Download PDF Manual

Ventilation Front ventilation


▷ Lever for changing the air flow direction, ar‐


row 1.


▷ Thumbwheels for opening and closing the


vents continuously, arrows 2.


▷ Thumbwheel to vary the temperature, ar‐


row 3. Toward blue: colder. Toward red: warmer.


Adjusting the ventilation ▷ Ventilation for cooling:


Adjust the vent to direct the air in your di‐ rection, such as if the vehicle interior is hot from the sun.


▷ Draft-free ventilation:


Adjust the vent to let the air flow past you.


Climate control


Controls


Ventilation in the rear


▷ Thumbwheel for continuous opening and


closing of the vents, arrow 1.


▷ Thumbwheel to vary the temperature, ar‐


row 2. Toward blue: colder. Toward red: warmer.


▷ Lever for changing the air flow direction, ar‐


row 3.


Parked-car ventilation The concept The parked-car ventilation ventilates the vehicle interior and lowers its temperature, if necessary. The system can be switched on and off at any external temperature, either directly or by using two preset switch-on times. It remains switched on for 30 minutes. Open the vents to allow air to flow out. Operation can be performed via iDrive. Switching on/off directly 1. "Settings" 2. "Climate" 3. "Activate parked-car vent."


The symbol on the automatic climate control


flashes if the system is switched on.


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


143


Controls


Climate control


Preselecting the switch-on time 1. "Settings" 2. "Climate" 3. "Timer 1:" or "Timer 2:" 4. Set the desired time. Activating the switch-on time 1. "Settings" 2. "Climate" 3. "Activate Timer 1" or "Activate Timer 2"


The symbol on the automatic climate control lights up when the switch-on time is activated. The symbol on the automatic climate control flashes when the system has been switched on. The system will only be switched on within the next 24 hours. After that, it needs to reactivated.


144


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


Interior equipment Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.


Integrated universal remote control The concept The integrated universal remote control can op‐ erate up to 3 functions of remote-controlled sys‐ tems such as garage door drives or lighting sys‐ tems. The integrated universal remote control replaces up to 3 different hand-held transmit‐ ters. To operate the remote control, the buttons on the interior rearview mirror must be program‐ med with the desired functions. The hand-held transmitter for the particular system is required in order to program the remote control.


During programming During programming and before activat‐ ing a device using the integrated universal re‐ mote control, ensure that there are no people, animals, or objects in the range of movement of the remote-controlled device; otherwise, there is a risk of injury or damage. Also follow the safety instructions of the hand- held transmitter.◀ Before selling the vehicle, delete the stored functions for the sake of security. Compatibility


If this symbol is printed on the packaging or in the instructions of the system to be controlled, the system is generally com‐


Interior equipment


Controls


patible with the integrated universal remote control. If you have any questions, please contact: ▷ Your service center. ▷ www.homelink.com on the Internet. HomeLink is a registered trademark of Johnson Controls, Inc. Controls on the interior rearview mirror


▷ LED, arrow 1. ▷ Buttons, arrow 2. ▷ The hand-held transmitter, arrow 3, is re‐


quired for programming.


Programming General information 1. Switch on the ignition. 2.


Initial setup: Press and hold the left and right button on the interior rearview mirror simultaneously for approximately 20 seconds until the LED on the interior rearview mirror flashes. This erases all programming of the buttons on the interior rearview mirror.


3. Hold the hand-held transmitter for the sys‐ tem to be controlled approx. 1 to 3 in/2.5 to 8 cm away from the buttons on the interior


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


145


Controls


Interior equipment


rearview mirror. The required distance de‐ pends on the manual transmitter.


4. Simultaneously press and hold the button of the desired function on the hand-held trans‐ mitter and the button to be programmed on the interior rearview mirror. The LED on the interior rearview mirror will begin flashing slowly.


5. Release both buttons as soon as the LED


flashes more rapidly. When the LED is flash‐ ing faster, this indicates that the button on the interior rearview mirror has been pro‐ grammed. If the LED does not flash faster after at least 60 seconds, change the distance between the interior rearview mirror and the hand- held transmitter and repeat the step. Several more attempts at different distances may be necessary. Wait at least 15 seconds be‐ tween attempts. Canada: if programming with the hand-held transmitter was interrupted, hold down the interior rearview mirror button and repeat‐ edly press and release the hand-held trans‐ mitter button for 2 seconds.


6. To program other functions on other but‐


tons, repeat steps 3 to 5.


The systems can be controlled using the interior rearview mirror buttons. Special feature of the alternating-code wireless system If you are unable to operate the system after re‐ peated programming, please check if the sys‐ tem to be controlled features an alternating- code system. Read the system's operating manual, or press the programmed button on the interior rearview mirror longer. If the LED on the interior rearview mirror starts flashing rapidly and then stays lit constantly for 2 seconds, the system features an alternating-code system. Flashing and con‐ tinuous illumination of the LED will repeat for approximately 20 seconds.


For systems with an alternating-code system, the integrated universal remote control and the system also have to be synchronized. Please read the operating manual of the system being set up for information on how to syn‐ chronize the system. Synchronizing is easier with the aid of a second person. To synchronize: 1. Park the vehicle within range of the remote-


controlled system.


2. Program the relevant button on the interior


rearview mirror as described.


3. Locate and press the synchronizing button on the system being programmed. You have approx. 30 seconds for the next step.


4. Hold down the programmed button on the interior rearview mirror for approximately 3 seconds and then release it. If necessary, repeat this work step up to three times in or‐ der to finish synchronization. Once synchro‐ nization is complete, the programmed func‐ tion will be carried out.


Reprogramming individual buttons 1. Switch on the ignition. 2. Press and hold the interior rearview mirror


button to be programmed.


3. As soon as the interior rearview mirror LED


starts flashing slowly, hold the hand-held transmitter for the system to be controlled approx. 1 to 3 in/2.5 to 8 cm away from the buttons on the interior rearview mirror. The required distance depends on the manual transmitter.


