You may also be interested in...
Download PDF Manual

Before installing any accessory:


Improper accessories or modifications can affect your vehicle’s handling, stability, and performance, and cause a crash in which you can be hurt or killed.


Follow all instructions in this owner’s manual regarding accessories and modifications.


When properly installed, cellular phones, alarms, two-way radios, and low-powered audio systems should not interfere with your vehicle’s computer controlled systems, such as your airbags, anti-lock brakes, and tire pressure monitoring system.


408


) or interfere with


Make sure the accessory does not obscure any lights, or interfere with proper vehicle operation or performance. Be sure electronic accessories do not overload electrical circuits (see page the proper operation of your vehicle. Before installing any electronic accessory, have the installer contact your dealer for assistance. If possible, have your dealer inspect the final installation. Do not install accessories on the side pillars or across the rear windows. Accessories installed in these areas may interfere with proper operation of the side curtain airbags.


307


2011 Accord Sedan 10/06/18 16:22:31 31TA5630_313


Accessories and Modifications


Modifying Your Vehicle Removing parts from your vehicle, or replacing components, with non-Honda components could seriously affect your vehicle’s handling, stability, and reliability.


Here are some examples:


Lowering the vehicle with a non- Honda suspension kit that significantly reduces ground clearance can allow the undercarriage to hit speed bumps or other raised objects, which could cause the airbags to deploy. Raising your vehicle with a non-Honda suspension kit can affect the handling, stability, and reliability.


Non-Honda wheels, because they are a universal design, can cause excessive stress on suspension components, and are not compatible with the tire pressure monitoring system (TPMS). Larger or smaller wheels and tires can interfere with the operation of your vehicle’s anti-lock brakes and other systems. Modifying your steering wheel or any other part of your vehicle’s safety features can make the systems ineffective.


If you plan to modify your vehicle, consult your dealer.


308


2011 Accord Sedan 10/06/18 16:22:39 31TA5630_314


Carrying Cargo


CONSOLE COMPARTMENT


Your vehicle has several convenient storage areas:


DOOR POCKETS


CENTER POCKETS


GLOVE BOX


TRUNK


SEAT-BACK POCKETS


Glove box Door and seat-back pockets Center pockets Console compartment Trunk, including the rear seat when folded down Roof-rack (if installed)


However, carrying too much cargo, or improperly storing it, can affect your vehicle’s handling, stability, stopping distance, and tires, and make it unsafe. Before carrying any type of cargo, be sure to read the following pages.


309


2011 Accord Sedan 10/06/18 16:22:50 31TA5630_315


Carrying Cargo


Load Limits The maximum load for your vehicle is 850 lbs (385 kg).


See Tire And Loading Information label attached to the driver’s doorjamb.


Label Example


This figure includes the total weight of all occupants, cargo, and accessories, and the tongue load if you are towing a trailer.


310


Overloading or improper loading can affect handling and stability and cause a crash in which you can be hurt or killed.


Follow all load limits and other loading guidelines in this manual.



Steps for Determining Correct Load Limit (1)


Locate the statement ‘‘The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.’’ on your vehicle’s placard.


(2)


Determine the combined weight of the driver and passengers that will be riding in your vehicle.


(3)


Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs.


(4)


The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the ‘‘XXX’’ amount equals 1,400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1,400


150) = 650 lbs.)


750 (5



×


(5)


Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.


(6)


If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.


2011 Accord Sedan 10/06/18 16:22:56 31TA5630_316


Example 1


Example 2


Example 3


Max Load 850 lbs (385 kg)


Passenger Weight 150 lbs x 2 = 300 lbs (68 kg x 2 = 136 kg)


Cargo Weight 550 lbs (249 kg)


Max Load 850 lbs (385 kg)


Passenger Weight 150 lbs x 4 = 600 lbs (68 kg x 4 = 272 kg)


Cargo Weight 250 lbs (113 kg)


Max Load 850 lbs (385 kg)


Passenger Weight 150 lbs x 5 = 750 lbs (68 kg x 5 = 340 kg)


Cargo Weight 100 lbs (45 kg)


Carrying Cargo


In addition, the total weight of the vehicle, all occupants, accessories, cargo, and trailer tongue load must not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR). Both are on a label on the driver’s doorjamb.


311


2011 Accord Sedan Keep the glove box closed while driving. If it is open, a passenger could injure their knees during a crash or sudden stop.


10/06/18 16:23:03 31TA5630_317


Carrying Cargo


Carrying Items in the Passenger Compartment


Store or secure all items that could be thrown around and hurt someone during a crash. Do not put any items on top of the trunk panel. They can block your view and be thrown around the vehicle during a crash. Be sure items placed on the floor behind the front seats cannot roll under the seats and interfere with the driver’s ability to operate the pedals, the operation of the seats, or the operation of the sensors under the seats. Keep all cargo below the bottom of the windows. If it is higher, it could interfere with the proper operation of the side curtain airbags.


