-31TR3600.book 241 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuBefore Performing MaintenanceuSafety When Performing Maintenance

Safety When Performing Maintenance Some of the most important safety precautions are given here. However, we cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task.

■ Maintenance Safety • To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames

away from the battery and all fuel related parts.

• To clean parts, use a commercially available degreaser or parts cleaner, not

gasoline.

• Wear eye protection and protective clothing when working with the battery or

compressed air.

• Engine exhaust contains carbon monoxide, which is poisonous and can kill you.

u Only operate the engine if there is sufficient ventilation.

■ Vehicle Safety • The vehicle must be in a stationary condition.

u Make sure your vehicle is parked on level ground, the parking brake is set, and

the engine is off.

• Be aware that hot parts can burn you.

u Make sure to let the engine and exhaust system cool thoroughly before

touching vehicle parts.

• Be aware that moving parts can injure you.

u Do not start the engine unless instructed, and keep your hands and limbs away

from moving parts.

1Safety When Performing Maintenance

3WARNING

Improperly maintaining this vehicle or failing to correct a problem before driving can cause a crash in which you can be seriously hurt or killed.

Always follow the inspection and maintenance recommendations according to the schedules in this owner's manual.

3WARNING

Failure to properly follow maintenance instructions and precautions can cause you to be seriously hurt or killed.

Always follow the procedures and precautions in this owner's manual.

QRG

TOC

Index

Home

241

2012 Civic SedanCIVIC 4D-31TR3600.book 242 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuBefore Performing MaintenanceuParts and Fluids Used in Maintenance Service

QRG

Parts and Fluids Used in Maintenance Service The use of Honda genuine parts and fluids is recommended when maintaining and servicing your vehicle. Honda genuine parts are manufactured according to the same high quality standards used in Honda vehicles.

TOC

Index

Home

242

2012 Civic SedanCIVIC 4D-31TR3600.book 243 ページ ２０１１年２月１４日　月曜日　午後２時５１分

Maintenance Minder™

If the engine oil life is less than 15%, you will see the Maintenance Minder messages appear on the information display * or the multi-information display * every time you turn the ignition switch to ON (w. The messages notify you when to change the engine oil, or when to bring your vehicle to a dealer for indicated maintenance services.

Models with information display To Use Maintenance MinderTM ■ Displaying the Engine Oil Life

1. Turn the ignition switch to ON (w.

2. Press the

(SEL/RESET) knob repeatedly

until the engine oil life appears on the information display.

The Maintenance Minder indicator ( ) stays on in the instrument panel after the engine oil life becomes 0%. Have the indicated maintenance done by a dealer immediately.

* Not available on all models

Continued

QRG

TOC

Index

Home

243

1Displaying the Engine Oil Life

Based on the engine operating conditions, the remaining engine oil life is calculated and displayed as a percentage.

Displayed Engine Oil

Calculated Engine Oil

Life (%)

100
90
80
70
60
50
40
30
20
15
10

Life (%) 100 to 91
90 to 81
80 to 71
70 to 61
60 to 51
50 to 41
40 to 31
30 to 21
20 to 16
15 to 11
10 to 6
5 to 1

2012 Civic SedanCIVIC 4D-31TR3600.book 244 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuMaintenance Minder™uTo Use Maintenance MinderTM

QRG

■ Maintenance Minder Messages on the Information Display To switch the display, press the

(SEL/RESET) knob.

Oil Life Display

Explanation

Information

Maintenance Minder Indicator

The engine oil life indicator starts to appear along with other due soon maintenance item codes when the remaining oil life becomes 15 percent.

The “SERVICE” message also starts to appear along with the engine oil life indicator and the maintenance item codes.

The remaining engine oil life has passed its service life, and a negative distance appears after driving over 10 miles (U.S. models) or 10 km (Canadian models). The negative distance on the display blinks.

The engine oil is approaching the end of its service life.

The engine oil has almost reached the end of its service life, and the maintenance items should be inspected and serviced as soon as possible.

The engine oil life has passed. The maintenance items must be inspected and serviced immediately.

Starts to come on when the remaining engine oil life becomes 15 percent. It goes off when the display is switched.

Stays on as a reminder even when the display is switched.

