2009 Dodge Caravan Owners Manual

Download PDF Manual
injured, or injure a passenger during panic braking or in a collision. Pets should be restrained in the rear seat in pet harnesses or pet carriers that are secured by seat belts. REAR SEAT DELETE FEATURE (COMMERCIAL VEHICLES ONLY) — IF EQUIPPED Commercial cargo vehicles are not designed for use as a family vehicle and are not intended for carrying children in the front passenger seat. However, if you must carry a child in a vehicle without a rear seat, the passenger seat should be moved to the full rearward position and the child must be in a proper restraint system based on its age, size and weight. WARNING! NEVER carry a child in a rear facing infant carrier in a vehicle without rear seats. In an accident, serious injury or death may occur from the deploying pas- senger airbag. Commercial Child Restraint Tether Anchor This vehicle is equipped with a child restraint tether anchor located on the lower rear of the front passenger seat. Use this tether anchor to secure only forward- facing child restraints equipped with an upper tether strap. WARNING! Rearward-facing infant restraints must never be se- cured in the passenger seat of a vehicle with a passenger airbag. In an accident, a passenger airbag may deploy causing severe injury or death to infants riding in rearward-facing infant restraints. Restraining Infants and Small Children with Seat Delete Feature (Commercial Vehicles Only) There are different sizes and types of restraints for children from newborn size to the child almost large enough for an adult safety belt. Use the restraint that is correct for your child: THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 • The rearward-facing infant carrier is for babies weigh- ing up to about 20 lbs (9 kg), and less than one year old. THIS TYPE OF SEAT CANNOT BE USED IN A VEHICLE EQUIPPED WITH THE REAR SEAT DE- LETE FEATURE (Commercial Vehicles Only). • The forward-facing child seat is for children from about 20 to 40 lbs (9 to 18 kg), and more than one year old. • A convertible child seat, one that is designed to be used for children who are too heavy for a rearward- facing infant seat, may be used IN THE FORWARD FACING POSITION ONLY, IT MUST NEVER BE INSTALLED FACING TO THE REAR IN A VEHICLE EQUIPPED WITH THE REAR SEAT DELETE FEA- TURE (Commercial Vehicles Only). When a convert- ible seat is properly installed facing forward, the vehicle seat should be adjusted to the rear most position. 92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Children more than 40 lbs (18 kg) should be secured in the passenger seat in a child restraint or belt- positioning booster seat with the seat adjusted to the rear most position. Older children who do not use child restraints or belt-positioning booster seats should ride properly buckled in the passenger seat with the seat adjusted to the rearmost position. Never allow children to slide the shoulder belt behind them or under their arm. Tether Installation for Commercial Vehicles with Rear Seat Delete To secure the child restraint upper tether strap to the vehicle, follow the instructions shown: 1. Locate the child restraint tether anchor on the lower rear of the front passenger seat. 2. Follow the child restraint manufacturer’s directions for proper use of connecting the child restraint to the extended tether strap. 3. Route the tether strap under the head rest. NOTE: Ensure that the child restraint tether strap is centered between the headrest supports underneath the head rest. 4. Using the hook attached to the child restraint tether strap, attach the child restraint tether strap to the metal anchor on the lower rear of the front passenger seat. 5. Following the child seat manufacturer’s instructions, tighten the child restraint tether strap. 6. Inspect the tether anchor strap for nicks, abrasions, discoloration, and loose threads. If these, or any other condition that might affect the performance of the strap is observed, DO NOT USE. Contact your authorized deal- ership for a replacement part. WARNING! The vehicle tether anchor is designed to be used with a child restraint only. It should not be used for any other purpose. Before use, inspect the tether anchor strap for nicks, abrasions, discoloration, and loose threads. If these or any other condition that might affect the performance of the strap is observed, DO NOT USE that strap. Personal injury may result. Contact your authorized dealership for a replacement part. ENGINE BREAK-IN RECOMMENDATIONS A long break-in period is not required for the engine in your vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable. THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 While cruising, brief full-throttle acceleration within the limits of local traffic laws, contributes to a good break-in. Wide-open throttle acceleration in low gear can be detri- mental and should be avoided. The engine oil installed in the engine at the factory is a high-quality energy conserving type lubricant. Oil changes should be consistent with anticipated climate conditions under which vehicle operations will occur. The recommended viscosity and quality grades are shown under “Engine Oil”, under “Maintenance Proce- dures” in section 7 of this manual. NON-DETERGENT OR STRAIGHT MINERAL OILS MUST NEVER BE USED. A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered as a normal part of the break-in and not interpreted as an indication of difficulty. 94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SAFETY TIPS Safety Checks You Should Make Inside the Vehicle Seat Belts Inspect the seat belt system periodically checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system. Front seat belt assemblies must be replaced after a collision. Rear seat belt assemblies must be replaced after a collision if they have been damaged (i.e., bent retractor, torn webbing, etc.). If there is any question regarding belt or retractor condition, replace the belt. Airbag Warning Light The light should come on and remain on for four seconds as a bulb check when the ignition switch is first turned ON. If the LED is not lit during starting and/or the light stays on or comes ON while driving, have the system checked by an authorized dealer. Defroster Check operation by selecting the defrost mode and place the blower control on high speed. You should be able to feel the air directed against the windshield. If the defroster is not working or you are unable NOTE: to feel air against the windshield in defrost mode, please see your authorized dealer service center for repairs. Periodic Safety Checks You Should Make Outside the Vehicle Exhaust Gas Tires Examine tires for excessive tread wear or uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread. Inspect tread and sidewall for cuts or cracks. Check wheel nuts for tightness. Check the tires (including spare) for proper pressure. Lights Have someone observe the operation of exterior lights while you work the controls. Check turn signal and high beam indicator lights on the instrument panel. Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil or other fluid leaks. Also, if gasoline fumes are detected or fuel, power steering fluid, trans- mission fluid or brake fluid leaks are suspected, the cause should be located and corrected immediately. THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 WARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing (CO), follow these safety tips: Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicle in or out of the area. If it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling controls to force outside air into the vehicle. Set the blower at high speed. 96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! If you are required to drive with the deck lid / liftgate open, make sure that all windows are closed, and the climate control blower switch is set at high speed. DO NOT use the recirculation mode. UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 ▫ Inside Day/Night Mirror — If Equipped . . . . 102 ▫ Automatic Dimming Mirror — If Equipped . . 102 ▫ Outside Mirrors . . . . . . . . . . . . . . . . . . . . . . 103 ▫ Driver’s Auto-Dimming Sideview Mirror — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 104 ▫ Outside Mirror Folding Feature . . . . . . . . . . 104 ▫ Power Mirrors — If Equipped . . . . . . . . . . . 104 ▫ Heated Power Mirrors — If Equipped . . . . . . 105 ▫ Tilt Mirrors In Reverse (Available With Memory Seat Only) — If Equipped . . . . . . . . 105 ▫ Illuminated Vanity Mirrors — If Equipped . . . 106 ▫ Blind Spot Monitoring — If Equipped . . . . . . 106 䡵 Hands-Free Communication (UConnect威) — If Equipped. . . . . . . . . . . . . . . . . . . . . . . . . . . 115 ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 117 ▫ Phone Call Features . . . . . . . . . . . . . . . . . . . 125 ▫ UConnect威 System Features . . . . . . . . . . . . . 128 ▫ Advanced Phone Connectivity . . . . . . . . . . . 132 98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Things You Should Know About Your UConnect威 System . . . . . . . . . . . . . . . . . . . . 134 ▫ General Information . . . . . . . . . . . . . . . . . . . 143 䡵 Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 ▫ Manual Front And Second Row Seat Adjuster . . . . . . . . . . . . . . . . . . . . . . . . 144 ▫ Eight–Way Driver And Passenger Power Seat — If Equipped. . . . . . . . . . . . . . . . . . . . . . . 145 ▫ Adjustable Head Restraints . . . . . . . . . . . . . . 146 ▫ Heated Seats — If Equipped . . . . . . . . . . . . . 147 ▫ Manual Reclining Seats — If Equipped . . . . . 148 ▫ Manual Lumbar Adjust Lever — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 149 ▫ Stow ’n Go Seating — If Equipped . . . . . . . . 149 ▫ Easy Access Seating . . . . . . . . . . . . . . . . . . . 153 ▫ Swivel ’n Go Premium Seating — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 154 ▫ Second Row Bench Seat — If Equipped . . . . . 