2005 Honda Civic Sedan Owners Manual

Main MenuTable of Contentsst０４／０７／０６　１２：３４：３９　３１Ｓ５Ａ６４０　０１３２　

CONSOLE COMPARTMENT ＊

FRONT DOOR POCKET

TRUNK

SEAT-BACK POCKET ＊

GLOVE BOX

＊

: On LX, U.S. EX, and Canadian Si models

Carrying Cargo

Your vehicle has several convenient storage areas:

Glove box Front door and seat-back pockets Console compartment Trunk Roof-rack (if installed)

However, carrying too much cargo, or improperly storing it, can affect your vehicle’s handling, stability, stopping distance, and tires, and make it unsafe. Before carrying any type of cargo, be sure to read the following pages.

129

Main MenuTable of Contentsst(850

−

750 (5

×

150) = 100 lbs.)

5.

Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity in Step 4.

０４／０７／０６　１２：３４：４９　３１Ｓ５Ａ６４０　０１３３　

Carrying Cargo

Load Limits The maximum load for your vehicle is 850 lbs (395 kg). This figure includes the total weight of all occupants, cargo, and accessories.

Overloading or improper loading can affect handling and stability and cause a crash in which you can be hurt or killed.

Follow all load limits and other loading guidelines in this manual.

130

Steps for Determining Correct Load Limit:

1.

2.

3.

4.

Locate the statement, ‘‘the combined weight of occupants and cargo should never exceed 850
lbs’’ on your vehicle’s placard. [The placard is on the driver’s doorjamb.]

Determine the combined weight of the driver and passengers that will be riding in your vehicle.

Subtract the combined weight of the driver and passengers from 850 pounds or 395 kilograms.

The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the maximum load is 850 lbs and there will be five 150
lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 100 lbs.

Main MenuTable of Contentsst０４／０７／０６　１２：３４：５８　３１Ｓ５Ａ６４０　０１３４　

Carrying Cargo

Carrying Cargo in the Trunk or on a Roof Rack

Distribute cargo evenly on the floor of the trunk, placing the heaviest items on the bottom and as far forward as possible.

If you fold down the back seat, tie down items that could be thrown about the vehicle during a crash or sudden stop.

Carrying Items in the Passenger Compartment

Store or secure all items that could be thrown around and hurt someone during a crash.

Do not put any items on top of the trunk panel. They can block your view and be thrown around the vehicle during a crash.

Be sure items placed on the floor behind the front seats cannot roll under the seats and interfere with the driver’s ability to operate the pedals or the seat.

Keep the glove box closed while driving. If it is open, a passenger could injure their knees during a crash or sudden stop.

If you carry large items that prevent you from closing the trunk lid, exhaust gas can enter the passenger area. To avoid the possibility of poisoning , follow the instructions on page 47

carbon monoxide

131

Main MenuTable of Contentsst０４／０７／０６　１２：３５：０５　３１Ｓ５Ａ６４０　０１３６　

Driving

This section gives you tips on starting the engine under various conditions, and how to operate the manual and automatic transmissions. It also includes important information on parking your vehicle, and the braking system.

Preparing to Drive Starting the Engine Manual Transmission Automatic Transmission Parking Braking System Anti-lock Brakes (ABS) Towing a Trailer

........................ ....................... ................... .............. ........................................... ............................. ............... ...........................

. 134
. 135
. 136
. 138
. 141
. 142
. 143
. 144

133

Main Menust０４／０７／０６　１２：３５：１５　３１Ｓ５Ａ６４０　０１３７　

4.

5.

6.

Check that any items you may be carrying are stored properly or fastened down securely.

9.

Fasten your seat belt. Check that your passengers have fastened their seat belts (see page 15 ).

Check the seat adjustment (see page

76

).

Check the adjustment of the inside and outside mirrors (see page

81

).

When you start the engine, check the gauges and indicator lights in the instrument panel (see page 53

).

7.

Check the steering wheel adjustment (see page ). 68

8.

Make sure the doors are securely closed and locked.

Preparing to Drive

You should do the following checks and adjustments every day before you drive your vehicle.

1.

Make sure all windows, mirrors, and outside lights are clean and unobstructed. Remove frost, snow, or ice.

2.

Check that the hood and trunk are fully closed.

3.

Visually check the tires. If a tire looks low, use a gauge to check its pressure.

134

Main MenuTable of Contentsst０４／０７／０６　１２：３５：２７　３１Ｓ５Ａ６４０　０１３８　

1.

Apply the parking brake.

2.

3.

4.

In cold weather, turn off all electrical accessories to reduce the drain on the battery.

Manual Transmission: Push the clutch pedal down all the way.

Automatic Transmission: Make sure the shift lever is in Park. Press on the brake pedal.

