Login- Download PDF Manual
-
with the vehicle stationary, first depress the brake; otherwise, the selector lever will refuse to move: shiftlock.
To prevent the vehicle from creeping after you select a driving position, depress the brake until you are ready to start.<
A lock prevents you from inadvertently engag- ing selector lever positions R and P. To cancel the lock, press the button on the front of the selector lever, see arrow.
P Park Select this only when the vehicle is stationary. The rear wheels are locked.
R Reverse Select this only when the vehicle is stationary.
N Neutral You can select this in a car wash, for example. The vehicle can roll.
D Drive, automatic position Position for normal vehicle operation. All for- ward gears are selected automatically. Under normal operating conditions, fuel con- sumption is lowest when you are driving in posi- tion D.
Kickdown Kickdown enables you to achieve maximum performance. Press the accelerator pedal beyond the full- throttle resistance point.
Sport program and manual operation M/S
Move selector lever from position D toward the left into the M/S shifting slot: The sport program is activated and DS is dis- played on the instrument cluster. This position is recommended for a performance-oriented driving style. To deactivate the sport program or manual mode M/S, move the selector lever to the right into position D.
57
g
Shifting gears via the selector lever Move selector lever from position D toward the left into the M/S shifting slot: When you press the selector lever forwards or backwards, the manual mode is activated and Steptronic changes gear. M1 through M6 are displayed on the instrument cluster. Upshifts and downshifts are executed only when they will result in a plausible combination of engine and vehicle speed; thus, for example, a downshift that would cause the engine to overrev will not be executed by the system. The gear selected is briefly displayed in the instru- ment cluster, followed by the gear actually in use.
Shifting gears via shift paddles* on the steering wheel The shift paddles allow you to shift gears quickly since both hands can remain on the steering wheel. > When you use the shift paddles on the
steering wheel to shift gears in automatic mode, the transmission switches to manual mode.
> If you do not accelerate or shift gears using
the shift paddles for a certain amount of time, the transmission switches back to automatic mode.
If the selector lever is in the M/S gear plane, manual mode remains active.<
of engine and vehicle speed; thus, for example, a downshift that would cause the engine to overrev will not be executed by the system. The gear selected is briefly displayed in the instru- ment cluster, followed by the gear actually in use.
Overriding selector lever lock Should the selector lever refuse to move out of position P even though the ignition is switched on, the brake is depressed and the button on the selector lever is pressed, the selector lever lock can be overridden: 1. Unclip the sleeve of the selector lever. 2. Pull the sleeve up over the selector lever
until the sleeve is inside out.
3. Using the screwdriver from the onboard
vehicle tool kit, refer to page 229, press the red lever while moving the selector lever to the desired position.
Turn signals/ headlamp flasher
> To shift up: pull one of the shift paddles. > To shift down: press one of the shift pad-
dles.
Upshifts and downshifts are executed only when they will result in a plausible combination
58
1 High beams 2 Headlamp flasher 3 Turn signals
Using turn signals Press the lever beyond the resistance point. To turn off manually, press the lever to the resistance point.
Unusually rapid flashing of the indicator lamp indicates that a turn signal indicator
has failed.<
Indicating a turn briefly Press the lever as far as the resistance point for as long as you wish to indicate a turn.
Triple turn signal activation Press the lever as far as the resistance point. The turn signals flash three times. You can activate or deactivate this function. 1. "Settings" 2. "Lighting" 3. "Triple turn signal"
Triple turn signal activation is activated and is stored for the remote control currently in use.
Wiper system
1 Switching on wipers 2 Switching off wipers or brief wipe 3 Activating/deactivating intermittent wipe or
rain sensor*
4 Cleaning windshield and headlamps* 5 Setting speed for intermittent wipe, or sen-
sitivity of the rain sensor
Switching on wipers Press the lever upward, arrow 1. The lever automatically returns to its initial posi- tion when released.
Normal wiper speed Press once. The system switches to operation in the inter- mittent mode when the vehicle is stationary.
Fast wiper speed Press twice or press beyond the resistance point. The system switches to normal speed when the vehicle is stationary.
