Login- Download PDF Manual
-
2. The selected destination can be edited:
> To start the destination guidance: Select "Start guidance" and press the controller. the destination guidance switched on
is displayed with
> To display information on the desti-
nation: Select "Information on destination" and press the controller
> To edit the entry:
Select "Edit" and press the control- ler, for operation, refer to Entering city of destination or zip code, page 117
> To delete the entry:
Select "Delete entry" and press the controller
> To delete all entries:
Select "Delete list" and press the controller; destination guidance is switched off
119
4. Select the city or country and press the
controller: > "On destination" > "On location" > "On a new destination"
The display for entering a city appears on the Control Display. Select the desired city and press the controller
5. Select the desired type of destination, such as "Hotels and restaurants" and press the controller. The Control Display shows > an alphabetical list of all entries in the selected destination category
> for the location, a list sorted by dis- tance with a maximum of ten desti- nations
6. Select a destination and press the con-
troller
7. Select a menu item:
> To adopt the address into the desti-
nation list: Select "Select as destination" and press the controller. The destination guidance is switched on
> To set up a telephone connection: Select "Call" and press the control- ler.
To exit the menu: Select
and press the controller.
Recent destinations The system stores the last 20 destinations entered.
> To store the entry:
Select "Add to address book" and press the controller.
3. Select "Store address" and press the
controller. The entry is stored in the address book.
Address book
Calling up the address book Control Center, for principle details, refer to page 16:
Selecting destinations from the address book Control Center, for principle details, refer to page 16: 1. Select "Address book" and press the
controller.
Select "Address book" and press the con- troller.
The stored entries are listed on the Control Display
Storing destinations in the address book To make it even easier to enter frequently required destinations, the system lets you store approx. 100 destinations in the address book. Control Center, for principle details, refer to page 16: 1. Enter the destination manually, refer to
page 116, and press the controller
2. Select "Add to address book" and
press the controller. The entry is assigned to a name that can be changed. For operation, refer to Entering a destination manually, page 116
120
2. Select the entry and press the control-
ler.
To start the destination guidance: Select "Start guidance" and press the con- troller.
Editing destinations from the address book You can change the name of an entry. Control Center, for principle details, refer to page 16: 1. Select "Address book" and press the
controller
2. Select the entry and press the controller 3. Select "Edit address" and press the
controller. The given name can be changed. For operation, refer to Entering a destina- tion manually, page 116.
Deleting individual destinations from the address book Control Center, for principle details, refer to page 16:
1. Select "Address book" and press the
controller
2. Select the entry and press the controller 3. Select "Delete address" and press the
controller.
Deleting all destinations from the address book Control Center, for principle details, refer to page 16: 1. Open the menu 2. Select "Vehicle settings" and press the
controller
3. Select "Delete data" and press the con-
troller
4. Select "Delete address book" and press
the controller
5. Select "Yes" and press the controller.
Route selection You can specify your route more precisely by choosing certain route criteria.
Changing route criteria Control Center, for principle details, refer to page 16: 1. Select "Navigation" and press the con-
troller
2. Select "Route preference" and press
the controller.
The various possibilities are listed on the Control Display
3. Select the route criteria and press the
controller: > "Fastest route"
Shortest time using combination of smallest possible distance and sec- tions where fast driving is possible
> "Shortest route"
Shortest distance without consider- ation of the time
> "Avoid freeways / tolls"
Freeways are avoided where possi- ble
> "With freeways"
Freeways and major traffic arteries are given priority
4.
If necessary, select an additional route criterion and press the controller: > "Avoid tollroads"
Tollroads are avoided where possi- ble
> "Avoid ferries"
Ferries are avoided where possible
> "Dynamic route"
The route is planned around or through traffic obstructions.
displays the selected route criteria.
and press the controller.
To close the list: Select The navigation system relies on specific rules to determine your route. These vary according to the different kinds of roads stored on the map CD/DVD. As a result, the routes recommended by the navigation system may not always be the same ones that you would choose based on personal experience.
121
You can change the selected route as often as you like, both when entering your desti- nation and at any time while the system is guiding you to it – the system revises its travel recommendations accordingly.
