2011 Honda Civic Sedan Owners Manual

connected, reconnect the device.

198

10/06/23 14:21:55 31SNA650_204

Radio Frequencies The radio can receive the complete AM and FM bands. Those bands cover these frequen- cies:

AM band: 530 to 1,710 kHz FM band: 87.7 to 107.9 MHz

Radio stations on the AM band are assigned frequencies at least 10 kHz apart (530, 540, 550). Stations on the FM band are assigned frequencies at least 0.2 MHz apart (87.9, 88.1, 88.3).

Stations must use these exact frequencies. It is fairly common for stations to round-off the frequency in their advertising, so your radio could display a frequency of 100.9 even though the announcer may identify the station as ‘‘FM101.’’

Radio Reception How well the radio receives stations is dependent on many factors, such as the distance from the station’s transmitter, nearby large objects, and atmospheric conditions.

A radio station’s signal gets weaker as you get farther away from its transmitter. If you are listening to an AM station, you will notice the sound volume becoming weaker, and the station drifting in and out. If you are listening to an FM station, you will see the stereo indicator flickering off and on as the signal weakens. Eventually, the stereo indicator will go off and the sound will fade completely as you get out of range of the station’s signal.

AM/FM Radio Reception

Driving very near the transmitter of a station that is broadcasting on a frequency close to the frequency of the station you are listening to can also affect your radio’s reception. You may temporarily hear both stations, or hear only the station you are close to.

199

10/06/23 14:22:02 31SNA650_205

AM/FM Radio Reception

Electrical interference from passing vehicles and stationary sources can cause temporary reception problems.

AsrequiredbytheFCC: Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.

Radio signals, especially on the FM band, are deflected by large objects such as buildings and hills. Your radio then receives both the direct signal from the station’s transmitter, and the deflected signal. This causes the sound to distort or flutter. This is a main cause of poor radio reception in city driving.

Radio reception can be affected by atmospheric conditions such as thunderstorms, high humidity, and even sunspots. You may be able to receive a distant radio station one day and not receive it the next day because of a change in conditions.

200

10/06/23 14:22:15 31SNA650_206

General Information

When using CD-R or CD-RW discs, use only high quality discs labeled for audio use.

When recording a CD-R or CD-RW, the recording must be closed for it to be used by the system.

Play only standard round discs. Odd-shaped discs may jam in the drive or cause other problems.

Handle your discs properly to prevent damage and skipping.

Do not use discs with adhesive labels. The label can curl up and cause the disc to jam in the unit.

Protecting Discs When a disc is not being played, store it in its case to protect it from dust and other contamination. To prevent warpage, keep discs out of direct sunlight and extreme heat.

To clean a disc, use a clean soft cloth. Wipe across the disc from the center to the outside edge.

A new disc may be rough on the inner and outer edges. The small plastic pieces causing this roughness can flake off and fall on the recording surface of the disc, causing skipping or other problems. Remove these pieces by rubbing the inner and outer edges with the side of a pencil or pen.

Never try to insert foreign objects in the disc player.

Protecting Your Discs

Handle a disc by its edges; never touch either surface. Do not place stabilizer rings or labels on the disc. These, along with contamination from finger prints, liquids, and felt- tip pens, can cause the disc to not play properly, or possibly jam in the drive.

201

10/06/23 14:22:28 31SNA650_207

Protecting Your Discs

Additional Information on Recommended Discs The disc player/changer has a sophisticated and delicate mechanism. If you insert a damaged disc as indicated below, it may become stuck inside and damage the audio unit.

Examples of these discs are shown to the right:

1.

Bubbled, wrinkled, labeled, and excessively thick discs

Bubbled/ Wrinkled

With Label/ Sticker

Using Printer Label Kit

Sealed

With Plastic Ring

2.

Damaged discs

3.

Poor quality discs

Chipped/ Cracked

Warped

Burrs

202

10/06/23 14:22:41 31SNA650_208

4.

Small, irregular shaped discs

5.

Discs with scratches, dirty discs

3-inch (8-cm) CD

Triangle Shape

Fingerprints, scratches, etc.

CD-R or CD-RW may not play due to the recording conditions.

Scratches and fingerprints on the discs may cause the sound to skip.

Can Shape

Arrow Shape

Protecting Your Discs

Recommended discs are printed with the following logo.

Audio unit may not play the following formats.

