Login- Download PDF Manual
-
Punctured Tire Follow the directions closely for correct sealant usage.
1. Selector Switch (Sealant/Air or
Air Only)
2. On/Off Button
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (70,1)
10-70
Vehicle Care
3. Pressure Gauge 4. Pressure Deflation Button 5. Tire Sealant Canister 6. Sealant/Air Hose (Clear) 7. Air Only Hose (Black) 8. Power Plug 9. Canister Release Button (Under
Sealant/Air Hose)
When using the tire sealant and compressor kit during cold temperatures, warm the kit in a heated environment for five minutes. This will help to inflate the tire faster. If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning flashers. See Hazard Warning Flashers on page 6‑6. See If a Tire Goes Flat on page 10‑66 for other important safety warnings.
Do not remove any objects that have penetrated the tire. 1. Remove the tire sealant and
compressor kit from its storage location. See Storing the Tire Sealant and Compressor Kit on page 10‑75.
2. Unwrap the sealant/air hose (6)
and the power plug (8).
3. Place the kit on the ground.
Make sure the tire valve stem is positioned close to the ground so the hose will reach it.
4. Remove the valve stem cap from the flat tire by turning it counterclockwise.
5. Attach the sealant/air hose (6) onto the tire valve stem. Turn it clockwise until it is tight.
6. Plug the power plug (8) into the
accessory power outlet in the vehicle. Unplug all items from other accessory power outlets. See Power Outlets on page 5‑7. If the vehicle has an accessory power outlet, do not use the cigarette lighter. If the vehicle only has a cigarette lighter, use the cigarette lighter. Do not pinch the power plug cord in the door or window.
7. Start the vehicle. The vehicle
must be running while using the air compressor.
8. Press and turn the selector
switch (1) counterclockwise to the Sealant + Air position.
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (71,1)
9. Press the on/off button (2) to
turn the tire sealant and compressor kit on. The compressor will inject sealant and air into the tire. The pressure gauge (3) will initially show a high pressure while the compressor pushes the sealant into the tire. Once the sealant is completely dispersed into the tire, the pressure will quickly drop and start to rise again as the tire inflates with air only.
Inflate the tire to the recommended inflation pressure using the pressure gauge (3). The recommended inflation pressure can be found on the Tire and Loading Information label. See Tire Pressure on page 10‑50.
10.
The pressure gauge (3) may read higher than the actual tire pressure while the compressor is on. Turn the compressor off to get an accurate pressure reading. The compressor may be turned on/off until the correct pressure is reached.
Notice: If the recommended pressure cannot be reached after approximately 25 minutes, the vehicle should not be driven farther. The tire is too severely damaged and the tire sealant and compressor kit cannot inflate the tire. Remove the power plug from the accessory power outlet and unscrew the inflating hose from the tire valve. See Roadside Service (Mexico) on page 13‑7 or Roadside Service (U.S. and Canada) on page 13‑10. 11. Press the on/off button (2) to
turn the tire sealant and compressor kit off.
Vehicle Care
10-71
The tire is not sealed and will continue to leak air until the vehicle is driven and the sealant is distributed in the tire, therefore, Steps 12–18 must be done immediately after Step 11. Be careful while handling the tire sealant and compressor kit as it could be warm after usage.
12. Unplug the power plug (8) from
the accessory power outlet in the vehicle.
13. Turn the sealant/air hose (6)
counterclockwise to remove it from the tire valve stem.
14. Replace the tire valve
stem cap.
15. Replace the sealant/air hose
(6), and the power plug (8) back in their original location.
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (72,1)
10-72
Vehicle Care
16.
If the flat tire was able to inflate to the recommended inflation pressure, remove the maximum speed label from the sealant canister (5) and place it in a highly visible location. Do not exceed the speed on this label until the damaged tire is repaired or replaced.
17. Return the equipment to its
18.
original storage location in the vehicle. Immediately drive the vehicle 8 km (5 mi) to distribute the sealant in the tire.
19. Stop at a safe location and
check the tire pressure. Refer to Steps 1–11 under “Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured).” If the tire pressure has fallen more than 68 kPa (10 psi) below the recommended inflation pressure, stop driving the vehicle. The tire is too severely damaged and the tire sealant cannot seal the tire. See Roadside Service (Mexico) on page 13‑7 or Roadside Service (U.S. and Canada) on page 13‑10. If the tire pressure has not dropped more than 68 kPa (10 psi) from the recommended inflation pressure, inflate the tire to the recommended inflation pressure.
20. Wipe off any sealant from the
wheel, tire, and vehicle.
21. Dispose of the used sealant canister (5) and sealant/air hose (6) assembly at a local dealer or in accordance with local state codes and practices.