312


Carrying Cargo in the Trunk


Distribute cargo evenly on the floor of the trunk, placing the heaviest items on the bottom and as far forward as possible. If you fold down the back seat, tie down items that could be thrown about the vehicle during a crash or sudden stop. If you carry large items that prevent you from closing the trunk lid, exhaust gas can enter the passenger area. To avoid the possibility of poisoning on page


, follow the instructions


carbon monoxide


.51


2011 Accord Sedan 10/06/18 16:23:08 31TA5630_318


Cargo Net Optional The cargo net can be used to help hold down items stored in the trunk.


Carrying Cargo


313


2011 Accord Sedan 10/06/18 16:23:10 31TA5630_319


314


2011 Accord Sedan 10/06/18 16:23:13 31TA5630_320


Driving


This section gives you tips on starting the engine under various conditions, and how to operate the manual and automatic transmissions. It also includes important information on parking your vehicle, the braking system, the vehicle stability assist (VSA ) system, the tire pressure monitoring system (TPMS), and facts you need if you are planning to tow a trailer.


Preparing to Drive ........................ Starting the Engine ....................... Manual Transmission ................... Automatic Transmission .............. Parking ........................................... Braking System ............................. Anti-lock Brakes (ABS) ............... Vehicle Stability Assist (VSA ),


. 316
. 317
. 318
. 320
. 325
. 326
. 327


aka Electronic Stability Control .......................


(ESC), System


. 329


Tire Pressure Monitoring


System (TPMS)


Towing a Trailer


........................ ...........................


. 331
. 334


315


2011 Accord Sedan 11.


When you start the engine, check the gauges and indicators in the instrument panel (see page ).


55


10/06/18 16:23:24 31TA5630_321


Preparing to Drive


You should do the following checks and adjustments before you drive your vehicle.


1.


Make sure all windows, mirrors, and outside lights are clean and unobstructed. Remove frost, snow, or ice.


2.


Check that the hood is fully closed.


3.


Check that the trunk is fully closed.


4.


5.


Visually check the tires. If a tire looks low, use a gauge to check its pressure.


Check that any items you may be carrying are stored properly or fastened down securely.


316


6.


7.


Onmodelswithpoweradjustable seats Check the seat adjustment (see page


92


).


Onmodelswithmanualadjustable seats Check the seat adjustment (see page


93


).


Check the adjustment of the inside and outside mirrors (see pages


and


104


105


).


8.


Check the steering wheel 75
adjustment (see page


).


9.


Make sure the doors are securely closed and locked.


10.


Fasten your seat belt. Check that your passengers have fastened their seat belts (see page ).


14


2011 Accord Sedan 10/06/18 16:23:31 31TA5630_322


1.


Apply the parking brake.


4.


2.


3.


In cold weather, turn off all electrical accessories to reduce the drain on the battery.


Manualtransmission: Press the clutch pedal down all the way. The START (III) position does not function unless the clutch pedal is pressed.


Automatictransmission: Make sure the shift lever is in Park. Press on the brake pedal.


Starting the Engine


Without touching the accelerator pedal, turn the ignition key to the START (III) position. Do not hold the key in the START (III) position for more than 15 seconds at a time. If the engine does not start right away, pause for at least 10 seconds before trying again.


The engine is harder to start in cold weather. Also, the thinner air f ound at altitudes above 8,000 f eet (2,400
meters) adds to this problem.


The immobilizer system protects your vehicle f rom thef t. If an improperly coded key (or other device) is used, the engine’s f uel system is disabled. For more inf ormation, see page


77


317


2011 Accord Sedan 10/06/18 16:23:37 31TA5630_323


Manual Transmission


The manual transmission is synchronized in all forward gears for smooth operation. It has a lockout so you cannot shift directly from fifth to reverse.


318


When shifting up or down, make sure you push the clutch pedal down all the way, shift to the next gear, and let the pedal up gradually. When you are not shifting, do not rest your foot on the clutch pedal. This can cause your clutch to wear out faster.


Come to a full stop before you shift into reverse. You can damage the transmission by trying to shift into reverse with the vehicle moving. Push down the clutch pedal, and pause for a few seconds before shifting into reverse, or shift into one of the forward gears for a moment. This stops the gears so they won’t ‘‘grind.’’


When slowing down, you can get extra braking from the engine by shifting to a lower gear. This extra braking can help you maintain a safe speed and prevent your brakes from overheating while going down a steep hill. Before downshifting, make sure the engine speed will not go into the tachometer’s red zone in the lower gear.


Rapid slowing or speeding up can cause loss of control on slippery surfaces. If you crash, you can be injured.


Use extra care when driving on slippery surfaces.


2011 Accord Sedan 10/06/18 16:23:42 31TA5630_324


Manual Transmission


Recommended Shift Points Drive in the highest gear that lets the engine run and accelerate smoothly. This will give you good fuel economy and effective emissions control. The following shift points are recommended:


Shift up


Normal acceleration


1st to 2nd 2nd to 3rd 3rd to 4th 4th to 5th


15 mph (24 km/h) 28 mph (45 km/h) 41 mph (66 km/h) 52 mph (84 km/h)


Engine Speed Limiter If you exceed the maximum speed for the gear you are in, the engine speed will enter into the tachometer’s red zone. If this occurs, you may feel the engine cut in and out. This is caused by a limiter in the engine’s computer controls. The engine will run normally when you reduce the rpm below the red zone.


