2012 Acura TSX Owners Manual

You can adjust the time in the clock display, using the CLOCK button.

■ Adjusting the Time

Menu Button

1. Press the MENU button.

2. Rotate

to select CLOCK ADJUST in

the display.

3. Press

. CLOCK ADJUST appears.

4. Rotate

to select the item you want to adjust (12/24 hour mode, hour, minute). Then press

12/24 Hour Mode

5. Rotate

to make the adjustment.

6. Press

to enter your selection. The display returns to CLOCK ADJUST. Repeat steps 4 to 6 to adjust other items.

Hour Setting

7. To enter the selection, Rotate

and select

Minute Setting

SET, then press

8. Press the MENU button to go back to the

normal display.

TOC

Index

88

1Clock

You can switch the clock display between 24 hours and 12 hours when in the menu mode.

Selector Knob Icon details Rotate Press

to select.

to enter.

To set the time to the nearest hour: Press and hold the CLOCK button until the clock display begins to blink, then press the (3 (Reset) button.

Depending on the displayed time, the clock sets forward or backward.

Example: 1:06 will reset to 1:00
1:53 will reset to 2:00

Models with navigation system The clock is automatically updated through the navigation system, so the time does not need to be adjusted.

2013 TSX13 ACURA TSX 4D-31TL16400.book 89 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

Locking and Unlocking the Doors

QRG

Key Types and Functions This vehicle comes with the following keys:

■ Retractable Master Keys

Panic Button

Trunk Button

Lock Button

Unlock Button

Release Button

Release Button

Press

Use the keys to start and stop the engine, and to lock and unlock all the doors, trunk, and fuel fill door. You can also use the remote transmitter to lock and unlock the doors, trunk, and fuel fill door. Models with a driving position system The seat automatically moves to the preset position when you unlock the door using the remote transmitter on the master key.

2 Driving Position Memory System * P. 111

The master key folds up inside the remote transmitter. 1. Press the release button to release the key

out from the transmitter. u Make sure to fully extend the key.

2. To close the key, press the release button

then push the key inside the transmitter until you hear a click.

TOC

Index

1Key Types and Functions

All the keys have an immobilizer system. The immobilizer system helps to protect against vehicle theft.

2 Immobilizer System P. 98

The keys contain precision electronics. Adhere to the following advice to prevent damage to the electronics: • Do not leave the keys in direct sunlight, or in

locations with high temperature or high humidity. • Do not drop the keys or set heavy objects on them. • Keep the keys away from liquids. • Do not take the keys apart except for replacing the

battery.

If the circuits in the keys are damaged, the engine may not start, and the remote transmitter may not work. If the keys do not work properly, have them inspected by a dealer.

If the key is not fully extended, the immobilizer system may not work properly, and the engine may not start.

Avoid contact with the key whenever it extends or retracts.

* Not available on all models

Continued

89

2013 TSX13 ACURA TSX 4D-31TL16400.book 90 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuLocking and Unlocking the DoorsuKey Types and Functions

QRG

■ Valet Key

Can be used to start and stop the engine, and lock and unlock driver’s door.

1Valet Key

When you need to leave a key with a third party, leave the valet key.

■ Key Number Tag

Contains a number that you will need if you purchase a replacement key.

1Key Number Tag

Keep the key number tag separate from the key in a safe place outside of your vehicle. If you wish to purchase an additional key, contact a dealer.

If you lose your key and you cannot start the engine, contact a dealer.

TOC

Index

90

2013 TSX13 ACURA TSX 4D-31TL16400.book 91 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside

QRG

Locking/Unlocking the Doors from the Outside ■ Using the Remote Transmitter

Unlock Button

LED

Lock Button

■ Locking the doors Press the lock button. Once:

uSome exterior lights flash, all the doors,

trunk, and fuel fill door lock, and the security system sets.

Twice (within five seconds after the first push):

uA beeper sounds and verifies the security

system is set.

■ Unlocking the doors Press the unlock button. Once:

uSome exterior lights flash twice, and the

driver’s door and fuel fill door unlocks.

Twice:

uThe remaining doors and the

trunk unlock.

TOC

Index

1Using the Remote Transmitter

Open the door within 30 seconds. If you do not open a door within 30 seconds of unlocking the vehicle with the remote transmitter, the doors will automatically relock.

If the interior light switch is in the door activated position, the interior lights come on when you press the unlock button. No doors opened: The lights fade out after 30 seconds. Doors relocked with the remote: The lights go off immediately.

2 Interior Lights P. 125

The remote transmitter uses low-power signals, so the operating range may vary depending on the surroundings.

The remote transmitter will not work when the key is in the ignition switch. The remote will not lock the vehicle when a door is open.

If the distance at which it works varies, the battery is probably low. If the LED does not come on when you press a button, the battery is dead.

2 Replacing the Battery P. 269

Continued

91

2013 TSX13 ACURA TSX 4D-31TL16400.book 92 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside

QRG

TOC

■ Locking/Unlocking the Doors Using a Key

Fully insert the key and turn it.