Wordmatch principle The system supports the wordmatch prin- ciple to make it easier for you to enter the names of streets or towns. The system runs ongoing checks, comparing your destina- tion entries with the data stored on the nav- igation CD/DVD as the basis for instant response. The user benefits include: > Names of specific locations can also
vary from the official versions provided that the spelling of the entry corre- sponds to a standard form used in another country Example: Instead of 'München', you can also enter the English spelling 'Munich' or the Italian spelling 'Monaco'
> When you are entering the names of
towns and streets the system will com- plete them automatically as soon as enough letters are available to ensure unambiguous identification
> The system only accepts name entries beginning with letters that are stored on the navigation CD/DVD. The system will not accept nonexistent names and addresses.
122
Destination guidance
Starting the destination guidance Control Center, for principle details, refer to page 16: 1. Select "Navigation" and press the con-
troller
2. Select a destination and press the con-
troller
3. Select "Start guidance" and press the
is displayed with the
controller. destination guidance switched on. indicates the current destination.
After the route has been calculated, desti- nation guidance is indicated by arrows or a route map on the Control Display.
1 Time of arrival 2 Distance to destination 3 Route criteria 4 Voice instructions switched on/off During destination guidance, you can oper- ate other equipment using the Control Cen- ter at any time. You are informed of a required change in direction by means of spoken announcements in good time prior to every intersection. To exit the menu: Select
and press the controller.
Displaying route You have the option of displaying various views of the route.
Switching to directional arrow mode To switch to directional arrow mode: 1. Select "Navigation" and press the con-
troller
2. Select "Map, arrow display" and press
the controller.
123
i
Selecting display of route map You can also select a map showing your travel route while the system is guiding you to your destination. 1. Select "Navigation" and press the con-
troller
2. Select "Map, facing north" and press
the controller.
Changing scale Turn the controller. The map scale appears on the Control Dis- play.
Altering display direction At scales of less than 300 miles/500 km, you enjoy the option of deciding whether to orient the map to north or toward your cur- rent direction of travel. From 300 miles/ 500 km, the map always points toward north. Select "Map, facing north" or "Map, direc- tion of travel" and press the controller.
Displaying towns and streets of the route You can have streets and towns on your route displayed whenever the destination guidance is active. The distances remaining to be traveled on each individual road, directional arrows and traffic jam reports are also displayed. Control Center, for principle details, refer to page 16:
124
Select "Route list" and press the controller. If the system has not yet completely defined the travel route, "..." will appear in the list. To exit the menu: Select
and press the controller.
Destination guidance through voice instructions
Switching voice instructions on/off The setting is made in dependence on a specific key. Control Center, for principle details, refer to page 16: 1. Open the menu 2. Select "Display settings" and press the
controller
3. Select "Languages" and press the con-
troller
4. Select "Navigation voice instructions
on" and press the controller. played with the voice instructions switched on
is dis-
or press
or press
on the steering wheel for a longer period. Programing button functions, refer to page 44.
Repeating an instruction To repeat the last voice instruction:
or press
2. Turn the button during an instruction to
select the desired volume.
The navigation system's voice guidance will continue to issue instructions at this volume level, even if the radio is set to min- imum volume.
on the steering wheel briefly. Programing button functions, refer to page 44.
Suppressing voice instructions To prevent the navigation system from interrupting other audio sources, such as a news program or traffic bulletin, you can deactivate the voice instructions. During an instruction, press
Blocking sections of a route During destination guidance you can revise the navigation system's route recommen- dations to avoid particular stretches of road. Enter the number of miles/kilometers that you want to travel before returning to the original route. Control Center, for principle details, refer to page 16:
or press
on the steering wheel briefly. Programing button functions, refer to page 44.
Adjusting volume You can adjust the volume of the voice instructions for each specific key: 1. To repeat the last voice instruction, if
required:
or press
on the steering wheel briefly.
1. Select "New route" and press the con-
troller
2. Turn the controller to enter the desired number of miles/kilometers and press the controller. To exit from the menu without changing the route: Select
and press the controller
3. "Calculate" is used to recalculate the
route.
125
i
Traffic information
Calling up traffic information Control Center, for principle details, refer to page 16:
Terminating/continuing destination guidance Control Center, for principle details, refer to page 16:
1. Select "Traffic Info" and press the con-
2.
troller. A list of the current traffic obstructions appears on the Control Display If appropriate, select an entry and press the controller. Detailed information on the traffic obstruction is listed.
