You should never pump the brake pedal. Let the ABS work for you by always keeping firm, steady pressure on the brake pedal. This is sometimes referred to as “stomp and steer.”
■ ABS operation The brake pedal may pulsate slightly when the ABS is working. Keep holding the pedal firmly down. On dry pavement, you will need to press on the brake pedal very hard before the ABS activates. However, you may feel the ABS activate immediately if you are trying to stop on snow or ice.
When the vehicle speed goes under 6 mph (10 km/h), the ABS stops.
TOC
Index
212
1ABS (Anti-lock Brake System)
NOTICE The ABS may not function correctly if you use an incorrect tire type and size.
When the ABS indicator comes on while driving, there may be a problem with the system. While normal braking is not affected, there is a possibility of the ABS not operating. Have the vehicle checked by a dealer immediately.
The ABS does not reduce the time or distance it takes to stop the vehicle. It only helps with steering control during hard braking.
In the following cases, your vehicle may need more stopping distance than a vehicle without the ABS: • When driving on rough road surfaces, including
when driving on uneven surfaces, such as gravel or snow.
• When tire chains are installed.
You may hear a motor sound coming from the engine compartment while system checks are being performed immediately after starting the engine or while driving. This is normal.
2013 TSX13 ACURA TSX 4D-31TL16400.book 213 ページ 2012年7月27日 金曜日 午前11時31分
QRG
Brake Assist System ■ Brake Assist System Designed to assist the driver by generating greater braking force when you depress the brake pedal hard during emergency braking.
■ Brake assist system operation Press the brake pedal firmly for more powerful braking.
When brake assist operates, the pedal may wiggle slightly and an operating noise may be heard. This is normal. Keep holding the brake pedal firmly down.
uuBrakinguBrake Assist System
TOC
Index
213
2013 TSX13 ACURA TSX 4D-31TL16400.book 214 ページ 2012年7月27日 金曜日 午前11時31分
Parking Your Vehicle
QRG
When Stopped 1. Depress the brake pedal firmly.
2. Firmly apply the parking brake.
Automatic transmission models 3. Move the shift lever from (D to (P.
Manual transmission models 3. Move the shift lever to (R.
4. Turn off the engine.
Always set the parking brake firmly, in particular if you are parked on an incline.
TOC
Index
214
1Parking Your Vehicle
Do not park your vehicle near flammable objects, such as dry grass, oil, or timber. Heat from the exhaust can cause a fire.
1When Stopped
NOTICE Automatic transmission models The following can damage the transmission: • Depressing the accelerator and brake pedals
simultaneously.
• Holding the vehicle in place when facing uphill by
depressing the accelerator pedal.
• Moving the shift lever into (P before the vehicle
stops completely.
Raise the wiper arms when snow is expected.
2013 TSX13 ACURA TSX 4D-31TL16400.book 215 ページ 2012年7月27日 金曜日 午前11時31分
Refueling
QRG
Fuel Information ■ Fuel recommendation Unleaded premium gasoline, pump octane number 91 or higher
4-cylinder models Use of lower octane gasoline can cause occasional metallic knocking noise in the engine and will result in decreased engine performance. Use of gasoline with a pump octane less than 87 can lead to engine damage. 6-cylinder models Your vehicle is designed to operate on premium unleaded gasoline with a pump octane of 91 or higher. If this octane grade is unavailable, regular unleaded gasoline with a pump octane of 87 or higher may be used temporally. The use of regular unleaded gasoline can cause metallic knocking noises in the engine and will result in decreased engine performance. The long-term use of regular-grade gasoline can lead to engine damage.
■ Top tier detergent gasoline Because the level of detergency and additives in gasoline vary in the market, Acura endorses the use of “TOP TIER Detergent Gasoline” where available to help maintain the performance and reliability of your vehicle. TOP TIER Detergent Gasoline meets a new gasoline standard jointly established by leading automotive manufacturers to meet the needs of today’s advanced engines. Qualifying gasoline retailers will, in most cases, identify their gasoline as having met “TOP TIER Detergent Gasoline” standards at the retail location. This fuel is guaranteed to contain the proper level of detergent additives and be free of metallic additives. The proper level of detergent additives, and absence of harmful metallic additives in gasoline, help avoid build-up of deposits in your engine and emission control system.
TOC
Index
1Fuel Information
NOTICE We recommend quality gasoline containing detergent additives that help prevent fuel system and engine deposits. In addition, in order to maintain good performance, fuel economy, and emissions control, we strongly recommend, the use of gasoline that does NOT contain harmful manganese-based fuel additives such as MMT, if such gasoline is available.
Use of gasoline with these additives may adversely affect performance, and cause the malfunction indicator lamp on your instrument panel to come on. If this happens, contact a dealer for service.
Continued
215
2013 TSX13 ACURA TSX 4D-31TL16400.book 216 ページ 2012年7月27日 金曜日 午前11時31分
uuRefuelinguHow to Refuel
QRG
For further important fuel-related information for your vehicle, or on information on gasoline that does not contain MMT, visit My Acura at owners.acura.com In Canada, visit www.acura.ca for additional information on gasoline. For more information on top tier gasoline, visit www.toptiergas.com.