Without touching the accelerator pedal, turn the ignition key to the START (III) position. Do not hold the key in START for more than 15 seconds at a time. If the engine does not start right away, pause for at least 10 seconds before trying again.

The immobilizer system protects your vehicle f rom thef t. If an improperly- coded key (or other device) is used, the engine’s f uel system is disabled. See Immobilizer System

on page

70

5.

6.

If the engine does not start within 15 seconds, or starts but stalls right away, repeat step 4 with the accelerator pedal pressed halfway down. If the engine starts, release pressure on the accelerator pedal so the engine does not race.

If the engine fails to start, press the accelerator pedal all the way downandholdittherewhile starting to clear flooding. If the engine still does not start, return to step 5.

Starting theEngine

The engine is harder to start in cold weather. Also, the thinner air found at altitudes above 8,000 feet (2,400
meters) adds to this problem.

135

Main MenuTable of Contentsst０４／０７／０６　１２：３５：３３　３１Ｓ５Ａ６４０　０１３９　

Manual Transmission

Come to a full stop before you shift into Reverse. You can damage the transmission by trying to shift into Reverse with the vehicle moving. Push down the clutch pedal, and pause for a few seconds before shifting into Reverse, or shift into one of the forward gears for a moment. This stops the gears so they won’t ‘‘grind.’’

When slowing down, you can get extra braking from the engine by shifting to a lower gear. This extra braking can help you maintain a safe speed and prevent your brakes from overheating while going down a steep hill. Before downshifting, make sure the vehicle speed is low enough that you will not activate the engine speed limiter in the lower gear. On EX and LX models in the U.S., and all models in Canada, make sure the engine speed will not go into the tachometer’s red zone in the lower gear before downshifting.

The manual transmission is syn- chronized in all forward gears for smooth operation. It has a lockout so you cannot shift directly from Fifth to Reverse. When shifting up or down, make sure you push the clutch pedal down all the way, shift to the next gear, and let the pedal up gradually. When you are not shifting, do not rest your foot on the clutch pedal. This can cause your clutch to wear out faster.

136

Rapid slowing or speeding up can cause loss of control on slippery surfaces. If you crash, you can be injured.

Use extra care when driving on slippery surfaces.

Main MenuTable of Contentsst０４／０７／０６　１２：３５：４１　３１Ｓ５Ａ６４０　０１４０　

Recommended Shift Points Drive in the highest gear that lets the engine run and accelerate smoothly. This will give you the best fuel economy and effective emis- sions control. The following shift points are recommended:

Shift up

Normal acceleration

1st to 2nd 2nd to 3rd 3rd to 4th 4th to 5th

15 mph (24 km/h) 27 mph (43 km/h) 39 mph (63 km/h) 53 mph (85 km/h)

Engine Speed Limiter OnEXandLXmodelsintheU.S.,and allmodelsinCanada If you exceed the maximum speed for the gear you are in, the engine speed will enter into the tachometer’s red zone. If this occurs, you may feel the engine cut in and out. This is caused by a limiter in the engine’s computer controls. The engine will run normally when you reduce the RPM below the red zone.

Before downshifting, make sure the engine will not go into the tachometer’s red zone.

Manual Transmission

OnDXmodelintheU.S. If you exceed the maximum speed for the gear you are in, you may feel the engine cut in and out. This is caused by a limiter in the engine’s computer controls. The engine will run normally when you reduce the engine speed by upshifting or slowing down.

Before downshifting, make sure the car speed is low enough that you will not activate the engine speed limiter in the lower gear.

137

Main MenuTable of Contentsst０４／０７／０６　１２：３５：５１　３１Ｓ５Ａ６４０　０１４１　

Automatic Transmission

Shift Lever Position Indicators

Shifting

SHIFT LEVER

LX, U.S. EX, and Canadian Si models

Canadian DX model

RELEASE BUTTON

These indicators on the instrument panel show which position the shift lever is in. The ‘‘D’’ indicator comes on for a few seconds when you turn the ignition switch to ON (II). If it flashes while driving (in any shift position), it indicates a possible problem in the transmission. Avoid rapid acceleration and have the trans- mission checked by your dealer as soon as possible.

138

U.S. DX model

To shift from any position, press firmly on the brake pedal and press the release button on the front of the shift lever. You cannot shift out of Park when the ignition switch is in the LOCK (0) or ACCESSORY (I) position.

Main MenuTable of Contentsst０４／０７／０６　１２：３６：０５　３１Ｓ５Ａ６４０　０１４２　

To shift from:

P to R

Do this:

Press the brake pedal and press the release button.

Press the release button.

Move the lever.