203

10/06/23 14:22:53 31SNA650_209

Remote Audio Controls

CH BUTTON

MODE BUTTON

VOL BUTTON

Ifequipped Three controls for the audio system are mounted in the steering wheel hub. These let you control basic functions without removing your hand from the wheel.

▲

) or down (

The VOL button adjusts the volume up ( ). Press the top or bottom of the button, hold it until the desired volume is reached, then release it.

▼

204

The MODE button changes the mode.

Onvehicleswithnavigationsystem Pressing the MODE button repeatedly cycles through all possible media sources whether they are present or not.

Onvehicleswithoutnavigationsystem Pressing the MODE button repeatedly cycles through all present, connected media sources. Media sources that are not present or connected will not appear when cycling with the MODE button.

＋

) of the button, the system

If you are listening to the radio, use the CH button to change stations. Each time you press and release the top ( goes to the next preset station on the band you are listening to. Press and release the bottom ( ) to go back to the previous station.

−

＋

To activate the seek function, press and hold the top ( ) or bottom ( − of the CH button until you hear a beep. The system searches up or down from the current frequency to find a station with a strong signal.

If you are playing a disc, the system skips to the beginning of the next track (file in MP3 or WMA format) each time you press the top ( ) of ＋ the CH button. Press the bottom ) to return to the beginning of the − current track or file. Press it twice to return to the previous track or file.

You will see the track/file number and the elapsed time. If the disc has text data or is compressed in MP3 or WMA, you can also see any other information (track title, file name, folder name, etc.).

10/06/23 14:23:01 31SNA650_210

＋

) of the CH button to

If you are playing a PC card, press the top ( advance to the next file. Press the bottom ( previous file.

) to go back to the

−

If you are playing a USB flash memory device or iPod with the USB adapter cable (if equipped), press and release the top ( ) of the CH button to skip forward to the beginning of the next file. Press the bottom ( ) to skip backward to the beginning of the current file. Press it twice to return to the previous file.

＋

−

In MP3 or WMA mode, you can use the seek function to select folders. Press and hold the top ( ) of the CH button until you hear a beep to skip forward to the first file of the next folder. Press the bottom ( ) to − skip backward to the previous folder.

＋

Remote Audio Controls, Auxiliary Input Jack

Auxiliary Input Jack Onmodelswithaudiosystem

When a compatible audio unit is connected to the jack, press the AUX button to select it.

The auxiliary input jack is underneath the accessory power socket on the front panel. The system will accept auxiliary input from standard audio accessories using a 1/8 inch (3.5 mm) stereo miniplug.

205

10/06/23 14:23:08 31SNA650_211

Radio Theft Protection

Onmodelswithaudiosystem Your vehicle’s audio system will disable itself if it is disconnected from electrical power for any reason. To make it work again, you must enter a specific 5 digit code using the preset buttons (icon on vehicle’s with navigation system). Because there are hundreds of number combinations possible from specific digits, making the system work without knowing the exact code is nearly impossible.

You should have received a card that lists your audio system’s code and serial numbers. It is best to store this card in a safe place at home. In addition, you should write the audio system’s serial number in this owner’s manual.

If you lose the card, you must obtain the code number from a dealer. To do this, you will need the system’s serial number.

206

If your vehicle’s battery is disconnected or goes dead, the audio system will disable itself. If this happens, you will see ‘‘ENTER CODE’’ in the frequency display the next time you turn on the system. Use the preset buttons (icons on vehicles with navigation system) to enter the code. The code is on the radio code card included in your owner’s manual kit. When it is entered correctly, the radio will start playing.

If you make a mistake entering the code, do not start over; complete the sequence, then enter the correct code. You have 10 tries to enter the correct code. If you are unsuccessful in 10 attempts, you must then leave the system on for 1 hour before trying again.

10/06/23 14:23:18 31SNA650_212

Onmodelswithoutnavigationsystem To set the time, press the CLOCK (AM/FM) button until the displayed time begins to blink, then release the button.

Change the hours by pressing the H (preset 1) button until the numbers advance to the desired time. Change the minutes by pressing the M (preset 2) button until the numbers advance to the desired time.

Press the CLOCK (AM/FM) button again to enter the set time.

You can quickly set the time to the nearest hour. If the displayed time is before the half hour, pressing the CLOCK (AM/FM) button until you hear a beep, then pressing the R (preset 3) button sets the clock back to the previous hour. If the displayed time is after the half hour, the clock sets forward to the beginning of the next hour.