Before downshifting, make sure the engine will not go into the tachometer’s red zone.


319


2011 Accord Sedan 10/06/18 16:23:48 31TA5630_325


Automatic Transmission


Shift Lever Position Indicators


These indicators between the tachometer and speedometer show which position the shift lever is in.


320


The ‘‘D’’ indicator comes on for a few seconds when you turn the ignition switch to the ON (II) position. If it flashes while driving (in any shift position), it indicates a possible problem in the transmission.


If the malfunction indicator lamp comes on along with the ‘‘D’’ indicator, there is a problem with the automatic transmission control system. Avoid rapid acceleration, and have the transmission checked by your dealer as soon as possible.


Shifting


SHIFT LEVER


RELEASE BUTTON


To shift from Park to any position, press firmly on the brake pedal, and press the release button on the front of the shift lever, then move the lever. You cannot shift out of Park when the ignition switch is in the LOCK (0) or ACCESSORY (I) position.


2011 Accord Sedan 10/06/18 16:23:54 31TA5630_326


To shift from:


Do this:


Press the brake pedal and press the shift lever release button.


Press the shift lever release button.


Move the shift lever.


P to R


R to P N to R D to D3
D3 to 2
2 to 1
1 to 2
2 to D3
D3 to D D to N N to D R to N



This position mechani-


Park (P) cally locks the transmission. Use Park whenever you are turning off or starting the engine. To shift out of Park, you must press on the brake pedal and have your foot off the accelerator pedal. Press the release button on the front of the shift lever to move it.


If you have done all of the above and still cannot move the lever out of Park, see on page 323


Shift Lock Release


You must also press the release button to shift into Park. To avoid transmission damage, come to a complete stop before shifting into Park. The shift lever must be in Park before you can remove the key from the ignition switch.


Automatic Transmission



Press the brake


Reverse (R) pedal and the release button on the front of the shift lever to shift from Park to reverse. To shift from reverse to neutral, come to a complete stop, and then shift. Press the release button before shifting into reverse from neutral.



Use neutral if you


Neutral (N) need to restart a stalled engine, or if it is necessary to stop briefly with the engine idling. Shift to the Park position if you need to leave your vehicle for any reason. Press on the brake pedal when you are moving the shift lever from neutral to another gear.


CONTINUED


321


2011 Accord Sedan 10/06/18 16:24:01 31TA5630_327


Automatic Transmission



Use this position for


Drive (D) your normal driving. The transmission automatically selects a suitable gear (1 through 5) for your speed and acceleration. You may notice the transmission shifting up at higher engine speeds when the engine is cold. This helps the engine warm up faster.



To shift from D to D3,


Drive (D3) press the shift lever release button. This position is similar to D, except only the first three gears are selected. Use D3 when towing a trailer in hilly terrain, or to provide engine braking when going down a steep hill. D3 can also keep the transmission from cycling between third and fourth gears in stop-and-go driving.


322



First (1) To shift from second to first, press the release button on the front of the shift lever. This position locks the transmission in first gear. By upshifting and downshifting through 1, 2, D3, and D, you can operate this transmission much like a manual transmission without a clutch pedal.



To shift to second,


Second (2) press the release button on the front of the shift lever. This position locks the transmission in second gear. It does not downshift to first gear when you come to a stop.


Use second gear:


For more power when climbing. To increase engine braking when going down steep hills. For starting out on a slippery surface or in deep snow. To help reduce wheel spin. When driving downhill with a trailer.


2011 Accord Sedan 10/06/18 16:24:10 31TA5630_328


Engine Speed Limiter If you exceed the maximum speed for the gear you are in, the engine speed will enter into the tachometer’s red zone. If this occurs, you may feel the engine cut in and out. This is caused by a limiter in the engine’s computer controls. The engine will run normally when you reduce the rpm below the red zone.


Shift Lock Release This allows you to move the shift lever out of Park if the normal method of pushing on the brake pedal and pressing the release button does not work.


1.


Set the parking brake.


2.


Remove the key from the ignition switch.


Automatic Transmission


COVER


3.


Put a cloth on the edge of the shift lock release slot cover to prevent scratches. Use a small flat-tip screwdriver or metal fingernail file to carefully pry up the edge of the cover and remove it from the slot.


4.


Insert the key in the shift lock release slot.


CONTINUED


323


2011 Accord Sedan 6.


Remove the key from the shift lock release slot, then reinstall the cover. Make sure the notch on the cover is on the right side. Insert the key into the ignition switch, press the brake pedal, and restart the engine.


If you need to use the shift lock release, it means your vehicle is developing a problem. Have it checked by your dealer.


10/06/18 16:24:14 31TA5630_329


Automatic Transmission


RELEASE BUTTON


SHIFT LOCK RELEASE SLOT


5.


