What Old School Parts Have You Got Sitting In The Shed - or collectables  

Page 1 of 2
Jump to page
eh-buddy
  • eh-buddy
  • Budding User
  • Member No.: 118,232
  • Joined: 18-May 08
  • Posts: 517
Post #1 post 1st February 2009 - 08:06 AM
so guys an gals what old school bits you got laying around

ie tripple carbs, petrol bowsers even old pedal cars
the_random_hero
Post #2

350 Chev, couple of old Statesmans, RA60 Celica, heaps of doors/boots/panels for all the aforementioned cars, etc.

DeadSled
Post #3

Heaps of stuff for FB/EK, a spare HJ grill, some stromberg single barrel carbs, X2 manifold, Finned rocker cover for a red motor, Triple SU w/ manifold, some trim bits from an FE/FC.. Bumper and overriders for a '53 Buick..

Used to have a finned twin manifold for a grey motor, as well as a finned rocker cover for a grey but swapped that for my X2 and finned cover for a red.

Also got heaps of 1940 Chev parts under my bench..

eh-buddy
Post #4

ive gott hz tonner hz wagon 3 cyclops pedal cars but im after some lj torry supension bits and banjo diff centres (coarse spline) if anyones got any just sitting there let me know 3.9 would be good

lostheadcase
Post #5

245 engine, 302 engine, various bits of shit off the various cars that have gone through the shed.

olcruiser64leh
Post #6

QUOTE(the_random_hero @ Feb 1 2009, 11:02 AM) [snapback]1283508354[/snapback]

350 Chev, couple of old Statesmans, RA60 Celica, heaps of doors/boots/panels for all the aforementioned cars, etc.


Hmmm.... 350, Statesman...yeah that'll work!! thumbsup.gif

Holden_Guy
Post #7

Hey i have various Gemini parts just sitting in the shed , dad has a crap load of old autos and rims reallyjust a bit of everything laying around, any one coul have a field day just searching round in there lol.

ban01t
Post #8

VG Pacer replica, Pontiac 400 motor, Heaps of Trans am bits, too many Rally II/GTS rims, NOS plate kit, Gear drives, Holleys.........heaps of stuff

DeadSled
Post #9

You got any plans for that Pontiac 400?

clutch-monkey
Post #10

a coup-le of rust free mini shells, parts to buil two complete mini's...a pair of turbo's, one to suit mini motor, several carby setups for said mini's...

summoner
Post #11

brand new tail light lenses for Lh Torana
NOS front left 1/4 guard for an LH Torana
complete fibre glass SL/R bodykit for LH Torana
Holley 425cfm(i think) street performer carbie.
Original AM Radio from my HQ GTS

TuffVC
Post #12

Fair bit of Valiant stuff....mines apart for a resto
Random HR parts but Im always looking for more
Heaps of tyres and rims from the "burnout dayz"
Chrome skulls,musical airhorns and shit...you know...the usual
A fairly big home stereo
A crapload of tools

DeadSled
Post #13

Any of you Mopar boys got a 4spd borg warner lying around? I need one for my Chev..

PIG208
Post #14

Have some HR spares (complete rsteering rebuild kit) Headlight surrounds, horn Bar.

Original HK sedan speedo head & HK grill

TuffVC
Post #15

QUOTE(PIG208 @ Feb 2 2009, 05:18 PM) [snapback]1283515906[/snapback]

Have some HR spares (complete rsteering rebuild kit) Headlight surrounds, horn Bar.

Original HK sedan speedo head & HK grill


Im looking for 2 widened 13 inch steelies and the coffee pot from the steering column off HR/HD ...mines completely missing!!!

racerphill
Post #16

Anyone got, or know someone who has, a disc brake front end for a HR?

My mate just bought a HR to do up and wants to update the front brakes.

phill

DeadSled
Post #17

Hey Phil,

Just use the drum front end, and swap the drums for Kingswood discs like we've done wink.gif Unless he wants HR rotors and all that.. then.. keep lookin aha. We sold a set not long ago too tongue.gif

racerphill
Post #18

That sounds like the go!

...what's involved with the swap to Kingswood discs?
Which model discs do you use, and do they just bolt on, or do they need some machining?

Phill

tas_ae71
Post #19

i have some pioneer speaker boxes for a parcel shelf biggrin.gif

DeadSled
Post #20

Phil,

We used HZ on my EK, not sure on my Brothers HR though.. probably around HJ - HZ. We just took the HR discs out at the ball joints, and put the Kingswood ones back in. Although make a note of which one is left and right on the Kingswood, because they have to be reversed on the HR / EK.

