Login- Download PDF Manual
-
308
Fusion (CC7) Canada/United States of America, enUSA
12345E75442E146026 Wheels and Tires
TECHNICAL SPECIFICATIONS Wheel Lug Nut Torque Specifications
WARNING
When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum or brake disc that contacts the wheel. Make sure that any fasteners that attach the rotor to the hub are secured so they do not interfere with the mounting surfaces of the wheel. Installing wheels without correct metal-to-metal contact at the wheel mounting surfaces can cause the wheel nuts to loosen and the wheel to come off while your vehicle is in motion, resulting in loss of control.
Bolt size M12 x 1.5
Ib-ft (Nm)* 100 (135)
*Torque specifications are for nut and bolt threads free of dirt and rust. Use only Ford recommended replacement fasteners. Retighten the lug nuts to the specified torque within 100 miles (160 kilometers) after any wheel disturbance (such as tire rotation, changing a flat tire, wheel removal).
309
Fusion (CC7) Canada/United States of America, enUSA
E178187 Wheels and Tires
Wheel pilot bore
Inspect the wheel pilot bore and mounting surface prior to installation. Remove any visible corrosion or loose particles.
310
Fusion (CC7) Canada/United States of America, enUSA
E145950 Capacities and Specifications
ENGINE SPECIFICATIONS
Engine
1.5L EcoBoost engine
2.0L EcoBoost engine
2.5L engine
92
122
152
Minimum 87 octane
Minimum 87 octane
Minimum 87 octane
10.0:1
9.3:1
9.7:1
Cubic inches Required fuel Compression
ratio
Spark plug gap
0.025-0.029 in. (0.65-
0.75 mm)
Drivebelt Routing (If Equipped) 1.5L engine
MOTORCRAFT PARTS
Component
1.5L EcoBoost Engine
Air filter element Oil filter Battery
BXT-90T5-500
BXT-90T5-5901
BAGM-48H6-7602
311
Fusion (CC7) Canada/United States of America, enUSA
0.027-0.031 in. (0.70-0.80 mm) 2.0L and 2.5L engines
0.049-0.053 in. (1.25-1.35 mm)
A. Long drivebelt is on first pulley groove
closest to engine
B. Short drivebelt is on second pulley
groove farthest from engine
2.5L Engine
2.0L EcoBoost
Engine FA-1912
FL-910SBXT-90T5-5901
BXT-90T5-500
BXT-90T5-5901
E167586E161383AB Capacities and Specifications
Component
1.5L EcoBoost Engine
2.0L EcoBoost
2.5L Engine
Engine SP-537
FP-71SP-539
SP-530
WW-2601 (driver side)
WW-2700 (passenger side)
Spark plugs Cabin air filter Windshield wiper blade 1This part is designed for vehicles with Intelligent Access. 2This part is designed for vehicles with Automatic-Start-Stop. We recommend Motorcraft replacement parts available at your Ford dealer or at fordparts.com for scheduled maintenance. These parts meet or exceed Ford Motor Company’s specifications and are engineered for your vehicle. Use of other parts may impact vehicle performance, emissions and durability. Your warranty may be void for any damage related to use of other parts. If a Motorcraft oil filter is not available, use an oil filter that meets industry performance specification SAE/USCAR-36. For spark plug replacement, contact an authorized dealer. Replace the spark plugs at the appropriate intervals. See Scheduled Maintenance (page 462).
312
Fusion (CC7) Canada/United States of America, enUSA
Capacities and Specifications
VEHICLE IDENTIFICATION NUMBER The vehicle identification number is located on the left-hand side of the instrument panel.
Make, vehicle line, series, body type Engine type Check digit Model year Assembly plant Production sequence number
VEHICLE CERTIFICATION LABEL
Please note that in the graphic, XXXX is representative of your vehicle identification number. The Vehicle Identification Number contains the following information:
World manufacturer identifier Brake system, Gross Vehicle Weight Rating, Restraint Devices and their locations
313
Fusion (CC7) Canada/United States of America, enUSA
The National Highway Traffic Safety Administration Regulations require that a Safety Compliance Certification Label be affixed to a vehicle and prescribe where the Safety Compliance Certification Label may be located. The Safety Compliance Certification Label shall be affixed to either the door hinge pillar, the door latch post, or the edge of the door near the door latch, next to the driver's seating position.
E142476E142477E167469 Capacities and Specifications
TRANSMISSION CODE DESIGNATION
The transmission code is on the Safety Compliance Certification Label. The following table shows the transmission code along with the transmission description.
Description
Six-speed automatic transmis- sion.
Code
TECHNICAL SPECIFICATIONS
WARNING
The air conditioning refrigerant system contains refrigerant R-134a under high pressure. Opening the air conditioning refrigerant system can cause personal injury. Have the air conditioning refrigerant system serviced only by qualified personnel.
Item
Capacity
Brake fluid 1
Between MIN and MAX on reservoir
Door latch, hood latch, trunk latch and seat tracks
Not applicable
Lock cylinder
Not applicable
Ford part name or
equivalent
Motorcraft DOT 4
Low Viscosity (LV) High Performance Motor Vehicle BrakeFluid
Multi-Purpose Grease Spray (lithium grease)
Motorcraft Penet- rating and Lock Lubricant (U.S.)
Ford part number / Ford specification PM-1-C / WSS-
M6C65-A2
Motorcraft XL-5
(aerosol) or CRC SL3151ESB / ESB-M1C93-B XL-1 (U.S.)
