2015 GMC Terrain Owners Manual

light flashes and a chime may come on to remind passengers to fasten their safety belt. Then the light stays on solid until the belt is buckled. This cycle continues several times if the passenger remains or becomes unbuckled while the vehicle is moving. If the passenger safety belt is buckled, neither the chime nor the light comes on.

The front passenger safety belt reminder light and chime may turn on if an object is put on the seat such as a briefcase, handbag, grocery bag, laptop, or other electronic device. To turn off the reminder light and/or chime, remove the object from the seat or buckle the safety belt.

Airbag Readiness Light This light shows if there is an electrical problem with the airbag system. The system check includes the airbag sensor(s), passenger sensing system, the pretensioners, the airbag modules, the wiring, and the crash sensing and diagnostic module. For more information on the airbag system, see Airbag System on page 3-20.

The airbag readiness light comes on for several seconds when the vehicle is started. If the light does not come on then, have it fixed immediately.

{ Warning

If the airbag readiness light stays on after the vehicle is started or comes on while driving, it means the airbag system might not be working properly. The airbags in the vehicle might not inflate in a crash, or they could even inflate without a crash. To help avoid injury, have the vehicle serviced right away.

If there is a problem with the airbag system, a Driver Information Center (DIC) message may also come on. See Airbag System Messages on page 5-29.

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (11,1)

Instruments and Controls

5-11

Passenger Airbag Status Indicator The vehicle has a passenger sensing system. See Passenger Sensing System on page 3-26 for important safety information. The overhead console has a passenger airbag status indicator.

United States

Canada and Mexico

When the vehicle is started, the passenger airbag status indicator will light ON and OFF, or the symbol for on and off, for several seconds

as a system check. Then, after several more seconds, the status indicator will light either ON or OFF, or either the on or off symbol to let you know the status of the front outboard passenger frontal airbag. If the word ON or the on symbol is lit on the passenger airbag status indicator, it means that the front outboard passenger frontal airbag is allowed to inflate. If the word OFF or the off symbol is lit on the passenger airbag status indicator, it means that the passenger sensing system has turned off the front outboard passenger frontal airbag. If, after several seconds, both status indicator lights remain on, or if there are no lights at all, there may be a problem with the lights or the passenger sensing system. See your dealer for service.

{ Warning

If the airbag readiness light ever comes on and stays on, it means that something may be wrong with the airbag system. To help avoid injury to yourself or others, have the vehicle serviced right away. See Airbag Readiness Light on page 5-10 for more information, including important safety information.

Charging System Light

The charging system light comes on briefly when the ignition is turned on, but the engine is not running, as a check to show the light is working.

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (12,1)

5-12

Instruments and Controls

The light turns off when the engine is started. If it does not, have the vehicle serviced by your dealer. If the light stays on, or comes on while driving, there may be a problem with the electrical charging system. Have it checked by your dealer. Driving while this light is on could drain the battery. When this light comes on, the Driver Information Center (DIC) also displays a message. See Battery Voltage and Charging Messages on page 5-24. If a short distance must be driven with the light on, be sure to turn off all accessories, such as the radio and air conditioner.

Malfunction Indicator Lamp A computer system called OBD II (On-Board Diagnostics-Second Generation) monitors the operation of the vehicle to ensure emissions are at acceptable levels, helping to

maintain a clean environment. The malfunction indicator lamp comes on when the vehicle is placed in ON/RUN, as a check to show it is working. If it does not, have the vehicle serviced by your dealer. See Ignition Positions on page 9-19.

If the malfunction indicator lamp comes on while the engine is running, this indicates that the OBD II system has detected a problem and diagnosis and service might be required. Malfunctions often are indicated by the system before any problem is apparent. Being aware of the light can prevent more serious damage to the vehicle. This system also assists the service technician in correctly diagnosing any malfunction.

{ Caution

If the vehicle is continually driven with this light on, the emission controls might not work as well, the vehicle fuel economy might not be as good, and the engine might not run as smoothly. This could lead to costly repairs that might not be covered by the vehicle warranty.

{ Caution

Modifications made to the engine, transmission, exhaust, intake, or fuel system of the vehicle or the replacement of the original tires with other than those of the same Tire Performance Criteria (TPC) can affect the vehicle's emission controls and can cause this light to come on. Modifications to these systems

(Continued)

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (13,1)

Caution (Continued)

could lead to costly repairs not covered by the vehicle warranty. This could also result in a failure to pass a required Emission Inspection/Maintenance test. See Accessories and Modifications on page 10-2.

This light may come on during a malfunction in one of two ways: Light Flashing: A misfire condition has been detected. A misfire increases vehicle emissions and could damage the emission control system on the vehicle. Diagnosis and service might be required. To prevent more serious damage to the vehicle: . Reduce vehicle speed. . Avoid hard accelerations. . Avoid steep uphill grades.

Instruments and Controls

5-13

If towing a trailer, reduce the amount of cargo being hauled as soon as it is possible.

If the light continues to flash, find a safe place to stop and park the vehicle. Turn the vehicle off, wait at least 10 seconds, and restart the engine. If the light is still flashing, follow the previous steps and see your dealer for service as soon as possible. Light On Steady: An emission control system malfunction has been detected on the vehicle. Diagnosis and service might be required. The following may correct an emission control system malfunction: . Check that the fuel cap is fully

installed. See Filling the Tank on page 9-49. The diagnostic system may be able to determine if the fuel cap has been left off or improperly installed. A loose or missing fuel cap could allow fuel to evaporate

into the atmosphere. A few driving trips with the cap properly installed may turn the light off.

. Check that good quality fuel is used. Poor fuel quality causes the engine not to run as efficiently as designed and may cause stalling after start-up, stalling when the vehicle is changed into gear, misfiring, hesitation on acceleration, or stumbling on acceleration. These conditions might go away once the engine is warmed up. If this occurs, change the fuel brand used. It may require at least one full tank of the proper fuel to turn the light off.