R to P N to R D to 2
2 to D D to D D to N D to D N to D R to N

−

This position mechani-

Park (P) cally locks the transmission. Use Park whenever you are turning off or starting the engine. To shift out of Park, you must press on the brake pedal and have your foot off the accelerator pedal.

If you have done all of the above and still cannot move the lever out of Park, see on page 140

Shift Lock Release

Automatic Transmission

To avoid transmission damage, come to a complete stop before shifting into Park. The shift lever must be in Park before you can remove the key from the ignition switch.

suitable gear for the vehicle speed and acceleration. You may notice the transmission shifting up at higher speeds when the engine is cold. This helps the engine warm up faster.

−

Press the brake

Reverse (R) pedal and press the release button to the front of the shift lever to shift from Park to Reverse. To shift from Reverse to Neutral, come to a complete stop and then shift.

−

Use Neutral if you

Neutral (N) need to restart a stalled engine, or if it is necessary to stop briefly with the engine idling. Shift to the Park position if you need to leave your vehicle for any reason. Press on the brake pedal when you are moving the shift lever from Neutral to another gear.

−

Use this position for

Drive (D) your normal driving. The transmission automatically selects a

−

This position is similar

Drive (D ) to D, except only the first three gears are selected. Use D to provide engine braking when going down a steep hill. D can also keep the transmission from cycling between third and fourth gears in stop-and-go driving.

−

Second (2) This position locks the transmission in second gear. It does not downshift to first gear when you come to a stop. Use Second gear:

For more power when climbing. To increase engine braking when going down steep hills. For starting out on a slippery surface or in deep snow.

139

Main MenuTable of Contentsst０４／０７／０６　１２：３６：１６　３１Ｓ５Ａ６４０　０１４３　

Automatic Transmission

Engine Speed Limiter OnEXandLXmodelsintheU.S.,and allmodelsinCanada If you exceed the maximum speed for the gear you are in, the engine speed will enter into the tachometer’s red zone. If this occurs, you may feel the engine cut in and out. This is caused by a limiter in the engine’s computer controls. The engine will run normally when you reduce the RPM below the red zone.

OnDXmodelintheU.S. If you exceed the maximum speed for the gear you are in, you may feel the engine cut in and out. This is caused by a limiter in the engine’s computer controls. The engine will run normally when you reduce the engine speed by upshifting or slowing down.

140

Shift Lock Release Do this if pushing on the brake pedal and pressing the release button does not shift the transmission out of park:

1.

Set the Parking brake.

2.

Remove the key from the ignition switch.

3.

Put a cloth on the edge of the Shift Lock Release slot cover next to the shift lever. Using a small flat- tipped screwdriver or small metal plate, carefully pry on the edge of the cover to remove it.

COVER

4.

Insert the key in the Shift Lock Release slot.

5.

Push down on the key while you press the release button on the shift lever and move the shift lever out of Park to Neutral.

Main MenuTable of Contentsst０４／０７／０６　１２：３６：２９　３１Ｓ５Ａ６４０　０１４４　

RELEASE BUTTON

SHIFT LOCK RELEASE SLOT

6.

Remove the key from the Shift Lock Release slot, then install the cover. Make sure the notch on the cover is on the left side. Return the key to the ignition switch, press the brake pedal, and restart the engine.

If you need to use the Shift Lock Release, it means your vehicle is developing a problem. Have it checked by your dealer.

Automatic Transmission, Parking

Parking Always use the parking brake when you park your vehicle. Make sure the parking brake is set firmly or your vehicle may roll if it is on an incline.

If your vehicle has an automatic transmission, set the parking brake before you put the transmission in Park. This keeps the vehicle from moving and putting pressure on the parking mechanism in the transmission.

Parking Tips

Make sure the moonroof and the windows are closed.

Turn off the lights.

Place any packages, valuables, etc., in the trunk or take them with you.

Lock the doors.

Never park over dry leaves, tall grass, or other flammable materials. The hot three way catalytic converter could cause these materials to catch on fire.

If the vehicle is facing uphill, turn the front wheels away from the curb. If you have a manual transmission, put it in first gear.

If the vehicle is facing downhill, turn the front wheels toward the curb. If you have a manual transmission, put it in reverse gear.

Make sure the parking brake is fully released before driving away. Driving with the parking brake partially set can overheat or damage the rear brakes.

141

Main MenuTable of Contentsst０４／０７／０６　１２：３６：３９　３１Ｓ５Ａ６４０　０１４５　

Braking System

Braking System Your vehicle is equipped with front disc brakes. The brakes on the rear wheels are drum. A power assist helps reduce the effort needed on the brake pedal. The ABS (on models equipped) helps you retain steering control when braking very hard. Resting your foot on the pedal keeps the brakes applied lightly, builds up heat, and reduces their effectiveness. It also keeps your brake lights on all the time, confusing drivers behind you.

