2016 GMC Acadia Owners Manual

1. Before starting this check, be

sure there is enough room around the vehicle.

2. Apply both the parking brake

and the regular brake. Do not use the accelerator pedal, and be ready to turn off the engine immediately if it starts.

3. Try to start the engine in each gear. The vehicle should start only in P (Park) or N (Neutral). If the vehicle starts in any other position, contact your dealer for service.

Automatic Transmission Shift Lock Control Function Check

{ Warning When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured.

1. Before starting this check, be

sure there is enough room around the vehicle. It should be parked on a level surface.

2. Apply the parking brake. Be

ready to apply the regular brake immediately if the vehicle begins to move.

3. With the engine off, turn the

ignition on, but do not start the engine. Without applying the regular brake, try to move the shift lever out of P (Park) with normal effort. If the shift lever moves out of P (Park), contact your dealer for service.

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

Ignition Transmission Lock Check While parked and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position. . The ignition should turn to

LOCK/OFF only when the shift lever is in P (Park).

. The ignition key should come

out only in LOCK/OFF.

Contact your dealer if service is required.

Park Brake and P (Park) Mechanism Check { Warning

When you are doing this check, the vehicle could begin to move. You or others could be injured and property could be damaged. Make sure there is room in front of the vehicle in case it begins to

(Continued)

Warning (Continued)

roll. Be ready to apply the regular brake at once should the vehicle begin to move.

Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the parking brake. . To check the parking brake's

holding ability: With the engine running and the transmission in N (Neutral), slowly remove foot pressure from the regular brake pedal. Do this until the vehicle is held by the parking brake only.

. To check the P (Park)

mechanism's holding ability: With the engine running, shift to P (Park). Then release the parking brake followed by the regular brake.

Contact your dealer if service is required.

Vehicle Care

263

Wiper Blade Replacement

Front Wiper Blade Windshield wiper blades should be inspected for wear or cracking. See Maintenance Schedule 0 322. Replacement blades come in different types and are removed in different ways. For the proper type and size, see Maintenance Replacement Parts 0 331. To replace the wiper blade assembly: 1. Pull the windshield wiper assembly away from the windshield.

2. Squeeze the tabs on each side

of the wiper blade assembly and slide the assembly off the end of the wiper arm.

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

264

Vehicle Care

The rear wiper blade will not lock in a vertical position so care should be used when pulling it away from the vehicle.

Windshield Replacement The windshield is part of the HUD system. If the vehicle has to have the windshield replaced, get one that is designed for HUD or the HUD image may look out of focus.

2. Push the release lever (2) to

disengage the hook and push the wiper arm (1) out of the blade assembly (3).

3. Push the new blade assembly securely in the wiper arm hook until the release lever clicks into place.

4. Return the wiper arm and blade assembly to the rest position on the glass.

3.

Install the new blade onto the arm connector and make sure the tabs are fully set in the locked position. Allowing the wiper blade arm to touch the windshield when no wiper blade is installed could damage the windshield. Any damage that occurs would not be covered by your warranty. Do not allow the wiper blade arm to touch the windshield.

4. Repeat the steps for the other

blade.

Rear Wiper Blade To replace the rear wiper blade: 1. Pull the wiper blade assembly

away from the backglass.

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

Headlamp Aiming Headlamp aim has been preset and should need no further adjustment. If the vehicle is damaged in a crash, the headlamp aim may be affected. If adjustment to the headlamps is necessary, see your dealer.

Bulb Replacement For the proper type of replacement bulbs, see Replacement Bulbs 0 266. For any bulb-changing procedure not listed in this section, contact your dealer.

Vehicle Care

265

LED Lighting This vehicle has several LED lamps. For replacement of any LED lighting assembly, contact your dealer.

License Plate Lamp To replace one of these bulbs: 1. Remove the two push pins holding each of the license plate lamps to the liftgate trim by unscrewing them.

2. Turn and pull the license plate

lamp forward through the liftgate trim opening. 3. Turn the bulb socket

counterclockwise and pull the bulb straight out of the socket. Install the new bulb.

4. 5. Reverse Steps 1–3 to reinstall

the license plate lamp.

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

266

Vehicle Care

Replacement Bulbs

Electrical System

Exterior Lamp

License Plate Lamp

Bulb

Number 194LL

For replacement bulbs not listed here, contact your dealer.

High Voltage Devices and Wiring

{ Warning

Exposure to high voltage can cause shock, burns, and even death. The high voltage components in the vehicle can only be serviced by technicians with special training. High voltage components are identified by labels. Do not remove, open, take apart, or modify these components. High voltage cable or wiring has orange covering. Do not probe, tamper with, cut, or modify high voltage cable or wiring.

Electrical System Overload The vehicle has fuses and circuit breakers to protect against an electrical system overload.