Push down on the key while you press the release button on the front of the shift lever and move the shift lever out of Park to neutral.


324


2011 Accord Sedan 10/06/18 16:24:22 31TA5630_330


Always use the parking brake when you park your vehicle. Make sure the parking brake is set firmly, or your vehicle may roll if it is parked on an incline.


If your vehicle has an automatic transmission, set the parking brake before you put the transmission in Park. This keeps the vehicle from moving and putting pressure on the parking mechanism in the transmission.


Parking Tips


Make sure the moonroof (if equipped) and the windows are closed. Turn off the lights. Place any packages, valuables, etc., in the trunk or take them with you.


Lock the doors. ExceptLX Check the indicator on the instrument panel to verify that the security system is set.


Never park over dry leaves, tall grass, or other flammable materials. The hot three way catalytic converter could cause these materials to catch on fire.


Parking


If the vehicle is facing uphill, turn the front wheels away from the curb. If your vehicle has a manual transmission, put it in first gear. If the vehicle is facing downhill, turn the front wheels toward the curb. If your vehicle has a manual transmission, put it in reverse gear. Make sure the parking brake is fully released before driving away. Driving with the parking brake partially set can overheat or damage the rear brakes.


325


2011 Accord Sedan 10/06/18 16:24:30 31TA5630_331


Braking System


Your vehicle is equipped with disc brakes at all four wheels. A power assist helps reduce the effort needed on the brake pedal. The emergency brake assist system increases the stopping force when you depress the brake pedal hard in an emergency situation. The anti-lock brake system (ABS) helps you retain steering control when braking very hard.


Resting your foot on the pedal keeps the brakes applied lightly, builds up heat, reduces their effectiveness and reduces brake pad life. In addition, fuel economy can be reduced. It also keeps your brake lights on all the time, confusing drivers behind you.


326


Constant application of the brakes when going down a long hill builds up heat and reduces their effective- ness. Use the engine to assist the brakes by taking your foot off the accelerator and downshifting to a lower gear.


Check the brakes after driving through deep water. Apply the brakes moderately to see if they feel normal. If not, apply them gently and frequently until they do. Be extra cautious in your driving.


Braking System Design The hydraulic system that operates the brakes has two separate circuits. Each circuit works diagonally across the vehicle (the left-front brake is connected with the right-rear brake, etc.). If one circuit should develop a problem, you will still have braking at two wheels.


Brake Pad Wear Indicators The front and rear disc brakes on all models have audible brake pad wear indicators.


If the brake pads need replacing, you will hear a distinctive, metallic screeching sound when you apply the brake pedal. If you do not have the brake pads replaced, they will screech all the time. It is normal for the brakes to occasionally squeal or squeak when you apply them.


2011 Accord Sedan 10/06/18 16:24:36 31TA5630_332


You will feel a pulsation in the brake pedal when the ABS activates, and you may hear some noise. This is normal: it is the ABS rapidly pumping the brakes. On dry pavement, you will need to press on the brake pedal very hard before the ABS activates. However, you may feel the ABS activate immediately if you are trying to stop on snow or ice.


The anti-lock brake system (ABS) helps prevent the wheels from locking up, and helps you retain steering control by pumping the brakes rapidly, much faster than a person can do it.


The electronic brake distribution (EBD) system, which is part of the ABS, also balances the front-to-rear braking distribution according to vehicle loading.


Youshouldneverpumpthebrakepedal. Let the ABS work for you by always keeping firm, steady pressure on the brake pedal. This is sometimes referred to as ‘‘stomp and steer.’’


Anti-lock Brakes (ABS)


ABS Indicator


If this indicator comes on, the anti- lock function of the braking system has shut down. The brakes still work like a conventional system, but without anti-lock. You should have your dealer inspect your vehicle as soon as possible.


If the ABS indicator comes on while driving, test the brakes as shown on page


407


CONTINUED


327


2011 Accord Sedan 10/06/18 16:24:42 31TA5630_333


Anti-lock Brakes (ABS)


If the ABS indicator and the brake system indicator come on together, and the parking brake is fully released, the EBD system may also be shut down.


ImportantSafetyReminders ABS does not reduce the time or distance it takes to stop the vehicle. It only helps with the steering control during braking.


A vehicle with ABS may require a longer distance to stop on loose or uneven surfaces, such as gravel or snow, than a vehicle without anti-lock.


407


. If the brakes feel normal,


Test your brakes as instructed on page drive slowly and have your vehicle repaired by your dealer as soon as possible. Avoid sudden hard braking which could cause the rear wheels to lock up and possibly lead to a loss of control.


ABS will not prevent a skid that results from changing direction abruptly, such as trying to take a corner too fast or making a sudden lane change. Always drive at a safe speed for the road and weather conditions.


ABS cannot prevent a loss of stability. Always steer moderately when you are braking hard. Severe or sharp steering wheel movement can still cause your vehicle to veer into oncoming traffic or off the road.