Setting the Clock

CLOCK BUTTON

HOUR BUTTON

RESET BUTTON

U.S. Si model is shown.

MINUTE BUTTON

For example:

1:06 will reset to 1:00
1:52 will reset to 2:00

Onmodelswithnavigationsystem The navigation system receives signals from the global positioning system (GPS), and the displayed time is updated automatically by the GPS. Refer to the navigation system manual for how to adjust the time.

207

10/06/23 14:23:28 31SNA650_213

Security System

Ifequipped The security system helps to protect your vehicle and valuables from theft. The horn sounds and a combination of headlights (low beam), parking lights, side marker lights, and taillights flash if someone attempts to break into your vehicle or remove the radio. This alarm continues for 2
minutes, then it stops. To reset an activated system before the 2
minutes have elapsed, unlock the driver’s door with the key or the remote transmitter.

The security system automatically sets 15 seconds after you lock the doors, hood, and trunk. For the system to activate, you must lock the doors from the outside with the key, driver’s lock tab, door lock master switch, or remote transmitter. The security system indicator on the instrument panel starts blinking immediately to show you the system is setting itself.

208

Except Si

Si

SECURITY SYSTEM INDICATOR

Once the security system is set, opening any door (without using the key or the remote transmitter), the hood, or the trunk will cause the alarm to activate. It will also activate if the audio unit is removed from the dashboard or the wiring is cut.

With the system set, you can still open the trunk with the master key or the remote transmitter without triggering the alarm. The alarm will sound if the trunk lock is forced, or the trunk is opened with the trunk release handle.

The security system will not set if the hood, trunk, or any door is not fully closed. If the system will not set, check the door and trunk open indicators on the instrument panel (see page ) to see if the doors and trunk are fully closed. Since it is not part of the monitor display, manually check the hood.

61

To see if the system is set

NOTE: after you exit the vehicle, press the LOCK button on the remote transmitter within 5 seconds. If the system is set, the horn will beep once. Do not attempt to alter this system or add other devices to it.

10/06/23 14:23:40 31SNA650_214

Ifequipped Cruise control allows you to maintain a set speed above 25 mph (40 km/h) without keeping your foot on the accelerator pedal. It should be used for cruising on straight, open highways. It is not recommended for city driving, winding roads, slippery roads, heavy rain, or bad weather.

Improper use of the cruise control can lead to a crash.

Use the cruise control only when traveling on open highways in good weather.

Using the Cruise Control

CRUISE BUTTON

RES/ACCEL BUTTON

CANCEL BUTTON

SET/DECEL BUTTON

1.

Push the CRUISE button on the steering wheel. The CRUISE MAIN indicator on the instrument panel comes on.

2.

Accelerate to the desired cruising speed above 25 mph (40 km/h).

Cruise Control

3.

Press and release the SET/ DECEL button on the steering wheel. The CRUISE CONTROL indicator on the instrument panel comes on to show the system is now activated.

Cruise control may not hold the set speed when you are going up and down hills. If your speed increases going down a hill, use the brakes to slow down. This will cancel cruise control. To resume the set speed, press the RES/ACCEL button. The indicator on the instrument panel will come back on.

209

10/06/23 14:23:52 31SNA650_215

Cruise Control

Changing the Set Speed You can increase the set cruising speed in any of these ways:

Press and hold the RES/ACCEL button. When you reach the desired cruising speed, release the button.

To increase the speed in very small amounts, tap the RES/ ACCEL button. Each time you do this, your vehicle will speed up about 1 mph (1.6 km/h).

Push on the accelerator pedal until you reach the desired cruising speed, then press the SET/ DECEL button.

210

You can decrease the set cruising speed in any of these ways:

If you need to decrease your NOTE: speed quickly, use the brakes as you normally would.

Even with the cruise control turned on, you can still use the accelerator pedal to speed up for passing. After completing the pass, take your foot off the accelerator pedal. The vehicle will return to the set cruising speed.

Press and hold the SET/DECEL button. Release the button when you reach the desired speed.

Resting your foot on the brake or clutch pedal causes the cruise control to cancel.

To slow down in very small amounts, tap the SET/DECEL button. Each time you do this, your vehicle will slow down about 1 mph (1.6 km/h).

Tap the brake or clutch pedal lightly with your foot. The CRUISE CONTROL indicator on the instrument panel goes out. When the vehicle slows to the desired speed, press the SET/ DECEL button.

