1994 Honda Civic Coupe Owners Manual

child restraint. Do not use it for any other purpose.

Driver and Passenger Safety

Main MenuTable of ContentsstAlcohol and Drugs

Driving a car requires your full attention and alertness. Traffic conditions change rapidly. You must be able to react just as rapidly. Alcohol or drugs directly affect your alertness and ability to react. Even prescription and non-prescription medicines can have this effect.

There are laws that deal with drunken driving. These laws define how much alcohol it takes in your system to be legally "drunk." However, your judgment and reaction time get worse with every drink - even the first one.

The safest thing you can do is never drink and drive. This can be done if you plan ahead. If you know you are going to be drinking, make plans to ride with a friend who will not be drinking.

What if you find that you've been drinking and cannot get a ride from a friend? Find alternative transportation. Call a taxi. Take a bus. Many communities have transportation services devoted to shuttling people who have been drinking.

If you have no choice but to drive, stop drinking and give yourself lots of time to sober up. Time is the only thing that can make you sober. Things like coffee or a cold shower don't speed up the process.

If you see friends trying to get behind the wheel after drinking, stop them. Drive them yourself or arrange other transportation. If you think you are interfering, remember that your interference will keep them from sharing the road with you.

Driver and Passenger Safety

Main MenuTable of ContentsstYour car's exhaust contains carbon monoxide gas. You should have no problem with carbon monoxide entering the car in normal driving if you maintain your car properly. Have the exhaust system inspected for leaks whenever:

The car is raised for an oil change. You notice a change in the sound of the exhaust. The car was in an accident that may have damaged the underside.

Carbon monoxide gas is toxic. Breathing it can cause unconsciousness and can even kill you.

Avoid any enclosed areas or activities that expose you to carbon monoxide.

High levels of carbon monoxide can collect rapidly in enclosed areas, such as a garage. Do not run the engine with the garage door closed. Even with the door open, run the engine only long enough to move the car out of the garage.

Carbon Monoxide Hazard

With the trunk lid open, air flow can pull exhaust gas into the trunk. This can get into your car's interior and create a hazardous condition. If you must drive with the trunk lid open, open all the windows and set the heating and cooling system as shown below.

If you must sit in your parked car, even in an unconfined area, with the engine running, adjust the heating and cooling system as follows:

1. Push the

button.

2. Select the

mode.

3. Turn the fan on high speed.

4. Set the temperature control to

a comfortable setting.

Driver and Passenger Safety

Main MenuTable of ContentsstSafety Labels

These labels are in the locations shown. They warn you of potential hazards that could cause serious injury. Read these labels carefully and don't remove them.

If a label comes off or becomes hard to read, contact your Honda dealer for a replacement.

Driver and Passenger Safety

Main MenuTable of ContentsstThis section gives information about the controls and displays that contribute to the daily operation of your Honda. All the essential controls are within easy reach.

Control Locations . . . . . . . . . . .. 28
Indicator Lights . . . . . . . . . . . . .. 29
Gauges . . . . . . . . . . . . . . . . . . . .. 34
Speedometer . . . . . . . . . . . . .. 34
Tachometer . . . . . . . . . . . . . .. 34
Odometer . . . . . . . . . . . . . . .. 34
Trip Meter . . . . . . . . . . . . . . .. 34
Fuel Gauge . . . . . . . . . . . . . . .. 35
Temperature Gauge . . . . . . .. 35

Controls Near the

Steering Wheel . . . . . . . . . . . .. 36
Headlights . . . . . . . . . . . . . . .. 37
Daytime Running Lights . . .. 37
Instrument Panel Brightness 38
Turn Signals . . . . . . . . . . . . .. 38
Windshield Wipers . . . . . . .. 39
Windshield Washers . . . . . .. 39
Hazard Warning . . . . . . . . . .. 40
Rear Window Defogger . . . .. 40
Steering Wheel Adjustment . 41
Steering Wheel Controls . . . . .. 42
Cruise Control . . . . . . . . . . .. 42
Horn . . . . . . . . . . . . . . . . . . . .. 45

Instruments and Controls

Keys and Locks . . . . . . . . . . . . .. 45
Keys . . . . . . . . . . . . . . . . . . . .. 45
Ignition Switch . . . . . . . . . . .. 46
Door Locks . . . . . . . . . . . . . .. 47
Power Door Locks . . . . . . . .. 47
Trunk . . . . . . . . . . . . . . . . . . .. 48
Seat Adjustments . . . . . . . . . . .. 49
Front Seat Adjustments . . .. 49
Folding Rear Seat . . . . . . . . .. 50
Power Windows . . . . . . . . . . . .. 51
Moonroof . . . . . . . . . . . . . . . . . .. 52
Sunshade . . . . . . . . . . . . . . . .. 53
Mirrors . . . . . . . . . . . . . . . . . . . .. 53
Parking Brake . . . . . . . . . . . . . .. 55
Glove Box . . . . . . . . . . . . . . . . . .. 55
Digital C l o c k . . . . . . . . . . . . . . . .. 56
Beverage Holder . . . . . . . . . . . .. 57
Vanity Mirror . . . . . . . . . . . . . . .. 57
Cigarette Lighter . . . . . . . . . . .. 58
Ashtrays . . . . . . . . . . . . . . . . . . .. 58
Interior Light . . . . . . . . . . . . . . .. 59

Instruments and Controls

Main MenustMIRROR CONTROLS

HEATING/ COOLING CONTROL

AUDIO SYSTEM

DIGITAL CLOCK

Control Locations

DOOR LOCK SWITCH

POWER WINDOW SWITCH

FUEL FILL DOOR RELEASE

TRUNK RELEASE HANDLE

Instruments and Controls

Main MenuTable of ContentsstThe instrument panel has many indicators to give you important information about your car.