See Fuel on page 9-46. If the light remains on, your dealer can check the vehicle. The dealer has the proper test equipment and diagnostic tools to fix any mechanical or electrical problems that might have developed.

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (14,1)

5-14

Instruments and Controls

Emissions Inspection and Maintenance Programs Depending on where you live, your vehicle may be required to participate in an emission control system inspection and maintenance program. For the inspection, the emission system test equipment will likely connect to the vehicle's Data Link Connector (DLC).

the ignition is turned to ON/RUN while the engine is off. See your dealer for assistance in verifying proper operation of the malfunction indicator lamp. The OBD II (On-Board Diagnostics) system determines that critical emission control systems have not been completely diagnosed. The vehicle would be considered not ready for inspection. This can happen if the 12-volt battery has recently been replaced or run down.

Brake System Warning Light The vehicle brake system consists of two hydraulic circuits. If one circuit is not working, the remaining circuit can still work to stop the vehicle. For normal braking performance, both circuits need to be working

The DLC is under the instrument panel to the left of the steering wheel. See your dealer if assistance is needed. The vehicle may not pass inspection if:

The malfunction indicator lamp is on with the engine running, or if the light does not come on when

The diagnostic system is designed to evaluate critical emission control systems during normal driving. This can take several days of routine driving. If this has been done and the vehicle still does not pass the inspection for lack of OBD II system readiness, your dealer can prepare the vehicle for inspection.

Metric

English

The brake indicator light should come on briefly as the engine is started. If it does not come on have the vehicle serviced by your dealer. When the ignition is on, the brake system warning light comes on when the parking brake is set. The light stays on if the parking brake does not fully release. If it stays on after the parking brake is fully

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (15,1)

Instruments and Controls

5-15

released, there is a brake problem. Have the brake system inspected immediately.

Antilock Brake System (ABS) Warning Light

{ Warning

The brake system might not be working properly if the brake system warning light is on. Driving with the brake system warning light on can lead to a crash. If the light is still on after the vehicle has been pulled off the road and carefully stopped, have the vehicle towed for service.

If the light comes on while driving, a chime sounds. Pull off the road and stop. The pedal might be harder to push or go closer to the floor. It might also take longer to stop. If the light is still on, have the vehicle towed for service. See Towing the Vehicle on page 10-69.

For vehicles with the Antilock Brake System (ABS), this light comes on briefly when the engine is started. If the light does not come on, have it fixed so it will be ready to warn if there is a problem. If the ABS light comes on and stays on while driving, stop as soon as possible and turn the ignition off. Start the engine again to reset the system. If the light stays on after driving at a speed above 20 km/h (13 mph), see your dealer for service. A chime may also sound when the light comes on steady.

If the regular brake system warning light is not on, the vehicle still has brakes, but not antilock brakes. If the regular brake system warning light is also on, the vehicle does not have antilock brakes and there is a problem with the regular brakes. See Brake System Warning Light on page 5-14. See Brake System Messages on page 5-24 for all brake‐related DIC messages.

Lane Departure Warning (LDW) Light

If equipped, this light, located in the center of the instrument panel, comes on briefly while starting the vehicle.

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (16,1)

5-16

Instruments and Controls

If it does not come on, have the vehicle serviced. This light is green if LDW is on and ready to operate. This light changes to amber and flashes to indicate that the lane marking has been crossed without using a turn signal in that direction. See Lane Departure Warning (LDW) on page 9-45.

Forward Collision Alert (FCA) Warning Light This light is on the center of the instrument panel.

The red forward collision alert comes on and flashes when a vehicle is being approached too rapidly.

Traction Off Light

The forward collision alert stays on when following a vehicle much too closely. See Forward Collision Alert (FCA) System on page 9-37.

Vehicle Ahead Indicator

If equipped, this indicator will display green when a vehicle is detected ahead See Forward Collision Alert (FCA) System on page 9-37.

This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. If the system is working normally, the indicator light then turns off. The traction off light comes on when the Traction Control System (TCS) has been turned off by pressing and releasing the TCS/StabiliTrak button. This light and the StabiliTrak OFF light come on when StabiliTrak is turned off. If the TCS is off, wheel spin is not limited. Adjust driving accordingly. See Traction Control/Electronic Stability Control on page 9-32.

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (17,1)

Instruments and Controls

5-17

StabiliTrak® OFF Light

Traction Control System (TCS)/StabiliTrak® Light

This light comes on briefly while starting the vehicle. If it does not, have the vehicle serviced by your dealer. This light comes on when the StabiliTrak system is turned off. If StabiliTrak is off, the Traction Control System (TCS) is also off. If the StabiliTrak and TCS are off, the system does not assist in controlling the vehicle. Turn on the TCS and the StabiliTrak systems and the warning light turns off. See Traction Control/Electronic Stability Control on page 9-32.

This light comes on briefly when the engine is started. If the light does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light turns off. If the light is on and not flashing, the TCS and potentially the StabiliTrak system have been disabled. A DIC message may display. Check the DIC messages to determine which feature(s) is no longer functioning and whether the vehicle requires service.

If the indicator/warning light is on and flashing, the TCS and/or the StabiliTrak system is actively working. See Traction Control/Electronic Stability Control on page 9-32.

Tire Pressure Light

For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on briefly when the engine is started. It provides information about tire pressures and the TPMS.

When the Light Is On Steady This indicates that one or more of the tires are significantly underinflated.

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (18,1)

5-18

Instruments and Controls

A Driver Information Center (DIC) tire pressure message may also display. See Tire Messages on page 5-29. Stop as soon as possible, and inflate the tires to the pressure value shown on the Tire and Loading Information label. See Tire Pressure on page 10-45.