■ Gasoline containing ethanol Some gasoline today is blended with oxygenates such as ethanol. Your vehicle is designed to operate on oxygenated gasoline containing up to 10% ethanol by volume. Do not use gasoline containing methanol. If you notice any undesirable operating symptoms, try another service station or switch to another brand of gasoline.
■ Fuel tank capacity: 18.5 US gal (70 liters)
TOC
How to Refuel
To Lock
To Unlock
1. Stop your vehicle with the service
station pump on the left side of the vehicle in the rear.
2. Turn off the engine.
3. Unlock the driver’s door using the master
door lock switch. u The fuel fill door on the outer side of the
Master Door Lock Switch
vehicle will unlock.
Index
216
1How to Refuel
3WARNING
Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel.
• Stop the engine, and keep heat, sparks,
and flame away.
• Handle fuel only outdoors. • Wipe up spills immediately.
2013 TSX13 ACURA TSX 4D-31TL16400.book 217 ページ 2012年7月27日 金曜日 午前11時31分
Fuel Fill Door
4. Press the area indicated by the arrow to release the fuel fill door. You will hear a click.
Press
QRG
TOC
Cap
Cap
Index
Holder
uuRefuelinguHow to Refuel
1How to Refuel
Use the master door lock switch to unlock the fuel fill door.
The vehicle doors and fuel fill door automatically relock if the remote unlock function is used. This can be deactivated by briefly opening then closing the driver’s door.
NOTICE The fuel fill door and its latching mechanism can be permanently damaged if the fuel fill door is forced closed when the driver’s door is locked.
The filler nozzle automatically stops to leave space in the fuel tank so that fuel does not overflow as a result of changes in air temperature.
If the fuel nozzle keeps turning off when the tank is not full, there may be a problem with the pump’s fuel vapor recovery system. Try filling at another pump. If this does not fix the problem, consult a dealer.
Do not continue to add fuel after the nozzle has automatically stopped. Additional fuel can exceed the full tank capacity.
217
5. Remove the fuel fill cap slowly. If you hear a release of air, wait until this stops, then turn the knob slowly to open the fuel fill cap.
6. Place the fuel fill cap in the holder.
7. Insert the filler nozzle fully.
u When the tank is full, the fuel nozzle will click off automatically. This leaves space in the fuel tank in case the fuel expands with a change in the temperature.
8. After filling, replace the fuel fill cap, tightening it until you hear it click at least once. u Shut the fuel fill door by hand.
2013 TSX1Improving Fuel Economy
Direct calculation is the recommended method to determine actual fuel consumed while driving.
Miles driven
Gallons of
fuel
Miles per
Gallon
100
Liter
Kilometers
L per 100 km
In Canada, posted fuel economy numbers are established following a simulated test. For more information on how this test is performed, please visit http://oee.nrcan.gc.ca/
13 ACURA TSX 4D-31TL16400.book 218 ページ 2012年7月27日 金曜日 午前11時31分
Fuel Economy
QRG
Improving Fuel Economy Fuel economy depends on several conditions, including driving conditions, your driving habits, the condition of your vehicle, and loading. Depending on these and other conditions, you may or may not achieve the rated fuel economy of this vehicle.
■ Maintenance and Fuel Economy You can optimize your fuel economy with proper maintenance of your vehicle. Always maintain your vehicle in accordance with the messages displayed on the multi-information display. • Use the recommended viscosity engine oil, displaying the API Certification Seal.
• Maintain the specified tire pressure.
• Do not load the vehicle with excess cargo.
• Keep your vehicle clean. A buildup of snow or mud on your vehicle’s underside
adds weight and increases wind resistance.
TOC
Index
218
2013 TSX13 ACURA TSX 4D-31TL16400.book 219 ページ 2012年7月27日 金曜日 午前11時31分
Accessories and Modifications
QRG
Accessories When installing accessories, check the following: • Do not install accessories on the windshield. They can obstruct your view and
delay your reaction to driving conditions.
• Do not install accessories on the side pillars or across the side windows.
Accessories installed in these areas may interfere with proper operation of the side curtain airbags.
• Be sure electronic accessories do not overload electrical circuits or interfere with
proper operation of your vehicle.
2 Fuses P. 294
• Before installing any electronic accessory, have the installer contact a dealer for
assistance. If possible, have a dealer inspect the final installation.
TOC
Index
Modifications Do not modify your vehicle or use non-Acura components that can affect its handling, stability, and reliability.
Overall vehicle performance can be affected. Always make sure all equipment is properly installed and maintained, and that it meets federal, state, province, territory, and local regulations.
1Accessories and Modifications
3WARNING
Improper accessories or modifications can affect your vehicle’s handling, stability, and performance, and cause a crash in which you can be seriously hurt or killed.
Follow all instructions in this owner’s manual regarding accessories and modifications.
Acura Genuine accessories are recommended to ensure proper operation on your vehicle.
219
2013 TSX13 ACURA TSX 4D-31TL16400.book 220 ページ 2012年7月27日 金曜日 午前11時31分
QRG
Index
220
2013 TSX13 ACURA TSX 4D-31TL16400.book 221 ページ 2012年7月27日 金曜日 午前11時31分
QRG
Maintenance
This chapter discusses basic maintenance.