4. Likewise, press and hold the button of the desired function on the hand-held transmit‐ ter.


5. Release both buttons as soon as the interior


rearview mirror LED flashes more rapidly. When the LED is flashing faster, this indi‐ cates that the button on the interior rearview mirror has been programmed. The system


146


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


can then be controlled by the button on the interior rearview mirror. If the LED does not flash faster after at least 60 seconds, change the distance and repeat the step. Several more attempts at different distances may be necessary. Wait at least 15 seconds between attempts. Canada: if programming with the hand-held transmitter was interrupted, hold down the interior rearview mirror button and repeat‐ edly press and release the hand-held trans‐ mitter button for 2 seconds.


Controls


Before operation Before operating a system using the


integrated universal remote control, ensure that there are no people, animals, or objects within the range of movement of the remote-controlled system; otherwise, there is a risk of injury or damage. Also follow the safety instructions of the hand- held transmitter.◀ The system, such as the garage door, can be operated using the button on the interior rear‐ view mirror while the engine is running or when the ignition is started. To do this, hold down the button within receiving range of the system until the function is activated. The interior rearview mirror LED stays lit while the wireless signal is being transmitted. Deleting stored functions Press and hold the left and right button on the interior rearview mirror simultaneously for ap‐ proximately 20 seconds until the LED flashes rapidly. All stored functions are deleted. The functions cannot be deleted individually.


Interior equipment


Controls


Digital compass At a glance


1 Control button 2 Mirror display


Mirror display The point of the compass is displayed in the mirror when driving straight. Operating concept Various functions can be called up by pressing the control button with a pointed object, such as the tip of a ballpoint pen or similar object. The following setting options are displayed in suc‐ cession, depending on how long the control but‐ ton is pressed: ▷ Pressed briefly: turns display on/off. ▷ 3 to 6 seconds: compass zone setting. ▷ 6 to 9 seconds: compass calibration. ▷ 9 to 12 seconds: left/right-hand steering


setting.


▷ 12 to 15 seconds: language setting. Setting the compass zones Sets the particular compass zones on the vehi‐ cle so that the compass operates correctly; refer to World map with compass zones.


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


147


Controls


Interior equipment


World map with magnetic zones


Procedure 1. Press and hold the control button for approx. 3 to 4 seconds. The number of the set com‐ pass zone appears in the mirror.


2. To change the zone setting, press the con‐ trol button quickly and repeatedly until the number of the compass zone corresponding to your location appears in the mirror.


The set zone is stored automatically. The com‐ pass is ready for use again after approximately 10 seconds. Calibrating the digital compass The digital compass must be calibrated in the event of the following: ▷ The wrong point of the compass is dis‐


played.


▷ The point of the compass displayed does not change despite changing the direction of travel.


▷ Not all points of the compass are displayed.


Procedure 1. Make sure that there are no large metallic


objects or overhead power lines near the ve‐ hicle and that there is sufficient room to drive around in a circle.


2. Set the currently applicable compass zone. 3. Press and hold the control button for approx. 6 to 7 seconds so that "C" appears on the display. Next, drive in a complete circle at least once at a speed of no more than 4 mph/7 km/h. If calibration is successful, the "C" is replaced by the points of the com‐ pass.


Left/right-hand steering The digital compass is already set for right or left-hand steering at the factory. Setting the language Press and hold the control button for approx. 12
to 13 seconds. Briefly press the control button again to switch between English "E" and Ger‐ man "O".


148


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


The setting is stored automatically after approx‐ imately 10 seconds.


Ashtray/cigarette lighter Ashtray Opening


Raise cover.


Emptying Take out the insert. Lighter


Danger of burns Only hold the hot lighter by its knob; oth‐ erwise, there is the danger of getting burned. Switch off the ignition and take the remote con‐ trol with you when leaving the vehicle so that children cannot use the lighter and burn them‐ selves.◀


Interior equipment


Controls


Push in the lighter. The lighter can be removed as soon as it pops back out.


Connecting electrical devices Note


Do not plug the charger into the socket Do not connect battery chargers to the


factory-installed sockets in the vehicle. Doing so may result in damage to the vehicle.◀


Sockets The lighter socket can be used as a socket for electrical equipment while the engine is running or when the ignition is switched on. The total load of all sockets must not exceed 140 watts at 12 volts. Do not damage the socket by using unsuitable connectors. Front center console


Raise the cap and remove the cover or cigarette lighter.


The lighter is located next to the ashtray.


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


149


Controls


Interior equipment


In the front passenger footwell


Socket is located below the glove compartment.


Rear center console


Remove cover.


In the cargo area


The socket is located on the left side in the cargo area.


USB interface for data transfer At a glance The USB interface for data transmission is lo‐ cated in the glove compartment. Depending on the variant, the USB interface may also be lo‐ cated in the center armrest.


The USB interface is located in the glove com‐ partment


The USB interface is located in the center arm‐ rest.


General information Connection for importing and exporting data on USB devices, e.g.: ▷ Personal Profile settings, refer to page 33. ▷ Music collection, see user's manual for Nav‐ igation, Entertainment and Communication. ▷ Importing trips, see user's manual for Navi‐ gation, Entertainment and Communication.


Notes Observe the following when connecting:


150


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


▷ Do not use force when plugging the con‐


nector into the USB interface.


▷ Do not connect devices such as fans or


lamps to the USB interface.


▷ Do not connect USB hard drives. ▷ Do not use the USB interface to recharge


external devices.


