Login- Download PDF Manual
-
ACC has automatically cancelled because of bad weather or other conditions.
You will hear a beep about 1 second.
ACC needs to be checked.
Have your vehicle checked by a dealer.
332
2010 RL ０９／０４／０２ １９：２０：５５ ３１ＳＪＡ６５０ ０３３８
Switching to Cruise Control
DISTANCE BUTTON
Adaptive Cruise Control (ACC)
Press the distance button.
To switch from ACC to cruise control, press the distance button on the steering wheel, and hold it for 1
second.When you press the button, you will see CRUISE MODE SELECTED on the multi-information display for 2
seconds. To switch back to ACC, press and hold the distance button again for 1 second.When the cruise control is selected, ACC does not sound a beeper or display a message on the multi- information display. Make sure to keep a safe distance from the vehicle ahead of you.
Always be aware which mode is selected.
333
2010 RL ０９／０４／０２ １９：２１：０４ ３１ＳＪＡ６５０ ０３３９
HomeLink Universal Transceiver
The HomeLink Universal Transceiver built into your vehicle can be programmed to operate up to three remote controlled devices around your home, such as garage doors, lighting, or home security systems.
General Safety Information Before programming your HomeLink to operate a garage door opener, confirm that the opener has an external entrapment protection system, such as an ‘‘electronic eye,’’ or other safety and reverse stop features.
If your garage door was manufactured before April 1, 1982, you may not be able to program HomeLink to operate it. These units do not have safety features that cause the motor to stop and reverse it if an obstacle is detected during closing, increasing the risk of injury. Do not use HomeLink with any
334
garage door opener that lacks safety stop and reverse features.
Units manufactured between April 1, 1982 and January 1, 1993 may be equipped with safety stop and reverse features. If your unit does not have an external entrapment protection system, an easy test to confirm the function and performance of the safety stop and reverse feature is to lay a 2
under the closing door. The door should stop and reverse upon contacting the piece of wood. As an additional safety feature, garage door openers manufactured after January 1, 1993 are required to have external entrapment protection systems, such as an electronic eye, which detect an object obstructing the door.×
Important Safety Precautions Refer to the safety information that came with your garage door opener
to test that the safety features are functioning properly. If you do not have this information, contact the manufacturer of the equipment. Before programming HomeLink to a garage door or gate opener, make sure that people and objects are out of the way of the device to prevent potential injury or damage. When programming a garage door opener, park just outside the garage.
−
If you just
Training HomeLink Beforeyoubegin received your vehicle and have not trained any of the buttons in HomeLink before, you should erase any previously learned codes before training the first button. To do this, press and hold the two outside buttons on the HomeLink transceiver for about 10 20 seconds, − until the red indicator flashes. Release the buttons, then proceed to step 1.
2010 RL ０９／０４／０２ １９：２１：１７ ３１ＳＪＡ６５０ ０３４０
If you are training the second or third buttons, go directly to step 1.
HomeLink Universal Transceiver
CONTINUED 335
2010 RL ０９／０４／０２ １９：２１：２２ ３１ＳＪＡ６５０ ０３４１
HomeLink Universal Transceiver
HomeLink is a registered trademark of Johnson Controls, Inc.
AsrequiredbytheFCC: ThisdevicecomplieswithPart15ofthe FCCrules.Operationissubjecttothe followingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and (2)thisdevicemustacceptany interferencereceived,including interferencethatmaycauseundesired operation.
Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.
ThisdevicecomplieswithIndustry CanadaStandardRSS-210. Operationissubjecttothefollowingtwo conditions:(1)thisdevicemaynotcause interference,and(2)thisdevicemust acceptanyinterferencethatmaycause undesiredoperationofthedevice.
336
2010 RL ０９／０４／０２ １９：２１：３０ ３１ＳＪＡ６５０ ０３４２
RLTechnologyPackagemodels AcuraLink enhances your ownership experience by providing a direct communication link between your vehicle and the Acura Server. Working through the XM radio satellite, AcuraLink works in conjunction with the navigation system, (HFL), and audio system in your vehicle. It displays and receives several kinds of messages, including:
HandsFreeLink
Bluetooth
AcuraLink (U.S. models only)
Interface Dial Most AcuraLink functions are controlled by the interface dial. The interface dial has two parts, a knob and a selector.
KNOB
ENTER
The selector can be pushed left, right, up, down, and in. Use the selector to scroll through lists, to select menus, and to highlight menu items. When you make a selection, push the center of the selector (ENTER) to go to that selection.
Operating tips and information on your vehicle’s features.
Maintenance information to keep your vehicle in top condition.
Diagnostic information to provide information about any problems with your vehicle.
Important recall and safety information.
SELECTOR
The knob turns left and right. Use it to make selections or adjustments to a list or menu on the screen.