Before Performing Maintenance
Inspection and Maintenance ............ 222
Safety When Performing Maintenance...223
Parts and Fluids Used in Maintenance
Service ........................................... 224
Maintenance MinderTM..................... 225
Maintenance Under the Hood
Maintenance Items Under the Hood.. 229
Opening the Hood ........................... 231
Recommended Engine Oil ................ 234
Oil Check......................................... 235
Adding Engine Oil............................ 237
Engine Coolant ................................ 240
Transmission Fluid............................ 242
Brake/Clutch Fluid............................ 244
Refilling Window Washer Fluid......... 246
Replacing Light Bulbs ....................... 247
Checking and Maintaining Wiper
Blades .......................................... 257
Checking and Maintaining Tires
Checking Tires ................................. 259
Tire and Loading Information Label .. 260
Tire Labeling .................................... 260
DOT Tire Quality Grading (U.S. Vehicles)..262
Wear Indicators ............................... 264
Tire Service Life................................ 264
Tire and Wheel Replacement ........... 265
Tire Rotation.................................... 266
Winter Tires ..................................... 267
Battery............................................... 268
Remote Transmitter Care................. 269
Replacing the Battery....................... 269
Climate Control System Maintenance ..270
Cleaning
Interior Care .................................... 271
Exterior Care.................................... 273
Index
221
2013 TSX13 ACURA TSX 4D-31TL16400.book 222 ページ 2012年7月27日 金曜日 午前11時31分
Before Performing Maintenance
QRG
Inspection and Maintenance For your safety, perform all listed inspections and maintenance to keep your vehicle in good condition. If you become aware of any abnormality (noise, smell, insufficient brake fluid, oil residue on the ground, etc.), have your vehicle inspected by a dealer. (Note, however, that service at a dealer is not mandatory to keep your warranties in effect.) Refer to the separate maintenance booklet for detailed maintenance and inspection information.
■ Types of Inspection and Maintenance ■ Daily inspections Perform inspections before long distance trips, when washing the vehicle, or when refueling.
■ Periodic inspections • Check the automatic transmission fluid level monthly.
2 Automatic Transmission Fluid P. 242
• Check the brake fluid level monthly.
2 Brake/Clutch Fluid P. 244
• Check the tire pressure monthly. Examine the tread for wear and foreign objects.
2 Checking and Maintaining Tires P. 259
• Check the operation of the exterior lights monthly.
2 Replacing Light Bulbs P. 247
TOC
• Check the condition of the wiper blades at least every six months.
Index
2 Checking and Maintaining Wiper Blades P. 257
222
1Inspection and Maintenance
U.S. models Maintenance, replacement, or repair of emissions control devices and systems may be done by any automotive repair establishment or individuals using parts that are “certified” to EPA standards.
According to state and federal regulations, failure to
perform maintenance on the maintenance main
items marked with # will not void your emissions
warranties. However, all maintenance services should
be performed in accordance with the intervals
indicated by the multi-information display.
2 Maintenance Service Items P. 227
If you want to perform complex maintenance tasks that require more skills and tools, purchase the service manual.
2 Authorized Manuals P. 315
If you want to perform maintenance yourself, make sure that you have the necessary tools and skills first. After performing maintenance, update the records in the separate maintenance booklet.
2013 TSX13 ACURA TSX 4D-31TL16400.book 223 ページ 2012年7月27日 金曜日 午前11時31分
uuBefore Performing MaintenanceuSafety When Performing Maintenance
QRG
Safety When Performing Maintenance Some of the most important safety precautions are given here. However, we cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task.
■ Maintenance Safety • To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames
away from the battery and all fuel related parts. Never leave rags, towels, or other flammable objects under the hood. u Heat from the engine and exhaust can ignite them causing a fire.
• To clean parts, use a commercially available degreaser or parts cleaner,
not gasoline.
• Wear eye protection and protective clothing when working with the battery or
compressed air.
• Engine exhaust contains carbon monoxide, which is poisonous and can kill you.
u Only operate the engine if there is sufficient ventilation.
■ Vehicle Safety • The vehicle must be in a stationary condition.
u Make sure your vehicle is parked on level ground, the parking brake is set, and
the engine is off.
• Be aware that hot parts can burn you.
u Make sure to let the engine and exhaust system cool thoroughly before
touching vehicle parts.
• Be aware that moving parts can injure you.
u Do not start the engine unless instructed, and keep your hands and limbs away
from moving parts.
TOC
Index
1Safety When Performing Maintenance
3WARNING
Improperly maintaining this vehicle or failing to correct a problem before driving can cause a crash in which you can be seriously hurt or killed.
Always follow the inspection and maintenance recommendations according to the schedules in this owner’s manual.
3WARNING
Failure to properly follow maintenance instructions and precautions can cause you to be seriously hurt or killed.
Always follow the procedures and precautions in this owner’s manual.
223
2013 TSX13 ACURA TSX 4D-31TL16400.book 224 ページ 2012年7月27日 金曜日 午前11時31分
uuBefore Performing MaintenanceuParts and Fluids Used in Maintenance Service
QRG
Parts and Fluids Used in Maintenance Service The use of Acura genuine parts and fluids is recommended when maintaining and servicing your vehicle. Acura genuine parts are manufactured according to the same high quality standards used in Acura vehicles.