161 ▫ Third Row Power Seat — If Equipped . . . . . . 162 䡵 Driver Memory Seat System — If Equipped . . . 166 ▫ Setting Memory Positions And Linking RKE Transmitter To Memory . . . . . . . . . . . . . . . . 167 ▫ Easy Entry/Exit Seat (Available With Memory Seat Only) . . . . . . . . . . . . . . . . . . . 169 䡵 To Open And Close The Hood . . . . . . . . . . . . . 170 䡵 Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 ▫ Interior Lighting . . . . . . . . . . . . . . . . . . . . . 172 ▫ Parking Lights . . . . . . . . . . . . . . . . . . . . . . . 174 ▫ Headlights . . . . . . . . . . . . . . . . . . . . . . . . . 174 ▫ Automatic Headlights — If Equipped . . . . . . 174 ▫ Headlights On With Wipers — If Equipped . . 175 ▫ Headlight Delay — If Equipped . . . . . . . . . . 175 ▫ Daytime Running Lights (Canada/Fleet Vehicles Only) . . . . . . . . . . . . . . . . . . . . . . . 176 ▫ Front Fog Lights — If Equipped . . . . . . . . . . 177 ▫ Battery Protection . . . . . . . . . . . . . . . . . . . . 177 ▫ Multifunction Lever . . . . . . . . . . . . . . . . . . . 177 ▫ Turn Signals . . . . . . . . . . . . . . . . . . . . . . . . 178 ▫ High Beam/Low Beam Select Switch . . . . . . . 179 ▫ Flash-To-Pass . . . . . . . . . . . . . . . . . . . . . . . 179 䡵 Windshield Wiper And Washers . . . . . . . . . . . 179 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 䡵 Tilt Steering Column — If Equipped . . . . . . . . 181 䡵 Adjustable Pedals — If Equipped . . . . . . . . . . 182 䡵 Electronic Speed Control — If Equipped . . . . . . 183 ▫ To Activate . . . . . . . . . . . . . . . . . . . . . . . . . 184 ▫ To Set At A Desired Speed . . . . . . . . . . . . . . 184 ▫ Deactivating Electronic Speed Control . . . . . . 185 ▫ Resuming Speed . . . . . . . . . . . . . . . . . . . . . 185 ▫ Varying The Speed Setting . . . . . . . . . . . . . . 185 ▫ Accelerating To Pass . . . . . . . . . . . . . . . . . . 186 䡵 Rear Park Assist System — If Equipped . . . . . . 186 ▫ Rear Park Assist Sensors . . . . . . . . . . . . . . . 187 䡵 Rear Backup Camera System — If Equipped . . . 192 100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 Overhead Consoles . . . . . . . . . . . . . . . . . . . . . 194 ▫ Front Overhead Console . . . . . . . . . . . . . . . . 194 䡵 Garage Door Opener — If Equipped . . . . . . . . 197 ▫ Programming HomeLink威 . . . . . . . . . . . . . . 199 ▫ Gate Operator/Canadian Programming . . . . . 202 ▫ Security . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 ▫ Troubleshooting Tips . . . . . . . . . . . . . . . . . . 203 ▫ General Information . . . . . . . . . . . . . . . . . . . 203 䡵 Power Sunroof — If Equipped . . . . . . . . . . . . . 204 ▫ Power Sunroof Operation . . . . . . . . . . . . . . . 204 䡵 Electrical Power Outlets — If Equipped . . . . . . 206 䡵 Power Inverter — If Equipped . . . . . . . . . . . . 208 䡵 Cupholders . . . . . . . . . . . . . . . . . . . . . . . . . . 209 ▫ Instrument Panel Cupholders . . . . . . . . . . . . 209 ▫ Interior Bottle Holders . . . . . . . . . . . . . . . . . 210 ▫ Smoker’s Package Kit — If Equipped . . . . . . 210 䡵 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 ▫ Glove Compartments . . . . . . . . . . . . . . . . . . 211 ▫ Door Trim Panel Storage . . . . . . . . . . . . . . . 212 ▫ Driver Seatback Storage — If Equipped . . . . . 213 ▫ Second Row Seat Storage Bins — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 214 ▫ Rear Compartment Storage Bins . . . . . . . . . . 215 ▫ Coat Hooks . . . . . . . . . . . . . . . . . . . . . . . . . 216 ▫ Cargo Area Storage . . . . . . . . . . . . . . . . . . . 216 䡵 Console Features . . . . . . . . . . . . . . . . . . . . . . 217 ▫ Basic Console . . . . . . . . . . . . . . . . . . . . . . . 217 ▫ Premium Console — If Equipped . . . . . . . . . 218 䡵 Electric Rear Window Defroster — If Equipped. . . . . . . . . . . . . . . . . . . . . . . . . . . 223 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 䡵 Umbrella Holder . . . . . . . . . . . . . . . . . . . . . . 224 䡵 Load-Leveling System . . . . . . . . . . . . . . . . . . . 224 䡵 Roof Luggage Rack — If Equipped . . . . . . . . . 225 䡵 Sun Screens — If Equipped . . . . . . . . . . . . . . . 227 102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror — If Equipped A two point pivot system allows for horizontal and vertical adjustment of the mirror. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle). The mirror should be adjusted while set in the day position (toward the windshield). Manual Rearview Mirror Automatic Dimming Mirror — If Equipped When using this feature the mirror will automatically adjust for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light in the button will indicate when the dimming feature is activated. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 Outside Mirrors To receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror. WARNING! Vehicles and other objects seen in an outside convex mirror will look smaller and farther away than they really are. Relying too much on side convex mirrors could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in a side convex mirror. Automatic Dimming Mirror CAUTION! To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean. 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Driver’s Auto-Dimming Sideview Mirror — If Equipped This mirror automatically adjusts for annoying headlight glare from vehicles behind you. You can turn this feature on or off by pressing the button at the base of the rearview mirror. Outside Mirror Folding Feature All outside mirrors are hinged and may be moved either forward or rearward to resist damage. The hinges have three detent positions; full forward, full rearward and normal. Power Mirrors — If Equipped Use the mirror select switch located on the drivers door trim panel to adjust the view obtained in the outside mirrors. Press the switch to the Left or Right for mirror selection. Press the mirror select switch again to guard against accidentally moving a mirror position. The mirror selection will also automatically turn off after 30 seconds. Power Side Mirror Adjust 1 — Left Mirror 2 — Right Mirror 3 — Adjusting Switch Select a mirror and press one of the four arrows for the direction you want the mirror to move. Driver’s power mirror preselected positions can be con- trolled by the optional Driver Memory Seat Feature. Refer to “Driver Memory Seat” in Section 3. Heated Power Mirrors — If Equipped These mirrors are heated to melt frost or ice. This feature is activated whenever you turn on the rear window defrost. Refer to “Electric Rear Window De- froster — If Equipped” in this section. Tilt Mirrors in Reverse (Available with Memory Seat Only) — If Equipped This additional feature provides automatic outside mir- ror positioning which will aid the drivers view of the UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 ground rearward of the front doors. The outside mirrors will move slightly downward from the present position when the vehicle is shifted into the Reverse position. The outside mirrors will then return to the original position when the vehicle is shifted out of Reverse position. Each stored memory setting will have an associated Tilt Mir- rors in Reverse position. NOTE: The Tilt Mirrors in Reverse feature is not en- abled when delivered from the factory. The Tilt Mirrors in Reverse feature can be enabled or disabled in the Elec- tronic Vehicle Information Center (EVIC). Refer to “Tilt Mirrors in Reverse” under “Customer-Programmable Features” under “Electronic Vehicle Information Center (EVIC) in Section 4. 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Illuminated Vanity Mirrors — If Equipped An illuminated vanity mirror is located on the sun visor. To use the mirror, rotate the sun visor down and swing the mirror cover upward. The lights turn on automati- cally. Closing the mirror cover turns off the lights. Blind Spot Monitoring — If Equipped The Blind Spot Monitoring (BSM) system uses two radar- based sensors, located inside the rear bumper fascia, to detect Highway licensable vehicles (automobiles, trucks, motorcycles etc.) that enter the blind spot zones from the rear/front/side of the vehicle. Illuminated Mirror Rear Detection Zones When the vehicle is started, the BSM warning light will be momentarily illuminated in both outside rear view mirrors to let the driver know that the system is opera- tional. The BSM system sensors operate when the vehicle is in any forward gear or REVERSE and enters stand by mode when the vehicle is in PARK. The BSM detection zone covers approximately one lane on both sides of the vehicle (11 ft or 3.35 m). The zone starts at the outside rear view mirror and extends ap- proximately 20 ft (6 m) to the rear of the vehicle. The BSM system monitors the detection zones on both sides of the vehicle when the vehicle speed has reached approxi- mately 6 mph (10 km/h) or higher and will alert the driver of vehicles in these areas. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 NOTE: • The BSM system does NOT alert the driver about rapidly approaching vehicles that are outside the detection zones. • The BSM system detection zone DOES NOT change if your vehicle is towing a trailer. Therefore, visually verify the adjacent lane is clear for both your vehicle and trailer before making a lane change. If the trailer or other object (i.e., bicycle, sports equipment) extends beyond the side of your vehicle, this may result in the BSM warning light remaining illuminated the entire time the vehicle is in a forward gear. 108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The area on the rear fascia where the radar sensors are located must remain free of snow, ice, and dirt/road contamination so that the BSM system can function properly. Do not block the area of the rear fascia where the radar sensors are located with foreign objects (bumper stickers, bicycle racks, etc.). The BSM system notifies the driver of objects in the detection zones by illuminating the BSM warning light located in the outside mirrors. Sensor Locations BSM Warning Light The BSM system can also be configured to sound an audible (chime) alert and mute the radio to notify the driver of objects that have entered the detection zones. Refer to “Modes Of Operation” in this section. The BSM system monitors the detection zone from three different entry points (Side, Rear, Front) while driving to see if an alert is necessary. The BSM system will issue an alert during these types of zone entries. Entering From The Side Vehicles that move into your adjacent lanes from either side of the vehicle. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 Side Monitoring 110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Entering From The Rear Vehicles that come up from behind your vehicle on either side and enter the rear detection zone with a relative speed of less than 30 mph (48 km/h). Overtaking Traffic If you pass another vehicle slowly (with a relative speed less than 10 mph (16 km/h) and the vehicle remains in the blind spot for approximately 1.5 seconds, the warning light will be illuminated. If the difference in speed between the two vehicles is greater than 10 mph (16 km/h), the warning light will not illuminate. Rear Monitoring Overtaking/Approaching UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Overtaking/Passing Stationary Objects The BSM system is designed not to issue an alert on stationary objects such as guardrails, posts, walls, foliage, berms, etc. However, occasionally the system may alert on such objects. This is normal operation and your vehicle does not require service. 112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The BSM system will not alert you of objects that are traveling in the opposite direction of the vehicle in adjacent lanes. Opposing Traffic WARNING! The Blind Spot Monitoring system is only an aid to help detect objects in the blind spot zones. The BSM system is not designed to detect pedestrians, bicy- clists, or animals. Even if your vehicle is equipped with the BSM system, always check your vehicles mirrors, glance over your shoulder, and use your turn signal before changing lanes. Failure to do so can result in serious injury or death. Rear Cross Path — If Equipped The Rear Cross Path (RCP) feature is intended to aid the driver when backing out of parking spaces where their vision of oncoming vehicles may be blocked. Proceed slowly and cautiously out of the parking space until the rear end of the vehicle is exposed. The RCP system will then have a clear view of the cross traffic and if an oncoming vehicle is detected, alert the driver. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 In a parking lot situation, oncoming vehicles can NOTE: be obscured by vehicles parked on either side. If the sensors are blocked by other structures or vehicles, the system will not be able to alert the driver. When RCP is on and the vehicle is in REVERSE, the driver is alerted using both the visual and audible alarms, including radio muting. WARNING! RCP is not a Back Up Aid system. It is intended to be used to help a driver detect an oncoming vehicle in a parking lot situation. Drivers must be careful when backing up, even when using RCP. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before back- ing up. Failure to do so can result in serious injury or death. RCP Detection Zones RCP monitors the rear detection zones on both sides of the vehicle, for objects that are moving toward the side of the vehicle with a minimum speed of approximately 1 to 2 mph (1 km/h to 3 km/h), to objects moving a maxi- mum of approximately 10 mph (16 km/h), such as in parking lot situations. 114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Modes Of Operation Three selectable modes of operation are available in the Electronic Vehicle Information Center (EVIC). Refer to “Personal Settings (Customer-Programmable Features) under ⬙Electronic Vehicle Information Center (EVIC)” in Section 4. Blind Spot Alert When operating in Blind Spot Alert mode, the BSM system will provide a visual alert in the appropriate side view mirror based on a detected object. However, when the system is operating in RCP, the system will respond with both visual and audible alerts when a detected object is present. Whenever an audible alert is requested, the radio is muted. Blind Spot Alert Lights/Chime When operating in Blind Spot Alert Lights/Chime, the BSM system will provide a visual alert in the appropriate side view mirror based on a detected object. If the turn signal is then activated, and it corresponds to an alert present on that side of the vehicle, an audible chime will also be sounded. Whenever a turn signal and detected object are present on the same side at the same time, both the visual and audio alerts will be issued. In addition to the audible alert the radio (if on) will also be muted. NOTE: • Whenever an audible alert is requested by the BSM • If the hazard flashers are on, the system will request system, the radio is also muted. the appropriate visual alert only. When the system is in RCP, the system shall respond with both visual and audible alerts when a detected object is present. Whenever an audible alert is re- quested, the radio is also muted. Turn/hazard signal status is ignored; the RCP state always requests the chime. Blind Spot Alert Off When the BSM system is turned off there will be no visual or audible alerts from either the BSM or RCP systems. NOTE: The BSM system will store the current operating mode when the vehicle is shut off. Each time the vehicle is started the previously stored mode will be recalled and used. HANDS-FREE COMMUNICATION (UConnect姞) — IF EQUIPPED NOTE: The sales code RER and REU radios contain an integrated Hands-Free Communication (UConnect威) system. Refer to your “Navigation User’s Manual” for UConnect威 system operating instructions for these ra- dios. UConnect威 is a voice-activated, hands-free, in-vehicle communications system. UConnect威 allows you to dial a UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 phone number with your cellular phone using simple voice commands (e.g., ⬙Call” ѧ “Mike” ѧ”Work⬙ or ⬙Dial” ѧ “248-555-1212⬙). Your cellular phone’s audio is trans- mitted through your vehicle’s audio system; the system will automatically mute your radio when using the UConnect威 system. NOTE: The UConnect威 system requires a cellular phone equipped with the Bluetooth威 ⬙Hands-Free Profile,⬙ Ver- sion 0.96 or higher. See the UConnect威 website for supported phones. NOTE: following websites: • www.chrysler.com/uconnect • www.dodge.com/uconnect • www.jeep.com/uconnect • or call 1–877–855–8400 For UConnect威 customer support, visit the 116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE cellular profile” “Hands-Free UConnect威 allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. The UConnect威 system is driven through your Bluetooth威 phone. UConnect威 features Bluetooth威 technology - the global standard that enables different electronic devices to con- nect to each other without wires or a docking station, so UConnect威 works no matter where you stow your cellu- lar phone (be it your purse, pocket, or briefcase), as long as your phone is turned on and has been paired to the vehicle’s UConnect威 system. The UConnect威 system allows up to seven cellular phones to be linked to the system. Only one linked (or paired) cellular phone can be used with the system at a time. The system is available in English, Spanish, or French languages. Phone Button The rearview mirror contains the microphone for the system (depending on the type of mirror and radio equipped), and either the radio or the mirror has the two control buttons (PHONE Button and VOICE RECOGNITION button) that will enable you to access the system. Voice Recognition Button Actual button location may vary with radio. The individual buttons are described in the “Operation” section. The UConnect威 system can be used with any Hands-Free Profile certified Bluetooth威 cellular phone. See the UConnect威 website for supported phones. If your cellu- lar phone supports a different profile (e.g., Headset Profile) you may not be able to use any UConnect威 features. Refer to your cellular service provider or the phone manufacturer for details. The UConnect威 system is fully integrated with the vehi- cle’s audio system. The volume of the UConnect威 system can be adjusted either from the radio volume control knob or from the steering wheel radio control (right switch), if so equipped. The radio display will be used for visual prompts from the UConnect威 system such as ⬙CELL⬙ or caller ID on certain radios. Operation Voice commands can be used to operate the UConnect威 system and to navigate through the UConnect威 menu structure. Voice commands are required after most UConnect威 system prompts. You will be prompted for a specific command and then guided through the available options. • Prior to giving a voice command, one must wait for the beep, which follows the ⬙Ready⬙ prompt or another prompt. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 • For certain operations, compound commands can be used. For example, instead of saying ⬙Setup⬙ and then ⬙Phone Pairing,⬙ the following compound command can be said: ⬙Setup Phone Pairing.⬙ • For each feature explanation in this section, only the combined form of the voice command is given. You can also break the commands into parts and say each part of the command when you are asked for it. For example, you can use the combined form voice com- mand ⬙Phonebook New Entry,⬙ or you can break the combined form command into two voice commands: ⬙Phonebook⬙ and ⬙New Entry.