To exit the menu: Select
and press the controller.
Bypass traffic congestion 1. Select "Detour" and press the controller 2. Select "Yes" and press the controller. The navigation system determines a new route that bypasses the traffic congestion and then returns to the original route.
indicates the current destination.
1. Select the current destination and press
the controller
2. Select "Start guidance" and press the
controller. is displayed when the destination guidance is terminated.
The system suspends active destination guidance, including voice instructions, until reactivated. When you park the vehicle before reaching the entered destination, upon restarting you will see the question "Continue guid- ance to dest.?". "Yes" switches the desti- nation guidance on again. This menu item cannot be selected using the voice command system.
126
What to do if …
What to do if … > you request the current position of your
vehicle, but do not receive a precise display? The system is unable to receive enough GPS signals at your current position owing to obstructions, your position is not yet available on your navigation CD/ DVD, or the system is in the process of calculating your position. As a rule, por- table communications GSM/GPS reception is guaranteed under a clear sky
> the destination guidance does not
adopt a destination? The data of the destination is not stored on the navigation CD/DVD that is loaded. Select a destination that is as close as possible to the original
> the destination guidance does not
adopt an address without the street name? On the navigation CD/DVD, no down- town area can be determined for the city or town entered. Enter any street, or a destination such as the railway sta- tion etc., then start the destination guid- ance
> you want to enter a destination for the destination guidance system, but it is not possible to select the letters for your desired entry? The destination data is not recorded on the navigation CD/DVD that is loaded. In this case, the system will not offer you any letters to choose from. Select a destination that is as close as possible to the original
> the system stops furnishing directions on which way to turn as you approach intersections? You are driving in an area that has not yet been completely recorded on the navigation CD/DVD. Instead of an arrow indicating a turn, you will see an arrow which indicates the general direction of
your planned route. Or you have left the recommended route and the system requires a few seconds to calculate a new recommended route
> the battery has been disconnected?
It will take approx. 15 minutes for the system to resume operation.
127
Entertainment
All operating options for radio and CD, and the tone settings, are described in this chapter.
e
On/off, tone
Depending on the equipment options you have chosen, the following audio sources are available: > Radio Business > CD player > CD changer. The following section summarizes the com- mon controls and setting options for the audio sources. Thereafter, the individual audio sources are described in detail.
Controls The audio sources can be operated using: > The center console > The Control Center > Buttons on the steering wheel, refer to
page 11.
Operation using the center console The layout of the buttons can vary depend- ing on your vehicle's equipment.
1 To operate audio sources > Press: switching on/off.
The system selects the last audio source used, radio or CD
> Turn: adjusting volume
2 Drive for audio CD 3 Eject CD 4 Station scan/track search
> Change the station > Select music track for CD
130
Operation using the Control Center Control Center, for principle details, refer to page 16:
1. Open the start menu by pressing the
button
2. Move the controller backwards to open
"Entertainment".
> "FM" and "AM"
Selecting waveband, storing and calling up stations
> "WB"
Opening Weather Band station
> "SAT"
Selecting satellite radio
> "CD"
Selecting CD player or CD changer
> "Set"
Updating stations with best reception, storing stations, setting the tone, play- ing stations or tracks.
> Reset:
Resets the tone settings to their stan- dard default settings.
Changing tone Control Center, for principle details, refer to page 16:
1. Open the start menu by pressing the
button
2. Open the menu by pressing the con-
troller
3. Select "Entertainment settings" and
press the controller
4. Select "Audio" and press the controller. The tone settings can also be selected if you have opened "Entertainment": Select "Set" and then "Audio" and press the controller each time.
Operating temperatures
The system is configured for operat- ing temperatures of 57/–156 to 1407/+606. Outside this temperature range, malfunctions can occur.<
Care instructions You can find everything you need to know on this topic by consulting the separate Caring for your vehicle brochure.
Switching on/off Press button 1, refer to page 130.
Adjusting the volume
Adjusting the volume for audio sources The setting is made in dependence on a specific key. Turn button 1 until the desired volume has been reached.
