Login- Download PDF Manual
-
Do not touch hot exhaust pipes; otherwise, there is the danger of getting burned.◀
100 mph/160 km/h.
Avoid full-throttle operation and use of the transmission's kickdown mode for the initial miles. From 1,200 miles/2,000 km The engine and vehicle speed can gradually be increased. Tires Due to technical factors associated with their manufacture, tires do not achieve their full trac‐ tion potential until after an initial breaking-in pe‐ riod. Drive conservatively for the first 200 miles/ 300 km. Brake system Brakes require an initial break-in period of ap‐ prox. 300 miles/500 km to achieve optimized contact and wear patterns between brake pads and discs. Drive moderately during this break-in period. Clutch The function of the clutch reaches its optimal level only after a distance driven of approx.
146
Online Edition for Part no. 01 40 2 606 469 - 03 11 490
Climate control windshield*
The marked area is not covered with heat re‐ flective coating. Use this area for garage door openers, devices for electronic toll collection, etc.
Climate control laminated tinted safety glass* The vehicle glass provides full protection against the harmful effects of UV radiation on the skin. Mobile communication devices in the vehicle
Mobile communication devices in the ve‐ hicle
It is advised that you do not use mobile commu‐ nication devices, e.g., mobile phones, inside the vehicle without connecting them directly to the external antenna. Otherwise, the vehicle elec‐ tronics and mobile communication devices can interfere with each other. In addition, there is no assurance that the radiation generated during transmission will be discharged from the vehicle interior.◀
Hydroplaning On wet or slushy roads, a wedge of water can form between the tires and road surface. This phenomenon is referred to as hydroplan‐ ing. It is characterized by a partial or complete loss of contact between the tires and the road surface, ultimately undermining your ability to steer and brake the vehicle.
Hydroplaning When driving on wet or slushy roads, re‐
duce your speed to prevent hydroplaning.◀
Driving through water Drive though calm water only if it is not deeper than 9.8 inches/25 cm and at this height, no faster than walking speed, up to 6 mph/10 km/h. Adhere to water depth and speed limita‐ tions
Do not exceed this water depth and walking speed; otherwise, the vehicle's engine, the elec‐ trical systems and the transmission may be damaged.◀
Braking safely Your vehicle is equipped with ABS as a standard feature. Applying the brakes fully is the most effective way of braking in situations when this is neces‐ sary. The vehicle maintains steering responsiveness. You can still avoid any obstacles with a minimum of steering effort. Pulsation of the brake pedal and sounds from the hydraulic circuits indicate that ABS is in its active mode. Objects in the area around the pedals No objects in the area around the pedals Keep floor mats, carpets, and any other objects out of the area of motion of the pedals; otherwise, the function of the pedals could be impeded while driving Do not place additional floor mats over existing mats or other objects. Only use floor mats that have been approved for the vehicle and can be properly fixed in place. Ensure that the floor mats are securely fastened again after they were removed for cleaning, for example.◀
Online Edition for Part no. 01 40 2 606 469 - 03 11 490
147
g
Driving in wet conditions When roads are wet or there is heavy rain, briefly exert gentle pressure on the brake pedal every few miles. Ensure that this action does not endanger other road users. The heat generated in this process helps dry the brake discs and pads. In this way braking efficiency will be available when you need it. Hills Drive long or steep downhill gradients in the gear in which the least braking is required. Otherwise, the brake system may overheat, resulting in a reduction in the brake system efficiency. Manual transmission: You can increase the engine's braking effect by shifting down, going all the way to first gear, if necessary. Automatic transmission*: You can increase the engine's braking effect by shifting down in the manual mode of the auto‐ matic transmission, refer to page 65.
Avoid load on the brakes Avoid placing excessive load on the brake system. Light but consistent brake pressure can lead to high temperatures, brake wear and pos‐ sibly even brake failure.◀
Do not drive in neutral Do not drive in neutral or with the engine stopped, as doing so disables engine braking. In addition, steering and brake assist is unavailable with the engine stopped.◀
Brake disc corrosion Corrosion on the brake discs and contamination on the brake pads are furthered by: ▷ Low mileage. ▷ Extended periods when the vehicle is not
used at all.