Lamp Check Many of the indicator lights come on when you turn the ignition switch ON (II), allowing you to see that they are working. The instrument panel should look like the illustration. If an indicator does not light during this test, it cannot alert you if that system develops a problem. Have the dealer check your car for burned-out bulbs or other problems.

* The U.S. EX with ABS option instrument panel is shown. Differences for the Canadian model are noted in the text.

HIGH BEAM INDICATOR

CHARGING SYSTEM INDICATOR

LOW OIL PRESSURE INDICATOR

Indicator Lights

PARKING BRAKE AND BRAKE SYSTEM LIGHT*

ANTI-LOCK BRAKE SYSTEM INDICATOR

CRUISE CONTROL INDICATOR

SUPPLEMENTAL RESTRAINT SYSTEM INDICATOR

Automatic Transmission Shown

MALFUNCTION INDICATOR LAMP*

TRUNK-OPEN INDICATOR

SEAT BELT REMINDER LIGHT

Instruments and Controls

Main MenuTable of ContentsstIndicator Lights

HIGH BEAM INDICATOR

CHARGING SYSTEM INDICATOR

LOW OIL PRESSURE INDICATOR

PARKING BRAKE AND BRAKE SYSTEM LIGHT*

ANTI-LOCK BRAKE SYSTEM INDICATOR

CRUISE CONTROL INDICATOR

SUPPLEMENTAL RESTRAINT SYSTEM INDICATOR

Automatic Transmission Shown

Instruments and Controls

MALFUNCTION INDICATOR LAMP*

TRUNK-OPEN INDICATOR

SEAT BELT REMINDER LIGHT

Seat Belt Reminder Light

This indicator lights when you turn the ignition ON (II). It is a reminder to you and your passengers to protect yourselves by fastening the seat belts. A beeper also sounds if you have not fastened your seat belt.

If you do not fasten your seat belt, the beeper will stop after a few seconds but the light stays on until you do. Both the light and the beeper stay off if you fasten your seat belt before turning on the ignition.

* The U.S. EX with ABS option instrument panel is shown. Differences for the Canadian model are noted in the text.

Main MenuTable of ContentsstCharging System Indicator

This light indicates the battery is not being charged. It should come on when the ignition is ON (II), and go out after the engine starts. If this light comes on while driving, the battery is not being charged. Turn to page 174 for information about what to do.

Low Oil Pressure Indicator This indicator lights when the oil pressure in the engine drops low enough to cause damage. It should light when the ignition is ON (II) and go out after the engine starts. If this light comes on when the engine is running, there is a possibility of serious engine damage. Safely pull to the side of the road and shut off the engine as soon as you can. Turn to page 173 for instructions and precautions on checking the engine.

Indicator Lights

Canada

U.S. BRAKE

Parking Brake and Brake System Indicator Light

This light has two functions:

1. It lights as a reminder that

you have set the parking brake. Driving with the parking brake set can damage the brakes and tires. It will also cause the anti-lock brake system to turn off on cars with the ABS option. (See page 102).

2.

It can indicate the brake fluid level is low if it remains lit after you release the parking brake or comes on while driving. This is normally due to worn brake pads. Have your dealer check the braking system for worn pads or fluid leaks.

Instruments and Controls

Main MenuTable of ContentsstIndicator Lights

S R S

Supplemental Restraint System Indicator

The SRS light normally comes on for a few seconds when you turn the ignition ON (II). If it doesn't, or it stays on after the engine starts, something is wrong with the Supplemental Restraint System. It may also flash on and off to indicate a problem.

If you see any of these indications, the airbags may not work when needed in an accident. Take the car to your dealer promptly for diagnosis and service.

Instruments and Controls

A B S

Anti-Lock Brake System (ABS) Indicator

On U.S. EX with option package (see page 188)

This light normally comes on when you turn the ignition ON (II) and goes off after the engine starts. If it comes on at any other time, there is a problem in the ABS. If this happens, stop the car in a safe place and turn off the engine. Reset the system by restarting the engine. Watch the ABS light. If it does not go off, or comes back on again while driving, take the car to your dealer to have it checked. With the light on, your car still has normal braking ability but no anti-lock.

U.S.: Malfunction Indicator Lamp Canada: Check Engine Light

This light comes on for a few seconds when you turn the ignition switch ON (II). If it comes on at any other time, it indicates one of the engine's emissions control systems may have a problem. Turn to page 175 for information about what to do.

Trunk-Open Indicator

This light comes on if the trunk lid is not closed tightly.

Main MenuTable of ContentsstTurn Signal and Hazard Warning Indicators

The left or right turn signal light blinks when you signal a lane change or turn. If the light does not blink or blinks rapidly, it usually means one of the turn signal bulbs is burned out (see page 146). Replace it as soon as possible, since other drivers cannot see that you are signaling.

When you turn on the Hazard Warning switch, both turn signal lights blink. All turn signals on the outside of the car should flash.

High Beam Indicator

This light comes on with the high beam headlights. See page 37
for information on the headlight controls.

Canada Daytime Running D R L Lights (DRL) Indicator On Canadian models, this indicator comes on with reduced brightness when the Daytime Running Lights (DRL) are on. (See page 37).

Cruise Control Indicator

CRUISE CONTROL Only on cars equipped with cruise control system This lights when you set the cruise control. See page 42 for information on operating the cruise control.

Indicator Lights

Shift Lever Position Indicator (Automatic Transmission only)

This indicator shows which shift position the lever is in.

