gslrallysport
Post #71
QFM A1RM Fitted to JZX100 Turbo! QUOTE Went for a drive in Daves chaser the other day, he has the A1RM pads and wow can feel the difference after being a passenger in mine compared to being a passenger in his. I'll be ordering a set of the HPX ones soon when i get some slotted rotors! http://www.jzx100.com/forum/index.php?s=&a...ost&p=66585 |
---|
gslrallysport
Post #72
QFM A1RM Fitted to Nissan 300ZX Twin Turbo! QUOTE I've also just fitted A1RM's to my car, although not in daily use, good feel from cold - fantastic in the twisties.... much better than the Bendix Ultimates i had on there before.... http://www.aus300zx.com/forum/showpost.php...p;postcount=143 |
---|
gslrallysport
Post #73
QFM A1RM Fitted to Mazda BA Astina! QUOTE Well it was the first round of the NSW Supersprint Championship last Sunday out at Oran Park. The A1RM's performed brilliantly and are an ideal pad for supersprinting. Because of the minimal time we get to cycle before trying to punch out a superlap, the A1RM's are ready for the first corner cold or hot. There also was no fade or pedal pressure change that I had been suffering with previous pads. The best thing about the A1RM's is the braking confidence they give you. Thanks heaps for supplying these great pads! No link available, sent via PM! |
---|
gslrallysport
Post #74
QFM A1RM used on the track in a 350RWKW GTST! QUOTE I'm running QFM's A1RM's front and rear in my car paired up with slotted RDA rotors. On the street I find them very good, not much noise unless a flogging is order of the day. On the track I thought they were fantastic. They bite well, feel very nice and consistent. They didn't fade on me once. For what I do, street and track work they are ideal. And for the price I think are probably the best value/performance items I have bought! http://www.skylinesaustralia.com/forums/in...t&p=5071489 |
---|
gslrallysport
Post #75
Become a fan of QFM Performance Pads on Facebook, post your feedback and experiences, and keep up to date with special offers and new products! Click the above logo, or CLICK HERE! |
---|
gslrallysport
Post #77
How much would I be looking at for front and rears for a MY03 Subaru Liberty B4? Hi mate, Which pads were you after, HPX (high performance street), or A1RM (street/track)? Also has your car got the 2 pot front brakes: http://www.bendix.com.au/user_uploaded_fil...ages/DB1342.gif or the 4 pot front brakes: http://www.bendix.com.au/user_uploaded_fil...Inner_Outer.gif Also just double check too that rears are DB1379: http://www.bendix.com.au/User_Uploaded_Fil...ages/DB1379.gif Regards, Greg |
---|
gslrallysport
Post #79
Hi, do you have any HPX in DB1845 fronts and DB1675 rears? FPV F6X Territory with 6 pot brembo fronts. Thanks. Hi mate, The front isn't a pad that QFM do, but we can get it custom made if you've got time on your side. 4-6 weeks for manufacture, and $119 for the set. The rears we have on the shelf, $79 for the set. The pad which we do keep on the shelf to suit the front (and which is an ideal combo with HPX rears) is a European performance pad called TRW Remsa. Good for 650 degrees (or 100 degrees better than Bendix Ultimate), and what comes OEM on alot of high performance European cars. $135 for the set, and in stock. Shipping is free if you order front and rear together, so for Remsa front and HPX rear would be $214 delivered, or else HPX front and rear would be $198, and the 4-6 weeks. Any other questions just let me know! Regards, Greg |
---|
gslrallysport
Post #80
Feedback from a 300ZX at Winton on A1RM Street/Track Pads! QUOTE I hit the A1RM pads HARD at Winton. ( i also replaced the fluid with Penrite SIN synthetic) These pads are really good. I had zero brake fade on the stock calipers. I actually wasnt expecting much. They remained tight and still usable even after the hardest laps. Cant recommend them enough. I need a set of stock A1RM rears for the race car now. http://www.aus300zx.com/forum/showpost.php...amp;postcount=9 |
---|
gslrallysport
Post #81
QFM HPX Fitted to VZ SV6! QUOTE Got the pads put on today....freaking awesome man. I'll be highly recommending these to anyone who asks. The cold bite and the amount of speed it wipes off is just awesome! http://forums.justcommodores.com.au/927602-post29.html |