▷ Infrequent use of the brakes.
Corrosion occurs when the minimum pressure that must be exerted by the pads during brake applications to clean the discs is not reached. Should corrosion form on the brake discs, the brakes will tend to respond with a pulsating ef‐ fect that generally cannot be corrected. Condensation under the parked vehicle When using the automatic climate control, con‐ densation water develops that exits underneath the vehicle. Therefore, traces of condensed water under the vehicle are normal.
Loading
Overloading the vehicle To avoid exceeding the approved carrying capacity of the tires, never overload the vehicle. Overloading can lead to overheating and in‐ creases the rate at which damage develops in‐ side the tires. This could result in a sudden loss of tire inflation pressure.◀ No fluids in the trunk Make sure that fluids do not leak into the trunk; otherwise, the vehicle may be damaged.◀
Determining the load limit
1. Locate the following statement on your ve‐
hicle’s placard*: ▷ The combined weight of occupants and
cargo should never exceed XXX kg or YYY lbs. Otherwise, damage to the ve‐
148
Online Edition for Part no. 01 40 2 606 469 - 03 11 490
hicle and unstable driving situations may result.
2. Determine the combined weight of the
driver and passengers that will be riding in your vehicle.
3. Subtract the combined weight of the driver and passengers from XXX kilograms or YYY pounds.
4. The resulting figure equals the available
amount of cargo and luggage load capacity. For example, if the YYY amount equals 1,000 lbs and there will be four 150 lbs pas‐ sengers in your vehicle, the amount of avail‐ able cargo and luggage load capacity is 400 lbs: 1,000 lbs minus 600 lbs = 400 lbs. 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.
Load
The maximum load is the sum of the weight of the occupants and the cargo. The greater the weight of the occupants, the less cargo that can be transported.
Stowing cargo
▷ Heavy cargo: stow as far forward and as low as possible, ideally directly behind the cargo area separating wall.
▷ Very heavy cargo: when the rear seat is not occupied, secure each of the outer safety belts in the opposite buckle.
▷ Cover sharp edges and corners. ▷ If necessary, fold down the rear backrests to
stow cargo.
Securing cargo Lashing eyes in the cargo area
To secure the cargo, there are four lashing eyes in the cargo area Securing cargo ▷ Smaller and lighter items: secure with re‐ taining straps or with a cargo net* or draw straps.
▷ Larger and heavy objects: secure with cargo
straps*.
Cargo straps, cargo netting, retaining straps or draw straps on the lashing eyes in the cargo area.
Online Edition for Part no. 01 40 2 606 469 - 03 11 490
149
Securing cargo Always position and secure the cargo as described above; otherwise, it can endanger the car's occupants if sudden braking or swerving becomes necessary. Heavy or hard objects should not be carried loose inside the car; otherwise, they could be thrown around as a result of hard braking, sud‐ den swerves, etc., and endanger the occu‐ pants.◀
Roof-mounted luggage rack Note Roof racks are available as special accessories. Attachment Follow the installation instructions of the roof rack. Roof drip rail with flaps*
The anchorage points are located in the roof drip rail above the doors. Fold the cover outward.
Mounting Be sure that adequate clearance is maintained for raising and opening the glass sunroof*. Loading Because roof racks raise the vehicle's center of gravity when loaded, they have a major effect on vehicle handling and steering response. Therefore, note the following when loading and driving:
150
▷ Do not exceed the approved roof/axle loads and the approved gross vehicle weight, refer to page 283.
▷ Distribute the roof load uniformly. ▷ The roof load should not be too large in area. ▷ Always load the heaviest pieces on the bot‐
tom.
▷ Secure the roof luggage firmly, e.g., tie with
ratchet straps.
▷ Do not let objects project into the opening
path of the trunk lid.
▷ Drive smoothly. Avoid sudden acceleration and braking maneuvers. Take corners gen‐ tly.