If you are using the master key, make sure it is fully extended.

1Locking/Unlocking the Doors Using a Key

When you lock the driver’s door with a key, all the other doors, trunk, and fuel fill door lock at the same time. When unlocking, the driver’s door and fuel fill door unlock first. Turn the key a second time within a few seconds to unlock the remaining doors and the trunk.

Lock

Unlock

■ Locking a Door Without Using a Key

■ Locking the driver’s door Pull the lock tab rearward a or push the master door lock switch in the lock direction b, and close the door.

■ Locking the passenger’s doors Pull the lock tab rearward and close the door.

1Locking a Door Without Using a Key

When you lock the driver’s door, all the other doors, trunk, and fuel fill door lock at the same time. Make sure you have the key in your hand before locking the door to prevent it from being locked in the vehicle.

Index

■ Lockout prevention system The doors cannot be locked when the key is in the ignition switch, and any door is open.

92

2013 TSX13 ACURA TSX 4D-31TL16400.book 93 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Inside

QRG

Locking/Unlocking the Doors from the Inside ■ Using the Lock Tab

To Lock

To Unlock

Lock Tab

■ Locking a door Pull the lock tab rearward.

■ Unlocking a door Push the lock tab forward.

1Using the Lock Tab

When you lock the door using the lock tab on the driver’s door, all the other doors, trunk, and fuel fill door lock at the same time. When you unlock the door using the lock tab on the driver’s door, only the driver’s door will unlock.

TOC

Index

■ Using the Master Door Lock Switch

To Lock

Press the master door lock switch in as shown to lock or unlock all doors.

1Using the Master Door Lock Switch

When you lock/unlock the driver’s door using the master lock switch, all the other doors, trunk, and fuel fill door lock/unlock at the same time.

To Unlock

Master Door Lock Switch

93

2013 TSX13 ACURA TSX 4D-31TL16400.book 94 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuLocking and Unlocking the DoorsuChildproof Door Locks

QRG

Childproof Door Locks The childproof door locks prevent the rear doors from being opened from the inside regardless of the position of the lock tab.

■ Setting the Childproof Door Locks

Slide the lever in the rear door to the lock position, and close the door.

■ When opening the door Open the door using the outside door handle.

Unlock

Lock

1Childproof Door Locks

To open the door from the inside when the childproof door lock is on, put the lock tab in the unlock position, lower the rear window, put your hand out of the window, and pull the outside door handle.

Auto Door Lock/Unlock ■ Auto door lock The auto door lock function automatically locks all the doors when the vehicle reaches about 10 mph (15 km/h).

1Auto Door Lock/Unlock

The auto door lock/unlock settings can be customized using the multi-information display.

2 Customized Features P. 80

■ Auto door unlock Automatic transmission models When you depress the brake pedal and move the shift lever to (P, the driver’s door automatically unlocks. Manual transmission models When you depress the brake pedal and turn the ignition switch to LOCK (0, the driver’s door automatically unlocks.

TOC

Index

94

2013 TSX13 ACURA TSX 4D-31TL16400.book 95 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

Opening and Closing the Trunk

QRG

Precautions for Opening/Closing the Trunk ■ Opening the trunk Open the trunk all the way.

u If it is not fully opened, the trunk lid may begin to close under its own weight.

■ Closing the trunk Keep the trunk lid closed while driving to:

uAvoid possible damage. uPrevent exhaust gas from leaking into the vehicle. 2 Carbon Monoxide Gas P. 60

Using the Trunk Opener

Trunk Release

Pressing the trunk release to the lower left of the driver's seat unlocks and opens the trunk.

TOC

Index

95

2013 TSX13 ACURA TSX 4D-31TL16400.book 96 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuOpening and Closing the TrunkuUsing the Remote Transmitter

QRG

Using the Remote Transmitter

Trunk Button

Press the trunk release button for approximately one second to unlock and open the trunk.

1Using the Remote Transmitter

When the driver’s door is locked: The trunk will lock when it is closed.

When the driver’s door is unlocked: The trunk will not lock when it is closed.

When the ignition switch is in any position except LOCK (0, you cannot open the trunk using the trunk release button on the remote transmitter.

Using the Trunk Release Switch

Push up the release switch on the trunk lid after the doors are unlocked.

Release Switch

TOC

Index

96

2013 TSX13 ACURA TSX 4D-31TL16400.book 97 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

QRG

Trunk Main Switch

The trunk main switch disables the trunk opener on the driver’s side and the trunk release button on the trunk lid to protect luggage in the trunk. 1. Make sure the rear seat-backs are not

folded down.

2. Turn off the trunk main switch in the

glove box.

3. Lock the glove box.

Main Switch

ON

OFF

uuOpening and Closing the TrunkuTrunk Main Switch

1Trunk Main Switch

If you need to give the key to someone else, give them the valet key.

The trunk release button on the remote transmitter is always enabled, even when the trunk main switch is off.