314
Fusion (CC7) Canada/United States of America, enUSA
E167814 Capacities and Specifications
Item
Capacity
Automatic trans- mission fluid 2, 3
Rear differential (All Wheel Drive)fluid
Power Transfer Unit (PTU) fluid (All Wheel Drive) 4
1.5L EcoBoost engine oil 5, 6, 7
9.0 qt (8.5 L)
1.22 qt (1.15 L)
11.83 fl oz (0.35 L)
4.3 qt (4.1 L)
2.0L EcoBoost engine oil 5, 6, 7
5.7 qt (5.4 L)
2.5L engine oil 5, 6, 7
5.71 qt (5.4 L)
Ford part name or
equivalent
Motorcraft Penet- rating fluid (Canada) Motorcraft MERCON
LV
Motorcraft SAE
80W-90 Premium Rear Axle Lubricant
Motorcraft SAE
75W-140 Synthetic Rear Axle Lubricant
Ford part number / Ford specification CXC-51-A (Canada)
XT-10-QLV MERCON
LV
XY-80W90-QL / WSP-M2C197-A
XY-75W140-QL / WSL-M2C192-A
Motorcraft SAE 5W-
20 Full Synthetic
Motor Oil or
Motorcraft SAE 5W-
20 Premium
Synthetic Blend
Motor Oil
Motorcraft SAE 5W-
30 Full Synthetic
Motor Oil or
Motorcraft SAE 5W-
30 Premium
Synthetic Blend
Motor Oil
Motorcraft SAE 5W-
20 Full Synthetic
Motor Oil or
Motorcraft SAE 5W-
20 Premium
Synthetic Blend
Motor Oil
XO-5W20-QFS or XO-5W20-QSP
(U.S.);
CXO-5W20-LFS12 or CXO-5W20-LSP12
(Canada) /
WSS-M2C945-A XO-5W30-QFS or XO-5W30-QSP
(U.S.);
CXO-5W30-LFS12 or CXO-5W30-LSP12
(Canada)
WSS-M2C946-A XO-5W20-QFS or XO-5W20-QSP
(U.S.);
CXO-5W20-LFS12 or CXO-5W20-LSP12
(Canada) /
WSS-M2C945-A VC-3DIL-B (U.S.);
CVC-3DIL-B (Canada) /
WSS-M97B44-D2
1.5L EcoBoost engine coolant 8
2.0L EcoBoost engine coolant 811.1 qt (10.5 L)
8.9 qt (8.4 L)
Motorcraft Orange Antifreeze/Coolant
Prediluted
315
Fusion (CC7) Canada/United States of America, enUSA
Capacities and Specifications
Item
Capacity
Ford part name or
equivalent
Ford part number / Ford specification
2.5L engine coolant 8
7.2 qt (6.8 L)
Windshield washer
fluid
Fill as required
Front-wheel drive
fuel tank
All-wheel drive fuel
tank
A/C refrigerant
2.5L Engine (except E100)
16.5 gal (62.5 L)
17.5 gal (66.2 L)
1.50 lb (0.68 kg)
Motorcraft Premium Windshield Washer Concentrate With Bitterant (U.S.) Premium Quality Windshield Washer
Fluid (Canada) Not applicable
ZC-32-B2 (U.S.) / WSB-M8B16-A2
CXC-37-(A, B, D, and
F) (Canada) / WSB-M8B16-A2
Not applicableMotorcraft R-134a
Refrigerant
YN-19 (U.S.) / WSH-M17B19-A
CYN-16-R (Canada)
WSH-M17B19-A YN-19 (U.S.) / WSH-M17B19-A
CYN-16-R (Canada)
WSH-M17B19-A
A/C refrigerant
1.5L, 2.0L and 2.5L (E100) Engines
1.23 lb (0.56 kg)
Motorcraft R-134a
Refrigerant
Motorcraft PAG
Refrigerant
Compressor Oil
YN-12-D /
A/C refrigerant compressor oil
5.2 fl oz (153.8 ml)
316
Fusion (CC7) Canada/United States of America, enUSA
Capacities and Specifications
Item
Capacity
Ford part name or
equivalent
Ford part number / Ford specification WSH-M1C231-A
1Ford recommends using Motorcraft (Ford) DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure. 2Approximate dry fill capacity. Actual amount may vary during fluid changes. 3Automatic transmissions that require Motorcraft MERCON LV transmission fluid should only use Motorcraft MERCON LV transmission fluid. Use of any fluid other than the recommended fluid may cause transmission damage. Change the automatic transmission fluid and filter at the correct service interval. See Scheduled Maintenance (page 462). 4See your authorized dealer for fluid level checking or filling. 5Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specifications. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API certification mark. 6Do not use oils labeled as API SN unless the label also displays the API certification mark. These oils do not meet the requirements of your vehicle's engine and emissions system. 7Do not use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty. 8Add the coolant type originally equipped in your vehicle.
317
Fusion (CC7) Canada/United States of America, enUSA
Audio System
GENERAL INFORMATION Radio Frequencies and Reception Factors
AM and FM frequencies are established by the Federal Communications Commission (FCC) and the Canadian Radio and Telecommunications Commission (CRTC). Those frequencies are: • AM: 530, 540-1700, 1710 kHz •
FM: 87.9-107.7, 107.9 MHz
Distance and strength
Terrain
Station overload
Radio Reception Factors
The further you travel from an AM or FM station, the weaker the signal and the weaker the reception. Hills, mountains, tall buildings, bridges, tunnels, freeway overpasses, parking garages, dense tree foliage and thunderstorms can interfere with the reception. When you pass a ground-based broadcast repeating tower, a stronger signal may overtake a weaker one and result in the audio system muting.
