Natturboq's Nissan - N16 Pulsar  

Page 1 of 2
Jump to page
Natturboq
  • Natturboq
  • Site Newbie
  • Member No.: 53,683
  • Joined: 4-October 06
  • Posts: 15
Post #1 post 6th October 2006 - 04:34 PM
[b]Engine: 2lt SR20

[b]Exhaust: Three inch mandrel bend TIG welded stainless steel with highflow cat and a 4.5 inch tip

[b]Suspension: lowered,heavy duty King Springs and Koni Shocks.

[b]Wheels:17 inch Advanti Mamba rims.

[b] Mods: Imported Front cut. SR20 and N14 5 speed box -
Garrett roller bearing T4 custom rebuilt and Modified Turbo
K&N Air filter
Clutch Extreme -
Haltech ECU and Module - E6X
Custom stainless steel Manifold jet coated
Custom Front Mount Intercooler
Left hand side Drive Shaft custom made -
Battery oddersy -
Turbo smart External Waste gate - modified piping to suit.
Venolia Forge Pistons -
Custom strut bar
Custom painted rocker cover
Custom painted /made intercooling piping
Custom made aluminum covers.
Custom Oil catch can
500hp fuel pump (same as VL)
Braided lines
GReddy oil and radiator caps
HKS SSQ blow-off valve

Brakes
Twin Piston 330mm disk on the front
Single Piston 300mm disk on the rear
Pulsar Braided lines
Colour coded Calipers



[b]Stereo Audio / Visual:Pioneer 2 way 6.5 inch 250w front speakers
Pioneer tweeters
Pioneer 2 way 16cm rear speakers
X2 Pioneer 300w amps
X2 Pioneer 12 inch 600w subs
Custom built boot.


[b]Estimated Power: TBA not ran correcly on Dyno yet..
Natturboq's Nissan
Natturboq's Nissan
Natturboq's Nissan
Natturboq's Nissan

Comments

  • Boost Network 45
  • carlwitt
    Post #2

    Nice car, awersome photos!

    Twist
    Post #3

    Ah I remember seeing this in Fast Fours a few years ago

    Creds to you

    TZINU
    Post #4

    niiice car

    luk3y4
    Post #5

    great work! best pulsar i've seen in a while!n dancingcool.gif

    obrim
    Post #6

    Wow thats really nice man!

    2DZIRE
    Post #7

    nice how much KW

    Natturboq
    Post #8

    Cheers Guys ,

    Yeah I had the Pulsar in FF's mag back in 2003 , but done a S**T load of work since then.. That was the standard 1.8...

    I'm in the process of putting in the SR20 back in , as I spun the big end in it and took it out for a rebuild..

    Still learning about the SR20's not sure how much power it will pull. Hoping for at least 240HP ATW...

    I have only hust joined up so happy to hear your comments / tips..

    Cheers

    Natalie :-)

    Ahmad
    Post #9

    looks awesome man, think i seen u on pulsar.org.au

    Mr_LoLux_man
    Post #10

    nice car..... best iv seen of this model

    TUF.WRX
    Post #11

    QUOTE(Natturboq @ Oct 7 2006, 11:05 AM) [snapback]1280332793[/snapback]

    Cheers Guys ,

    Yeah I had the Pulsar in FF's mag back in 2003 , but done a S**T load of work since then.. That was the standard 1.8...



    i think i still have that issue, great looking pulsar, keep us posted smile.gif

    Natturboq
    Post #12

    QUOTE(Ahmad @ Oct 7 2006, 11:07 AM) [snapback]1280332794[/snapback]

    looks awesome man, think i seen u on pulsar.org.au



    Yeah your right..

    Had to get out and see some other models around and a dude from there informed me of this site..

    my B/friend and I own a EVO 9.... I love my turbocharged cars..

    TR customs
    Post #13

    looks nice as gl wit it

    Low-Vy
    Post #14

    Yeah i remember this, looks excellent...great work..anymore plans????

    Natturboq
    Post #15

    QUOTE(Low-Vy @ Oct 7 2006, 11:40 AM) [snapback]1280332879[/snapback]

    Yeah i remember this, looks excellent...great work..anymore plans????