328


2011 Accord Sedan 10/06/18 16:24:51 31TA5630_334


Vehicle Stability Assist (VSA ), aka Electronic Stability Control (ESC), System


The vehicle stability assist (VSA) system helps to stabilize the vehicle during cornering if the vehicle turns more or less than desired. It also assists you in maintaining traction while accelerating on loose or slippery road surfaces. It does this by regulating the engine’s output and by selectively applying the brakes.


When VSA activates, you may notice that the engine does not respond to the accelerator in the same way it does at other times. There may also be some noise from the VSA hydraulic system. You will also see the VSA system indicator blink.


The VSA system cannot enhance the vehicle’s driving stability in all situations and does not control your vehicle’s entire braking system. It is still your responsibility to drive and corner at reasonable speeds and to leave a sufficient margin of safety.


VSA Off Indicator


When VSA is off, the VSA off indicator comes on as a reminder.


Vehicle Stability Assist (VSA) System Indicator


When VSA activates, you will see the VSA system indicator blink.


If this indicator comes on while driving, pull to the side of the road when it is safe, and turn off the engine. Reset the system by restarting the engine. If the VSA system indicator stays on or comes back on while driving, have the VSA system inspected by your dealer.


The main function of the


NOTE: VSA system is generally known as Electronic Stability Control (ESC). The system also includes a traction control function.


If the low tire pressure indicator or TPMS indicator comes on, the VSA system automatically turns on even if the VSA system is turned off by pressing the VSA OFF switch (see page cannot turn the VSA system off by pressing the VSA OFF switch again.


). If this happens, you


330


Without VSA, your vehicle will have normal braking and cornering ability, but it will not have VSA traction and stability enhancement.


329


2011 Accord Sedan 10/06/18 16:25:00 31TA5630_335


Vehicle Stability Assist (VSA ), aka Electronic Stability Control (ESC), System


VSA and Tire Sizes Driving with varying tire or wheel sizes may cause the VSA to malfunction. When replacing tires, make sure they are of the same size and type as your original tires (see page


385


).


If you install winter tires, make sure they are the same size as those that were originally supplied with your vehicle. Exercise the same caution during winter driving as you would if your vehicle was not equipped with VSA.


VSA is turned on every time you start the engine, even if you turned it off the last time you drove the vehicle.


In certain unusual conditions when your vehicle gets stuck in shallow mud or fresh snow, it may be easier to free it with the VSA temporarily switched off. When the VSA system is off, the traction control system is also off. You should only attempt to free your vehicle with the VSA off if you are not able to free it when the VSA is on.


Immediately after freeing your vehicle, be sure to switch the VSA on again. We do not recommend driving your vehicle with the VSA and traction control systems switched off.


VSA OFF Switch


VSA OFF SWITCH


This switch is under the driver’s side vent. To turn the VSA system on and off, press and hold it until you hear a beep.


When VSA is off, the VSA off indicator comes on as a reminder. Press and hold the switch again. It turns the system back on.


330


2011 Accord Sedan 10/06/18 16:25:08 31TA5630_336


Your vehicle is equipped with a tire pressure monitoring system (TPMS) that turns on every time you start the engine and monitors the pressure in your tires while driving.


Each tire has its own pressure sensor (not including the spare tire). If the air pressure of a tire becomes significantly low while driving, the sensor in that tire immediately sends a signal that causes the low tire pressure indicator to come on.


Tire Pressure Monitoring System (TPMS)


Low Tire Pressure Indicator


When the low tire pressure indicator is on, one or more of your tires is significantly underinflated. You should stop and check your tires as soon as possible, and inflate them to the proper pressure as indicated on the vehicle’s tire information placard.


If you think you can safely drive a short distance to a service station, proceed slowly, and inflate the tire to the recommended pressure shown on the driver’s doorjamb.


If the tire is flat, or if the tire pressure is too low to continue driving, replace the tire with the compact spare tire (see page 392


).


If you cannot make the low tire pressure indicator go out after inflating the tires to the specified values, have your dealer check the system as soon as possible.


Driving on a significantly under inflated tire causes the tire to overheat and can lead to tire failure. Underinflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability.


Because tire pressure varies by temperature and other conditions, the low tire pressure indicator may come on unexpectedly.


CONTINUED


331


2011 Accord Sedan When you restart the vehicle with the compact spare tire, the TPMS indicator may also come on and stay on after driving several miles (kilometers).


10/06/18 16:25:15 31TA5630_337


Tire Pressure Monitoring System (TPMS)


information label and in the owner’s manual (see page


381


).


Tire Pressure Monitoring System (TPMS) Indicator This indicator comes on and stays on if there is a problem with the tire pressure monitoring system.


If this happens, the system will shut off and no longer monitor tire pressures. Have the system checked by your dealer as soon as possible.


If the low tire pressure indicator or TPMS indicator comes on, the VSA system automatically turns on even if the VSA system is turned off by pressing the VSA OFF switch (see page cannot turn the VSA system off by pressing the VSA OFF switch again.


