Login- Download PDF Manual
-
(GMNA-Localizing-U.S/Canada-
Seats and Restraints
101
Warning (Continued)
restraint properly in the vehicle using the vehicle safety belt or LATCH system, following the instructions that came with that child restraint and the instructions in this manual.
To help reduce the chance of injury, the child restraint must be secured in the vehicle. Child restraint systems must be secured in vehicle seats by lap belts or the lap belt portion of a lap-shoulder belt, or by the LATCH system. See Lower Anchors and Tethers for Children (LATCH System) 0 103. Children can be endangered in a crash if the child restraint is not properly secured in the vehicle. When securing an add-on child restraint, refer to the instructions that come with the restraint which may be on the restraint itself or in a booklet, or both, and to this manual. The child restraint instructions are
Forward-Facing Child Seat
Booster Seats
A forward-facing child seat provides restraint for the child's body with the harness.
A booster seat is a child restraint designed to improve the fit of the vehicle's safety belt system. A booster seat can also help a child to see out the window. Securing an Add-On Child Restraint in the Vehicle { Warning
A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle. Secure the child
(Continued)
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
102
Seats and Restraints
important, so if they are not available, obtain a replacement copy from the manufacturer. Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle. Be sure to properly secure any child restraint in the vehicle — even when no child is in it. In some areas of the United States and Canada, Certified Child Passenger Safety Technicians (CPSTs) are available to inspect and demonstrate how to correctly use and install child restraints. In the U.S., refer to the National Highway Traffic Safety Administration (NHTSA) website to locate the nearest child safety seat inspection station. For CPST availability in Canada, check with Transport Canada or the Provincial Ministry of Transportation office.
Securing the Child Within the Child Restraint
{ Warning
A child can be seriously injured or killed in a crash if the child is not properly secured in the child restraint. Secure the child properly following the instructions that came with that child restraint.
Where to Put the Restraint According to accident statistics, children and infants are safer when properly restrained in a child restraint system or infant restraint system secured in a rear seating position. Whenever possible, children age 12 and under should be secured in a rear seating position. The vehicle may be equipped with a front center airbag in the inboard side of the driver seat. Even with a
front center airbag, a child restraint can be installed in any second row seating position. Never put a rear-facing child seat in the front. This is because the risk to the rear-facing child is so great if the airbag deploys.
{ Warning
A child in a rear-facing child restraint can be seriously injured or killed if the front passenger airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. A child in a forward-facing child restraint can be seriously injured or killed if the front passenger airbag inflates and the passenger seat is in a forward position. Even if the passenger sensing system has turned off the front passenger frontal airbag, no system is fail-safe. No one can guarantee that an airbag will not
(Continued)
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
Warning (Continued)
deploy under some unusual circumstance, even though it is turned off. Secure rear-facing child restraints in a rear seat, even if the airbag is off. If you secure a forward-facing child restraint in the front seat, always move the front passenger seat as far back as it will go. It is better to secure the child restraint in a rear seat. See Passenger Sensing System 0 90 for additional information.
{ Warning
A child in a child restraint in the center front seat can be badly injured or killed by the frontal airbags if they inflate. Never secure a child restraint in the center front seat. It is always better to secure a child restraint in a rear seat.
Do not use child restraints in the center front seat position. When securing a child restraint in a rear seating position, study the instructions that came with the child restraint to make sure it is compatible with this vehicle. Child restraints and booster seats vary considerably in size, and some may fit in certain seating positions better than others. Depending on where you place the child restraint and the size of the child restraint, you may not be able to access adjacent safety belt assemblies or LATCH anchors for additional passengers or child restraints. Adjacent seating positions should not be used if the child restraint prevents access to or interferes with the routing of the safety belt. Wherever a child restraint is installed, be sure to secure the child restraint properly. Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure
Seats and Restraints
103
people in the vehicle. Be sure to properly secure any child restraint in the vehicle — even when no child is in it.
Lower Anchors and Tethers for Children (LATCH System) The LATCH system secures a child restraint during driving or in a crash. LATCH attachments on the child restraint are used to attach the child restraint to the anchors in the vehicle. The LATCH system is designed to make installation of a child restraint easier. In order to use the LATCH system in your vehicle, you need a child restraint that has LATCH attachments. LATCH-compatible rear-facing and forward-facing child seats can be properly installed using either the LATCH anchors or the vehicle’s safety belts. Do not use both the safety belts and the LATCH anchorage system to secure a rear-facing or forward-facing child seat.
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
104
Seats and Restraints
Booster seats use the vehicle’s safety belts to secure the child in the booster seat. If the manufacturer recommends that the booster seat be secured with the LATCH system, this can be done as long as the booster seat can be positioned properly and there is no interference with the proper positioning of the lap-shoulder belt on the child. Make sure to follow the instructions that came with the child restraint, and also the instructions in this manual. When installing a child restraint with a top tether, you must also use either the lower anchors or the safety belts to properly secure the child restraint. A child restraint must never be installed using only the top tether and anchor. The LATCH anchorage system can be used until the combined weight of the child plus the child restraint is 29.5 kg (65 lbs). Use the safety belt alone instead of the LATCH anchorage system once the combined weight is more than 29.5 kg (65 lbs).