22. Replace with a new canister assembly available from your dealer.
23. After temporarily sealing the tire using the tire sealant and compressor kit, take the vehicle to an authorized dealer within 161 km (100 mi) of driving to have the tire repaired or replaced.
Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured) To use the air compressor to inflate a tire with air only and not sealant:
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (73,1)
3. Pressure Gauge 4. Pressure Deflation Button 5. Tire Sealant Canister 6. Sealant/Air Hose (Clear) 7. Air Only Hose (Black) 8. Power Plug 9. Canister Release Button (Under
Sealant/Air Hose)
If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning flashers. See Hazard Warning Flashers on page 6‑6. See If a Tire Goes Flat on page 10‑66 for other important safety warnings. 1. Remove the tire sealant and
compressor kit from its storage location. See Storing the Tire Sealant and Compressor Kit on page 10‑75.
2. Unwrap the air only hose (7) and
the power plug (8).
Vehicle Care
10-73
3. Place the kit on the ground.
Make sure the tire valve stem is positioned close to the ground so the hose will reach it.
4. Remove the tire valve stem cap
from the flat tire by turning it counterclockwise.
5. Attach the air only hose (7) onto
the tire valve stem by turning it clockwise until it is tight.
6. Plug the power plug (8) into the
accessory power outlet in the vehicle. Unplug all items from other accessory power outlets. See Power Outlets on page 5‑7. If the vehicle has an accessory power outlet, do not use the cigarette lighter. If the vehicle only has a cigarette lighter, use the cigarette lighter. Do not pinch the power plug cord in the door or window.
7. Start the vehicle. The vehicle
must be running while using the air compressor.
1. Selector Switch (Sealant/Air or
Air Only)
2. On/Off Button
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (74,1)
10-74
Vehicle Care
8. Press and turn the selector
switch (1) clockwise to the Air Only position.
9. Press the on/off button (2) to
turn the compressor on. The compressor will inflate the tire with air only.
10.
Inflate the tire to the recommended inflation pressure using the pressure gauge (3). The recommended inflation pressure can be found on the Tire and Loading Information label. See Tire Pressure on page 10‑50. The pressure gauge (3) may read higher than the actual tire pressure while the compressor is on. Turn the compressor off to get an accurate reading. The compressor may be turned on/ off until the correct pressure is reached.
If you inflate the tire higher than the recommended pressure you can adjust the excess pressure by pressing the pressure deflation button (4) until the proper pressure reading is reached. This option is only functional when using the air only hose (7).
11. Press the on/off button (2) to
turn the tire sealant and compressor kit off. Be careful while handling the tire sealant and compressor kit as it could be warm after usage.
12. Unplug the power plug (8) from
the accessory power outlet in the vehicle.
13. Disconnect the air only hose
(7) from the tire valve stem, by turning it counterclockwise, and replace the tire valve stem cap.
14. Replace the air only hose (7)
and the power plug (8) and cord back in its original location.
15. Place the equipment in the
original storage location in the vehicle.
The tire sealant and compressor kit has an accessory adapter located in a compartment on the bottom of its housing that may be used to inflate air mattresses, balls, etc.
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (75,1)
Removal and Installation of the Sealant Canister To remove the sealant canister: 1. Unwrap the sealant hose. 2. Press the canister release
button (9).
3. Pull up and remove the canister. 4. Replace with a new canister which is available from your dealer.
5. Push the new canister into
place.
Storing the Tire Sealant and Compressor Kit To access the tire sealant and compressor kit: 1. Open the trunk. See Trunk on
page 2‑14.
2. Lift the cover.
3. Remove the strap. 4. Remove the tire sealant and
compressor kit.
To store the tire sealant and compressor kit, reverse the steps.
Vehicle Care
10-75
Jump Starting For more information about the vehicle battery, see Battery on page 10‑26. If the battery has run down, try to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps to do it safely.
{ WARNING
Batteries can hurt you. They can be dangerous because:
. They contain acid that can
burn you.
. They contain gas that can
explode or ignite.
. They contain enough electricity to burn you.
If you do not follow these steps exactly, some or all of these things can hurt you.
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (76,1)
10-76
Vehicle Care
Notice: Ignoring these steps could result in costly damage to the vehicle that would not be covered by the warranty. Trying to start the vehicle by pushing or pulling it will not work, and it could damage the vehicle.
1. Good Battery Positive Post 2. Good Battery Negative Post 3. Discharged Battery Positive Post 4. Discharged Battery Negative
Grounding Point
The jump start positive post (1) and negative post (2) are on the battery of the vehicle providing the jump start. The jump start positive post (3) and the negative grounding point (4) for the discharged battery are on the passenger side of the vehicle. The positive jump start connection for the discharged battery is under a red cover. Remove the cover to expose the terminal. 1. Check the other vehicle. It must
have a 12-volt battery with a negative ground system.