Through-loading system The concept The cargo area can be enlarged by folding down the rear seat backrest. The rear seat backrest is divided at a ratio of 40– 20–40. The sides can be folded down separately or to‐ gether. Notes


Danger of pinching Before folding down the rear seat backr‐ ests, ensure that the area of movement of the backrests is clear. In particular, ensure that no one is located in or reaches into the area of movement of the rear seat backrests when the middle section is folded down. Otherwise, injury or damage may result.◀


Locking the backrest Before driving with passengers in the rear of the vehicle, make sure that the backrests are engaged and thus locked in place. Otherwise, the restraining effect of the safety belts may be limited in an accident.◀


Retract the head restraint if necessary be‐ fore backrest is folded down


With folding head restraints, fold in the head re‐ straints before folding down the backrests, or damage may result.◀


Interior equipment


Controls


Opening 1. Unlock the belt lock of the center safety belt


in the rear using the latch plate of another safety belt. Insert the latch plate at the end of the belt into the specially designated fixture on the rear window shelf.


2.


3. Push the corresponding head restraint


down as far as it will go.


4. Pull the corresponding lever in the cargo


area to release the rear seat backrest.


5. The unlocked rear seat backrest moves for‐


ward slightly.


6. Fold backrest forward.


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


151


Controls


Interior equipment


Closing 1. Return the rear seat backrest to the upright


seating position and engage it.


Ensure that the lock is securely en‐ gaged


Make sure that the lock engages properly when folding back, otherwise transported cargo could enter the passenger compart‐ ment during braking or evasive maneuvers and endanger the vehicle occupants.◀


2. Release the belt tongue from the fixture on


the rear window shelf. Insert the belt tongue in the belt lock of the center safety belt. Make sure you hear the latch plate engage.


3.


To secure cargo, refer to page 164, with nets or draw straps, the cargo area is fitted with lashing eyes. Folding down the middle section 1. Fold in the middle head restraint. 2. Reach into the recess and pull the middle


section forward.


152


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


Storage compartments Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.


Storage compartments


Controls


▷ Compartments in the doors, refer to


page 154.


▷ Nets on the backrests of the front seats. ▷ Storage compartment in the rear center


console, refer to page 155.


Glove compartment Driver's side Opening


Notes


No loose objects in the passenger com‐ partment


Do not stow any objects in the passenger com‐ partment without securing them; otherwise, they may present a danger to occupants for in‐ stance during braking and avoidance maneu‐ vers.◀


Do not place anti-slip mats on the dash‐ board


Do not place anti-slip mats on the dashboard. The mat materials could damage the dash‐ board.◀


Storage compartments The following storage compartments are avail‐ able in the vehicle interior: ▷ Glove compartment on the driver's side, re‐


fer to page 153.


▷ Glove compartment on the front passenger


side, refer to page 154.


▷ Without Smoker's package: Front storage compartment, in front of the cupholders, re‐ fer to page 154.


▷ Storage compartment in the front center


armrest, refer to page 154.


Pull the handle.


Close the glove compartment again im‐ mediately


Close the glove compartment immediately after use while driving; otherwise, injury may occur during accidents.◀


Closing Fold up the cover.


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


153


Controls


Storage compartments


Front passenger side Opening


Front storage compartment


Raise the lid to open it.


Compartments in the doors


Do not stow any breakable objects Do not store any breakable objects, e. g. glass bottles, in the compartments, or there is an increased risk of injury in the event of an ac‐ cident.◀


Center armrest Front A storage compartment is located in the center armrest between the front seats. Opening


Pull the handle. The light in the glove compartment switches on. The net in the glove compartment is provided for stowing the storage tray for the cupholder, refer to page 155.


Close the glove compartment again im‐ mediately


Close the glove compartment immediately after use while driving; otherwise, injury may occur during accidents.◀


Closing Fold up the cover. Locking The glove compartment can be locked with an integrated key to separately secure the trunk lid, refer to page 38, for example. After the glove compartment is locked, the re‐ mote control can be handed over, such as at a hotel, without the integrated key, refer to page 30. This prevents access to the glove compartment and to the cargo area.


Fold the center armrest up.


Repositioning Center armrest can be pushed forwards or back‐ wards. It engages in the end positions.


154


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


Storage compartments


Controls


Connection for an external audio device


For a description, see the user's manual for Navigation, Entertain‐ ment and Communication.


Storage compartment in the rear Storage compartment is located in the rear cen‐ ter console.


Storage tray for front cupholders The cupholder with the storage tray can be used for additional storage. To do this, place the stor‐ age tray in the cupholder. Only use the storage tray for small objects, such as keys or the remote control. When not in use, stow the storage tray in the glove compartment net. Insert the storage tray into the net so that the top surface faces up. Note the trapezoidal shape of the net and tray. Rear In the center armrest.


Cupholders Notes


Shatter-proof containers and no hot drinks


Use light and shatter-proof containers and do not transport hot drinks. Otherwise, there is the increased danger of injury in an accident.◀


Unsuitable containers Do not forcefully push unsuitable contain‐ ers into the cupholders. This may result in dam‐ age.◀


Front


Pull the center armrest forward at the strap. To open: press the button. To close: push both covers back in, one after the other.


Pushing back the covers Push back the covers before folding up the center armrest; otherwise, the cupholder could become damaged.◀


Clothes hooks The clothes hooks are located in the grab han‐ dles in the rear.


Do not obstruct view When suspending clothing from the


hooks, ensure that it will not obstruct the driver's vision.◀


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


155


Controls


Storage compartments


No heavy objects Do not hang heavy objects from the hooks;


otherwise, they may present a danger to pas‐ sengers during braking and evasive maneu‐ vers.◀


Storage compartments in the cargo area Storage compartment A storage compartment is located on the left side. Net Small objects can be stowed in the net on the left side. Storage compartment Located on the right side is a storage compart‐ ment for the onboard vehicle tool kit, refer to page 196, and first aid kit, refer to page 208. Hooks/multi-function hook


Only transport heavy luggage in the trunk if it has been appropriately secured.◀


Retaining strap A retaining strap is available on the right side trim for fastening small objects. Lashing eyes in the cargo area To secure the cargo, refer to page 164, there are four lashing eyes in the cargo area. Floor net The floor net can also be used to Secure the load, refer to page 164, and to store small parts. Storage compartment under cargo floor panel


Maximum load To avoid damage to the vehicle, do not ex‐ ceed a maximum permitted load of 44 lbs/20 kg in the storage compartment under the cargo floor panel.◀


A multi-function hook is located on each side of the cargo area. The multi-function hooks can be loaded up to a max. of 8.8 lbs/4 kg.