Emergency Trunk Opener

The trunk release lever allows you to open the trunk from inside for your safety.

Lever

Slide the release lever in the direction of the arrow.

1Emergency Trunk Opener

Parents should decide if their children should be shown how to use this feature.

97

TOC

Index

2013 TSX13 ACURA TSX 4D-31TL16400.book 98 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

Security System

QRG

Immobilizer System The immobilizer system prevents a key that has not been pre-registered from starting the engine. Each key contains electronic transmitters that use electronic signals to verify the key.

Pay attention to the following when inserting the key into the ignition switch. • Do not allow objects that emit strong radio waves near the ignition switch.

• Make sure the key is not covered by or touching a metal object.

• Do not bring a key from another vehicle’s immobilizer system near the n

ignition switch.

Security System Alarm The security system alarm activates when the doors, trunk, or hood are opened without the key, or remote transmitter. It also activates if you turn the ignition switch to ON (w after locking the doors with the remote transmitter.

■ When the security system alarm activates The horn sounds intermittently, and all the exterior lights flash.

■ To deactivate the security system alarm Unlock the vehicle using the key, or remote transmitter. The system, along with the horn and flashing lights, are deactivated.

TOC

Index

98

1Immobilizer System

NOTICE Leaving the ignition key in the vehicle can result in theft or accidental movement of the vehicle. Always take the ignition key with you whenever you leave the vehicle unattended.

Do not alter the system or add other devices to it. Doing so may damage the system and make your vehicle inoperable.

1Security System Alarm

The security alarm continues for a maximum of two minutes until the security system deactivates.

2013 TSX13 ACURA TSX 4D-31TL16400.book 99 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuSecurity SystemuSecurity System Alarm

QRG

TOC

■ Setting the security system alarm The security system alarm automatically sets when the following conditions have been met: • The ignition switch is in LOCK (0, and the key has been removed from the

ignition switch.

• The hood and trunk are closed.

• All doors are locked with the remote transmitter.

■ When the security system alarm sets The security system alarm indicator in the instrument panel blinks. When the blinking interval changes after about 15 seconds, the security system alarm is set.

■ To cancel the security system alarm The security system alarm is canceled when the vehicle is unlocked using the key or remote transmitter. The security system alarm indicator goes off at the same time.

1Security System Alarm

Do not set the security system alarm when someone is in the vehicle or a window is open. The system can accidentally activate when: • Unlocking the door with the lock tab or the master

door lock switch.

• Opening the trunk with the release button on the

driver’s door or the emergency trunk opener.

If the battery goes dead after you have set the security system alarm, the security alarm may go off once the battery is recharged or replaced. If this occurs, deactivate the security system alarm by unlocking a door using the key or remote transmitter.

Do not attempt to alter this system or add another device to it.

■ Panic Mode

PANIC Button

Index

■ The PANIC button on the remote

transmitter

If you press the PANIC button for approximately one second, the following will occur: • The horn sounds.

• Some exterior lights flash for about 30

seconds.

■ Canceling panic mode Press any button on the remote transmitter, or turn the ignition switch to ON (w.

99

2013 TSX13 ACURA TSX 4D-31TL16400.book 100 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

Opening and Closing the Windows

QRG

Opening/Closing the Power Windows The power windows can be opened and closed when the ignition switch is in ON (w, using the switches on the doors. The driver’s side switches can be used to open and close all the windows.

The power window lock button on the driver’s side must be switched off (not pushed in, indicator off) to open and close the windows from anywhere other than the driver’s seat.

When the power window lock button is turned on (pushed in, indicator on), you can only operate the driver’s window. Turn the power window lock button on when children are in the vehicle.

■ Opening/Closing Windows with Auto-Open/Close Function

On Off

Power Window Lock Button

Indicator

Driver’s Window Switch

Front Passenger’s Window Switch

■ Automatic operation To open: Push the switch down firmly.

To close: Pull the switch up firmly. The window opens or closes completely. To stop the window at any time, push or pull the switch briefly.

■ Manual operation To open: Push the switch down lightly.

To close: Pull the switch up lightly. Release the switch when the window reaches the desired position.

TOC

Index

100

1Opening/Closing the Power Windows

3WARNING

Closing a power window on someone’s hands or fingers can cause serious injury.

Make sure your passengers are away from the windows before closing them.

The power windows can be operated for up to 10 minutes after you turn the ignition switch off. Opening either front door cancels this function.

Auto Reverse If a power window senses resistance when closing automatically, it will stop closing and reverse direction.

The driver’s window auto reverse function is disabled when you continuously pull up the switch.

The auto reverse function stops sensing when the window is almost closed to ensure that it fully closes.

2013 TSX13 ACURA TSX 4D-31TL16400.book 101 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuOpening and Closing the WindowsuOpening/Closing the Power Windows

QRG

TOC

■ Opening/Closing Windows without

Auto-Open/Close Function

Close

Open

To open: Push the switch down.

To close: Pull the switch up.