Other than that.. he'll need to get either a Kingswood diff and have it shortened, or get the axle holes welded and redrilled to suit Kingswood stud pattern.

Thats all we know so far.. haven't gotten to the rear ends yet. My Brothers HR is using a Gemini Booster as well.. and Dad had to make up a big mount because it didn't fit on the firewall next to the bonnet hinges and clutch cylinder.. so if your mate already has the VH40 booster.. use that and if it needs rebuilding get it rebuilt.. Dads regretting selling our one originally because it needed a $300 odd dollar rebuild.

eh-buddy
Post #21

phil ive got a couple off sets of hz disks and stubs if you want to try em to see if they fit if your in brisbane pm me and ill help you fit them thumbsup.gif

TuffVC
Post #22

Discs are definitely the way....My HR has Torana brakes on the front...done before I got it and Im glad for no drums to be honest...having said that,I had 4 wheel drums on my Val and they worked pretty well,considering.....Ive gone late pattern stubs on that now and 4 pot Landcruiser calipers,to stop the supercharged slant(once its back on the road)
You will still be able to use the later discs with no booster if need be but will be WAY better with one obviously...I ran non boosted discs on my HQ for a while and the only downside was a larger calf muscle on my left leg biggrin.gif

racerphill
Post #23

Thanks for all the help guys.
PM sent EH-buddy.

phill

Rolla_ball
Post #24

set of genuine mitsubishi mudflaps for an 82 sigma still in the unopened packet.

helrzr925
Post #25

worked 253, nib holley 750cm (from the late 80's tongue.gif ), 2 used 351's, 2 used gearbox's from late 50's ranchwagon's, straight 6 block form a 1937 chevy, and many more old and pretty rare spares laugh.gif

clutch-monkey
Post #26

apparently among my crate of carbies i have a twin 1 1/4 set up laugh.gif

ban01t
Post #27

Will be rebuilding the 400 and taking the 455 out, it will be for sale in the future ;-)

jwebb2876
Post #28

3 1 3/4in SUs + manifold to suit Morris Isis, '84 GK Sigma GSR short motor, 4G63T SOHC short motor, incomplete single barrel downdraft Stromberg carby + manifold off a 173, cast log-style exhaust manifold for a 173, XF carby, a whole lot of RT104/118 Corona parts, plastic bodied Carter four barrel carby, a windscreen sun shield off an XF Fairmont, MOST of a XE wagon, damaged rear louvre off a GE Scorpion, various old Mitubishi parts, the list of old and sometimes useless shit goes on tongue.gif

NVS_084
Post #29

3 Fb's,2 Fc's about 10 Lh/lx Torana's Including a straight original SLR5000 a few Ek's,EJ's,Eh's Almost every H series holden ever built lol about 20 Commodores ranging from Vc to Vp And tonnes of random cars that we have PAID $25 for or got for free.. None of its mine though its all my old man's all the commodores are going to scrap once the price of scrap per tonne goes back up but i dont think hes selling none of the older stuff anytime soon.. All up we have about 150 cars in the back paddock I have no idea about random parts, theres just so much shit i cant list it all coz id be here all day. I got a set of Convo pro's with a car the other day for a carton of piss i was cheering. If anyone is chasing any parts just give us a pm and i can tell you our location.

Chris
Post #30

Almost mint HZ Premier front end
Couple of straight WB panels

Nothing special

s2_12a
Post #31

A few holley carby's , webbers , complete xa gt's (one coupe , one sedan ) biggrin.gif , 2 gt steering wheels, 12 slotters , fuel pumps , tailights , xa guards , spare 351 , 12a rotary , series 2 rx7 shell all my old mans besides the rotary stuff laugh.gif

the_random_hero
Post #32

Update: An entire TA22 sad.gif

eh-buddy
Post #33

QUOTE(the_random_hero @ Feb 12 2009, 06:43 PM) [snapback]1283569715[/snapback]

Update: An entire TA22 sad.gif



whats wrong with the silly car hsdance.gif

the_random_hero
Post #34

QUOTE(eh-buddy @ Feb 12 2009, 07:14 PM) [snapback]1283569942[/snapback]

whats wrong with the silly car hsdance.gif


Selling it to move to Japan. Coming back and I'll either buy another one, or possibly a MR2 as a track-only car.

jwebb2876
Post #35

just scored a MS80 Crown Super Saloon for a carton of piss so add that to the list

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Login with Facebook

    Login using your Facebook account!

Page 1 of 2
Jump to page
THIS TOPIC HAS BEEN ARCHIVED
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
Loading...
x