Do not expose discs to direct sunlight or heat sources for extended periods. MP3 Track and Folder Structure Audio systems capable of recognizing and playing MP3 individual tracks and folder structures work as follows: •
There are two different modes for MP3
disc playback: MP3 track mode (system default) and MP3 folder mode.• MP3 track mode ignores any folder
structure on the MP3 disc. The player numbers each MP3 track on the disc (noted by the .mp3 file extension) from T001 to a maximum of T255. The maximum number of playable MP3
files may be less depending on the structure of the CD and exact model of radio present.CD and CD Player Information Note: CD units play commercially pressed 4.75-inch (12 centimeter) audio compact discs only. Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in Ford CD players. Note: Do not insert CDs with homemade paper (adhesive) labels into the CD player as the label may peel and cause the CD to become jammed. You should use a permanent felt tip marker rather than adhesive labels on your homemade CDs. Ballpoint pens may damage CDs. Please contact an authorized dealer for further information. Note: Do not use any irregularly shaped discs or discs with a scratch protection film attached. Always handle discs by their edges only. Clean the disc with an approved CD cleaner only. Wipe it from the center of the disc toward the edge. Do not clean in a circular motion.
318
Fusion (CC7) Canada/United States of America, enUSA
Audio System
AUDIO UNIT - VEHICLES WITH: AM/FM/CD/SYNC/SATELLITE RADIO
WARNING
Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.
Note: Depending on your vehicle option package, your system may look different from what you see here. Note: Some features, such as Sirius satellite radio, may not be available in your location. Check with an authorized dealer.
• MP3 folder mode represents a folder
structure consisting of one level of folders. The CD player numbers all MP3
tracks on the disc (noted by the .mp3
file extension) and all folders containing MP3 files, from F001
(folder) T001 (track) to F253 T255. • Creating discs with only one level offolders helps with navigation through the disc files.
If you are burning your own MP3 discs, it is important to understand how the system reads the structures you create. While various files may be present, (files with extensions other than mp3), only files with the .mp3 extension are played; other files are ignored by the system. This enables you to use the same MP3 disc for a variety of tasks on your work computer, home computer and your in-vehicle system. In track mode, the system displays and plays the structure as if it were only one level deep (all .mp3 files play, regardless of being in a specific folder). In folder mode, the system only plays the .mp3 files in the current folder.
319
Fusion (CC7) Canada/United States of America, enUSA
E144488 Audio System
CD: Press this button to listen to a CD. Press the function buttons below the radio screen to select on-screen options of Repeat or Shuffle. SOUND: Press this button to access settings for Treble, Midrange, Bass, Fade and Balance. Use the up and down arrow buttons to select the various settings. When you make your selection, press the left and right arrow buttons to change the settings. Press OK to set or press MENU to exit. Sound settings can be set for each audio source independently. Display screen: Shows audio and SYNC information. Number block: In radio mode, store your favorite stations for later access. When tuned to any station, press and hold a preset button until sound returns. In CD mode, press a button to select a track. In phone mode, press the buttons to enter a phone number. Function buttons: Select different functions of the audio system depending on which mode you are in (such as Radio mode or CD mode). TUNE: Turn to search the frequency band in individual increments. Eject: Press this button to eject a CD. Seek: In radio mode, select a frequency band and press this button. The system stops at the first station up the band. Press and hold the button to move quickly to the next strong radio station or memory preset. In CD mode, press this button to select the next track. Press and hold the button to move quickly forward through the current track. End phone call: Press this button to end a phone call. Cursor arrows and OK: Use the up and down arrow buttons to select the various settings. When you make your selection, press the left and right arrow buttons to change the settings. Press OK to set or press MENU to exit. CD slot: Insert a CD. Pick-up or Make phone call: Press this button to either pick-up an incoming phone call or to make a phone call. Seek: In radio mode, select a frequency band and press this button. The system stops at the first station down the band. Press and hold the button to move quickly to the previous strong radio station or memory preset. In CD mode, press this button to select the previous track. Press and hold the button to move quickly backward through the current track. Play/Pause: Press to either play or pause a track when listening to a CD. VOL and Power: Press this button to turn the system off and on. Turn it to adjust the volume. PHONE: Press this button to access the phone features of the SYNC® system. See SYNC™ (page 333). MENU: Press this button to access different audio system features. See Menu Structure later in this section.
320
Fusion (CC7) Canada/United States of America, enUSA
Audio System
MEDIA: Press this button to access your auxiliary input jack or switch between devices you plug into the input jack or USB port. Clock: Press this button to access the clock setting. Use the center arrow controls to change the hours and minutes. You can also set the clock by pressing the MENU button and scrolling to Clock Settings. RADIO: Press this button to listen to the radio or change radio frequencies bands. Press the function buttons below the radio screen to select different radio functions. SIRIUS or MUTE: If your vehicle is equipped with Sirius satellite radio, press this button to listen to Sirius satellite radio. If your vehicle is not equipped with Sirius satellite radio, press the button to mute the playing media.
Note: The MyFord Touch system controls most of the audio features. See MyFord Touch™ (page 372).
AUDIO UNIT - VEHICLES WITH: PREMIUM AM/FM/CD
WARNING
Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.
321
Fusion (CC7) Canada/United States of America, enUSA
Audio System
VOL and Power: Press this button to turn the system off and on. Turn it to adjust the volume. CD slot: Insert a CD. TUNE: Once you select a frequency band, turn the control to find the desired station manually. Eject: Press this button to eject a CD. Seek and Fast Forward: In radio mode, select a frequency band and press this button. The system stops at the first station up the band. Press and hold the button to move quickly to the next strong radio station or memory preset. In CD mode, press this button to select the next track. Press and hold the button to move quickly forward through the current track. Seek and Reverse: In radio mode, select a frequency band and press this button. The system stops at the first station down the band. Press and hold the button to move quickly to the previous strong radio station or memory preset. In CD mode, press this button to select the previous track. Press and hold the button to move quickly backward through the current track.