Constant application of the brakes when going down a long hill builds up heat and reduces their effective- ness. Use the engine to assist the brakes by taking your foot off the accelerator and downshifting to a lower gear.

142

Check the brakes after driving through deep water. Apply the brakes moderately to see if they feel normal. If not, apply them gently and frequently until they do. Be extra cautious in your driving.

Braking System Design

Front

etc.). If one circuit should develop a problem, you will still have braking at two wheels.

Brake Wear Indicators If the brake pads need replacing, you will hear a distinctive, metallic screeching sound when you apply the brake pedal. If you do not have the brake pads replaced, they will screech all the time. It is normal for the brakes to occasionally squeal or squeak when you apply them.

The hydraulic system that operates the brakes has two separate circuits. Each circuit works diagonally across the vehicle (the left-front brake is connected with the right-rear brake,

Main MenuTable of Contentsst０４／０７／０６　１２：３６：５０　３１Ｓ５Ａ６４０　０１４６　

Anti-lock Brakes OnU.S.EXandCanadianLXandSi models The Anti-lock Brake System (ABS) helps prevent the brakes from locking up and helps you retain steering control by pumping the brakes rapidly; much faster than a person.

Youshouldneverpumpthebrakepedal. Let the ABS work for you by always keeping firm, steady pressure on the brake pedal. This is sometimes referred to as ‘‘stomp and steer.’’

You will feel a pulsation in the brake pedal when the ABS activates, and you may hear some noise. This is normal: it is the ABS rapidly pumpingthebrakes.Ondry pavement, you will need to press on thebrakepedalveryhardbeforethe ABS activates. However, you may feel the ABS activate immediately if you are trying to stop on snow or ice.

ABS Indicator

ABS INDICATOR

If the ABS indicator comes on, the anti-lock function of the braking system has shut down. The brakes still work like a conventional system, but without anti-lock. You should have your dealer inspect your vehicle as soon as possible.

If the ABS indicator comes on while driving, test the brakes as shown on page

.57

Anti-lock Brakes (ABS)

Important Safety Reminders ABS does not reduce the time or distance it takes to stop the vehicle; control during braking.

It only helps with steering

ABS will not prevent a skid that results from changing direction abruptly, such as trying to take a corner too fast or making a sudden lane change.

ABS cannot prevent a loss of stability. Always steer moderately when you are braking hard. Severe or sharp steering wheel movement can still cause your vehicle to veer into oncoming traffic or off the road.

A vehicle with ABS may require a longer distance to stop on loose or uneven surfaces, such as gravel or snow, than a vehicle without anti- lock.

143

Main MenuTable of Contentsst０４／０７／０６　１２：３６：５４　３１Ｓ５Ａ６４０　０１４７　

Towing a Trailer

Your vehicle is not designed to tow a trailer, attempting to do so can void your warranties.

144

Main MenuTable of Contentsst０４／０７／０６　１２：３７：００　３１Ｓ５Ａ６４０　０１４８　

Maintenance

This section explains why it is important to keep your vehicle well maintained and how to follow basic maintenance safety precautions.

This section also includes Maintenance Schedules for normal driving and severe driving conditions, a Maintenance Record, and instruc- tions for simple maintenance tasks you may want to take care of yourself.

If you have the skills and tools to per- form more complex maintenance tasks on your vehicle, you may want to purchase the Service Manual. See page for information on how to obtain a copy, or see your dealer.

215

Maintenance Safety Maintenance Schedule Maintenance Record Fluid Locations Adding Engine Oil Changing the Oil and Filter Engine Coolant Windshield Washers Automatic Transmission Fluid Manual Transmission Fluid Timing Belt Brake and Clutch Fluid Power Steering Fluid Hood Latch Lights Cleaning the Seat Belts Floor Mats Dust and Pollen Filter Wiper Blades Tires Checking the Battery Vehicle Storage

...................... ................. .................... .............................. ........................ ......... .............................. .................... ..... ........ .................................... ................ .................... .................................... ............................................. ................ ..................................... .................. ................................. ............................................... ................... .............................

. 146
. 147
. 151
. 153
. 154
. 155
. 157
. 158
.159
. 160
. 160
. 161
. 162
. 162
. 163
. 169
. 169
. 169
. 170
. 172
. 178
. 179

145

Main Menust０４／０７／０６　１２：３７：１１　３１Ｓ５Ａ６４０　０１４９　

Maintenance Safety

All service items not detailed in this section should be performed by a certified technician or qualified mechanic.

Important Safety Precautions To eliminate potential hazards, read the instructions before you begin, and make sure you have the tools and skills required.