Tone control You can change the following tone settings in dependence on a specific key: > Treble > Bass > Balance:
Right/left volume balance
> Fader:
Front/rear volume balance
> Speed volume:
Raises the volume with increasing speed
> LOGIC7 spatial sound*:
Improvement in spatial acoustics in all frequency ranges
> Equalizer*:
Setting individual frequency ranges to include spatial acoustics
131
Treble and bass 1. Select "Treble / Bass" and press the
Speed-dependent volume 1. Select "Speed volume" and press the
controller
controller
2. Move the controller to the left or right to
2. Turn the controller to make the adjust-
select "Treble" or "Bass"
ment
3. Turn the controller. The adjustment is
3. Press the controller. The adjustment is
adopted; the field can be changed.
adopted; the field can be changed.
Balance and fader 1. Select "Balance / Fader" and press the
controller
Spatial sound effect Professional LOGIC7* 1. Select "LOGIC7" and press the control-
ler
2. Move the controller to the left or right to
select "Balance" or "Fader"
3. Turn the controller. The adjustment is
adopted; the field can be changed.
2. Select "Audio" and press the controller.
LOGIC7 spatial sound is switched on.
To switch off LOGIC7 spatial sound: Select "Off" and press the controller. LOGIC7 and the LOGIC7 logo are regis- tered trade marks of Lexicon, Inc., a com- pany of the Harman International Group.
132
Equalizer* 1. Select "Equalizer" and press the con-
troller
2. Move the controller to the left or right to
select the desired frequency range
3. Turn the controller. The adjustment is
adopted; the field can be changed.
Resetting the tone settings You can reset all tone settings except "Speed volume" to the standard default settings. 1. Open the menu 2. Select "Entertainment settings" and
press the controller
3. Select "Audio" and press the controller
4. Select "Reset" and press the controller.
133
i
Radio
Your radio provides reception of the FM and AM wavebands.
Listening to the radio To switch on the radio:
Press the button. Control Center, for principle details, refer to page 16:
1. Open the start menu by pressing the
button
2. Move the controller backwards to open
"Entertainment"
3. Select "FM" or "AM" and press the con-
troller. Stations are shown on the Control Dis- play on the basis of various selection criteria, e.g. "Presets"
4. Change stations by turning the control-
ler.
If no station is displayed, update the sta- tions with the best reception, refer to page 135. You can choose from the following selec- tion criteria: > Autostore:
The six strongest stations, refer to page 135 > "Presets":
Twelve stations you have previously stored, refer to page 136.
134
To switch between the different selection criteria of stations: 1. Move the controller forwards to change
"Scan" and press the controller. This cancels the scan search, and the radio remains on the current station.
the field
2. Select the selection criterion and press
the controller.
Changing stations using buttons in the center console
Press to the desired direction briefly. The system switches to the next station.
Scanning and selecting stations The scan search feature automatically plays a brief sample from each station in the selected waveband. Control Center, for principle details, refer to page 16: 1. Select "FM" or "AM" and press the con-
troller
2. Press the controller to display a list of
additional menu items
3. Select "Scan" and press the controller.
The scan search starts
4. Select a station:
Press the controller again, select
Buttons in the center console: 1. To start scan:
Press for longer. The scan search starts.
2. To select a station:
Press.
Manual station selection You look for a certain frequency. Control Center, for principle details, refer to page 16: 1. Select "FM"or "AM" and press the con-
troller
2. Move the controller forwards to change
the field
3. Select "Manual" and press the control-
ler
4. Turn the controller until the desired fre-
quency is selected.
Updating the stations with the best reception If you are on a longer journey and leave the transmission range of the stations originally set, you can update the list of stations with the best reception from the AM or FM waveband.
135
i
Control Center, for principle details, refer to page 16: 1. Select "FM" or "AM" and press the con-
troller
2. Move the controller forwards to change
the field
3. Select "Autostore" of the desired wave-
band and press the controller
4. Press the controller to display a list of
additional menu items
5. Select "Autostore" and press the con-
troller. The list of stations with the best recep- tion is updated; the frequencies of the stations are displayed.
Manual tuning You can listen to stations that are received in addition to those displayed. Control Center, for principle details, refer to page 16: 1. Select "FM" or "AM" and press the con-
troller
2. Move the controller forwards to change
fields
3. Select "Manual" and press the control-
ler
4. To start scan:
Maintain pressure on the button for sev- eral seconds. The scan mode begins with the cur- rently selected frequency. The system plays a brief sample from each radio station.
To stop the station scan at the desired frequency or station:
Press button.