TOC
Index
224
2013 TSX13 ACURA TSX 4D-31TL16400.book 225 ページ 2012年7月27日 金曜日 午前11時31分
Maintenance MinderTM
If the engine oil life is less than 15%, you will see the Maintenance Minder messages appear on the multi-information display every time you turn the ignition switch to ON (w. The messages notify you when to change the engine oil, or when to bring your vehicle to a dealer for indicated maintenance services.
■ Displaying the Engine Oil Life 1. Turn the ignition switch to ON (w.
2. Press the SEL/RESET button repeatedly until the engine oil life appears on the
multi-information display.
Maintenance Service Items
Remaining Engine Oil Life
SEL/RESET Button
QRG
TOC
1Displaying the Engine Oil Life
Based on the engine operating conditions, the remaining engine oil life is calculated and displayed as a percentage.
Displayed Engine Oil
Calculated Engine Oil
Life (%)
100
90
80
70
60
50
40
30
20
15
10
Life (%)
100 to 91
90 to 81
80 to 71
70 to 61
60 to 51
50 to 41
40 to 31
30 to 21
20 to 16
15 to 11
10 to 6
5 to 1
Index
The system message indicator ( Minder message.
) comes on along with the Maintenance
Continued
225
2013 TSX13 ACURA TSX 4D-31TL16400.book 226 ページ 2012年7月27日 金曜日 午前11時31分
uuMaintenance MinderTMu
QRG
■ Maintenance Minder Messages on the Multi-Information Display
Maintenance Message
Oil Life Display
Explanation
Information
SERVICE DUE SOON
15%
The remaining engine oil life is 15 to 6 percent. Once you switch the display by pressing the (Information) button this message will go off.
The engine oil is approaching the end of its service life, and the maintenance items should be inspected and serviced soon.
SERVICE DUE NOW
5%
SERVICE PAST DUE
Negative Distance
U.S.
Canada
U.S.
Canada
The remaining engine oil life is 5 to 1 percent. Press the button to switch to another display.
The engine oil has almost reached the end of its service life, and the maintenance items should be inspected and serviced as soon as possible.
The remaining engine oil life has passed its service life, and a negative distance appears after driving over 10 miles (U.S. models) or 10 km (Canadian models). Press the button to switch to another display.
The engine oil life has passed. The maintenance items must be inspected and serviced immediately.
TOC
Index
226
2013 TSX13 ACURA TSX 4D-31TL16400.book 227 ページ 2012年7月27日 金曜日 午前11時31分
uuMaintenance MinderTMu
QRG
■ Maintenance Service Items
System Message Indicator
1Maintenance Service Items
• Independent of the Maintenance Minder
information, replace the brake fluid every 3 years.
Maintenance Minder Message
• Inspect idle speed every 160,000 miles (256,000
km).
• Adjust the valves during services A, B, 1, 2, or 3 if
they are noisy.
Main Items
Sub Items
Maintenance Main Items
CODE
Maintenance Sub Items
CODE
TOC
Index
● Replace engine oil*1
● Replace engine oil*1 and oil filter
● Inspect front and rear brakes
● Check parking brake adjustment
● Inspect tie rod ends, steering gear box, and boots
● Inspect suspension components
● Inspect driveshaft boots
● Inspect brake hoses and lines (Including ABS)
● Inspect all fluid levels and condition of fluids
● Inspect exhaust system#
● Inspect fuel lines and connections#
*1:
*2:
*3:
If message, SERVICE DUE NOW does not appear more than 12 months after the display is reset, change the engine oil every year. If you drive primarily in dusty conditions, replace the air cleaner element every 15,000 miles (24,000 km). If you drive primarily in urban areas that have high concentrations of soot in the air from industry and from diesel-powered vehicles, replace the dust and pollen filter every 15,000 miles (24,000 km).
*5:
# :
● Rotate tires
● Replace air cleaner element*2
● Replace dust and pollen filter*3
● Inspect drive belt
● Replace transmission fluid*4
● Replace spark plugs
● Replace timing belt and inspect water pump*5
● Inspect valve clearance
● Replace engine coolant
*4: Driving in mountainous areas at very low vehicle speeds or trailer towing results in higher transmission
temperatures. This requires transmission fluid changes more frequently than recommended by the Maintenance Minder. If you regularly drive your vehicle under these conditions, have the transmission fluid changed at 60,000 miles (100,000 km), then every 30,000 miles (48,000 km). (For A/T only.) If you drive regularly in very high temperatures (over 110°F, 43 °C), in very low temperatures (under -20°F, -29°C), or tow a trailer, replace every 60,000 miles/100,000 km. (6-cylinder models only) See information on maintenance and emissions warranty.
Continued
227
2013 TSX1Resetting the Display
NOTICE Failure to reset the engine oil life after a maintenance service results in the system showing incorrect maintenance intervals, which can lead to serious mechanical problems.
The dealer will reset the engine oil life display after completing the required maintenance service. If someone other than a dealer performs maintenance service, reset the engine oil life display yourself.
13 ACURA TSX 4D-31TL16400.book 228 ページ 2012年7月27日 金曜日 午前11時31分
uuMaintenance MinderTMu
QRG
■ Resetting the Display Reset the engine oil life display if you have performed the maintenance service.