Saving fuel General information Your vehicle contains advanced technology for the reduction of fuel consumption and emis‐ sions. Fuel consumption depends on a number of dif‐ ferent factors. The implementation of certain measures, driv‐ ing style and regular maintenance can have an influence on fuel consumption and on the envi‐ ronmental impact. Remove unnecessary cargo Additional weight increases fuel consumption. Remove attached parts following use Remove auxiliary mirrors, roof or rear luggage racks which are no longer required following use. Attached parts on the vehicle impair the aero‐ dynamics and increase the fuel consumption. Close the windows and glass sunroof* Driving with the glass sunroof and windows open results in increased air resistance and raises fuel consumption.
Online Edition for Part no. 01 40 2 606 469 - 03 11 490
Switch off the engine during longer stops Switch off the engine during longer stops, e.g., at traffic lights, railroad crossings or in traffic congestion. Fuel savings are achieved after the vehicle is switched off for only approx. 4 seconds. Switch off any functions that are not currently needed Functions such as seat heating and the rear win‐ dow defroster require a lot of energy and con‐ sume additional fuel, especially in city and stop- and-go traffic. Therefore, switch off these functions if they are not actually needed. Have maintenance carried out Have vehicles maintained regularly to achieve optimal vehicle economy and operating life. Have the maintenance carried out by your serv‐ ice center. Please also note the BMW Maintenance Sys‐ tem.
Check the tire inflation pressure regularly Check and, if necessary, correct the tire inflation pressure at least twice a month and before start‐ ing on a long trip. Low tire inflation pressure increases rolling re‐ sistance and thus raises fuel consumption and tire wear. Drive away without delay Do not wait for the engine to warm up while the vehicle remains stationary. Start driving right away, but at moderate engine speeds. This is the fastest way for the cold engine to reach its operating temperature. Look well ahead when driving Avoid unnecessary acceleration and braking. By maintaining a suitable distance to the vehicle driving ahead of you. Driving smoothly and looking ahead reduces fuel consumption. Avoid high engine speeds Use 1st gear to get the vehicle in motion. Be‐ ginning with 2nd gear, accelerate rapidly. When accelerating, shift up before reaching high en‐ gine speeds. When you reach the desired speed, shift into the highest applicable gear and drive with the en‐ gine speed as low as possible and at a constant speed. As a rule: driving at low engine speeds lowers fuel consumption and reduces wear. The gear shift indicator* of your vehicle indi‐ cates the most fuel efficient gear. Use coasting conditions When approaching a red light, take your foot off the accelerator and let the vehicle coast to a halt. On a downhill gradient, take your foot off the ac‐ celerator and let the vehicle roll. The flow of fuel is interrupted while coasting.
Online Edition for Part no. 01 40 2 606 469 - 03 11 490
151
Online Edition for Part no. 01 40 2 606 469 - 03 11 490
Navigation
This chapter contains various examples of how the navigation system can guide you reliably to your destination.
Online Edition for Part no. 01 40 2 606 469 - 03 11 490
n
Navigation* Navigation system General information The navigation system can determine the pre‐ cise position of the vehicle, with the aid of sat‐ ellites and vehicle sensors, and can reliably guide you to every entered destination. Navigation data are stored in the vehicle and can be updated.
Entries in stationary vehicle Enter data only when the vehicle is sta‐
tionary, and always give priority to the applicable traffic regulations in the event of any contradic‐ tion between traffic and road conditions and the instructions issued by the navigation system. Failure to take to this precaution can place you in violation of the law and put vehicle occupants and other road users in danger.◀
Destination input Manual destination entry General information The system supports you in entering street names and house numbers by automatically completing the entry and providing entry com‐ parisons, refer to page 21. Stored town/city and street names can be called up quickly. ▷ If the existing entries should not be changed, the entries for the state/province and town/ city can be skipped.
▷ Destination guidance is started to the town/
city center if no street is entered.
Entering a state/province 1. Press the MENU button. 2. "Navigation"
3. "Enter address"
4. Select "State/Province" or the displayed
state/province.
Entering a town/city 1. Select "Town/City/Postal Code" or the dis‐
played town/city.
2. Select letters, if necessary.
The list is narrowed down further with each entry.