Release the switch when the window reaches the desired position.

■ Opening Windows and Moonroof

with the Remote Transmitter

To open: Press the unlock button twice within 10 seconds and hold it down for the second time. If the windows stop midway, repeat the procedure.

Unlock Button

Index

Continued

101

2013 TSX13 ACURA TSX 4D-31TL16400.book 102 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuOpening and Closing the WindowsuOpening/Closing the Power Windows

■ Opening/Closing the Windows/Moonroof with the Key

Close

Open

To open: Unlock the driver’s door with the key. Within 10 seconds of returning the key to the central position, turn the key in the unlock direction and hold it there.

To close: Lock the driver’s door with the key. Within 10 seconds of returning the key to the central position, turn the key in the lock direction and hold it there.

Release the key to stop the windows/ moonroof at the desired position. If you want further adjustment, repeat the same operation.

QRG

TOC

Index

102

2013 TSX13 ACURA TSX 4D-31TL16400.book 103 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

Opening and Closing the Moonroof

■ Opening/Closing the Moonroof You can only operate the moonroof when the ignition switch is in ON (w. Use the switch in the front of the ceiling to open and close the moonroof.

■ Automatic operation To open: Pull the switch back firmly, then release.

To close: Push the switch forward firmly, then release.

The moonroof will automatically open or close all the way. To stop the moonroof midway, touch the switch briefly.

■ Manual operation To open: Pull the switch back, and hold it until the desired position is reached.

To close: Push the switch forward, and hold it until the desired position is reached.

■ Tilting the moonroof up To tilt: Push on the center of the moonroof switch.

To close: Push the switch forward firmly, then release.

QRG

TOC

Index

1Opening/Closing the Moonroof

3WARNING

Opening or closing the moonroof on someone’s hands or fingers can cause serious injury.

Make sure all hands and fingers are clear of the moonroof before opening or closing it.

NOTICE Opening the moonroof in below freezing temperature or when it is covered with snow or ice can damage the moonroof panel or motor.

The power moonroof can be operated for up to 10 minutes after you turn the ignition switch off. Opening either front door cancels this function.

When resistance is detected, the auto reverse function causes the moonroof to change directions, then stop. Auto reverse stops sensing when the moonroof is almost closed to ensure that it fully closes. Make sure that all objects, including fingers, are clear of the moonroof.

103

2013 TSX13 ACURA TSX 4D-31TL16400.book 104 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

Operating the Switches Around the Steering Wheel

QRG

Ignition Switch

(0 LOCK: Insert and remove the key in this position.

(q ACCESSORY: Operate the audio system and other accessories in this position.

(w ON: This is the position when driving.

(e START: This position is for starting the engine. The switch returns to ON (w when you let go of the key.

1Ignition Switch

Manual transmission models

3WARNING

Removing the key from the ignition switch while driving locks the steering. This can cause you to lose control of the vehicle.

Remove the key from the ignition switch only when parked.

Automatic transmission models You cannot take the key out unless the shift lever is in (P.

All models If you open the driver’s door when the key is in LOCK (0 or ACCESSORY (q, a warning buzzer will sound to remind you to take the key out. When this happens, the following messages appear on the multi-information display: • In LOCK (0: REMOVE KEY. • In ACCESSORY (q: REMOVE KEY. The buzzer will

stop when you take the key out.

If the key won’t turn from LOCK (0 to ACCESSORY (q, turn the key while moving the steering wheel left and right. The steering wheel will unlock, allowing the key to turn.

TOC

Index

104

2013 TSX13 ACURA TSX 4D-31TL16400.book 105 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuOperating the Switches Around the Steering WheeluTurn Signals

QRG

Turn Signals

Right Turn

The turn signals can be used when the ignition switch is in ON (w.

TOC

Left Turn

Light Switches

■ Manual Operation

High Beams

Flashing the high beams

Low Beams

Turns on parking, side marker, tail and license plate lights Turns on headlights, parking, side marker, tail, and license plate lights

Index

1Light Switches

If you remove the key from the ignition switch while the light is on, a chime sounds when the driver’s door is opened.

Repeatedly turning the headlights on and off reduces the life of the HID headlight bulbs. If you sense that the level of the headlights is abnormal, have the vehicle inspected by a dealer.

Do not leave the lights on when the engine is off because it will cause the battery to discharge.

Rotating the light switch turns the lights on and off, regardless of the position of the ignition switch. ■ High beams Push the lever forward until you hear a click. ■ Low beams When in high beams, pull the lever back to return to low beams. ■ Flashing the high beams Pull the lever back, and release it.

Continued

105

2013 TSX13 ACURA TSX 4D-31TL16400.book 106 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuOperating the Switches Around the Steering WheeluLight Switches

■ Automatic Operation (automatic lighting control)

Automatic lighting control can be used when the ignition switch is in ON (w.