Lower anchors (1) are metal bars built into the vehicle. There are two lower anchors for each LATCH seating position that will accommodate a child restraint with lower attachments (2). Top Tether Anchor
The following explains how to attach a child restraint with these attachments in the vehicle. Not all vehicle seating positions or child restraints have lower anchors and attachments or top tether anchors and attachments. In this case, the safety belt must be used (with top tether where available) to secure the child restraint. See Securing Child Restraints (Center Front Seat) 0 111 or Securing Child Restraints (Rear Seat) 0 112 or Securing Child Restraints (Front Passenger Seat) 0 114. Lower Anchors
A top tether (3, 4) anchors the top of the child restraint to the vehicle. A top tether anchor is built into the vehicle. The top tether attachment (2) on the child restraint connects to the top tether anchor in the vehicle in order to reduce the
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
forward movement and rotation of the child restraint during driving or in a crash. The child restraint may have a single tether (3) or a dual tether (4). Either will have a single attachment (2) to secure the top tether to the anchor. Some child restraints with top tethers are designed for use with or without the top tether being attached. Others require the top tether always to be attached. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached. Be sure to read and follow the instructions for your child restraint.
Seats and Restraints
105
Lower Anchor and Top Tether Anchor Locations
Second Row — 60/40
H (Lower Anchor) : Seating positions with two lower anchors. I (Top Tether Anchor) : Seating positions with top tether anchors.Second Row — Bucket H (Lower Anchor) : Seating positions with two lower anchors. I (Top Tether Anchor) : Seating positions with top tether anchors.
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
106
Seats and Restraints
To assist in locating the top tether anchors, the top tether anchor symbol is near the top tether anchors for second row seats. For third row seats (if equipped), the top tether anchor symbol is on the flipper panel.
Third Row Seat
I (Top Tether Anchor) : Seating positions with top tether anchors.
To assist in locating the lower anchors, each seating position with lower anchors has two labels, near the crease between the seatback and the seat cushion.
Second Row Seat — Bucket
For models with bucket second row seating, the top tether anchors are at the bottom rear of the seat
cushion for each seating position in the second row. Be sure to use an anchor on the same side of the vehicle as the seating position where the child restraint will be placed.
Second Row Seat — 60/40
For models with 60/40 second row seating, the top tether anchors are at the bottom rear of the seat cushion for each seating position in the second row. Be sure to use a top tether anchor directly behind the seating position where the child restraint will be placed.
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
According to accident statistics, children and infants are safer when properly restrained in a child restraint system or infant restraint system secured in a rear seating position. See Where to Put the Restraint 0 102 for additional information. Securing a Child Restraint Designed for the LATCH System
{ Warning
If a LATCH-type child restraint is not attached to anchors or with the safety belt, the child restraint will not be able to protect the child correctly. In a crash, the child could be seriously injured or killed. Install a LATCH-type child restraint properly using the anchors, or use the vehicle safety belts to secure the restraint, following the instructions that came with the child restraint and the instructions in this manual.
Seats and Restraints
107
{ Warning
To reduce the risk of serious or fatal injuries during a crash, do not attach more than one child restraint to a single anchor. Attaching more than one child restraint to a single anchor could cause the anchor or attachment to come loose or even break during a crash. A child or others could be injured.
{ Warning
Children can be seriously injured or strangled if a shoulder belt is wrapped around their neck. The shoulder belt can tighten but cannot be loosened if it is locked. The shoulder belt locks when it is pulled all the way out of the retractor. It unlocks when the shoulder belt is allowed to go all the way back into the retractor, but it cannot do this if it is
(Continued)
Third Row Seat
For models with a third row seat, the top tether anchors are on the back of the seatback. Move the flipper panel rearward to access the anchors. Be sure to use a top tether anchor directly behind the seating position where the child restraint will be placed. Do not secure a child restraint in a position without a top tether anchor if a national or local law requires that the top tether be attached, or if the instructions that come with the child restraint say that the top tether must be attached.
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
108
Seats and Restraints
Warning (Continued)
Caution (Continued)
wrapped around a child’s neck. If the shoulder belt is locked and tightened around a child’s neck, the only way to loosen the belt is to cut it. Buckle any unused safety belts behind the child restraint so children cannot reach them. Pull the shoulder belt all the way out of the retractor to set the lock, and tighten the belt behind the child restraint after the child restraint has been installed.
Caution
Do not let the LATCH attachments rub against the vehicle’s safety belts. This may damage these parts. If necessary, move buckled safety belts to avoid rubbing the LATCH attachments.
(Continued)
Do not fold the empty rear seat with a safety belt buckled. This could damage the safety belt or the seat. Unbuckle and return the safety belt to its stowed position, before folding the seat.
The vehicle may be equipped with a front center airbag in the inboard side of the driver seat. Even with a front center airbag, a child restraint can be installed in any second row seating position. If you need to secure more than one child restraint in the rear seat, see Where to Put the Restraint 0 102. This system is designed to make installation of child restraints easier. When using lower anchors, do not use the vehicle's safety belts. Instead use the vehicle's anchors and child restraint attachments to secure the restraints. Some restraints also use another vehicle anchor to secure a top tether.
1. Attach and tighten the lower
attachments to the lower anchors. If the child restraint does not have lower attachments or the desired seating position does not have lower anchors, secure the child restraint with the the safety belts and top tether when recommended by the child restraint manufacturer. Refer to your child restraint manufacturer instructions and the instructions in this manual. For the third row outboard seating positions, if the head restraint interferes with the proper installation of the child restraint, then the head restraint may be removed. See “Head Restraint Removal and Reinstallation under Lower Anchors and Tethers for Children (LATCH System) 0 103. 1.1. Find the lower anchors for
the desired seating position.
1.2. Put the child restraint on
the seat.
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
2.
1.3. Attach and tighten the
lower attachments on the child restraint to the lower anchors.
If the child restraint manufacturer recommends that the top tether be attached, attach and tighten the top tether to the top tether anchor. Refer to the child restraint instructions and the following steps: 2.1. Find the top tether anchor.
For models with a third row seat, move the flipper panel rearward to access the top tether anchors.