When the current electrical load is too heavy, the circuit breaker opens and closes, protecting the circuit until the current load returns to normal or the problem is fixed. This greatly reduces the chance of circuit overload and fire caused by electrical problems. Fuses and circuit breakers protect power devices in the vehicle. Replace a bad fuse with a new one of the identical size and rating. If there is a problem on the road and a fuse needs to be replaced, the same amperage fuse can be borrowed. Choose some feature of the vehicle that is not needed to use and replace it as soon as possible. Headlamp Wiring An electrical overload may cause the lamps to go on and off, or in some cases to remain off. Have the headlamp wiring checked right away if the lamps go on and off or remain off.

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

Look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Be sure you replace a bad fuse with a new one of the identical size and rating. Fuses of the same amperage can be temporarily borrowed from another fuse location, if a fuse goes out. Replace the fuse as soon as you can.

Engine Compartment Fuse Block The underhood fuse block is in the engine compartment, on the passenger side of the vehicle.

Vehicle Care

267

Lift the cover for access to the fuse/ relay block.

Caution

Spilling liquid on any electrical component on the vehicle may damage it. Always keep the covers on any electrical component.

To remove fuses, hold the end of the fuse between your thumb and index finger and pull straight out.

Windshield Wipers If the wiper motor overheats due to heavy snow or ice, the windshield wipers will stop until the motor cools and will then restart. Although the circuit is protected from electrical overload, overload due to heavy snow or ice may cause wiper linkage damage. Always clear ice and heavy snow from the windshield before using the windshield wipers. If the overload is caused by an electrical problem and not snow or ice, be sure to get it fixed.

Fuses and Circuit Breakers The wiring circuits in your vehicle are protected from short circuits by a combination of fuses, circuit breakers and fusible thermal links. This greatly reduces the chance of fires caused by electrical problems.

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

268

Vehicle Care

Acadia with HID Lighting

The vehicle may not be equipped with all of the fuses, relays, and features shown.

Fuses

Usage

A/C CLTCH Air Conditioning

ABS MTR

Clutch Antilock Brake System (ABS) Motor Adaptive Forward Lighting System Airbag System AUX POWER Auxiliary Power

AIRBAG

AFS

AUX

VAC PUMP

AWD

BATT 1
BATT 2
BATT 3
CIGAR

LIGHTER

ECM 1

Auxiliary Vacuum Pump All-Wheel-Drive System Battery 1
Battery 2
Battery 3
Cigarette Lighter

Engine Control Module 1

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

Usage

Fuses

Usage

Fuses

Usage

Vehicle Care

269

Fuses ECM/

FPM IGN

Engine Control Module/Fuel Pump Control Module Ignition

EMISSION 1 Emission 1
EMISSION 2 Emission 2
EVEN COILS Even Injector Coils

FAN 1
FAN 2

FPM

Cooling Fan 1
Cooling Fan 2
Trailer Brakes/ Headlamp Washer (China) Fuel Pump Power Module

FOG LAMP Fog Lamps (GMC)

HORN

HTD MIR

HTD

STR WHL HUMIDITY/

MAF

Horn Heated Outside Rearview Mirror Heated Steering Wheel Humidity Sensor/ MAF Sensor

HVAC BLWR Heating,

RT LO BEAM Right Low-Beam

Ventilation, and Air Conditioning Blower

LT HI BEAM Left High-Beam

Headlamp

LT LO BEAM Left Low-Beam

LT PRK LT TRLR STOP/TRN

Headlamp Left Parking Lamp Trailer Left Stoplamp and Turn Signal

ODD COILS Odd Injector Coils PWR L/GATE Power Liftgate

PWR

OUTLET RR APO

Power Outlet

Rear Accessory Power Outlet

RR DEFOG Rear Defogger RR HVAC

Rear Climate Control System

RT HI BEAM Right High-Beam

Headlamp

RT PRK

RT TRLR STOP/TRN

Headlamp Right Parking Lamp Trailer Right Stoplamp and Turn Signal

RVC SNSR Regulated Voltage

S/ROOF/

SUNSHADE

SERVICE SPARE STOP LAMPS (CHINA ONLY) STRTR

TCM

TRANS TRLR

BCK/UP

Control Sensor Sunroof

Service Repair Spare Stoplamps (China Only)

Starter Transmission Control Module Transmission Trailer Back-up Lamps

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

270

Vehicle Care

Fuses

Usage TRLR BRK Trailer Brake

TRLR

Trailer Parking Lamps

PRK LAMP TRLR PWR Trailer Power WPR/WSW Windshield Wiper/

Washer

Usage

Air Conditioning Compressor Clutch

Auxiliary Vacuum Pump Switched Power Cooling Fan 1
Cooling Fan 2
Cooling Fan 3

Relays

A/C

CMPRSR CLTCH

AUX

VAC PUMP

CRNK FAN 1
FAN 2
FAN 3

FOG LAMP Fog Lamps (GMC) HI BEAM

High-Beam Headlamps

Relays STOP LAMPS (CHINA ONLY) TRLR

BCK/UP

WPR

WPR HI

Usage Stop Lamps (China Only)