). If this happens, you


330


For example, if you check and fill your tires in a warm area, then drive in extremely cold weather, the tire pressure will be lower than measured and could be underinflated and cause the low tire pressure indicator to come on. Or, if you check and adjust your tire pressure in cooler conditions, and drive into extremely hot conditions, the tire may become overinflated. However, the low tire pressure indicator will not come on if the tires are overinflated.


Refer to page guidelines.


380


for tire inflation


Although your tire pressure is monitored, you must manually check the tire pressures monthly.


Each tire, including the spare, should be checked monthly when cold, and set to the recommended inflation pressure as specified on the tire


332


2011 Accord Sedan 10/06/18 16:25:23 31TA5630_338


Changing a Tire with TPMS If you have a flat tire, the low tire pressure indicator will come on. Replace the flat tire with the compact spare tire (see page


392


).


Each wheel (except the compact spare tire wheel) is equipped with a tire pressure sensor. You must use TPMS specific wheels. It is recommended that you always have your tires serviced by your dealer or qualified technician.


After you replace the flat tire with the compact spare tire, the low tire pressure indicator stays on. This is normal; the system is not monitoring the spare tire pressure. Manually check the spare tire pressure to be sure it is correct. After several miles (kilometers) driving with the compact spare tire, the TPMS indicator comes on and the low tire pressure indicator goes off.


Tire Pressure Monitoring System (TPMS)


The low tire pressure indicator or the TPMS indicator will go off, after several miles (kilometers) driving, when you replace the spare tire with the specified regular tire equipped with the tire pressure monitor sensor.


Never use a puncture-repairing agent in a flat tire. If used, you will have to replace the tire pressure sensor. Have the flat tire repaired by your dealer as soon as possible.


AsrequiredbytheFCC: ThisdevicecomplieswithPart15ofthe FCCrules.Operationissubjecttothe followingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and (2)thisdevicemustacceptany interferencereceived,including interferencethatmaycauseundesired operation.


Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.


ThisdevicecomplieswithIndustry CanadaStandardRSS-210. Operationissubjecttothefollowingtwo conditions:(1)thisdevicemaynotcause interference,and(2)thisdevicemust acceptanyinterferencethatmaycause undesiredoperationofthedevice.


333


2011 Accord Sedan 10/06/18 16:25:29 31TA5630_339


Towing a Trailer


Your vehicle has been designed primarily to carry passengers and their cargo. You can also use it to tow a trailer if you carefully observe the load limits, use the proper equipment, and follow the guidelines in this section.


Break-InPeriod Avoid towing a trailer during your vehicle’s first 600 miles (1,000 km) (see page


296


).


334


Load Limits


Exceeding any load limit or improperly loading your vehicle and trailer can cause a crash in which you can be seriously hurt or killed.


Check the loading of your vehicle and trailer carefully before starting to drive.


The


Total Trailer Weight: maximum allowable weight of the trailer and everything in or on it must not exceed 1,000 lbs (450 kg). Towing a load that is too heavy can seriously affect your vehicle’s handling and performance. It can also damage the engine and drivetrain.


2011 Accord Sedan 10/06/18 16:25:36 31TA5630_340


Towing a Trailer


To achieve a proper tongue load, start by loading 60% of the load toward the front of the trailer and 40% toward the rear, then re-adjust the load as needed.


Gross Vehicle Weight Rating (GVWR): The maximum allowable weight of the vehicle, all occupants, all accessories, all cargo, and the tongue load is:


Canadian models


SE:


1,970 kg


EXandEX-L:


2,030 kg V6models: 2,090 kg


Tongue Load: The weight that the tongue of a fully-loaded trailer puts on the hitch should be approximately 10% of the total trailer weight. Too much tongue load reduces front-tire traction and steering control. Too little tongue load can make the trailer unstable and cause it to sway.


U.S. models


LX,LX-PandSE:


4,299 lbs (1,950 kg)


EXandEX-L:


4,431 lbs (2,010 kg)


V6models:


4,575 lbs (2,075 kg)


CONTINUED


335


2011 Accord Sedan 10/06/18 16:25:45 31TA5630_341


Towing a Trailer


Gross Axle Weight Rating (GAWR): The maximum allowable weight at the vehicle axles is:


U.S. models


LX,LX-PandSE:


2,337 lbs (1,060 kg) on the front axle 2,017 lbs (915 kg) on the rear axle


EXandEX-L:


2,403 lbs (1,090 kg) on the front axle 2,061 lbs (935 kg) on the rear axle


V6models:


2,557 lbs (1,160 kg) on the front axle 2,061 lbs (935 kg) on the rear axle


336


Canadian models


SE:


1,065 kg on the front axle 920 kg on the rear axle


EXandEX-L:


1,095 kg on the front axle 950 kg on the rear axle


V6models: 1,175 kg on the front axle 950 kg on the rear axle


Checking Loads The best way to confirm that all loads are within limits is to check them at a public scale. For public scales in your area, check your local phone book, or contact your trailer dealer or rental agency for assistance.