Instruments and Controls

Main MenuTable of ContentsstGauges

TACHOMETER

SPEEDOMETER

FUEL GAUGE TEMPERATURE

GAUGE

ODOMETER

TRIP METER

TRIP METER RESET BUTTON

Tachometer On U.S. EX and Canada Si models The tachometer shows the engine speed in revolutions per minute (rpm). To protect the engine from damage, never drive with the tachometer needle in the red zone.

Automatic Transmission Shown Speedometer U.S. Models This shows your speed in miles per hour. The smaller inner numbers are the speed in kilometers per hour.

Canadian Models This shows your speed in kilometers per hour. The smaller inner numbers are the speed in miles per hour.

Instruments and Controls

Odometer The odometer shows the total distance your car has been driven. It measures miles in U.S. models and kilometers in Canadian models. It is illegal under federal law (in the U.S.) and provincial regulations (in Canada) to disconnect, reset, or alter the odometer with the intent to change the number of miles or kilometers indicated.

Trip Meter This meter shows the number of miles (U.S.) or kilometers (Canada) driven since you last reset it. To reset it, push the trip meter reset button.

Main MenuTable of ContentsstTACHOMETER

SPEEDOMETER

FUEL GAUGE

TEMPERATURE GAUGE

ODOMETER Automatic Transmission Shown Fuel Gauge This shows how much fuel you have. It is most accurate when the car is on level ground. It may show slightly more or less than the actual amount when you are driving on curvy or hilly roads.

TRIP METER TRIP METER

RESET BUTTON

The gauge stays at the same fuel level reading after you turn off the ignition. When you add fuel, the gauge slowly changes to the new reading after you turn the ignition back ON (II).

Gauges

Temperature Gauge This shows the temperature of the engine's coolant. During normal operation, the pointer should rise from the bottom white mark to about the middle of the gauge. In severe driving conditions, such as very hot weather or a long period of uphill driving, the pointer may rise to the upper white mark. If it reaches the red (Hot) mark, pull safely to the side of the road. Turn to page 120 for instructions and precautions on checking the engine's cooling system.

Instruments and Controls

Main MenuTable of ContentsstCRUISE CONTROL

HAZARD WARNING LIGHTS

REAR WINDOW DEFOGGER

Controls Near the Steering Wheel

The two levers on the steering column contain controls for driving features you use most often. The left lever controls the turn signals, headlights, and high beams. The right lever controls the windshield wipers.

The rear window defogger switch is on the dashboard to the right of the steering column.

The controls under the left air vent are for the moonroof, mirrors, cruise control and instrument panel brightness.

INSTRUMENT PANEL BRIGHTNESS

MOONROOF

The lever on the underside of the steering column allows you to tilt the steering wheel.

MIRROR

CONTROLS

Instruments and Controls

HEADLIGHTS/ TURN SIGNALS

TILT ADJUSTMENT WINDSHIELD

WIPERS/WASHERS

Main MenuTable of ContentsstControls Near the Steering Wheel

Headlights

The rotating switch on the left lever controls the lights. Turning this switch to the first position " " turns on the parking lights, tail lights, instrument panel lights, side-marker lights, and rear license plate lights. Turning the switch to the second position " turns on the headlights.

To change between low beams and high beams, pull the turn signal lever toward you until you hear a click, then let go. The high beam indicator will light (see page 33).

To flash the high beams, pull back and hold the turn signal lever. Release the lever and the high beams will go off.

The high beams will stay on for as long as you hold the lever, no matter what position the headlight switch is in.

Daytime Running Lights Canadian Models

With the headlight switch off, the high beam headlights come on with reduced brightness when you turn the ignition switch to ON (II) and release the parking brake. They remain on until you turn the ignition off, even if you set the parking brake.

The headlights revert to normal operation when you turn them on with the switch.

Instruments and Controls

Main MenuTable of ContentsstControls Near the Steering Wheel

Instrument Panel Brightness

Turn Signals

To signal a lane change, push lightly on the turn signal lever in the proper direction and hold it. The lever will return to the center position as soon as you release it.

The dial on the dashboard to the left of the instrument panel controls the brightness of the instrument panel lights. Turn the dial to adjust the brightness.

TURN SIGNAL LEVER Signal a turn or lane change with this lever. Push down on the lever to signal a left turn, and up to signal a right turn. If you push it up or down all the way, the turn signal continues to blink even when you release the lever. It shuts off automatically as you complete the turn.

Instruments and Controls

Main MenuTable of ContentsstWindshield Wipers

Windshield Washers

Controls Near the Steering Wheel

To operate the wipers in mist mode, push the control lever down. The wipers run at high speed until you release the lever. This gives you a quick way to clear the windshield.

The right lever controls the wind- shield wipers and washers. The rotary switch at the end of the lever has three positions: INT - intermittent LO - low speed HI - high speed

In intermittent, the wipers operate every few seconds. In low speed and high speed, the wipers run continuously.

U.S. Models To clean the windshield, pull the wiper control lever toward you. The washers spray until you release the lever.

Canadian Models The wipers run at low speed while you're pulling the lever, then complete one more sweep of the windshield after you release it.

Instruments and Controls

Main MenuTable of ContentsstControls Near the Steering Wheel

Hazard Warning

Rear Window Defogger

Make sure the rear window is clear and you have good visibility before starting to drive.

The defogger wires on the inside of the rear window can be accidentally damaged. When cleaning the glass, always wipe side to side.

Push the red button under the clock to turn on the hazard warning lights (four-way flashers). This causes all four outside turn signals and both indicators in the instrument panel to flash. Use the hazard warning lights if you need to park in a dangerous area near heavy traffic, or if your car is disabled.

The rear window defogger will clear fog, frost, and thin ice from the window. Push the defogger button to turn it on and off. The light in the button lights to show the defogger is on. If you do not turn it off, the defogger will shut itself off after about 25 minutes. It also shuts off when you turn off the ignition. You have to turn it on again when you restart the car.