⬙ Please remember, the UConnect威 system works best when you talk in a normal conversational tone, as if speaking to someone sitting a few feet/meters away from you. Voice Command Tree Refer to “Voice Tree” in this section. 118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Help Command If you need assistance at any prompt, or if you want to know your options at any prompt, say ⬙Help⬙ following the beep. The UConnect威 system will play all the options at any prompt if you ask for help. To activate the UConnect威 system from idle, simply press the PHONE button and follow the audible prompts for directions. All UConnect威 system sessions begin with a press of the PHONE button on the radio control head. Cancel Command At any prompt, after the beep, you can say ⬙Cancel⬙ and you will be returned to the main menu. However, in a few instances the system will take you back to the previous menu. Pair (Link) UConnect威 System to a Cellular Phone To begin using your UConnect威 system, you must pair your compatible Bluetooth威 enabled cellular phone. To complete the pairing process, you will need to refer- ence your cellular phone Owner’s Manual. The UConnect威 website may also provide detailed instruc- tions for pairing. The following are general phone to UConnect威 system pairing instructions: • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say • When prompted, after the beep, say ⬙Pair a Phone⬙ and • You will be asked to say a four-digit Personal Identi- fication Number (PIN), which you will later need to enter into your cellular phone. You can enter any four-digit PIN. You will not need to remember this PIN after the initial pairing process. follow the audible prompts. ⬙Setup Phone Pairing.⬙ • For identification purposes, you will be prompted to give the UConnect威 system a name for your cellular phone. Each cellular phone that is paired should be given a unique phone name. • You will then be asked to give your cellular phone a priority level between 1 and 7, with 1 being the highest priority. You can pair up to seven cellular phones to your UConnect威 system. However, at any given time, only one cellular phone can be in use, connected to your UConnect威 system. The priority allows the UConnect威 system to know which cellular phone to use if multiple cellular phones are in the vehicle at the same time. For example, if priority 3 and priority 5 phones are present in the vehicle, the UConnect威 system will use the priority 3 cellular phone when you make a call. You can select to use a lower priority cellular phone at any time (refer to ⬙Advanced Phone Connectivity⬙ in this section). UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 ⬙Dial.⬙ Dial by Saying a Number • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say • The system will prompt you to say the number you • For example, you can say ⬙234-567-8901⬙. • The UConnect威 system will confirm the phone num- ber and then dial. The number will appear in the display of certain radios. want to call. Call by Saying a Name • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say “Call.⬙ 120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE person you want to call. • The system will prompt you to say the name of the • After the ⬙Ready⬙ prompt and the following beep, say the name of the person you want to call. For example, you can say ⬙John Doe,⬙ where John Doe is a previ- ously stored name entry in the UConnect威 phonebook or downloaded phonebook. To learn how to store a name in the phonebook, refer to ⬙Add Names to Your UConnect威 Phonebook,⬙ in the phonebook. • The UConnect威 system will confirm the name and then dial the corresponding phone number, which may appear in the display of certain radios. Add Names to Your UConnect威 Phonebook NOTE: Adding names to the UConnect威 phonebook is recommended when the vehicle is not in motion. • Press the PHONE button to begin. ⬙Phonebook New Entry.⬙ • After the ⬙Ready⬙ prompt and the following beep, say • When prompted, say the name of the new entry. Use of long names helps the voice recognition and it is recommended. For example, say ⬙Robert Smith⬙ or ⬙Robert⬙ instead of ⬙Bob.⬙ • When prompted, enter the number designation (e.g., ⬙Home,⬙ ⬙Work,⬙ ⬙Mobile,⬙ or ⬙Pager⬙). This will allow you to store multiple numbers for each phonebook entry, if desired. • When prompted, recite the phone number for the phonebook entry that you are adding. After you are finished adding an entry into the phone- book, you will be given the opportunity to add more phone numbers to the current entry or to return to the main menu. The UConnect威 system will allow you to enter up to 32 names in the phonebook with each name having up to four associated phone numbers and designations. Each language has a separate 32-name phonebook accessible only in that language. In addition, if equipped and supported by your phone, UConnect威 automatically downloads mobile phone’s phonebook. Phonebook Download – Automatic Phonebook transfer from Mobile phone If equipped and specifically supported by your phone, UConnect威 automatically downloads names (text names) and number entries from the mobile phone’s phonebook. Specific Bluetooth威 Phones with Phone Book Access Profile may support this feature. See UConnect威 website for supported phones. • To call a name from downloaded (or UConnect威) Phonebook, follow the procedure in “Call by Saying a Name” section. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 • Automatic download and update, if supported, begins as soon as the phone Bluetooth威 wireless connection is made to the UConnect威. For example, after you start the vehicle. • Maximum of 1000 entries per phone will be down- loaded and updated every time a phone is connected to the UConnect威. • Depending on the maximum number of entries down- loaded, there may be a short delay before the latest downloaded names can be used. Until then, if avail- able, previous downloaded phonebook is available for use. • Only the phonebook of the currently connected mobile • Only the Mobile phone’s phonebook is downloaded. SIM card phonebook is not part of the Mobile phone- book. phone is accessible. 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • This downloaded phonebook cannot be edited or deleted on the UConnect威. These can only be edited on the mobile phone. The changes are transferred and updated to UConnect威 on the next phone connection. Phonebook Download — Single Entry If equipped and supported by your phone, UConnect威 allows the user to download entries from their phone via Bluetooth威. To use this feature, press the PHONE button and say “Phonebook Download.” The system prompts, “Ready to accept “V” card entry via Bluetooth威…” The system is now ready to accept phonebook entries from your phone using the Bluetooth威 Object Exchange Profile (OBEX). Please see your phone Owner’s Manual for specific instructions on how to send these entries from your phone. NOTE: • The phone handset must support Bluetooth威 OBEX transfers of phonebook entries to use this feature. • Some phones cannot send phonebook entries if they are already connected to any system via Bluetooth威, and you may see a message on the phone display that the Bluetooth威 link is busy. In this case, the user must first disconnect or drop the Bluetooth威 connection to the UConnect威 system, and then send the address book entry via Bluetooth威. Please see your phone Owner’s Manual for specific instructions on how to drop the Bluetooth威 connection. • If the phonebook entry is longer than 24 characters, it will only use the first 24 characters. Edit UConnect威 Phonebook Entries NOTE: • Editing names in the phonebook is recommended • Automatic downloaded phonebook entries cannot be when the vehicle is not in motion. deleted or edited. ⬙Phonebook Edit.⬙ • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say • You will then be asked for the name of the phonebook • Next, choose the number designation (home, work, • When prompted, recite the new phone number for the mobile, or pager) that you wish to edit. entry that you wish to edit. phonebook entry that you are editing. After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in the phonebook, call the number you just edited, or return to the main menu. ⬙Phonebook Edit⬙ can be used to add another phone number to a name entry that already exists in the phone- book. For example, the entry John Doe may have a mobile UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 ⬙Phonebook Delete.⬙ and a home number, but you can add ”John Doe’s” work number later using the ⬙Phonebook Edit⬙ feature. Delete UConnect威 Phonebook Entry NOTE: Editing phonebook entries is recommended when the vehicle is not in motion. • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say • After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete. You can either say the name of a phonebook entry that you wish to delete or you can say ⬙List Names⬙ to hear a list of the entries in the phonebook from which you choose. To select one of the entries from the list, press the “Voice Recognition” button while the UConnect威 system is playing the desired entry and say ⬙Delete.⬙ 124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After you enter the name, the UConnect威 system will ask you which designation you wish to delete: home, work, mobile, pager, or all. Say the designation you wish to delete. • Note that only the phonebook entry in the current • Automatic downloaded phonebook entries cannot be language is deleted. deleted or edited. Delete/Erase “All” UConnect威 Phonebook Entries • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say • The UConnect威 system will ask you to verify that you • After confirmation, the phonebook entries will be wish to delete all the entries from the phonebook. ⬙Phonebook Erase All.⬙ deleted. • Note that only the phonebook in the current language • Automatic downloaded phonebook entries cannot be is deleted. deleted or edited. ⬙Phonebook List Names.