Notice: Only use a vehicle that has a 12-volt system with a negative ground for jump starting. If the other vehicle does not have a 12-volt system with a negative ground, both vehicles can be damaged. 2. Position the two vehicles so that
they are not touching.
3. Set the parking brake firmly and
put the shift lever in P (Park) with an automatic transmission, or Neutral with a manual transmission. See Shifting Into Park (Automatic Transmission) on page 9‑21 with an automatic transmission, or Parking on page 9‑23 with a manual transmission.
Notice: If any accessories are left on or plugged in during the jump starting procedure, they could be damaged. The repairs would not be covered by the vehicle warranty. Whenever possible, turn off or unplug all accessories on either vehicle when jump starting the vehicle. 4. Set the ignition to OFF. Turn off
all lights and accessories in both vehicles, except the hazard warning flashers if needed.
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (77,1)
{ WARNING
An electric fan can start up even when the engine is not running and can injure you. Keep hands, clothing and tools away from any underhood electric fan.
{ WARNING
Using a match near a battery can cause battery gas to explode. People have been hurt doing this, and some have been blinded. Use a flashlight if you need more light. Be sure the battery has enough water. You do not need to add water to the battery installed in your new vehicle. But if a battery has filler caps, be sure the right amount of fluid is there. If it is low, (Continued)
WARNING (Continued)
add water to take care of that first. If you do not, explosive gas could be present. Battery fluid contains acid that can burn you. Do not get it on you. If you accidentally get it in your eyes or on your skin, flush the place with water and get medical help immediately.
{ WARNING
Fans or other moving engine parts can injure you badly. Keep your hands away from moving parts once the engine is running.
5. Connect one end of the red
positive (+) cable to the positive (+) terminal on the discharged battery.
Vehicle Care
10-77
6. Connect the other end of the
red positive (+) cable to the positive (+) terminal of the good battery.
7. Connect one end of the black
negative (–) cable to the negative (–) terminal of the good battery.
8. Connect the other end of the
black negative (–) cable to the negative (–) grounding point for the discharged battery.
9. Start the engine in the vehicle with the good battery and run the engine at idle speed for at least four minutes.
10. Try to start the vehicle that had
the dead battery. If it will not start after a few tries, it probably needs service.
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (78,1)
10-78
Vehicle Care
Notice: If the jumper cables are connected or removed in the wrong order, electrical shorting may occur and damage the vehicle. The repairs would not be covered by the vehicle warranty. Always connect and remove the jumper cables in the correct order, making sure that the cables do not touch each other or other metal.
Jumper Cable Removal Reverse the sequence exactly when removing the jumper cables.
Towing
Towing the Vehicle Notice: Incorrectly towing a disabled vehicle may cause damage. The damage would not be covered by the vehicle warranty. Do not lash or hook to the chassis components including the front and rear subframes, suspension control arms and links during towing and recovery of a disabled vehicle or to secure the vehicle to a flatbed car carrier. Use the proper nylon strap harnesses around the tires to secure the flatbed car carrier. Have the vehicle towed on a flatbed car carrier. A wheel lift tow truck could damage the vehicle. Consult your dealer or a professional towing service if the disabled vehicle must be towed. Use the tow eye for towing a disabled vehicle or loading it onto a flatbed car carrier.
Notice: Improper use of the tow eye can cause vehicle damage. Use caution and low speeds to prevent damage to the vehicle. Carefully open the cover in the front or rear fascia by using the small notch that conceals the tow eye socket. Install the tow eye into the socket by turning it clockwise until it stops. When the tow eye is removed, reinstall the cover with the notch in the original position. To tow the vehicle behind another vehicle for recreational purposes, such as behind a motor home, see “Recreational Vehicle Towing” in this section.
Recreational Vehicle Towing Recreational vehicle towing means towing the vehicle behind another vehicle – such as behind a motorhome. The two most common types of recreational vehicle towing
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (79,1)
are known as dinghy towing and dolly towing. Dinghy towing is towing the vehicle with all four wheels on the ground. Dolly towing is towing the vehicle with two wheels on the ground and two wheels up on a device known as a dolly. Here are some important things to consider before recreational vehicle towing: . What is the towing capacity
of the towing vehicle? Be sure to read the tow vehicle manufacturer's recommendations.
. What is the distance that will be
traveled? Some vehicles have restrictions on how far and how long they can tow. Is the proper towing equipment going to be used? See your dealer or trailering professional for additional advice and equipment recommendations.