10/06/23 14:24:01 31SNA650_216

Canceling Cruise Control

CRUISE BUTTON

CANCEL BUTTON

You can cancel cruise control in any of these ways:

Tap the brake or clutch pedal.

Push the CANCEL button on the steering wheel.

Push the CRUISE button on the steering wheel.

Resuming the Set Speed When you push the CANCEL button, or tap the brake or clutch pedal, the system will remember the previously set cruising speed. To return to that speed, accelerate to above 25 mph (40 km/h), and then press and release the RES/ACCEL button. The CRUISE CONTROL indicator comes on. The vehicle will accelerate to the same cruising speed as before.

Pressing the CRUISE button turns the system off and erases the previous cruising speed.

Cruise Control

211

10/06/23 14:24:14 31SNA650_217

Bluetooth HandsFreeLink

HandsFreeLink (HFL)

Onmodelswithnavigationsystem Bluetooth allows you to place and receive phone calls using voice commands, without handling your cell phone.

To use HFL, you need a Bluetooth- compatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities:

Using HFL HFLButtons

HFL TALK BUTTON

NAVI VOICE CONTROL BUTTONS

In the U.S., visit com

or call (888) 528-7876.

handsfreelink.honda.

In Canada, visit or call (888) 528-7876.

www.handsfreelink.ca,

212

HFL BACK BUTTON

HFL Talk button release to give a command or answer a call.

Press and

−

−

HFL Back button release to end a call, go back to the previous command, or cancel the command.

Press and

VoiceControlTips

MICROPHONE

Air or wind noise from the dashboard and side vents and all windows may interfere with the microphone. Adjust or close them as necessary.

10/06/23 14:24:24 31SNA650_218

Press and release the HFL Talk button each time you want to make a command. After the beep, speak in a clear, natural tone.

Try to reduce all background noise. If the microphone picks up voices other than yours, commands may be misinterpreted.

Many commands can be spoken together. For example, you can say ‘‘Call 123-456- ’’ or ‘‘Dial Peter.’’

＃＃＃＃

When HFL is in use, navigation voice commands cannot be recognized.

To change the volume level of HFL, use the audio system volume knob or the steering wheel volume controls.

Bluetooth HandsFreeLink

HelpFeatures

To hear general HFL information, including help on pairing a phone or setting up the system, say ‘‘Tutorial.’’

For help at any time, including a list of available commands, say ‘‘Hands free help.’’

CONTINUED

213

10/06/23 14:24:34 31SNA650_219

Bluetooth HandsFreeLink

Information Display

BLUETOOTH INDICATOR

A notification that there is an incoming call, or HFL is in use, will appear on the navigation screen when the audio system is on.

HFL MESSAGE

On the map screen, you will see a ‘‘HFL’’ message on the screen.

However, when the current street is shown, and AUDIO INFO icon is visible, ‘‘HFL’’ will not appear when there is an incoming call.

’’ indicator will be displayed on

‘‘ the audio display when a phone is linked.

214

10/06/23 14:24:44 31SNA650_220

Bluetooth HandsFreeLink

How to Use HFL

The ignition switch must be in the ACCESSORY (I) or ON (II) position.

‘‘Pair’’

‘‘Edit’’

Pair a phone to the system

(See page 218)

Edit the name of a paired phone

(See page 219)

‘‘Phone Setup’’

‘‘Delete’’

Delete a paired phone from the system

(See page 219)

Press HFL Talk button

‘‘List’’

‘‘Status’’

‘‘Next Phone’’

Hear a list of all phones paired to the system Hear which paired phone is currently linked to the system (See page 220) Search for another previously paired phone to link to

(See page 219)

(See page 220)

‘‘Set Pairing Code’’

Set the pairing code to a ‘‘Fixed’’ or ‘‘Random’’ number (See page 220)

‘‘Call’’ or ‘‘Dial’’

‘‘123-456-

＃＃＃＃

’’

Enter desired phone number (See page 221)

‘‘Jim Smith’’

Once a phonebook entry is stored, you can say a name here. (See page 221)

Press and release the HFL Talk button each time you give a command.