When you turn the light switch to AUTO, the headlights and other exterior lights will switch on and off automatically depending on the ambient brightness.

uYou can change the auto light

sensitivity setting. 2 Customized Features P. 80

QRG

TOC

1Automatic Operation (automatic lighting control)

We recommend that you turn on the lights manually when driving at night, in a dense fog, or in dark areas such as long tunnels or parking facilities.

The light sensor is in the location shown below. Do not cover this light sensor with anything; otherwise, the automatic lighting system may not work properly.

Light Sensor

■ Automatic lighting off feature The headlights, all other exterior lights, and the instrument panel lights turn off within 15 seconds after you remove the key and close the driver’s door.

uYou can change the headlight auto off timer setting.

2 Customized Features P. 80

If you turn the ignition switch to LOCK (0 with the headlight switch on, but do not open the door, the lights turn off after 10 minutes (3 minutes, if the switch is in the AUTO position).

The lights turn on again when you unlock or open the driver’s door. If you unlock the door, but do not open it within 15 seconds, the lights go off. If you open the driver’s door, you will hear a lights on reminder chime.

Index

Adjust the auto light sensitivity as follows:

Setting

MAX HIGH MID LOW MIN

The exterior lights come on when the ambient light is at

Bright

Dark

106

2013 TSX13 ACURA TSX 4D-31TL16400.book 107 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

QRG

Fog Lights

uuOperating the Switches Around the Steering WheeluFog Lights

When the low beam headlights are on, turn the fog light switch on to use the fog lights.

1Fog Lights

When the fog lights are on, the indicator in the instrument panel will be on.

2 Indicators P. 64

Fog Light Switch

Daytime Running Lights The high beam headlights come on slightly dimmer than normal when the following conditions have been met:

• The ignition switch is in ON (w.

• The headlight switch is off, or in

• The parking brake is released.

The lights remain on even if you set the parking brake. Turning off the ignition switch will turn off the daytime running lights.

The high beam headlights return to the original brightness once the headlight switch is turned on.

TOC

Index

107

2013 TSX13 ACURA TSX 4D-31TL16400.book 108 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuOperating the Switches Around the Steering WheeluWipers and Washers

QRG

Wipers and Washers ■ Front Wiper/Washer

The windshield wipers and washers can be used when the ignition switch is in ON (w.

■ MIST The wipers run at high speed until you release the lever.

■ Wiper switch (OFF, INT, LO, HI) Change the wiper switch setting according to the amount of rain.

■ Adjusting the delay Turn the adjustment ring to adjust the wiper delay.

Long delay

Short delay

■ Washer Sprays while you pull the lever toward you. When you release the lever, the wipers make two or three more sweeps before stopping.

Pull to use washer.

Intermittent Time Adjustment Ring

MIST OFF INT: Low speed with intermittent LO: Low speed wipe HI: High speed wipe

TOC

Index

108

1Wipers and Washers

NOTICE Do not use the wipers when the windshield is dry. The windshield will get scratched, or the rubber blades will get damaged.

NOTICE In cold weather, the blades may freeze to the windshield, becoming stuck. Operating the wipers in this condition may damage the wipers. Use the defroster to warm the windshield, then turn the wipers on.

If the vehicle speeds up while the wipers are operating intermittently, the length of the wipe interval shortens. When the vehicle starts moving, the wipers make a single sweep. The wiper operation of the shortest delay setting ( and the LO setting become the same when the vehicle speeds up.

Turn the washers off if no washer fluid comes out. The pump may get damaged.

2013 TSX13 ACURA TSX 4D-31TL16400.book 109 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuOperating the Switches Around the Steering WheeluBrightness Control

QRG

Brightness Control

Control Knob

When the parking lights are turned on and the ignition switch is in ON (w, you can use the brightness control knob to adjust instrument panel brightness.

Brighten: Turn the knob to the right.

Dim: Turn the knob to the left.

You will hear a beep when the brightness reaches minimum or maximum. The multi- information display will return to its original state several seconds after you adjust the brightness.

■ Brightness level indicator The brightness level is shown on the multi- information display while you are adjusting it. As the brightness level increases to the right, the instrument panel gets brighter.

1Brightness Control

Instrument panel brightness varies, depending on whether the exterior lights are on or off. The instrument panel dims to reduce glare when they are on.

Pressing either switches the display.

(information) button

If you turn the knob to the right until the brightness display is up to max, the beeper sounds. This cancels the reduced instrument panel brightness when the exterior lights are on.

The brightness can be set differently for when the exterior lights are on, and when they are off.

TOC

Index

109

2013 TSX13 ACURA TSX 4D-31TL16400.book 110 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuOperating the Switches Around the Steering WheeluRear Defogger/Heated Door Mirror Button

QRG

Rear Defogger/Heated Door Mirror Button

Press the rear defogger and heated door mirror button to defog the rear window and mirrors when the ignition is in ON (w.

The rear defogger and heated door mirrors automatically switch off after 10-30 minutes depending on the outside temperature. However, if the outside temperature is 32°F (0°C) or below, they do not automatically switch off.