2.2. Route, attach, and tighten the top tether according to your child restraint instructions and the following instructions:
Seats and Restraints
109
are using a dual tether, route the tether over the seatback.
If the position you are using has an adjustable head restraint and you are using a single tether, raise the head restraint and route the tether under the head restraint and in between the head restraint posts.
If the position you are using does not have a head restraint and you are using a single tether, route the tether over the seatback.
If the position you are using does not have a head restraint and you
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
110
Seats and Restraints
If the position you are using has a fixed or an adjustable head restraint and you are using a dual tether, route the tether around the head restraint. 3. Before placing a child in the
child restraint, make sure it is securely held in place. To check, grasp the child restraint at the LATCH path and attempt to move it side to side and back and forth. There should be no more than 2.5 cm (1 in) of movement, for proper installation.
Head Restraint Removal and Reinstallation 1. Partially fold the seatback
forward. See Third Row Seats 0 71 for additional information.
If the position you are using has a fixed head restraint and you are using a single tether, route the tether around the inboard or outboard side of the head restraint.
2. Press the buttons on the head restraint posts, and pull up on the head restraint.
3. Route the tether of the child
restraint under the head restraint.
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
{ Warning
With head restraints that are not installed and adjusted properly, there is a greater chance that occupants will suffer a neck/ spinal injury in a crash. Do not drive until the head restraints for all occupants are installed and adjusted properly.
Replacing LATCH System Parts After a Crash { Warning
A crash can damage the LATCH system in the vehicle. A damaged LATCH system may not properly secure the child restraint, resulting in serious injury or even death in a crash. To help make sure the LATCH system is working properly after a crash, see your dealer to have the
Seats and Restraints
111
Warning (Continued)
system inspected and any necessary replacements made as soon as possible.
If the vehicle has the LATCH system and it was being used during a crash, new LATCH system parts may be needed. New parts and repairs may be necessary even if the LATCH system was not being used at the time of the crash.
Securing Child Restraints (Center Front Seat) { Warning
A child in a child restraint in the center front seat can be badly injured or killed by the frontal airbags if they inflate. Never secure a child restraint in the
(Continued)
(Continued)
4. With the head restraint facing
rearward, insert the head restraint posts into the holes in the top of the seatback.
5. Push the head restraint down. 6. Try to move the head restraint to make sure that it is locked in place.
7. When the child restraint is removed, reinstall the head restraint before the seating position is used.
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
112
Seats and Restraints
Warning (Continued)
center front seat. It is always better to secure a child restraint in a rear seat.
Do not use child restraints in the center front seat position.
Securing Child Restraints (Rear Seat) When securing a child restraint in a rear seating position, study the instructions that came with the child restraint to make sure it is compatible with this vehicle. If the child restraint has the LATCH system, see Lower Anchors and Tethers for Children (LATCH System) 0 103 for how and where to install the child restraint using LATCH. If a child restraint is secured in the vehicle using a safety belt and it uses a top tether, see Lower Anchors and Tethers for Children (LATCH System) 0 103 for top tether anchor locations.
Do not secure a child seat in a position without a top tether anchor if a national or local law requires that the top tether be anchored, or if the instructions that come with the child restraint say that the top strap must be anchored. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached. If the child restraint or vehicle seat position does not have the LATCH system, you will be using the safety belt to secure the child restraint in this position. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say. If more than one child restraint needs to be installed in the rear seat, be sure to read Where to Put the Restraint 0 102. 1. Put the child restraint on
the seat.
For the third row outboard seating positions, if the head restraint interferes with the proper installation of the child restraint, the head restraint may be removed. See “Head Restraint Removal and Reinstallation” under Lower Anchors and Tethers for Children (LATCH System) 0 103.
2. Pick up the latch plate, and run
the lap and shoulder portions of the vehicle's safety belt through or around the restraint. The child restraint instructions will show you how.
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
3. Push the latch plate into the
buckle until it clicks. If the latch plate will not go fully into the buckle, check to see if the correct buckle is being used. Position the release button on the buckle so that the safety belt could be quickly unbuckled if necessary.
4. Pull the shoulder belt all the
way out of the retractor to set the lock. When the retractor lock is set, the belt can be tightened but not pulled out of the retractor.
5. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor. When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt. Try to pull the belt out of the retractor to make sure the retractor is locked. If the retractor is not locked, repeat Steps 4 and 5.
Seats and Restraints
113
6.
If the child restraint has a top tether, follow the child restraint manufacturer’s instructions regarding the use of the top tether. Refer to the instructions that came with the child restraint and see Lower Anchors and Tethers for Children (LATCH System) 0 103.
7. Before placing a child in the
child restraint, make sure it is securely held in place. To check, grasp the child restraint at the safety belt path and attempt to move it side to side and back and forth. When the child restraint is properly installed, there should be no more than 2.5 cm (1 in) of movement.
To remove the child restraint, unbuckle the vehicle safety belt and let it return to the stowed position. If the top tether is attached to a top tether anchor, disconnect it. If the head restraint was removed for a third row outboard seating position, reinstall it before the
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
114
Seats and Restraints
seating position is used. See “Head Restraint Removal and Reinstallation” under Lower Anchors and Tethers for Children (LATCH System) 0 103 for additional information on reinstalling the head restraint properly.