Storing stations The setting is made in dependence on a specific key. Control Center, for principle details, refer to page 16: 1. Select "FM" or "AM" and press the con-
troller
2. Move the controller forwards to change
the field
3. Select the selection criterion and press
the controller > "Manual" > Autostore of the waveband
4. Select the desired station 5. Press the controller to display a list of
additional menu items
6. Select "Store" and press the controller.
"Presets" is displayed
7. Turn the controller until the desired
memory location is selected.
Buttons in the center console:
136
The number of the memory location appears beside the name or frequency of the station. Press the controller to store the station.
The previous selection criterion is dis- played again after a short time.
Radio Data System RDS The Radio Data System RDS broadcasts additional information in the FM waveband. RDS stations have the following properties: > In the case of broadcasting networks
that transmit over a number of frequen- cies, there is an automatic switch to the frequency with the best reception qual- ity
> If the reception conditions are good, the station names are shown on the Control Display. If the reception is weak or dis- rupted, it can take some time before the station names appear.
Weather Band* Weather Radio is a service of the National Oceanic and Atmospheric Administration – NOAA – of the U.S. Department of Com- merce. Weather messages are repeated every four to six minutes and are routinely revised every one to three hours, or more frequently if needed. Most of the stations operate 24 hours daily. During severe weather, National Weather Service fore- casters can interrupt the routine weather broadcasts and substitute special warning messages. If you have a question concern- ing NOAA Weather Radio, please contact your nearest National Weather Service Office, or write to National Weather Service – Attn: W/OM11–, National Oceanic and Atmospheric Administration, 1325 East- West Highway Silver Spring, MD. 20910.
Selecting Weather Band Control Center, for principle details, refer to page 16: 1. Select "WB" and press the controller
2. Select the Weather Band station and
press the controller.
The Weather Band station may not be available in some regions.
137
i
Satellite radio* You can receive up to 100 different chan- nels with high tone quality. You can listen to one of these channels free of charge at any time to obtain a first impression. The channel is marked with To listen to additional channels of your choice, you must have these channels acti- vated.
You may experience signal drops and muting events related to this new
technology.<
Activating channels Control Center, for principle details, refer to page 16:
1. Open the start menu by pressing the
button
2. Move the controller backwards to open
"Entertainment"
3. Select "SAT" and press the controller
138
4. To enable, select "Call Sirius" and press
the controller
5. Turn the ignition key to position 0 and
wait at least 5 minutes.
Selecting and storing channel
1. Select "SAT" and press the controller.
Channels are shown on the Control Dis- play on the basis of various criteria
2. Select the menu item and press the
controller: > "Presets":
Up to twelve channels you have stored
> "All channels" > "Categories":
All channels by category, e.g. news, jazz
3.
If "Categories" was selected: Select the desired category and press the controller. The channels of this category are dis- played
1 Artist 2 Track 3 Album
Storing channel 1. Select desired channel 2. Press the controller to display a list of
additional menu items
4. Select a channel marked with this sym-
bol
5. Press the controller to display a list of
additional menu items
3. Select "Store" and press the controller.
"Presets" is displayed
6. Select "Play" and press the controller.
Additional information The name of the channel and additional information on the current track are dis- played, e.g. the name of the artist.
4. Turn the controller to select a memory
location and press the controller.
The channel is stored; the previous crite- rion appears after a short time.
139
i
Changing channel using buttons in the center console
Press to the desired direction briefly. The system switches to the next channel.
Notes When there is a signal blockage or the transmission is suspended momentarily for more than 4 seconds, a message appears on the Control Display.
Service may be interrupted or unavailable for specific reasons such
as environmental or topographic condi- tions and others that Satellite Radio cannot directly control. Signal may not be available under tunnels, in parking garages, next to tall buildings, nearby trees with dense foliage, nearby mountains or other possible strong sources of radio interference. Service should resume normally after the source of signal unavailability has been cleared.<
140
CD Compact Disc
Listening to CDs
Insert the CD. Playback starts automatically. Hold CDs by the edges; do not touch the reflecting CD memory surface. To start playback when there is already a CD in the drive: Control Center, for principle details, refer to page 16:
1. Open the start menu by pressing the
button
2. Move the controller backwards to open
"Entertainment"
3. Select "CD" and press the controller 4. On vehicles with a CD changer, select
"CD" and press the controller.