⬙ List All Names in the UConnect威 Phonebook • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say • The UConnect威 system will play the names of all the phonebook entries, including the downloaded phone- book entries, if available. • To call one of the names in the list, press the “Voice Recognition” button during the playing of the desired name, and say ⬙Call.⬙ NOTE: The user can also exercise ⬙Edit⬙ or ⬙Delete⬙ operations at this point. • The UConnect威 system will then prompt you as to the number designation you wish to call. • The selected number will be dialed. Phone Call Features The following features can be accessed through the UConnect威 system if the feature(s) are available on your cellular service plan. For example, if your cellular service plan provides three-way calling, this feature can be accessed through the UConnect威 system. Check with your cellular service provider for the features that you have. Answer or Reject an Incoming Call - No Call Currently in Progress When you receive a call on your cellular phone, the UConnect威 system will interrupt the vehicle audio sys- tem, if on, and will ask if you would like to answer the call. Press the PHONE button to accept the call. To reject UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 the call, press and hold the PHONE button until you hear a single beep, indicating that the incoming call was rejected. Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cell phone. Press the PHONE button to place the current call on hold and answer the incoming call. NOTE: The UConnect威 system compatible phones in the market today do not support rejecting an incoming call when another call is in progress. Therefore, the user can only answer an incoming call or ignore it. 126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Making a Second Call While Current Call in Progress To make a second call while you are currently on a call, press the “Voice Recognition” button and say ⬙Dial⬙ or ⬙Call⬙ followed by the phone number or phonebook entry you wish to call. The first call will be on hold while the second call is in progress. To go back to the first call, refer to ⬙Toggling Between Calls⬙ in this section. To combine two calls, refer to ⬙Conference Call⬙ in this section. Place/Retrieve a Call From Hold To put a call on hold, press the PHONE button until you hear a single beep. This indicates that the call is on hold. To bring the call back from hold, press and hold the PHONE button until you hear a single beep. Toggling Between Calls If two calls are in progress (one active and one on hold), press the PHONE button until you hear a single beep, indicating that the active and hold status of the two calls have switched. Only one call can be placed on hold at one time. Conference Call When two calls are in progress (one active and one on hold), press and hold the PHONE button until you hear a double beep indicating that the two calls have been joined into one conference call. Three-Way Calling To initiate three-way calling, press the “Voice Recogni- tion” button while a call is in progress, and make a second phone call, as described under ⬙Making a Second Call While Current Call in Progress.⬙ After the second call has established, press and hold the PHONE button until you hear a double beep, indicating that the two calls have been joined into one conference call. Call Termination To end a call in progress, momentarily press the PHONE button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. If the active call is terminated by the far end, a call on hold may not become active automatically. This is cell phone-dependent. To bring the call back from hold, press and hold the PHONE button until you hear a single beep. Redial • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say • The UConnect威 system will call the last number that ⬙Redial.⬙ was dialed from your cellular phone. NOTE: This may not be the last number dialed from the UConnect威 system. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 Call Continuation Call continuation is the progression of a phone call on the UConnect威 system after the vehicle ignition key has been switched to OFF. Call continuation functionality avail- able on the vehicle can be any one of three types: • After the ignition key is switched to OFF, a call can continue on the UConnect威 system either until the call ends, or until the vehicle battery condition dictates cessation of the call on the UConnect威 system and transfer of the call to the mobile phone. • After the ignition key is switched to OFF, a call can continue on the UConnect威 system for a certain dura- tion, after which the call is automatically transferred from the UConnect威 system to the mobile phone. • An active call is automatically transferred to the mobile phone after the ignition key is switched to OFF. 128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE UConnect姞 System Features Language Selection To change the language that the UConnect威 system is using: • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say the name of the language you wish to switch to English, Espanol, or Francais. • Continue to follow the system prompts to complete language selection. After selecting one of the languages, all prompts and voice commands will be in that language. NOTE: After every UConnect威 language change opera- tion, only the language-specific 32-name phonebook is usable. The paired phone name is not language-specific and usable across all languages. Emergency Assistance If you are in an emergency and the mobile phone is reachable: • Pick up the phone and manually dial the emergency number for your area. If the phone is not reachable and the UConnect威 system is operational, you may reach the emergency number as follows: • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say ⬙Emergency⬙ and the UConnect威 system will instruct the paired cellular phone to call the emergency num- ber. This feature is supported in the U.S., Canada, and Mexico. NOTE: • The emergency number dialed is based on the country where the vehicle is purchased (911 for the U.S. and Canada and 060 for Mexico). The number dialed may not be applicable with the available cellular service and area. • If supported, this number may be programmable on some systems. To do this, press ‘Phone’ button and say ‘Setup’, followed by ‘Emergency’. • The UConnect威 system does slightly lower your chances of successfully making a phone call as to that for the cell phone directly. WARNING! Your phone must be turned on and paired to the UConnect威 system to allow use of this vehicle feature in emergency situations, when the cell phone has network coverage and stays paired to the UConnect威 system. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Towing Assistance If you need towing assistance: • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say ⬙Towing Assistance.⬙ NOTE: • The Towing Assistance number dialed is based on the country where the vehicle is purchased (1-800-528- 2069 for the U.S., 1-877-213-4525 for Canada, 55-14- 3454 for Mexico City and 1-800-712-3040 for outside Mexico City in Mexico). • If supported, this number may be programmable on some systems. To do this, press ‘Phone’ button and say ‘Setup’, followed by ‘Towing Assistance’. Paging To learn how to page, refer to ⬙Working with Automated Systems.⬙ Paging works properly except for pagers of 130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE certain companies, which time out a little too soon to work properly with the UConnect威 system. Voice Mail Calling To learn how to access your voice mail, refer to ⬙Working with Automated Systems.⬙ Working with Automated Systems This method is used in instances where one generally has to press numbers on the cellular phone keypad while navigating through an automated telephone system. You can use your UConnect威 system to access a voice mail system or an automated service, such as a paging service or automated customer service line. Some ser- vices require immediate response selection. In some instances, that may be too quick for use of the UConnect威 system. When calling a number with your UConnect威 system that normally requires you to enter in a touch-tone sequence on your cellular phone keypad, you can press the “Voice Recognition” button and say the sequence you wish to enter, followed by the word ⬙Send.⬙ For example, if required to enter your PIN followed with a pound, (3 7 4 6 #), you can press the “Voice Recognition” button and say, ⬙3 7 4 6 # Send.⬙ Saying a number, or sequence of numbers, followed by ⬙Send,⬙ is also to be used for navigating through an automated customer service cen- ter menu structure, and to leave a number on a pager. You can also send stored UConnect威 phonebook entries as tones for fast and easy access to voice mail and pager entries. To use this feature, dial the number you wish to call and then press the “Voice Recognition” button and say, “Send.” The system will prompt you to enter the name or number and say the name of the phonebook entry you wish to send. The UConnect威 system will then send the corresponding phone number associated with the phonebook entry, as tones over the phone. network configurations; this is normal. NOTE: • You may not hear all of the tones due to cellular phone • Some paging and voice mail systems have system time out settings that are too short and may not allow the use of this feature. Barge In - Overriding Prompts The “Voice Recognition” button can be used when you wish to skip part of a prompt and issue your voice recognition command immediately. For example, if a prompt is asking ⬙Would you like to pair a phone, clear aѧ,⬙ you could press the “Voice Recognition” button and say, ⬙Pair a Phone⬙ to select that option without having to listen to the rest of the voice prompt. Turning Confirmation Prompts On/Off Turning confirmation prompts off will stop the system from confirming your choices (e.g., the UConnect威 sys- tem will not repeat a phone number before you dial it). UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say ⬙Setup Confirmations.