Securing Child Restraints (Front Passenger Seat) This vehicle has airbags. A rear seat is a safer place to secure a forward-facing child restraint. See Where to Put the Restraint 0 102. In addition, the vehicle has a passenger sensing system which is designed to turn off the front outboard passenger frontal airbag under certain conditions. See Passenger Sensing System 0 90
and Passenger Airbag Status Indicator 0 138 for more information, including important safety information. Never put a rear-facing child seat in the front. This is because the risk to the rear-facing child is so great if the airbag deploys.{ Warning
A child in a rear-facing child restraint can be seriously injured or killed if the front outboard passenger frontal airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. A child in a forward-facing child restraint can be seriously injured or killed if the front outboard passenger frontal airbag inflates and the passenger seat is in a forward position. Even if the passenger sensing system has turned off the front outboard passenger frontal airbag, no system is fail-safe. No one can guarantee that an airbag will not deploy under some unusual circumstance, even though it is turned off. Secure rear-facing child restraints in a rear seat, even if the airbag is off. If you secure a
(Continued)
Warning (Continued)
forward-facing child restraint in the front seat, always move the front passenger seat as far back as it will go. It is better to secure the child restraint in a rear seat. See Passenger Sensing System 0 90 for additional information.
If the child restraint uses a top tether, see Lower Anchors and Tethers for Children (LATCH System) 0 103 for top tether anchor locations. Do not secure a child seat in a position without a top tether anchor if a national or local law requires that the top tether be anchored, or if the instructions that come with the child restraint say that the top strap must be anchored. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached.
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
When using the lap-shoulder belt to secure the child restraint in this position, follow the instructions that came with the child restraint and the following instructions: 1. Move the seat as far back as it
will go before securing the forward-facing child restraint. When the passenger sensing system has turned off the front outboard passenger frontal airbag, the off indicator on the passenger airbag status indicator should light and stay lit when you start the vehicle. See Passenger Airbag Status Indicator 0 138.
2. Put the child restraint on
the seat.
3. Pick up the latch plate, and run
the lap and shoulder portions of the vehicle's safety belt through or around the restraint. The child restraint instructions will show you how.
Seats and Restraints
115
Position the release button on the buckle so that the safety belt could be quickly unbuckled if necessary.
Tilt the latch plate to adjust the belt, if needed.
4. Push the latch plate into the
buckle until it clicks.
5. Pull the shoulder belt all the
way out of the retractor to set the lock. When the retractor lock is set, the belt can be tightened but not pulled out of the retractor.
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
116
Seats and Restraints
7. Before placing a child in the
child restraint, make sure it is securely held in place. To check, grasp the child restraint at the safety belt path and attempt to move it side to side and back and forth. When the child restraint is properly installed, there should be no more than 2.5 cm (1 in) of movement.
If the airbag is off, the off indicator in the passenger airbag status indicator will come on and stay on when the vehicle is started. If a child restraint has been installed and the on indicator is lit, see “If the On Indicator is Lit for a Child Restraint” under Passenger Sensing System 0 90. To remove the child restraint, unbuckle the vehicle safety belt and let it return to the stowed position.
6. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt, and feed the shoulder belt back into the retractor. When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt. Try to pull the belt out of the retractor to make sure the retractor is locked. If the retractor is not locked, repeat Steps 5 and 6.
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
Storage
Storage Compartments
Storage Compartments . . . . . . . 117
Instrument Panel Storage . . . . . 117
Glove Box . . . . . . . . . . . . . . . . . . . . 117
Cupholders . . . . . . . . . . . . . . . . . . . 117
Sunglasses Storage . . . . . . . . . . 118
Armrest Storage . . . . . . . . . . . . . . 118
Rear Storage . . . . . . . . . . . . . . . . . 118
Center Console Storage . . . . . . 118Additional Storage Features
Cargo Cover . . . . . . . . . . . . . . . . . . 119
Roof Rack System
Roof Rack System . . . . . . . . . . . 120
Storage Compartments { Warning
Do not store heavy or sharp objects in storage compartments. In a crash, these objects may cause the cover to open and could result in injury.
Instrument Panel Storage
Storage
117
If equipped with storage behind the radio, press and hold P to open. There is a USB port inside. See the infotainment manual. Press and hold P again to close. Keep the storage area closed when not in use. The storage area cannot be operated with P when valet mode is enabled. See Vehicle Personalization 0 160. The storage area can be operated manually.
Glove Box Lift up the glove box handle to open it. Use the key to lock and unlock the glove box.
Cupholders Cupholders are in the front of the console. If equipped, cupholders may be in the second and third row seat armrest areas.
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
118
Storage
To remove the cupholder for cleaning, press together the front top center of the cupholder and pull out from the chrome ring.
Sunglasses Storage
Armrest Storage For vehicles with a rear seat armrest, pull the loop at the top of the armrest down to access the cupholders.
Rear Storage
Center Console Storage
If equipped, sunglasses storage is on the overhead console. Press the fixed button on the cover and release to access. There may be a child-view mirror located within the sunglasses bin. Release the bin and then push up halfway to secure in position.
There is storage in the floor of the rear cargo area. Lift the handle to access. There is a removable divider to help organize.
Pull the handle and lift to access. There are auxiliary jacks, USB ports, an accessory power outlet, a tote compartment, and a device holder inside. On the rear of the console, there are auxiliary jacks, a High Voltage Power Outlet (HVPO), and an open storage area. See Power Outlets 0 127 and the infotainment manual.
Storage
119
On long wheelbase models there are two cover positions. The slots furthest forward allow the cover to be used if the third seat is removed or folded down. The cover can be installed and removed from either side.
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
Additional Storage Features
Cargo Cover
{ Warning
An unsecured cargo cover could strike people in a sudden stop or turn, or in a crash. Store the cargo cover securely or remove it from the vehicle.
To use the cargo cover, if equipped: 1. Pull the cover handle toward
the rear of the vehicle.
2. Latch the cover posts into the retaining sockets on the cargo area trim panels.
To return the cover to the retracted position: 1. Pull up on the cover handle to
release the cover posts from the retaining sockets.