Instruments and Controls

Main MenuTable of ContentsstControls Near the Steering Wheel

Steering Wheel Adjustment You can adjust the steering wheel height to suit your preference. Do this before you begin driving.

Adjusting the steering wheel position while driving may cause you to lose control of the car and be seriously injured in a crash.

Adjust the steering wheel when the car is stopped.

1. Adjust the seat so you are a

comfortable distance from the pedals and can operate them safely.

2. The lever to tilt the steering wheel is under the steering column to the left. Push this lever all the way down.

3. Move the steering wheel up or down to the desired position. Position the wheel so you can see all the instrument panel gauges and warning lights. Push the lever up to lock the steering wheel in that position.

4. Make sure you have securely locked the steering wheel in place by trying to move it up and down.

Instruments and Controls

Main MenuTable of ContentsstSteering Wheel Controls

Cruise Control Available only on EX in the U.S., and Si model in Canada

Cruise control allows you to maintain a set speed above 25 mph (40 km/h) without keeping your foot on the accelerator pedal. It is for cruising on straight, open highways. It is not recommended for conditions such as city driving, winding roads, slippery roads, heavy rain, or bad weather. You should have full control of the car under those conditions.

Improper use of the cruise control can lead to a crash.

Use the cruise control only when traveling on open highways in good weather.

Instruments and Controls

Using the Cruise Control

NOTICE

The cruise control, as it operates, moves the accelerator pedal. You can damage your car's accelerator mechanism by resting your foot under the pedal and blocking the movement.

1. Push in the Cruise Control Master Switch to the left of the steering column. The indicator in the switch will light.

2. Accelerate to the desired

cruising speed above 25 mph (40 km/h).

Main MenuTable of ContentsstRESUME/ accel SET/decel

3. Press and hold the SET/decel button on the steering wheel until the CRUISE CONTROL light on the instrument panel comes on. This shows the system is now activated.

The set speed may vary slightly, particularly on hills.

Changing the Set Speed You can increase the set cruising speed in either of two ways:

Press and hold the RESUME/accel button. The car will accelerate slowly. When you reach the desired cruising speed, release the button. Push on the accelerator pedal. Accelerate to the desired cruising speed and press the SET/decel button.

You can decrease the set cruising speed in either of two ways:

Press and hold the SET/decel button. The car will decelerate. Release the button when you reach the desired speed.

Steering Wheel Controls

Tap the brake or clutch pedal lightly with your foot. The CRUISE CONTROL light on the instrument panel will go out. When the car slows to the desired speed, press the SET/decel button. The car will then maintain the desired speed.

Even with the cruise control turned on, you can still use the accelerator pedal to speed up for passing. After completing the pass, take your foot off the accelerator pedal. The car will return to the set cruising speed.

Resting your foot on the brake or clutch pedal will cause the cruise control to cancel.

Instruments and Controls

Main MenuTable of ContentsstSteering Wheel Controls

Canceling the Cruise Control Any of these actions cause the cruise control to cancel.

Tap the brake or clutch pedal. Press the SET/decel and RESUME/accel buttons at the same time. Press the Cruise Control Master Switch.

When you tap the brake or clutch pedal (manual transmission cars), or press the SET and RESUME buttons at the same time, the CRUISE CONTROL light on the instrument panel will go out and the car will begin to slow down. You can use the accelerator pedal in the normal way.

If you use the brake or clutch pedal to cancel cruise control, the system retains the previously set cruising speed. To return to that

Instruments and Controls

speed, accelerate to above 25
mph (40 km/h) and press the RESUME/accel button until the CRUISE CONTROL light comes on. The car will accelerate to the same cruising speed as before.

If you cancel cruise control by pressing the SET and RESUME BUTTONS at the same time, the previously set cruising speed is erased. To use the cruise control, accelerate to the desired cruising speed and press the SET/decel button.

Pressing the Cruise Control Master Switch turns the system completely off and erases the previous cruising speed from memory. To use the system again, refer to Using the Cruise Control.

Main MenuTable of ContentsstSteering Wheel Controls, Keys and Locks

Horn

Keys

HORN BUTTONS

Press either of the buttons on the steering wheel spokes to sound the horn.

KEY

NUMBER PLATE

VALET

KEY

MASTER

KEY

Your car comes with two kinds of keys: a master key and a valet key. The master key fits all locks on your car.

Ignition Doors Trunk Trunk release handle Rear seat trunk access

The valet key only works the ignition and the door locks. You can keep the trunk, trunk release handle and rear seat trunk access locked when you leave your car and valet key at a parking facility. (See Trunk, page 48.)

You should have received a key number plate with your set of keys. You will need this number if you have to get a lost key replaced. Record this number and keep the plate in a safe place. When replacing keys, use only Honda- approved key blanks.

Instruments and Controls

Main MenuTable of ContentsstKeys and Locks

Ignition Switch

The ignition switch is on the right side of the steering column. It has four positions:

LOCK (0) ACCESSORY (I) ON (II) START (III)

Instruments and Controls

LOCK (0) — You can insert or remove the key only in this position. When you turn the key from LOCK to ACCESSORY, you may have to turn the steering wheel to release the anti-theft lock. To switch from ACCESSORY to LOCK, you must push the key in slightly as you turn it. If your car has an automatic transmission, it must also be in Park. The anti-theft lock will lock the steering column when you remove the key.

Removing the key from the ignition switch while driving locks the steering. This can cause you to lose control. Remove the key from the ignition switch only when parked.

ACCESSORY (I) — In this position, you can operate the audio system and cigarette lighter.