    For the EVO no plans.. Want to keep warranty and its a weapon standard no need to go crazy.. Just put a nice sound system and HKS SSQ thats all...

    For the Pulsar still a bit to go before its back on the road. will see what happens with that later.. Will post up a dyno reading once done..

    Claymotion
    Post #16

    fast fours vip.....................blink.gif
    Um its okay but it isn't vip.

    Nice ride with nice mods tho.

    BernZ..corollin
    Post #17

    hot puslar mate.. nice work tongue.gif

    Twist
    Post #18

    QUOTE(Claymotion @ Oct 7 2006, 12:25 PM) [snapback]1280332983[/snapback]
    fast fours vip.....................blink.gif
    Um its okay but it isn't vip.
    Nice ride with nice mods tho.

    Thats the website dickhead fastfoursvip.com.au

    Shall be quite quick once done, look foward to it thumbsup.gif

    alen_aki
    Post #19

    doestn look all that good, an i think u r an idiot for spending all that money on the engine when u could hav just bought a decent done up turbo car for the same money this pos will cost u

    Twist
    Post #20

    And you own ?

    Natturboq
    Post #21

    Yeah ok , thats cool. I can cop some bad comments too.. tongue.gif

    Understanding it seems a waste of money to spend on a Pulsar and most all a Front wheel drive.. However I wanted to do something different and wanted to keep the Pulsar, so I did what I did.. I think I will make some good power out of it and at the end of the day I'm happy... biggrin.gif

    80SNA
    Post #22

    Its a hot car and all but how are you going to get it mod plated etc..

    Im under the impression your not aloud to use older engines in newer cars?

    moe002
    Post #23

    hell yeah dude biggrin.gif

    that is sweet as biggrin.gif

    Natturboq
    Post #24

    I have had the SR20 in for a while, just been off the road. Before it went off I was driving it and have already got a engineering certificate and RTA approved.. It was no probs at all..

    there is no way I would have done it if I could drive it on the road..

    piv
    Post #25

    Looks tidy mate, you need to do soemthing to the front though. Lose the bonnet protector and debadge bonnet... and maybe some mesh somewhere. It just reminds me of a stock pulsar parked out the front of a church or something (even with the front mount), needs something to stand out.

    Natturboq
    Post #26

    laugh.gif Yeah, these model Pulsars are common for the tile "Granny's Car".... Have been thinking about changing the grille and maybe somekind of small scoope or something on the bonnet.. I don't know yet..

    llama_au
    Post #27

    Nah, leave it Nat. It's much sleeker the way it is smile.gif

    TwinCam16
    Post #28

    As for the whole older engine debate, what year is the last S15? what engine did it have wink.gif

    twmba-bloke
    Post #29

    awesome pulsar .... very nice work .... love the car and good luck with the power figure thumbsup.gif

    llama_au
    Post #30

    QUOTE(TwinCam16 @ Oct 7 2006, 06:55 PM) [snapback]1280333784[/snapback]

    As for the whole older engine debate, what year is the last S15? what engine did it have wink.gif


    2002, and there is still one variant of the SR20 produced - the SR20VET.

    e$kimo_beer_monkey_91
    Post #31

    yea i remember this in fast fours a couple years back.......very nice

    27AME
    Post #32

    lovin' it, dunno how anyone can diss any part of it. Front mount + stock looking N16 = sex.

    HOON69
    Post #33

    nice pics,looks like its got a tidy setup wink.gif

    trid_man
    Post #34

    sweet man, if you didnt have those plates i dont think you would ever get pulled over by a cop!

    And nah no bonnet scoop man, maybe change the grill, but leave that bonnet protector, granny spec! woo hoo. tongue.gif

    MTB.GTR
    Post #35

    very nice!

    • Member Login

      If you have a BoostCruising account enter your user name and password into the yellow box.

      Alternatively, you can quickly login with Facebook.

      If you don't have an account create one below.

      Create Account
    • Login with Facebook

      Login using your Facebook account!

    Page 1 of 2
    Jump to page
16 User(s) are reading this topic (16 Guests and 0 Anonymous Users)
0 Members:
Loading...
x