2. Let the cover move forward to
the full retracted position.
To remove the cover: 1. Let the cover go all the way
into the holder.
2. Grasping the driver side cover
end cap, push the cover end cap toward the passenger side of the vehicle.
3. Swing the cover rearward and
take it out of the vehicle.
To put the cover in the vehicle: 1. Make sure the cover slot in the holder faces rearward with the round surface facing down.
2. Hold the cover at an angle and
place the cover end cap into the slot in the passenger side trim panel.
3. Move the other end of the
cover forward and hold it next to the driver side trim panel slot.
4. Press the end caps in, to allow the cover to fit into the trim slot.
5. Pull lightly on the cover holder
to make sure it is secure.
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
120
Storage
Roof Rack System
{ Warning
If something is carried on top of the vehicle that is longer or wider than the roof rack — like paneling, plywood, or a mattress — the wind can catch it while the vehicle is being driven. The item being carried could be violently torn off, and this could cause a collision and damage the vehicle. Never carry something longer or wider than the roof rack on top of the vehicle unless using a GM certified accessory carrier.
If equipped, the roof rack can be used to load items. For roof racks that do not have crossrails included, GM Certified crossrails can be purchased as an accessory. See your dealer for additional information.
Caution
Loading cargo on the roof rack that weighs more than 100 kg (220 lb) or hangs over the rear or sides of the vehicle may damage the vehicle. Load cargo so that it rests evenly between the crossrails, making sure to fasten cargo securely.
To prevent damage or loss of cargo when driving, check to make sure crossrails and cargo are securely fastened. Loading cargo on the roof rack will make the vehicle’s center of gravity higher. Avoid high speeds, sudden starts, sharp turns, sudden braking, or abrupt maneuvers, otherwise it may result in loss of control. If driving for a long distance, on rough roads, or at high speeds, occasionally stop the vehicle to make sure the cargo remains in its place.
Do not exceed the maximum vehicle capacity when loading the vehicle. For more information on vehicle capacity and loading, see Vehicle Load Limits 0 201. A Center High-Mounted Stoplamp (CHMSL) is located above the rear window glass. Make sure items loaded on the roof of the vehicle do not block or damage the CHMSL.
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
Instruments and Controls
121
Instruments and Controls
Controls
Steering Wheel Adjustment . . . 122
Steering Wheel Controls . . . . . . 123
Heated Steering Wheel . . . . . . . 123
Horn . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Windshield Wiper/Washer . . . . 123
Rear Window Wiper/Washer . . . . . . . . . . . . . . . . . . . . . 125
Compass . . . . . . . . . . . . . . . . . . . . . 126
Clock . . . . . . . . . . . . . . . . . . . . . . . . . 126
Power Outlets . . . . . . . . . . . . . . . . 127
Wireless Charging . . . . . . . . . . . . 129Warning Lights, Gauges, and Indicators
Warning Lights, Gauges, and
Indicators . . . . . . . . . . . . . . . . . . . 130
Instrument Cluster . . . . . . . . . . . . 131
Speedometer . . . . . . . . . . . . . . . . . 133
Odometer . . . . . . . . . . . . . . . . . . . . . 133
Trip Odometer . . . . . . . . . . . . . . . . 133
Tachometer . . . . . . . . . . . . . . . . . . . 133
Fuel Gauge . . . . . . . . . . . . . . . . . . . 133
Engine Oil PressureGauge . . . . . . . . . . . . . . . . . . . . . . 134
Engine Coolant Temperature
Gauge . . . . . . . . . . . . . . . . . . . . . . 135
Voltmeter Gauge . . . . . . . . . . . . . 136
Safety Belt Reminders . . . . . . . . 136
Airbag Readiness Light . . . . . . . 137
Passenger Airbag StatusIndicator . . . . . . . . . . . . . . . . . . . . 138
Charging System Light . . . . . . . 138
Malfunction Indicator Lamp(Check Engine Light) . . . . . . . . 139
Brake System Warning
Light . . . . . . . . . . . . . . . . . . . . . . . . 141
Antilock Brake System (ABS)
Warning Light . . . . . . . . . . . . . . . 141
Tow/Haul Mode Light . . . . . . . . . 142
Lane Keep Assist (LKA)Light . . . . . . . . . . . . . . . . . . . . . . . . 142
Vehicle Ahead Indicator . . . . . . 142
Traction Off Light . . . . . . . . . . . . . 142
StabiliTrak® OFF Light . . . . . . . . 143
Traction Control System (TCS)/StabiliTrak® Light . . . . . . . . . . . 143
Tire Pressure Light . . . . . . . . . . . 143
Low Fuel Warning Light . . . . . . 144
Security Light . . . . . . . . . . . . . . . . . 144
High-Beam On Light . . . . . . . . . . 144
Front Fog Lamp Light . . . . . . . . . 145
Lamps On Reminder . . . . . . . . . 145
Cruise Control Light . . . . . . . . . . 145Information Displays
Driver Information
Center (DIC) . . . . . . . . . . . . . . . . 146
Vehicle Messages
Vehicle Messages . . . . . . . . . . . . 148
Battery Voltage and ChargingMessages . . . . . . . . . . . . . . . . . . . 149
Brake System Messages . . . . . 149
Compass Messages . . . . . . . . . . 150
Cruise Control Messages . . . . . 150
Door Ajar Messages . . . . . . . . . . 151
Engine Cooling SystemMessages . . . . . . . . . . . . . . . . . . . 151
Engine Oil Messages . . . . . . . . . 152
Engine Power Messages . . . . . 152
Fuel System Messages . . . . . . . 152
Key and Lock Messages . . . . . 152
Lamp Messages . . . . . . . . . . . . . . 153
Object Detection SystemMessages . . . . . . . . . . . . . . . . . . . 153
Ride Control System
Messages . . . . . . . . . . . . . . . . . . . 155
Airbag System Messages . . . . 156
Security Messages . . . . . . . . . . . 156
Steering SystemMessages . . . . . . . . . . . . . . . . . . . 157
Starting the Vehicle
Messages . . . . . . . . . . . . . . . . . . . 157
Tire Messages . . . . . . . . . . . . . . . . 157
Transmission Messages . . . . . . 158GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
122
Instruments and Controls
Vehicle Reminder
Messages . . . . . . . . . . . . . . . . . . . 159
Washer Fluid Messages . . . . . . 160Vehicle Personalization
Vehicle Personalization . . . . . . . 160
Universal Remote System
Controls
Steering Wheel Adjustment
Power Tilt and Telescope Steering Wheel
Universal Remote System . . . . 167
Universal Remote SystemProgramming . . . . . . . . . . . . . . . 167
Universal Remote System
Operation . . . . . . . . . . . . . . . . . . . 169
To adjust the power tilt and telescope steering wheel, if equipped: Press the control to move the steering wheel up and down or forward and rearward. Do not adjust the steering wheel while driving.