ON (II) — This is the normal key position when driving. All features and accessories on the car are usable. Several of the lights on the instrument panel come on as a test when you turn the ignition switch from ACCESSORY to ON (see page 29).

START (III) — Use this position only to start the engine. The switch returns to ON when you let go of the key.

You will hear a reminder beeper if you open either front door with the key in the LOCK or ACCESSORY position. Remove the key to turn it off.

Main MenuTable of ContentsstDoor Locks

Power Door Locks

Available on U.S. EX model This allows control of both door locks from the driver's door. Push the master door lock switch down to lock both doors and up to unlock them.

Each door has a lock tab next to the inside door handle. Push the tab forward to lock the door, and pull it backward to unlock.

To lock the passenger's door when getting out of the car, push the lock tab forward and close the door. To lock the driver's door, pull the outside door handle and push the lock tab forward. Release the handle; then, close the door.

Keys and Locks

Both doors lock when you push the lock tab on the driver's door. Only the driver's door unlocks when you use the key or lock tab. To unlock the passenger's door, use the master door lock switch or the lock tab on each door.

The doors can also be locked and unlocked from the outside with the key.

Instruments and Controls

Main MenuTable of ContentsstKeys and Locks

Trunk

TRUNK RELEASE HANDLE

You can open the trunk in two ways:

To close the trunk, press down on the trunk lid.

Pull the trunk release handle to the left of the driver's seat. Use the master key to open the trunk lock. The valet key does not work in this lock.

See page 90 for cargo loading and weight-limit information. Keep the trunk lid closed at all times while driving to avoid damaging the lid and getting exhaust gas in the interior. See Carbon Monoxide Hazard on page 25.

MASTER KEY

To protect items in the trunk when you need to give the key to someone else, lock the trunk release handle with the master key and give the other person the valet key.

Instruments and Controls

Main MenuTable of ContentsstAdjust the seat before you start driving.

Front Seat Adjustments

To adjust the seat forward and backward, pull up on the lever under the seat cushion's front edge. Move the seat to the desired position and release the lever. Try to move the seat to make sure it is locked in position.

To change the angle of the seat- back, pull up on the lever on the outside of the seat bottom. Move the seat-back to the desired position and release the lever. Let the seat-back latch in the new position.

Seat Adjustments

Reclining the seat-back can decrease the protection you get from your seat belt in a crash.

You can slide under the seat belt and be seriously injured.

Adjust the seat-back to an upright position and sit well back in the seat.

Instruments and Controls

Main MenuTable of ContentsstFolding Rear Seat

Rear Seat Access

Folding Rear Seat

Passenger side only To get in or out of the rear seat, pull up on the lever at the side of the front passenger's seat. The seat-back will fold down and the front passenger's seat will move forward.

The seat will lock in place when it is pushed back.

The back of the rear seat folds down, giving you direct access to the trunk. The seat-back can be released from inside the car or inside the trunk.

To release the seat-back from inside the trunk, pull the release loop under the rear shelf. Push the seat-back down; then, let go of the loop.

To fold down the seat-back from inside the car, insert the master key in the lock on the rear shelf. Turn the key clockwise, pull down the top of the seat-back; then, release the key.

To lock the seat-back upright, push it firmly against the rear shelf. Make sure it is latched in place by pulling on the top of the seat.

Instruments and Controls

Main MenuTable of ContentsstFolding Rear Seat, Power Windows

Make sure all items in the trunk, or items extending through the opening into the back seat, are tied down. Loose items can fly forward and cause injury if you have to brake hard. See Loading Cargo on page 90.

Never drive with the seat-back folded down and the trunk lid open. See Carbon Monoxide Hazard on page 25.

Power Windows On U.S. EX model Your car's windows are electrically powered. Turn the ignition switch to ON (II) to raise or lower a window.

Each door has a switch that controls its window. To open the window, push the switch down and hold it. Release the switch when you want the window to stop. Close the window by pushing the switch up and holding it.

DRIVER'S WINDOW SWITCH

MAIN SWITCH

The driver's armrest has a master power window control panel. To open the passenger's window, push down on the appropriate switch and hold it down until the window reaches the desired position. To close the window, push up on the window switch. Release the switch when the window gets to the position you want.

The master control panel also contains these extra features:

AUTO - To open the driver's window fully, push the window switch firmly down and release it. The window automatically goes all the way down. To stop the window from going all the way down, push the window switch up briefly.

To open the driver's window only partially, push the window switch down lightly and hold it. The window will stop as soon as you release the switch.

The AUTO function only works to lower the driver's window. To raise the window, you must push the window switch up and hold it until the window reaches the desired position.

Instruments and Controls

Main MenuTable of ContentsstMoonroof

Power Windows, Moonroof

The MAIN switch controls power to the passenger's windows. With this switch off, the passenger's window cannot be raised or lowered. The MAIN switch does not affect the driver's window. Keep the MAIN switch off when you have children in the car so they do not injure themselves by operating the window unintentionally.

Closing a power window on a child's hands or fingers can cause serious injury.

Make sure children are away from the windows before closing them.

Instruments and Controls

Only on EX in the U.S. and Si model in Canada Use the switches on the dash- board under the left vent to operate the moonroof. The ignition must be ON (II).

To lift the rear of the moonroof for ventilation, push the button. To slide the moonroof back, push the switch. Hold it until the moonroof reaches the

desired position, then release the switch.

To close the moonroof, press and hold the

switch.

Closing the moonroof on someone's hands or fingers can cause serious injury.

Make sure passengers are clear of the moonroof before closing it.

NOTICE If you try to open the moonroof in below-freezing temperatures, or when it is covered with snow or ice, you can damage the moonroof panel or motor.