Intermittent wipe or rain sensor* If the car is not equipped with a rain sensor, the intermittent-wipe time is a preset. If the car is equipped with a rain sensor, the time between wipes is controlled automatically and depends on the intensity of the rainfall. The rain sensor is mounted on the windshield, directly in front of the interior rearview mirror.
59
Activating intermittent wipe or rain sensor
Windshield washer nozzles The windshield washer nozzles are heated automatically* while the engine is running or the ignition is switched on.
Sports Wagon: rear window wiper
Press the button, arrow 3. The LED in the but- ton lights up.
Setting speed for intermittent wipe or sensitivity of the rain sensor Turn thumbwheel 5 up or down.
Deactivating intermittent wipe or rain sensor Press the button again, arrow 3. The LED goes out.
Deactivate the rain sensor before enter- ing an automatic car wash. Failure to do so could result in damage caused by undesired wiper activation.<
Cleaning windshield and headlamps* Pull the lever, arrow 4. Washer fluid is sprayed onto the windshield and the wipers are operated for a short time. When the vehicle lighting system is switched on, the headlamps are cleaned at regular and appropriate intervals.
Do not use the washers if there is any danger that the fluid will freeze on the
windshield. If you do, your vision could be obscured. Antifreeze should therefore be added to the fluid, refer to Washer fluid. Do not use the washers when the washer fluid reservoir is empty; otherwise, you will damage the washer pump.<
60
1 Intermittent operation. When reverse gear is engaged, the system switches to contin- uous operation.
2 Cleaning the rear window The rear window wiper does not move if the lever is in position 1 before the ignition is switched on. To switch on the rear window wiper: 1. Move the lever to its home position. 2. Reselect the desired position.
Do not use the washers when the washer fluid reservoir is empty; otherwise, you
will damage the washer pump.<
Washer fluid
Washer fluid antifreeze is flammable. Therefore, keep it away from ignition
sources and only store it in the closed original container that is kept out of reach of children; otherwise, there is a risk of personal injury. Comply with the instructions on the con- tainer.<
Washer fluid filler neck
Only refill washer fluid when the engine is cool to avoid contact with hot engine parts. Otherwise, fluid spills constitute a fire hazard and a risk to personal safety.<
One lever for all functions
All washer nozzles are supplied with washer fluid by the same reservoir. Fill with water and, if required, with a washer antifreeze, according to manufacturer's recom- mendations.
Mix the water and antifreeze before filling the washer fluid reservoir to make sure
the correct concentration is maintained.<
Capacity Approx. 6.3 US quarts/6 liters.
Cruise control*
The concept Cruise control is available for use at speeds of approx. 20 mph or 30 km/h. The car then stores and maintains the speed that you specify using the lever on the steering column. In order to maintain the specified speed, the system brakes the vehicle when the engine braking effect is insufficient on downhill gradients.
Do not use cruise control when driving at constant speed is prevented by adverse conditions, e.g. winding roads, dense traffic or poor road conditions due to, e.g., snow, rain, ice or loose surfaces. Otherwise, you could lose control of the vehicle and cause an accident as a result.<
Manual transmission You can shift gears while cruise control is acti- vated. The system is deactivated when you drive at very low engine speeds for an extended period.
1 Storing and maintaining speed or accelerat-
ing
2 Storing and maintaining speed or deceler-
ating
3 Deactivating cruise control 4 Resuming a speed stored beforehand
Maintaining current speed Tap the lever, arrow 1, or pull it briefly, arrow 2. The car's current speed is stored and main- tained. It is displayed on the speedometer and briefly in the instrument cluster. On uphill gradients, it may prove impossible to maintain the set speed if current engine power output is insufficient. If the engine braking effect is insufficient on downhill slopes, the sys- tem will brake the vehicle slightly.
Increasing desired speed Repeatedly press the lever to the resistance point or beyond, arrow 1, until the desired speed is reached. > Each time the lever is pressed to the resis- tance point, the desired speed is increased by approx. 1 mph or 1 km/h.
> Each time the lever is pressed beyond the
resistance point, the desired speed is increased by up to 5 mph or 10 km/h.
The system stores and maintains the speed.
Accelerating using the lever Accelerating slightly: Press the lever to the resistance point, arrow 1, until the desired speed is reached. Accelerating significantly:
61
g
Press the lever beyond the resistance point, arrow 1, until the desired speed is reached. The vehicle accelerates without pressure on the accelerator pedal. The system stores and maintains the speed.