Maintenance Item Codes
Engine Oil Life
(Information)
Button
SEL/RESET Button
TOC
Index
228
1. Turn the ignition switch to ON (w.
2. Display the engine oil life by repeatedly pressing the SEL/RESET button.
3. Press and hold the SEL/RESET button for 10 seconds or more.
u The oil life reset mode is displayed on the multi-information display.
4. Select RESET with the
button.
u The service code will disappear and the engine oil life display will return
to 100%.
To cancel the oil life reset mode, select CANCEL, then press the SEL/RESET button.
2013 TSX13 ACURA TSX 4D-31TL16400.book 229 ページ 2012年7月27日 金曜日 午前11時31分
Maintenance Under the Hood
QRG
Maintenance Items Under the Hood 4-cylinder models
Brake Fluid (Black Cap)
Engine Oil Dipstick (Orange Handle)
Washer Fluid (Blue Cap)
Engine Coolant Reservoir
Radiator Cap
TOC
Index
Manual transmission models Clutch Fluid (Light Gray Cap)
Engine Oil Fill Cap
Automatic transmission models Automatic Transmission Fluid Dipstick (Yellow Loop)
Continued
229
2013 TSX13 ACURA TSX 4D-31TL16400.book 230 ページ 2012年7月27日 金曜日 午前11時31分
uuMaintenance Under the HooduMaintenance Items Under the Hood
QRG
6-cylinder models
Engine Oil Dipstick (Orange Loop)
Washer Fluid (Blue Cap)
Engine Coolant Reservoir*
Radiator Cap*
*: Located under the cover
TOC
Index
230
Brake Fluid (Black Cap)
Engine Oil Fill Cap
Automatic Transmission Fluid Dipstick (Yellow Loop)
2013 TSX13 ACURA TSX 4D-31TL16400.book 231 ページ 2012年7月27日 金曜日 午前11時31分
uuMaintenance Under the HooduOpening the Hood
QRG
Opening the Hood
Hood Release Handle
Pull
1. Park the vehicle on a level surface, and set
1Opening the Hood
the parking brake.
2. Pull the hood release handle under the
lower left corner of the dashboard. u The hood will pop up slightly.
NOTICE Do not open the hood when the wiper arms are raised. The hood will strike the wipers, and may damage either the hood or the wipers.
When closing the hood, check that the hood is securely latched.
3. Push up the hood latch lever in the center of the hood to release the lock mechanism, and open the hood.
If the hood latch lever moves stiffly, or if you can open the hood without lifting the lever, the latch mechanism should be cleaned and lubricated.
TOC
Lever
Index
Grip
Support Rod
Clamp
4-cylinder models 4. Remove the support rod from the clamp using the grip. Mount the support rod in the hood.
When closing, remove the support rod, and stow it in the clamp, then gently lower the hood. Remove your hand at a height of approximately 12 inches (30 cm) and let the hood close.
Continued
231
2013 TSX13 ACURA TSX 4D-31TL16400.book 232 ページ 2012年7月27日 金曜日 午前11時31分
uuMaintenance Under the HooduOpening the Hood
6-cylinder models 4. Lift the hood up most of the way.
u The hydraulic supports will lift it up the
rest of the way and hold it up.
When closing, lower it to approximately 12 inches (30 cm), then press down firmly with your hands.
QRG
TOC
Index
232
2013 TSX13 ACURA TSX 4D-31TL16400.book 233 ページ 2012年7月27日 金曜日 午前11時31分
uuMaintenance Under the HooduEngine Compartment Covers*
QRG
Engine Compartment Covers* The component parts in the engine compartment are protected by three covers. You may need to remove the covers when you perform certain maintenance work.
To remove the covers:
1Engine Compartment Covers*
Insert a flat-tip screwdriver, lift and remove the central pin to remove the clip.
Right Engine Compartment Cover Remove the holding clips
TOC
Index
Insert the clip with the central pin raised, and push until it is flat.
Push until the pin is flat
Bulkhead Cover Remove the holding clips
Left Engine Compartment Cover Remove the holding clips
* Not available on all models
233
2013 TSX1Recommended Engine Oil Engine Oil Additives Your vehicle does not require oil additives. In fact, they may adversely affect the engine performance and durability.
13 ACURA TSX 4D-31TL16400.book 234 ページ 2012年7月27日 金曜日 午前11時31分
uuMaintenance Under the HooduRecommended Engine Oil
QRG
Recommended Engine Oil
• Genuine Acura Motor Oil • Premium-grade 0W-20 detergent oil with an API Certification Seal on the
container.
Oil is a major contributor to your engine’s performance and longevity. If you drive the vehicle with insufficient or deteriorated oil, the engine may fail or be damaged.
This seal indicates the oil is energy conserving and that it meets the American Petroleum Institute’s latest requirements.
Use Genuine Acura Motor Oil or another commercial engine oil of suitable viscosity for the ambient temperature as shown below.
Ambient Temperature
■ Synthetic oil You may also use synthetic motor oil if it is labeled with the API Certification Seal and is the specified viscosity grade.
TOC
Index
234
2013 TSXuuMaintenance Under the HooduOil Check
1Oil Check
If the oil level is near or below the lower mark, slowly add oil being careful not to overfill.