337
2010 RL ０９／０４／０２ １９：２１：４０ ３１ＳＪＡ６５０ ０３４３
AcuraLink (U.S. models only)
Reading Messages If you have new messages, an envelope icon appears in the top right corner of the navigation screen.
To view previously read messages:
A list of all messages will be shown. New messages will be at the top. Select the message you want to read by pressing ENTER.
A red exclamation will be marked on an envelope icon with an important message.
Press the INFO button. The information screen will be shown.
To open a message: Press ENTER on the interface selector, then select New Message from the navigation system map menu.
338
2010 RL ０９／０４／０２ １９：２１：４９ ３１ＳＪＡ６５０ ０３４４
AcuraLink (U.S. models only)
Unread messages have a closed envelope icon next to them. The icon disappears when it has already been read.
Message Options
Only Diagnostic appear on
NOTE: messages screen while driving. They indicate your vehicle has a problem that may need immediate attention (see page
341
).
Select ‘‘Messages’’, then select a message category. Select the message you want to read and press ENTER.
After purchasing your vehicle, messages may not appear immediately. Your dealer has to register the vehicle identification before you can receive messages. This can take several days to process.
When you open a message, you can read a summary of it, and then choose one of several options. If an option is not available for a message, that option will not be highlighted.
CONTINUED
339
2010 RL ０９／０４／０２ １９：２１：５６ ３１ＳＪＡ６５０ ０３４５
AcuraLink (U.S. models only)
Delete the current message.
−
Select this option to delete
−
Voice Select this option to hear a voice read the entire message. This gives you more information than the screen can display at one time. When you select the Voice option, it changes to a Stop Reading option. Select the option again to stop the voice.
−
Call Select this option to call a phone number embedded in the Call message. When you select Bluetooth dials the number for you.
, the HandsFreeLink (HFL)
Bluetooth
To make a call, your compatible phone must be paired to the vehicle’s HandsFreeLink system, powered on, and located within the vehicle (see page
360
).
340
Find Nearest Dealer option to find the nearest Acura dealer using the navigation system.
Select this
−
−
Select this
Call Your Dealer option to call the Acura dealer you purchased your vehicle from. AcuraLink also directs you to this dealer so you can schedule a maintenance appointment or receive information about a message. If your assigned servicing dealer changes, AcuraLink will reset to call that dealer.
−
Select this
Diagnostic Info option to get more information about the current diagnostic message. To use this option, your cellphone must be paired with the HFL. In addition, the paired phone must have a compatible data service and be set up with the AcuraLink system to make a data connection. Access the handsfreelink.com website to find out which data services are currently compatible with AcuraLink.
Message Preferences To set your AcuraLink preferences (the types of messages you want to receive, if any), visit the My Acura website at www.owners.acura.com choose what you would like to receive. If you do not have internet access, call Acura Client Services at (800) 382-2238; they can set your message preferences for you.
, and
2010 RL ０９／０４／０２ １９：２２：０７ ３１ＳＪＡ６５０ ０３４６
Deleting Messages NOTE: campaign messages can only be deleted by your dealer.
Diagnostic info and recall/
To delete a single message:
Press the INFO button to bring up the Information screen.
Scroll to the Messages option, then select it by pressing ENTER on the interface selector.
Select the message category that contains the message you want to delete.
Use the interface knob to scroll up or down to the message title you want to delete, and select it by pressing ENTER on the interface selector.
Scroll to Delete with the interface knob, and select it by pressing ENTER on the interface selector.
AcuraLink (U.S. models only)
To delete all messages:
The Delete All Messages
NOTE: command does not apply to Diagnostic Info and Recall messages. They can only be deleted by your dealer.
Press the SETUP button to view the setup screen.
Select Other by pushing the interface selector to the right.
Use the interface knob to scroll to the AcuraLink/Messages option, and select it by pressing ENTER on the interface selector.
Scroll to the Delete Messages option, and select it by pressing ENTER on the interface selector.
Scroll to the category with the messages you want to delete, and select the category by pressing ENTER on the interface selector.
341
2010 RL ０９／０４／０２ １９：２２：１４ ３１ＳＪＡ６５０ ０３４７
AcuraLink (U.S. models only)
Quick Tips
Feature Guide
These messages, based on updated vehicle information and comments from other RL owners, supplement your Owner’s Manual. They provide you with relevant information for a safe and enjoyable ownership experience. For additional information, call Acura Client Services directly through the HFL.
During the first 90 days of ownership, a number of messages appears each day. These messages help you to use and understand the features of your vehicle.
Message Categories There are six message categories in AcuraLink: Quick Tips, Feature Guide, Maintenance Minder, Recalls/Campaigns, Diagnostic Info, and Scheduled Dealer Appointment. The system can store up to 255
messages.Message categories can be added, revised, or deleted through broadcast messages from Acura.