⬙ The UConnect威 system will play the current confirmation prompt status and you will be given the choice to change it. Phone and Network Status Indicators If available on the radio and/or on a premium display such as the instrument panel cluster, and supported by your cell phone, the UConnect威 system will provide notification to inform you of your phone and network status when you are attempting to make a phone call using UConnect威. The status is given for roaming, net- work signal strength, phone battery strength, etc. Dialing Using the Cellular Phone Keypad You can dial a phone number with your cellular phone keypad and still use the UConnect威 system (while dial- ing via the cell phone keypad, the user must exercise caution and take precautionary safety measures). By 132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE dialing a number with your paired Bluetooth威 cellular phone, the audio will be played through your vehicle’s audio system. The UConnect威 system will work the same as if you dial the number using voice recognition. NOTE: Certain brands of mobile phones do not send the dial ring to the UConnect威 system to play it on the vehicle audio system, so you will not hear it. Under this situation, after successfully dialing a number the user may feel that the call did not go through even though the call is in progress. Once your call is answered, you will hear the audio. Mute/Un-Mute (Mute Off) When you mute the UConnect威 system, you will still be able to hear the conversation coming from the other party, but the other party will not be able to hear you. In order to mute the UConnect威 system: • Press the “Voice Recognition” button. • Following the beep, say ⬙Mute.⬙ In order to un-mute the UConnect威 system: • Press the “Voice Recognition” button. • Following the beep, say ⬙Mute off.⬙ Advanced Phone Connectivity Transfer Call to and from Cellular Phone The UConnect威 system allows ongoing calls to be trans- ferred from your cellular phone to the UConnect威 system without terminating the call. To transfer an ongoing call from your UConnect威 paired cellular phone to the UConnect威 system or vice versa, press the “Voice Recog- nition” button and say ⬙Transfer Call.⬙ Connect or Disconnect Link Between the UConnect威 System and Cellular Phone Your cellular phone can be paired with many different electronic devices, but can only be actively ⬙connected⬙ with one electronic device at a time. If you would like to connect or disconnect the Bluetooth威 connection between a UConnect威 paired cellular phone and the UConnect威 system, follow the instructions de- scribed in your cellular phone User’s Manual. List Paired Cellular Phone Names • Press the PHONE button to begin. • After the “Ready” prompt and the following beep, say • When prompted, say ⬙List Phones.⬙ • The UConnect威 system will play the phone names of all paired cellular phones in order from the highest to “Setup Phone Pairing.” UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 the lowest priority. To “select” or “delete” a paired phone being announced, press the “Voice Recogni- tion” button and say “Select” or “Delete.” Also, see the next two sections for an alternate way to “select” or “delete” a paired phone. Select Another Cellular Phone This feature allows you to select and start using another phone paired with the UConnect威 system. • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say • You can also press the “Voice Recognition” button at any time while the list is being played, and then choose the phone that you wish to select. ⬙Setup Select Phone⬙ and follow the prompts. 134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If • The selected phone will be used for the next phone call. the UConnect威 system will return to using the highest priority phone present in or near (approximately within 30 ft [9 m]) the vehicle. the selected phone is not available, ⬙Setup Phone Pairing.⬙ Delete UConnect威 Paired Cellular Phones • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say • At the next prompt, say ⬙Delete⬙ and follow the • You can also press the “Voice Recognition” button at any time while the list is being played, and then choose the phone you wish to delete. prompts. Things You Should Know About Your UConnect姞 System UConnect威 Tutorial To hear a brief tutorial of the system features, press the PHONE button and say “UConnect威 Tutorial.” Voice Training For users experiencing difficulty with the system recog- nizing their voice commands or numbers, the UConnect威 system Voice Training feature may be used. To enter this training mode, follow one of the two following proce- dures: From outside the UConnect威 mode (e.g., from radio mode): • Press and hold the “Voice Recognition” button for five • Press the “Voice Recognition” button and say the seconds until the session begins, or, ⬙Setup, Voice Training⬙ command. Repeat the words and phrases when prompted by the UConnect威 system. For best results, the Voice Training session should be completed when the vehicle is parked with the engine running, all windows closed, and the blower fan switched OFF. This procedure may be repeated with a new user. The system will adapt to the last trained voice only. To restore the Voice Recognition system to factory default settings, enter the Voice Training session via the above procedure and follow the prompts. Voice Recognition (VR) • For best performance, adjust the rearview mirror to provide at least 1⁄2 in (1 cm) gap between the overhead console (if equipped) and the mirror. • Always wait for the beep before speaking. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 • Speak normally, without pausing, just as you would speak to a person sitting a few feet/meters away from you. • Make sure that no one other than you is speaking during a voice recognition period. • Performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather condition. • Even though the system is designed for users speaking in North American English, French, and Spanish ac- cents, the system may not always work for some. 136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE not in motion is recommended. names in the UConnect威 phonebook. • When navigating through an automated system such as voice mail, or when sending a page, at the end of speaking the digit string, make sure to say ⬙Send.⬙ • Storing names in the phonebook when the vehicle is • It is not recommended to store similar sounding • Phonebook (Downloaded and UConnect Local) name recognition rate is optimized when the entries are not similar. • You can say ⬙O⬙ (letter ⬙O⬙) for ⬙0⬙ (zero). ⬙800⬙ must be • Even though international dialing for most number combinations is supported, some shortcut dialing number combinations may not be supported. spoken ⬙eight-zero-zero.⬙ • In a convertible vehicle, system performance may be compromised with the convertible top down. Far End Audio Performance • Audio quality is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather conditions, and • operation from the driver’s seat. • Performance, such as audio clarity, echo, and loudness to a large degree rely on the phone and network, and not the UConnect威 system. • Echo at the far end can sometimes be reduced by • In a convertible vehicle, system performance may be lowering the in-vehicle audio volume. compromised with the convertible top down. Bluetooth威 Communication Link Cellular phones have been found to lose connection to the UConnect威 system. When this happens, the connec- tion can generally be re-established by switching the phone off/on. Your cell phone is recommended to remain in Bluetooth威 ON mode. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Power-Up After switching the ignition key from OFF to either ON or ACC position, or after a language change, you must wait at least five seconds prior to using the system. 138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Alternate(s) Primary zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Voice Commands Alternate(s) Primary call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home 142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Alternate(s) pairing phone book Primary language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing phonebook previous record again redial Voice Commands Alternate(s) return or main menu select phone settings or phone set up Primary return to main menu select phone send set up towing assistance transfer call UConnect威 Tutorial try again voice training work yes General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 SEATS Seats are a primary part of the Occupant Restraint (protection) System of the vehicle. They need to be used properly for safe operation of the vehicle. WARNING! • DO NOT allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Be sure everyone in your vehicle is in a seat and using a seat belt properly. 