Light and suitable objects only Only hang light bags or suitable objects


from the holders. Otherwise, there is a danger of objects flying about during braking and evasive maneuvers.


Raise the cargo floor panel, arrow 1, and latch at top, if necessary, arrow 2.


Partitioning the compartment The compartment can be divided using an at‐ tachable partition.


156


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


Storage compartments


Controls


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


157


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


Driving tips


This chapter provides you with information useful in dealing with specific driving and operating modes.


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


Driving tips


Things to remember when driving


Things to remember when driving Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.


Drive conservatively for the first 200 miles/300 km. Brake system Brakes require an initial break-in period of ap‐ prox. 300 miles/500 km to achieve optimized contact and wear patterns between brake pads and discs. Drive moderately during this break-in period. Clutch The function of the clutch reaches its optimal level only after a distance driven of approx. 300 miles/500 km. During this break-in period, engage the clutch gently. Following part replacement The same breaking in procedures should be ob‐ served if any of the components mentioned above have to be renewed in the course of the vehicle's operating life.


General driving notes Closing the trunk lid


Drive with the trunk lid closed Only drive with the tailgate closed; other‐ wise, in the event of an accident or braking or evasive maneuvers, passengers or other road users may be injured or the vehicle may be dam‐ aged. In addition, exhaust fumes may enter the passenger compartment.◀ If driving with the tailgate open cannot be avoided: ▷ Close all windows and the glass sunroof. ▷ Greatly increase the blower speed. ▷ Drive moderately.


Breaking-in period General information Moving parts need to be broken in to adjust to each other. The following instructions will help achieve a long vehicle life and good economy. Engine and differential Always obey the official speed limit. Up to 1,200 miles/2,000 km Do not exceed the maximum engine and road speed: ▷ For gasoline engine, 4,500 rpm and


100 mph/160 km/h.


Avoid full-throttle operation and use of the transmission's kickdown mode for the initial miles. From 1,200 miles/2,000 km The engine and vehicle speed can gradually be increased. Tires Due to technical factors associated with their manufacture, tires do not achieve their full trac‐ tion potential until after an initial breaking-in pe‐ riod.


160


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


Things to remember when driving


Driving tips


Hot exhaust system Hot exhaust system High temperatures are generated in the


exhaust system. Do not remove the heat shields installed and never apply undercoating to them. When driv‐ ing, standing at idle and while parking, take care to avoid possible contact between the hot ex‐ haust system and any highly flammable materi‐ als such as hay, leaves, grass, etc. Such contact could lead to a fire, and with it the risk of serious personal injury as well as property damage. Do not touch hot exhaust pipes; otherwise, there is the danger of getting burned.◀


Mobile communication devices in the vehicle


Mobile communication devices in the ve‐ hicle


It is advised that you do not use mobile commu‐ nication devices, e.g., mobile phones, inside the vehicle without connecting them directly to the external antenna. Otherwise, the vehicle elec‐ tronics and mobile communication devices can interfere with each other. In addition, there is no assurance that the radiation generated during transmission will be discharged from the vehicle interior.◀


Hydroplaning On wet or slushy roads, a wedge of water can form between the tires and road surface. This phenomenon is referred to as hydroplan‐ ing. It is characterized by a partial or complete loss of contact between the tires and the road surface, ultimately undermining your ability to steer and brake the vehicle.


Hydroplaning When driving on wet or slushy roads, re‐


duce your speed to prevent hydroplaning.◀


Driving through water Drive though calm water only if it is not deeper than 9.8 inches/25 cm and at this height, no faster than walking speed, up to 6 mph/10 km/h. Adhere to water depth and speed limita‐ tions


Do not exceed this water depth and walking speed; otherwise, the vehicle's engine, the elec‐ trical systems and the transmission may be damaged.◀


Braking safely Your vehicle is equipped with ABS as a standard feature. Applying the brakes fully is the most effective way of braking in situations when this is neces‐ sary. The vehicle maintains steering responsiveness. You can still avoid any obstacles with a minimum of steering effort. Pulsation of the brake pedal and sounds from the hydraulic circuits indicate that ABS is in its active mode. Objects in the area around the pedals No objects in the area around the pedals Keep floor mats, carpets, and any other objects out of the area of motion of the pedals; otherwise, the function of the pedals could be impeded while driving Do not place additional floor mats over existing mats or other objects. Only use floor mats that have been approved for the vehicle and can be properly fixed in place. Ensure that the floor mats are securely fastened again after they were removed for cleaning, for example.◀


Driving in wet conditions When roads are wet or there is heavy rain, briefly exert gentle pressure on the brake pedal every few miles.


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


161


Driving tips


Things to remember when driving


Should corrosion form on the brake discs, the brakes will tend to respond with a pulsating ef‐ fect that generally cannot be corrected. Condensation under the parked vehicle When using the automatic climate control, con‐ densation water develops that exits underneath the vehicle. Therefore, traces of condensed water under the vehicle are normal.


Ensure that this action does not endanger other road users. The heat generated in this process helps dry the brake discs and pads. In this way braking efficiency will be available when you need it. Hills Drive long or steep downhill gradients in the gear in which the least braking is required. Otherwise, the brake system may overheat, resulting in a reduction in the brake system efficiency. Manual transmission: You can increase the engine's braking effect by shifting down, going all the way to first gear, if necessary. Automatic transmission: You can increase the engine's braking effect by shifting down in the manual mode of the auto‐ matic transmission.