342
2010 RL ０９／０４／０２ １９：２２：２４ ３１ＳＪＡ６５０ ０３４８
You can use the following message options:
Make an appointment from the schedule at the dealer.
Reschedule the appointment with the dealer.
Call your dealer for an appointment.
Find the nearest dealer.
Maintenance Minder
These messages provide detailed information about the service needed for your vehicle. When a maintenance message appears on the multi-information display, a list of needed maintenance items is provided through an AcuraLink message. These messages tell you the exact maintenance needed, helping you to avoid unnecessary maintenance costs.
AcuraLink (U.S. models only)
AutomatedAppointment You can make an appointment with your dealer through the AcuraLink when you receive a maintenance minder message.
To use the automated appointment function, you should visit the My Acura website at , register some www.owners.acura.com required settings, and complete the Phone-Data Connection set-up (see page compatible phone should also be paired and linked to your vehicle’s Bluetooth
HFL (see page
Bluetooth
). Your
354
352
).
CONTINUED
343
2010 RL ０９／０４／０２ １９：２２：３０ ３１ＳＪＡ６５０ ０３４９
AcuraLink (U.S. models only)
When you see the maintenance minder message on the multi- information display, you will also receive a message in the navigation screen. To open the message, press ENTER. Select ‘‘New Messages,’’ then press ENTER. You will see the list of all messages. The most recent message is listed at the top.
Select the received message, then press ENTER. You will see the message as shown. To make an appointment, select ‘‘Schedule Dealer Appt.’’ then press ENTER.
The system will automatically connect to the Acura server, then show you an appropriate appointment date and time on the navigation screen. If you accept this appointment, select ‘‘Confirm Appointment,’’ then press ENTER.
344
2010 RL ０９／０４／０２ １９：２２：４０ ３１ＳＪＡ６５０ ０３５０
AcuraLink (U.S. models only)
Scheduled Dealer Appointment Torescheduletheappointment:
The confirmation message will be displayed on the screen. Make sure to confirm the appointment date, time and dealer. If it is OK, press ENTER.
If you want to change or reschedule the appointment date, select ‘‘Cancel,’’ then press ENTER.
Press the INFO button to go to the information screen. Select ‘‘Messages,’’ then select ‘‘Scheduled Dealer Appointment’’ from the message category list. Then press ENTER.
You will see the screen to reschedule as shown. To make an appointment, select ‘‘Reschedule Appointment,’’ then press ENTER. The system will automatically connect to the Acura server, then show you a new appointment date and time on the navigation screen. If you accept this appointment, select ‘‘Confirm Appointment,’’ then press ENTER.
CONTINUED
345
2010 RL ０９／０４／０２ １９：２２：４７ ３１ＳＪＡ６５０ ０３５１
AcuraLink (U.S. models only)
Tocanceltheappointment:
Select ‘‘Messages’’ on the information screen, then press ENTER. Select ‘‘Scheduled Dealer Appointment’’ from the message category list. Then press ENTER. To cancel the appointment, select ‘‘Cancel Appointment,’’ then press ENTER.
The system will request you to confirm the cancel on the navigation screen. To cancel the appointment, select ‘‘YES,’’ then press ENTER. If you select ‘‘NO,’’ the screen goes back to the previous message display.
The system will automatically connect to the Acura server, then show you the confirmation on the navigation screen. If you accept the cancel, press ENTER.
346
2010 RL ０９／０４／０２ １９：２２：５４ ３１ＳＪＡ６５０ ０３５２
If you select the cancel appointment, you cannot try to reschedule the appointment. If you want to change or reschedule the appointment date, call your dealer directly with HFL.
AcuraLink (U.S. models only)
Recall/Campaigns
Using automated appointment, your registered dealer through My Acura is automatically selected. If you want to select another dealer, such as in case of an emergency, find the nearest dealer and call the dealer directly with HFL.
When a maintenance appointment is due soon, you will also receive an appointment reminder message.
If your vehicle is affected by a recall or other important safety information, a letter will be mailed to you about the issue and how to fix it. If you don’t get your vehicle fixed, you will also receive a reminder message through AcuraLink. You can then use the message options to call your dealer for an appointment or to find the nearest dealer.
CONTINUED
347
2010 RL ０９／０４／０２ １９：２３：０１ ３１ＳＪＡ６５０ ０３５３
AcuraLink (U.S. models only)
For this reason, it is important that we retain your current phone number. Please update your information using My Acura at www.owners.acura.com.
Diagnostic Info When an indicator comes on or a message is displayed on the Multi- Information Display (MID), AcuraLink can provide information about the cause of the indicator or message and the recommended action to address it. This helps you handle the problem as it occurs, preventing or limiting costly repairs.