13 ACURA TSX 4D-31TL16400.book 235 ページ 2012年7月27日 金曜日 午前11時31分
QRG
Oil Check We recommend that you check the engine oil level every time you refuel. Park the vehicle on level ground.
Wait approximately three minutes after turning the engine off before you check the oil. 4-cylinder models
4-cylinder models 1. Remove the dipstick (orange handle).
6-cylinder models 1. Remove the dipstick (orange loop).
All models 2. Wipe the dipstick with a clean cloth or
paper towel.
6-cylinder models
3. Insert the dipstick back all the way into
its hole.
TOC
Index
Continued
235
2013 TSX13 ACURA TSX 4D-31TL16400.book 236 ページ 2012年7月27日 金曜日 午前11時31分
uuMaintenance Under the HooduOil Check
QRG
4-cylinder models
4. Remove the dipstick again, and check the level. It should be between the upper and lower marks. Add oil if necessary.
6-cylinder models
Upper Mark Lower Mark
Upper Mark Lower Mark
TOC
Index
236
2013 TSX13 ACURA TSX 4D-31TL16400.book 237 ページ 2012年7月27日 金曜日 午前11時31分
QRG
Adding Engine Oil
4-cylinder models
1. Unscrew and remove the engine oil fill cap.
1Adding Engine Oil
uuMaintenance Under the HooduAdding Engine Oil
2. Add oil slowly.
3. Reinstall the engine oil fill cap, and tighten
it securely.
4. Wait for three minutes and recheck the
engine oil dipstick.
If any oil spills, wipe it up immediately. Spilled oil may damage the engine compartment components.
NOTICE Do not fill the engine oil above the upper mark. Overfilling the engine oil can result in leaks and engine damage.
Engine Oil Fill Cap
6-cylinder models
Engine Oil Fill Cap
TOC
Index
237
2013 TSX1Changing the Engine Oil and Oil Filter
NOTICE You may damage the environment if you do not dispose of the oil in a suitable way. If you are changing the oil by yourself, appropriately dispose of the used oil. Put the oil in a sealed container and take it to a recycling center. Do not throw the oil away into a garbage can or onto the ground.
13 ACURA TSX 4D-31TL16400.book 238 ページ 2012年7月27日 金曜日 午前11時31分
uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter
QRG
Changing the Engine Oil and Oil Filter You must change the engine oil and oil filter regularly in order to maintain the engine’s lubrication. The engine may be damaged if they are not changed regularly.
Change the oil and filter in accordance with the maintenance message on the multi- information display. 4-cylinder models
1. Run the engine until it reaches normal
operating temperature, and then turn the engine off.
Bolt
Under Cover
4-cylinder models
Drain Bolt
Washer
2. Open the hood and remove the engine oil
fill cap.
4-cylinder models 3. Remove the bolts on the undercarriage
and remove the under cover.
All models 4. Remove the drain bolt and washer from the bottom of the engine, and drain the oil into a suitable container.
5. Remove the oil filter and dispose of the
remaining oil.
6. Check that the filter gasket is not stuck to
the engine contact surface. u If it is stuck, you must detach it.
TOC
Index
238
2013 TSX13 ACURA TSX 4D-31TL16400.book 239 ページ 2012年7月27日 金曜日 午前11時31分
uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter
QRG
6-cylinder models
Drain Bolt
Washer
4-cylinder models
6-cylinder models
Oil Filter
Oil Filter
TOC
Index
7. Wipe away dirt and dust adhering to the contact surface of the engine block, and install a new oil filter.
8. Put a new washer on the drain bolt, then
reinstall the drain bolt. u Tightening torque: 29 lbf∙ft (39 N∙m,
4.0 kgf∙m)
9. Pour the recommended engine oil into
the engine. u Engine oil change capacity (including
1Changing the Engine Oil and Oil Filter
You will need a special wrench to replace the oil filter. You can buy this wrench from a dealer.
When installing the new oil filter follow the instructions supplied with the oil filter.
Reinstall the engine oil fill cap. Start the engine. The low oil pressure indicator should go off within five seconds. If it does not, turn off the engine, and check your work.
filter): 4-cylinder models 4.2 US qt (4.0 L) 6-cylinder models 4.5 US qt (4.3 L)
10. Reinstall the engine oil fill cap securely
and start the engine.
11. Run the engine for a few minutes, and
then check that there is no leak from the drain bolt or oil filter.
12. Stop the engine, wait for three
minutes, and then check the oil level on the dipstick. u If necessary, add more engine oil.
239
2013 TSX13 ACURA TSX 4D-31TL16400.book 240 ページ 2012年7月27日 金曜日 午前11時31分
uuMaintenance Under the HooduEngine Coolant
QRG
Engine Coolant
Specified coolant: Honda Long Life Antifreeze/Coolant Type 2
1Engine Coolant
This coolant is premixed with 50% antifreeze and 50% water. Do not add any straight antifreeze or water.
We recommend you check the engine coolant level every time you refuel. Check the reserve tank first. If it is completely empty, also check the coolant level in the radiator. Add the engine coolant accordingly.