Trailer Back-up Lamps Windshield Wiper Windshield Wiper High Speed

Relays

HID/

LO BEAM

HORN

IGN

LT TRLR STOP/TRN

Usage High Intensity Discharge (HID) Low-Beam Headlamps Horn Ignition Main Trailer Left Stoplamp and Turn Signal Lamp

PRK LAMP Parking Lamp PWR/TRN RR DEFOG Rear Window

Powertrain

RT TRLR STOP/TRN

Defogger Trailer Right Stoplamp and Turn Signal Lamp

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

Acadia with Halogen Lighting

Vehicle Care

271

The vehicle may not be equipped with all of the fuses, relays, and features shown.

Fuses

Usage

A/C CLTCH Air Conditioning

ABS MTR

Clutch Antilock Brake System (ABS) Motor Airbag System AUX POWER Auxiliary Power

AIRBAG

AUX

VAC PUMP

AWD

BATT 1
BATT 2
BATT 3
CIGAR

LIGHTER

ECM 1

Auxiliary Vacuum Pump All-Wheel-Drive System Battery 1
Battery 2
Battery 3
Cigarette Lighter

Engine Control Module 1

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

272

Vehicle Care

Usage

Fuses

Usage

Fuses ECM/

FPM IGN

Engine Control Module/Fuel Pump Power Module Ignition

EMISSION 1 Emission 1
EMISSION 2 Emission 2
EVEN COILS Even Injector Coils

FAN 1
FAN 2
RT DRL

FPM

HORN

HTD MIR

HTD

STR WHL HUMIDITY/

MAF

Cooling Fan 1
Cooling Fan 2
Right Daytime Running Lamp Fuel Pump Power Module Horn Heated Outside Rearview Mirror Heated Steering Wheel Humidity Sensor/ MAF Sensor

HVAC BLWR Heating,

Ventilation, and Air Conditioning Blower

LT HI BEAM Left High-Beam

LT DRL

LT PRK LT TRLR STOP/TRN

Headlamp Left Daytime Running Lamp Left Parking Lamp Trailer Left Stoplamp and Turn Signal

ODD COILS Odd Injector Coils PWR L/GATE Power Liftgate

PWR

OUTLET RR APO

Power Outlet

Rear Accessory Power Outlet

RR DEFOG Rear Defogger RR HVAC

Rear Climate Control System RT HI BEAM Right Hi-Beam

Headlamp

Fuses RT PRK

RT TRLR STOP/TRN

Usage

Right Parking Lamp Trailer Right Stoplamp and Turn Signal

RVC SNSR Regulated Voltage

Control Sensor Sunroof

S/ROOF/

SUNSHADE

SERVICE SPARE

Service Repair Spare

FOG LAMPS Fog Lamps

STRTR

TCM

TRANS TRLR

BCK/UP

Starter Transmission Control Module Transmission Trailer Back-up Lamps

TRLR BRK Trailer Brake

TRLR

Trailer Parking Lamps

PRK LAMP TRLR PWR Trailer Power

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

Relays LT TRLR STOP/TRN

Usage

Trailer Left Stoplamp and Turn Signal Lamp

PRK LAMP Parking Lamp PWR/TRN RR DEFOG Rear Window

Powertrain

RT TRLR STOP/TRN

Defogger Trailer Right Stoplamp and Turn Signal Lamp

FOG LAMPS Fog Lamps

TRLR

BCK/UP

WPR

WPR HI

Trailer Back-up Lamps Windshield Wiper Windshield Wiper High Speed

Fuses

Usage

WPR/WSW Windshield Wiper/

Washer

Relays

A/C

CMPRSR CLTCH

AUX

VAC PUMP

CRNK FAN 1
FAN 2
FAN 3
RT DRL

HI BEAM

LT DRL

HORN

IGN

Usage

Air Conditioning Compressor Clutch

Auxiliary Vacuum Pump Switched Power Cooling Fan 1
Cooling Fan 2
Cooling Fan 3
Right Daytime Running Lamp High-Beam Headlamps Left Daytime Running Lamp Horn Ignition Main

Vehicle Care

273

Instrument Panel Fuse Block

The instrument panel fuse block is under the instrument panel on the passenger side of the vehicle. Pull down on the cover to access the fuse block.

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

274

Vehicle Care

The vehicle may not be equipped with all of the fuses, relays, and features shown.