The AcuraLink system cannot determine some mechanical problems (such as squeaks or rattles) that are not triggered by the diagnostic indicator monitors.
For more information on the instrument panel indicators, see page .61
348
When any indicator comes on or a message is displayed on the MID, AcuraLink immediately notifies you with the message, ‘‘An indicator is on. AcuraLink can help you decide what to do.’’
If you do not want the information right away, select the Check Later option.
2010 RL ０９／０４／０２ １９：２３：１０ ３１ＳＪＡ６５０ ０３５４
If you want the information now, select the Check Now option. (If the navigation screen is not active, you must select OK from the navigation disclaimer screen before you can check the information.)
Depending on the severity of the problem, the message will let you know if you should see your dealer immediately or if you can wait until a later date.
You can then use the message options to call your dealer for an appointment or to find the nearest dealer.
AcuraLink (U.S. models only)
Reminder Message
When viewing a diagnostic info message through the INFO menu, you can use the Diagnostic Info option to connect to the Acura server and retrieve the latest information regarding the problem.
There may not be any
NOTE: additional information, depending on the time elapsed since the previous time you retrieved the information from the Acura server.
When you make an appointment through My Acura’s online Schedule Service Appointment, you can be reminded in advance about that appointment through AcuraLink.
If you need to reschedule or cancel the appointment, see page
345
CONTINUED
349
2010 RL ０９／０４／０２ １９：２３：１５ ３１ＳＪＡ６５０ ０３５５
AcuraLink (U.S. models only)
AcuraLink/Message Screen
Turning the Automated Appointment preference off will disable appointment notifications in the vehicle based on appointments created or changed at My Acura’s online scheduling website.
Appointments can still be created, rescheduled, and canceled from the vehicle; however the appointment information stored in the vehicle will not be updated. Any changes to those appointments should be made from the My Acura website.
350
2010 RL ０９／０４／０２ １９：２３：２０ ３１ＳＪＡ６５０ ０３５６
AcuraLink (U.S. models only)
To access the following functions, press the SETUP option, push the interface selector to the right to select Other, then rotate the interface knob to select AcuraLink/ Messages.
−
Select this
Delete Messages option to delete all stored messages within a category, except for diagnostic info and recall campaign messages. These messages can only be deleted by a certified technician after the recall is done or the problem is corrected, or through a broadcast message from Acura.
−
New Message Notification Select ON if you want to be notified of new messages (envelope icon appears on the navigation screen). Select OFF if you do not want to be notified of new messages (envelope icon does not appear on the screen). Messages can still be accessed using the INFO menu. If you would like to stop receiving messages, visit the My Acura website at www.owners. acura.com preferences.
to change your messaging
CONTINUED
351
2010 RL ０９／０４／０２ １９：２３：２６ ３１ＳＪＡ６５０ ０３５７
AcuraLink (U.S. models only)
−
Select
Phone-Data Connection this option to begin the process required to connect to Acura. This is used to access the most recent diagnostic information when a problem occurs.
−
Auto Reading Select ON to have the system automatically read each message to you. Select OFF to manually select the Voice option when you want a message read to you.
352
Bluetooth
For the Phone Data
NOTE: Connection button to be active, you compatible and need a enabled cell phone paired to the Bluetooth To complete the data connection setup, the paired phone must have a compatible data service.
HandsFreeLink (HFL).
2010 RL ０９／０４／０２ １９：２３：３１ ３１ＳＪＡ６５０ ０３５８
compatible and enabled
To find more information on Bluetooth cell phones, visit www.acura.com/handsfreelink the HandsFreeLink consumer support at 1-888-528-7876. In Canada, visit ACURA.
, or call 1-866-78-
www.acura.ca
or call
AcuraLink (U.S. models only)
−
Connect to the Acura Server The default setting is prompt. When a diagnostic info message appears, and you select the Check Now option, the system will prompt you before connecting to the Acura server. If you do not wish to connect at that time, select No at the prompt, and you will see the information from the onboard database. The ‘‘Auto’’ setting will remove the prompt when you select the Check Now option and will automatically connect to the Acura server. This setting only applies when you have a Bluetooth enabled phone that is paired with HFL and you have completed the Phone-Data Connection setup.
AsrequiredbytheFCC: ThisdevicecomplieswithPart15ofthe FCCrules.Operationissubjecttothe followingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and (2)thisdevicemustacceptany interferencereceived,including interferencethatmaycauseundesired operation.
Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.
353
2010 RL ０９／０４／０２ １９：２３：４０ ３１ＳＪＡ６５０ ０３５９
Bluetooth HandsFreeLink
HandsFreeLink (HFL)
Bluetooth allows you to place and receive phone calls using voice commands, without handling your cell phone.