Decreasing speed Repeatedly pull the lever to the resistance point or beyond, arrow 2, until the desired speed is displayed. > Each time the lever is pulled to the resis-
tance point, the desired speed is decreased by approx. 1 mph or 1 km/h.
> Each time the lever is pulled beyond the
resistance point, the desired speed is reduced by up to 5 mph or 10 km/h until the minimum speed of 20 mph or 30 km/h is achieved.
The system stores and maintains the speed.
Deactivating cruise control Tap the lever upwards or downwards, arrow 3. The displays on the speedometer disappear. In addition, the system is automatically deacti- vated: > When you brake the vehicle > When you switch gears very slowly or shift to neutral in cars with manual transmission
> When you select the automatic transmis-
sion's neutral position N
> When you activate DTC or deactivate DSC > When DSC or ABS is intervening Cruise control is not deactivated by depressing the accelerator pedal. Once the accelerator pedal is released, the stored speed is achieved again and maintained.
Warning lamp
The warning lamp lights up when cruise control is deactivated due to control intervention by the DSC, for example. A message appears on the Control Display.
62
Resuming a speed stored beforehand Press the button, arrow 4. The last stored speed is resumed and maintained. In the following instances, the stored speed is deleted and can no longer be resumed: > When driving stability control systems are
intervening
> In cars with manual transmission: when you
shift gears very slowly or shift to neutral
> In cars with automatic transmission: when
you engage selector lever position N
> When the ignition is switched off
Displays in the instrument cluster
1 Stored speed 2 Selected speed is displayed briefly
If --- mph or --- km/h temporarily appears in the instrument cluster display, it is pos- sible that the system prerequisites for operation are currently not met. Calling up Check Control messages, refer to page 78.<
Malfunction
The warning lamp comes on when the system has failed. A message appears on the Control Display. More
information can be found beginning on page 77.
Active cruise control*
The concept With active cruise control, you can select a desired speed which is not only automatically
maintained when driving on open roadways, but also varied to maintain a selected distance set- ting as slower traffic is encountered. Active cruise control is a technological advance over the familiar cruise control and is a welcome relief from the constant adjustment of speed that can accompany driving in traffic on high- ways or other high-speed thoroughfares. Espe- cially on longer trips, the system can reduce fatigue and tension, while increasing your enjoyment of driving. Please use it safely and responsibly. Within the limits of its capability, the system automatically adapts the car's speed to that of a slower vehicle in front of you. You can specify the distance to be maintained from the vehicle in front in four stages. For safety reasons, the distance is speed-dependent. Based on your selected distance setting, the system automat- ically decreases the throttle setting and lightly applies the brakes if necessary. The vehicle brake lamps will automatically illuminate to sig- nal a following driver to take action. In addition, it may be necessary for the vehicle or the driver to downshift, depending on the kind of trans- mission your vehicle is equipped with, to main- tain the distance setting selected. If the vehicle ahead speeds up or when the lane ahead becomes clear, your vehicle will accelerate to the speed you have selected by increasing the throttle setting and shifting gears automatically or by the driver as needed. Your selected speed will be held when driving downhill, too. Since this active cruise control system is a new technology and operates differently from con- ventional cruise control systems which you may be accustomed to, you are strongly urged to read all of the pages relating to this system before use. Pay special attention to the System limitations section beginning on page 66.
Braking sensation > If you step on the brake pedal while the sys-
tem is braking, pedal sensation will be slightly different from the usual.
> Possible noises during automatic braking
are normal.
Manual transmission You can shift gears while cruise control is acti- vated. The system is deactivated when you drive at very low engine speeds for an extended period.
Range of applications The minimum desired speed is 20 mph or 30 km/h, the maximum desired speed is 110 mph or 180 km/h.