CONTINUED 215

10/06/23 14:24:49 31SNA650_221

Bluetooth HandsFreeLink

‘‘Redial’’

‘‘Transfer’’

‘‘Mute’’

‘‘Send’’

Redial the last number called (See page 222)

Transfer a call from HFL to your phone, or from your phone to HFL (See page 224)

Mute your voice to the person at the other end of the call (See page 225)

Send numbers or names during a call (See page 225)

Press HFL Talk button

‘‘Store’’

‘‘Edit’’

Store a phonebook entry (See page 226)

Edit the number of an existing phonebook entry (See page 226)

‘‘Phonebook’’

‘‘Delete’’

Delete a phonebook entry (See page 227)

‘‘Receive Contact’’

‘‘List’’

If your phone supports this function, use this to transfer contacts from your phone to HFL (See page 227)

Hear a list of all stored phonebook entries (See page 227)

Press and release the HFL Talk button each time you give a command.

216

10/06/23 14:24:57 31SNA650_222

Bluetooth HandsFreeLink

‘‘System Set up’’

Press HFL Talk button

‘‘Security’’

Apply a security passcode to the system that must be input at each key cycle to access the system (See page 232)

‘‘Change Passcode’’

Change your security passcode (See page 233)

‘‘Call Notification’’

‘‘Auto Transfer’’

Set how you would like to be notified of an incoming call (See page 233)

Set calls to automatically transfer from your phone to HFL when you enter the vehicle

(See page 233)

‘‘Clear’’

Clear the system of all paired phones, phonebook entries and security passcode (See page 234)

‘‘Change Language’’

Change language from English to French (See page 234) ＊

‘‘Tutorial’’

Hear a tutorial for general rules on using the system (See page 213)

‘‘Hands Free Help’’

Hear a list of available commands and additional information describing each command (See page 213)

Press and release the HFL Talk button each time you give a command. : Canadian models

＊

CONTINUED 217

10/06/23 14:25:09 31SNA650_223

Bluetooth HandsFreeLink

To use HFL, you need to pair your Bluetooth-compatible cell phone to the system.

Phone Setup This command group is available for paired cell phones.

Phonepairingtips

You cannot pair your phone while the vehicle is moving.

Your phone must be in discovery or search mode to pair. Refer to your phone’s manual.

Up to six phones can be paired.

Your phone’s battery may drain faster when it is paired to HFL.

If after three minutes your phone is not ready to pair or a phone is not found, the system will time out and return to idle.

218

Topairacellphone: 1.

Press and release the HFL Talk button. If you are pairing a phone for the first time, HFL will give you information about the pairing process. If it is not the first phone you are pairing, say ‘‘ setup Pair

Phone .’’

’’ and say ‘‘

2.

Follow the HFL prompts and put your phone in discovery or search mode. HFL will give you a 4-digit pairing code and begin searching for your phone.

3.

When your phone finds a Bluetooth device, select HFL from the options and enter the 4-digit code from the previous step.

4.

Follow the HFL prompts and name the newly paired phone.

10/06/23 14:25:24 31SNA650_224

Torenameapairedphone: Press and release the HFL Talk button before a command.

Todeleteapairedphone: Press and release the HFL Talk button before a command.

1.

Say ‘‘

Phone setup

.’’

2.

Say ‘‘

Edit

’’ after the prompts.

3.

If there is more than one phone paired to the system, HFL will ask you which phone’s name you want to change. Follow the HFL prompts and rename the phone.

1.

2.

3.

Say ‘‘

Phone setup

.’’

Say ‘‘

Delete

’’ after the prompts.

HFL will ask you which phone you want to delete. Follow the HFL prompts to continue with the deletion.

Bluetooth HandsFreeLink

Tohearthenamesofallpaired phones: Press and release the HFL Talk button before a command.

1.

Say ‘‘

Phone setup

.’’

2.

Say ‘‘

List

’’ after the prompts.

3.

HFL will read out all the paired phone’s names.

CONTINUED

219

10/06/23 14:25:41 31SNA650_225

Bluetooth HandsFreeLink

Tohearwhichpairedphoneis currentlylinked: Press and release the HFL Talk button before a command.

Tochangefromthecurrentlylinked phonetoanotherpairedphone: Press and release the HFL Talk button before a command.

1.

Say ‘‘

Phone setup

.’’

1.

Say ‘‘

Phone setup

.’’

2.

3.

Say ‘‘

Status

’’ after the prompts.

HFL will tell you which phone is linked to the system.

2.

3.

4.

Next phone

’’ after the

Say ‘‘ prompts.

HFL disconnects the linked phone and searches for another paired phone.

Once another phone is found, it is linked to the system. HFL will inform you which phone is now linked.