144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Front And Second Row Seat Adjuster The adjusting bar is located under the front of the seat. Pull the bar upward and move the seat to the desired position. Release the bar to lock the seat into position. Using body pressure, move forward and rearward on the seat to be sure the seat adjusters have latched. WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust any seat only while the vehicle is parked. Manual Seat Adjuster UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 Eight–Way Driver And Passenger Power Seat — If Equipped The power seat switches are located on the outboard side of the seat. The front switch controls the up/down, forward/rearward and tilt adjustment. The rear switch controls the recline adjustment of the seatback. Driver Power Seat Switch 1 — Front Switch 2 — Rear Switch 146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! DO NOT place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path. Adjustable Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear. Pull upward or push downward on the head restraint cushion so that the upper edge is as high as practical. To raise the head restraint, pull upward on the head restraint. To lower the head restraint, depress the release tab located at the base of the head restraint and push downward on the head restraint. Adjusting The Head Restraint Cushion 2 — Lowering Release 1 — Removal Release Heated Seats — If Equipped This feature heats the front driver and passenger seats. The controls for front heated seats are located on the center instrument panel area. The switch indicator lights will show when the High or Low heat is on. Press the switch once to choose High (two lights), press it a second time to choose Low (one light), press it a third time to turn the heater Off (no lights). UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 Second row heated seat switches are located in the sliding side door handle trim panels and function the same as front switches. Heated Seat Switch 148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaus- tion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time. DO NOT place anything on the seat that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Manual Reclining Seats — If Equipped The recliner control lever is on the outboard side of the seat. To recline, lean forward slightly, lift the lever, then push back to the desired position and release the lever. Lean forward and lift the lever to return the seatback to its normal position. Using body pressure, lean forward and rearward on the seat to be sure the seatback has latched. Manual Reclining Seat Control WARNING! DO NOT ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or fatally injured. Use the recliner only when the vehicle is parked. Manual Lumbar Adjust Lever — If Equipped The lumbar adjustment lever is located on the outboard side of the seat. To increase the support, rotate the lever downward. To decrease the support, rotate the handle upward. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 Manual Lumbar Lever Stow ’n Go Seating — If Equipped On vehicles equipped with Stow ’n Go seating, the second and third row seats may be folded into the floor for convenient storage. 150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Fold Second Row Seats 1. Move the front seat fully forward. 2. Lower the head restraints and raise the armrests on the second row seat. 3. Slide the storage bin locking mechanism to the ⬙LOCK⬙ position and then pull up on the storage bin latch to open the cover. Storage Bin Cover Lock Release 4. Pull up on the seatback recliner lever located on the outboard side of the seat and fold the seatback down. To assure the seatback is latched in the folded position, additional downward pressure on the seatback may be required when folding. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 Second Row Seatback Release Lever 5. Pull rearward on the release strap located at the rear of the seat and tumble the seat forward into the storage bin. Second Row Seat Release Strap 6. Close the storage bin cover. 152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! 2. Pull up on the handle to lift the seat out of the storage bin and push the seat rearward to latch the seat anchors. The storage bin cover must be locked and flat to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover. WARNING! In an accident, serious injury could result if the seat storage bin covers are not properly latched. • DO NOT drive the vehicle with the storage bin • Keep the storage bin covers closed and latched • DO NOT use a storage bin latch as a tie down. while the vehicle is in motion. covers open. To Unfold Second Row Seats 1. Pull up on the storage bin latch to open the cover. Second Row Seat Release Handle 3. Pull upward on the seatback recliner lever, located on the outboard side of the seat, to return the seatback to its full upright position. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 To tilt the seat, pull forward on the release strap located on the front of the seat between the seatback and seat cushion and tilt the seat fully forward. To return the seat to its upright position, push rearward on the seatback until it latches. Always ensure that it is fully latched. Second Row Seatback Release Lever 4. Adjust the head restraint to the desired position, close the storage bin cover and slide the storage bin locking mechanism to the ⬙Unlocked⬙ position. Easy Access Seating The second row Stow ’n Go seats can be tilted forward for easy access to the third row seat or rear cargo area. Tilting Second Row Stow ’n Go Seat 154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! In the event of a collision you could be injured if the seat is not fully latched. • Seats are removable Swivel ’n Go Premium Seating — If Equipped Premium second row Swivel ’n Go Seating features include: • A table that installs between the second and third row seats. The table disassembles and stows in the hidden second row floor storage bin • Seats rotate to face forward or rearward • Seat belts are integrated into the swivel seats • Dual folding armrests • A side storage pocket that will accommodate a phone or handheld game Swivel ’n Go Seating Features 1 — Moveable Armrest 2 — Seatback Release 3 — Swivel Release 4 — Fore-Aft Adjustment 5 — Seat Release To swivel the seat: Pull the lower handle on the outboard side of the seat and push the side of the seatback to begin rotation. Once the seat begins to rotate, the handle may be released. The seat locks in position once reaching the forward or rearward positions only. Swivel Release Seatbacks fold forward on an angle, not flat. This allows the seats to swivel when the seatbacks are folded. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 WARNING! Failure to comply with the following conditions could result in serious injury or even death. • NEVER place any child seat or infant carrier in the Swivel ’n Go seat while it is in the rearward facing position. • The swivel seat should be locked in the forward position when using any child seat or infant carriers, with the vehicle in motion. WARNING! Failure to comply with the following conditions could result in serious injury or even death. (Continued) 156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Occupants riding in Swivel ’n Go seating must be wearing their seat belt and the seat must be locked in either the forward-facing or rearward-facing position. • Make sure the Swivel ’n Go seat is in a locked position with the release handle fully engaged. Test the seat after it is locked to see that it doesn’t swivel. Removing Swivel ’n Go Premium Seating — If Equipped 1. Remove any obstructions from the floor behind the seat, and stow the third row seat. 2. Pull up on the release bar located at the bottom front edge of the swivel seat. Release Bar 3. From behind the seat, lift up on the rear of the seat cushion while pulling the seat in a rearward direction. 4. Remove the seat from vehicle through the liftgate. Rollers are part of the seat frame and will ease the removal process. 5. Lower the release handle located at the bottom front edge of the seat. Each seat weighs about 90 lbs (81 kg). NOTE: Electrical contacts for the available heated seats automatically disengage or engage as the seat is removed or installed. The contacts slide past each other as the seat is rolled to and from the strikers. When reinstalling the seat, make certain to lower the release handle to ensure the seat is latched securely. WARNING! In a collision, you or others in your vehicle could be injured if seats are not properly latched to their floor attachments. Always be sure the seats are fully latched. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 Swivel ’n Go Premium Seating Table — If Equipped The Swivel ’n Go Seating Table consists of an easily assembled post and top. Second Row Seating and Table 158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The table and leg are stored beneath the floor when not in use. To install the table follow these steps: 1. Open the floor storage cover in front of the second row seats. 3. Swivel the second row seats so they are facing the rear. 4. Insert pole into base by aligning the lock button into notch of the base. Table and Leg Storage 2. Remove the pole and table top by loosening the hook and loop straps. Installing Table Leg Into Base 1 — Table Base 2 — Lock/Release Button 5. Twist the pole in a clockwise rotation until it stops. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 WARNING! (Continued) • DO NOT place liquid drinks on the table, use • Second row seats must be locked in the rearward available cupholders. facing position before installing the table. To separate the table top from the pole, follow these steps: 1. Locate the release latch on the underside of the table top. NOTE: You will hear an audible “click” when the lock button engages the base. 6. Place the table top over the installed pole aligning with the mating feature of the underside of the table top. Apply pressure on the table top and press downward. NOTE: You will hear an audible “click” when the table latch engages the pole. WARNING! Failure to comply with the following conditions could result in serious injury or even death. • DO NOT install the table while vehicle is in • NEVER drive the vehicle with only the pole in- • DO NOT place heavy or sharp objects on table. motion. stalled. (Continued) 160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Table Top Release 2. Pull horizontally on the latch to activate the release from the pole. 3. While pulling on the latch, pull upward to remove the table top from the pole. NOTE: The table top should be removed from the leg prior to removing the leg from its mounting base. 4. Locate the release button on the pole. Press the release button firmly to activate the release from the base. 5. While pressing the release button, twist the pole in a counterclockwise rotation until it stops. Pull upward to remove the pole from the base. 6. Place the pole on the underside of the table top and secure with the hook and loop straps. 