3. Move the controller to the right. 4. Select the town/city name from the list. If there are several towns/cities with the same name: 1. Change to the list of town/city names. 2. Highlight the town/city. 3. Select the town/city. Entering the postal code* 1. Select "Town/City/Postal Code" or the dis‐
played town/city.
2.
Select the symbol.
154
Online Edition for Part no. 01 40 2 606 469 - 03 11 490
3. Select the numbers. 4. Change to the list of postal codes and towns/
cities.
5. Highlight the entry. 6. Selecting an entry. Entering a street and intersection 1. Select "Street" or the displayed street. 2. Enter a street and intersection in the same
way as you would enter a town/city.
If there are several streets with the same name: 1. Change to the list of street names. 2. Highlight the street. 3. Select the street. Alternative: enter the street address and house number 1. Select "Street" or the displayed street. 2. Enter the street as you would the town/city. 3. "House number" 4. Select the numbers. 5. Change to the list of house numbers. 6. Select a house number or range of house
numbers.
Street does not exist in the destination city/town The desired street does not exist in the specified city/town because it belongs to another part of the city/town. 1. "Navigation" 2. "Enter address" 3. Select "Street" or the displayed street. 4. Change to the list of street names. 5. Select "In" the displayed country.
All streets of the selected state/province are offered. The associated town/city is dis‐ played after the street name.
6. Select the letters. 7. Change to the list of street names. 8. Highlight the street. 9. Select the street. Starting destination guidance after entering the destination 1. "Accept destination" 2. "Start guidance" or "Add as another
destination" Add a destination as a further destination, refer to page 160.
Address book Selecting a destination from the address book 1. "Navigation" 2. "Address book"
Contacts with addresses are displayed if these have been checked as destinations. If the mobile phone* does not display the contacts with addresses, they must first be
Online Edition for Part no. 01 40 2 606 469 - 03 11 490
155
checked as a destination, refer to page 231.
3. "Store position as contact" or "Add position
to contact"
3. Select a contact in the list or, if desired, with
"A-Z search".
4. "Business address" or "Home address" Storing the destination in the address book After entering the destination, store the desti‐ nation in the address book. 1. Open "Options". 2. "Store as new contact" or "Add to existing
contact"
3. Select an existing contact, if available. 4. "Business address" or "Home address" 5. Enter "Last name" and, if necessary, "First
name".
6. "Store in vehicle" Storing the position The current position can be stored in the ad‐ dress book. 1. "Navigation" 2. Open "Options".
4. Depending on the selection, choose an ex‐ isting contact from the list. Select the type of address and enter the first and last name.
5. "Store in vehicle" Editing or deleting an address 1. "Navigation" 2. "Address book" 3. Highlight the entry. 4. Open "Options". 5. "Edit in Contacts" or "Delete entry" Using the home address as the destination The home address must be stored. Specify the home address, refer to page 230. 1. "Navigation" 2. "Address book" 3. "Home"
4. "Start guidance"
156
Online Edition for Part no. 01 40 2 606 469 - 03 11 490
Last destinations At a glance The destinations previously entered are stored automatically. The destinations can be called up and used as a destination for destination guidance. Calling up the last destination 1. "Navigation" 2. "Last destinations"
Starting destination guidance 1. "Navigation" 2. "Last destinations" 3. Select the destination. 4. "Start guidance" Editing the destination 1. "Navigation" 2. "Last destinations" 3. Highlight the destination. 4. Open "Options". 5. "Edit destination" Deleting the last destinations 1. "Navigation" 2. "Last destinations" 3. Highlight the destination. 4. Open "Options". 5. "Delete entry" or "Delete all last
destinations"
Special destinations Opening the search for special destinations To select special destinations, e.g., hotels or tourist attractions: 1. "Navigation" 2. "Points of Interest" 3. Select the search function.
Online Search* 1. "Google™ Search" 2. Select a special destination. 3. 4. "Start guidance"
Select the symbol.
A-Z search 1. "A-Z search" 2. "Town/City"
Select or enter the town/city.
3. "Category" 4. Select the category. 5. "Category details"
For some special destinations, multiple cat‐ egory details can be selected. Move the controller to the left to leave the category details.