When the Light Flashes First and Then Is On Steady If the light flashes for about a minute and then stays on, there may be a problem with the TPMS. If the problem is not corrected, the light will come on at every ignition cycle. See Tire Pressure Monitor Operation on page 10-47.

Engine Oil Pressure Light

{ Caution Lack of proper engine oil maintenance can damage the engine. Driving with the engine

(Continued)

Caution (Continued)

low can also damage the

oil engine. The repairs would not be covered by the vehicle warranty. Check the oil level as soon as possible. Add oil if required, but if the oil level is within the operating range and the oil pressure is still low, have the vehicle serviced. Always follow the maintenance schedule for changing engine oil.

This light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer. If the light comes on and stays on, it means that oil is not flowing through the engine properly. The vehicle

could be low on oil and might have some other system problem. See your dealer.

Fuel Economy Light

For vehicles with the Fuel Economy Mode light, it comes on when the eco (economy) button near the shift lever is pressed. For vehicles with a Driver Information Center (DIC) an ECO MODE ON message displays. See Fuel System Messages on page 5-27. Press the button again to turn off the light and exit the fuel saver mode.

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (19,1)

Instruments and Controls

5-19

Low Fuel Warning Light

For vehicles with a Driver Information Center (DIC), see Fuel System Messages on page 5-27 for more information.

Security Light

High-Beam On Light

English Shown, Metric Similar

This light comes on for a few seconds when the ignition is turned on as a check to indicate it is working. If it does not come on, have it fixed. The low fuel warning light is a circle located on the fuel gauge. This light comes on and a chime sounds periodically when the vehicle is low on fuel. The light goes off when fuel is added to the fuel tank.

The security light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light turns off. If the light stays on and the engine does not start, there could be a problem with the theft-deterrent system. See Immobilizer Operation on page 2-14.

The high‐beam on light comes on when the high-beam headlamps are in use. See Headlamp High/Low-Beam Changer on page 6-1 for more information.

Front Fog Lamp Light

The fog lamp light comes on when the fog lamps are in use.

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (20,1)

5-20

Instruments and Controls

Cruise Control Light

Information Displays

The light goes out when the fog lamps are turned off. See Fog Lamps on page 6-4 for more information.

Lamps On Reminder

For vehicles with the lamps on reminder light, it comes on when the lights are in use.

For vehicles with cruise control, the cruise control light is white when the cruise control is on and ready, and turns green when the cruise control is set and active. The light turns off when the cruise control is turned off. See Cruise Control on page 9-34.

Driver Information Center (DIC) The vehicle may have a Driver Information Center (DIC). It displays information about the vehicle and warning messages if there is a system problem detected. DIC messages display in the center of the instrument cluster. See Vehicle Messages on page 5-24. The vehicle may also have features that can be customized through the controls on the radio. See Vehicle Personalization on page 5-31. DIC Operation and Displays Use the DIC buttons located in the center of the instrument panel to access different displays. The DIC displays trip, fuel, vehicle system information, and warning messages. It also shows the shift lever position, the odometer, and the direction the vehicle is driving.

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (21,1)

DIC Buttons

MENU: Press this button to get to the Trip/Fuel Menu and the Vehicle Information Menu. Q or R : Use these buttons to scroll through the items in each menu. A small marker will move along the page as you scroll through the items. This shows where each page is in the menu. SET/CLR (Set/Clear): Use this button to set or clear the menu item when it is displayed.

Instruments and Controls

5-21

Trip/Fuel Menu Items Press the MENU button until Trip/ Fuel Information Menu is displayed. Then press R to scroll through the following menu items: . Digital Speedometer

Trip 1
Trip 2
Fuel Range

. Average Fuel Economy . Best Average Fuel Economy . Average Vehicle Speed

Timer

. Navigation . Blank Display

Digital Speedometer The speedometer shows how fast the vehicle is moving in either kilometers per hour (km/h) or miles per hour (mph). The speedometer cannot be reset.

Trip 1 and Trip 2
This display shows the current distance traveled, in either kilometers (km) or miles (mi), since the last reset for the trip odometer. The trip odometer can be reset to zero by pressing SET/CLR while the trip odometer display is showing.

Fuel Range This display shows the approximate distance the vehicle can be driven without refueling. The fuel range estimate is based on an average of the vehicle's fuel economy over recent driving history and the amount of fuel remaining in the fuel tank. Fuel range cannot be reset.

Average Fuel Economy This display shows the approximate average liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) recorded since the last time this menu item was reset. This number reflects only the

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (22,1)

5-22

Instruments and Controls

approximate average fuel economy that the vehicle has right now, and will change as driving conditions change. The fuel economy can be reset by pressing SET/CLR while the Average Fuel Economy display is showing. The display may not reset to zero.

Best Average Fuel Economy The right hand side displays the best average fuel economy (AFE) that is achieved for a selected distance. The left hand side displays a running average of fuel economy for the most recently traveled selected distance. The center of the Best AFE menu includes a digital readout and bar graph to show the instantaneous fuel economy. Quickly press the SET/CLR button to display a page for selecting one of the distance options. Move the up/down arrow to choose the selection, and SET/CLR to change the setting.

When viewing best AFE, a several second press and hold of SET/CLR will reset the best value. The best value will show “- - -” until the selected distance has been traveled. The display provides feedback on how current driving behavior in the bar graph affects the running average in the left display and how well recent driving compares to the best that has been achieved.

Average Vehicle Speed This display shows the average speed of the vehicle in kilometers per hour (km/h) or miles per hour (mph). This average is calculated based on the various vehicle speeds recorded since the last reset of this value. The average speed can be reset by pressing SET/CLR while the Average Vehicle Speed display is showing.