TOC

Index

Home

244

2012 Civic SedanCIVIC 4D-31TR3600.book 245 ページ ２０１１年２月１４日　月曜日　午後２時５１分

■ Maintenance Service Items

Maintenance Minder Indicator

Maintenance Minder Message

Main Item

Sub Items

uuMaintenance Minder™uTo Use Maintenance MinderTM

QRG

1Maintenance Service Items

• Independent of the Maintenance Minder

information, replace the brake fluid every 3 years.

• Inspect idle speed every 160,000 miles

(256,000 km).

• Adjust the valves during services A, B, 1, 2, or 3 if

they are noisy.

CODE

Maintenance Main Items

CODE

Maintenance Sub Items

● Replace engine oil*1
● Replace engine oil*1 and oil filter ● Inspect front and rear brakes/service as necessary ● Check parking brake adjustment ● Inspect tie rod ends, steering gearbox, and boots ● Inspect suspension components ● Inspect driveshaft boots ● Inspect brake hoses and lines (Including ABS/VSA) ● Inspect all fluid levels and condition of fluids ● Inspect exhaust system# ● Inspect fuel lines and connections#

● Rotate tires ● Replace air cleaner element*2
● Replace dust and pollen filter *,*3
● Inspect drive belt ● Replace transmission fluid ● Replace spark plugs ● Inspect valve clearance ● Replace engine coolant

*2: *3:

If you drive in dusty conditions, replace the air cleaner element every 15,000 miles (24,000 km). If you drive primarily in urban areas that have high concentrations of soot in the air from industry and from diesel-powered vehicles, replace the dust and pollen filter every 15,000 miles (24,000 km).

*1:

# :

If a message “SERVICE” does not appear more than 12 months after the display is reset, change the engine oil every year. See information on maintenance and emissions warranty.

* Not available on all models

Continued

TOC

Index

Home

245

2012 Civic SedanCIVIC 4D-31TR3600.book 246 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuMaintenance Minder™uTo Use Maintenance MinderTM

QRG

■ Resetting the Display Reset the engine oil life display if you have performed the maintenance service.

1. Turn the ignition switch to ON (w.

2. Display the engine oil life by repeatedly

pressing the

(SEL/RESET) knob.

3. Press and hold the

knob for ten seconds

or more. u The engine oil life indicator and the

maintenance item codes blink.

4. Press the

knob for five seconds or more.

u The displayed maintenance items

disappear, and the engine oil life display returns to 100%.

1Resetting the Display

NOTICE Failure to reset the engine oil life after a maintenance service results in the system showing incorrect maintenance intervals, which can lead to serious mechanical problems.

The dealer will reset the engine oil life display after completing the required maintenance service. If someone other than a dealer performs maintenance service, reset the engine oil life display yourself.

TOC

Index

Home

246

2012 Civic SedanCIVIC 4D-31TR3600.book 247 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuMaintenance Minder™uTo Use Maintenance MinderTM

QRG

Models with multi-information display To Use Maintenance MinderTM ■ Displaying the Engine Oil Life and Maintenance Items Maintenance items, which should be serviced at the same time that you replace the engine oil, appear on the multi-information display. You can view them on the Maintenance info screen at any time. 1. Turn the ignition switch to ON (w. 2. Press the MENU button to go to the Vehicle Menu screen. 3. Select Vehicle Information with the 4. Press the SOURCE button again to go to the Maintenance info screen. The

button, then press the SOURCE button.

engine oil life appears on the multi-information display.

Engine Oil Life

2345
50

Engine oil

Air filters

Main Item

Sub Item

Button

SOURCE Button MENU Button

SOURCE

MENU

Continued

1Displaying the Engine Oil Life and Maintenance Items

Based on the engine operating conditions, the remaining engine oil life is calculated and displayed as a percentage.

Displayed Engine Oil

Calculated Engine Oil

Life (%)

100
90
80
70
60
50
40
30
20
15
10

Life (%) 100 to 91
90 to 81
80 to 71
70 to 61
60 to 51
50 to 41
40 to 31
30 to 21
20 to 16
15 to 11
10 to 6
5 to 1

There is a list of maintenance main and sub items you can view on the multi-information display. 2 Maintenance Service Items P. 249

TOC

Index

Home

247

2012 Civic SedanCIVIC 4D-31TR3600.book 248 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuMaintenance Minder™uTo Use Maintenance MinderTM

QRG

■ Maintenance Minder Messages on the Multi-Information Display

Maintenance Message

Oil Life Display

Explanation

Information

SERVICE DUE SOON

15 %

2345

Engine oil

Air filters

SERVICE DUE NOW

5 %

2345
15

2345

2345

Engine oil

Air filters

SERVICE PAST DUE

Negative Distance

2345

-30
2345

The remaining engine oil life is 15 to 6 percent. Once you switch the display by pressing the (display/information) button, this message will go off.