322
Fusion (CC7) Canada/United States of America, enUSA
E144489 Audio System
Note: The MyFord Touch system controls most of the audio features. See MyFord Touch™ (page 372).
AUDIO UNIT - VEHICLES WITH: SONY AM/FM/CD WARNING
Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.
Power: Press this button to turn the system off and on. CD slot: Insert a CD. Eject: Press this button to eject a CD. TUNE + and TUNE -: Press these buttons to search the frequency bands in individual increments. SOUND: Press this button to access settings for Treble, Midrange, Bass, Fade and Balance.
323
Fusion (CC7) Canada/United States of America, enUSA
E144490 Audio System
VOL: Turn the control to adjust the volume. SOURCE: Press this button to access different audio modes such as AM, FM and A/V Input. Seek, Reverse and Fast Forward: In radio mode, select a frequency band and press one of these buttons. The system stops at the first station it finds in that direction. Press and hold one of these buttons to move quickly in that direction to the next strong radio station or memory preset. In CD mode, press one of these buttons to select the previous or next track. Press and hold one of these buttons to move quickly in that direction within the current track.
Menu Structure Note: Depending on your system, some options may appear slightly different. Press MENU.
Press the up and down arrow buttons to scroll through the options. Press the right arrow to enter a menu. Press the left arrow to exit a menu. Press OK to confirm a selection.
Manual tune
Scan AST
PTY/Set Category
RBDS/RDS
Radio
Use the left and right arrows to go up or down the frequency band. Select for a brief sampling of all available channels. Select to store the six strongest local stations on the AM- AST and FM-AST frequency bands. Select to have the system search by certain music categories (such as Rock, Pop or Country). Select to view additional broadcast data, if available. This feature defaults to off. RBDS must be on for you to set a category.
324
Fusion (CC7) Canada/United States of America, enUSA
Audio System
SIRIUS
Select for a brief sampling of all available channels. Select to view your satellite radio electronic serial number (ESN). You will need this number when communicating with Sirius to activate, modify or track your account. Select to view available satellite radio channels. Press OK to open a list of the following options for this channel: Tune Channel, Skip Channel or Lock Channel. Once you skip or lock a channel, you can only access it by pressing Direct and entering the channel number. Locking or unlocking a channel requires your PIN. Select to view channel categories (such as Pop, Rock or News). If you select a category, seek and scan functions only stop on channels in that category. Select to turn off or turn on alerts for songs, artists or teams. The system alerts you when the selection is playing on another channel. Save up to 20 alerts. Use your PIN to unlock previously locked stations. Use to restore any channels you previously skipped. Select to create a PIN, which allows you to lock or unlock channels. Your initial PIN is 1234.
Audio Settings
Automatically adjusts the volume to compensate for speed and wind noise. You can set the system between 0 and +7. Select to adjust settings for Treble, Midrange, Bass, Fade and Balance. Select to optimize sound quality for the chosen seating position. Select to view additional broadcast data, if available. This feature defaults to off. RBDS must be on for you to set a category. Choose between STEREO SURROUND mode and STEREO mode.
Scan Show ESN
Channel Guide
Set Category
Alerts
Unlock All Stations Skip No stations Parental Lock (PIN)
Speed Compensated Volume
Sound
Occupancy Mode
RBDS/RDS Text
DSP
325
Fusion (CC7) Canada/United States of America, enUSA
Audio System
CD Settings
Select to scan all disc selections. Select to scan all music in the current MP3 folder. Select to bring soft and loud passages together for a more consistent listening level.
Clock Settings Select to set the time. Select to set the calendar date. Select to view clock time in a 12-hour mode or 24-hour mode.
Display Settings
Select to change display brightness. Select to display the language in English, French or Spanish. Select to display the outside temperature in Fahrenheit or Celsius.
Scan All Scan Folder CD Compression
Set Time Set Date 24h Mode
Dimming Language
Temp. setting
DIGITAL RADIO Note: HD Radio broadcasts are not available in all markets. HD Radio technology is the digital evolution of analog AM/FM radio. Your system has a special receiver that allows it to receive digital broadcasts (where available) in addition to the analog broadcasts, it already receives. Digital broadcasts provide a better sound quality
than analog broadcasts with free, crystal-clear audio and no static or distortion. For more information, and a guide to available stations and programming, please visit www.hdradio.com. When HD Radio is on and you tune to a station broadcasting HD Radio technology, you may notice the HD Radio logo on your screen. When this logo is available, you may also see Title and Artist fields on-screen.
326
Fusion (CC7) Canada/United States of America, enUSA
Audio System
The multicast indicator appears in FM mode (only) if the current station is broadcasting multiple digital broadcasts. The highlighted numbers signify available digital channels where new or different content is available. HD1 signifies the main programming status and is available in analog and digital broadcasts. Other multicast stations (HD2 through HD7) are only available digitally.
When HD Radio broadcasts are active, you can access the following functions: • Scan allows you to hear a brief
sampling of all available stations. This feature still works when HD Radio reception is on, although it does not scan for HD2-HD7 channels. You may see the HD logo appear if the station has a digital broadcast.
• Memory presets allow you to save an active channel as a memory preset. Touch and hold a memory preset slot until the sound returns. There is a brief mute while the radio saves the station. Sound returns when finished. When switching to an HD2 or HD3 memory preset, the sound mutes before the digital audio plays, because the system has to reacquire the digital signal.
Note: As with any saved radio station, you cannot access the saved station if your vehicle is outside the station’s reception area.