1Rear Defogger/Heated Door Mirror Button

NOTICE When cleaning the inside of the rear window, be careful not to damage the heating wires. It is critical to wipe the window from side to side along the defogger heating wires.

This system consumes a lot of power, so turn it off when the window has been defogged. Also, do not use the system for a long period when the engine is idling. This may weaken the battery, making it difficult to start the engine.

TOC

Index

110

2013 TSX13 ACURA TSX 4D-31TL16400.book 111 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuOperating the Switches Around the Steering WheeluDriving Position Memory System*

1Driving Position Memory System*

Using the multi-information display, you can disable the automatic seat adjustment function.

2 Customized Features P. 80

You can cancel the driving position memory link and customized settings. Press and hold the lock and unlock buttons at the same time. The LED in the remote transmitter blinks twice and the default settings are restored.

To turn the memory position link settings back on, repeat this procedure. The LED will blink once.

QRG

Driving Position Memory System* You can store two driver’s seat positions with the driving position memory system. When you unlock and open the driver’s door with a remote transmitter, the seat adjusts automatically to one of the two preset positions.

The multi-information display shows you which remote transmitter you used to unlock the vehicle when you enter. • Driver 1 transmitter is linked to memory button 1.

• Driver 2 transmitter is linked to memory button 2.

Driver 1

Driver 2

TOC

Index

* Not available on all models

Continued

111

2013 TSX13 ACURA TSX 4D-31TL16400.book 112 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuOperating the Switches Around the Steering WheeluDriving Position Memory System*

QRG

TOC

Index

112

■ Storing a Position in Memory

Memory Button 1

Memory Button 2

Set Button

1. Adjust the driver’s seat to the desired position, and turn the ignition switch to ON

(w.

2. Press the SET button.

u You will hear the beeper, and the

memory button indicator light will blink.

3. Press memory button (1 or (2 within five

seconds of pressing the SET button. u Once the seat position has been

memorized, the indicator light on the button you pressed stays on.

■ Recalling the Stored Position

Memory Buttons

Automatic transmission models 1. Move the shift lever to (P. All models 2. Apply the parking brake.

3. Press a memory button ((1 or (2).

u You will hear the beeper, and the

indicator light will blink.

The seat will automatically move to the memorized position. When it has finished moving, you will hear the beeper, and the indicator light stays on.

1Storing a Position in Memory

After you press the SET button, the storing operation will be canceled when: • You do not press the memory button within five

seconds.

• You readjust the seat position before the double-

beep.

• You turn the ignition switch to any position except

ON (w.

1Recalling the Stored Position

The seat will stop moving if you: • Press the SET button, or a memory button ((1 or

(2).

• Adjust the seat position. Automatic transmission models • Shift into any position except (P. Manual transmission models • Release the parking brake.

2013 TSX13 ACURA TSX 4D-31TL16400.book 113 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuOperating the Switches Around the Steering WheeluAdjusting the Steering Wheel

1Adjusting the Steering Wheel

3WARNING

Adjusting the steering wheel position while driving may cause you to lose control of the vehicle and be seriously injured in a crash.

Adjust the steering wheel only when the vehicle is stopped.

Make any steering wheel adjustments before you start driving.

QRG

Adjusting the Steering Wheel The steering wheel height and distance from your body can be adjusted so that you can comfortably grip the steering wheel in an appropriate driving posture.

To adjust

To lock

Lever

1. Pull the steering wheel adjustment lever up.

u The steering wheel adjustment lever is

under the steering column.

2. Move the steering wheel up or down, and

in or out. u Make sure you can see the instrument

panel gauges and indicators.

3. Push the steering wheel adjustment lever

down to lock the steering wheel in position. u After adjusting the position, make sure

you have securely locked the steering wheel in place by trying to move it up, down, in, and out.

TOC

Index

113

2013 TSX1Adjusting the Mirror

Keep the inside and outside mirrors clean and adjusted for best visibility.

Adjust the mirrors before you start driving. 2 Adjusting the Seat Positions P. 116

1Automatic Dimming Rearview Mirror

The auto dimming function cancels when the shift position is in (R.

13 ACURA TSX 4D-31TL16400.book 114 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

Adjusting the Mirror

QRG

Interior Rearview Mirror Adjust the angle of the rearview mirror when you are sitting in the correct driving position.

■ Automatic Dimming Rearview Mirror

When driving after dark, the automatic dimming rearview mirror reduces the glare from headlights behind you. Press the auto button to turn this function on and off. When activated, the auto indicator comes on.

You can adjust the door mirrors when the ignition switch is in ON (w.

■ Mirror position adjustment L/R selector switch: Select the left or right mirror. After adjusting the mirror, return the switch to the center position.

Mirror position adjustment switch: Press the switch left, right, up, or down to move the mirror.