Fuses

Usage

) )

) ) )

AIRBAG

AMP BCK

UP/STOP

BCM

CNSTR VENT CTSY DR LCK

GMC NON HID = Lo Beam GMC NON HID = High Shutter Chevy = Fog Lamps Buick China = Rear Fog Lamp Airbag Amplifier Back-up Lamp/ Stoplamp Body Control Module Canister Vent

Courtesy Lamps Door Locks

Fuses DRL/

LO BEAM

DSPLY

Usage

Daytime Running Lamps Relay/Low Beam Headlamps Relay Display

FRT WSW Front Windshield

HTD/

COOL SEAT

HVAC

INADV PWR INT LAMPS

INFOTMNT/

MSM

Washer Heated/Cooling Seats Heating, Ventilation, and Air Conditioning Inadvertent Power/ Interior Light Pipe Lamps Infotainment/ Memory Seat Module

LT TRN SIG Driver Side Turn

Signal

Fuse Side

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

Vehicle Care

275

Fuses OBS

DET/URS

PDM

Usage

Rear Park Assist/ Side Blind Zone Alert/Forward Collision Alert/ Universal Remote System Power Mirrors, Liftgate Release

PWR MODE Power Mode

PWR MIR

RDO

Power Mirrors Radio

REAR WPR Rear Wiper RT TRN SIG Passenger Side

STR WHL

ILLUM

Turn Signal Steering Wheel Illumination

USB CHRG USB Charging

Relay Side

Relays

LT/

PWR/SEAT

RT/

Usage

Driver Side Power Seat Relay Passenger Side Power Seat Relay

PWR/SEAT PWR/WNDW Power Windows

PWR/

COLUMN L/GATE

LCK

Relay Power Steering Column Relay Liftgate Relay Power Lock Relay

UNLCK

REAR/WSW Rear Window Washer Relay Power Unlock Relay Daytime Running Lamps Relay/ Low-Beam Headlamps Relay LT/UNLCK Driver Side Unlock

LO BEAM

DRL/

DRL/

LO BEAM

Relay Daytime Running Lamps Relay (If Equipped)

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

276

Vehicle Care

Relays

Usage

HI SHUTTER Hi Shutter (GMC

with Halogen Lighting)

FRT/WSW Front Windshield

Washer Relay

Wheels and Tires

Tires Every new GM vehicle has high-quality tires made by a leading tire manufacturer. See the warranty manual for information regarding the tire warranty and where to get service. For additional information refer to the tire manufacturer.

{ Warning

. Poorly maintained and

improperly used tires are dangerous.

. Overloading the tires can

cause overheating as a result of too much flexing. There could be a blowout and a serious crash. See Vehicle Load Limits 0 200.

(Continued)

Warning (Continued)

. Underinflated tires pose

the same danger as overloaded tires. The resulting crash could cause serious injury. Check all tires frequently to maintain the recommended pressure. Tire pressure should be checked when the tires are cold.

. Overinflated tires are more likely to be cut, punctured, or broken by a sudden impact — such as when hitting a pothole. Keep tires at the recommended pressure.

. Worn or old tires can cause a crash. If the tread is badly worn, replace them.

(Continued)

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

Warning (Continued)

. Replace any tires that

have been damaged by impacts with potholes, curbs, etc. Improperly repaired tires can cause a crash. Only the dealer or an authorized tire service center should repair, replace, dismount, and mount the tires.

. Do not spin the tires in

excess of 56 km/h (35 mph) on slippery surfaces such as snow, mud, ice, etc. Excessive spinning may cause the tires to explode.

All-Season Tires This vehicle may come with all-season tires. These tires are designed to provide good overall performance on most road surfaces

and weather conditions. Original equipment tires designed to GM's specific tire performance criteria have a TPC specification code molded onto the sidewall. Original equipment all-season tires can be identified by the last two characters of this TPC code, which will be “MS.” Consider installing winter tires on the vehicle if frequent driving on snow or ice-covered roads is expected. All-season tires provide adequate performance for most winter driving conditions, but they may not offer the same level of traction or performance as winter tires on snow or ice-covered roads. See Winter Tires 0 277.

Winter Tires This vehicle was not originally equipped with winter tires. Winter tires are designed for increased traction on snow and ice-covered roads. Consider installing winter tires on the vehicle if frequent driving on ice or snow covered roads is expected. See your dealer

Vehicle Care

277

for details regarding winter tire availability and proper tire selection. Also, see Buying New Tires 0 291. With winter tires, there may be decreased dry road traction, increased road noise, and shorter tread life. After changing to winter tires, be alert for changes in vehicle handling and braking. If using winter tires: . Use tires of the same brand and

tread type on all four wheel positions.

. Use only radial ply tires of the

same size, load range, and speed rating as the original equipment tires.

Winter tires with the same speed rating as the original equipment tires may not be available for H, V, W, Y, and ZR speed rated tires. If winter tires with a lower speed rating are chosen, never exceed the tire's maximum speed capability.

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

278

Vehicle Care

Summer Tires This vehicle may come with high performance summer tires. These tires have a special tread and compound that are optimized for maximum dry and wet road performance. This special tread and compound will have decreased performance in cold climates, and on ice and snow. It is recommended that winter tires be installed on the vehicle if frequent driving at temperatures below approximately 5 °C (40 °F) or on ice or snow covered roads is expected. See Winter Tires 0 277.