HD Radio Reception and Station Troubleshooting
Reception area
Station blending
Potential reception issues If you are listening to a multicast station and you are on the fringe of the reception area, the station may mute due to weak signal strength. If you are listening to HD1, the system switches back to the analog broadcast until the digital broadcast is available again. However, if you are listening to any of the possible HD2-HD7 multicast channels, the station mutes and stays muted unless it is able to connect to the digital signal again. When the system first receives a station (aside from HD2- HD7 multicast stations), it first plays the station in the analog version. Once the receiver verifies the station is an HD Radio station, it shifts to the digital version. Depending on the station quality, you may hear a slight sound change when the station changes from analog to digital. Blending is the shift from analog to digital sound or digital back to analog sound.
327
Fusion (CC7) Canada/United States of America, enUSA
Audio System
In order to provide the best possible experience, use the contact form to report any station issues found while listening to a station broadcasting with HD Radio
technology. Independent entities own and operate each station. These stations are responsible for ensuring all audio streams and data fields are accurate.
Potential station issues
Issues
Cause
Action
This is poor time alignment by the radio broadcaster.
No action required. This is a broadcast issue.
Echo, stutter, skip or repeat in audio. Increase or decrease in audio volume. Sound fading or blending in and out.
There is an audio mute delay when selecting HD2 or HD3, multicast preset or Direct Tune.
Cannot access HD2 or HD3
multicast channel when recalling a preset or from a direct tune. Text information does not match currently playing audio.There is no text information shown for currently selected frequency.
The radio is shifting between analog and digital audio.
The digital multicast is not available until the HD Radio broadcast is decoded. Once decoded, the audio is avail- able. The previously stored multicast preset or direct tune is not available in your current reception area. Data service issue by the radio broadcaster.
Data service issue by the radio broadcaster.
No action required. The reception issue may clear up as you continue to drive. No action required. This is normal behavior. Wait until the audio is available.
No action required. The station is not available in your current location.
Fill out the station issue form at website listed below.* Fill out the station issue form at website listed below.* No action required. This is normal behavior.
HD2-HD7 stations not found when Scan is pressed. * http://www.ibiquity.com/automotive/report_radio_station_experiences
Pressing Scan disables HD2-HD7 channel search.
328
Fusion (CC7) Canada/United States of America, enUSA
Audio System
HD Radio Technology manufactured under license from iBiquity Digital Corp. U.S. and foreign patents. HD Radio and the HD and HD Radio logos are proprietary trademarks of iBiquity Digital Corp. Ford Motor Company and iBiquity Digital Corp. are not responsible for the content sent using HD Radio technology. Content may be changed, added or deleted at any time at the station owner's discretion.
SATELLITE RADIO (If Equipped) SIRIUS® broadcasts a variety of music, news, sports, weather, traffic and entertainment satellite radio channels. For more information and a complete list of SIRIUS satellite radio channels, visit www.siriusxm.com in the United States, www.sirius.ca in Canada, or call SIRIUS at 1-888-539-7474. Note: This receiver includes the eCos real-time operating system. eCos is published under the eCos License.
Satellite Radio Reception Factors
Potential satellite radio reception issues
Antenna obstructions
Terrain
Station overload
Satellite radio signal interfer- ence
For optimal reception performance, keep the antenna clear of snow and ice build-up and keep luggage and other material as far away from the antenna as possible. Hills, mountains, tall buildings, bridges, tunnels, freeway overpasses, parking garages, dense tree foliage and thunderstorms can interfere with your reception. When you pass a ground-based broadcast-repeating tower, a stronger signal may overtake a weaker one and the audio system may mute. Your display may show ACQUIRING . . . to indicate the interference and the audio system may mute.
SIRIUS® Satellite Radio Service Note: SIRIUS reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes.
329
Fusion (CC7) Canada/United States of America, enUSA
E142593 Audio System
SIRIUS satellite radio is a subscription-based satellite radio service that broadcasts a variety of music, sports, news, weather, traffic and entertainment programming. Your factory-installed SIRIUS satellite radio system includes hardware and a limited subscription term, which begins on the date of sale or lease of your vehicle. See an authorized dealer for availability.
For more information on extended subscription terms (a service fee is required), the online media player and a complete list of SIRIUS satellite radio channels, and other features, please visit www.siriusxm.com in the United States, www.sirius.ca in Canada, or call SIRIUS at 1-888-539-7474. Satellite Radio Electronic Serial Number (ESN) You need your ESN to activate, modify or track your satellite radio account. When in satellite radio mode, press Options.
Troubleshooting Message
Acquiring…
Satellite antenna fault SIRIUS system failure
Condition
Action
Radio requires more than two seconds to produce audio for the selected channel. There is an internal module or system failure present.
No action required. This message should disappear shortly.
If this message does not clear shortly, or with an igni- tion key cycle, your receiver may have a fault. See an authorized dealer for service. Tune to another channel or choose another preset. Contact SIRIUS at 1-888- 539-7474 to subscribe to the channel, or tune to another channel. The signal is blocked. When you move into an open area, the signal should return.
No action required. The process may take up to three minutes.
Invalid Channel
Unsubscribed Channel
The channel is no longer available. Your subscription does not include this channel.
No Signal
Updating…
The signal is lost from the SIRIUS satellite or SIRIUS tower to your vehicle antenna. Update of channel programming in progress.
330
Fusion (CC7) Canada/United States of America, enUSA
Audio System
Message
Questions? Call 1-888-539-7474
None found Check Channel Guide
Subscription Updated
Condition
Action
Your satellite service is no longer available.
All the channels in the selected category are either skipped or locked. SIRIUS has updated the channels available for your vehicle.
Contact SIRIUS at 1-888- 539-7474 to resolve subscription issues. Use the channel guide to turn off the Lock or Skip function on that station. No action required.
AUDIO INPUT JACK WARNINGS
Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.
For safety reasons, do not connect or adjust the settings on your portable music player while your
vehicle is moving.