If you cannot get to a public scale, you can estimate the total trailer weight by adding the weight of your trailer (as quoted by the manufacturer) with everything in or on the trailer.


If you normally pull the same load each time you tow a trailer, you can use a suitable scale or a special tongue load gauge to check the tongue load the first time you set up a towing combination (a fully loaded vehicle and trailer), then recheck the tongue load whenever the conditions change.


2011 Accord Sedan 10/06/18 16:25:54 31TA5630_342


Towing Equipment and Accessories Towing can require a variety of equipment, depending on the size of your trailer, how it will be used, how much load you are towing, and where you tow.


Discuss your needs with your trailer sales or rental agency, and follow the guidelines in this section. Also make sure that all equipment is properly installed and maintained, and that it meets federal, state, province, territory, and local regulations.


Hitches Any hitch used on your vehicle must be properly bolted to the underbody.


SafetyChains Always use safety chains when you tow a trailer. Make sure the chains are secured to the trailer and hitch, and that they cross under the tongue and can catch the trailer if it becomes unhitched. Leave enough slack to allow the trailer to turn corners easily, but do not let the chains drag on the ground.


Towing a Trailer


TrailerBrakes There are two common types of trailer brakes: surge and electric. Surge brakes are common for boat trailers, since the brakes will get wet.


If you choose electric brakes, be sure they are electronically actuated. Do not attempt to tap into your vehicle’s hydraulic system. No matter how successful it may seem, any attempt to attach trailer brakes to your vehicle’s hydraulic system will lower braking effectiveness and create a potential hazard.


See your trailer dealer or rental agency for more information on installing electric brakes.


CONTINUED


337


2011 Accord Sedan 10/06/18 16:26:03 31TA5630_343


Towing a Trailer


TrailerLights Trailer lights and equipment must comply with federal, state, province, territory, and local regulations. Check with your local trailer sales or rental agencies for the requirements in the area where you plan to tow, and use only equipment designed for your vehicle.


Since lighting and wiring vary by trailer type and brand, you should have a qualified technician install a suitable connector between the vehicle and the trailer. Improper equipment or installation can cause damage to your vehicle’s electrical system and affect your vehicle warranty.


338


AdditionalTowingEquipment Many states and Canadian provinces/territories require special outside mirrors when towing a trailer. Even if they don’t, you should install special mirrors if you cannot clearly see behind you, or if the trailer creates a blind spot.


Ask your trailer sales or rental agency if any other items are recommended or required for your towing situation.


Pre-Tow Checklist When preparing to tow, and before driving away, be sure to check the following:


The vehicle has been properly serviced, and the suspension and the cooling system are in good operating condition. The trailer has been properly serviced and is in good condition. All weights and loads are within limits. The hitch, safety chains, and any other attachments are secure. All items in or on the trailer are properly secured and cannot shift while you drive.


2011 Accord Sedan 10/06/18 16:26:11 31TA5630_344


The lights and brakes on your vehicle and the trailer are working properly. Your vehicle tires and spare are properly inflated, and the trailer tires and spare are inflated as recommended by the trailer maker.


Driving Safely With a Trailer The added weight, length, and height of a trailer will affect your vehicle’s handling and performance, so driving with a trailer requires some special driving skills and techniques.


For your safety and the safety of others, take time to practice driving maneuvers before heading for the open road, and follow the guidelines in this section.


TowingSpeedsandGears Drive slower than normal in all driving situations, and obey posted speed limits for vehicles with trailers. If you have an automatic transmission, use the D position when towing a trailer on level roads. D3 is the proper shift lever position to use when towing a trailer in hilly terrain. (See ‘‘ DrivingonHills next column for additional gear information.)


’’ in the


Towing a Trailer


MakingTurnsandBraking Make turns more slowly and wider than normal. The trailer tracks a smaller arc than your vehicle, and it can hit or run over something the vehicle misses. Allow more time and distance for braking. Do not brake or turn suddenly as this could cause the trailer to jackknife or turn over.


DrivingonHills When climbing hills, closely watch your temperature gauge. If it nears the red (Hot) mark, turn the air conditioning off, reduce speed and, if necessary, pull to the side of the road to let the engine cool.


If the automatic transmission shifts frequently while going up a hill, shift to D3.


CONTINUED


339


2011 Accord Sedan Towing Your Vehicle Your vehicle is not designed to be towed behind a motor home. If your vehicle needs to be towed in an emergency, see page


415


10/06/18 16:26:19 31TA5630_345


Towing a Trailer


When driving down hills, reduce your speed, and shift down to second gear. Do not ‘‘ride’’ the brakes, and remember, it will take longer to slow down and stop when towing a trailer.


If you must stop when facing uphill, use the foot brake or parking brake. Do not try to hold the vehicle in place by pressing on the accelerator, as this can cause the automatic transmission to overheat.


HandlingCrosswindsandBuffeting Crosswinds and air turbulence caused by passing trucks can disrupt your steering and cause the trailer to sway. When being passed by a large vehicle, keep a constant speed, and steer straight ahead. Do not try to make quick steering or braking corrections.