6. "Keyword" 7. Enter the keyword.
A list of the special destinations is displayed.
8. Select a special destination.
Details are displayed. If multiple details are stored, you can leaf through the pages. If a phone number is available, a connection can be established if necessary.
9.
Select the symbol.
"Start guidance" or "Add as another destination" Add a destination as a further destination, refer to page 160.
Online Edition for Part no. 01 40 2 606 469 - 03 11 490
157
n
"Start search": if a search term is not entered, the search is repeated with the previous search term.
Category search 1. "Category search" 2. "Town/City"
Select or enter the town/city.
3. "Category" 4. Select the category. 5. "Category details"
For some special destinations, multiple cat‐ egory details can be selected. Move the controller to the left to leave the category details.
6. "Start search"
A list of the special destinations is displayed.
7. Select a special destination.
Details are displayed. If multiple details are stored, you can leaf through the pages. If a phone number is available, a connection can be established if necessary.
8.
Select the symbol.
"Start guidance" or "Add as another destination" Add a destination as a further destination, refer to page 160.
Display of special destinations List of special destinations: special destinations are organized by distance and are displayed with a directional arrow to the special destination. on the split screen, special destinations of the selected category are displayed in the map view as symbols. The display depends on the scale of the map and the category. Destination entry via BMW Assist* A connection is established to the Concierge service, refer to page 233.
1. "Navigation" 2. "Enter address" 3. Open "Options". 4. "BMW Assist dest. entry" Displaying special destinations in the map To display symbols of the special destinations in the map view: 1. "Navigation" 2. "Map" 3. Open "Options". 4. "Display Points of Interest" 5. Select the setting. Destination entry by map Selecting the destination 1. "Navigation" 2. "Map"
The current position of the vehicle is indi‐ cated on the map.
3.
"Interactive map"
4. Select the destination with crosshairs.
▷ To change the scale: turn the controller. ▷ To shift the map: move the controller in
the required direction.
▷ To shift the map diagonally: move the controller in the required direction and turn it.
158
Online Edition for Part no. 01 40 2 606 469 - 03 11 490
Specifying the street If the system does not recognize a street, one of the following is displayed: ▷ The name of a street in the vicinity. ▷ The county. ▷ The coordinates of the destination. Additional functions Additional functions are available on the inter‐ active map after the controller is pressed.
▷
Select the symbol.
"Start guidance" or "Add as another destination" Add a destination as a further destination, refer to page 160.
▷ "Exit interactive map": return to the map
view.
▷ "View in northern direction" or "View in
driving direction"
▷ "Display destination": the map section
around the destination is displayed.
▷ "Display current location": the map section around your current location is displayed.
▷ "Find points of interest": the search for spe‐
cial destinations is started.
Destination entry by voice* General information ▷ Instructions for voice activation system, re‐
fer to page 22.
▷ When making a destination entry by voice, you can change between voice operation and iDrive.
▷ To have the available spoken instructions
read out loud: ›Voice commands‹
Saying the entries ▷ the town/city, street, and house number can
be entered as a single command*.
▷ Countries, towns and cities, streets, and in‐ tersections can be said as whole words* or spelled in the language of the system, refer to page 79. Example: to enter a town/city in a US state as a whole word, the language of the system must be English.
▷ Spell the entry if the spoken language and
the language of the system differ.
▷ Say the letters smoothly, and avoid exag‐ gerating the pronunciation and inserting lengthy pauses between the letters.
▷ The options available for entering data de‐ pend on the navigation data and the country and language settings.
entering an address using a command*
1.
Press the button on the steering
wheel. ›Enter address‹
2. 3. Wait for a request from the system. 4. Say the address in the suggested order. 5. Continue making the entry as prompted by
the system.
If necessary, individually name the separate components of the address, e.g., the town/city. Entering a town/city separately The name of the town/city can be said as a word* or spelled out. With the destination entry menu displayed:
1.
Press the button on the steering
wheel. ›City‹ or ›Spell city‹.
2. 3. Wait for the system to prompt you for the
town/city.