Store the portable music player in a secure location, such as the center console or the glove box, when your
vehicle is moving. Hard objects may become projectiles in a collision or sudden stop, which may increase the risk of serious injury. The audio extension cable must be long enough to allow the portable music player to be safely stored while your vehicle is moving.
331
Fusion (CC7) Canada/United States of America, enUSA
The auxiliary input jack allows you to connect and play music from your portable music player through your vehicle speakers. You can use any portable music player designed for use with headphones. Your audio extension cable must have male 1/8th-inch (3.5 millimeter) connectors at each end. 1. Switch off the engine, radio and
portable music player. Set the parking brake and put the transmission in position P (vehicle with an automatic transmission) or neutral (vehicle with a manual transmission).
2. Plug the extension cable from the
portable music player into the auxiliary input jack.
3. Switch the radio on. Select either a
tuned FM station or a CD.
4. Adjust the volume as desired.
E149149 Audio System
5. Switch your portable music player on
and adjust its volume to half its maximum level.
6. Press AUX until LINE or LINE IN
appears in the display. You should hear music from your device even if it is low.
7. Adjust the volume on your portable
music player until it reaches the volume level of the FM station or CD. Do this by switching back and forth between the AUX and FM or CD controls.
USB PORT (If Equipped)
A/V inputs SD card slot USB ports
The USB port allows you to plug in media playing devices, memory sticks and charge devices (if supported). MEDIA HUB (If Equipped) The media hub is located in the center console and has the following features:
332
Fusion (CC7) Canada/United States of America, enUSA
E149148CBAE142605 SYNC™
GENERAL INFORMATION
SYNC is an in-vehicle communications system that works with your Bluetooth-enabled cellular phone and portable media player. This allows you to: • Make and receive calls. • Access and play music from your
portable music player.
• Use 911 Assist, Vehicle Health Report and SYNC Services (Traffic, Directions & Information).*
• Use applications, such as Pandora and
Stitcher, via SYNC AppLink.
• Access phonebook contacts and music
using voice commands. Stream music from your connected phone. Text message.
•
•
• Use the advanced voice recognition
system
• Charge your USB device (if your device
supports this).
*These features require activation. Make sure that you review your device's manual before using it with SYNC. Support The SYNC support team is available to help you with any questions you cannot answer on your own. Monday-Saturday, 8:30am-9:00pm EST. Sunday, 10:30am-7:30pm EST. In the United States, call 1-800-392-3673. In Canada, call 1-800-565-3673.
333
Fusion (CC7) Canada/United States of America, enUSA
E142598 SYNC™
When using SYNC: • Do not operate playing devices if the
power cords or cables are broken, split or damaged. Place cords and cables out of the way, so they do not interfere with the operation of pedals, seats, compartments or safe driving abilities.
• Do not leave playing devices in your
vehicle during extreme conditions as it could cause them damage. See your device's manual for further information. • Do not attempt to service or repair the
system. See an authorized dealer.
Privacy Information When a cellular phone is connected to SYNC, the system creates a profile within your vehicle that is linked to that cellular phone. This profile is created in order to offer you more cellular features and to operate more efficiently. Among other things, this profile may contain data about your cellular phone book, text messages (read and unread), and call history, including history of calls when your cellular phone was not connected to the system. In addition, if you connect a media device, the system creates and retains an index of supported media content. The system also records a short development log of approximately 10 minutes of all recent system activity. The log profile and other system data may be used to improve the system and help diagnose any problems that may occur. The cellular profile, media device index, and development log will remain in the vehicle unless you delete them and are generally accessible only in the vehicle when the cellular phone or media player is connected. If you no longer plan to use the system or the vehicle, we recommend you perform a Master Reset to erase all stored information.
Times are subject to change due to holidays. SYNC Owner Account Why do I need a SYNC owner account? • Required to activate Vehicle Health
Report and to view the reports online.
• Required to activate the
subscription-based SYNC Services and to personalize your Saved Points and Favorites. Essential for keeping up with the latest software downloads available for SYNC.
•
• Access to customer support for any
questions you may have.
Driving Restrictions For your safety, certain features are speed-dependent and restricted when your vehicle is traveling over 3 mph (5 km/h). Safety Information
WARNING
Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.
334
Fusion (CC7) Canada/United States of America, enUSA
SYNC™
System data cannot be accessed without special equipment and access to the vehicle's SYNC module. Ford Motor Company and Ford of Canada will not access the system data for any purpose other than as described absent consent, a court order, or where required by law enforcement, other government authorities, or other third parties acting with lawful authority. Other parties may seek to access the information independently of Ford Motor Company and Ford of Canada. For further privacy information, see the sections on 911 Assist, Vehicle Health Report, and Traffic, Directions and Information.
USING VOICE RECOGNITION This system helps you control many features using voice commands. This allows you to keep your hands on the wheel and focus on what is in front of you. Initiating a Voice Session
Push the voice icon. A tone sounds and Listening appears in the display. Say any of the
following:
Say
"Bluetooth audio" "Cancel" "Line in"
"Mobile apps" * "Phone"
"Services" * "SYNC" "USB"
"Vehicle health report" * "Voice settings" "Help"
If You Want To
Stream audio from your phone. Cancel the requested action. Access the device connected to the auxiliary input jack. Access mobile applications.
Make calls. Access the SYNC Services portal.
Return to the main menu. Access the device connected to your USB port. Run a vehicle health report.
Adjust the level of voice interaction and feedback. Hear a list of voice commands available in the current mode.
* This is an optional feature and available in the United States only.
335
Fusion (CC7) Canada/United States of America, enUSA
E142599 SYNC™
System Interaction and Feedback The system provides feedback through audible tones, prompts, questions and spoken confirmations depending on the situation and the chosen level of interaction (voice settings). You can customize the voice recognition system to provide more or less instruction and feedback.