As with conventional cruise control sys- tems, active cruise control in no way
diminishes or substitutes for the driver’s own personal responsibility, alertness and aware- ness in adjusting speed, braking or otherwise controlling the vehicle. The driver should decide when to use the system on the basis of road, traffic, visibility, and weather conditions. Active cruise control is intended for use on highway-type roadways where traffic is moving relatively smoothly. Do not use this system in city driving; heavy traffic such as during rush hour; on curvy, winding roads, slippery roads or roads with sharp curves such as highway off- ramps; during inclement weather such as snow, strong rain or fog; or when entering inter- changes, service/parking areas or toll booths. It is also important to regulate your vehicle's speed and distance setting within applicable legal limits. Always be ready to take action or apply the brakes if necessary, especially when the system is actively following a vehicle in front of you. Otherwise, driving situations could result that pose the risk of accidents.<
One lever for all functions
1 Store and increase desired speed 2 Store and decrease desired speed
63
Selecting distance
3 Deactivate system, refer to page 65
4 Resume stored desired speed and dis-tance, refer to page 65
5 Select distance to vehicle driving ahead,
refer to page 64
Storing current speed Briefly press the lever, arrow 1, or briefly pull it, arrow 2, at a driving speed of more than approx. 20 mph or 30 km/h.
> Press downward: Increase distance.
> Press upward:
Decrease distance.
The selected distance is displayed in the instru- ment cluster.
Distance 1
Distance 2
Distance 3
Distance 4
This is always the preset dis- tance when you use the system for the first time after starting the engine.Use good judgment to select the appro- priate following distance given road con- ditions, traffic, applicable laws and driving rec- ommendations for safe following distance. Otherwise, an accident risk could result.<
The car's current speed is stored. It is displayed on the speedometer and briefly in the instru- ment cluster.
Increasing desired speed Press or tap the lever to the resistance point or beyond, arrow 1, until the desired speed is dis- played. > Each time the lever is tapped to the resis-
tance point, the desired speed is increased by approx. 1 mph or 1 km/h.
> Each time the lever is tapped beyond the
resistance point, the desired speed is increased by up to 5 mph or 10 km/h until the maximum speed of 110 mph or 180 km/h is achieved.
The speed then displayed is stored and achieved on a clear road.
Decreasing desired speed Pull the lever, arrow 2, until the desired speed is displayed. The other functions work analogously to those described under Increasing desired speed.
64
Deactivating cruise control
Press the lever upward or downward, arrow 3. The displays on the speedometer disappear. In addition, the system is automatically deacti- vated: > When you brake the vehicle > When the speed is reduced to below
20 mph or 30 km/h due to a traffic situation > When you switch gears very slowly or shift to neutral in cars with manual transmission
> When you select the automatic transmis-
sion's neutral position N
> When you activate the Dynamic Traction
Control DTC
> When you deactivate the Dynamic Stability
Control DSC
> When DSC or ABS is intervening > When the system does not recognize any objects for a longer period of time, e.g. on infrequently traveled roads without a shoul- der or guard rails, or if the radar sensor is covered with dirt, refer to page 66
> When you apply the parking brakeWhen the system is deactivated, you must brake the vehicle yourself and/or maneuver as necessary; otherwise, there is a risk of accidents.<
Warning lamp
The warning lamp comes on when active cruise control has been auto- matically deactivated, for example
due to a driving speed below 20 mph or 30 km/h or a DSC intervention. A message appears on the Control Display.
Resuming stored desired speed and distance Briefly press the button, arrow 4. The stored speed and distance are regained and maintained. In the following instances, the stored speed is deleted and can no longer be resumed: > When driving stability control systems are
intervening
> In cars with manual transmission: when you
shift gears very slowly or shift to neutral
> In cars with automatic transmission: when
you engage selector lever position N
> When the ignition is switched off
Displays in the instrument cluster
1 Stored desired speed 2 Shows yellow: vehicle detected ahead
Flashes in red: system cannot maintain dis- tance; driver must brake the vehicle Flashes in yellow: driving stability control systems are intervening; cruise control is deactivated
3 Selected distance to vehicle ahead
The indicator lights up as soon as the sys- tem is activated.
4 Selected desired speed is temporarily dis-
played
If --- mph or --- km/h temporarily appears in the instrument cluster display, it is pos- sible that the system prerequisites for operation
65
g
are currently not met. Calling up Check Control messages, refer to page 78.<
Warning lamps
The indicator 2 flashes in red; a signal sounds. The system indicates that you must brake and/or maneuver the vehicle yourself. Active cruise con- trol cannot automatically restore the distance to the vehicle ahead. This indicator does not release you from your responsibility to adapt your desired speed and driving style to prevailing driving conditions.