If no other phones are found or paired, HFL will inform you that the original phone is linked again.

220

Tochangethepairingcodesetting: Press and release the HFL Talk button before a command.

1.

Say ‘‘

Phone setup

.’’

2.

3.

Set pairing code

’’ after the

Say ‘‘ prompts.

If you want HFL to create a random code each time you pair a phone, say ‘‘ .’’ If you want to choose your own 4-digit code to be used each time, say ‘‘ and follow the HFL prompts.

Random

Fixed ’’

10/06/23 14:25:55 31SNA650_226

Making a Call You can make calls using a name in the HFL phonebook or any phone number. You can also redial the last number called.

Bluetooth is the wireless technology that links your phone to HFL. HFL uses a Class 2 Bluetooth, which means the maximum range between your phone and vehicle is 30 feet (10
meters).

During a call, HFL allows you to talk up to 30 minutes after you remove the key from the ignition switch. However, this may weaken the vehicle’s battery.

Bluetooth HandsFreeLink

Tomakeacallusinganameinthe HFLphonebook: Press and release the HFL Talk button before a command.

Tomakeacallusingaphone number: Press and release the HFL Talk button before a command.

1.

Say ‘‘

Call

’’ or ‘‘

Dial

.’’

2.

3.

Follow the HFL prompts and say the name stored in the HFL phonebook that you want to call.

Follow the HFL prompts to confirm the name and make the call.

1.

Say ‘‘

Call

’’ or ‘‘

Dial

.’’

2.

Follow the HFL prompts and say the phone number you want to dial.

3.

Follow the HFL prompts to confirm the number and say Call ‘‘

’’ or ‘‘

Dial

.’’

Once connected, you will hear the person you called through the audio speakers.

CONTINUED

221

10/06/23 14:26:05 31SNA650_227

Bluetooth HandsFreeLink

Toredialthelastnumbercalledby HFL: Press and release the HFL Talk button and say ‘‘

Redial

.’’

Tomakeacallfromanimported phonebook:

1.

Press the INFO button, then select Cellular Phonebook ‘‘

.’’

3.

Select a phonebook you want to choose a phone number from.

Select ‘‘ Phonebook

.’’

Search Imported

If the phonebook you select is PIN- protected, you will need to enter the PIN to access it. See page more information.

230

for

2.

222

10/06/23 14:26:15 31SNA650_228

Bluetooth HandsFreeLink

List ICON

To search for a specific name in the phonebook, enter the keyword for either the first or last name.

4.

Select the name. All the phone numbers stored for that name will be listed.

To display all names in the List phonebook, select the ‘‘

’’ option.

5.

Select the desired number to call from the list.

Store in

Selecting ‘‘ HandsFreeLink number will be stored in HFL, so that you can call it using HFL’s name tag by voice.

,’’ the phone

223

Transferring a Call You can transfer a call from HFL to your phone, or from your phone to HFL.

Press and release the HFL Talk button and say ‘‘

Transfer

.’’

10/06/23 14:26:23 31SNA650_229

Bluetooth HandsFreeLink

Receiving a Call When you receive a call, an incoming call notification (if activated) will play and interrupt the audio system if it is on.

CallWaiting If your phone has Call Waiting, press and release the HFL Talk button to put the original call on hold and answer the incoming call.

Press the HFL Talk button to answer the call, or the HFL Back button to hang up.

To return to the original call, press the HFL Talk button again. If you don’t want to answer the incoming call, disregard it and continue with your original call. If you want to hang up the original call and answer the new call, press the HFL Back button.

224

10/06/23 14:26:35 31SNA650_230

Muting a Call You can mute your voice to the person you are talking to during a call.

To mute your voice during a call, press and release the HFL Talk button and say ‘‘

Mute

.’’

To unmute your voice, press and release the HFL Talk button and say Mute ‘‘

’’ again.

Bluetooth HandsFreeLink

Phonebook You can store up to 50 names with their associated numbers in HFL. The numbers you store can be not only phone numbers but other types, such as account numbers or passwords, which can be sent during a menu-driven call.

Send Numbers or Names During a Call HFL allows you to send numbers or names during a call. This is useful when you call a menu-driven phone system.

Tosendanameornumberduringa call: Press and release the HFL Talk button before a command.

1.

Say ‘‘

Send

.’’

2.

Follow the HFL prompts and say the name or number you want to send.

3.

