Login
|
Post #1
 9th August 2006 - 09:43 PM
|
|---|---|
|
Yeh as topic says, in around 2 hours i went from full clutch to no clutch. Master cylinder was nearly empty, if not totally empty! So i filled it up and still nothing. Do i have to like bleed it or something? What could be wrong guys, leak or something? I only work on old auto's so i have nfi idea here.. Thanks in advance Jeremy. -------------------- 67 SS Nova Coupe. Iron AES 398 LS1. T56. Boost. TCI Pro Touring F&R Clip. Streetfighter Project. 1000rwhp or bust. 90 Chevy Silverado C1500 SWB. 350tbi on gas. Dropped. Daily Driver. Cuttin up original metal, cause it's fun |
|
 |
NGHII
Post #2
hey man that shit happened to me, does the clutch feel real soft and no pressure pulling back, if so there is a tiny nut where the clutch fluid is undo that and put clutch fluid in and tell some1 in the car to hold the clutch when u take it out and then keep doin it, if it keeps leaking try tightening the clutch cable underneath your car. |
|---|
 |
Cookie
Post #3
yeah sounds like your slave cyl on your box is leaking, just have a look , if its leaked the whole tank of fluid you will see a shit load of fluid around where ever its leaking, (on the side of gearbox) lol .. refilling it wont help it, it'l just leak out again soon enough.. new ones are for those things about $20 , not that hard to fit up wither, maybe ask a few mates to help out if you cant.. |
|---|
-
Member Login
If you have a BoostCruising account enter your user name and password into the yellow box.
Alternatively, you can quickly login with Facebook.
If you don't have an account create one below.
Create Account -
Login using your Facebook account!