---|
gslrallysport
Post #82
Another Happy QFM HPX Customer! QUOTE Will happily vouch for the HPX's... been running them and find they grab well, dont make noise or dust, and they are made here in Australia for a great price. You'd be hard pressed to find a reason not to try them http://www.cruisingbrisbane.com/forum/topi...ost__p__1167276 |
---|
gslrallysport
Post #83
QFM A1RM Fitted to Nissan 300ZX! QUOTE Put A1RM's in last week, and after a suitable wearing in process...I am really impressed with them, both cold and warm...haven't got them hot hot yet...but so farm very impressed with how they pull up and peddle feel. To be honest they feel better than many higher priced pads I've used in the past. And definite improvement on the Ultimates I was using. Highly recommend them to any zedder out there in the market for a new set of pads for the stocko calipers. http://www.aus300zx.com/forum/showpost.php...p;postcount=154 |
---|
civic racer
Post #84
Hi there |
---|
gslrallysport
Post #85
Hi there I'm after front pads for 08 Toyota Aurion. can i have price for pickup or delivery if availabe (4105) on HPX & A1RM. Thanks Ashley. Hi Ashley, Front HPX $79 (on the shelf) Rear HPX $79 (on the shelf) Front A1RM $119 (on the shelf) Rear A1RM $119 (on back order, but HPX rears would be fine with A1RM front) If you don't do any track work just stick to the HPX. Unfortunately as we're a wholesaler retail pickup isn't available, but if you order two or more sets of pads together (ie front and rear) then delivery on a courier, or on one of our delivery runs is free. Otherwise delivery on just 1 set of pads is $8. Regards, Greg |
---|
gslrallysport
Post #87
Hi mate, |
---|
gslrallysport
Post #90
hey mate you have hpx pads for 2004 Corolla Sportivo ZZE123R. cheers Hi mate, Yep, got QFM HPX on the shelf to suit Sportivo. Front pads are $119, rear pads are $79. Regards, Greg |
---|
gslrallysport
Post #91
QFM HPX Fitted to 03 WRX! QUOTE Parts arrived and all installed. Used the A1RM's on my car (TT Supra) and HPX on my mate's WRX. The ones on the WRX stop SOOOOOOO much better even for the lower grade pads! Awesome pads and service all round. Thanks http://www.supraforums.com.au/forum/showpo...mp;postcount=13 |
---|
gslrallysport
Post #92
QFM A1RM - Why pay more!!! QUOTE Installed a set of A1RM's front and rear just before Z Fest. By far the best value brake pads I've ever used, no pedal fade from high speed and hardly any dust which is what I expected from a high performance pad. I liken the performance of these to an EBC Red Stuff but at a fraction of the price! http://www.aus300zx.com/forum/showpost.php...p;postcount=157 |
---|
gslrallysport
Post #93
QFM A1RM again outperforming expectations on the track! QUOTE GSL, The pads arrived and were fitted up just in time for a recent club track day at Wakefield Park. To be honest, I was absolutely amazed at their performance. They work well from cold and have so far not made any noise. When warmed up (one or two corners at the most), their bite was unbelievable (on my MX5). It felt like I had the car standing on its nose braking into Turns 2 and 10 at Wakefield! Their performance allowed me to brake much later than I have previously and I actually had to mentally refrain from hitting the brakes early. And the best thing, they make minimal dust! Regards, Tony No link available, sent via email. |
---|
SubMission
Post #95
bought 2 sets off you last week, both for subaru brembo setup's, and boy are they alot better than the pads that the previous owner had on them. |
---|
gslrallysport
Post #96
QFM A1RM Fitted to JZA80 Supra! QUOTE Got the A1RM fitted on the car with the brake fluid you guys sell. Even though I'm still bedding in the brake pads, I have to say you can feel the difference in the braking power these have. I had Bendix Ultimates prior to the A1RMs and they are a world of difference! http://www.supraforums.com.au/forum/showpo...mp;postcount=27 |
---|
gslrallysport
Post #97
QFM HPX fitted to Mitsubishi Legnum VR4! QUOTE Awesome pads, No dust no noise. Worked far better then my previous set of Bendix Pads. Recommend to anyone whether you drive an import or not! https://www.boostcruising.com/forums/index....mp;p=1285952698 |