The default setting is to a higher level of interaction in order to help you learn to use the system. You can change these settings at any time. Adjusting the Interaction Level
Push the voice icon. Say "Voice settings" when prompted, then any of the following:
When you say:
"Interaction mode standard"
"Interaction mode advanced"
The system:
Provides more detailed interaction and
guidance.
Provides less audible interaction and more
tone prompts.
The system defaults to the standard interaction mode.
Confirmation prompts are short questions the system asks when it is not sure of your request or when there are multiple possible responses to your request. For example, the system may ask "Phone, is that correct?". If turned off, the system simply makes a best guess as to what you requested and may ask you to confirm settings.
When you say:
"Confirmation prompts off"
"Confirmation prompts on"
The system creates candidate lists when it has the same confidence level of several options based on your voice command. When turned on, it may prompt you with as many as four possibilities for clarification.
The system:
Makes a best guess from the command; you may still occasionally be asked to
confirm settings.
Clarifies your voice command with a short
question.
For example, say "Say 1 after the tone to call John Doe at home. Say 2 after the tone to call Johnny Doe on mobile. Say 3 after the tone to call Jane Doe at home." You could also say "Say 1 after the tone to play John Doe, Say 2 after the tone to play Johnny Doe."
336
Fusion (CC7) Canada/United States of America, enUSA
E142599 When you say:
"Media candidate lists off"
"Media candidate lists on"
"Phone candidate lists off"
SYNC™
The system:
Makes a best guess from the media
candidate list. You may still occasionally
be asked questions.
Clarifies your voice command for media
candidates.
Makes a best guess from the phone
candidate list. You may still occasionally
be asked questions.
"Phone candidate lists on"
Clarifies your voice command for phone
candidates
USING SYNC™ WITH YOUR PHONE Hands-free calling is one of the main features of SYNC. While the system supports a variety of features, many are dependent on your cellular phone's functionality. At a minimum, most cellular phones with Bluetooth wireless technology support the following functions: • Answering an incoming call. • • Using privacy mode. • Dialing a number. • Redialing. • Call waiting notification. • Caller ID. Other features, such as text messaging using Bluetooth and automatic phonebook download, are phone-dependent features. To check your phone's compatibility, see your phone's manual and visit www.SYNCMyRide.com.
Ending a call.
Helpful Hints • Make sure the interior of your vehicle is as quiet as possible. Wind noise from open windows and road vibrations may prevent the system from correctly recognizing spoken commands.
• After pressing the voice icon, wait until
after the tone sounds and Listening appears before saying a command. Any command spoken before this does not register with the system. Speak naturally, without long pauses between words.
•
• At any time, you can interrupt the
system while it is speaking by pressing the voice icon.
337
Fusion (CC7) Canada/United States of America, enUSA
SYNC™
OK.
1. Press the phone button, and then scroll
to System Settings. Press OK.
2. Scroll to Bluetooth Devices. Press OK. 3. Scroll to Add Bluetooth Device. Press
4. When Find SYNC appears in the
display, press OK.
5. Put your phone into Bluetooth
discovery mode. See your phone's manual if necessary.
6. When prompted on your phone's
display, enter the six-digit PIN provided by SYNC in the radio display. The display indicates when the pairing is successful.
The system then prompts with questions, such as if you would like to set the current phone as the primary phone (the phone SYNC automatically tries to connect with first upon vehicle start-up) and download your phone book. Phone Voice Commands
"PHONE"
"Call
"1,2 "Call
at home"1,2 "Call
at work"1,2 "Call
in office"1,2 "Call
on mobile OR cell"1,2 "Call
on other"1,2 "Call history incoming"2
"Call history missed"2
"Call history outgoing"2
Pairing a Phone for the First Time Note: SYNC can support downloading up to approximately 1000 entries per Bluetooth-enabled cellular phone. Note: Make sure to switch on the ignition and the radio. Put the transmission in position P. Note: To scroll through the menus, press the up and down arrows on your audio system. Wirelessly pairing your phone with SYNC allows you to make and receive hands-free calls. 1. Press the phone button. When the display indicates there is no phone paired, press OK.
2. When Find SYNC appears in the
display, press OK.
3. Put your phone into Bluetooth
discovery mode. See your device's manual if necessary.
4. When prompted on your phone's
display, enter the six-digit PIN provided by SYNC in the radio display. The display indicates when the pairing is successful.
Depending on your phone's capability and your market, the system may prompt you with questions, such as setting the current phone as the primary phone (the phone SYNC automatically tries to connect with first upon vehicle start-up) and downloading your phonebook. Pairing Subsequent Phones Note: Make sure to switch on the ignition and the radio. Put the transmission in position P. Note: To scroll through the menus, press the up and down arrows on your audio system.
338
Fusion (CC7) Canada/United States of America, enUSA
SYNC™
"PHONE"
"Connections"2
"Dial"1,3
"Go to privacy"
"Hold" "Join"
"Menu"2,4
"Phone book
"2 "Phone book
at home"2 "Phone book
at office"2 "Phone book
at work" 2 "Phone book
on mobile OR cell"2
"Phone book
on other"2 1 These commands do not require you to say "Phone" first. 2 These commands are not available until phone information is completely downloaded using Bluetooth. 3 See Dial table below. 4 See Menu table below. Phone book commands: When you ask SYNC to access things such as a phonebook name or number, the requested information appears in the display to view. Press the phone button and say, "Call" to call the contact.
"DIAL"
"411 (four-one-one)", "911" (nine-one-
one)
"700" (seven hundred) "800" (eight hundred) "900" (nine hundred)
"Pound" (#)
"Number <0-9>"
"Asterisk" (*)
"Clear" (deletes all entered digits)
"Delete" (deletes one digit)
"Plus" "Star"
Note: To exit dial mode, press and hold the phone button or press MENU to go to the phone menu.