Main MenuTable of ContentsstSunshade

Mirrors

Manual Door Mirrors

Sunshade, Mirrors

You can slide the sunshade to any position when the moonroof is closed. The sunshade slides open with the moonroof. You must close it manually.

Keep the inside and outside mirrors clean and adjusted for best visibility. Be sure to adjust the mirrors before you start driving.

Only on DX models The outside mirrors can be adjusted by moving the knob on the inside of the door.

TAB

The inside mirror has day and night positions. The night position reduces glare from headlights behind you. Flip the tab on the bottom edge of the mirror to select the day or night position.

Instruments and Controls

Main MenuTable of ContentsstPower Mirrors

Adjusting the Power Mirrors

SELECTOR SWITCH

On the EX in the U.S. and Si in Canada Adjust the outside mirrors with the adjustment switch on the left side of the dashboard:

1. Turn the ignition switch ON (II).

2. Move the selector switch to L

(driver's side) or R (passenger's side).

3. Push the appropriate edge of

the adjustment switch to move the mirror right, left, up, or down.

4. When you finish, move the

selector switch to the center (OFF) position. This turns off the adjustment switch so you can't move a mirror out of position by accidentally bumping it.

Instruments and Controls

The outside mirror on the passenger's side has curved glass. Objects look farther away than they are. Use this mirror to get a "wide view." Don't use it to judge the distance of things behind you.

Main MenuTable of ContentsstParking Brake

Glove Box

GLOVE BOX

Open the glove box by pulling the handle. Close it with a firm push.

To apply the parking brake, pull the lever up fully. To release it, pull up slightly, push the button, and lower the lever. The parking brake light on the instrument panel should go out when the parking brake is fully released (see page 31).

NOTICE Driving the car with the parking brake applied can damage the rear brakes and axles.

Parking Brake, Glove Box

An open glove box can cause serious injury to your passenger in a crash, even if the passenger is wearing the seat belt.

Always keep the glove box closed while driving.

Instruments and Controls

Main MenuTable of ContentsstDigital Clock

Digital Clock

RESET

EX models in the U.S. and Si models in Canada The digital clock displays the time with the ignition switch ON (II). To see the time with the ignition off, press and hold the wide button under the clock.

To set the clock: 1. Turn the ignition switch

ON (II) to display the time.

2. Swing down the front cover of

the wide button under the clock display. You will see H, M, and RESET buttons.

Instruments and Controls

3. Press and hold the HOUR

button until the hour advances to the desired time.

4. Press and hold the MIN. button until the numbers advance to the desired time.

You can use the RESET button to quickly set the time to the nearest hour. If the displayed time is before the half hour, pressing RESET sets the clock back to the previous hour. If the displayed time is after the half hour, pressing RESET sets the clock forward to the beginning of the next hour.

For example:

1:06 would RESET backward to 1:00. 1:52 would RESET forward to 2:00.

Main MenuTable of ContentsstBeverage Holder

Beverage Holder, Vanity Mirror

Vanity Mirror

To open the beverage holder, push on the top. The beverage holder lid is spring-loaded and will pop open. To close it, push it down until it latches.

Use the beverage holder only when the car is parked. If you place cups in the holder while driving, the liquid may spill when you go over bumps or around corners.

Only on EX in the U.S. and Si model in Canada To use the vanity mirror, pull down the sun visor and swing down the cover.

Be careful when you are using the beverage holder. Spilled liquids can damage the upholstery, carpeting, and electrical components in the interior. If the liquid is very hot, it can scald you or your passengers.

Instruments and Controls

Main MenuTable of ContentsstCigarette Lighter, Ashtrays

Cigarette Lighter

Ashtrays

The ignition switch must be in ACCESSORY (I) or ON (II) for the cigarette lighter to work. To heat up the lighter, push it in. It will pop out when it is ready for use. Do not hold the lighter in while it is heating up, you could cause it to overheat.

Open the front ashtray by pulling on the bottom edge. Push it in to close it.

To remove the ashtray for empty- ing, push down on the metal plate inside, then pull the ashtray out completely.

The rear ashtray is at the rear end of the center console. Open the ashtray by swinging the upper edge of the lid down. To remove the ashtray for emptying, open it then lift up and out.

NOTICE Use the ashtray only for ciga- rettes, cigars and other smoking materials. To prevent a possible fire and damage to your car, don't put paper or other things that can burn in the ashtrays.

Instruments and Controls

Main MenuTable of ContentsstInterior Light

DOOR ACTIVATED

The interior light has a three- position switch. In the OFF (forward) position, the light does not come on. In the center position, the interior light comes on when you open either front door. In the ON (rearward) position, the interior light stays on continuously.

Interior Light

Instruments and Controls

Main MenuTable of ContentsstComfort and Convenience Features

The heating/ventilation system in your car, when combined with the optional air conditioner, provides a comfortable driving environment in all weather conditions.

U.S. EX and Canada Si models The standard audio system is very versatile. To get the most benefit from this system, read its description in this manual.

The anti-theft feature on your radio disables the system. To get the system working again you must enter a code number as described in this manual.

For other models Refer to the operating instructions that came with the optional audio system you selected.

Heating and Cooling . . . . . . . . .. 62
What Each Control Does . .. 64
How to Use the System . . . .. 65

Controlling Air

Flow Direction . . . . . . .. 65
Ventilation . . . . . . . . . . .. 65
To Cool with A/C . . . . . .. 66
To Heat . . . . . . . . . . . . . .. 67
To Heat and Dehumidify with Air Conditioning . 67
To Defog and Defrost . .. 68
To Turn Everything Off . 68
Audio System . . . . . . . . . . . . . . .. 69
Operating the Radio . . . . . .. 69
Presetting . . . . . . . . . . . . . . .. 70
Adjusting the Sound . . . . . .. 71
Radio Frequencies . . . . . . . .. 72
Operating the

Cassette Player . . . . . . . . .. 73
Cassette Player Care . . . . . .. 75
Operating the

CD Player/Changer . . . . .. 76

Comfort and Convenience Features

Main MenustHeating and Cooling

This system has full heating, ventilation, and air conditioning (optional) capabilities. You can adjust the system controls to mix these in various combinations. The air flows into the interior at three possible levels that you can select.