Avoid load on the brakes Avoid placing excessive load on the brake system. Light but consistent brake pressure can lead to high temperatures, brake wear and pos‐ sibly even brake failure.◀


Do not drive in neutral Do not drive in neutral or with the engine stopped, as doing so disables engine braking. In addition, steering and brake assist is unavailable with the engine stopped.◀


Brake disc corrosion Corrosion on the brake discs and contamination on the brake pads are furthered by: ▷ Low mileage. ▷ Extended periods when the vehicle is not


used at all.


▷ Infrequent use of the brakes. Corrosion occurs when the minimum pressure that must be exerted by the pads during brake applications to clean the discs is not reached.


162


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


Loading Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.


General information Overloading the vehicle To avoid exceeding the approved carrying capacity of the tires, never overload the vehicle. Overloading can lead to overheating and in‐ creases the rate at which damage develops in‐ side the tires. This could result in a sudden loss of tire inflation pressure.◀ No fluids in the trunk Make sure that fluids do not leak into the trunk; otherwise, the vehicle may be damaged.◀


Determining the load limit


Loading


Driving tips


hicle and unstable driving situations may result.


2. Determine the combined weight of the


driver and passengers that will be riding in your vehicle.


3. Subtract the combined weight of the driver and passengers from XXX kilograms or YYY pounds.


4. The resulting figure equals the available


amount of cargo and luggage load capacity. For example, if the YYY amount equals 1,000 lbs and there will be four 150 lbs pas‐ sengers in your vehicle, the amount of avail‐ able cargo and luggage load capacity is 400 lbs: 1,000 lbs minus 600 lbs = 400 lbs. 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.


Load


The maximum load is the sum of the weight of the occupants and the cargo. The greater the weight of the occupants, the less cargo that can be transported.


1. Locate the following statement on your ve‐


hicle’s placard: ▷ The combined weight of occupants and


cargo should never exceed XXX kg or YYY lbs. Otherwise, damage to the ve‐


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


163


Driving tips


Loading


Stowing cargo


Floor net The floor net can also be used to Secure the load and to store small parts.


▷ Heavy cargo: stow as far forward and as low as possible, ideally directly behind the cargo area separating wall.


▷ Very heavy cargo: when the rear seat is not occupied, secure each of the outer safety belts in the opposite buckle.


▷ Cover sharp edges and corners. ▷ If necessary, fold down the rear backrests to


stow cargo.


▷ Do not stack cargo above the top edge of the


backrests.


▷ Place protective material around any sharp- edged or pointed objects that could bump against the rear window while the vehicle is in motion.


Securing cargo Lashing eyes in the cargo area


To secure the cargo there are four lashing eyes in the cargo area.


Hook the floor net into the fittings in the cargo area floor.


Securing cargo ▷ Smaller and lighter items: secure with re‐ taining straps, the floor net or draw straps. ▷ Larger and heavy objects: secure with cargo


straps.


Attach the cargo straps, retaining straps or draw straps to the lashing eyes in the cargo area.


Securing cargo Always position and secure the cargo as described above; otherwise, it can endanger the car's occupants if sudden braking or swerving becomes necessary. Heavy or hard objects should not be carried loose inside the car; otherwise, they could be thrown around as a result of hard braking, sud‐ den swerves, etc., and endanger the occu‐ pants.◀


Roof-mounted luggage rack Note Roof racks are available as special accessories. Securing Follow the installation instructions of the roof rack.


164


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


Roof drip rail with flaps


Loading


Driving tips


The anchorage points are located in the roof drip rail above the doors. Fold the cover outward.


Loading Because roof racks raise the vehicle's center of gravity when loaded, they have a major effect on vehicle handling and steering response. Therefore, note the following when loading and driving: ▷ Do not exceed the approved roof/axle loads


and the approved gross vehicle weight.


▷ Distribute the roof load uniformly. ▷ The roof load should not be too large in area. ▷ Always place the heaviest pieces on the bot‐


tom.


▷ Secure the roof luggage firmly, e.g., tie with


ratchet straps.


▷ Do not let objects project into the opening


path of the trunk lid.


▷ Drive smoothly. Avoid sudden acceleration and braking maneuvers. Take corners gen‐ tly.


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


165


Driving tips


Saving fuel


Saving fuel Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.


General information Your vehicle contains advanced technology for the reduction of fuel consumption and emis‐ sions. Fuel consumption depends on a number of dif‐ ferent factors. The implementation of certain measures, driv‐ ing style and regular maintenance can have an influence on fuel consumption and on the envi‐ ronmental impact.


Remove unnecessary cargo Additional weight increases fuel consumption.


Remove attached parts following use Remove auxiliary mirrors, roof or rear luggage racks which are no longer required following use. Attached parts on the vehicle impair the aero‐ dynamics and increase the fuel consumption.


Close the windows and glass sunroof Driving with the glass sunroof and windows open results in increased air resistance and raises fuel consumption.


Check the tire inflation pressure regularly Check and, if necessary, correct the tire inflation pressure at least twice a month and before start‐ ing on a long trip. Low tire inflation pressure increases rolling re‐ sistance and thus raises fuel consumption and tire wear.


Drive away without delay Do not wait for the engine to warm up while the vehicle remains stationary. Start driving right away, but at moderate engine speeds. This is the fastest way for the cold engine to reach its operating temperature.


Look well ahead when driving Avoid unnecessary acceleration and braking. By maintaining a suitable distance to the vehicle driving ahead of you. Driving smoothly and looking ahead reduces fuel consumption.


Avoid high engine speeds Use 1st gear to get the vehicle in motion. Be‐ ginning with 2nd gear, accelerate rapidly. When accelerating, shift up before reaching high en‐ gine speeds.


166


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


Saving fuel


Driving tips


Switch off any functions that are not currently needed Functions such as seat heating and the rear win‐ dow defroster require a lot of energy and con‐ sume additional fuel, especially in city and stop- and-go traffic. Therefore, switch off these functions if they are not actually needed.


Have maintenance carried out Have vehicles maintained regularly to achieve optimal vehicle economy and operating life. Have the maintenance carried out by your serv‐ ice center. Please also note the BMW Maintenance Sys‐ tem, refer to page 193.