To use HFL, you need a Bluetooth- compatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities:
Using HFL HFLButtons
HFL TALK BUTTON
HFL BACK BUTTON
In the U.S., visit handsfreelink
www.acura.com/
, or call (888) 528-7876.
In Canada, visit (866) 78-ACURA.
www.acura.ca
, or call
NAVI VOICE CONTROL BUTTONS
HFL Talk button release to give a command or answer a call.
Press and
−
−
HFL Back button release to end a call, go back to the previous command, or cancel the command.
Press and
354
VoiceControlTips
MICROPHONE (on the ceiling)
Air or wind noise from the dashboard and side vents and windows may interfere with the microphone. Adjust or close them as necessary.
2010 RL ０９／０４／０２ １９：２３：４７ ３１ＳＪＡ６５０ ０３６０
Press and release the HFL Talk button each time you want to make a command. After the beep, speak in a clear, natural tone.
Try to reduce all background noise. If the microphone picks up voices other than yours, commands may be misinterpreted.
Many commands can be spoken together. For example, you can say ‘‘Call 123-456-7890’’ or ‘‘Dial Peter.’’
When HFL is in use, navigation voice commands cannot be recognized.
To change the volume level of HFL, use the audio system volume knob or the steering wheel volume controls.
Bluetooth HandsFreeLink
HelpFeatures
To hear general HFL information, including help on pairing a phone or setting up the system, say ‘‘Tutorial.’’
For help at any time, including a list of available commands, say ‘‘Hands free help.’’
CONTINUED
355
2010 RL ０９／０４／０２ １９：２３：５４ ３１ＳＪＡ６５０ ０３６１
Bluetooth HandsFreeLink
InformationDisplay As an incoming call notification, you will see the following display:
SIGNAL STRENGTH
HFL MODE
BATTERY LEVEL STATUS
With the HFL system activated, you will also see ‘‘HF LINK’’ on the upper display.
ROAM STATUS
PHONE DIALING
Some phones may send battery, signal strength, and roaming status information to HFL.
A notification that there is an incoming call, or HFL is in use, will appear on the navigation screen when the audio system is on.
356
2010 RL ０９／０４／０２ １９：２４：０２ ３１ＳＪＡ６５０ ０３６２
Bluetooth HandsFreeLink
How to Use HFL
The ignition switch must be in the ACCESSORY (I) or ON (II) position.
‘‘Pair’’
‘‘Edit’’
Pair a phone to the system (See page 360)
Edit the name of a paired phone (See page 361)
‘‘Phone Setup’’
‘‘Delete’’
Delete a paired phone from the system (See page 361)
Press HFL Talk button
‘‘List’’
‘‘Status’’
‘‘Next Phone’’
Hear a list of all phones paired to the system (See page 361) Hear which paired phone is currently linked to the system (See page 361) Search for another previously paired phone to link to (See page 361)
‘‘Set Pairing Code’’
Set the pairing code to a ‘‘Fixed’’ or ‘‘Random’’ number (See page 362)
‘‘Call’’ or ‘‘Dial’’
‘‘123-555-
＃＃＃＃
’’
Enter desired phone number (See page 362)
‘‘Jim Smith’’
Once a phonebook entry is stored, you can say a name here. (See page 363)
Press and release the HFL Talk button each time you give a command.
CONTINUED 357
2010 RL ０９／０４／０２ １９：２４：０７ ３１ＳＪＡ６５０ ０３６３
Bluetooth HandsFreeLink
‘‘Redial’’
‘‘Transfer’’
‘‘Mute’’
‘‘Send’’
Redial the last number called (See page 363)
Transfer a call from HFL to your phone, or from your phone to HFL (See page 365)
Mute your voice to the person at the other end of the call (See page 365)
Send numbers or names during a call (See page 365)
Press HFL Talk button
‘‘Store’’
‘‘Edit’’
Store a phonebook entry (See page 365)
Edit the number of an existing phonebook entry (See page 366)
‘‘Phonebook’’
‘‘Delete’’
Delete a phonebook entry (See page 366)
‘‘Receive Contact’’
‘‘List’’
If your phone supports this function, use this to transfer contacts from your phone to HFL (See page 367)
Hear a list of all stored phonebook entries (See page 367)
Press and release the HFL Talk button each time you give a command.