Timer This display can be used as a timer. To start the timer, press SET/CLR while Timer is displayed. The display will show the amount of time that has passed since the timer was last reset, not including time the ignition is off. Time will continue to be counted as long as the ignition is on, even if another display is being shown on the DIC. The timer will record up to 99 hours, 59 minutes and 59 seconds (99:59:59) after which the display will return to zero. To stop the timer, press SET/CLR briefly while Timer is displayed. To reset the timer to zero, press and hold SET/CLR.

Navigation This display is used for the OnStar or Navigation System Turn-by-Turn guidance, if equipped. See OnStar Overview on page 14-1 or the infotainment manual, if equipped.

Blank Display This display shows no information.

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (23,1)

Vehicle Information Menu Items Press the MENU button until Vehicle Information Menu is displayed. Then press R to scroll through the following menu items: . Unit

Tire Pressure

. Remaining Oil Life . Blank Display

Unit Press SET/CLR to enter the unit menu. Then press Q or R to switch between METRIC or US when the Unit display is active. Press SET/ CLR to confirm the setting. This will change the displays on the cluster and DIC to either metric or English (US) measurements.

Instruments and Controls

5-23

Tire Pressure The display will show a vehicle with the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or in pounds per square inch (psi). See Tire Pressure Monitor System on page 10-46 and Tire Pressure Monitor Operation on page 10-47.

Remaining Oil Life This display shows an estimate of the oil's remaining useful life. If REMAINING OIL LIFE 99% is displayed, that means 99% of the current oil life remains. When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. See Engine Oil Messages on page 5-26. The oil should be changed as soon as possible. See Engine Oil on page 10-8. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended in the

Maintenance Schedule in this manual. See Maintenance Schedule on page 11-2. Remember, the Oil Life display must be reset after each oil change. It will not reset itself. Also, be careful not to reset the Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the engine oil life system, press SET/ CLR while the Oil Life display is active. The display will ask for confirmation of a reset. Press Q or R to select Yes or No. Then press SET/CLR to confirm the selection. See Engine Oil Life System on page 10-11.

Blank Display This display shows no information. Compass The vehicle may have a compass in the Driver Information Center (DIC). See Compass on page 5-4.

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (24,1)

5-24

Instruments and Controls

Vehicle Messages Messages are displayed on the DIC to notify the driver that the status of the vehicle has changed and that some action may be needed by the driver to correct the condition. Multiple messages may appear one after another. Some messages may not require immediate action, but you can press SET/CLR to acknowledge that you received the messages and to clear them from the display. Some messages cannot be cleared from the DIC display because they are more urgent. These messages require action before they can be cleared. You should take any messages that appear on the display seriously and remember that clearing the messages will only make the messages disappear, not correct the problem. You will find the possible messages that can be displayed and some information about them grouped by subject in the following information.

Battery Voltage and Charging Messages

BATTERY SAVER ACTIVE This message displays when the vehicle has detected that the battery voltage is dropping beyond a reasonable point. The battery saver system starts reducing features of the vehicle that may be noticed. At the point that features are disabled, this message displays. Turn off unnecessary accessories to allow the battery to recharge. LOW BATTERY This message is displayed when the battery voltage is low. See Battery on page 10-23. SERVICE BATTERY CHARGING SYSTEM This message is displayed when there is a fault in the battery charging system. Take the vehicle to your dealer for service.

Brake System Messages

BRAKE FLUID LOW This message is displayed when the brake fluid level is low; see Brake Fluid on page 10-22. RELEASE PARKING BRAKE This message is displayed as a reminder that the parking brake is on. Release it before you attempt to drive.

Compass Messages

CAL This message is displayed when the compass needs to be calibrated. See Compass on page 5-4. – – Dashes will be displayed if the compass needs service. See your dealer for service.

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (25,1)

Cruise Control Messages

APPLY BRAKE BEFORE CRUISE If this message displays when attempting to activate cruise control, apply the brake pedal and try again. CRUISE SET TO XXX This message displays when the cruise control is set and shows the speed it was set to. See Cruise Control on page 9-34.

Door Ajar Messages

DOOR OPEN A door open symbol will be displayed on the DIC showing which door is open. If the vehicle has been shifted out of P (Park), a DOOR OPEN message will also be displayed. Close the door completely.

Instruments and Controls

5-25

MANUALLY CLOSE THE POWER LIFTGATE This message will display if the power liftgate encounters multiple obstacles on the same power cycle. After removing the obstructions, the liftgate will resume normal power operation. REAR ACCESS OPEN This message will display along with a symbol when the liftgate is open. Close the liftgate completely.

Engine Cooling System Messages

A/C OFF DUE TO HIGH ENGINE TEMP This message displays when the engine coolant becomes hotter than the normal operating temperature. To avoid added strain on a hot engine, the air conditioning compressor automatically turns off. When the coolant temperature returns to normal, the air

conditioning compressor turns back on. The vehicle can continue to be driven. If this message continues to appear, have the system repaired by your dealer as soon as possible to avoid damage to the engine. COOLANT LEVEL LOW ADD COOLANT This message will display if the coolant is low. See Engine Coolant on page 10-15. ENGINE OVERHEATED — IDLE ENGINE This message displays when the engine coolant temperature is too hot. Stop and allow the vehicle to idle until it cools down. ENGINE OVERHEATED — STOP ENGINE This message displays and a continuous chime sounds if the engine cooling system reaches unsafe temperatures for operation. Stop and turn off the vehicle as

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (26,1)

5-26

Instruments and Controls

soon as it is safe to do so to avoid severe damage. This message clears when the engine has cooled to a safe operating temperature. HIGH COOLANT TEMPERATURE This message displays if the coolant temperature is hot. See Engine Overheating on page 10-18.

Engine Oil Messages

CHANGE ENGINE OIL SOON This message displays when the engine oil needs to be changed. When you change the engine oil, be sure to reset the oil life system. See Engine Oil Life System on page 10-11, Driver Information Center (DIC) on page 5-20, Engine Oil on page 10-8, and Maintenance Schedule on page 11-2.