Vehicle Care
10-79
Is the vehicle ready to be towed? Just as preparing the vehicle for a long trip, make sure the vehicle is prepared to be towed.
Dinghy Towing
Notice: If the vehicle is towed with all four wheels on the ground, the drivetrain components could be damaged. The repairs would not be covered by the vehicle warranty. Do not tow the vehicle with all four wheels on the ground. The vehicle was not designed to be towed with all four wheels on the ground. If a rear-wheel-drive vehicle must be towed, a dolly or a trailer should be used. If an all-wheel-drive vehicle must be towed, a trailer should be used. See “Dolly Towing” following for more information.
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (80,1)
4. Put the vehicle in P (Park) for an
automatic transmission or in 1 (First) for a manual transmission.
5. Securely attach the vehicle
being towed to the dolly.
6. Clamp the steering wheel in a straight-ahead position with a clamping device designed for towing.
7. Turn the ignition to LOCK/OFF. Dolly Towing (All-Wheel-Drive Vehicles)
10-80
Vehicle Care
Dolly Towing (Rear-Wheel-Drive Vehicles)
Use the following procedure to dolly tow a rear-wheel-drive vehicle from the rear: 1. Attach the dolly to the tow vehicle following the dolly manufacturer's instructions.
2. Put the rear wheels on the dolly. 3. Firmly set the parking brake.
See Parking Brake (Electric) on page 9‑30 or Parking Brake (Manual) on page 9‑33.
Notice: Towing an all-wheel-drive vehicle with all four wheels on the ground, or even with only two of its wheels on the ground, will damage drivetrain components. Do not tow an all-wheel-drive vehicle with any of its wheels on the ground. All-wheel-drive vehicles can only be towed with all four wheels on a trailer.
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (81,1)
Appearance Care
Exterior Care
Locks Locks are lubricated at the factory. Use a de-icing agent only when absolutely necessary, and have the locks greased after using. See Recommended Fluids and Lubricants. Washing the Vehicle To preserve the vehicle's finish, wash it often and out of direct sunlight. Notice: Do not use petroleum-based, acidic, or abrasive cleaning agents as they can damage the vehicle's paint, metal, or plastic parts. If damage occurs, it would not be covered by the vehicle's warranty. Approved cleaning products can be obtained from your dealer.
Follow all manufacturer directions regarding correct product usage, necessary safety precautions, and appropriate disposal of any vehicle care product. Notice: Avoid using high-pressure washes closer than 30 cm (12 in) to the surface of the vehicle. Use of power washers exceeding 8,274 kPa (1,200 psi) can result in damage or removal of paint and decals. Rinse the vehicle well, before washing and after, to remove all cleaning agents completely. If they are allowed to dry on the surface, they could stain. Dry the finish with a soft, clean chamois or an all-cotton towel to avoid surface scratches and water spotting.
Vehicle Care
10-81
Finish Care Application of aftermarket clearcoat sealant/wax materials is not recommended. If painted surfaces are damaged, see your dealer to have the damage assessed and repaired. Foreign materials such as calcium chloride and other salts, ice melting agents, road oil and tar, tree sap, bird droppings, chemicals from industrial chimneys, etc., can damage the vehicle's finish if they remain on painted surfaces. Wash the vehicle as soon as possible. If necessary, use non-abrasive cleaners that are marked safe for painted surfaces to remove foreign matter. Occasional hand waxing or mild polishing should be done to remove residue from the paint finish. See your dealer for approved cleaning products.
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (82,1)
10-82
Vehicle Care
Do not apply waxes or polishes to uncoated plastic, vinyl, rubber, decals, simulated wood, or flat paint as damage can occur. Notice: Machine compounding or aggressive polishing on a basecoat/clearcoat paint finish may damage it. Use only non-abrasive waxes and polishes that are made for a basecoat/ clearcoat paint finish on the vehicle. To keep the paint finish looking new, keep the vehicle garaged or covered whenever possible.
Protecting Exterior Bright Metal Moldings Notice: Failure to clean and protect the bright metal moldings can result in a hazy white finish or pitting. This damage would not be covered by the vehicle warranty.
The bright metal moldings on the vehicle are aluminum. To prevent damage always follow these cleaning instructions: . Be sure the molding is cool to the touch before applying any cleaning solution.
. Use a cleaning solution
approved for aluminum. Some cleaners are highly acidic or contain alkaline substances and can damage the moldings.
. Always dilute a concentrated
cleaner according to the manufacturer’s instructions.
. Do not use chrome cleaners. . Do not use cleaners that are not
intended for automotive use.
. Use a nonabrasive wax on the vehicle after washing to protect and extend the molding finish.