A Genuine Honda air conditioning system is available from your dealer. It meets Honda's high quality standards and is designed to fit your car. If you purchased your car without air conditioning, it can be installed at a later time. Please contact your dealer for more information.

CENTER VENT

SIDE VENT

The direction of air flow from the vents in the center and each side of the dashboard is adjustable. Move the tab in the center of each vent up and down and side to side.

The side and upper vents can be opened and closed with the dials next to them.

The heating and cooling system draws air through the exterior vents at the bottom of the wind- shield. Keep these vents clear of leaves and other debris.

Comfort and Convenience Features

Main MenuTable of ContentsstHeating and Cooling

UPPER VENT

OPEN CLOSE

Comfort and Convenience Features

Main MenuTable of ContentsstHeating and Cooling

What Each Control Does

Fan Control Lever Sliding this lever to the right increases the fan speed, which increases air flow.

Temperature Control Lever Sliding this lever to the right increases the temperature of air flowing through the system.

Mode Buttons These buttons control the direction of air flow. The indicator light shows which button is controlling air flow.

Air Conditioning (A/C) Switch This switch turns the air conditioner ON and OFF. The indicator in the switch lights when the A/C is ON.

MODE BUTTONS

RECIRCULATED AIR AIR CONDITIONING

ON/OFF SWITCH

FRESH AIR

TEMPERATURE CONTROL LEVER

FAN CONTROL LEVER

Fresh Air and Recirculation Buttons These two buttons control the source of air going into the system. In Fresh Air mode, air comes from outside the car. In Recirculation mode, the interior air recycles through the system.

Comfort and Convenience Features

Main MenuTable of ContentsstHeating and Cooling

Ventilation Your car has a flow-through ventilation system. Air enters the car through vents in front of the windshield. It circulates through the interior then exits through vents near the rear window. This system provides fresh air even when the car is standing still. To bring in outside air, press the button. Set the fan at a

comfortable speed.

How to Use the System This section covers the best way to use the system for ventilation, cooling, dehumidifying, defrosting and heating. In most cases, the mode and air source selections are only recommendations. You may prefer different settings.

Use mode to heat or cool the interior more quickly, or to keep out smoke and dust. Leaving the system in recirculation mode with the air conditioning off can cause the windows to fog up. Switch to the interior reaches a comfortable temperature or the outside smoky, dusty condition clears.

mode as soon as

The engine must be running for the heater and air conditioning system to provide hot and cold air. The heater uses engine coolant to warm the air. If the engine is cold, it will be several minutes before you feel warm air circulating.

Air conditioning does not depend on engine temperature. It can produce cold air almost immediately.

Controlling Air Flow Direction Air flows into the interior at three levels: Toward the floor through the dash vents toward the windshield and side windows You select the air flow level or combination of levels with the five mode buttons.

and

Comfort and Convenience Features

continued

Main MenuTable of ContentsstHeating and Cooling

To Cool with A/C To operate the air conditioning system, press the air conditioning switch. Set the fan to the desired speed. You can also use the mode button to direct air out of the dash and heater vents.

To cool the interior down rapidly after the car has been sitting in the sun:

1. Start the engine.

2. Turn on the A/C by pressing

the switch.

3. Set the fan to maximum

speed.

4. Open the windows partially.

Select

and

MODE BUTTONS

AIR CONDITIONING ON/OFF SWITCH

TEMPERATURE CONTROL LEVER

FAN CONTROL LEVER

When the interior reaches a comfortable temperature, close the windows and set the system for cooling as described above.

The air conditioning places an extra load on the engine. Watch the coolant temperature gauge (see page 35) when using the A/C in heavy traffic or driving up long hills. If it moves near the red zone, turn off the air conditioning until the gauge reads normally.

Comfort and Convenience Features

Main MenuTable of ContentsstTo Heat

To warm the interior.

1. Start the engine.

2. Select 3. Switch the fan to the desired

and

speed.

4. Adjust the warmth of the air with the temperature control lever.

To Heat and Dehumidify with Air Conditioning Air conditioning removes moisture from the air as it operates. When used in combination with the heater, it makes the interior warm and dry.

1. Switch the fan on. 2. Turn on the air conditioning.

3. Select

and press any

desired mode button.

Heating and Cooling

MODE BUTTONS

AIR CONDITIONING ON/OFF SWITCH

TEMPERATURE CONTROL LEVER

FAN CONTROL LEVER

4. Adjust the temperature control lever so the mixture of heated and cooled air feels comfortable.

This setting is suitable for all driving conditions whenever the outside temperature is above 32°F (0°C).

Comfort and Convenience Features

Main MenuTable of ContentsstTo Turn Everything Off To shut off the system temporarily, slide the fan speed and temperature control levers all the way to the left.

You should only shut the system completely off for the first few minutes of driving in cold weather, until the engine coolant warms up enough to operate the heater. Keep the fan on at all other times so stale air does not build up in the interior.

Heating and Cooling

To Defog and Defrost To remove fog from the inside of the windows: 1. Switch the fan on.

2. Turn on the air conditioning.

3. Select

and

4. Adjust the temperature control

lever so the airflow from the defroster vents feels warm.

5. Turn on the rear window

defogger to help clear the rear window.