ECO PRO The concept ECO PRO supports a driving style that saves on fuel consumption. For this purpose, the engine control and comfort functions, e. g. the climate control output, are adjusted. In addition, context-sensitive instructions can be displayed that assist in driving in a manner that optimizes fuel consumption. The extension of the range that is achieved as a result can be displayed in the instrument cluster. Activating ECO PRO


Press button repeatedly until ECO PRO is displayed in the instrument cluster.


When you reach the desired speed, shift into the highest applicable gear and drive with the en‐ gine speed as low as possible and at a constant speed. As a rule: driving at low engine speeds lowers fuel consumption and reduces wear. The gear shift indicator of your vehicle indicates the most fuel efficient gear.


Use coasting conditions When approaching a red light, take your foot off the accelerator and let the vehicle coast to a halt. On a downhill gradient, take your foot off the ac‐ celerator and let the vehicle roll. The flow of fuel is interrupted while coasting.


Switch off the engine during longer stops Switch off the engine during longer stops, e.g., at traffic lights, railroad crossings or in traffic congestion. Auto Start/Stop function The Auto Start/Stop function of your vehicle au‐ tomatically switches off the engine during a stop. If the engine is switched off and then restarted rather than leaving the engine running con‐ stantly, fuel consumption and emissions are re‐ duced. Savings can begin within a few seconds of switching off the engine. Using this system can cause certain compo‐ nents of the vehicle to become worn prema‐ turely. Iin addition, fuel consumption is also determined by other factors, such as driving style, road con‐ ditions, maintenance or environmental factors.


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


167


Driving tips


Saving fuel


Display in the instrument cluster ECO PRO bonus range


An extension of the range can be achieved by an adjusted driving style. This may be displayed as the bo‐ nus range in the instrument clus‐


ter.


Driving style


In the tachometer, a mark in the bar display indicates the current efficiency of the driving style cor‐ responding to the accelerator pedal position.


▷ Blue display: efficient driving style as long as


the mark moves within the blue range.


▷ Gray display: adjust driving style, e. g. by


backing off the accelerator pedal.


The display switches to blue as soon as all con‐ ditions for fuel-economy-optimized driving are met.


ECO PRO Tip - driving instruction


The arrow indicates that the driv‐ ing style can be adjusted to be more fuel efficient by backing off the accelerator.


Additional symbols


Symbol Measure


For efficient driving style, back off the accelerator or delay accelerating to allow time to assess road conditions. Reduce speed to the selected ECO PRO speed.


Symbol Measure


Automatic transmission: switch from S/M to D or avoid manual shift inter‐ ventions. Manual shift transmission: follow shifting instructions.


Manual shift transmission: engage neutral for engine stop.


Display in the instrument display When ECO PRO mode is activated, the display switches to a special configuration. Some of the displays may differ from the display in the instrument cluster. Configuring ECO PRO Via the Driving Experience Switch 1. Activate ECO PRO. 2. "Configure ECO PRO" 3. Configure the program.


Via the iDrive 1. "Settings" 2. "ECO PRO mode" Or 1. "Settings" 2. "Driving mode" 3. "Configure ECO PRO" Configure the program.


168


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


Saving fuel


Driving tips


Resetting fuel consumption history 1. Open "Options". 2. "Reset consumption history" Displaying EfficientDynamics info The current efficiency can be displayed.


"EfficientDynamics Info"


The following systems are displayed: ▷ Automatic engine Start/Stop function. ▷ Energy recovery. ▷ Climate control output. Display ECO PRO tips


"ECO PRO Tips"


The setting is stored for the profile currently in use.


ECO PRO Tip ▷ "ECO PRO limit:":


Set ECO Pro speed at which an ECO PRO Tip is to be displayed.


▷ "ECO PRO speed warning":


A reminder is displayed if the set ECO PRO speed is exceeded.


ECO PRO climate control "ECO PRO climate control" The climate control is adjusted to be fuel-effi‐ cient. By making a slight change to the set tempera‐ ture, or adjusting the rate of heating or cooling of the passenger compartment fuel consump‐ tion can be economized. The output of the seat heater is also reduced. ECO PRO Potential The percentage of potential savings that can be achieved with the current configuration is dis‐ played. Indications on the Control Display EfficientDynamics Information on fuel consumption and technol‐ ogy can be displayed during driving. 1. "Vehicle Info" 2. "EfficientDynamics" Displaying fuel consumption history The average fuel consumption can be displayed within an adjustable time frame.


"Consumption history"


Adjusting fuel consumption history time frame


Select the symbol.


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


169


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


Mobility


To ensure that you remain mobile at all times, this chapter supplies you with important information on the topics of fuels and lubricants, wheels and tires, service, maintenance, and Roadside Assistance.


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


Mobility


Refueling


Refueling Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.


General information


Refuel promptly Refuel no later than at a range of


30 miles/50 km, or operation of the engine is not ensured and damage may occur.◀


Fuel cap Opening 1. Briefly press the rear edge of the fuel filler


flap.


2. Turn the fuel cap counterclockwise.


3. Place the fuel cap in the bracket attached to


the fuel filler flap.


Closing 1. Fit the cap and turn it clockwise until you


clearly hear a click.


2. Close the fuel filler flap.


Do not pinch the retaining strap Do not pinch the retaining strap attached to the cap; otherwise, the cap cannot be closed properly and fuel vapors can escape. A message is displayed if the cap is loose or missing.◀


Manually unlocking fuel filler flap In the event of an electrical malfunction, for ex‐ ample.


172


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


1. Open the cover on the right side trim. To do


this, turn the cap.


Refueling Mobility


2. Pull the green knob with the fuel pump sym‐


bol. This releases the fuel filler flap.


Observe the following when refueling The fuel tank is full when the filler nozzle clicks off the first time.