Cleaning Exterior Lamps/ Lenses and Emblems Use only lukewarm or cold water, a soft cloth, and a car washing soap to clean exterior lamps, lenses and emblems. Follow instructions under "Washing the Vehicle" in this section. Windshield and Wiper Blades Clean the outside of the windshield with glass cleaner. Clean rubber blades using a lint-free cloth or paper towel soaked with windshield washer fluid or a mild detergent. Wash the windshield thoroughly when cleaning the blades. Bugs, road grime, sap, and a buildup of vehicle wash/wax treatments may cause wiper streaking. Replace the wiper blades if they are worn or damaged. Damage can be caused by extreme dusty conditions, sand, salt, heat, sun, snow, and ice.
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (83,1)
Weatherstrips Apply silicone grease on weatherstrips to make them last longer, seal better, and not stick or squeak. Lubricate weatherstrips once a year. Black marks from rubber material on painted surfaces can be removed by rubbing with a clean cloth. See Recommended Fluids and Lubricants on page 11‑13. Tires Use a stiff brush with tire cleaner to clean the tires. Notice: Using petroleum-based tire dressing products on the vehicle may damage the paint finish and/or tires. When applying a tire dressing, always wipe off any overspray from all painted surfaces on the vehicle.
Wheels and Trim — Aluminum or Chrome Use a soft, clean cloth with mild soap and water to clean the wheels. After rinsing thoroughly with clean water, dry with a soft, clean towel. A wax may then be applied. Notice: Chrome wheels and other chrome trim may be damaged if the vehicle is not washed after driving on roads that have been sprayed with magnesium, calcium, or sodium chloride. These chlorides are used on roads for conditions such as ice and dust. Always wash the chrome with soap and water after exposure. Notice: To avoid surface damage, do not use strong soaps, chemicals, abrasive polishes, cleaners, brushes, or cleaners that contain acid on aluminum or chrome-plated wheels. Use only approved cleaners. Also, never drive a vehicle with aluminum or chrome-plated wheels through an
Vehicle Care
10-83
automatic car wash that uses silicone carbide tire cleaning brushes. Damage could occur and the repairs would not be covered by the vehicle warranty. Steering, Suspension, and Chassis Components Visually inspect the front and rear suspension and steering system for damaged, loose, or missing parts or signs of wear. Inspect the power steering for proper hook-up, binding, leaks, cracks, chafing, etc. Visually check constant velocity joints, rubber boots, and axle seals for leaks. Body Component Lubrication Lubricate all key lock cylinders, hood hinges, liftgate hinges, and the steel fuel door hinge unless the components are plastic. Applying silicone grease on weatherstrips with a clean cloth will make them last longer, seal better, and not stick or squeak.
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (84,1)
10-84
Vehicle Care
Underbody Maintenance Use plain water to flush dirt and debris from the vehicle's underbody. Your dealer or an underbody car washing system can do this. If not removed, rust and corrosion can develop. Sheet Metal Damage If the vehicle is damaged and requires sheet metal repair or replacement, make sure the body repair shop applies anti-corrosion material to parts repaired or replaced to restore corrosion protection. Original manufacturer replacement parts will provide the corrosion protection while maintaining the vehicle warranty. Finish Damage Quickly repair minor chips and scratches with touch-up materials available from your dealer to avoid
corrosion. Larger areas of finish damage can be corrected in your dealer's body and paint shop. Chemical Paint Spotting Airborne pollutants can fall upon and attack painted vehicle surfaces causing blotchy, ring-shaped discolorations, and small, irregular dark spots etched into the paint surface.
Interior Care To prevent dirt particle abrasions, regularly clean the vehicle's interior. Immediately remove any soils. Note that newspapers or dark garments that can transfer color to home furnishings can also permanently transfer color to the vehicle's interior. Use a soft bristle brush to remove dust from knobs and crevices on the instrument cluster. Using a mild soap solution, immediately remove
hand lotions, sunscreen, and insect repellent from all interior surfaces or permanent damage may result. Your dealer may have products for cleaning the interior. Use cleaners specifically designed for the surfaces being cleaned to prevent permanent damage. Apply all cleaners directly to the cleaning cloth. Do not spray cleaners directly on any switches or controls. Cleaners should be removed quickly. Never allow cleaners to remain on the surface being cleaned for extended periods of time. Cleaners may contain solvents that can become concentrated in the interior. Before using cleaners, read and adhere to all safety instructions on the label. While cleaning the interior, maintain adequate ventilation by opening the doors and windows.