Caution

High performance summer tires have rubber compounds that lose flexibility and may develop surface cracks in the tread area at temperatures below −7 °C (20 °F). Always store high performance summer tires indoors and at temperatures above −7 °C (20 °F) when not in

(Continued)

Caution (Continued)

use. If the tires have been subjected to −7 °C (20 °F) or less, let them warm up in a heated space to at least 5 °C (40 °F) for 24 hours or more before being installed or driving a vehicle on which they are installed. Do not apply heat or blow heated air directly on the tires. Always inspect tires before use. See Tire Inspection 0 288.

Tire Sidewall Labeling Useful information about a tire is molded into its sidewall. The examples show a typical passenger vehicle tire and a compact spare tire sidewall.

Passenger (P-Metric) Tire Example (1) Tire Size : The tire size is a combination of letters and numbers used to define a particular tire's width, height, aspect ratio, construction type, and service description. See the “Tire Size” illustration later in this section. (2) TPC Spec (Tire Performance Criteria Specification) : Original equipment tires designed to GM's specific tire performance criteria have a TPC specification code molded onto the sidewall.

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

Vehicle Care

279

GM's TPC specifications meet or exceed all federal safety guidelines. (3) DOT (Department of Transportation) : The Department of Transportation (DOT) code indicates that the tire is in compliance with the U.S. Department of Transportation Motor Vehicle Safety Standards. DOT Tire Date of Manufacture : The last four digits of the TIN indicate the tire manufactured date. The first two digits represent the week (01–52) and the last two digits, the year. For example, the third week of the year 2010 would have a four-digit DOT date of 0310. (4) Tire Identification Number (TIN) : The letters and numbers following the DOT (Department of Transportation) code are the Tire Identification Number (TIN). The TIN shows the

manufacturer and plant code, tire size, and date the tire was manufactured. The TIN is molded onto both sides of the tire, although only one side may have the date of manufacture. (5) Tire Ply Material : The type of cord and number of plies in the sidewall and under the tread. (6) Uniform Tire Quality Grading (UTQG) : Tire manufacturers are required to grade tires based on three performance factors: treadwear, traction, and temperature resistance. For more information see Uniform Tire Quality Grading 0 292. (7) Maximum Cold Inflation Load Limit : Maximum load that can be carried and the maximum pressure needed to support that load.

Compact Spare Tire Example (1) Tire Ply Material : The type of cord and number of plies in the sidewall and under the tread. (2) Temporary Use Only : The compact spare tire or temporary use tire should not be driven at speeds over 80 km/h (50 mph). The compact spare tire is for emergency use when a regular road tire has lost air and gone flat. If the vehicle has a compact spare tire, see Compact Spare Tire 0 304 and If a Tire Goes Flat 0 295.

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

280

Vehicle Care

(3) Tire Identification Number (TIN) : The letters and numbers following the DOT (Department of Transportation) code are the Tire Identification Number (TIN). The TIN shows the manufacturer and plant code, tire size, and date the tire was manufactured. The TIN is molded onto both sides of the tire, although only one side may have the date of manufacture. (4) Maximum Cold Inflation Load Limit : Maximum load that can be carried and the maximum pressure needed to support that load. (5) Tire Inflation : The temporary use tire or compact spare tire should be inflated to 420 kPa (60 psi). For more information on tire pressure and inflation see Tire Pressure 0 283.

(6) Tire Size : A combination of letters and numbers define a tire's width, height, aspect ratio, construction type, and service description. The letter T as the first character in the tire size means the tire is for temporary use only. (7) TPC Spec (Tire Performance Criteria Specification) : Original equipment tires designed to GM's specific tire performance criteria have a TPC specification code molded onto the sidewall. GM's TPC specifications meet or exceed all federal safety guidelines.

Tire Designations

Tire Size The following is an example of a typical passenger vehicle tire size.

(1) Passenger (P-Metric) Tire : The United States version of a metric tire sizing system. The letter P as the first character in the tire size means a passenger vehicle tire engineered to standards set by the U.S. Tire and Rim Association. (2) Tire Width : The three-digit number indicates the tire section width in millimeters from sidewall to sidewall. (3) Aspect Ratio : A two-digit number that indicates the tire height-to-width measurements. For example, if the tire size aspect ratio is 60, as shown in item 3 of the illustration, it would mean that the tire's sidewall is 60 percent as high as it is wide.

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

(4) Construction Code : A letter code is used to indicate the type of ply construction in the tire. The letter R means radial ply construction; the letter D means diagonal or bias ply construction; and the letter B means belted-bias ply construction. (5) Rim Diameter : Diameter of the wheel in inches. (6) Service Description : These characters represent the load index and speed rating of the tire. The load index represents the load carrying capacity a tire is certified to carry. The speed rating is the maximum speed a tire is certified to carry a load.