The indicator 2 flashes in yellow. The prerequisites for operating active cruise control are not met, e.g. as a result of ABS or DSC interventions. Active cruise control is deactivated. You can reactivate the system, if desired, by tapping or pulling the lever when road and traffic conditions permit. It is not pos- sible to resume a stored speed.
Radar sensor
snow or ice. If necessary, clean the radar sensor located in the front bumper, see arrow. Be sure to use particular care when removing any layers of snow or ice from the sensor. The system cannot be activated if the sensor is incorrectly aligned.
For US owners only The transmitter and receiver units comply with part 15 of the FCC/Federal Communications Commission regulations. Operation is gov- erned by the following: FCC ID: NF3 ACC2SCU 003YK04001 0000
Compliance statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: > This device must not cause harmful inter-ference, and
> this device must accept any interference received, including interference that may cause undesired operation.
Any unauthorized modifications or changes to these devices could void the
user’s authority to operate this equipment.<
Malfunction
The warning lamp comes on when the system has failed. A message appears on the Control Display. More
information can be found beginning on page 77.
The sensor's ability to detect vehicles ahead may be restricted as a result of heavy rain, dirt,
System limitations
66
Always remember that the range and abil- ity of the system does have physical limi- tations. It will not apply the brakes or decelerate your vehicle when there is a slow-moving vehi- cle, stopped vehicle or stationary object ahead of you, as for example, at a traffic light or a parked vehicle. Also, the system does not react to oncoming traffic, pedestrians or other types of potential traffic such as a rider on horseback. It is also possible that the system may not detect smaller moving objects such as motor- cycles or bicycles. Be especially alert when encountering any of these situations as the sys- tem will neither automatically brake, nor provide a warning to you. Also, be aware that every decrease in the distance setting allows your vehicle to come closer to a vehicle in front of you and requires a heightened amount of alert- ness.<
Active cruise control is not and must not be used as a collision avoidance/warning
system.< If while your vehicle is actively following a vehi- cle in front of you and the vehicle ahead speeds up or the lane ahead becomes clear, then your vehicle will accelerate to the speed you have selected. Be aware that changing to a clear, unobstructed lane will also result in your vehicle accelerating.
Be certain to deactivate the system when you pull into an exit lane for a highway off-
ramp.< Also, vehicles traveling in a staggered manner on a highway may cause a delay in the system's reaction to a vehicle in front of you or may cause the system to react to a vehicle actually in the lane next to you. Always be ready to take action or apply the brakes if necessary.
While active cruise control is capable of braking your vehicle automatically when
you approach a slower vehicle ahead, it is important to be aware that the ability of the sys- tem to apply the brakes is also limited, e.g. when you reduce your desired speed sharply. The system cannot stop your vehicle. It uses only a portion of braking system capacity and does not utilize the full capacity of the vehicle
braking system. Therefore, the system cannot decrease your speed for large differences in speed between your vehicle and the vehicle ahead. Examples: when you approach a vehicle traveling at a much lower speed than your own speed such as approaching a toll booth or when a much slower vehicle cuts in front of you at close range.< Active cruise control can only decelerate the vehicle to approx. 20 mph or 30 km/h.
Swerving vehicles
When a vehicle moves from an adjacent lane into your lane, active cruise control will not rec- ognize this vehicle until it is fully in your lane ahead of your vehicle.
When a vehicle ahead suddenly swerves into your lane, the system may not be able to maintain the selected distance automatically. This also applies to great differences in speed between you and vehicles ahead, e.g. when quickly approaching a truck. There is a risk of collision. Once the system has established that a vehicle is indeed in front of you, it will indicate that you must brake and/or maneuver the vehi- cle yourself. Take action yourself; otherwise, there is a risk of an accident.<
67
Behavior in curves
Because of the limited range of the system, it is possible that in curves or on the peaks and val- leys of hilly roads, a vehicle ahead may be rec- ognized late, or not at all. Therefore, it is up to the driver to select a speed that is prudent in view of the curves and terrain of the roadway.
In approaching a curve, it is possible that active cruise control would react briefly to a vehicle in the adjacent lane. In addition, the system can sense if your vehicle is in a curve and may not accelerate. If your vehicle decelerates in either case, you can choose to overcome the deceler- ation by briefly pressing the accelerator pedal.