Follow the HFL prompts to send the tones and continue the call.

To send a pound (

NOTE: ‘‘pound.’’ To send a star (*), say ‘‘star.’’

), say

＃

CONTINUED

225

10/06/23 14:26:52 31SNA650_231

Bluetooth HandsFreeLink

Tostoreaphonebookentry: Press and release the HFL Talk button before a command.

NOTE:

Avoid using duplicate name entries.

Toeditthenumberstoredinaname: Press and release the HFL Talk button before a command.

Avoid using ‘‘home’’ as a name entry.

It is easier for HFL to recognize a multisyllabic or longer name. For example, use ‘‘Peter’’ instead of ‘‘Pete,’’ or ‘‘John Smith’’ instead of ‘‘John.’’

1.

Say ‘‘

Phonebook

.’’

2.

Say ‘‘

Edit

’’ after the prompts.

3.

Follow the HFL prompts and say the name entry you want to edit.

4.

When asked, say the new number for that name.

5.

Follow the HFL prompts to complete the edit.

1.

Say ‘‘

Phonebook

.’’

2.

3.

Say ‘‘

Store

’’ after the prompts.

Say a name you want to list as your phonebook entry.

4.

Say the number you want to store for the name entry.

5.

Follow the HFL prompts and say Enter ‘‘

’’ to store the entry.

226

10/06/23 14:27:08 31SNA650_232

Todeleteaname: Press and release the HFL Talk button before a command.

Tolistallnamesinthephonebook: Press and release the HFL Talk button before a command.

1.

Say ‘‘

Phonebook

.’’

1.

Say ‘‘

Phonebook

.’’

2.

3.

Say ‘‘

Delete

’’ after the prompts.

Say the name you want to delete and follow the HFL prompts to complete the deletion.

2.

Say ‘‘

List

’’ after the prompts.

3.

HFL begins reading the names in the order they were stored.

4.

If you hear a name you want to call, immediately press the HFL Talk button and say ‘‘

Call

.’’

Bluetooth HandsFreeLink

Tostoreaspecificphonenumber fromyourcellphonedirectlytothe HFLphonebook(availableonsome phones): Press and release the HFL Talk button before a command.

1.

Say ‘‘

Phonebook

.’’

2.

3.

4.

Receive contact

Say ‘‘ prompts.

’’ after the

Follow the HFL prompts, select a number from your cell phone, and send it to HFL.

Follow the HFL prompts and name the number, or say Discard ‘‘ you want to store.

’’ if it is not the number

5.

Follow the HFL prompts if you want to store another number.

227

10/06/23 14:27:21 31SNA650_233

Bluetooth HandsFreeLink

Cellular Phonebook (availableonsomephones) Cellular Phonebook If you select from the Information screen menu, you will see four HFL options.

For a list of cell phones that are compatible with this feature:

ImportCellularPhonebook: The entire phonebook data of the cell phone that is linked to HFL can be imported to the navigation system.

SearchImportedPhonebook: Once a phonebook has been imported, you can search the phone numbers by the person’s name.

IMPORTED PHONEBOOK

PIN ICON

In the U.S., visit com

or call (888) 528-7876.

handsfreelink.honda.

In Canada, visit or call (888) 528-7876.

www.handsfreelink.ca,

IMPORTED DATE

Import Cellular

Select ‘‘ Phonebook ,’’ and HFL will begin importing the phonebook. Select OK ‘‘

’’ after the import is completed.

228

Search Imported

Select ‘‘ Phonebook phonebooks will be displayed.

,’’ and a list of imported

Select a phonebook from the list.

10/06/23 14:27:37 31SNA650_234

If the phonebook is PIN-protected, you will need to enter the 4-digit PIN.

List ICON

To search for a specific name in the phonebook, enter the keyword for either the first or last name.

To display all names in the List phonebook, select the ‘‘

’’ option.

Bluetooth HandsFreeLink

Select a person from the list. Up to three category icons are displayed in the left side of the list:

Fax

Car

Voice

Other

Preference

Home

Mobile

Work

Pager

These indicate how many numbers are stored for the name. If a name has more than three category icons, ‘‘…’’ is displayed.

Select the person’s number you want to call, and press the HFL Talk button.

CONTINUED

229

10/06/23 14:27:49 31SNA650_235

Bluetooth HandsFreeLink

DeleteImportedPhonebook: You can delete any imported phonebook.

After making a selection, the following screen will appear.