Make sure your vehicle is parked on level ground, the parking brake is set, and the engine is off.

To clean parts, use a commercially available degreaser or parts cleaner, not gasoline.

To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames away from the battery and all fuel-related parts.

Wear eye protection and protective clothing when working

146

with the battery or compressed air.

Injury from moving parts. not run the engine unless instructed to do so.

Do

Improperly maintaining this vehicle or failing to correct a problem before driving can cause a crash in which you can be seriously hurt or killed.

Always follow the inspection and maintenance recommendations, and schedules in this owner’s manual.

Potential Vehicle Hazards

Carbon Monoxide poison from engine exhaust. Be sure there is adequate ventilation whenever you operate the engine.

Burns from hot parts. Let the engine and exhaust system cool before touching any parts.

Failure to properly follow maintenance instructions and precautions can cause you to be seriously hurt or killed.

Always follow the procedures and precautions in this owner’s manual.

Some of the most important safety precautions are given here. However, we cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task.

Main MenuTable of Contentsst０４／０７／０６　１２：３７：２６　３１Ｓ５Ａ６４０　０１５０　

The maintenance schedule assumes you will use your vehicle as normal transportation for passengers and their possessions. You should also follow these recommendation:

Which Schedule to Follow Service your vehicle according to the time and mileage periods on one of the Maintenance Schedules on the following pages.

Driving with a roof rack, or driving in mountainous conditions.

Driving on muddy, dusty, or de- iced roads.

Maintenance Schedule

Avoid exceeding your vehicle’s load limit. This puts excess stress on the engine, brakes, and many other vehicle parts. The load limit is shown on the tire information label on the driver’s doorjamb.

Operate your vehicle on reasonable roads within the legal speed limit.

Drive your vehicle regularly over a distance of several miles (kilometers).

Always use unleaded gasoline with the proper octane rating (see page 122

).

−

Follow the

U.S. Owners Maintenance Schedule for Severe Conditions if you drive your vehicle MAINLY under one or more of the following conditions.

Driving less than 5 miles (8 km) per trip or, in freezing temperatures, driving less than 10
miles (16 km) per trip.

Driving in extremely hot [over 90°F (32°C)] conditions.

Used primarily as a delivery vehicle or taxi that is driven mostly in stop-and-go traffic and/ or parked with the engine idling.

drive

OCCASIONALLY

NOTE: If you only under a ‘‘severe’’ condition, you should follow the Normal Conditions Maintenance Schedule. Canadian Owners Follow the − Maintenance Schedule for Severe Conditions.

147

Main MenuTable of Contentsst０４／０７／０６　１２：３７：３９　３１Ｓ５Ａ６４０　０１５１　

Maintenance Schedule

Servicing Your Vehicle Your authorized dealer knows your vehicle best and can provide competent, efficient service. However, service at a dealer is not mandatory to keep your warranties in effect. Maintenance may be done by any qualified service facility or skilled person to keep your warranties in effect. Keep all the receipts as proof of completion, and have the person who does the work fill out the Maintenance Record. Check your warranty booklet for more information.

We recommend the use of Honda parts and fluids whenever you have maintenance done.

U.S. Vehicles: Maintenance, replacement, or repair of emissions control devices and systems may be done by any automotive repair establishment or individual using parts that are ‘‘certified’’ to EPA standards.

＃

According to state and federal regulations, failure to perform maintenance on the items marked with will not void your emissions warranties. However, all maintenance services should be performed at the recommended time or mileage period to ensure long- term reliability.

148

Owner’s Maintenance Checks Youshouldcheckthefollowing items at the specified intervals. If you are unsure of how to perform any check, turn to the appropriate page listed.

−

−

−

125

Engine oil level Check every time you fill the fuel tank. See page Engine coolant level Check the radiator reserve tank every time you fill the fuel tank. See page 125
Automatic transmission Check the fluid level monthly. See page 159
Brakes Check the fluid level monthly. See page Tires Check the tire pressure monthly. Examine the tread for wear and foreign objects. See page 172
Lights Check the operation of the headlights, parking lights, taillights, high-mount brake light, and license plate lights monthly. See page

161

163

−

−

−

Main MenuTable of Contentsst０４／０７／０６　１２：３８：０５　３１Ｓ５Ａ６４０　０１５２　

Service the items listed at the indicated distance (or time, if given). 90
144

miles x 1,000
km x 1,000

80
128

10
16

20
32

30
48

50
80

40
120
64
192
Check oil and coolant at each fuel stop

70
112

100
160

110
176

60
96

130
208

140
224

150
240

Check inflation and condition once a month

Follow the Normal Maintenance Schedule if the severe driving conditions specified in the Severe Conditions Maintenance Schedule on the next page do not apply.