Your responsibility Your actions have priority at all times. When you press the accelerator pedal while driving with active cruise control, the automatic braking function will be temporarily interrupted. Once you release the accelerator pedal, the desired speed or the selected distance to the vehicle ahead is achieved again.
Do not leave your foot on the accelerator pedal and make sure that no objects such as floor mats are lying on the accelerator pedal. Otherwise, the system may not be able to brake the vehicle.<
68
Controls overview
Odometer, outside temperature display, clock
roads, for example; otherwise, there is an increased risk of an accident.<
Odometer and trip odometer Resetting the trip odometer: With the ignition switched on, press button 1 in the instrument cluster.
When the vehicle is parked If you still want to view the time, outside tem- perature and odometer reading briefly after the remote control has been taken out of the igni- tion lock: Press button 1 in the instrument cluster.
Tachometer
Never force the engine speed up into the red warning field, see arrow. In this range, the fuel supply is interrupted to protect the engine.
69
1 Knob in the instrument cluster 2 Outside temperature display and clock 3 Odometer and trip odometer
Knob in the instrument cluster > To reset the trip odometer while the ignition
is switched on
> To display the time, outside temperature and odometer briefly while the ignition is switched off
Units of measure To select the respective units of measure, miles or km for the odometer as well as 7 or 6 for the outside temperature, refer to page 73. The setting is stored for the remote control cur- rently in use.
Time, outside temperature display Setting the time, refer to page 75.
Outside temperature warning When the displayed temperature sinks to approx. +377/+36, a signal sounds and a warning lamp lights up. There is an increased risk of black ice.
Black ice can also form at temperatures above +377/+36. You should there-
fore drive carefully on bridges and shaded
w
Fuel gauge
Coolant temperature A warning lamp will come on if the coolant, and therefore the engine, becomes too hot. In addi- tion, a message will appear on the Control Dis- play. Check coolant level, refer to page 222.
Energy Control*
Fuel tank capacity: approx. 16.1 gallons/ 61 liters. You can find information on refueling on page 197. If the tilt of the vehicle varies for a longer period, when you are driving in mountainous areas, for example, the indicator may fluctuate slightly.
Reserve Once the fuel level has fallen to the reserve zone, a message briefly appears on the Control Display and the cruising range for the remaining amount of fuel is displayed on the computer. Under a cruising range of approx. 30 miles/ 50 km, the message remains in the Control Dis- play.
Refuel as soon as possible once your cruising range falls below 30 miles/
50 km; otherwise, engine functions are not ensured and damage can occur.<
Displays the current fuel consumption. This allows you to see whether your current driving style is conducive to fuel economy with mini- mum exhaust emissions.
Engine oil temperature*
When the engine is at normal operating temper- ature, the engine oil temperature is between approx. 2107/1006 and approx. 3007/ 1506. If the engine oil temperature is too high, a mes- sage appears on the Control Display.
70
Computer
Displays in the instrument cluster
Calling up information
Press the button in the turn indicator lever. The following items of information are dis- played in the order listed: > Cruising range > Average speed > Average fuel consumption > Current fuel consumption* > No information To set the corresponding units of measure, refer to Units of measure on page 73.
Cruising range Displays the estimated cruising range available with the remaining fuel. The range is calculated on the basis of the way the car has been driven over the last 18 miles/30 km and the amount of fuel currently in the tank.
Refuel as soon as possible once your cruising range falls below 30 miles/
50 km; otherwise, engine functions are not ensured and damage can occur.<
Average speed Periods with the vehicle parked and the engine switched off are not included in the calculations of average speed. With the trip computer, refer to page 72, you can have the average speed for another trip dis- played.
To reset average speed: press the button in the turn indicator lever for approx. 2 seconds.
Average fuel consumption The average fuel consumption is calculated for the time during which the engine is running. You can have the average consumption for another trip displayed, refer to Displays on the Control Display below. To reset average fuel consumption: press the button in the turn indicator lever for approx. 2 seconds.
Current fuel consumption* Displays the current fuel consumption. This allows you to see whether your current driving style is conducive to fuel economy with mini- mum exhaust emissions.