PIN Number You can add, change, or remove a PIN number from any phonebook.

Delete Imported

Select ‘‘ Phonebook phonebooks will be displayed.

,’’ and a list of imported

Select a phonebook you want to delete. If the phonebook is PIN- protected, you will need to enter the 4-digit PIN number.

230

Yes Select ‘‘ the deletion.

,’’ then ‘‘

OK

’’ to complete

ToaddaPIN: If you have selected a phonebook without a PIN, you will see the above display.

Enter the new 4-digit PIN. You will have to re-enter the PIN for confirmation.

10/06/23 14:27:58 31SNA650_236

TochangethePINtoanewnumber:

Select the phonebook you want. The display will change as shown above.

The display will change as shown above.

Enter the current PIN for this phonebook.

Enter the new 4-digit PIN number. You will be asked to re-enter the PIN for verification.

Bluetooth HandsFreeLink

PIN number

ToremoveaPIN: Select ‘‘ Do not use PIN ‘‘ the current PIN.

,’’ then select ’’ after you enter

231

Once a passcode is set, you NOTE: will need to enter it to use HFL each time you start the vehicle. If you forget the code, your dealer will have to reset it for you, or you will have to clear the entire system (see page 234

).

10/06/23 14:28:09 31SNA650_237

Bluetooth HandsFreeLink

System Setup This command group allows you to change or customize HFL basic settings.

Toseta4-digitpasscodetolockthe HFLsystemforsecuritypurposes: Press and release the HFL Talk button before a command.

1.

Say ‘‘

System setup

.’’

2.

Say ‘‘

Security

’’ after the prompts.

3.

Follow the HFL prompts and say the 4-digit passcode you want to set.

4.

Follow the HFL prompts to confirm the number.

232

10/06/23 14:28:24 31SNA650_238

Tochangeyoursecuritypasscode: Press and release the HFL Talk button before a command.

1.

2.

Say ‘‘

System setup

.’’

Change passcode

’’ after the

Say ‘‘ prompts.

3.

Follow the HFL prompts and say the new 4-digit passcode.

4.

Follow the HFL prompts to confirm the number.

Toselecteitheraringtoneora promptastheincomingcall notification : Press and release the HFL Talk button before a command.

＊

1.

2.

3.

Say ‘‘

System setup

.’’

Call notification

’’ after the

Say ‘‘ prompts.

Follow the HFL prompts and say Ring tone Prompt ‘‘ .’’ You ’’ for no audible can also say ‘‘ incoming call notification.

’’ or ‘‘ Off

＊

The default setting is a ring tone.

Bluetooth HandsFreeLink

Toactivateordeactivatetheauto transferfunction: If you get into the vehicle while you are on the phone, the call can be automatically transferred to HFL with the ignition switch in the ACCESSORY (I) or ON (II) position.

Press and release the HFL Talk button before a command.

1.

2.

3.

Say ‘‘

System setup

.’’

Auto transfer

Say ‘‘ prompts.

’’ after the

HFL will let you know if auto transfer is on or off, depending on the previous setting. Follow the HFL prompts to change the setting.

CONTINUED

233

10/06/23 14:28:41 31SNA650_239

Bluetooth HandsFreeLink

Toclearthesystem: This operation clears the passcodes, paired phones, all names in the HFL phonebook, and all imported phonebook data.

Quick Language Selection Canadianmodelsonly Toquicklychangethelanguage: Press and release the HFL Talk button before a command.

Press and release the HFL Talk button before a command.

1.

Say the language you want to change to in that language.

1.

Say ‘‘

System setup

.’’

2.

Follow the HFL prompts.

2.

Say ‘‘

Clear

’’ after the prompts.

3.

Follow the HFL prompts to continue to complete the clearing procedure.

You can also clear the system when you have forgotten the passcode and cannot access HFL. When HFL asks you for the passcode, say ‘‘ clear the HFL phonebook and all imported phonebook data will be lost.

System .’’ Paired phones, all names in

234

Change Language Canadianmodelsonly Tochangethesystemlanguage betweenEnglishandFrench: Press and release the HFL Talk button before a command.

1.

2.

Say ‘‘

Change language

.’’

Follow the HFL prompts to change the language to English or French.

If you have not named your paired phone in the language you just selected, HFL will ask you to name it in the current language.

When French is your currently selected language, you can give voice commands in French.

10/06/23 14:28:48 31SNA650_240

Bluetooth