ENGINE OIL HOT, IDLE ENGINE This message displays when the engine oil temperature is too hot. Stop and allow the vehicle to idle until it cools down. ENGINE OIL LOW — ADD OIL On some vehicles, this message displays when the engine oil level may be too low. Check the oil level before filling to the recommended level. If the oil is not low and this message remains on, take the vehicle to your dealer for service. See Engine Oil on page 10-8. OIL PRESSURE LOW — STOP ENGINE This message displays if low oil pressure levels occur. Stop the vehicle as soon as safely possible and do not operate it until the cause of the low oil pressure has been corrected. Check the oil as soon as possible and have the vehicle serviced by your dealer.

Engine Power Messages

ENGINE POWER IS REDUCED This message displays when the vehicle's engine power is reduced. Reduced engine power can affect the vehicle's ability to accelerate. If this message is on, but there is no reduction in performance, proceed to your destination. The performance may be reduced the next time the vehicle is driven. The vehicle may be driven at a reduced speed while this message is on, but maximum acceleration and speed may be reduced. Anytime this message stays on, the vehicle should be taken to your dealer for service as soon as possible.

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (27,1)

Fuel System Messages

ECO MODE ON On some models, this message displays when the Fuel Economy Mode has been turned on by pressing the eco button near the shift lever. See Fuel Economy Mode on page 9-29. FUEL LEVEL LOW This message displays when the vehicle is low on fuel. Refuel as soon as possible. TIGHTEN GAS CAP This message may display when the fuel cap is not on tight. Tighten the fuel cap.

Key and Lock Messages

REPLACE BATTERY IN REMOTE KEY This message displays when the battery in the Remote Keyless Entry (RKE) transmitter needs to be replaced.

Instruments and Controls

5-27

Object Detection System Messages

FORWARD COLLISION ALERT OFF If your vehicle has the Forward Collision Alert (FCA) system, this message may display if the FCA system cannot activate due to a temporary condition. See Forward Collision Alert (FCA) System on page 9-37. FRONT CAMERA BLOCKED, CLEAN WINDSHIELD This message displays when the Lane Departure Warning (LDW) and Forward Collision Alert (FCA) systems are disabled because the camera view is blocked and cannot operate properly. It may also activate during heavy rain or due to road spray. To clean the system, clean the outside of the windshield area in front of the LDW/FCA camera sensor.

LANE DEPARTURE SYSTEM UNAVAILABLE If your vehicle has the Lane Departure Warning (LDW) system, this message may display if the LDW system cannot activate due to a temporary condition. See Lane Departure Warning (LDW) on page 9-45 for more information. PARK ASSIST OFF This message displays when the park assist system has been turned off or when there is a temporary condition causing the system to be disabled. See Parking Assist on page 9-39. SERVICE SIDE DETECTION SYSTEM If this message appears, both SBZA displays will remain on indicating there is a problem with the SBZA system. If these displays remain on after continued driving, the system needs service. Take the vehicle to your dealer.

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (28,1)

5-28

Instruments and Controls

SERVICE FRONT CAMERA This message displays when the Lane Departure Warning (LDW) and Forward Collision Alert (FCA) systems are disabled and need service. See your dealer. SERVICE PARK ASSIST This message displays if there is a problem with the Rear Parking Assist (RPA) system. Do not use this system to help you park. See Parking Assist on page 9-39. SIDE BLIND ZONE ALERT SYSTEM OFF This message indicates that the driver has turned the system off. SIDE BLIND ZONE SYS. UNAVAILABLE This message indicates that the SBZA system is disabled because the sensor is blocked and cannot detect vehicles in the blind zone. The sensor may be blocked by mud, dirt, snow, ice, or slush. This message may also activate during

heavy rain or due to road spray. The vehicle does not need service. For cleaning, see Side Blind Zone Alert (SBZA) on page 9-40.

Ride Control System Messages

ALL WHEEL DRIVE OFF If your vehicle has the All-Wheel Drive (AWD) system, this message displays when there is a temporary condition making the AWD system unavailable. The vehicle will run in two-wheel drive. This could be caused by: . A compact spare tire on the

vehicle.

. AWD system overheat.

Loss of wheel or vehicle speed.

. Certain other vehicle electrical

conditions.

This message turns off when the compact spare tire is replaced by a full-size tire, the differential fluid cools or the above conditions are no

longer present and the warning message is reset. To reset the warning message manually, turn the ignition off and then back on again after 30 seconds. If the message stays on, see your dealer. SERVICE ALL WHEEL DRIVE This message displays if a problem occurs with the All-Wheel Drive (AWD) system. The vehicle will run in two-wheel drive. This could be caused by: . An electronics problem. . Worn out or overheated clutch

plates.

. Various electrical issues. If this message appears, stop as soon as possible and turn off the ignition for 30 seconds. Restart the vehicle and check for the message on the DIC display. If the message still displays or appears again when you begin driving, the system needs service. See your dealer right away.

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (29,1)

SERVICE TRACTION CONTROL This message displays when there is a problem with the Traction Control System (TCS). See Traction Control/Electronic Stability Control on page 9-32. SERVICE STABILITRAK This message displays if there is a problem with the StabiliTrak system. See Traction Control/Electronic Stability Control on page 9-32. STABILITRAK OFF This message displays when the StabiliTrak system is turned off. See Traction Control/Electronic Stability Control on page 9-32. TRACTION CONTROL OFF This message displays when the Traction Control System (TCS) is turned off. Adjust your driving accordingly.

Instruments and Controls

5-29

TRACTION CONTROL ON This message displays when the Traction Control System (TCS) is first turned on. See Traction Control/ Electronic Stability Control on page 9-32.