Online Edition for Part no. 01 40 2 606 469 - 03 11 490
159
n
4. Say the name of the town/city, or say at least
the first three letters. Depending on the entry, up to 20 towns/cit‐ ies may be suggested.
5. Select the town/city.
▷ To select a recommended town/
city: ›Yes‹
▷ To select a different town/city: ›New
entry‹
▷ Select an entry: ›Entry ...‹ e.g., entry 2
▷ To spell an entry: ›Spell city‹6. Continue making the entry as prompted by
the system.
If there are several towns/cities with the same name: Towns/cities of the same name are grouped in a list and displayed as one location followed by an ellipsis. 1. Select an entry: ›Yes‹ or ›Entry ...‹ e.g., En‐
try 2.
2. Select the desired town/city. Entering a street or intersection separately Enter a street and intersection in the same way as you would enter a town/city. Entering a house number separately Depending on the data in the navigation system, house numbers up to number 2000 can be en‐ tered. 1. 2. Say the house number.
›House number‹
Say each digit separately.
3. Continue making the entry as prompted by
the system.
Planning a trip with intermediate destinations New trip A trip can be planned with several intermediate destinations.
160
1. "Navigation" 2. "Map" 3. Move the controller to the left if necessary. 4. 5. "Enter new destination" 6. Select the type of destination entry.
"Guidance"
7. Enter the intermediate destination. 8. "Start guidance" Entering intermediate destinations For a trip, a max. of 30 intermediate destinations can be entered. 1. "Enter new destination" 2. Select the type of destination entry. 3. Enter the intermediate destination. 4. "Add as another destination"
The intermediate destination is entered in the destination list and is highlighted.
5. Turn the controller until the intermediate
destination is located in the desired position in the list.
6. Press the controller. Starting the trip 1. After all intermediate destinations are en‐
tered, highlight the first destination. If the second destination, for example, is highlighted when destination guidance is started, the first destination is skipped.
2. "Start guidance"
This symbol marks the active leg of the
trip.
Online Edition for Part no. 01 40 2 606 469 - 03 11 490
Store the trip Up to 30 trips can be stored in the trip list. If necessary, delete existing trips to be able to store new trips. 1. Open "Options". 2. "Store trip" 3. Enter the name. 4. "OK" Select the stored trip 1. "Navigation" 2. "Stored trips" 3. Select a stored trip. 4. "Start guidance" Reversing the direction of travel Intermediate destinations are displayed in re‐ verse order in the list. 1. "Map" 2. 3. Open "Options". 4. "Reverse order of trip dest." Intermediate destination options 1. "Map" 2. 3. "Display all trip destinations" 4. Select an intermediate destination.
"Guidance"
"Guidance"
▷ "Edit destination" ▷ "Reposition dest. in the trip": move an intermediate destination to another po‐ sition in the list.
▷ "Delete dest. in the trip" ▷ "Go to next dest. in the trip"
Some options are not available for certain trips. Delete the stored trip 1. "Stored trips" 2. Highlight the desired trip. 3. Open "Options". 4. "Delete all trips" or "Delete trip"
With the Professional navigation system: Open the last trip 1. "Navigation" 2. "Stored trips" 3. "Last trip" 4. "Start guidance"
Destination guidance Starting destination guidance 1. "Navigation" 2. Make a destination entry, refer to page 154. 3. "Accept destination" 4. "Start guidance" ▷ The route is shown on the Control Display. ▷ The distance to the destination/intermedi‐ ate destination and the estimated time of ar‐ rival are displayed in the map view.
▷ The arrow view is shown in the instrument cluster, in the Head-up Display*, and on the Control Display where appropriate.
"Guidance"
Terminating destination guidance 1. "Navigation" 2. "Map" 3. 4. "Stop guidance" Continuing destination guidance If the destination was not reached during the last trip, destination guidance can be resumed. "Resume guidance" Route criteria General information ▷ The route calculated can be influenced by
selecting certain criteria.
▷ The route criteria can be changed when the destination is entered and during destina‐ tion guidance.
Online Edition for Part no. 01 40 2 606 469 - 03 11 490
161
n
▷ Road types are part of the navigation data and are taken into consideration when plan‐ ning a route, e.g., avoid highways.