---|
gslrallysport
Post #98
QFM A1RM fitted to JZA80 Supra! QUOTE UPDATE: Took these out at Sandown... no brake fade what so ever! the pads / fluid held out really well, and was still pulling up the car after a whole day of hard braking both in the wet and dry! Totally impressed by these pads and I highly recommend them! http://www.supraforums.com.au/forum/showpo...mp;postcount=27 |
---|
gslrallysport
Post #99
QFM Pads Fitted to BA Falcon! QUOTE Hi, I own and drive a BA Futura 4.0L auto sedan. I was so impressed with the performance of your QFM pads on my BA Falcon I though I would drop you a email. Ok firstly I spoke to someone there questioning on what pads and what improvement I could expect and was told QFM pads and around 10% or so, ok that was sure a understatement. I had the QFM pads and new DBA slotted rotors fitted and I got to say I was very surprised the 10% improvement was wrong try 40 to 50%. I have found that now braking is effortless less peddle pressure is required and the actually braking action is a major improvement, when I say peddle pressure I mean before on the standard BA pad and rotors you had to apply a reasonable heavy pressure to apply the brakes where now its almost just a toe pressure to apply the same braking effort. Stopping from 100K’s the difference is easily 3 to 4 car lengths and as before less peddle pressure. One of the keys here as well as the stopping improvement is the requirement to use less peddle pressure this is something that the older drivers would appreciate not to mention make for safer driving. I feel fitting the QFM pads and DBA rotors has made my vehicle much safer to drive and given me more security in the braking department. K.Chapman North QLD No link available, sent via email! |
---|
gslrallysport
Post #101
Hi Greg, How much for a set of HP-X Front and Rear for Toyota Corolla 2005 Accent Sport ZZE122? How much for a set of A1RM Front and Rear for Rx7 1989 Fc3s Turbo? I live in Brisbane, can I pick them up? If not, How much postage to Q4113? Cheers Ken Hi Ken, HPX to suit the Corolla is $79 per axle set front or rear. A1RM to suit the RX7 is $119 per axle set front or rear. All in stock, but with the Corolla, need to know which of the 3 front brakes you've got (can be any of them): DB1422 - http://www.bendix.com.au/misc/Pad-pics/1422-Inner.gif DB1431 - http://www.bendix.com.au/misc/Pad-pics/1431.gif DB1714 - http://www.bendix.com.au/misc/Pad-pics/1714-Outer.gif As we're a wholesaler retail pickup isn't available, but delivery on 2 or more sets of pads is free on Couriers Please anyway. So all up for the front and rear HPX and front and rear A1RM you're looking at $396 delivered. Easiest way to order is credit card over the phone, 1300 884 836, or else swing me your details, full name, delivery address (preferably a work or business address!!), contact number and email and I can fire you through an invoice with direct deposit details. Regards, Greg |
---|
jamesjgts25t
Post #102
Can you get me a price for QFM HPX to suit 2000 HSV VX Clubsport R8. |
---|
gslrallysport
Post #103
Can you get me a price for QFM HPX to suit 2000 HSV VX Clubsport R8. How much for front and rear delivered. Please PM me. Thankyou ps. bought QFM pads from you for 2 other cars and was very pleased with them. Hi mate, Front and rear HPX pads to suit your R8 would be $178 delivered. Both front and rear in stock. Regards, Greg |
---|
gslrallysport
Post #104
QFM HPX Fitted to S13! QUOTE If there were any doubters, I have the HPX pads on my S13 (with an R33 GTS-T hub/brake conversion) and oh my God it pulls up very fast on RDA slotteds. they can take a fair bit of abuse but if you were ever going to track the car you'd go for A1RMs. For the money, hard to fault! http://www.fordlaser.com/viewtopic.php?t=50469&start=126 |
---|
jamesjgts25t
Post #105
Paid for pads Friday afternoon and received on Monday morning. Awesome quick easy sale and VERY quick delivery. |
---|
If you have a BoostCruising account enter your user name and password into the yellow box.
Alternatively, you can quickly login with Facebook.
If you don't have an account create one below.
Create AccountLogin using your Facebook account!