Airbag System Messages

SERVICE AIRBAG This message displays if there is a problem with the airbag system. Take the vehicle to your dealer for service.

Security Messages

THEFT ATTEMPTED This message displays if the vehicle detects a tamper condition.

Service Vehicle Messages

SERVICE POWER STEERING This message is displayed if there is a problem with the power steering system and a chime may sound. Take the vehicle to your dealer for service. SERVICE VEHICLE SOON This message is displayed if there is a problem with the vehicle. Take the vehicle to your dealer for service.

Tire Messages

SERVICE TIRE MONITOR SYSTEM This message displays if there is a problem with the Tire Pressure Monitor System (TPMS). See Tire Pressure Monitor Operation on page 10-47.

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (30,1)

5-30

Instruments and Controls

TIRE LEARNING ACTIVE This message displays when the system is learning new tires. See Tire Pressure Monitor Operation on page 10-47. TIRE LOW ADD AIR TO TIRE This message displays when the pressure in one or more of the tires is low. This message also displays LEFT FRONT, RIGHT FRONT, LEFT REAR, or RIGHT REAR to indicate the location of the low tire. The low tire pressure warning light will also come on. See Tire Pressure Light on page 5-17. If a tire pressure message appears on the DIC, stop as soon as you can. Inflate the tires by adding air until the tire pressure is equal to the values shown on the Tire and Loading Information label. See Tires on page 10-38, Vehicle Load Limits on page 9-14, and Tire Pressure on page 10-45.

You can receive more than one tire pressure message at a time. The DIC also shows the tire pressure values. See Driver Information Center (DIC) on page 5-20.

Transmission Messages

SERVICE TRANSMISSION This message displays if there is a problem with the transmission. See your dealer. SHIFT TO PARK This message displays when the transmission needs to be shifted to P (Park). This may appear when attempting to remove the key from the ignition or from the vehicle if the vehicle is not in P (Park). TRANSMISSION HOT — IDLE ENGINE This message displays and a chime sounds if the transmission fluid in the vehicle gets hot. Driving with the transmission fluid temperature high can cause damage to the vehicle.

Stop the vehicle and let it idle to allow the transmission to cool. This message clears when the fluid temperature reaches a safe level.

Vehicle Reminder Messages

ICE POSSIBLE DRIVE WITH CARE This message is displayed when ice conditions are possible. TURN WIPER CONTROL TO INTERMITTENT FIRST This message is displayed when attempting to adjust the intermittent wiper speed without intermittent selected on the wiper control. See Windshield Wiper/Washer on page 5-2.

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (31,1)

Instruments and Controls

5-31

Vehicle Personalization Use the audio system controls to access the personalization menus for customizing vehicle features. The following are all possible personalization features. Depending on the vehicle, some may not be available.

Infotainment System Audio System Controls

Using the Faceplate MENU/SEL Knob . Press to enter, select, or activate

a highlighted menu option. Turn to highlight a menu option.

. Press to enable or disable a

system setting.

} BACK . Press to exit a menu. . Press to return to a previous

screen.

Using the Touch Screen Press a screen feature to: . View more feature options. . Enable or disable the feature. w : Press to scroll up. x : Press to scroll down. Back: Press to return to the previous menu. To access the personalization menu: 1. Press Config on the Home page

on the infotainment system display or CONFIG on the faceplate.

2. Select the desired feature to

display a list of available options.

3. Select the desired feature

setting.

Personalization Menus The following list of menu items may be available:

Languages

Time and Date . Radio Settings . Phone Settings . Navigation Settings . Display Settings . Vehicle Settings Each menu is detailed in the following information. Languages Select Languages, then select from the available language(s). Time and Date Manually set the time and date. See Clock on page 5-4. Radio Settings Select and the following may display: . Auto Volume . Gracenote Options . XM Channel Art . Max Startup Volume

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (32,1)

5-32

Instruments and Controls

. Number of Favorites Pages . XM Categories . Software Versions Menu

Auto Volume This feature adjusts the volume to minimize the effects of unwanted background noise that can result from changing road surfaces, driving speeds, or open windows. This feature works best at lower volume settings where background noise is typically louder than the sound system volume. Select Off, Low, Medium, or High.

Gracenote Options Select and the following may display: . Normalization

Normalization This feature improves voice recognition and media groupings. See “CD Player,” “USB,” “Auxiliary Devices,” and “Bluetooth Audio” in the infotainment manual.

Select to enable or disable.

XM Channel Art This feature turns the XM Audio page background on the XM Channel display on and off. Select to enable or disable.

Max Startup Volume This feature sets the maximum startup volume. If the vehicle is started and the volume is greater than this level, the volume is adjusted to this level. Press + or − to increase or decrease the volume.

Number of Favorites Pages Press to set the number of favorites to display. Select the desired number.

XM Categories This allows which available XM Categories are used and displayed. Press to enable or disable available categories.

Software Versions Menu Press to display information about the system and update software if available. Phone Settings Select and the following may display: . Bluetooth

Bluetooth Select and the following may display: . Device List . Pair Device

Device List Select to connect to a different phone source, disconnect a phone, or delete a phone.

Pair Device Select to pair a new device. See “Pairing a Phone/Device” in “Bluetooth” in the infotainment manual.

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (33,1)

Instruments and Controls

5-33

Navigation Settings See “Navigation Settings” in “Configure Menu” in the infotainment manual. Display Settings Press and the following may display: . Home Page Menu . Rear Camera Options . Display Off . Map Settings

Home Page Menu Select and the following may display: . Customize . Sort . Restore Home Page Defaults

Customize This feature allows the selection of what icons will be on the first Home Page.

Select and follow the screen prompts.

Sort This feature allows the icons on the Home Page to be moved. Select and follow the screen prompts.

Restore Home Page Defaults This feature will restore the Home Page to the factory settings. Select and follow the screen prompts.