358
2010 RL ０９／０４／０２ １９：２４：１４ ３１ＳＪＡ６５０ ０３６４
Bluetooth HandsFreeLink
‘‘System Set up’’
Press HFL Talk button
‘‘Security’’
Apply a security passcode to the system that must be input at each key cycle to access the system (See page 372)
‘‘Change Passcode’’
Change your security passcode (See page 372)
‘‘Call Notification’’
‘‘Auto Transfer’’
Set how you would like to be notified of an incoming call (See page 372)
Set calls to automatically transfer from your phone to HFL when you enter the vehicle (See page 373)
‘‘Clear’’
Clear the system of all paired phones, phonebook entries and security passcode (See page 373)
‘‘Change Language’’
Change language from English to French (See page 374) ＊
‘‘Tutorial’’
Hear a tutorial for general rules on using the system (See page 355)
‘‘Hands Free Help’’
Hear a list of available commands and additional information describing each command (See page 355)
Press and release the HFL Talk button each time you give a command. : Canadian models
＊
CONTINUED 359
2010 RL ０９／０４／０２ １９：２４：２４ ３１ＳＪＡ６５０ ０３６５
Bluetooth HandsFreeLink
To use HFL, you need to pair your Bluetooth-compatible cell phone to the system.
Phone Setup This command group is available for paired cell phones.
Phonepairingtips
You cannot pair your phone while the vehicle is moving.
Your phone must be in discovery or search mode to pair. Refer to your phone’s manual.
Up to six phones can be paired.
Your phone’s battery may drain faster when it is paired to HFL.
If after three minutes your phone is not ready to pair or a phone is not found, the system will time out and return to idle.
360
Topairacellphone: 1.
Press and release the HFL Talk button. If you are pairing a phone for the first time, HFL will give you information about the pairing process. If it is not the first phone you are pairing, say ‘‘ setup Pair
Phone .’’
’’ and say ‘‘
2.
Follow the HFL prompts and put your phone in discovery or search mode. HFL will give you a 4-digit pairing code and begin searching for your phone.
3.
When your phone finds a Bluetooth device, select HFL from the options and enter the 4-digit code from the previous step.
4.
Follow the HFL prompts and name the newly paired phone.
2010 RL ０９／０４／０２ １９：２４：４２ ３１ＳＪＡ６５０ ０３６６
Torenameapairedphone: Press and release the HFL Talk button before a command.
1.
Say ‘‘
Phone setup
.’’
2.
Say ‘‘
Edit
’’ after the prompts.
3.
If there is more than one phone paired to the system, HFL will ask you which phone’s name you want to change. Follow the HFL prompts and rename the phone.
Todeleteapairedphone: Press and release the HFL Talk button before a command.
1.
Say ‘‘
Phone setup
.’’
2.
3.
Say ‘‘
Delete
’’ after the prompts.
HFL will ask you which phone you want to delete. Follow the HFL prompts to continue with the deletion.
Bluetooth HandsFreeLink
Tohearthenamesofallpaired phones: Press and release the HFL Talk button before a command.
Tochangefromthecurrentlylinked phonetoanotherpairedphone: Press and release the HFL Talk button before a command.
1.
Say ‘‘
Phone setup
.’’
1.
Say ‘‘
Phone setup
.’’
2.
Say ‘‘
List
’’ after the prompts.
3.
HFL will read out all the paired phone’s names.
Tohearwhichpairedphoneis currentlylinked: Press and release the HFL Talk button before a command.
1.
Say ‘‘
Phone setup
.’’
2.
Say ‘‘
Status
’’ after the prompts.
3.
HFL will tell you which phone is linked to the system.
2.
3.
4.
Next phone
’’ after the
Say ‘‘ prompts.
HFL disconnects the linked phone and searches for another paired phone.
Once another phone is found, it is linked to the system. HFL will inform you which phone is now linked.
If no other phones are found or paired, HFL will inform you that the original phone is linked again.
361
2010 RL ０９／０４／０２ １９：２４：５３ ３１ＳＪＡ６５０ ０３６７
Bluetooth HandsFreeLink
Tochangethepairingcodesetting: Press and release the HFL Talk button before a command.
1.
2.
3.
Say ‘‘
Phone setup
.’’
Set pairing code
’’ after the
Say ‘‘ prompts.
If you want HFL to create a random code each time you pair a phone, say ‘‘ .’’ If you want to choose your own 4-digit code to be used each time, say ‘‘ and follow the HFL prompts.
Random
Fixed ’’
Making a Call You can make calls using any phone number or a name in the HFL phonebook. You can also redial the last number called.
HFL uses a Class 2 Bluetooth, which means, the maximum range between your phone and vehicle is 30 feet (10
meters).During a call, HFL allows you to talk up to 30 minutes after you remove the key from the ignition switch. However, this may weaken the vehicle’s battery.
Tomakeacallusingaphone number: Press and release the HFL Talk button before a command.
1.
2.
3.
Say ‘‘
Call
’’ or ‘‘
Dial
.’’
Follow the HFL prompts and say the phone number you want to dial.