■ Reserve Tank
Reserve Tank
MAX MIN
Reserve Tank
6-cylinder models 1. Remove the right-side engine
compartment cover.
2 Engine Compartment Covers P. 233
All models 2. Check the amount of coolant in the
reserve tank.
3. If the coolant level is below the MIN mark,
add the specified coolant until it reaches the MAX mark.
4. Inspect the cooling system for leaks.
NOTICE 4-cylinder models If temperatures consistently below -22°F (-30°C) are expected, the coolant mixture should be changed to a higher concentration. Consult a dealer for more information.
If Honda antifreeze/coolant is not available, you may use another major brand non-silicate coolant as a temporary replacement. Check that it is a high quality coolant recommended for aluminum engines. Continued use of any non-Honda coolant can result in corrosion, causing the cooling system to malfunction or fail. Have the cooling system flushed and refilled with Honda antifreeze/coolant as soon as possible.
Do not add rust inhibitors or other additives to your vehicle’s cooling system. They may not be compatible with the coolant or with the engine components.
TOC
Index
240
2013 TSX13 ACURA TSX 4D-31TL16400.book 241 ページ 2012年7月27日 金曜日 午前11時31分
QRG
■ Radiator
Radiator Cap
TOC
Index
uuMaintenance Under the HooduEngine Coolant
1Radiator
3WARNING
Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you.
Always let the engine and radiator cool down before removing the radiator cap.
NOTICE Pour the fluid slowly and carefully so you do not spill any. Clean up any spills immediately; they can damage components in the engine compartment.
6-cylinder models 1. Remove the radiator cap cover. All models 2. Make sure the engine and radiator
are cool.
3. Turn the radiator cap counterclockwise and relieve any pressure in the coolant system. Do not push the cap down when turning.
4. Push down and turn the radiator cap
counterclockwise to remove it.
5. The coolant level should be up to the base
of the filler neck. Add coolant if it is low.
6. Put the radiator cap back on, and tighten
it fully.
7. Pour coolant into the reserve tank until it reaches the MAX mark. Put the cap back on the reserve tank.
241
2013 TSX13 ACURA TSX 4D-31TL16400.book 242 ページ 2012年7月27日 金曜日 午前11時31分
uuMaintenance Under the HooduTransmission Fluid
QRG
Transmission Fluid ■ Automatic Transmission Fluid
Specified fluid: Acura ATF DW-1 (automatic transmission fluid)
Check the fluid level when the engine is at normal operating temperature. 4-cylinder models
1. Park on level ground, and start the engine.
Upper Lower Marks
6-cylinder models
Rubber Cap
Guide
HOT Range
Upper Mark Lower Mark
2. Wait until the radiator fan starts and then
turn off the engine. u Perform step 3 after waiting for about 60
seconds (less than 90 seconds).
3. Remove the dipstick (yellow loop) from the transmission and wipe it with a clean cloth.
4. Insert the dipstick all the way back into the transmission securely, as shown in the
image.
5. Remove the dipstick and check the
fluid level. u It should be between the upper and
lower marks in the HOT range.
6. If the level is below the lower mark,
add fluid into the dipstick hole to bring it to the level between the upper and lower marks, and have your vehicle checked by a dealer immediately.
TOC
Index
242
1Automatic Transmission Fluid
NOTICE Do not mix Acura ATF DW-1 with other transmission fluids. Using a transmission fluid other than Acura ATF DW-1 may adversely affect the operation and durability of your vehicle’s transmission, and damage the transmission.
Any damage caused by using a transmission fluid that is not equivalent to Acura ATF DW-1 is not covered by Acura’s new vehicle warranty.
NOTICE Pour the fluid slowly and carefully so you do not spill any. Clean up any spills immediately; they can damage components in the engine compartment.
2013 TSX13 ACURA TSX 4D-31TL16400.book 243 ページ 2012年7月27日 金曜日 午前11時31分
QRG
■ Manual Transmission Fluid
Specified fluid: Acura Manual Transmission Fluid (MTF)
Check the fluid level when the engine is at normal operating temperature. Under Cover
1. Park the vehicle on level ground.
2. Remove the bolts with a wrench, then
carefully remove the under cover.
uuMaintenance Under the HooduTransmission Fluid
1Manual Transmission Fluid
If Acura MTF is not available, you may use the API certificated SAE 0W-20 or 5W-20 viscosity motor oil as a temporary measure.
Replace with MTF as soon as possible. Motor oil does not contain the proper additives for the transmission and continued use can cause decreased shifting performance and lead to transmission damage.
Bolt
TOC
Index
3. Remove the transmission filler bolt and
washer. Carefully feel inside the bolt hole with your fingers. u Check if the fluid level is up to the edge
of the bolt hole.
4. If the fluid level is not up to the edge of the bolt hole, add Acura Manual Transmission Fluid (MTF) until it runs out of the hole.
5. Put a new washer on the filler bolt, then
reinstall the filler bolt. u Tightening torque:
33 lbf∙ft (44 N∙m, 4.5 kgf∙m)
6. Reinstall the under cover with the bolts.
243
2013 TSX13 ACURA TSX 4D-31TL16400.book 244 ページ 2012年7月27日 金曜日 午前11時31分
uuMaintenance Under the HooduBrake/Clutch Fluid
QRG
Brake/Clutch Fluid
Specified fluid: Honda Heavy Duty Brake Fluid DOT 3
1Brake/Clutch Fluid
NOTICE Brake fluid marked DOT 5 is not compatible with your vehicle’s braking system and can cause extensive damage.