Do not overfill the fuel tank Do not overfill the fuel tank; otherwise fuel may escape, causing harm to the environment and damaging the vehicle.◀


Handling fuels Obey safety regulations posted at the gas


station.◀


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


173


Mobility


Fuel


Fuel Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.


Fuel quality Gasoline For the best fuel economy, the gasoline should be sulfur-free or very low in sulfur content. Fuels that are marked on the gas pump as con‐ taining metal must not be used.


Refuel only with unleaded gasoline with‐ out metallic additives.


Do not refuel with any leaded gasoline or gaso‐ line with metallic additives, e. g. manganese or iron, or permanent damage to the catalytic con‐ verter and other components.◀ Fuels with a maximum ethanol content of 10 %, i. e., E10, may be used for refueling. Ethanol should satisfy the following quality standards: US: ASTM 4806–xx CAN: CGSB-3.511–xx xx: comply with the current standard in each case.


Do not refuel with ethanol E85
Do not refuel with E85, i.e., fuel with an


ethanol content of 85 %, or with Flex Fuel, as this would damage the engine and fuel supply sys‐ tem.◀ The engine is knock controlled. Therefore, you can refuel with different gasoline qualities.


Recommended fuel quality BMW recommends AKI 91. Minimum fuel grade BMW recommends AKI 89. Minimum fuel grade Do not use any gasoline below the mini‐ mum fuel grade as this may impair engine per‐ formance.◀ If you use gasoline with this minimum AKI Rat‐ ing, the engine may produce knocking sounds when starting at high outside temperatures. This has no effect on the engine life.


Minimum fuel grade The use of poor-quality fuels may result in harmful engine deposits or damage. Addition‐ ally, problems relating to drivability, starting and stalling, especially under certain environmental conditions such as high ambient temperature and high altitude, may occur. If drivability problems are encountered, we rec‐ ommend switching to a high quality gasoline brand and a higher octane grade — AKI number — for a few tank fills. To avoid harmful engine deposits, it is highly recommended to purchase gasoline from BP or Top Tier retailers. Failure to comply with these recommendations may result in the need for unscheduled mainte‐ nance.◀


174


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


Wheels and tires Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.


Tire inflation pressure Safety information The tire characteristics and tire inflation pres‐ sure influence the following: ▷ The service life of the tires. ▷ Road safety. ▷ Driving comfort. Checking the pressure Only check the tire inflation pressure when the tires are cold. This means after driving no more than 1.25 miles/2 km or when the vehicle has been parked for at least 2 hours. When the tires are warm, the tire inflation pressure is higher.


Check the tire inflation pressure regularly Regularly check the tire inflation pressure and correct it as needed: at least twice a month and before a long trip. If you fail to observe this precaution, you may be driving on tires with in‐ correct tire pressures, a condition that may not only compromise your vehicle's driving stability, but also lead to tire damage and the risk of an accident.◀ After correcting the tire inflation pressure: ▷ Reinitialize the Flat Tire Monitor. ▷ Reinitialize the Tire Pressure Monitor.


Wheels and tires Mobility


Pressure specifications The tire inflation pressure table, refer to page 176, contains all pressure specifications for the specified tire sizes at the ambient tem‐ perature. Pressure specifications apply to ap‐ proved tire sizes and recommended tire brands. This information can be obtained from your service center. To identify the correct tire inflation pressure, please note the following: ▷ Tire sizes of your vehicle. ▷ Maximum permitted driving speed. Tire inflation pressures up to 100 mph/ 160 km/h For speeds of up to 100 mph/160 km/h and for optimum driving comfort, note the pressure val‐ ues in the tire inflation pressure table, refer to page 176, and adjust as necessary.


These pressure values can also be found on the tire inflation pressure label on the driver's door pillar.


Maximum permissible speed Do not exceed 100 mph/160 km/h; other‐


wise, tire damage and accidents may result.◀


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


175


Mobility Wheels and tires


Tire inflation pressure values up to 100 mph/160 km/h 320i


Tire size


Specifications in bar/PSI with cold tires


225/50 R 17 94 V M +S A/S RSC 225/50 R 17 94 H M +S RSC 225/45 R 18 91 V M +S A/S RSC 225/45 R 18 91 Y RSC 225/45 R 18 95 V M +S XL RSC Front: 225/45 R 18
91 Y RSC Rear: 255/40 R 18 95 Y RSC Front: 225/40 R 19
89 Y RSC Rear: 255/35 R 19 92 Y RSC Front: 225/35 R 20
90 Y XL RSC Rear: 255/30 R 20
92 Y XL RSC Compact wheel T 135/80 R 17 103


Pressure specifications in bar/PSI


2.2 / 32


2.2 / 32


2.2 / 32


2.4 / 35


2.2 / 32


2.2 / 32


2.2 / 32


2.4/ 35


2.5 / 36


3.0 / 44


Speed up to a max. of 50 mph / 80 km/h 4.2 / 60


328i, 328i xDrive


Tire size


Specifications in bar/PSI with cold tires


225/50 R 17 94 V M +S A/S RSC 225/50 R 17 94 H M +S RSC 225/45 R 18 91 V M +S A/S RSC 225/45 R 18 91 Y RSC 225/45 R 18 95 V M +S XL RSC Front: 225/45 R 18
91 Y RSC Rear: 255/40 R 18 95 Y RSC Front: 225/40 R 19
89 Y RSC Rear: 255/35 R 19 92 Y RSC Front: 225/35 R 20
90 Y XL RSC Rear: 255/30 R 20
92 Y XL RSC Compact wheel T 135/80 R 17 103