Tire Terminology and Definitions Air Pressure : The amount of air inside the tire pressing outward on each square inch of

the tire. Air pressure is expressed in kPa (kilopascal) or psi (pounds per square inch). Accessory Weight : The combined weight of optional accessories. Some examples of optional accessories are automatic transmission, power windows, power seats, and air conditioning. Aspect Ratio : The relationship of a tire's height to its width. Belt : A rubber coated layer of cords between the plies and the tread. Cords may be made from steel or other reinforcing materials. Bead : The tire bead contains steel wires wrapped by steel cords that hold the tire onto the rim. Bias Ply Tire : A pneumatic tire in which the plies are laid at alternate angles less than 90 degrees to the centerline of the tread.

Vehicle Care

281

Cold Tire Pressure : The amount of air pressure in a tire, measured in kPa (kilopascal) or psi (pounds per square inch) before a tire has built up heat from driving. See Tire Pressure 0 283. Curb Weight : The weight of a motor vehicle with standard and optional equipment including the maximum capacity of fuel, oil, and coolant, but without passengers and cargo. DOT Markings : A code molded into the sidewall of a tire signifying that the tire is in compliance with the U.S. Department of Transportation (DOT) Motor Vehicle Safety Standards. The DOT code includes the Tire Identification Number (TIN), an alphanumeric designator which can also identify the tire manufacturer, production plant, brand, and date of production.

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

282

Vehicle Care

GVWR : Gross Vehicle Weight Rating. See Vehicle Load Limits 0 200. GAWR FRT : Gross Axle Weight Rating for the front axle. See Vehicle Load Limits 0 200. GAWR RR : Gross Axle Weight Rating for the rear axle. See Vehicle Load Limits 0 200. Intended Outboard Sidewall : The side of an asymmetrical tire that must always face outward when mounted on a vehicle. Kilopascal (kPa) : The metric unit for air pressure. Light Truck (LT-Metric) Tire : A tire used on light duty trucks and some multipurpose passenger vehicles. Load Index : An assigned number ranging from 1 to 279
that corresponds to the load carrying capacity of a tire.

Maximum Inflation Pressure : The maximum air pressure to which a cold tire can be inflated. The maximum air pressure is molded onto the sidewall. Maximum Load Rating : The load rating for a tire at the maximum permissible inflation pressure for that tire. Maximum Loaded Vehicle Weight : The sum of curb weight, accessory weight, vehicle capacity weight, and production options weight. Normal Occupant Weight : The number of occupants a vehicle is designed to seat multiplied by 68 kg (150 lb). See Vehicle Load Limits 0 200. Occupant Distribution : Designated seating positions. Outward Facing Sidewall : The side of an asymmetrical tire that has a particular side that faces outward when mounted on a vehicle. The side of the tire that

contains a whitewall, bears white lettering, or bears manufacturer, brand, and/or model name molding that is higher or deeper than the same moldings on the other sidewall of the tire. Passenger (P-Metric) Tire : A tire used on passenger cars and some light duty trucks and multipurpose vehicles. Recommended Inflation Pressure : Vehicle manufacturer's recommended tire inflation pressure as shown on the tire placard. See Tire Pressure 0 283 and Vehicle Load Limits 0 200. Radial Ply Tire : A pneumatic tire in which the ply cords that extend to the beads are laid at 90 degrees to the centerline of the tread. Rim : A metal support for a tire and upon which the tire beads are seated.

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

Sidewall : The portion of a tire between the tread and the bead. Speed Rating : An alphanumeric code assigned to a tire indicating the maximum speed at which a tire can operate. Traction : The friction between the tire and the road surface. The amount of grip provided. Tread : The portion of a tire that comes into contact with the road. Treadwear Indicators : Narrow bands, sometimes called wear bars, that show across the tread of a tire when only 1.6 mm (1/ 16 in) of tread remains. See When It Is Time for New Tires 0 290. UTQGS (Uniform Tire Quality Grading Standards) : A tire information system that provides consumers with ratings for a tire's traction, temperature, and treadwear. Ratings are

determined by tire manufacturers using government testing procedures. The ratings are molded into the sidewall of the tire. See Uniform Tire Quality Grading 0 292. Vehicle Capacity Weight : The number of designated seating positions multiplied by 68 kg (150 lb) plus the rated cargo load. See Vehicle Load Limits 0 200. Vehicle Maximum Load on the Tire : Load on an individual tire due to curb weight, accessory weight, occupant weight, and cargo weight. Vehicle Placard : A label permanently attached to a vehicle showing the vehicle capacity weight and the original equipment tire size and recommended inflation pressure. See “Tire and Loading Information Label” under Vehicle Load Limits 0 200.

Vehicle Care

283

Tire Pressure Tires need the correct amount of air pressure to operate effectively.

Caution

Neither tire underinflation nor overinflation is good. Underinflated tires, or tires that do not have enough air, can result in:

. Tire overloading and

overheating which could lead to a blowout.

