#1
17th January 2003 - 09:29 PM
Post |
|
---|---|
I have given up trying to fix this prob on my car so I'm looking for someone who really knows their shit with SR20 motors..... Any suggestion guys...... |
ThunderBolt
Post #4
I've heard Charlie's Motors at Wooloongabba are pretty good, never been there myself yet though. |
---|
§ileightĄ
Post #8
I put a post up about the prob I was having a while ago, basically the car would run fine, then at no particualr time it would loose power and was a slug to drive until it got past about 3500rpm....I was certain it was the knock sensor (because the wire had been spliced and a dodgie scotch lock was used to connect it back together). I soldered them properly and was still having the problem, I managed to get in there and check the plug itself and it was filthy and greasy and obviuosly wasn't giving a good signal to the ECU, gove it a quick clean and haven't had the prob since. I want to remove the sensor and clean it well and where it connects to the block, because it uses the block as a ground (stupid idea :roll: ). |
---|
If you have a BoostCruising account enter your user name and password into the yellow box.
Alternatively, you can quickly login with Facebook.
If you don't have an account create one below.
Create AccountLogin using your Facebook account!