Check engine oil and coolant Check tires Replace engine oil

Rotate tires (follow pattern on page175) Replace engine oil filter Check front and rear brakes Check parking brake adjustment Inspect the following items:

Tie rod ends, steering gear box, and boots Suspension components Driveshaft boots Brake hoses and lines (including ABS) All fluid levels and condition of fluids Exhaust system ＃ Fuel lines and connections Inspect and adjust drive belts Replace dust and pollen filter Replace air cleaner element Replace spark plugs Inspect valve clearance

＃

Replace automatic transmission fluid ＊ Replace manual transmission fluid

Inspect idle speed Replace timing belt, and inspect auto-tensioner and water pump Replace engine coolant

((OOrr eevveerryy 11 yyeeaarr,, wwhhiicchheevveerr ccoommeess ffiirrsstt))

Every 10,000 miles (16,000 km)

NOTE: If you only OCCASIONALLY drive under a ‘‘severe’’ condition, you should follow the Normal Conditions Maintenance Schedule.

((OOrr eevveerryy 11 yyeeaarr,, wwhhiicchheevveerr ccoommeess ffiirrsstt))

((OOrr eevveerryy 22 yyeeaarrss,, wwhhiicchheevveerr ccoommeess ffiirrsstt))

((OOtthheerrwwiissee aaddjjuusstt oonnllyy iiff nnooiissyy))

((OOrr eevveerryy 66 yyeeaarrss,, wwhhiicchheevveerr ccoommeess ffiirrsstt))

((OOrr eevveerryy 77 yyeeaarrss,, wwhhiicchheevveerr ccoommeess ffiirrsstt))

120,000 miles (192,000 km) or 10 years, then every

60,000 miles (96,000 km) or 5 years

Every 3 years (independent of mileage)

149

Replace brake fluid 1: ＊ ＃

Replace at 120,000 miles (192,000 km) or 6 years, then every 90,000 miles (144,000 km) or 5 years. See information on maintenance and emission warranty on page

148

Main MenuTable of Contentsst０４／０７／０６　１２：３８：３５　３１Ｓ５Ａ６４０　０１５３　

Service the items listed at the indicated distance (or time, if given). 90
144

miles x 1,000
km x 1,000

80
128

10
16

20
32

30
48

50
80

40
120
64
192
Check oil and coolant at each fuel stop

70
112

100
160

110
176

60
96

130
208

140
224

150
240

Check inflation and condition once a month

Every 5,000 miles (8,000 km) or every 6 months,

whichever comes first

Every 10,000 miles (16,000 km)

((OOrr eevveerryy 11 yyeeaarr,, wwhhiicchheevveerr ccoommeess ffiirrsstt))

Follow the Severe Maintenance Schedule if you drive your vehicle MAINLY under one or more of the following conditions:

Driving less than 5 miles (8 km) per trip or, in freezing temperatures, driving less than 10 miles (16 km) per trip. Driving in extremely hot [over 90°F (32°C)] conditions. Extensive idling or long periods of stop and go driving, such as a taxi or a commercial delivery vehicle. Driving with a roof rack, or driving in mountainous conditions. Driving on muddy, dusty, or de-iced roads.

＊

2 :

＊

3 :

for

169

See dust and pollen filter on page replacement information under special driving conditions. Replace at 60,000 miles (96,000 km) or 3
years, then every 30,000 miles (48,000
km) or 2 years. See timing belt on page replacement information under special driving conditions. See information on maintenance and emission warranty on page

160

148

for

((OOrr eevveerryy 11 yyeeaarr,, wwhhiicchheevveerr ccoommeess ffiirrsstt))

Canadian Owners Follow the Maintenance Schedule for Severe ((OOrr eevveerryy 22 yyeeaarrss,, wwhhiicchheevveerr ccoommeess ffiirrsstt)) Conditions. ＊

except in dusty conditions)

Every 15,000 miles (24,000 km) (Use normal schedule

−

1 :

((OOtthheerrwwiissee aaddjjuusstt oonnllyy iiff nnooiissyy))

((OOrr eevveerryy 33 yyeeaarrss,, wwhhiicchheevveerr ccoommeess ffiirrsstt))

((OOrr eevveerryy 77 yyeeaarrss,, wwhhiicchheevveerr ccoommeess ffiirrsstt))

120,000 miles (192,000 km) or 10 years, then every

60,000 miles (96,000 km) or 5 years

Every 3 years (independent of mileage)

＃

Check engine oil and coolant Check tires Replace engine oil

Rotate tires (follow pattern on page175) Replace engine oil filter Inspect front and rear brakes Lubricate all hinges, locks and latches Visually inspect the following items:

Tie rod ends, steering gear box, and boots Suspension components, Driveshaft boots

Check parking brake adjustment Inspect the following items:

Brake hoses and lines (including ABS) All fluid levels and condition of fluids Exhaust system , Fuel lines and connections Lights and controls/vehicle underbody

＃

＃

Inspect and adjust drive belts Replace dust and pollen filter ＊ Replace air cleaner element

Replace spark plugs Inspect valve clearance

Replace automatic transmission fluid ＊ Replace manual transmission fluid

Inspect idle speed Replace timing belt water pump Replace engine coolant

＃ ＊

, inspect auto-tensioner and

Replace brake fluid 150

Main MenuTable of Contentsst０４／０７／０６　１２：３８：４２　３１Ｓ５Ａ６４０　０１５４　

Maintenance Record

(for Normal and Severe Schedules)

You or the servicing dealer can record all completed maintenance here, whether you follow the schedule for normal conditions (page conditions (page

150 ). Keep the receipts for all work done on your vehicle.

149

5,000 mi 8,000 km

10,000 mi 16,000 km

15,000 mi 24,000 km

20,000 mi 32,000 km (or 1 year)

25,000 mi 40,000 km

30,000 mi 48,000 km

35,000 mi 56,000 km

40,000 mi 64,000 km (or 2 years)

Signature or dealer stamp

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

45,000 mi 72,000 km

50,000 mi 80,000 km

55,000 mi 88,000 km

60,000 mi 96,000 km (or 3 years)

65,000 mi 104,000 km

70,000 mi 112,000 km

75,000 mi 120,000 km

80,000 mi 128,000 km (or 4 years)

Signature or dealer stamp mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

) or severe

151

Main MenuTable of Contentsst０４／０７／０６　１２：３８：４９　３１Ｓ５Ａ６４０　０１５５　

Maintenance Record

(forNormalandSevereSchedules)

Signature or dealer stamp mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

85,000 mi 136,000 km

90,000 mi 144,000 km

95,000 mi 152,000 km

100,000 mi 160,000 km (or 5 years)

105,000 mi 168,000 km

110,000 mi 176,000 km

115,000 mi 184,000 km

120,000 mi 192,000 km (or 6 years)

152

125,000 mi 200,000 km

130,000 mi 208,000 km

135,000 mi 216,000 km

140,000 mi 224,000 km (or 7 years)

145,000 mi 232,000 km

150,000 mi 240,000 km

155,000 mi 248,000 km

160,000 mi 256,000 km (or 8 years)

Signature or dealer stamp mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

Main MenuTable of Contentsst０４／０７／０６　１２：３８：５３　３１Ｓ５Ａ６４０　０１５６　

ENGINE OIL DIPSTICK (Orange loop)

ENGINE OIL FILL CAP

AUTOMATIC TRANSMISSION FLUID DIPSTICK (Yellow loop)

ENGINE COOLANT RESERVOIR

RADIATOR CAP

Fluid Locations

BRAKE FLUID (Gray cap)

CLUTCH FLUID (Manual Transmission only) (Gray cap)

WASHER FLUID (Blue cap)

POWER STEERING FLUID (Red cap)

153

Main MenuTable of Contentsst０４／０７／０６　１２：３９：０２　３１Ｓ５Ａ６４０　０１５７　

Adding Engine Oil

ENGINE OIL FILL CAP

Recommended Engine Oil Oil is a major contributor to your engine’s performance and longevity. Always use a premium-grade 5W-20
detergent oil displaying the API Certification Seal. This seal indicates the oil is energy conserving, and that it meets the American Petroleum Institute’s latest requirements.

Honda Motor Oil is the preferred 5W-20 lubricant for your vehicle. It is highly recommended that you use Honda Motor Oil in your vehicle for optimum engine protection. Make sure the API Certification Seal says ‘‘For Gasoline Engines.’’

The oil viscosity or weight is provided on the container’s label. 5W-20 oil is formulated for year- round protection of your Honda to improve cold weather starting and fuel economy.

Unscrew and remove the engine oil fill cap on top of the valve cover. Pour in the oil slowly and carefully so you do not spill. Clean up any spills immediately. Spilled oil could damage components in the engine compartment. Install the engine oil fill cap, and tighten it securely. Wait a few minutes, and recheck the oil level. Do not fill above the upper mark; you could damage the engine.

154

API CERTIFICATION SEAL

Ambient Temperature

Main MenuTable of Contentsst０４／０７／０６　１２：３９：１２　３１Ｓ５Ａ６４０　０１５８　

Adding Engine Oil, Changing the Oil and Filter

Synthetic Oil You may use a synthetic motor oil if it meets the same requirements given for a conventional motor oil: it displays the API Certification Seal, and it is the proper weight. You must follow the oil and filter change intervals given on the maintenance schedule.