To adjust the steering wheel: 1. Hold the steering wheel and
pull the lever.
2. Move the steering wheel up
or down.
3. Release the lever to lock the
wheel in place.
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
Instruments and Controls
123
Steering Wheel Controls The infotainment system can be operated by using the steering wheel controls. See "Steering Wheel Controls" in the infotainment manual.
Heated Steering Wheel
Horn To sound the horn, press a on the steering wheel.
Windshield Wiper/Washer
The windshield wiper control is on the turn signal lever. The windshield wipers are controlled by turning the band with z FRONT on it. 1 (High Speed) : Fast wipes. w (Low Speed) : Slow wipes. 3 INT (Intermittent Wipes) : Turn the z FRONT band up for more frequent wipes or down for less frequent wipes. OFF : Turns the windshield wipers off.
( (Heated Steering Wheel, If Equipped) : Press to turn it on or off. A light next to the button displays when the feature is turned on. The steering wheel takes about three minutes to start heating.
8 (Mist) : For a single wipe, turn to 8, then release. For several wipes, hold the band on 8 longer. Clear ice and snow from the wiper blades before using them. If frozen to the windshield, carefully loosen or thaw them. Damaged wiper blades should be replaced. See Wiper Blade Replacement 0 295. Heavy snow or ice can overload the wiper motor. An internal circuit breaker to the motor will stop the motor until it cools down.
Wiper Parking If the ignition is put in OFF while the wipers are on w, 1, or 3 INT, they will immediately stop. If z FRONT is then moved to OFF before the driver door is opened or within 10 minutes, the wipers will restart and move to the base of the windshield.
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
124
Instruments and Controls
If the ignition is put in OFF while the wipers are performing wipes due to windshield washing or Rainsense, the wipers continue to run until they reach the base of the windshield. Rainsense™ With Rainsense, a sensor near the top center of the windshield detects the amount of water on the windshield and controls the frequency of the windshield wiper. Keep this area of the windshield clear of debris to allow for best system performance. 3 INT (Rainsense Wipe Sensitivity) : Turn the z FRONT band on the wiper lever to adjust the sensitivity when Rainsense is turned on.
. Turn the band up to a higher INT
setting for more sensitivity to moisture.
. Turn the band down to the lower INT setting for less sensitivity to moisture.
Move the band out of the 3 INT position to deactivate Rainsense.
z AUTO (Rainsense On/Off) : Press to turn Rainsense on or off. When turned on and z FRONT is in one of the Rainsense wipe sensitivity positions, the wipers can be adjusted for more or less sensitivity to moisture by adjusting the INT position. When turned off, the wipers operate as timed intermittent wipers and can be adjusted for more or less frequent wipes.
If z AUTO is on when the ignition is turned on, or if the ignition is in ON/RUN and the z FRONT band is in one of the sensitivity settings when z AUTO is turned on or off, a message may display indicating if Rainsense was turned on or off. If the ignition is in ON/RUN and z FRONT is not in one of the sensitivity settings when z AUTO is turned on, a message may display indicating that the wiper band must be in one of the sensitivity settings for Rainsense to operate.
Wiper Arm Assembly Protection When using an automatic car wash, move the windshield wiper lever to OFF. This disables the automatic Rainsense windshield wipers. With Rainsense, if the transmission is in N (Neutral) and the vehicle speed is very slow, the wipers may automatically stop at the base of the windshield.
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
The wiper operations return to normal when the transmission is no longer in N (Neutral) or the vehicle speed has increased. Windshield Washer
{ Warning
In freezing weather, do not use the washer until the windshield is warmed. Otherwise the washer fluid can form ice on the windshield, blocking your vision.
L m (Washer Fluid) : Push the paddle marked with the windshield washer symbol at the top of the turn signal lever to spray washer fluid and activate the wipers. The wipers will continue until the paddle is released or the maximum wash time is reached. When the paddle is released, additional wipes may occur depending on how long the windshield washer had been activated. See Washer Fluid 0 287
for information on filling the windshield washer fluid reservoir.Instruments and Controls
125
Rear Window Wiper/ Washer
The rear wiper control is on the turn signal lever. To turn the rear wiper on, slide the lever to a wiper position. OFF : Turns the wiper off. INT (Intermittent Wipes) : Turns on the rear wiper with a delay between wipes. ON (Rear Wipes) : Turns on the rear wiper. = REAR (Rear Wiper Wash) : Press this button on the end of the lever to spray washer fluid on the rear window. The wipers will clear the rear window and either stop or return to your preset speed. For more washer cycles, press and hold the button.