The engine oil is approaching the end of its service life, and the maintenance items should be inspected and serviced soon.

The remaining engine oil life is 5 to 1 percent. Press the switch to another display.

button to

The engine oil has almost reached the end of its service life, and the maintenance items should be inspected and serviced as soon as possible.

The remaining engine oil life has passed its service life, and a negative distance appears after driving over 10 miles (U.S. models) or 10 km (Canadian models). Press the

button to switch to another display.

The engine oil life has passed. The maintenance items must be inspected and serviced immediately.

The system message indicator (

) comes on along with the Maintenance Minder message.

TOC

Index

Home

248

2012 Civic SedanCIVIC 4D-31TR3600.book 249 ページ ２０１１年２月１４日　月曜日　午後２時５１分

■ Maintenance Service Items

System Message Indicator

Maintenance Minder Message

2345

Main Item

Sub Items

uuMaintenance Minder™uTo Use Maintenance MinderTM

QRG

1Maintenance Service Items

• Independent of the Maintenance Minder

information, replace the brake fluid every 3 years.

• Inspect idle speed every 160,000 miles

(256,000 km).

• Adjust the valves during services A, B, 1, 2, or 3 if

they are noisy.

CODE

Maintenance Main Items

CODE

Maintenance Sub Items

● Replace engine oil*1
● Replace engine oil*1 and oil filter ● Inspect front and rear brakes/service as necessary ● Check parking brake adjustment ● Inspect tie rod ends, steering gearbox, and boots ● Inspect suspension components ● Inspect driveshaft boots ● Inspect brake hoses and lines (Including ABS/VSA) ● Inspect all fluid levels and condition of fluids ● Inspect exhaust system# ● Inspect fuel lines and connections#

● Rotate tires ● Replace air cleaner element*2
● Replace dust and pollen filter*3
● Inspect drive belt ● Replace transmission fluid ● Replace spark plugs ● Inspect valve clearance ● Replace engine coolant

*2: *3:

If you drive in dusty conditions, replace the air cleaner element every 15,000 miles (24,000 km). If you drive primarily in urban areas that have high concentrations of soot in the air from industry and from diesel-powered vehicles, replace the dust and pollen filter every 15,000 miles (24,000 km).

*1:

# :

If a message “SERVICE” does not appear more than 12 months after the display is reset, change the engine oil every year. See information on maintenance and emissions warranty.

Continued

TOC

Index

Home

249

2012 Civic SedanCIVIC 4D-31TR3600.book 250 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuMaintenance Minder™uTo Use Maintenance MinderTM

■ Resetting the Display Reset the engine oil life display if you have performed the maintenance service.

2345

Engine Oil Life

Engine oil

Air filters

Maintenance Item Codes

SOURCE

SOURCE Button

–

Button

1. Turn the ignition switch to ON (w. 2. Go to the Maintenance info screen.

2 Displaying the Engine Oil Life and Maintenance Items P. 247

QRG

TOC

3. Press the SOURCE button.

u The oil life reset mode is displayed on the multi-information display.

Index

4. Select Yes with the

–

button, then press the SOURCE button.

1Resetting the Display

NOTICE Failure to reset the engine oil life after a maintenance service results in the system showing incorrect maintenance intervals, which can lead to serious mechanical problems.

The dealer will reset the engine oil life display after completing the required maintenance service. If someone other than a dealer performs maintenance service, reset the engine oil life display yourself.

u The displayed maintenance items disappear, and the engine oil life display

returns to 100%.

u Any maintenance items that are necessary for your vehicle at the next

maintenance service will appear.

To cancel the oil life reset mode, select No, then press the SOURCE button.