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (85,1)
Interior Glass To clean, use a terry cloth fabric dampened with water. Wipe droplets left behind with a clean dry cloth. Commercial glass cleaners may be used, if necessary, after cleaning the interior glass with plain water. Notice: To prevent scratching, never use abrasive cleaners on automotive glass. Abrasive cleaners or aggressive cleaning may damage the rear window defogger. Notice: Cleaning the windshield with water during the first three to six months of ownership will reduce tendency to fog. Speaker Covers Vacuum around a speaker cover gently, so that the speaker will not be damaged. Clean spots with just water and mild soap.
Vehicle Care
10-85
Coated Moldings Coated moldings should be cleaned. . When lightly soiled, wipe with a
sponge or soft lint-free cloth dampened with water.
. When heavily soiled, use warm
soapy water.
Fabric/Carpet/Suede Start by vacuuming the surface using a soft brush attachment. If a rotating brush attachment is being used during vacuuming, only use it on the floor carpet. Before cleaning, gently remove as much of the soil as possible using one of the following techniques: . Gently blot liquids with a paper towel. Continue blotting until no more soil can be removed. For solid soils, remove as much as possible prior to vacuuming.
To prevent damage, do not clean the interior using the following cleaners or techniques: . Never use a razor or any other
sharp object to remove a soil from any interior surface.
. Never use a brush with stiff
bristles.
. Never rub any surface
aggressively or with excessive pressure.
. Do not use laundry detergents
or dishwashing soaps with degreasers. For liquid cleaners, use approximately 20 drops per 3.78 L (1 gal) of water. A concentrated soap solution will leave a residue that creates streaks and attracts dirt. Do not use solutions that contain strong or caustic soap.
. Do not heavily saturate the upholstery when cleaning.
. Do not use solvents or cleaners
containing solvents.
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (86,1)
10-86
Vehicle Care
To clean: 1. Saturate a clean lint-free
colorfast cloth with water or club soda. Microfiber cloth is recommended to prevent lint transfer to the fabric or carpet.
2. Remove excess moisture by
gently wringing until water does not drip from the cleaning cloth. 3. Start on the outside edge of the
soil and gently rub toward the center. Fold the cleaning cloth to a clean area frequently to prevent forcing the soil in to the fabric.
4. Continue gently rubbing the soiled area until there is no longer any color transfer from the soil to the cleaning cloth. If the soil is not completely removed, use a mild soap solution followed only by club soda or plain water.
5.
If the soil is not completely removed, it may be necessary to use a commercial upholstery cleaner or spot lifter. Test a small hidden area for colorfastness before using a commercial upholstery cleaner or spot lifter. If ring formation occurs, clean the entire fabric or carpet. Following the cleaning process, a paper towel can be used to blot excess moisture. Cleaning High Gloss Surfaces and Vehicle Information and Radio Displays For vehicles with high gloss surfaces or vehicle displays, use a microfiber cloth to wipe surfaces. Before wiping the surface with the microfiber cloth, use a soft bristle brush to remove dirt that could scratch the surface. Then use the
microfiber cloth by gently rubbing to clean. Never use window cleaners or solvents. Periodically hand wash the microfiber cloth separately, using mild soap. Do not use bleach or fabric softener. Rinse thoroughly and air dry before next use. Notice: Do not attach a device with a suction cup to the display. This may cause damage and would not be covered by the warranty. Instrument Panel, Leather, Vinyl, and Other Plastic Surfaces Use a soft microfiber cloth dampened with water to remove dust and loose dirt. For a more thorough cleaning, use a soft microfiber cloth dampened with a mild soap solution.
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (87,1)
Vehicle Care
10-87
Care of Safety Belts Keep belts clean and dry. { WARNING
Do not bleach or dye safety belts. It may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water.
Notice: Soaking or saturating leather, especially perforated leather, as well as other interior surfaces, may cause permanent damage. Wipe excess moisture from these surfaces after cleaning and allow them to dry naturally. Never use heat, steam, spot lifters, or spot removers. Do not use cleaners that contain silicone or wax-based products. Cleaners containing these solvents can permanently change the appearance and feel of leather or soft trim and are not recommended. Do not use cleaners that increase gloss, especially on the instrument panel. Reflected glare can decrease visibility through the windshield under certain conditions.
Notice: Use of air fresheners may cause permanent damage to plastics and painted surfaces. If an air freshener comes in contact with any plastic or painted surface in the vehicle, blot immediately and clean with a soft cloth dampened with a mild soap solution. Damage caused by air fresheners would not be covered by the vehicle warranty. Cargo Cover and Convenience Net Wash with warm water and mild detergent. Do not use chlorine bleach. Rinse with cold water, and then dry completely.