Pressure specifications in bar/PSI


2.2 / 32


2.2 / 32


2.2 / 32


2.4 / 35


2.2 / 32


2.2 / 32


2.2 / 32


2.4 / 35


2.5 / 36


3.0 / 44


Speed up to a max. of 50 mph / 80 km/h 4.2 / 60


176


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


335i, 335i xDrive


Tire size


Specifications in bar/PSI with cold tires


225/45 R 18 91 V M +S A/S RSC 225/45 R 18 91 Y RSC 225/50 R 17 94 H M +S RSC 225/45 R 18 95 V M +S XL RSC Front: 225/45 R 18
91 Y RSC Rear: 255/40 R 18 95 Y RSC Front: 225/40 R 19
89 Y RSC Rear: 255/35 R 19 92 Y RSC Front: 225/35 R 20
90 Y XL RSC Rear: 255/30 R 20
92 Y XL RSC Compact wheel T 135/80 R 17 103


Pressure specifications in bar/PSI


Wheels and tires Mobility


exceeding 100 mph/160 km/h from the relevant table on the following pages. Otherwise tire damage and accidents could occur.◀


Tire inflation pressure values over 100 mph/160 km/h 320i


2.2 / 32


2.6 / 38


Tire size


Pressure specifications in bar/PSI


Specifications in bar/PSI with cold tires


225/50 R 17 94 V M +S A/S RSC 225/50 R 17 94 H M +S RSC 225/45 R 18 91 V M +S A/S RSC 225/45 R 18 91 Y RSC 225/45 R 18 95 V M +S XL RSC Front: 225/45 R 18
91 Y RSC Rear: 255/40 R 18 95 Y RSC Front: 225/40 R 19
89 Y RSC Rear: 255/35 R 19 92 Y RSC


2.2 / 32


2.7 / 39


2.4 / 35


2.9 /42


2.4 / 35


2.4 / 35


2.4 / 35


2.6 / 38


2.2 / 32


2.4 / 35


2.4 / 35


2.6 / 38


2.6 / 38


3.0 / 44


Speed up to a max. of 50 mph / 80 km/h 4.2 / 60


Tire inflation pressures at max. speeds above 100 mph/160 km/h


Speeds above 100 mph/160 km/h In order to drive at maximum speeds in ex‐ cess of 100 mph/160 km/h, please observe, and, if necessary, adjust tire pressures for speeds


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


177


Mobility Wheels and tires


Tire size


Front: 225/35 R 20
90 Y XL RSC Rear: 255/30 R 20
92 Y XL RSC Compact wheel T 135/80 R 17 103


Pressure specifications in bar/PSI 2.5 / 36


3.0 / 44


Speed up to a max. of 50 mph / 80 km/h 4.2 / 60


328i Without high-speed tuning feature Tire size


Pressure specifications in bar/PSI


Specifications in bar/PSI with cold tires


225/50 R 17 94 V M +S A/S RSC 225/50 R 17 94 H M +S RSC 225/45 R 18 91 V M +S A/S RSC 225/45 R 18 91 Y RSC 225/45 R 18 95 V M +S XL RSC Front: 225/45 R 18
91 Y RSC Rear: 255/40 R 18 95 Y RSC Front: 225/40 R 19
89 Y RSC Rear: 255/35 R 19 92 Y RSC


178


2.4 / 35


2.9 /42


2.6 / 38


3.1 / 45


2.6 / 38


2.6 / 38


2.6 / 38


2.8 / 41


Tire size


Front: 225/35 R 20
90 Y XL RSC Rear: 255/30 R 20
92 Y XL RSC Compact wheel T 135/80 R 17 103


Pressure specifications in bar/PSI 2.7 / 39


3.2 / 46


Speed up to a max. of 50 mph / 80 km/h 4.2 / 60


With high-speed tuning feature Tire size


Pressure specifications in bar/PSI


Specifications in bar/PSI with cold tires


225/50 R 17 94 H M+S RSC 225/45 R 18 91 Y RSC 225/45 R 18 95 V M+S XL RSC Front: 225/45 R 18
91 Y RSC Rear: 255/40 R 18 95 Y RSC Front: 225/40 R 19
89 Y RSC Rear: 255/35 R 19 92 Y RSC


2.4 / 35


2.9 /42


2.6 / 38


3.1 / 45


2.6 / 38


2.6 / 38


2.6 / 38


2.8 / 41


Online Edition for Part no. 01 40 2 903 880 - 07 12 490


Wheels and tires Mobility


Tire size


Front: 225/35 R 20
90 Y XL RSC Rear: 255/30 R 20
92 Y XL RSC Compact wheel T 135/80 R 17 103


Pressure specifications in bar/PSI 2.7 / 39


3.2 / 46


Speed up to a max. of 50 mph / 80 km/h 4.2 / 60


With high-speed tuning feature Tire size


Pressure specifications in bar/PSI


Specifications in bar/PSI with cold tires


225/50 R 17 94 H M +S RSC 225/45 R 18 91 Y RSC 225/45 R 18 95 V M +S XL RSC Front: 225/45 R 18
91 Y RSC Rear: 255/40 R 18 95 Y RSC Front: 225/40 R 19
89 Y RSC Rear: 255/35 R 19 92 Y RSC


2.4 / 35


2.9 /42


2.6 / 38


3.1 / 45


2.6 / 38


2.6 / 38


2.6 / 38


2.8 / 41


Tire size


Front: 225/35 R 20
90 Y XL RSC Rear: 255/30 R 20
92 Y XL RSC Compact wheel T 135/80 R 17 103


Pressure specifications in bar/PSI 2.7 / 39


3.2 / 46


Speed up to a max. of 50 mph / 80 km/h 4.2 / 60


328i xDrive Without high-speed tuning feature Tire size


Pressure specifications in bar/PSI


Specifications in bar/PSI with cold tires


225/50 R 17 94 V M +S A/S RSC 225/50 R 17 94 H M +S RSC 225/45 R 18 91 V M +S A/S RSC 225/45 R 18 91 Y RSC 225/45 R 18 95 V M +S XL RSC Front: 225/45 R 18
91 Y RSC Rear: 255/40 R 18 95 Y RSC Front: 225/40 R 19
89 Y RSC Rear: 255/35 R 19 92 Y RSC


2.4 / 35


2.9 /42


2.6 / 38


3.1 / 45


Loading...
x