Home

250

2012 Civic SedanCIVIC 4D-31TR3600.book 251 ページ ２０１１年２月１４日　月曜日　午後２時５１分

Maintenance Under the Hood

Maintenance Items Under the Hood 1.8 ℓ engine models

Engine Oil Dipstick (Orange Handle)

Engine Oil Fill Cap

Washer Fluid (Blue Cap)

Brake Fluid (Black Cap)

Manual transmission models Clutch Fluid (Light Gray Cap)

Automatic transmission models Automatic Transmission Fluid Dipstick (Yellow Loop)

Battery

Radiator Cap

Engine Coolant Reservoir

QRG

TOC

Index

Home

Continued

251

2012 Civic SedanCIVIC 4D-31TR3600.book 252 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuMaintenance Under the HooduMaintenance Items Under the Hood

QRG

2.4 ℓ engine models

Engine Oil Fill Cap

Engine Oil Dipstick (Orange Handle)

Washer Fluid (Blue Cap)

TOC

Index

Home

252

Brake Fluid (Black Cap)

Clutch Fluid (Light Gray Cap)

Battery

Radiator Cap

Engine Coolant Reservoir

2012 Civic SedanCIVIC 4D-31TR3600.book 253 ページ ２０１１年２月１４日　月曜日　午後２時５１分

Opening the Hood

Hood Release Handle

Pull

uuMaintenance Under the HooduOpening the Hood

QRG

1. Park the vehicle on a level surface, and set

1Opening the Hood

the parking brake.

2. Pull the hood release handle under the

lower left corner of the dashboard. u The hood will pop up slightly.

NOTICE Do not open the hood when the wiper arms are raised.

The hood will strike the wipers, and may damage either the hood or the wipers.

When closing the hood, check that the hood is securely latched.

3. Push up the hood latch lever in the center of the hood to release the lock mechanism, and open the hood.

If the hood latch lever moves stiffly, or if you can open the hood without lifting the lever, the latch mechanism should be cleaned and lubricated.

Lever

Support Rod Grip

Clamp

4. Remove the support rod from the clamp using the grip. Mount the support rod in the hood.

When closing, remove the support rod, and stow it in the clamp, then gently lower the hood. Remove your hand at a height of approximately 12 inches (30 cm) and let the hood close.

TOC

Index

Home

253

2012 Civic Sedan1Recommended Engine Oil

Engine Oil Additives Your vehicle does not require oil additives. In fact, they may adversely affect the engine performance and durability.

CIVIC 4D-31TR3600.book 254 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuMaintenance Under the HooduRecommended Engine Oil

QRG

Recommended Engine Oil

• Genuine Honda Motor Oil • Premium-grade 0W-20 detergent oil with an API Certification Seal on the

container.

Oil is a major contributor to your engine's performance and longevity. If you drive the vehicle with insufficient or deteriorated oil, the engine may fail or be damaged.

This seal indicates the oil is energy conserving and that it meets the American Petroleum Institute’s latest requirements.

Use a Genuine Honda Motor Oil or another commercial engine oil of suitable viscosity for the ambient temperature as shown.

Ambient Temperature

■ Synthetic oil You may also use synthetic motor oil if it is labeled with the API Certification Seal and is the specified viscosity grade.

TOC

Index

Home

254

2012 Civic SedanCIVIC 4D-31TR3600.book 255 ページ ２０１１年２月１４日　月曜日　午後２時５１分

Oil Check We recommend that you check the engine oil level every time you refuel. Park the vehicle on level ground. Wait approximately three minutes after turning the engine off before you check the oil. 1.8 ℓ engine models

1. Remove the dipstick (orange handle).

2. Wipe the dipstick with a clean cloth or

paper towel.

3. Insert the dipstick back all the way into its

hole.

2.4 ℓ engine models

uuMaintenance Under the HooduOil Check

QRG

1Oil Check

If the oil level is near or below the lower mark, slowly add oil being careful not to overfill.

TOC

Index

Home

255

Continued

2012 Civic SedanCIVIC 4D-31TR3600.book 256 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuMaintenance Under the HooduOil Check

QRG

1.8 ℓ engine models

4. Remove the dipstick again, and check the level. It should be between the upper and lower marks. Add oil if necessary.

Upper Mark Lower Mark

2.4 ℓ engine models

Upper Mark Lower Mark

TOC

Index

Home

256

2012 Civic SedanCIVIC 4D-31TR3600.book 257 ページ ２０１１年２月１４日　月曜日　午後２時５１分

Adding Engine Oil

1.8 ℓ engine models

Engine Oil Fill Cap

2.4 ℓ engine models

Engine Oil Fill Cap

uuMaintenance Under the HooduAdding Engine Oil

QRG

1. Unscrew and remove the engine oil fill cap.

1Adding Engine Oil

2. Add oil slowly.

3. Reinstall the engine oil fill cap, and tighten

it securely.