The rear window wiper/washer will not operate if the liftgate or liftglass is open or ajar. If the liftgate or liftglass is opened while the rear wiper is on, the wiper returns to the parked position and stops.
Rear Wiper Arm Assembly Protection When using an automatic car wash, move the rear wiper control to OFF to disable the rear wiper. In some vehicles, if the transmission is in N (Neutral) and the vehicle speed is very slow, the rear wiper will automatically park under the rear spoiler. The wiper operations return to normal when the transmission is no longer in N (Neutral) or the vehicle speed has increased.
Reverse Gear Wipes If the rear wiper control is off, the rear wiper will automatically operate continuously when the shift lever is in R (Reverse), and the front windshield wiper is performing low or high speed wipes. If the rear wiper control is off, the shift lever is
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
126
Instruments and Controls
in R (Reverse), and the front windshield wiper is performing interval wipes, then the rear wiper automatically performs interval wipes. This feature can be turned on or off. See Vehicle Personalization 0 160. The windshield washer reservoir is used for the windshield and the rear window. Check the fluid level in the reservoir if either washer is not working. See Washer Fluid 0 287.
Compass The vehicle may have a compass display on the Driver Information Center (DIC). The compass receives its heading and other information from the Global Positioning System (GPS) antenna, StabiliTrak®, and vehicle speed information. The compass system is designed to operate for a certain number of miles or degrees of turn before needing a signal from the GPS satellites. When the compass display shows CAL, drive the vehicle for a short distance in an
open area where it can receive a GPS signal. The compass system will automatically determine when a GPS signal is restored and provide a heading again. See Compass Messages 0 150 for the messages that may be displayed for the compass.
Clock
Setting the Time and Date with Faceplate Controls To set the time or date: 1. Select SETTINGS from the
Home Page, then select Time and Date.
2. Select the desired function. 3. Turn the MENU knob to
increase or decrease the value. 4. Press the MENU knob to go to
the next value. After the last value is selected, the system will update and return to the Settings menu. Press o BACK to go to the last menu and save the changes.
Auto Set requires an active connection to OnStar. If auto timing is set, the time displayed on the clock may not update immediately when driving into a new time zone. To set the clock display: 1. Select SETTINGS from the
Home Page, then select Time and Date.
2. Select Clock Display. 3. Turn the MENU knob to Off
or On.
4. Press the MENU knob to
select.
Press o BACK to go to the last menu and save the changes. Setting the Time and Date with Touchscreen Controls To set the time: 1. Touch SETTINGS on the Home
Page, then touch Time and Date.
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
2. Touch Set Time, then touch « or ª to increase or decrease hours, minutes, and AM or PM. Touch 12–24 Hr for 12 or 24 hour clock.
3. Touch } to go back to the
previous menu.
Auto Set requires an active connection to OnStar. If auto timing is set, the time displayed on the clock may not update immediately when driving into a new time zone. To set the date: 1. Touch SETTINGS on the Home
Page, then touch Time and Date.
2. Touch Set Date, then touch « or ª to increase or decrease month, day, or year.
3. Touch } to go back to the
previous menu.
Instruments and Controls
127
To set the clock display: 1. Touch SETTINGS on the Home
Page, then touch Time and Date.
2. Touch Clock Display, then
touch OFF or ON to turn the clock display off or on.
3. Touch } to go back to the
previous menu.
Power Outlets
Power Outlets 12 Volt Direct Current Accessory power outlets can be used to plug in electrical equipment, such as a cell phone, MP3
player, etc. The vehicle may have up to five accessory power outlets:Vehicles with a Center Console . One in front of the cupholders on
the center console.
. One inside the center storage
console.
. One on the rear of the center
storage console.
. One in the third row seat on the
driver side.
. One in the rear cargo area on
the passenger side.
Vehicles with Bench Seats . One on the center stack below
the climate control system.
. One in the storage area on the
bench seat.
. One on the rear of the center
armrest storage.
. One in the third row seat area on
the driver side.
. One in the rear cargo area on
the passenger side.
Lift the cover to access and replace when not in use. The accessory power outlets are powered as follows: . The power outlet near the
cupholders for vehicles with a center console or on the center stack for vehicles with bench seats, can be configured to operate using Retained Accessory Power (RAP) or
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
128
Instruments and Controls
battery power modes. If these power outlets are used while in the battery power mode, this could cause interference between the Remote Keyless Entry (RKE) transmitter and the vehicle, and the vehicle may not start. See Ignition Positions (Keyless Access) 0 206 or Ignition Positions (Key Access) 0 208.
. The power outlets in the third
row seat area or in the rear cargo area are powered at all times. The power outlets inside the storage area, on the rear of the console, or on the bench seat are only powered when the ignition is in ON/RUN or ACC/ ACCESSORY, or when RAP is active.
{ Warning
Power is always supplied to the outlet, if configured accordingly. Do not leave electrical equipment plugged in when the vehicle is not (Continued)
Warning (Continued)
in use because the vehicle could catch fire and cause injury or death.
Caution
Leaving electrical equipment plugged in for an extended period of time while the ignition is in LOCK/OFF will drain the battery. Always unplug electrical equipment when not in use and do not plug in equipment that exceeds the maximum 15 ampere rating.
Certain power accessory plugs may not be compatible with the accessory power outlet and could overload vehicle or adapter fuses. If a problem is experienced, see your dealer.
When adding electrical equipment, be sure to follow the proper installation instructions included with the equipment. See Add-On Electrical Equipment 0 269.
Caution
Hanging heavy equipment from the power outlet can cause damage not covered by the vehicle warranty. The power outlets are designed for accessory power plugs only, such as cell phone charge cords.