7. Once the pole and table top are secured, you may place them in the floor storage bin in front of the second row seats. NOTE: Always store the table and pole in the floor storage bin when not in use. Plastic Grocery Bag Retainer Hooks Retainer hooks which will hold plastic grocery bag handles are built into the seatbacks of all rear seats and some front seats. The floor supports the partial weight of the bagged goods. Second Row Bench Seat — If Equipped While the bench seat does not stow in the floor, it is removable for added cargo space. Release levers are located on the rear leg assemblies, near the floor. To remove the seat, squeeze each release handle and rotate downwards to deploy the wheels. A lock indicator button pops up when the seat is unlocked. The seat assembly can now be removed from the vehicle and moved on its Easy Out威 Rollers. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 Release Handles To reinstall the seat, align the seat into the detent posi- tions on the floor. Squeeze the release handle and rotate upward until the lock indicator button returns into the handle. 162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! If not properly latched, the bench seats could become loose. Personal injuries could result. After reinstall- ing these seats, be sure the red indicator button on the release handles return into the handles. Third Row Power Seat — If Equipped The third row power seat offers the following features: • The seatbacks can be folded forward for additional • Head restraints can be stowed with the seat. • Tailgate mode flips the seat rearward to face out the cargo space if needed. tailgate. The power recline feature, located on the side of the seat cushion, adjusts the seatback angle forward/rearward for occupant comfort. Third Row Power Seat Switch Third Row Power Seat Switch — If Equipped A one-touch power folding seat switch is located in the left rear trim panel as part of a switch bank. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 One Touch Folding Seat Third Row The rear switch bank allows multiple power folding and unfolding positions for the third row seats. Left and right third row seats can be folded individually or together. The third row power folding seat adjusts to the following positions using the switch bank located on the left rear trim panel: Rear Panel Power Switch Bank 1 — Open to Normal 2 — Stow 3 — Tailgate 4 — Fold Flat 5 — Right/Left Seats 5 — Both Seats NOTE: The third row power seat system includes obstacle detection for safe operation. When the system detects an obstacle, the motors will stop and reverse the 164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE motion for a brief period. Should this occur, remove the obstacle and press the button again, for the desired position. To Fold Third Row Seats Manually — If Equipped 1. Lower the head restraint to its full down position. 2. Pull release strap marked “1” located on the rear of the seat to lower the seatback. 3. Pull release strap marked “2” to release the anchors. Folding Third Row Seat Strap 4. Pull release strap marked “3” and tumble the seat rearward into the storage bin. To Unfold Third Row Seats 1. Pull up on the assist strap to lift the seat out of the storage bin and push the seat forward until the anchors latch. 2. Pull release strap marked “1” to unlock the recliner. 3. Pulling strap “3” releases the seatback to return to its full upright position. 4. Adjust the head restraint to the desired position. WARNING! In a collision, you or others in your vehicle could be injured if seats are not properly latched to their floor attachments. Always be sure the seats are fully latched. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 Tailgate Mode 1. Pull release strap “2”, then pull release strap “3” to rotate the entire seat rearward. Tailgate Positioning Release Straps 2 and 3 2. To restore the seat to its upright position, lift up on the seatback and push forward until the anchors latch. 166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! To avoid serious injury or death, NEVER operate the vehicle with occupants in the third row seat while in the tailgate mode. DRIVER MEMORY SEAT SYSTEM — IF EQUIPPED Once programmed the Memory Buttons 1 and 2 on the driver’s door panel can be programmed to recall the driver’s seat, driver’s outside mirror, adjustable brake and accelerator pedals, and radio station preset settings. Your Remote Keyless Entry (RKE) transmitters can also be programmed to recall the same positions when the UNLOCK button is pressed. Driver Memory Seat Switch Your vehicle may have been delivered with two RKE transmitters. Only one RKE transmitter can be linked to each of the memory positions. Setting Memory Positions And Linking RKE Transmitter To Memory NOTE: Each time the SET (S) button and a numbered button (1 or 2) is pressed, you erase the memory settings for that button and store a new one. 1. Insert the ignition key and turn the ignition switch to the ON position. 2. Press the driver door Memory button number 1 if you are setting the memory for driver 1, or button number 2 if you are setting the memory for driver 2. The system will recall any stored settings. Wait for the system to complete the memory recall before continuing to Step 3. 3. Adjust the driver’s seat, recliner, and driver’s side- view mirror to the desired positions. 4. Adjust the brake and accelerator pedals to the desired positions. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 5. Turn on the radio and set the radio station presets (up to 10 AM and 10 FM stations can be set). 6. Turn the ignition switch to the OFF position and remove the key. 7. Press and release the SET (S) button located on the driver’s door. 8. Within five seconds, press and release Memory button 1 or 2 on the driver’s door. The next step must be performed within 10 seconds if you desire to also use a RKE transmitter to recall memory positions. 9. Press and release the LOCK button on one of the RKE transmitters. 10. Insert the ignition key and turn the ignition switch to the ON position. 168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE (EVIC). Refer Information Center 11. Select ⬙Remote Linked to Memory⬙ in the Electronic Vehicle to the “Customer-Programmable Features” in the “Electronic Vehicle Information Center (EVIC)” section for more information. 12. Repeat the above steps to set the next Memory position using the other numbered Memory button or to link another RKE transmitter to memory. Memory Position Recall NOTE: The vehicle must be in PARK to recall memory positions. If a recall is attempted when the vehicle is not in PARK, a message will be displayed in the EVIC. To recall the memory settings for driver one, press Memory button 1 on the driver’s door or the UNLOCK button on the RKE transmitter linked to memory position 1. To recall the memory setting for driver two, press Memory button 2 on the driver’s door or the UNLOCK button on the RKE transmitter linked to Memory Position 2. A recall can be cancelled by pressing any of the memory buttons on the driver’s door during a recall (S, 1, or 2). When a recall is cancelled, the driver’s seat, driver’s mirror, and the pedals stop moving. A delay of one second will occur before another recall can be selected. To Disable RKE Transmitter Linked to Memory 1. Turn the ignition switch to the OFF position and remove the key. 2. Press and release Memory button 1. The system will recall any memory settings stored in position 1. Wait for the system to complete the memory recall before continu- ing to Step 3. 3. Press and release the memory SET (S) button located on the driver’s door. A chime will sound signaling that you are in the memory set mode. 4. Within five seconds, press and release Memory button 1 on the driver’s door. A chime will sound signaling to you that the driver memory has been set. 5. Within five seconds, press and release the UNLOCK button on the RKE transmitter. A chime will sound signaling to you that the RKE transmitter link has been successfully disabled. To disable another RKE transmitter linked to either Memory Position, repeat Steps 1 to 5 for each RKE transmitter. NOTE: Once programmed, all RKE transmitters linked to memory can be easily enabled or disabled at one time. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 Refer to the Remote Linked to Memory ⬙Customer- Programmable Features⬙ in the Electronic Vehicle Infor- mation Center (EVIC) for more information. Easy Entry/Exit Seat (Available with Memory Seat ONLY) This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. The distance the driver seat moves depends on where you have the driver seat positioned when you remove the key from the ignition switch. • When you remove the key from the ignition switch, the driver seat will move about 2.4 in (60 mm) rearward if the driver seat position is greater than or equal to 2.7 in (67.7 mm) forward of the rear stop. The seat will return to its previously set position when you insert the key into the ignition switch and turn it out of the LOCK position. 170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When you remove the key from the ignition switch the driver seat will move to a position 0.3 in (7.7 mm) forward of the rear stop if the driver seat position is between 0.9 – 2.7 in (22.7 – 67.7 mm) forward of the rear stop. The seat will return to its previously set position when you insert the key into the ignition switch and turn it out of the LOCK position.

Boost Classifieds - Car Advice, Reviews, Events & Classifieds

2009 Dodge Caravan Owners Manual