TOC

Indicator

Sensor

Auto Button

Power Door Mirrors

Index

Adjustment Switch

Selector Switch

114

2013 TSX13 ACURA TSX 4D-31TL16400.book 115 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuAdjusting the MirroruPower Door Mirrors

■ Reverse Tilt Door Mirror

If activated, the passenger side door mirror automatically tilts downward when you put the shift lever in (R; this improves close-in visibility on the passenger side of the vehicle when backing up. The mirror automatically returns to its original position when you shift out of (R.

Selector Switch

To activate this feature, turn the ignition switch to ON (w and slide the selector switch to the passenger’s side.

QRG

TOC

Index

115

2013 TSX13 ACURA TSX 4D-31TL16400.book 116 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

Adjusting the Seats

QRG

Adjusting the Seat Positions

Adjust the driver’s seat as far back as possible while allowing you to maintain full control of the vehicle. You should be able to sit upright, well back in the seat and be able to adequately press the pedals without leaning forward, and grip the steering wheel comfortably. The passenger’s seat should be adjusted in a similar manner, so that it is as far back from the front airbag in the dashboard as possible.

1Adjusting the Seats

3WARNING

Sitting too close to a front airbag can result in serious injury or death if the front airbags inflate.

Always sit as far back from the front airbags as possible while maintaining control of the vehicle.

The National Highway Traffic Safety Administration and Transport Canada recommend that drivers allow at least 10 inches (25 cm) between the center of the steering wheel and the chest.

Always make seat adjustments before driving.

Seat-back Angle Adjustment

Driver’s seat is shown

Allow sufficient space.

Move back.

■ Adjusting the front seat

Horizontal Position Adjustment

Height Adjustment (Driver’s seat only)

TOC

Index

116

2013 TSX13 ACURA TSX 4D-31TL16400.book 117 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

■ Adjusting the Seat-Backs

Adjust the driver’s seat-back to a comfortable, upright position, leaving ample space between your chest and the airbag cover in the center of the steering wheel.

The front seat passenger should also adjust their seat-back to a comfortable, upright position.

Reclining a seat-back so that the shoulder part of the belt no longer rests against the occupant’s chest reduces the protective capability of the belt. It also increases the chance of sliding under the belt in a crash and being seriously injured. The farther a seat-back is reclined, the greater the risk of injury.

uuAdjusting the SeatsuAdjusting the Seat Positions

1Adjusting the Seat-Backs

3WARNING

Reclining the seat-back too far can result in serious injury or death in a crash.

Adjust the seat-back to an upright position, and sit well back in the seat.

Do not put a cushion, or other object, between the seat-back and your back.

Doing so may interfere with proper seat belt or airbag operation.

If you cannot get far enough away from the steering wheel and still reach the controls, we recommend that you investigate whether some type of adaptive equipment may help.

QRG

TOC

Index

Continued

117

2013 TSX13 ACURA TSX 4D-31TL16400.book 118 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuAdjusting the SeatsuAdjusting the Seat Positions

■ Adjusting the Head Restraints

Your vehicle is equipped with head restraints in all seating positions.

Head restraints are most effective for protection against whiplash and other rear- impact crash injuries when the center of the back of the occupant’s head rests against the center of the restraint. The tops of the occupant’s ears should be level with the center height of the restraint.

Position head in the center of the head restraint.

■ Adjusting the front and rear outer head restraint positions

To raise the head restraint: Pull it upward.

To lower the head restrain: Push it down while pressing the release button.

1Adjusting the Head Restraints

3WARNING

Improperly positioning head restraints reduces their effectiveness and increases the likelihood of serious injury in a crash.

Make sure head restraints are in place and positioned properly before driving.

The driver’s and front passenger’s seats have active head restraints.

2 Active Head Restraints P. 122

QRG

TOC

Index

118

2013 TSX13 ACURA TSX 4D-31TL16400.book 119 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuAdjusting the SeatsuAdjusting the Seat Positions

QRG

TOC

■ Changing the Center Rear Seat Head Restraint Position

A passenger sitting in the center back seating position should adjust the height of their head restraint to an appropriate position before the vehicle begins moving.

To raise the head restraint: Pull it upward.

To lower the head restraint: Push it down while pressing the r release button.

■ Removing and Reinstalling the Head Restraints Head restraints can be removed for cleaning or repair.

To remove a head restraint: Pull the restraint up as far as it will go. Then push the release button, and pull the restraint up and out.

To reinstall a head restraint: Insert the legs back in place, then adjust the head restraint to an appropriate height while pressing the release button. Pull up on the restraint to make sure it is locked in position.

Index

1Removing and Reinstalling the Head Restraints 3WARNING

Failure to reinstall, or correctly reinstall, the head restraints can result in severe injury during a crash.

Always replace the head restraints before driving.

Continued

119

2013 TSX13 ACURA TSX 4D-31TL16400.book 120 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuAdjusting the SeatsuAdjusting the Seat Positions

■ Adjusting the Driver’s Seat Lumbar Support

The firmness of the seat-back can be adjusted. To make it firmer: Pull the lever backward.

To make it less firm: Push the lever forward.