▷ The recommended route may differ from the route you would take based on personal ex‐ perience.
▷ The settings are stored for the remote con‐
trol currently in use.
▷ Destination guidance with traffic bulletins,
refer to page 167.
Changing the route criteria 1. "Navigation" 2. "Map" 3. 4. Select the criterion:
"Route preference"
▷
▷
▷
"Fast route": time-optimized route, being a combination of the shortest pos‐ sible route and the fastest roads.
"Efficient route": optimized combi‐ nation of the fastest and shortest route.
"Short route": short distance, irre‐
spective of how fast or slow progress will be.
▷ "Alternative routes": if available, alter‐ native routes are suggested during ac‐ tive route guidance. The individual sug‐ gestions are highlighted in color.
5. Specify additional criteria for the route, if
necessary: ▷ "Avoid highways": highways are
avoided wherever possible.
▷ "Avoid toll roads": toll roads are avoided
wherever possible.
▷ "Avoid ferries": ferries are avoided
where possible.
Route Different views of the route are available during destination guidance: ▷ Arrow view in the instrument cluster and on
the Control Display.
▷ List of route sections. ▷ Map view, refer to page 163. ▷ Arrow view in the Head-up Display*, refer to
page 124. Arrow view The following information is displayed during destination guidance: ▷ Large arrow: current direction of travel. ▷ Small arrow: indicates the next change in di‐
rection.
▷ Intersection view. ▷ Lane information. ▷ Traffic bulletins. ▷ Distance to the next change in direction. ▷ Street name at the next change in direction. Lane information On multi-lane roads, the recommended lanes are marked in the arrow view by a triangle. ▷ Solid triangle: best lane. ▷ Empty triangle: possible lane. However, an‐ other lane change may be needed shortly.
Displaying list of route sections When the destination guidance is started, a list of route sections can be displayed. The driving distances and traffic bulletins are displayed for each route section. 1. "Navigation" 2. "Route information" 3. Mark route section.
The route section is displayed on the split screen.
162
Online Edition for Part no. 01 40 2 606 469 - 03 11 490
Bypassing a section of the route Calculate a new route for a route section. 1. "Navigation" 2. "Route information" 3. "New route for"
4. Turn the controller. Enter the number of kilo‐ meters within which you would like to return to the original route. 5. Press the controller. Resuming the original route If the route section should no longer be by‐ passed: 1. "Navigation" 2. "Route information" 3. "New route for:" 4. "Remove blocking" Gas station recommendation The remaining range is calculated, and if nec‐ essary gas stations along the route are dis‐ played. 1. "Navigation" 2. "Route information" 3. "Recommended refuel"
A list of the gas stations is displayed.
4. Highlight a gas station.
The position of the gas station is displayed on the split screen.
5. Select the gas station.
Select the symbol.
6. 7. "Start guidance": destination guidance to
the selected gas station is started. "Add as another destination": the gas sta‐ tion is added to the route.
"Voice instructions"
Switching spoken instructions on/off The setting is stored for the remote control cur‐ rently in use. 1. "Navigation" 2. "Map" 3.
Repeating spoken instructions 1. "Navigation" 2. "Map" 3. Highlight the symbol. 4. Press the controller twice. Volume of spoken instructions Turn the volume button while giving an instruc‐ tion until the desired volume is set. Saving the spoken instructions on the programmable memory buttons The function for switching the spoken instruc‐ tions on/off can be stored on a programmable memory button, refer to page 20, for quick ac‐ cess.
Map view Selecting the map view 1. "Navigation" 2. "Map"
Online Edition for Part no. 01 40 2 606 469 - 03 11 490
163
At a glance
1 Function bar 2 Route section with traffic obstruction 3 Traffic sign for traffic obstruction 4 Planned route 5 Current location 6 Upper status field 7 Lower status field Lines in the map Streets and routes are displayed in different col‐ ors and styles depending on their classification. Dashed lines represent railways and ferry con‐ nections. Country borders are indicated by thin lines. Traffic obstructions Small triangles along the planned route indicate route sections with traffic obstructions, depend‐ ing on the map scale. The direction of the trian‐ gles indicates the direction of the obstruction. The traffic signs indicate the significance of the obstruction. ▷ Red traffic sign: the obstruction affects the
planned route or direction.