Engine Oil Additives Your vehicle does not require any oil additives. Additives may adversely affect your engine’s or transmission’s performance and durability.

Changing the Oil and Filter Always change the oil and filter according to the recommendations in the maintenance schedule. The oil and filter collect contaminants that can damage your engine if they are not removed regularly.

Changing the oil and filter requires special tools and access from underneath the vehicle. The vehicle should be raised on a service station- type hydraulic lift for this service. Unless you have the knowledge and proper equipment, you should have this maintenance done by a skilled mechanic.

DRAIN BOLT

WASHER

1.

2.

Run the engine until it reaches normal operating temperature, then shut it off.

Open the hood and remove the engine oil fill cap. Remove the oil drain bolt and washer from the bottom of the engine. Drain the oil into an appropriate container.

155

Main MenuTable of Contentsst０４／０７／０６　１２：３９：２５　３１Ｓ５Ａ６４０　０１５９　

Changing the Oil and Filter

OIL FILTER

5.

Put a new washer on the drain bolt, then reinstall the drain bolt. Tighten the drain bolt to :

(U.S.: DX, LX, Canada: DX, LX) 33 lbf·ft (44 N·m , 4.5 kgf·m)

(U.S.: EX, Canada: Si) 29 lbf·ft (39 N·m , 4.0 kgf·m)

6.

Refill the engine with the recommended oil.

3.

Remove the oil filter and let the remaining oil drain. A special wrench (available from your dealer) is required.

Engine oil change capacity (including filter): (U.S.: DX, LX, Canada: DX, LX) 3.4 US qt (3.2 )

4.

Install a new oil filter according to the instructions that come with it.

(U.S.: EX, Canada: Si) 3.7 US qt (3.5 )

156

7.

8.

9.

Reinstall the engine oil fill cap. Start the engine. The oil pressure indicator should go out within 5
seconds. If it does not, turn off the engine and check your work.

Let the engine run for several minutes, then check the drain bolt and oil filter for leaks.

Turn off the engine, let it sit for several minutes, then check the oil level on the dipstick. If necessary, add more oil.

Improper disposal of engine oil can be harmf ul to the environment. If you change your own oil, please dispose of the used oil properly. Put it in a sealed container, and take it to a recycling center. Do not discard it in a trash bin or dump it on the ground.

Main MenuTable of Contentsst０４／０７／０６　１２：３９：３４　３１Ｓ５Ａ６４０　０１６０　

Engine Coolant

If Honda antifreeze/coolant is not available, you may use another major-brand non-silicate coolant as a temporary replacement. Make sure it is a high-quality coolant recommended for aluminum engines. Continued use of any non-Honda coolant can result in corrosion, causing the cooling system to malfunction or fail. Have the cooling system flushed and refilled with Honda antifreeze/coolant as soon as possible.

If the reserve tank is completely empty, you should also check the coolant level in the radiator.

Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you.

Always let the engine and radiator cool down before removing the radiator cap.

Adding Engine Coolant

RESERVE TANK

If the coolant level in the reserve tank is at or below the MIN line, add coolant to bring it up to between the MIN and MAX lines. Inspect the cooling system for leaks. Always use Honda All Season Antifreeze/Coolant Type 2. This coolant is pre-mixed with 50 percent antifreeze and 50 percent water. Never add straight antifreeze or plain water.

157

Main MenuTable of Contentsst０４／０７／０６　１２：３９：４８　３１Ｓ５Ａ６４０　０１６１　

Engine Coolant, Windshield Washers

4.

The coolant level should be up to the base of the filler neck. Add coolant if it is low. Pourthecoolantslowlyand carefully so you do not spill. Clean up any spill immediately; it could damage components in the engine compartment.

5.

Put the radiator cap back on and tighten it.

6.

Pour coolant into the reserve tank. Fill it to halfway between the MAX and MIN marks. Put the cap back on the reserve tank.

Do not add any rust inhibitors or other additives to your vehicle’s cooling system. They may not be compatible with the coolant or engine components.

RADIATOR CAP

1.

Make sure the engine and radiator are cool.

2.

Relieve any pressure in the cooling system by turning the radiator cap counterclockwise, without pressing down.

3.

Remove the radiator cap by pushing down and turning counterclockwise.

158

The low washer

Windshield Washers Check the fluid level in the windshield washer reservoir at least monthly during normal use. OnCanadianmodels: level indicator comes on when the level is low (see page Fill the reservoir with a good-quality windshield washer fluid. This increases the cleaning capability and prevents freezing in cold weather. When you refill the reservoir, clean the edges of the windshield wiper blades with windshield washer fluid