4. Wait for three minutes and recheck the

engine oil dipstick.

If any oil spills, wipe it up immediately. Spilled oil may damage the engine compartment components.

NOTICE Do not fill the engine oil above the upper mark. Overfilling the engine oil can result in leaks and engine damage.

TOC

Index

Home

257

2012 Civic Sedan1Changing the Engine Oil and Oil Filter

NOTICE You may damage the environment if you do not dispose of the oil in a suitable way. If you are changing the oil by yourself, appropriately dispose of the used oil. Put the oil in a sealed container and take it to a recycling center. Do not throw the oil away into a garbage can or onto the ground.

CIVIC 4D-31TR3600.book 258 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter

QRG

Changing the Engine Oil and Oil Filter You must change the engine oil and oil filter regularly in order to maintain the engine's lubrication. The engine may be damaged if they are not changed regularly.

Change the oil and filter in accordance with the maintenance message on the information display */multi-information display *. 1.8 ℓ engine models

1. Run the engine until it reaches normal

operating temperature, and then turn the engine off.

Bolt

Under Cover

2. Open the hood and remove the engine oil

fill cap.

1.8 ℓ engine models 3. Remove the bolts on the undercarriage

and remove the under cover.

TOC

Index

Home

258

* Not available on all models

2012 Civic SedanCIVIC 4D-31TR3600.book 259 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter

1.8 ℓ engine models

Drain Bolt

All models 4. Remove the drain bolt and washer from the bottom of the engine, and drain the oil into a suitable container.

2.4 ℓ engine models

Washer

Drain Bolt

Washer

Continued

QRG

TOC

Index

Home

259

2012 Civic SedanCIVIC 4D-31TR3600.book 260 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter

QRG

1.8 ℓ engine models

Oil Filter

2.4 ℓ engine models

1Changing the Engine Oil and Oil Filter

You will need a special wrench to replace the oil filter. You can buy this wrench from a dealer.

When installing the new oil filter, follow the instructions supplied with the oil filter.

Reinstall the engine oil fill cap. Start the engine. The low oil pressure indicator should go off within five seconds. If it does not, turn off the engine, and check your work.

5. Remove the oil filter and dispose of the

remaining oil.

6. Check that the filter gasket is not stuck to

the engine contact surface. u If it is stuck, you must detach it.

7. Wipe away dirt and dust adhering to the contact surface of the engine block, and install a new oil filter. u Apply a light coat of new engine oil to

the oil filter rubber seal.

8. Put a new washer on the drain bolt, then

reinstall the drain bolt. u Tightening torque: 1.8 ℓ engine models 29 lbf∙ft (39 N∙m, 4.0 kgf∙m) 2.4 ℓ engine models 30 lbf∙ft (40 N∙m, 4.0 kgf∙m)

TOC

Index

Home

260

Oil Filter

9. Pour the recommended engine oil into the engine. u Engine oil change capacity (including filter):

1.8 ℓ engine models 3.9 US qt (3.7 L) 2.4 ℓ engine models 4.4 US qt (4.2 L)

10.Reinstall the engine oil fill cap securely and

start the engine.

11.Run the engine for a few minutes, and

then check that there is no leak from the drain bolt or oil filter.

12.Stop the engine, wait for three minutes,

and then check the oil level on the dipstick. u If necessary, add more engine oil.

2012 Civic SedanCIVIC 4D-31TR3600.book 261 ページ ２０１１年２月１４日　月曜日　午後２時５１分

Engine Coolant

uuMaintenance Under the HooduEngine Coolant

QRG

Specified coolant: Honda Long Life Antifreeze/Coolant Type 2

1Engine Coolant

NOTICE 2.4 ℓ engine models You will need a more concentrated coolant if you are driving in extremely cold temperature below −31°F (−35°C). Consult your Honda dealer for details about a suitable coolant mixture.

All models If Honda antifreeze/coolant is not available, you may use another major brand non-silicate coolant as a temporary replacement. Check that it is a high quality coolant recommended for aluminum engines. Continued use of any non-Honda coolant can result in corrosion, causing the cooling system to malfunction or fail. Have the cooling system flushed and refilled with Honda antifreeze/coolant as soon as possible.

Do not add rust inhibitors or other additives to your vehicle's coolant system. They may not be compatible with the coolant or with the engine components.