QRG

TOC

Index

120

2013 TSX13 ACURA TSX 4D-31TL16400.book 121 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

■ Maintain a Proper Sitting Position After all occupants have adjusted their seats and head restraints, and put on their seat belts, it is very important that they continue to sit upright, well back in their seats, with their feet on the floor, until the vehicle is safely parked and the engine is off.

Sitting improperly can increase the chance of injury during a crash. For example, if an occupant slouches, lies down, turns sideways, sits forward, leans forward or sideways, or puts one or both feet up, the chance of injury during a crash is greatly increased.

In addition, an occupant who is out of position in the front seat can be seriously or fatally injured in a crash by striking interior parts of the vehicle or being struck by an inflating front airbag.

uuAdjusting the SeatsuAdjusting the Seat Positions

1Maintain a Proper Sitting Position

3WARNING

Sitting improperly or out of position can result in serious injury or death in a crash.

Always sit upright, well back in the seat, with your feet on the floor.

QRG

TOC

Index

Continued

121

2013 TSX13 ACURA TSX 4D-31TL16400.book 122 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuAdjusting the SeatsuAdjusting the Seat Positions

■ Active Head Restraints The driver’s and front passenger’s seats have active head restraints. In a rear impact, an occupant properly secured by a seat belt will be pushed against the seat-back and the head restraint will move forward. This reduces the distance between the restraint and the occupant’s head, which helps reduce the likelihood of whiplash and injuries to the neck and upper spine.

1Active Head Restraints

In order for the active head restraints to operate properly: • Do not hang any items on the head restraints, or

from the restraint legs.

• Do not place any object between an occupant and

the seat-back.

• Install each restraint in its proper location.

After a collision, the activated restraint should return to its normal position. If the restraint does not return to its normal position, or in the event of a severe collision, have the vehicle inspected by a dealer.

QRG

TOC

Index

122

2013 TSX13 ACURA TSX 4D-31TL16400.book 123 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

QRG

Rear Seats ■ Folding Down the Rear Seats

Guide

the guide.

1. Remove the center shoulder belt from

TOC

Index

Center Shoulder Belt

Release Lever

2. Pull the release lever in the trunk to release

the lock.

3. Fold the seat-back down.

If the rear head restraints get caught on the front seat-backs, remove the head restraints.

2 Removing and Reinstalling the Head

Restraints P. 119

uuAdjusting the SeatsuRear Seats

1Folding Down the Rear Seats

The rear seat-backs can be folded down to accommodate bulkier items in the trunk.

Never drive with a seat-back folded down and the trunk lid open.

2 Carbon Monoxide Gas P. 60

To lock a seat-back upright, push it backwards until it locks. When returning a seat-back to it’s original position, push it firmly back. Also, make sure all rear shoulder belts are positioned in front of the seat-back, and the center shoulder belt is re-positioned in the guide.

Make sure that the folded seat-back does not press against the front passenger seat, as this can cause the weight sensors in the front passenger seat to work improperly.

2 Passenger Airbag Off Indicator P. 45

Also make sure all items in the trunk or items extending through the opening into the rear seats are properly secured. Loose items can fly forward if you have to brake hard.

123

2013 TSX13 ACURA TSX 4D-31TL16400.book 124 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuAdjusting the SeatsuArmrest

QRG

Armrest ■ Using the Front Seat Armrest

The console lid can be used as an armrest.

To adjust: Push the release lever and slide the armrest to a desired position. Release the lever to lock the position.

■ Using the Rear Seat Armrest

Pull down the armrest in the center seat-back.

TOC

Index

124

2013 TSX13 ACURA TSX 4D-31TL16400.book 125 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

Interior Lights/Interior Convenience Items

QRG

Interior Lights ■ Interior Light Switches

Front

Door Activated Position

On

Off

Rear

Door Activated Position

On

Off

■ Map Lights

TOC

Index

■ ON The interior lights come on regardless of whether the doors are open or closed. ■ Door activated The interior lights come on in the following situations: • When any of the doors are opened. • You unlock the driver’s door. • You remove the key from the ignition

switch.

■ OFF The interior lights remain off regardless of whether the doors are open or closed.

The map lights can be turned on and off by pressing the lenses.

1Interior Light Switches

In the door activated position, the interior lights fade out and go off about 30 seconds after the doors are closed. The lights go off after 30 seconds in the following situations: • When you unlock the driver’s door but do not open

it.

• When you remove the key from the ignition switch

but do not open a door.

You can change the interior lights dimming time.

2 Customized Features P. 80

The interior lights go off immediately in the following situations: • When you lock the driver’s door. • When you close the driver’s door with the key in

the ignition switch.

• When you turn the ignition switch to ON (w.

If you leave any of the doors open without the key in the ignition switch, the interior lights go off after about 15 minutes.

1Map Lights

When the ceiling light switch is in the door activated position and any door is open, the map light will not go off when you press the lens.

125

2013 TSX13 ACURA TSX 4D-31TL16400.book 126 ページ ２０１２年７月２７日　金曜日　午前１１時３１分

uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items