. Premature or irregular wear. . Poor handling. . Reduced fuel economy. Overinflated tires, or tires that have too much air, can result in:

. Unusual wear.

(Continued)

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

284

Vehicle Care

Caution (Continued)

. Poor handling. . Rough ride. . Needless damage from

road hazards.

The Tire and Loading Information label on the vehicle indicates the original equipment tires and the correct cold tire inflation pressures. The recommended pressure is the minimum air pressure needed to support the vehicle's maximum load carrying capacity. See Vehicle Load Limits 0 200. How the vehicle is loaded affects vehicle handling and ride comfort. Never load the vehicle with more weight than it was designed to carry.

When to Check Check the tires once a month or more. Do not forget the compact spare, if the vehicle has one. The cold compact spare tire pressure should be at 420 kPa (60 psi). See Compact Spare Tire 0 304.

How to Check Use a good quality pocket-type gauge to check tire pressure. Proper tire inflation cannot be determined by looking at the tire. Check the tire inflation pressure when the tires are cold, meaning the vehicle has not been driven for at least three hours or no more than 1.6 km (1 mi). Remove the valve cap from the tire valve stem. Press the tire gauge firmly onto the valve to get a pressure measurement. If the cold tire inflation pressure matches the recommended pressure on the Tire and Loading Information label, no

further adjustment is necessary. If the inflation pressure is low, add air until the recommended pressure is reached. If the inflation pressure is high, press on the metal stem in the center of the tire valve to release air. Recheck the tire pressure with the tire gauge. Put the valve caps back on the valve stems to keep out dirt and moisture and prevent leaks. Use only valve caps designed for the vehicle by GM. TPMS sensors could be damaged and would not be covered by the vehicle warranty.

Tire Pressure Monitor System The Tire Pressure Monitor System (TPMS) uses radio and sensor technology to check tire pressure levels. The TPMS sensors monitor the air pressure in your tires and transmit tire pressure readings to a receiver located in the vehicle.

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.) As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can

lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability. Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists.

Vehicle Care

285

When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly. See Tire Pressure Monitor Operation 0 286. See Radio Frequency Statement 0 348.

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

286

Vehicle Care

Tire Pressure Monitor Operation This vehicle may have a Tire Pressure Monitor System (TPMS). The TPMS is designed to warn the driver when a low tire pressure condition exists. TPMS sensors are mounted onto each tire and wheel assembly, excluding the spare tire and wheel assembly, if the vehicle has one. The TPMS sensors monitor the air pressure in the tires and transmits the tire pressure readings to a receiver located in the vehicle.

When a low tire pressure condition is detected, the TPMS illuminates the low tire pressure warning light located on the instrument cluster. If the warning light comes on, stop as soon as possible and inflate the tires to the recommended pressure

shown on the tire loading information label. See Vehicle Load Limits 0 200. A message to check the pressure in a specific tire displays in the Driver Information Center (DIC). The low tire pressure warning light and the DIC warning message come on at each ignition cycle until the tires are inflated to the correct inflation pressure. Using the DIC, tire pressure levels can be viewed. For additional information and details about the DIC operation and displays see Driver Information Center (DIC) 0 122 and Tire Messages 0 136. The low tire pressure warning light may come on in cool weather when the vehicle is first started, and then turn off as the vehicle is driven. This could be an early indicator that the air pressure is getting low and needs to be inflated to the proper pressure.

A Tire and Loading Information label shows the size of the original equipment tires and the correct inflation pressure for the tires when they are cold. See Vehicle Load Limits 0 200, for an example of the Tire and Loading Information label and its location. Also see Tire Pressure 0 283. The TPMS can warn about a low tire pressure condition but it does not replace normal tire maintenance. See Tire Inspection 0 288, Tire Rotation 0 289 and Tires 0 276.

Caution

Tire sealant materials are not all the same. A non-approved tire sealant could damage the TPMS sensors. TPMS sensor damage caused by using an incorrect tire sealant is not covered by the vehicle warranty. Always use only the GM approved tire sealant available through your dealer or included in the vehicle.

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

TPMS Malfunction Light and Message The TPMS will not function properly if one or more of the TPMS sensors are missing or inoperable. When the system detects a malfunction, the low tire warning light flashes for about one minute and then stays on for the remainder of the ignition cycle. A DIC warning message displays. The malfunction light and DIC warning message come on at each ignition cycle until the problem is corrected. Some of the conditions that can cause these to come on are: . One of the road tires has been

replaced with the spare tire, if your vehicle has one. The spare tire does not have a TPMS sensor. The malfunction light and DIC message should go off after the road tire is replaced and the sensor matching process is performed successfully. See "TPMS Sensor Matching Process" later in this section.

. The TPMS sensor matching process was not done or not completed successfully after rotating the tires. The malfunction light and the DIC message should go off after successfully completing the sensor matching process. See "TPMS Sensor Matching Process" later in this section.