Follow the HFL prompts to confirm the number and say Call ‘‘
’’ or ‘‘
Dial
.’’
Once connected, you will hear the person you called through the audio speakers.
362
2010 RL ０９／０４／０２ １９：２５：０４ ３１ＳＪＡ６５０ ０３６８
Tomakeacallusinganameinthe HFLphonebook: Press and release the HFL Talk button before a command.
Tomakeacallfromanimported phonebook:
1.
Say ‘‘
Call
’’ or ‘‘
Dial
.’’
2.
3.
Follow the HFL prompts and say the name stored in the HFL phonebook that you want to call.
Follow the HFL prompts to confirm the name and make the call.
Toredialthelastnumbercalledby HFL: Press and release the HFL Talk button and say ‘‘
Redial
.’’
Bluetooth HandsFreeLink
1.
Press the INFO button, then select Cellular Phonebook ‘‘
.’’
3.
Select a phonebook you want to choose a phone number from.
2.
Select ‘‘ Phonebook
.’’
Search Imported
If the phonebook you select is PIN- protected, you will need to enter the PIN to access it. See page more information.
368
for
CONTINUED
363
2010 RL ０９／０４／０２ １９：２５：１４ ３１ＳＪＡ６５０ ０３６９
Bluetooth HandsFreeLink
List option
To search for a specific name in the phonebook, enter the keyword for either the first or last name.
To display all names in the List phonebook, select the ‘‘
’’ option.
364
4.
5.
Select the name. All the phone numbers stored for that name will be listed. Select the phone number, and HFL begins dialing.
Store in
If you choose ‘‘ HandsFreeLink number will be stored in HFL, so that you can call it using HFL’s name tag by voice.
,’’ the phone
Receiving a Call When you receive a call, an incoming call notification (if activated) will play and interrupt the audio system if it is on.
Press the HFL Talk button to answer the call, or the HFL Back button to hang up.
CallWaiting If your phone has Call Waiting, press and release the HFL Talk button to put the original call on hold and answer the incoming call.
To return to the original call, press the HFL Talk button again. If you don’t want to answer the incoming call, disregard it and continue with your original call. If you want to hang up the original call and answer the new call, press the HFL Back button.
2010 RL ０９／０４／０２ １９：２５：３０ ３１ＳＪＡ６５０ ０３７０
Transferring a Call You can transfer a call from HFL to your phone, or from your phone to HFL.
Press and release the HFL Talk button and say ‘‘
Transfer
.’’
Muting a Call You can mute your voice to the person you are talking to during a call.
To mute your voice during a call, press and release the HFL Talk button and say ‘‘
Mute
.’’
To unmute your voice, press and release the HFL Talk button and say Mute ‘‘
’’ again.
Send Numbers or Names During a Call HFL allows you to send numbers or names during a call. This is useful when you call a menu-driven phone system.
Tosendanameornumberduringa call: Press and release the HFL Talk button before a command.
1.
2.
Say ‘‘
Send
.’’
Follow the HFL prompts and say the name or number you want to send.
3.
Follow the HFL prompts to send the tones and continue the call.
To send a pound (
NOTE: ‘‘pound.’’ To send a star (*), say ‘‘star.’’
), say
＃
Bluetooth HandsFreeLink
Phonebook You can store up to 50 names with their associated numbers in HFL. The numbers you store cannot only be phone numbers but other types, such as account numbers or passwords, which can be sent during a menu-driven call.
Tostoreaphonebookentry: Press and release the HFL Talk button before a command.
1.
Say ‘‘
Phonebook
.’’
2.
Say ‘‘
Store
’’ after the prompts.
3.
Say a name you want to list as your phonebook entry.
4.
Say the number you want to store for the name entry.
5.
Follow the HFL prompts and say Enter ‘‘
’’ to store the entry.
CONTINUED
365
2010 RL ０９／０４／０２ １９：２５：４２ ３１ＳＪＡ６５０ ０３７１
Bluetooth HandsFreeLink
NOTE:
Avoid using duplicate name entries.
Toeditthenumberstoredinaname: Todeleteaname: Press and release the HFL Talk button before a command.
Press and release the HFL Talk button before a command.
1.
Say ‘‘
Phonebook
.’’
1.
Say ‘‘
Phonebook
.’’
2.
Say ‘‘
Edit
’’ after the prompts.
3.
Follow the HFL prompts and say the name entry you want to edit.
4.
When asked, say the new number for that name.
2.
3.
5.
Follow the HFL prompts to complete the edit.
Say ‘‘
Delete
’’ after the prompts.
Say the name you want to delete and follow the HFL prompts to complete the deletion.
Avoid using ‘‘home’’ as a name entry.