This coolant is premixed with 50% antifreeze and 50% water. Do not add any straight antifreeze or water.

We recommend you check the engine coolant level every time you refuel. Check the reserve tank first. If it is completely empty, also check the coolant level in the radiator. Add the engine coolant accordingly.

■ Reserve Tank

MAX

1. Check the amount of coolant in the reserve

tank.

Reserve Tank

MIN

2. If the coolant level is below the MIN mark,

add the specified coolant until it reaches the MAX mark.

3. Inspect the cooling system for leaks.

Continued

TOC

Index

Home

261

2012 Civic SedanCIVIC 4D-31TR3600.book 262 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuMaintenance Under the HooduEngine Coolant

QRG

■ Radiator

1.8 ℓ engine models

Radiator Cap

2.4 ℓ engine models

1. Make sure the engine and radiator are

cool.

2. Turn the radiator cap counterclockwise and relieve any pressure in the coolant system. Do not push the cap down when turning.

3. Push down and turn the radiator cap

counterclockwise to remove it.

4. The coolant level should be up to the base

of the filler neck. Add coolant if it is low.

Radiator Cap

5. Put the radiator cap back on, and tighten it

fully.

6. Pour coolant into the reserve tank until it

reaches the MAX mark. Put the cap back on the reserve tank.

1Radiator

3WARNING

Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you.

Always let the engine and radiator cool down before removing the radiator cap.

NOTICE Pour the fluid slowly and carefully so you do not spill any. Clean up any spills immediately; they can damage components in the engine compartment.

TOC

Index

Home

262

2012 Civic SedanCIVIC 4D-31TR3600.book 263 ページ ２０１１年２月１４日　月曜日　午後２時５１分

Transmission Fluid ■ Automatic Transmission Fluid

Specified fluid: Honda ATF DW-1 (automatic transmission fluid)

Check the fluid level when the engine is at normal operating temperature.

HOT Range

Upper Mark Lower Mark

1. Park on level ground, and start the engine.

2. Wait until the radiator fan starts and then

turn off the engine. u Perform step 3 after waiting for about 60

seconds (less than 90 seconds).

3. Remove the dipstick (yellow loop) from the transmission and wipe it with a clean cloth.

4. Insert the dipstick all the way back into the

transmission securely, as shown in the image.

5. Remove the dipstick and check the fluid

level. u It should be between the upper and

lower marks in the HOT range.

6. If the level is below the lower mark, add

fluid into the dipstick hole to bring it to the level between the upper and lower marks, and have your vehicle checked by a dealer immediately.

Continued

uuMaintenance Under the HooduTransmission Fluid

QRG

1Automatic Transmission Fluid

NOTICE Do not mix Honda ATF DW-1 with other transmission fluids. Using a transmission fluid other than Honda ATF DW-1 may adversely affect the operation and durability of your vehicle's transmission, and damage the transmission. Any damage caused by using a transmission fluid that is not equivalent to Honda ATF DW-1 is not covered by Honda's new vehicle warranty.

NOTICE Pour the fluid slowly and carefully so you do not spill any. Clean up any spills immediately; they can damage components in the engine compartment.

TOC

Index

Home

263

2012 Civic SedanCIVIC 4D-31TR3600.book 264 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuMaintenance Under the HooduTransmission Fluid

QRG

■ Manual Transmission Fluid

Specified fluid: Honda Manual Transmission Fluid (MTF)

Check the fluid level when the engine is at normal operating temperature. 1.8 ℓ engine models

1. Park the vehicle on level ground.

1.8 ℓ engine models 2. Remove the bolts with a wrench, then

carefully remove the under cover.

1Manual Transmission Fluid

If Honda MTF is not available, you may use the API certificated SAE 0 W-20 or 5 W-20 viscosity motor oil as a temporary measure.

Replace with MTF as soon as possible. Motor oil does not contain the proper additives for the transmission and continued use can cause decreased shifting performance and lead to transmission damage.

3. Remove the holding clip and the bolt, then bend down the front edge of the left side under cover as shown in the image.

Bolt

Under Cover

1.8 ℓ engine models

Left Side Under Cover

Bolt

Clip

TOC

Index

Home

264

2012 Civic SedanCIVIC 4D-31TR3600.book 265 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuMaintenance Under the HooduTransmission Fluid

QRG

1.8 ℓ engine models

2.4 ℓ engine models

All models 4. Remove the transmission filler bolt and

washer. Carefully feel inside the bolt hole with your fingers. u Check if the fluid level is up to the edge

of the bolt hole.