. One or more TPMS sensors are

missing or damaged. The malfunction light and the DIC message should go off when the TPMS sensors are installed and the sensor matching process is performed successfully. See your dealer for service.

. Replacement tires or wheels do not match the original equipment tires or wheels. Tires and wheels other than those recommended could prevent the TPMS from functioning properly. See Buying New Tires 0 291.

Vehicle Care

287

. Operating electronic devices or being near facilities using radio wave frequencies similar to the TPMS could cause the TPMS sensors to malfunction.

If the TPMS is not functioning properly, it cannot detect or signal a low tire condition. See your dealer for service if the TPMS malfunction light and DIC message comes on and stays on. TPMS Sensor Matching Process Each TPMS sensor has a unique identification code. The identification code needs to be matched to a new tire/wheel position after rotating the tires or replacing one or more of the TPMS sensors. The TPMS sensor matching process should also be performed after replacing a spare tire with a road tire containing the TPMS sensor. The malfunction light and the DIC message should go off at the next ignition cycle. The sensors are matched to the tire/ wheel positions, using a TPMS relearn tool, in the following order: driver side front tire, passenger side

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

288

Vehicle Care

front tire, passenger side rear tire, and driver side rear. See your dealer for service or to purchase a relearn tool. A TPMS relearn tool can also be purchased. See Tire Pressure Monitor Sensor Activation Tool at www.gmtoolsandequipment.com or call 1-800-GM TOOLS (1-800-468-6657). There are two minutes to match the first tire/wheel position, and five minutes overall to match all four tire/wheel positions. If it takes longer, the matching process stops and must be restarted. The TPMS sensor matching process is outlined below: 1. Set the parking brake. 2. Turn the ignition to ON/RUN

with the engine off.

3. Press the Remote Keyless Entry (RKE) transmitter's Q and K buttons at the same time for approximately five seconds. The horn sounds twice to signal the receiver is in

relearn mode and TIRE LEARNING ACTIVE message displays on the DIC screen.

4. Start with the driver side

front tire.

5. Place the relearn tool against

the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor. A horn chirp confirms that the sensor identification code has been matched to this tire and wheel position.

6. Proceed to the passenger side

front tire, and repeat the procedure in Step 5.

7. Proceed to the passenger side

rear tire, and repeat the procedure in Step 5.

8. Proceed to the driver side rear tire, and repeat the procedure in Step 5. The horn sounds two times to indicate the sensor identification code has been matched to the driver side rear tire, and the TPMS sensor matching process is no longer

active. The TIRE LEARNING ACTIVE message on the DIC display screen goes off.

9. Turn the ignition to LOCK/OFF. 10. Set all four tires to the

recommended air pressure level as indicated on the Tire and Loading Information label. 11. Put the valve caps back on the

valve stems.

Tire Inspection We recommend that the tires, including the spare tire, if the vehicle has one, be inspected for signs of wear or damage at least once a month. Replace the tire if: . The indicators at three or

more places around the tire can be seen.

. There is cord or fabric

showing through the tire's rubber.

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

. The tread or sidewall is

cracked, cut, or snagged deep enough to show cord or fabric.

. The tire has a bump, bulge,

or split.

. The tire has a puncture, cut, or other damage that cannot be repaired well because of the size or location of the damage.

Tire Rotation Tires should be rotated every 12 000 km (7,500 mi). See Maintenance Schedule 0 322. Tires are rotated to achieve a uniform wear for all tires. The first rotation is the most important.

Anytime unusual wear is noticed, rotate the tires as soon as possible, check for proper tire inflation pressure, and check for damaged tires or wheels. If the unusual wear continues after the rotation, check the wheel alignment. See When It Is Time for New Tires 0 290 and Wheel Replacement 0 294.

Use this rotation pattern when rotating the tires. If the vehicle has a compact spare tire, do not include it in the tire rotation.

Vehicle Care

289

Adjust the front and rear tires to the recommended inflation pressure on the Tire and Loading Information label after the tires have been rotated. See Tire Pressure 0 283 and Vehicle Load Limits 0 200. Reset the Tire Pressure Monitor System. See Tire Pressure Monitor Operation 0 286. Check that all wheel nuts are properly tightened. See “Wheel Nut Torque” under Capacities and Specifications 0 336.

{ Warning

Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause an accident. When changing a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle. In an emergency, a cloth or a paper (Continued)

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-9159268) - 2016 - CRC - 4/16/15

290

Vehicle Care

Warning (Continued)

towel can be used; however, use a scraper or wire brush later to remove all rust or dirt.

Lightly coat the center of the wheel hub with wheel bearing grease after a wheel change or tire rotation to prevent corrosion or rust build-up. Do not get grease on the flat wheel mounting surface or on the wheel nuts or bolts. Check that the spare tire, if the vehicle has one, is stored properly. Push, pull, and then try to rotate or turn the tire. If it