It is easier for HFL to recognize a multisyllabic or longer name. For example, use ‘‘Peter’’ instead of ‘‘Pete,’’ or ‘‘John Smith’’ instead of ‘‘John.’’
366
2010 RL ０９／０４／０２ １９：２５：５６ ３１ＳＪＡ６５０ ０３７２
Tolistallnamesinthephonebook: Press and release the HFL Talk button before a command.
1.
Say ‘‘
Phonebook
.’’
2.
Say ‘‘
List
’’ after the prompts.
3.
HFL begins reading the names in the order they were stored.
4.
If you hear a name you want to call, immediately press the HFL Talk button and say ‘‘
Call
.’’
Tostoreaspecificphonenumber fromyourcellphonedirectlytothe HFLphonebook(availableonsome phones): Press and release the HFL Talk button before a command.
1.
Say ‘‘
Phonebook
.’’
2.
3.
4.
Receive contact
Say ‘‘ prompts.
’’ after the
Follow the HFL prompts, select a number from your cell phone, and send it to HFL.
Follow the HFL prompts and name the number, or say Discard ‘‘ you want to store.
’’ if it is not the number
5.
Follow the HFL prompts if you want to store another number.
Bluetooth HandsFreeLink
Cellular Phonebook (availableonsomephones)
Cellular Phonebook If you select from the Information screen menu, you will see four HFL options.
For a list of cell phones that are compatible with this feature:
In the U.S., visit handsfreelink
www.acura.com/
, or call (888) 528-7876.
In Canada, visit (866) 78-ACURA.
www.acura.ca
, or call
CONTINUED
367
2010 RL ０９／０４／０２ １９：２６：０６ ３１ＳＪＡ６５０ ０３７３
Bluetooth HandsFreeLink
ImportCellularPhonebook: The entire phonebook data of the cell phone that is linked to HFL can be imported to the navigation system.
SearchImportedPhonebook: Once a phonebook has been imported, you can search the phone numbers by the person’s name.
PIN ICON
IMPORTED PHONEBOOK
IMPORTED DATE
If the phonebook is PIN-protected, you will need to enter the 4-digit PIN.
Search Cellular
Select ‘‘ Phonebook phonebooks will be displayed.
,’’ and a list of imported
Select a phonebook from the list.
Import Cellular
Select ‘‘ Phonebook ,’’ and HFL will begin importing the phonebook. Select OK ‘‘
’’ after the import is completed.
368
2010 RL ０９／０４／０２ １９：２６：１９ ３１ＳＪＡ６５０ ０３７４
Bluetooth HandsFreeLink
List option
Select a person from the list. Up to three category icons are displayed in the left side of the list:
DeleteImportedPhonebook: You can delete any imported phonebook.
To search for a specific name in the phonebook, enter the keyword for either the first or last name.
To display all names in the List phonebook, select the ‘‘
’’ option.
Fax
Car
Voice
Other
Preference
Home
Mobile
Work
Pager
These category icons indicate how many numbers are stored for the name. If a name has more than three category icons, ‘‘…’’ is displayed.
Select the person’s number you want to call, and press the HFL Talk button.
Delete Imported
Select ‘‘ Phonebook phonebooks will be displayed.
,’’ and a list of imported
Select a phonebook you want to delete. If the phonebook is PIN- protected, you will need to enter the 4-digit PIN number.
CONTINUED
369
2010 RL ０９／０４／０２ １９：２６：２８ ３１ＳＪＡ６５０ ０３７５
Bluetooth HandsFreeLink
After making a selection, the following screen will appear.
PIN Number You can add, change, or remove a PIN number from any phonebook.
TochangethePINtoanewnumber:
Yes Select ‘‘ the deletion.
,’’ then ‘‘
OK
’’ to complete
ToaddaPIN: If you have selected a phonebook without a PIN, you will see the above display.
Enter the new 4-digit PIN. You will have to re-enter the PIN for confirmation.
Select the phonebook you want. The display will change as shown above.
Enter the current PIN for this phonebook.
370
2010 RL ０９／０４／０２ １９：２６：３５ ３１ＳＪＡ６５０ ０３７６
PIN number
ToremoveaPIN: Select ‘‘ Do not use PIN ‘‘ the current PIN.
,’’ then select ’’ after you enter
The display will change as shown above.
Enter the new 4-digit PIN number. You will be asked to re-enter the PIN for verification.
Bluetooth HandsFreeLink
System Setup This command group allows you to change or customize HFL basic settings.
CONTINUED
371
2010 RL ０９／０４／０２ １９：２６：４８ ３１ＳＪＡ６５０ ０３７７
Tochangeyoursecuritypasscode: Press and release the HFL Talk button before a command.
1.
2.
Say ‘‘
System setup
.’’
Change passcode
’’ after the
Say ‘‘ prompts.
3.