To remove exterior frost or ice from the windshield and side windows after the car has been sitting out in cold weather: 1. Start the engine.

2. Select

and

3. Switch the fan and temperature

controls to maximum.

To rapidly remove exterior frost or ice from the windshield (on very cold days), first select

Once the windshield is

clear, select fogging the windows.

to avoid

These settings direct all the air flow to the defroster vents at the base of the windshield and each front door window. The air flow will get warmer and clear the windows faster as the engine warms up. You can close the side vents with the dial beside each vent. This will send more warm air to the windshield defroster vents.

For safety, make sure you have clear view through all the windows before driving away.

Comfort and Convenience Features

Main MenuTable of ContentsstAM/FM/Cassette Stereo Audio System U.S. EX and Canada Si Your Honda audio system is easy to use and will give clear AM/FM reception. The preset buttons allow you to select six stations on AM and 12 stations on FM.

The anti-theft feature disables the system if it is disconnected from the car's battery. To get the system working again, you must enter a code number. See page 79.

The cassette system uses Dolby B* noise reduction to give excellent sound reproduction. The system also senses when a metal or a chromium dioxide (CrO adjusts accordingly.

) tape is being played and

Audio System

ON/OFF/VOL KNOB

AM BUTTON

STEREO INDICATOR

TUNE/SEEK BAR

PRESET BUTTONS

FM BUTTON

*Dolby noise reduction manufac- tured under license from Dolby Laboratories Licensing Corpora- tion. "Dolby" and the symbol are trademarks of Dolby Labora- tories Licensing Corporation.

Operating the Radio The ignition switch must be in ACCESSORY (I) or ON (II) to operate the audio system. Turn the system on by turning the ON/OFF/VOL knob clockwise. The radio comes on and displays the frequency of the station it was last tuned to.

Adjust the volume by turning the ON/OFF/VOL knob.

Comfort and Convenience Features

Main MenuTable of ContentsstAudio System

Select the band you want to listen to by pressing the AM or FM1/ FM2 button. You will see the selected band and the frequency in the display.

ST will be displayed next to the frequency if the station is broadcasting in FM stereo. The AM stereo feature is not available.

You can use any of three methods to find radio stations on the selected band: TUNE, SEEK, or the Preset buttons.

The TUNE function lets you find a desired frequency. Push the right side ( ) of the TUNE/SEEK bar to change to a higher frequency, and the left side ( ) of the bar to change to a lower frequency.

To change the frequency up or down a single increment, push and release the TUNE/SEEK bar.

ON/OFF/VOL KNOB

AM BUTTON

STEREO INDICATOR

TUNE/SEEK BAR

PRESET BUTTONS

FM1 / FM2

The SEEK function searches the band for a station with a strong signal. Depending on which way you push the TUNE/SEEK bar, the system searches up or down from the current frequency. Push the bar until you hear a beep, then release it. The system searches until it finds a station with a strong signal, then stops.

Presetting The preset buttons allow you to store radio frequencies for later selection. Each button will store one frequency on the AM band, and two on the FM band. To store a frequency:

1. Select the desired band, AM

or FM. FM1 and FM2 allow you to store two frequencies with each Preset button.

Comfort and Convenience Features

Main MenuTable of Contentsst2. Use the TUNE or SEEK

function to tune the radio to a desired station.

3. Pick the Preset button you want for that station. Press the button and hold it until you hear a beep. The light in the indicator will come on and the station selected will show in the display.

4. Repeat steps 1 to 3 to store a total of six stations on AM and 12 on FM.

Once that station's frequency is stored, simply press and release the proper Preset button to tune to it. If you want to change any Preset button's selection, store another frequency as described. The frequencies you preset will be lost if your car's battery goes dead or is disconnected.

Audio System

ON/OFF/VOL KNOB

AM BUTTON

STEREO INDICATOR

TUNE/SEEK BAR

PRESET BUTTONS

FM1/ FM2

BASS/ TREBLE

BALANCER/ FADER

Adjust the side-to-side sound balance with the knob. Push the knob back in when you are done.

Adjusting the Sound Use the Balance and Fader controls to adjust the sound "direction." The Balance control moves sound left to right. The Fader control moves it front to back.

To use either control, push on the knob to get it to pop out. Adjust the front-to-back sound to your liking with the outside ring.

Comfort and Convenience Features

Main MenuTable of ContentsstAudio System

The illumination for the radio controls comes on with the instrument panel lights, even if the radio is off. You can use the Balance control to turn off the radio panel illumination even with the radio on. Push the control knob so it pops out, then pull it out slightly further. Check this control if the control panel lights do not come on with the instrument panel lights.

Use the Bass and Treble controls to adjust the tone quality to your liking. Push on the knob to get the controls to pop out. Adjust the bass level with the outer ring and the treble level with the knob. When finished, push the knobs back in so there is less chance of accidentally changing your settings.

ON/OFF/VOL KNOB

AM BUTTON

STEREO INDICATOR

TUNE/SEEK BAR

PRESET BUTTONS

FM1/ FM2

BASS/ TREBLE

BALANCER/ FADER

Radio Frequencies Your Honda's radio can tune in all frequencies in both the AM and FM bands. Those bands cover these frequencies:

AM band 530 to l710 kilohertz FM band 87.7 to 107.9 megahertz

Radio stations on the AM band are assigned frequencies at least 10 kilohertz apart (530, 540, 550). Those on the FM band are assigned frequencies at least 0.2
megahertz apart (87.9, 88.1, 88.3).

Comfort and Convenience Features

Main MenuTable of ContentsstStations must use these exact frequencies. It is fairly common for stations to round-off the frequency in their advertising, so your radio will show a frequency of 100.9 even though the announcer may call the station