5. If the fluid level is not up to the edge of the bolt hole, add Honda Manual Transmission Fluid (MTF) until it runs out of the hole.

6. Put a new washer on the filler bolt, then

reinstall the filler bolt. u Tightening torque:

33 lbf∙ft (44 N∙m, 4.5 kgf∙m)

1.8 ℓ engine models 7. Reinstall the left side under cover with the

holding clip and the bolt.

8. Reinstall the under cover with the bolts.

TOC

Index

Home

265

2012 Civic SedanCIVIC 4D-31TR3600.book 266 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuMaintenance Under the HooduBrake/Clutch Fluid

QRG

Brake/Clutch Fluid

Specified fluid: Honda Heavy Duty Brake Fluid DOT 3

1Brake/Clutch Fluid

Use the same fluid for both the brakes and clutch.

■ Checking the Brake Fluid

The fluid level should be between the MIN and MAX marks on the side of the reservoir.

MAX MIN

Brake Reservoir

■ Checking the Clutch Fluid

Clutch Reservoir

The fluid level should be between the MIN and MAX marks on the side of the reservoir.

MAX MIN

NOTICE Brake fluid marked DOT 5 is not compatible with your vehicle's braking system and can cause extensive damage.

If the specified brake fluid is not available, you should use only DOT 3 or DOT 4 fluid from a sealed container as a temporary replacement.

Using any non-Honda brake fluid can cause corrosion and decrease the longevity of the system. Have the brake system flushed and refilled with Honda Heavy Duty Brake Fluid DOT 3 as soon as possible.

If the brake fluid level is at or below the MIN mark, have a dealer inspect for leaks or worn brake pads as soon as possible.

1Checking the Clutch Fluid

If the clutch fluid level is at or below the MIN mark, have a dealer inspect for leaks or an excessively worn clutch plate as soon as possible.

TOC

Index

Home

266

2012 Civic SedanCIVIC 4D-31TR3600.book 267 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuMaintenance Under the HooduRefilling Window Washer Fluid

Refilling Window Washer Fluid Check the amount of window washer fluid using the washer fluid level gauge on the cap.

If the level is low, fill the washer reservoir.

1Refilling Window Washer Fluid

NOTICE Do not use engine antifreeze or a vinegar/water solution in the windshield washer reservoir. Antifreeze can damage your vehicle's paint. A vinegar/water solution can damage the windshield washer pump.

Level Gauge

QRG

TOC

Index

Home

267

2012 Civic SedanCIVIC 4D-31TR3600.book 268 ページ ２０１１年２月１４日　月曜日　午後２時５１分

QRG

Replacing Light Bulbs

Headlight Bulbs When replacing, use the following bulbs. High beam headlight: Low beam headlight:

60 W (HB3) 51 W (HB4)

■ High Beam Headlight

Coupler

Tab

Bulb

1. Remove the coupler.

u It can be removed by pushing the tab.

2. Rotate the old bulb to the left to remove.

3. Insert a new bulb into the headlight

assembly and turn it to the right.

4. Insert the coupler into the connector of the

bulb.

TOC

Index

Home

268

1Headlight Bulbs

NOTICE Halogen bulbs get very hot when lit.

Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.

The headlight aim is set by the factory, and does not need to be adjusted. However, if you regularly carry heavy items in the trunk or tow a trailer, have the aiming readjusted at a dealer or by a qualified technician.

The HB3 and HB4 types are halogen bulbs. When replacing a bulb, handle it by its base, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.

The exterior lights' inside lenses (headlights, brake lamps, etc.) may fog temporarily after a vehicle wash or while driving in the rain. This does not impact the exterior light function. However, if you see a large amount of water or ice accumulated inside the lenses, have your vehicle inspected by a dealer.

2012 Civic SedanCIVIC 4D-31TR3600.book 269 ページ ２０１１年２月１４日　月曜日　午後２時５１分

■ Low Beam Headlights

Clip (A)

Cover

Driver side 1.8 ℓ engine models 1. Remove the holding clips (A). Push up the tab, and remove the cover of the air intake duct and its upper part.

Tab

Air Intake Duct

uuReplacing Light BulbsuHeadlight Bulbs

QRG

1Low Beam Headlights

Holding clip (A-type) Pull the clip straight up to remove it.