▷ Gray traffic sign: the obstruction does not
affect the planned route or direction.
Traffic bulletins, refer to page 165. Planned route After destination guidance is started, the plan‐ ned route is displayed on the map. Status fields Show/hide: press the controller.
164
▷ Upper status field: time, telephone, and en‐
tertainment details.
▷ Lower status field: symbol for active desti‐ nation guidance, status of traffic bulletins, time of arrival, and distance to destination.
Function bar The following functions are available in the func‐ tion bar: Symbol
Function Start/end destination guidance. Switch spoken instructions on/ off.
Change the route criteria.
Search for a special destination. Display the traffic bulletins. Interactive map.
Set the map view. Change the scale.
To change to the function bar, move the con‐ troller to the left. Changing the map section
"Interactive map"
▷ To shift the map: move the controller in the
required direction.
▷ To shift the map diagonally: move the con‐ troller in the required direction and turn it.
Select the symbol.
Changing the scale 1. 2. To change the scale: turn the controller. Automatically scaled map scale In the map view facing north, turn the controller in any direction until the AUTO scale is dis‐ played. The map shows the entire route be‐ tween the current location and the destination.
Online Edition for Part no. 01 40 2 606 469 - 03 11 490
Settings for the map view The settings are stored for the remote control currently in use. 1. "Navigation" 2. "Map" 3. Open "Options". 4. "Settings" Set the map view. ▷ "Day/night mode"
Select and create the necessary settings depending on the light conditions. "Traffic conditions/gray map" active: the setting is disregarded.
▷ With the Professional navigation system:
"Satellite images" Depending on availability and resolution, satellite images* are displayed in a scale of approx. 1 mile to 600 miles/2 km to 1,000 km.
▷ "Perspective view in 3D"
Prominent areas that are contained in the navigation data are displayed on the map in 3D.
▷ "Traffic conditions/gray map"
The map is optimized for displaying traffic bulletins, refer to page 165. Symbols for the special destinations are no longer displayed.
Map view for split screen The map view can be selected for the split screen independently from the main screen. 1. Open "Options". 2. "Split screen" 3. Move the controller to the right repeatedly
until the split screen is selected.
4. Select "Split screen content" or the scale. 5. Select the map view. ▷ "Arrow display" ▷ "Map facing north" ▷ "Map direction of travel" ▷ "Map view with perspective"
▷ "Position" ▷ "Exit ramp view": selected blind drive‐ ways are displayed three dimensionally. Setting in some cases will affect the dis‐ play in the Head-Up Display*. ▷ "Traffic conditions/gray map"
6. To change the scale: select the split screen
and turn the controller.
Traffic bulletins* At a glance ▷ Display the traffic bulletins from radio sta‐ tions that broadcast the TI Traffic Informa‐ tion of a traffic information service. Informa‐ tion on traffic obstructions and hazards is updated continuously. Certain BMW models equipped with navi‐ gation have the capability to display real- time traffic information. If your system has this capability the following additional terms and conditions apply: An End-User shall no longer have the right to use the Traffic Data in the event that the End-User is in material breach of the terms and conditions contained herein. A. Total Traffic Network, a division of Clear Channel Broadcasting, Inc. (“Total Traffic Network”) holds the rights to the traffic in‐ cident data and RDS-TMC network through which it is delivered. You may not modify, copy, scan or use any other method to re‐ produce, duplicate, republish, transmit or distribute in any way any portion of traffic in‐ cident data. You agree to indemnify, defend and hold harmless BMW of North America, LLC. (“BMW NA”) and Total Traffic Net‐ work, Inrix, Inc (and their affiliates) against any and all claims, damages, costs or other expenses that arise directly or indirectly out of (a) your unauthorized use of the traffic in‐ cident data or the RDS-TMC network, (b) your violation of this directive and/or (c) any unauthorized or unlawful activities by you in connection herewith.
Online Edition for Part no. 01 40 2 606 469 - 03 11 490
165