Displays on the Control Display The computer can also be opened via iDrive. 1. "Vehicle Info" 2. "Onboard info" or "Trip computer"
Displays on the "Onboard info":
> Cruising range > Distance from destination
71
> Estimated time of arrival if:
> A distance was manually entered in the
computer, refer to the information below.
> A destination was entered in the naviga-
tion system*, refer to page 125.
Displays on the "Trip computer":
> Departure time > Trip duration > Trip distance
Settings and information
Operating principle
Both displays show: > The average speed and > the average fuel consumption.
Resetting the fuel consumption and speed You can reset the values for average speed and average consumption: 1. Select the respective menu item and press
the controller.
2. Press the controller again to confirm your
selection.
Resetting the Trip computer You can reset all values: 1. "Vehicle Info" 2. "Trip computer" 3. "Reset"
1 Button for:
> Selecting display
72
> Setting values
2 Button for:
> Confirming selected display or set val-
ues
> Calling up computer information 71
3 When the lights are on: instrument lighting
brightness 95
4 Calling up Check Control 77
5 Checking engine oil level 219
6 Setting the time 75
7 Setting the date 76
8 Viewing service requirement display 73Exiting displays The outside temperature reading and the time reappear when you press button 2 or if you make no entries within approx. 15 seconds. If required, complete the current setting first.
Units of measure
Setting the units of measure You can change the units for fuel consumption, route/distance, temperature and pressure. 1. "Settings" 2. "Language/Units"
3. Select the desired menu item. 4. Select the desired unit. The settings are stored for the remote control currently in use.
Service requirements
The remaining driving distance and the date of the next scheduled service are displayed briefly immediately after you start the engine or switch on the ignition.
The extent of service work required can be read out from the remote control by
your BMW Service Advisor.< For certain maintenance operations, you can view the respective distance remaining or due date individually in the instrument cluster.
1. Switch on the ignition, refer to page 54. 2. Push button 1 in the turn indicator lever up
or down repeatedly until the appropriate symbol appears in the display, accompa- nied by the words "SERVICE-INFO".
3. Press button 2.
73
4. Use button 1 to scroll through the individual
service items.
Possible displays
1 Button for selecting functions 2 Service requirements 3 Engine oil 4 Roadworthiness test* 5 Front brake pads 6 Rear brake pads 7 Brake fluid The sequence of displayed service items may vary. The data for the next service appointment is shown first.
More information
Detailed information on service requirements You can call up additional information on the maintenance regimen on the Control Display.
74
1. "Vehicle Info" 2. "Vehicle status"
3. "Service required" Required maintenance procedures and legally mandated inspections are displayed. You can request more detailed information on every entry: Select the entry and press the controller. To exit from the menu: Move the controller to the left.
Symbols
No service is currently required.
The deadline for service or a legally man- dated inspection is approaching. Please
schedule a service appointment.
The service deadline has already passed.
Entering deadlines for legally required inspections* Make sure the date on the Control Display is set correctly, refer to page 76; otherwise, the effec- tiveness of CBS Condition Based Service is not ensured. 1. "Vehicle Info" 2. "Vehicle status" 3. "Service required"
10. Press the controller to apply the setting.
The date entry is stored.
To exit from the menu: Move the controller to the left. More information on the BMW Maintenance System can be found on page 223.
Automatic Service Request* Data regarding the maintenance status or legally mandated inspections of the vehicle are automatically transmitted to your BMW center prior to a service due date. You can check when your BMW center was notified. 1. "Vehicle Info" 2. "Vehicle status"
4. "§ Vehicle inspection"
5. Open the menu for entering the deadline. 6. "Date:" 7. Create the settings. 8. Press the controller to apply the setting.
The year is highlighted.
9. Turn the controller to make the adjustment.
3. "Options" 4. "Last Service Request"
Clock The settings are stored for the remote control currently in use, refer also to Personal Profile on page 26.
Setting the time
In the instrument cluster To set the 12h/24h mode, refer to Setting the time format below.
75
Setting the time 1. "Settings" 2. "Time/Date"
3. "Time:" 4. Turn the controller until the desired hours are displayed, and then press the controller. 5. Turn the controller until the desired minutes are displayed, and then press the controller.
The time is stored.