340


BackingUp Always drive slowly and have someone guide you when backing up. Grip the of the steering wheel, then turn the wheel to the left to get the trailer to move to the left. Turn the wheel to the right to move the trailer to the right.


bottom


Parking Follow all normal precautions when parking, including firmly setting the parking brake and putting the transmission in Park (automatic) or in 1st or reverse (manual). Also, place wheel chocks at each of the trailer’s tires.


2011 Accord Sedan 10/06/18 16:26:24 31TA5630_346


This section explains why it is important to keep your vehicle well maintained and how to follow basic maintenance safety precautions.


This section also includes instructions on how to read the Maintenance Minder messages on the information display, and instructions for simple maintenance tasks you may want to take care of yourself.


If you have the skills and tools to perform more complex maintenance tasks on your vehicle, you may want to purchase the service manual. See page for information on how to obtain a copy, or see your dealer.


439


U.S. Vehicles: Maintenance, replacement, or repair of emissions control devices and systems may be done by any automotive repair establishment or individual using parts that are ‘‘certified’’ to EPA standards.


Maintenance


TM


Maintenance Safety Maintenance Minder Fluid Locations Adding Engine Oil Changing the Engine Oil and


...................... ................. .............................. ........................


Filter


Brake Fluid Clutch Fluid


Engine Coolant Windshield Washers Transmission Fluid


Automatic Transmission Manual Transmission Brake and Clutch Fluid


........................................... .............................. .................... ....................... .......... .............. ................ ................................ ............................... .................... .................................... ............................................. ................ ..................................... .................. ................................. ............................................... ................... ............................. ..................................


Power Steering Fluid Timing Belt Lights Cleaning the Seat Belts Floor Mats Dust and Pollen Filter Wiper Blades Tires Checking the Battery Vehicle Storage Interior Care


. 342
. 343
. 350
. 352


. 354
. 356
. 358
. 359
. 359
. 361
. 362
. 362
. 363
. 363
. 364
. 365
. 375
. 375
. 376
. 377
. 380
. 388
. 389
. 390


341


2011 Accord Sedan 10/06/18 16:26:34 31TA5630_347


Maintenance Safety


All service items not detailed in this section should be performed by a certified technician or other qualified mechanic.


Important Safety Precautions To eliminate potential hazards, read the instructions before you begin, and make sure you have the tools and skills required.


Make sure your vehicle is parked on level ground, the parking brake is set, and the engine is off. To clean parts, use a commercially available degreaser or parts cleaner, not gasoline. To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames away from the battery and all fuel-related parts. Wear eye protection and protective clothing when working with the battery or compressed air.


342


Improperly maintaining this vehicle, or failing to correct a problem before driving can cause a crash in which you can be seriously hurt or killed.


Always follow the inspection and maintenance recommendations and schedules in this owner’s manual.


Be sure


Potential Vehicle Hazards Carbon Monoxide poison from engine exhaust. there is adequate ventilation whenever you operate the engine. Burns from hot parts. Let the engine and exhaust system cool down before touching any parts.


Injury from moving parts. not run the engine unless instructed to do so.


Do


Failure to properly follow maintenance instructions and precautions can cause you to be seriously hurt or killed.


Always follow the procedures and precautions in this owner’s manual.


Some of the most important safety precautions are given here. However, we cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task.


2011 Accord Sedan 10/06/18 16:26:42 31TA5630_348


Your vehicle displays engine oil life and maintenance service items on the information display to show you when you should have your dealer do engine oil replacement and indicated maintenance service.


Based on the engine operating conditions, the onboard computer in your vehicle calculates the remaining engine oil life and displays it as a percentage.


Engine Oil Life Display


SELECT/RESET KNOB


Maintenance Minder


TM


The remaining engine oil life is shown on the display according to this table:


Calculated


Displayed


Engine Oil Life (%)


Engine Oil Life (%)


91 % 81 % 71 % 61 % 51 % 41 % 31 % 21 % 16 % 11 % 6 % 1 %


100 % 90 % 80 % 70 % 60 % 50 % 40 % 30 % 20 % 15 % 10 % 5 %


− − − − − − − − − − − − 0 %


ENGINE OIL LIFE INDICATOR


U.S. model is shown.


To see the current engine oil life, turn the ignition switch to the ON (II) position, then press and release the select/reset knob repeatedly until the engine oil life indicator appears (see page


64


).


100 % 90 % 80 % 70 % 60 % 50 % 40 % 30 % 20 % 15 % 10 % 5 % 0 %


CONTINUED


343


2011 Accord Sedan 10/06/18 16:26:49 31TA5630_349


Maintenance Minder


TM


MAINTENANCE MINDER INDICATOR


ENGINE OIL LIFE INDICATOR


MAINTENANCE ITEM CODE(S) U.S. model is shown.


If the remaining engine oil life is 15
to 6 percent, you will see the engine oil life indicator every time you turn the ignition switch to the ON (II) position. The Maintenance Minder indicator will also come on, and the

Loading...
x