Power Outlet 110/120 Volt Alternating Current If equipped with this power outlet, it can be used to plug in electrical equipment that uses a maximum limit of 150 watts. For vehicles with a center console, the 110/120 volt power outlet is on the rear of the center console.
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
Instruments and Controls
129
For vehicles with bench seats, the 110/120 volt power outlet is on the center stack below the climate controls. An indicator light on the outlet turns on to show it is in use. The light comes on when the ignition is in ON/RUN, equipment requiring less than 150 watts is plugged into the outlet, and no system fault is detected. The indicator light does not come on when the ignition is in LOCK/OFF or if the equipment is not fully seated into the outlet. If equipment is connected using more than 150 watts or a system fault is detected, a protection circuit shuts off the power supply and the indicator light turns off. To reset the circuit, unplug the item and plug it back in or turn the ignition off and then back to ON/RUN. The power restarts when equipment using 150
watts or less is plugged into the outlet and a system fault is not detected.The power outlet is not designed for the following, and may not work properly if they are plugged in: . Equipment with high initial peak
wattage, such as compressor-driven refrigerators and electric power tools.
. Other equipment requiring an
extremely stable power supply, such as microcomputer-controlled electric blankets and touch sensor lamps.
. Medical equipment.
Wireless Charging The vehicle may have wireless charging on top of the center console. See Center Console Storage 0 118. The system wirelessly charges one PMA or Qi compatible mobile device. To check for phone or other device compatibility, see www.gmtotalconnect.com.
{ Warning
Wireless charging can affect the operation of an implanted pacemaker or other medical devices. If you have one, it is recommended to consult with your doctor before using the wireless charging system.
The vehicle must be in ON/RUN, ACC/ACCESSORY, or Retained Accessory Power (RAP). The wireless charging feature may not correctly indicate charging when the vehicle is in RAP. See Retained Accessory Power (RAP) 0 212. The operating temperature is −20 °C (−4 °F) to 60 °C (140 °F) for the charging system and 0 °C (32 °F) to 35 °C (95 °F) for the phone. { Warning
Remove all metal objects from the charging pad before charging your mobile device. Metal objects, (Continued)
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
130
Instruments and Controls
Warning (Continued)
such as coins, keys, rings, or paper clips, between the phone and charging pad will become very hot. On the rare occasion that the charging system does not detect a metal object, and the object gets wedged between the phone and charger, remove the phone and allow the metallic object to cool before removing it from the charging pad, to prevent burns.
1. Remove all objects from the
charging pad. The system may not charge if there are any objects on the charging pad. 2. Place the mobile device face up on the @ symbol on the charging pad.
3. The } will display on the V on the infotainment screen. This indicates that the mobile device is properly positioned and charging. If a phone is placed on the charging pad and } does not display, remove the phone from the pad, and wait three seconds before placing/aligning the phone on the pad again.
Warning Lights, Gauges, and Indicators Warning lights and gauges can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement. Paying attention to the warning lights and gauges could prevent injury. Some warning lights come on briefly when the engine is started to indicate they are working. When one of the warning lights comes on and stays on while driving, or when one of the gauges shows there may be a problem, check the section that explains what to do. Waiting to do repairs can be costly and even dangerous.
To charge a mobile device:
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
Instrument Cluster
Instruments and Controls
131
English Shown, Metric Similar
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
132
Instruments and Controls
Cluster Menu There is an interactive display area in the center of the instrument cluster.
Info App. This is where the selected Driver Information Center (DIC) displays can be viewed. See Driver Information Center (DIC) 0 146.
. Audio . Phone . Navigation . Settings
Audio
Press V to select the Audio app, then press p to enter the Audio menu. In the Audio menu browse for music, select from the favorites, or change the audio source. In the main application view, use w or x to change the station or go to the next or previous track.
Phone
Press V to select the Phone app, then press p to enter the Phone menu. In the Phone menu, if there is no active phone call, view recent calls, scroll through contacts, select from the favorites, or change the
Use the right steering wheel control to open and scroll through the different items and displays. Press o to access the cluster applications. Use w or x to scroll through the list of available applications. Not all applications will be available on all vehicles.
phone source. If there is an active call, mute the phone or switch to handset operation.
Navigation
Press V to select the Navigation app, then press p to enter the Navigation menu. If there is no active route, you can resume the last route and turn the voice prompts on/off. If there is an active route, you can cancel the route.
Settings
Press V to select the Settings app. Use w or x to scroll through items in the Settings menu. Units : Press p while Units is displayed to enter the Units menu. Choose English or metric units by pressing V while the desired item is highlighted. A checkmark will be displayed next to the selected item. Info Pages : Press p while Info Pages is displayed to enter the Info Pages menu and select the items to
GMC Yukon/Yukon XL Owner Manual 9159297) - 2016 - crc - 5/13/15
(GMNA-Localizing-U.S/Canada-
Instruments and Controls
133
Odometer The odometer shows how far the vehicle has been driven, in either kilometers or miles.
Trip Odometer The trip odometer shows how far the vehicle has been driven since the trip odometer was last reset. The trip odometer is accessed and reset through the Driver Information Center (DIC). See Driver Information Center (DIC) 0 146.
Tachometer The tachometer displays the engine speed in revolutions per minute (rpm).
be displayed in the Info app. See Driver Information Center (DIC) 0 146. Speed Warning : The Speed Warning display allows the driver to set a speed that they do not want to exceed. To set the Speed Warning, press p when Speed Warning is displayed, or press V on the main view to set the speed value. Press w or x to adjust the value. Press V to set the speed. Once the speed is set, this feature can be turned off by pressing V while viewing this page. If the selected speed limit is