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (88,1)
10-88
Vehicle Care
Floor Mats
{ WARNING
If a floor mat is the wrong size or is not properly installed, it can interfere with the pedals. Interference with the pedals can cause unintended acceleration and/or increased stopping distance which can cause a crash and injury. Make sure the floor mat does not interfere with the pedals.
Use the following guidelines for proper floor mat usage.
The original equipment floor mats were designed for your vehicle. If the floor mats need replacing, it is recommended that GM certified floor mats be purchased. Non-GM floor mats may not fit properly and may interfere with the pedals. Always check that the floor mats do not interfere with the pedals. . Use the floor mat with the
correct side up. Do not turn it over.
. Do not place anything on top of
the driver side floor mat.
. Use only a single floor mat on
the driver side.
. Do not place one floor mat on
top of another.
The driver side floor mat is held in place by button-type retainers.
Removing and Replacing the Floor Mats
1. Pull up on the rear of the floor mat to unlock the retainers and remove.
2. Reinstall by lining up the floor mat retainer openings over the carpet retainers and snap into position.
3. Make sure the floor mat is properly secured in place.
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (1,1)
Service and Maintenance
11-1
Recommended Fluids, Lubricants, and Parts
Recommended Fluids and
Lubricants . . . . . . . . . . . . . . . . . 11-13
Maintenance Replacement
Parts . . . . . . . . . . . . . . . . . . . . . . 11-15
Maintenance Records
Maintenance Records . . . . . . 11-16
Service and Maintenance
General Information
General Information . . . . . . . . . . 11-1
Cadillac Premium Care Maintenance
Cadillac Premium Care
Maintenance . . . . . . . . . . . . . . . 11-3
Maintenance Schedule
Maintenance Schedule . . . . . . . 11-3
Special Application Services
Special Application
Services . . . . . . . . . . . . . . . . . . . . 11-9
Additional Maintenance and Care
Additional Maintenance
and Care . . . . . . . . . . . . . . . . . . 11-10
General Information Your vehicle is an important investment. This section describes the required maintenance for the vehicle. Follow this schedule to help protect against major repair expenses resulting from neglect or inadequate maintenance. It may also help to maintain the value of the vehicle if it is sold. It is the responsibility of the owner to have all required maintenance performed. Your dealer has trained technicians who can perform required maintenance using genuine replacement parts. They have up‐to‐date tools and equipment for fast and accurate diagnostics. Many dealers have extended evening and Saturday hours, courtesy transportation, and online scheduling to assist with service needs.
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (2,1)
11-2
Service and Maintenance
Your dealer recognizes the importance of providing competitively priced maintenance and repair services. With trained technicians, the dealer is the place for routine maintenance such as oil changes and tire rotations and additional maintenance items like tires, brakes, batteries, and wiper blades. Notice: Damage caused by improper maintenance can lead to costly repairs and may not be covered by the vehicle warranty. Maintenance intervals, checks, inspections, recommended fluids, and lubricants are important to keep the vehicle in good working condition. The Tire Rotation and Required Services are the responsibility of the vehicle owner. It is recommended to have your dealer perform these services every 12 000 km/7,500 mi. Proper vehicle maintenance helps to keep the vehicle in good working condition, improves fuel economy, and reduces vehicle emissions.
Because of the way people use vehicles, maintenance needs vary. There may need to be more frequent checks and services. The Additional Required Services ‐ Normal are for vehicles that: . Carry passengers and cargo within recommended limits on the Tire and Loading Information label. See Vehicle Load Limits on page 9‑11.
. Are driven on reasonable road
surfaces within legal driving limits.
. Use the recommended fuel. See
Recommended Fuel on page 9‑64.
Refer to the information in the Maintenance Schedule Additional Required Services ‐ Normal chart. The Additional Required Services ‐ Severe are for vehicles that are: . Mainly driven in heavy city traffic
in hot weather.
. Mainly driven in hilly or
mountainous terrain.
Frequently towing a trailer.
. Used for high speed or
competitive driving.
. Used for taxi, police, or delivery
service.
Refer to the information in the Maintenance Schedule Additional Required Services ‐ Severe chart.
{ WARNING
Performing maintenance work can be dangerous and can cause serious injury. Perform maintenance work only if the required information, proper tools, and equipment are available. If they are not, see your dealer to have a trained technician do the work. See Doing Your Own Service Work on page 10‑4.
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (3,1)
Cadillac Premium Care Maintenance Your vehicle comes with the Cadillac Premium Care Maintenance. It is a maintenance program that covers select maintenance services during the first 4 years or 80 000 km (50,000 mi), whichever comes first. Cadillac Premium Care Maintenance covers routine maintenance services, when scheduled in accordance with the owner manual, including: . Oil changes based on the
vehicle's oil life monitor system. Tire rotation every 12 000 km (7,500 mi).