2.4 ℓ engine models 1. Unlock the holding clips (B), then remove

the cover of the air intake duct.

Clip (B)

Keep the head of the clip raised when you insert it, push until it clicks.

Cover

Air Intake Duct

Fold in the upper part of the air intake duct to get enough working space.

Continued

TOC

Index

Home

269

2012 Civic SedanCIVIC 4D-31TR3600.book 270 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuReplacing Light BulbsuHeadlight Bulbs

Passenger side All models 2. Remove the holding clip (C) using a flat-tip screwdriver, then remove the upper part of the windshield washer reservoir.

1Low Beam Headlights

Holding clip (B-type) Press down the central pin until it clicks to unlock it.

Central pin

Push the central pin back to lock the clip. Then, insert the clip into the hole and press on the central pin until it is flat.

Push until the pin is flat.

QRG

Clip (C)

TOC

Index

Home

270

2012 Civic SedanCIVIC 4D-31TR3600.book 271 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuReplacing Light BulbsuHeadlight Bulbs

QRG

Bulb

Coupler

All models 3. Remove the coupler.

u It can be removed by pushing the tab.

4. Rotate the old bulb to the left to remove.

5. Insert a new bulb into the headlight

assembly and turn it to the right.

6. Insert the coupler into the connector of the

bulb.

Tab

1Low Beam Headlights

Holding clip (C-type) Insert a flat-tip screwdriver, lift and remove the central pin to remove the clip.

Central pin

Insert the clip with the central pin raised, and push until it is flat.

Push until the pin is flat.

TOC

Index

Home

271

2012 Civic Sedan1Fog Light Bulbs

NOTICE Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.

The fog lights are halogen bulbs.

When replacing a bulb, handle it by its plastic case, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.

CIVIC 4D-31TR3600.book 272 ページ ２０１１年２月１４日　月曜日　午後２時５１分

QRG

uuReplacing Light BulbsuFog Light Bulbs*

Fog Light Bulbs* When replacing, use the following bulbs. Fog Light: 55 W (H11)

Screw

1. Remove the screw using a Phillips-head

screwdriver and carefully pull the fog light assembly out of the bumper.

2. Remove the coupler.

Coupler

u It can be removed by pushing the tab.

3. Rotate the old bulb to the left to remove.

4. Insert a new bulb into the fog light

assembly and turn it to the right.

Bulb

5. Insert the coupler into the connector of the

Tab

bulb.

TOC

Index

Home

272

* Not available on all models

2012 Civic SedanCIVIC 4D-31TR3600.book 273 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuReplacing Light BulbsuFront Turn Signal/Parking/Side Marker Light Bulbs

Front Turn Signal/Parking/Side Marker Light Bulbs When replacing, use the following bulbs. Front Turn Signal/Parking/Side Marker Light: 28/8 W

Clip

1. Turn the steering wheel all the way to the opposite side from the light being replaced. Passenger side: Turn the steering wheel to the left. Driver side: Turn the steering wheel to the right.

2. Remove the holding clips, and pull the inner

fender back.

2 Low Beam Headlights P. 271

2.4 ℓ engine models 3. Detach the air intake duct tube and swing it

out of the inner fender.

Inner Fender

Air Intake Duct Tube

Continued

QRG

TOC

Index

Home

273

2012 Civic SedanCIVIC 4D-31TR3600.book 274 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuReplacing Light BulbsuFront Turn Signal/Parking/Side Marker Light Bulbs

All models 4. Turn the socket to the left and remove it,

then remove the old bulb.

5. Insert a new bulb.

Bulb

Socket

QRG

TOC

Index

Home

274

2012 Civic SedanCIVIC 4D-31TR3600.book 275 ページ ２０１１年２月１４日　月曜日　午後２時５１分

uuReplacing Light BulbsuBrake Light, Taillight, Back-Up Light, Rear Turn Signal Light and Rear Side Marker Light Bulbs

Brake Light, Taillight, Back-Up Light, Rear Turn Signal Light and Rear Side Marker Light Bulbs When replacing, use the following bulbs. Brake/Taillight: 21/5 W Back-Up Light: 21 W Rear Turn Signal Light: 21 W (Amber) Rear Side Marker Light: 3 CP

1. Remove the holding clips using a flat-tip

screwdriver, then pull the lining back.