Rear Camera Options Select and the following may display: . Symbols . Guide Lines

Symbols Select to turn the rear camera symbols on or off. See Rear Vision Camera (RVC) on page 9-42.

Guide Lines Select to turn the rear camera guide lines on or off. See Rear Vision Camera (RVC) on page 9-42.

Display Off Press to turn the display off. The display will return when any radio buttons are pressed or the screen is touched. Map Settings See “Map Settings” in “Configure Menu” in the infotainment manual. Vehicle Settings Select and the following may display: . Climate and Air Quality . Comfort and Convenience . Collision Detection Systems

Lighting

. Power Door Locks . Remote Lock/Unlock/Start . Return to Factory Settings?

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (34,1)

5-34

Instruments and Controls

Each of the menus is detailed in the following information. Climate and Air Quality Select and the following may display: . Auto Fan Speed . Air Conditioning Mode . Remote Start Auto Heat Seats . Auto Defog . Auto Rear Defog

Auto Fan Speed This selection is available on vehicles with the Automatic Climate Control System. Choose from the following blower speed settings: High: Low: Reduced speed. Normal: Moderate speed.

Increased speed.

Air Conditioning Mode This will allow you to select whether or not the air conditioning comes on automatically the next time the

vehicle is started. On means that the air conditioning will be on at start up, regardless of whether it was on or off the last time the vehicle was turned off. Off means the air conditioning will be off at the next start up, regardless of whether it was on or off the last time the vehicle was turned off. Last Setting means that when the vehicle is started, the air conditioning will resume whichever setting it was at the last time the vehicle was turned off. Select On, Off, or Last Setting.

Remote Start Auto Heat Seats When on, this feature will turn the heated seats on when using remote start on cold days. Select On or Off.

Auto Defog When turned on and high humidity is detected, the climate control system may adjust to outside air supply and turn on the air conditioner or the heater. The fan

speed may slightly increase to help prevent fogging. When high humidity is no longer detected, the system will return to its prior operation. Select On or Off.

Auto Rear Defog When on, this feature turns on the rear defogger at vehicle start when the interior temperature is cold and fog is likely. The auto rear defog function can be disabled by pressing 1. When off, the feature can be turned on by pressing 1. See “Rear Window Defogger” under Climate Control Systems on page 8-1 or Automatic Climate Control System on page 8-3. Select On or Off. Comfort and Convenience Select and the following may display: . Easy Exit Driver Seat . Chime Volume

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (35,1)

. Reverse Tilt Mirror . Memory Remote Recall

Easy Exit Driver Seat This feature moves the seat rearward allowing the driver more room to exit the vehicle. See “Easy Exit Driver Seat” under Memory Seats on page 3-6. Select On or Off.

Chime Volume This allows the selection of the chime volume level. Select Normal or High.

Reverse Tilt Mirror When on, both the driver and passenger mirrors will tilt downward when the vehicle is shifted to R (Reverse) to improve visibility of the ground near the rear wheels. They will return to their previous driving position when the vehicle is shifted out of R (Reverse), the ignition is turned to OFF, or the vehicle is left in R (Reverse). See Reverse Tilt Mirrors on page 2-16.

Instruments and Controls

5-35

Select On or Off.

Memory Remote Recall This feature automatically recalls the current driver’s previously stored 1 or 2 button positions when entering the vehicle. See "Recalling RKE Memory Positions (Memory Remote Recall)" under Memory Seats on page 3-6. Select On or Off. Collision Detection Systems Select and the following may display: . Park Assist . Side Blind Zone Alert . Rear Cross Traffic Alert

Park Assist This allows the Parking Assist feature to be turned on or off. Select On, Off, or On with Tow Bar Attached. See Parking Assist on page 9-39.

Side Blind Zone Alert This allows the Side Blind Zone Alert feature to be turned on or off. Select On or Off. See Side Blind Zone Alert (SBZA) on page 9-40.

Rear Cross Traffic Alert This allows the Rear Cross Traffic Alert feature to be turned on or off. Select On or Off. See Rear Vision Camera (RVC) on page 9-42. Lighting Select and the following may display: . Vehicle Locator Lights . Exit Lighting

Vehicle Locator Lights This allows the vehicle locator lights to be turned on or off. Select On or Off.

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (36,1)

5-36

Instruments and Controls

Exit Lighting This allows the selection of how long the exterior lamps stay on when leaving the vehicle when it is dark outside. Select Off, 30 Seconds, 1 Minute, or 2 Minutes. Power Door Locks Select and the following may display: . Auto Door Unlock . Delayed Door Lock

Auto Door Unlock This allows selection of which of the doors will automatically unlock when the vehicle is shifted into P (Park). Select All Doors, Driver Door, or Off.

Delayed Door Lock When on, this feature will delay the locking of the doors. To override the delay, press the power door lock on the instrument panel. Select On or Off. Remote Lock/Unlock/Start Select and the following may display: . Remote Unlock Light Feedback . Remote Lock Feedback . Remote Door Unlock

Remote Unlock Light Feedback When on, the exterior lamps will flash when unlocking the vehicle with the RKE transmitter. Select Flash Lights or Off.

Remote Lock Feedback This allows selection of what type of feedback is given when unlocking the vehicle with the RKE transmitter. Select Lights and Horn, Lights Only, Horn Only, or Off.

Remote Door Unlock This allows selection of which doors will unlock when pressing the unlock button on the RKE transmitter. Select All Doors or Driver Door. Return to Factory Settings? Select Return to Factory Settings to return all of the vehicle personalization to the default settings. Select Yes or On.

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (37,1)

Universal Remote System See Radio Frequency Statement on page 13-12.

Universal Remote System Programming

If equipped, these buttons are in the overhead console. This system can replace up to three remote control transmitters used to activate devices such as garage door openers, security systems, and home automation devices. These instructions refer to a garage door opener, but can be used for other devices.