"MENU"
"(Phone) connections"
"(Phone) settings (message) notification
off"
"(Phone) settings (message) notification
on"
"(Phone) settings (set) phone ringer"
"(Phone) settings (set) ringer 1" "(Phone) settings (set) ringer 2" "(Phone) settings (set) ringer 3" "(Phone) settings (set) ringer off"
"Battery"
"Phone name"
339
Fusion (CC7) Canada/United States of America, enUSA
SYNC™
"MENU" "Signal"
"Text message inbox"
Words in ( ) are optional and do not have to be spoken for the system to understand the command. Making Calls Press the voice icon and when prompted say: 1. Say "Call
" or "Dial", then the desired number.
2. When the system confirms the number,
say, "Dial" again to initiate the call.
To erase the last spoken digit, say, "Delete" or press the left arrow button. To erase all spoken digits, say "Clear" or press and hold the left arrow button. To end the call, press and hold the phone button.
Receiving Calls When receiving a call, you can: • Answer the call by pressing the phone
button.
• Reject the call by pressing and holding
the phone button. Ignore the call by doing nothing.
• Phone Options during an Active Call During an active call, you have more menu features that become available, such as putting a call on hold or joining calls. Use the arrow buttons to scroll through the menu options. 1. Press MENU during an active call. 2. After selecting Active Call Menu, press
OK.
3. Scroll to cycle through the following
options:
When you select:
You can:
Mute Call? Privacy
Call Hold
Enter Tones
Join Calls
Mute the call. Switch a call from an active hands-free environment to your cellular phone for a more private conversation. Press OK when Privacy on/off appears. (The display indicates In Privacy and the system transfers your call.) Put an active call on hold. Press OK when Hold on/off appears. To answer another call at this time, press the phone button. Enter "tones", such as numbers for passwords. Scroll until the desired number appears in the display, then press OK; a tone sounds as confirmation. Repeat as necessary. Join two separate calls. (SYNC supports a maximum of three callers on a multiparty call or conference call.) 1. Press the phone button.
340
Fusion (CC7) Canada/United States of America, enUSA
SYNC™
When you select:
You can:
2. Access the desired contact through SYNC or use voice commands to place the second call. Once actively in the second call, press MENU. 3. Scroll to Join Calls, and press OK. Press OK again when Join Calls? appears. Access your phonebook contacts. 1. Press OK to select, and then scroll through your phone- book contacts. 2. Press OK again when the desired selection appears in the display. 3. Press the phone button. Access your call history log. 1. Press OK to select, then scroll through your call history options (incoming, outgoing or missed). 2. Press OK when the desired selection appears in the display. 3. Press the phone button to call the selection. Exit the current menu.
Phonebook
Call History
Return
Accessing Features through the Phone Menu SYNC's phone menu allows you to redial a number, access your call history and phonebook and sends text messages as well as access phone and system settings.
1. Press the phone button to enter the
phone menu.
2. Scroll to cycle through:
When you select:
You can:
Phone Redial
Call History1
Redial the last number called (if available). Press OK to select, and then press OK again to confirm. Access any previously dialed, received or missed calls after you connect your Bluetooth-enabled phone to SYNC. 1. Press OK to select. 2. Scroll to select from Call History Incoming, Call History Outgoing or Call History Missed. Press OK to make your selection. 3. Press OK or the phone button to call the desired selec- tion.
341
Fusion (CC7) Canada/United States of America, enUSA
SYNC™
When you select:
You can:
Phonebook1,2
Text Message1
Phone Settings 1
SYNC Services
911 Assist
Vehicle Health Report
Mobile Apps
System Settings
Note: The system attempts to automatically re-download your phonebook and call history each time your phone connects to SYNC (if the auto download feature is on and your Bluetooth-enabled cellular phone supports this feature). Access and call any contacts in your previously down- loaded phonebook. 1. Press OK to confirm and enter. If your phonebook has fewer than 255 listings, they appear alphabetically in flat file mode. If there are more than 255 entries, the system organizes them into alphabetical categories. 2. Scroll until the desired contact appears, then press OK. 3. Press OK or the phone button. Send, download and delete text messages.
View your phone's status, set ring tones, select your message notification, change phone book entries and automatically download your cellular phone among other features. Access the SYNC Services portal where you can request various types of information, for example traffic reports and directions3. Automatically place an emergency call to a 911 operator following a crash4. Create and receive a diagnostic report card on your vehicle3. Interact with SYNC-capable mobile applications on your smartphone3. Access Bluetooth Devices menu listings (Add, Connect, Set as Primary, On and Off, Delete) as well as Advanced menu listings (prompts, languages, defaults, master reset, install application and system information). Exit the phone menu by pressing OK.
Exit Phone Menu 1 This is a phone-dependent feature. 2 This is a phone-dependent and speed-dependent feature. 3 This is an optional feature and available in the United States only.
342
Fusion (CC7) Canada/United States of America, enUSA
SYNC™
Text Messaging Note: This is a phone-dependent feature. SYNC allows you to receive, send, download and delete text messages. The system can also read incoming text messages to you so that you do not have to take your eyes off the road. Receiving a Text Message Note: This is a phone-dependent feature. Your phone must support downloading text messages using Bluetooth to receive incoming text messages. When a new message arrives, an audible tone sounds and the display indicates you have a new message. You have these options: • Press the voice button, wait for the prompt and say "Read message" to have SYNC read the message to you. • Press OK to receive and open the text message or do nothing and the message goes into your text message inbox. Press OK again and SYNC reads your message aloud as you are not able