If the specified brake fluid is not available, you should use only DOT 3 or DOT 4 fluid from a sealed container as a temporary replacement.
Using any non-Honda brake fluid can cause corrosion and decrease the longevity of the system. Have the brake system flushed and refilled with Honda Heavy Duty Brake Fluid DOT 3 as soon as possible.
If the brake fluid level is at or below the MIN mark, have a dealer inspect for leaks or worn brake pads as soon as possible.
Use the same fluid for both the brakes and clutch.
■ Checking the Brake Fluid
4-cylinder models
Brake Reservoir
The fluid level should be between the MIN and MAX marks on the side of the reservoir.
MAX
MIN
6-cylinder models
Brake Reservoir
MAX
MIN
TOC
Index
244
2013 TSX13 ACURA TSX 4D-31TL16400.book 245 ページ 2012年7月27日 金曜日 午前11時31分
QRG
■ Checking the Clutch Fluid
Clutch Reservoir
The fluid level should be between the MIN and MAX marks on the side of the reservoir.
uuMaintenance Under the HooduBrake/Clutch Fluid
1Checking the Clutch Fluid
If the clutch fluid level is at or below the MIN mark, have a dealer inspect for leaks or an excessively worn clutch plate as soon as possible.
MAX
MIN
TOC
Index
245
2013 TSX13 ACURA TSX 4D-31TL16400.book 246 ページ 2012年7月27日 金曜日 午前11時31分
uuMaintenance Under the HooduRefilling Window Washer Fluid
QRG
Refilling Window Washer Fluid Check the amount of window washer fluid using the washer fluid level gauge on the cap.
If the level is low, fill the washer reservoir.
1Refilling Window Washer Fluid
NOTICE Do not use engine antifreeze or a vinegar/water solution in the windshield washer reservoir. Antifreeze can damage your vehicle’s paint. A vinegar/water solution can damage the windshield washer pump.
Level Gauge
TOC
Index
246
2013 TSX13 ACURA TSX 4D-31TL16400.book 247 ページ 2012年7月27日 金曜日 午前11時31分
Replacing Light Bulbs
QRG
Headlight Bulbs When replacing, use the following bulbs. High beam headlight: 60 W (HB3) Low beam headlight: 55 W (H1 for halogen bulb Type)
35 W (D2S for high voltage discharge type)
■ High Beam Headlight
4-cylinder models
6-cylinder models 1. Remove all the engine compartment covers.
2 Engine Compartment Covers* P. 233
Passenger side All models 2. Remove the engine coolant reservoir.
Engine Coolant Reservoir
6-cylinder models
Engine Coolant Reservoir
TOC
Index
1Headlight Bulbs
NOTICE Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.
The headlight aim is set by the factory, and does not need to be adjusted. However, if you regularly carry heavy items in the trunk or tow a trailer, have the aiming readjusted at a dealer or by a qualified technician.
The HB3 and H1 types are halogen bulbs. When replacing a bulb, handle it by its base, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.
* Not available on all models
Continued
247
2013 TSX13 ACURA TSX 4D-31TL16400.book 248 ページ 2012年7月27日 金曜日 午前11時31分
uuReplacing Light BulbsuHeadlight Bulbs
QRG
4-cylinder models
Fastener
Cover
6-cylinder models
Air Intake Duct
Fastener
Driver side 4-cylinder models 3. Remove the fasteners, using a flat-tip
screwdriver. Remove the cover of the air intake duct and its upper part.
1Headlight Bulbs
The exterior lights’ inside lenses (headlights, brake lamps, etc.) may fog temporarily after a car wash or while driving in the rain. This does not impact the exterior light function. However, if you see a large amount of water or ice accumulated inside the lenses, have your vehicle inspected by a dealer.
6-cylinder models 3. Remove the fasteners, and remove the air
intake duct cover.
TOC
Cover
Index
248
2013 TSX13 ACURA TSX 4D-31TL16400.book 249 ページ 2012年7月27日 金曜日 午前11時31分
uuReplacing Light BulbsuHeadlight Bulbs
QRG
4-cylinder models Coupler
Bulb
Driver and passenger side All models 4. Remove the coupler.
u It can be removed by pushing the tab.
5. Rotate the old bulb to the left to remove.
6. Insert a new bulb into the headlight
assembly and turn it to the right.
7. Insert the coupler into the connector of
Bulb
the bulb.
Tab
6-cylinder models Coupler
TOC
Tab
Index
Continued
249
2013 TSX13 ACURA TSX 4D-31TL16400.book 250 ページ 2012年7月27日 金曜日 午前11時31分
uuReplacing Light BulbsuHeadlight Bulbs
High Voltage Discharge Types ■ Low Beam Headlights High voltage can remain in the circuit for a long period of time after the light is switched off. Do not attempt to inspect or replace the high voltage discharge type bulbs yourself. Ask a dealer to inspect and replace low beam headlights.
Halogen Types ■ Low Beam Headlights
Inner Fender
Screw
Clip