Instruments and Controls

5-37

Do not use the Universal Remote system with any garage door opener that does not have the stop and reverse feature. This includes any garage door opener model manufactured before April 1, 1982. Read these instructions completely before programming the Universal Remote system. It may help to have another person assist with the programming process. Keep the original hand-held transmitter for use in other vehicles as well as for future programming. Erase the programming when vehicle ownership is terminated. See “Erasing Universal Remote System Buttons” later in this section. To program a garage door opener, park outside directly in line with and facing the garage door opener receiver. Clear all people and objects near the garage door.

Make sure the hand-held transmitter has a new battery for quick and accurate transmission of the radio-frequency signal. Programming the Universal Remote System For questions or help programming the Universal Remote system, call 1-800-355-3515 or see www.homelink.com. Programming involves time-sensitive actions, and may time out causing the procedure to be repeated. To program up to three devices: 1. Hold the end of the hand-held

transmitter about 3 to 8 cm (1 to 3 in) away from the Universal Remote system buttons with the indicator light in view. The hand-held transmitter was supplied by the manufacturer of the garage door opener receiver.

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (38,1)

5-38

Instruments and Controls

2. At the same time, press and

hold both the hand-held transmitter button and one of the three Universal Remote system buttons to be used to operate the garage door. Do not release either button until the indicator light changes from a slow to a rapid flash. Then release both buttons. Some garage door openers may require substitution of Step 2
with the procedure under “Radio Signals for Canada and Some Gate Operators” later in this section.

3. Press and hold the newly

programmed Universal Remote system button for five seconds while watching the indicator light and garage door activation.

If the indicator light stays on continuously or the garage door moves when the button is pressed, then

programming is complete. There is no need to complete Steps 4–6. If the indicator light does not come on or the garage door does not move, a second button press may be required. For a second time, press and hold the newly programmed button for five seconds. If the light stays on or the garage door moves, programming is complete. If the indicator light blinks rapidly for two seconds, then changes to a solid light and the garage door does not move, continue with programming Steps 4–6.

Learn or Smart Button 4. After completing Steps 1–3,

locate the Learn or Smart button inside garage on the garage door opener receiver. The name and color of the button may vary by manufacturer.

5. Press and release the Learn or

6.

Smart button. Step 6 must be completed within 30 seconds of pressing this button. Inside the vehicle, press and hold the newly programmed Universal Remote system button for two seconds and then release it. If the garage door does not move or the lamp on the garage door opener receiver

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (39,1)

Instruments and Controls

5-39

enough for the Universal Remote system to pick up the signal during programming. If the programming did not work, replace Step 2 under “Programming the Universal Remote System” with the following: Press and hold the Universal Remote system button while pressing and releasing the hand-held transmitter button every two seconds until the signal has been successfully accepted by the Universal Remote system. The Universal Remote system indicator light will flash slowly at first and then rapidly. Proceed with Step 3 under “Programming the Universal Remote System” to complete.

Universal Remote System Operation

Using the Universal Remote System Press and hold the appropriate Universal Remote system button for at least one-half second. The indicator light will come on while the signal is being transmitted. Erasing Universal Remote System Buttons Erase all programmed buttons when vehicle ownership is terminated. To erase: 1. Press and hold the two outside buttons until the indicator light begins to flash. This should take about 10 seconds.

2. Release both buttons.

does not flash, press and hold the same button a second time for two seconds, then release it. Again, if the door does not move or the garage door lamp does not flash, press and hold the same button a third time for two seconds, then release it.

The Universal Remote system should now activate the garage door. Repeat the process for programming the two remaining buttons. Radio Signals for Canada and Some Gate Operators For questions or programming help call 1-800-355-3515 or see www.homelink.com. Canadian radio-frequency laws and some U.S. gate operators require transmitter signals to time out or quit after several seconds of transmission. This may not be long

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (40,1)

5-40

Instruments and Controls

Reprogramming a Single Universal Remote System Button To reprogram any of the system buttons: 1. Press and hold any one of the

buttons. Do not release the button.

2. The indicator light will begin to flash after 20 seconds. Without releasing the button, proceed with Step 1 under “Programming the Universal Remote System.”

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-7707484) - 2015 - crc - 10/1/14

Black plate (1,1)

Lighting

Exterior Lighting

Exterior Lighting

Exterior Lamp Controls

Exterior Lamp Controls . . . . . . . . 6-1
Headlamp High/Low-Beam

Changer . . . . . . . . . . . . . . . . . . . . . 6-1
Flash-to-Pass . . . . . . . . . . . . . . . . . 6-2
Daytime Running

Lamps (DRL) . . . . . . . . . . . . . . . . 6-2

Automatic Headlamp

System . . . . . . . . . . . . . . . . . . . . . . 6-2
Hazard Warning Flashers . . . . . 6-3
Turn and Lane-Change

Signals . . . . . . . . . . . . . . . . . . . . . . 6-3
Fog Lamps . . . . . . . . . . . . . . . . . . . . 6-4

Interior Lighting

Instrument Panel Illumination

Control . . . . . . . . . . . . . . . . . . . . . . 6-4
Dome Lamps . . . . . . . . . . . . . . . . . 6-4
Reading Lamps . . . . . . . . . . . . . . . 6-5

Lighting Features

Entry Lighting . . . . . . . . . . . . . . . . . 6-5
Battery Load Management . . . . 6-5

The exterior lamp control is on the turn signal lever. There are four positions. O (Exterior Lamp Control): Operates the exterior lamps. Turn to one of the following positions: O (Off): Briefly turn to this position to turn the automatic light control off or on again. AUTO (Automatic Headlamps): Turns the exterior lamps on and off automatically depending on the exterior light. The vehicle will default to the AUTO setting when it is first