Service and Maintenance
11-3
. Engine air cleaner filter
replacement.
. Passenger compartment air filter
replacement.
. Multi‐point vehicle inspection
(MPVI) performed by a qualified technician.
Cadillac requires that all Cadillac Premium Care Maintenance services be performed by a Cadillac authorized service dealer.
Maintenance Schedule
Owner Checks and Services
At Each Fuel Stop . Check the engine oil level. See
Engine Oil on page 10‑11.
Once a Month . Check the tire inflation
pressures. See Tire Pressure on page 10‑50. Inspect the tires for wear. See Tire Inspection on page 10‑56.
. Check the windshield washer
fluid level. See Washer Fluid on page 10‑23.
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (4,1)
11-4
Service and Maintenance
Engine Oil Change When the CHANGE ENGINE OIL SOON message displays, have the engine oil and filter changed within the next 1 000 km/600 mi. If driven under the best conditions, the engine oil life system might not indicate the need for vehicle service for more than a year. The engine oil and filter must be changed at least once a year and the oil life system must be reset. Your trained dealer technician can perform this work. If the engine oil life system is reset accidentally, service the vehicle within 5 000 km/3,000 mi since the last service. Reset the oil life system when the oil is changed. See Engine Oil Life System on page 10‑13.
Tire Rotation and Required Services Every 12 000 km/ 7,500 mi Rotate the tires, if recommended for the vehicle, and perform the following services. See Tire Rotation on page 10‑57. . Check engine oil level and oil
life percentage. If needed, change engine oil and filter, and reset oil life system. See Engine Oil on page 10‑11 and Engine Oil Life System on page 10‑13.
. Check engine coolant level. See Engine Coolant on page 10‑18. . Check windshield washer fluid
level. See Washer Fluid on page 10‑23.
. Visually inspect windshield wiper
blades for wear, cracking, or contamination. See Exterior Care on page 10‑81. Replace worn or damaged wiper blades. See Wiper Blade Replacement on page 10‑30.
. Check tire inflation pressures.
See Tire Pressure on page 10‑50. Inspect tire wear. See Tire Inspection on page 10‑56.
. Visually check for fluid leaks.
Inspect engine air cleaner filter. See Engine Air Cleaner/Filter on page 10‑16. Inspect brake system.
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (5,1)
. Visually inspect steering, suspension, and chassis components for damaged, loose, or missing parts or signs of wear. See Exterior Care on page 10‑81.
. Check restraint system
components. See Safety System Check on page 3‑18.
. Visually inspect fuel system for
damage or leaks.
. Visually inspect exhaust system
and nearby heat shields for loose or damaged parts. Lubricate body components. See Exterior Care on page 10‑81.
Service and Maintenance
11-5
. Check starter switch. See Starter
. Check accelerator pedal for
Switch Check on page 10‑28. . Check automatic transmission shift lock control function. See Automatic Transmission Shift Lock Control Function Check on page 10‑29.
. Check ignition transmission lock.
See Ignition Transmission Lock Check on page 10‑29.
. Check parking brake and
automatic transmission park mechanism. See Park Brake and P (Park) Mechanism Check on page 10‑29.
damage, high effort, or binding. Replace if needed.
. Visually inspect gas strut for
signs of wear, cracks, or other damage. Check the hold open ability of the strut. See your dealer if service is required. . Check tire sealant expiration
date, if equipped. See Tire Sealant and Compressor Kit on page 10‑67. Inspect sunroof track and seal, if equipped. See Sunroof on page 2‑23.
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (6,1)
11-6
Service and Maintenance
Additional Required Services
Maintenance Schedule Additional Required Services - Normal
Rotate tires and perform Required Services. Check engine oil level and oil life percentage. Change engine oil and filter, if needed.
@ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @
Replace passenger compartment air filter. (1)
Inspect evaporative control system. (2)
Replace engine air cleaner filter. (3)
Except 2.0L Engine: Replace spark plugs. Inspect spark plug wires.
2.0L Engine Only: Replace spark plugs. Inspect spark plug wires.
Change automatic transmission fluid. Change
filter if serviceable.
Change transfer case fluid, if equipped with
AWD. (4)
Change rear axle fluid, if equipped with limited
slip differential.
Drain, flush, and fill engine cooling system. (5)
Visually inspect accessory drive belts. (6)
Replace brake fluid. (7)
Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
Black plate (7,1)
Service and Maintenance
11-7
(6) Or every 10 years, whichever comes first. Inspect for fraying, excessive cracking, or damage; replace, if needed. (7) Or every 10 years, whichever comes first.
(3) Or every four years, whichever comes first. (4) Do not directly power wash the transfer case output seals. High
