Would Anyone Pay Money For This?  

Page 5 of 6
Jump to page
Would Anyone Pay Money For This?
You cannot see the results of the poll until you have voted. Please login and cast your vote to see the results of this poll.
Total Votes: 379
Guests cannot vote 
Manic 180
Post #141

QUOTE(Co8ra @ Aug 19 2006, 07:03 AM) [snapback]1280166807[/snapback]

I think its pretty funny that FEEEKy wasnt part of many forums til he decided to throw some guys name acroosss the internet, for a story that no-one understands.

I wouldnt pay for that job

But i know who the trimmer was, and many of you who haved bagged it out have also drooled over his previous works many times

"it must be true, it was on the internet!"



he has been on this forum for over a year....

so what if ive drooled over his other work, look at this one, if the customer couldnt afford the job, the trimmer should have said no instead of doing a dodgy, the trim job looks like a nasty home job a novis could do, there is no excuse for this at all.

evaded
Post #142

He only started posting in this thread though.

Yes this isn't work I would pay for but considering the person is getting a $9k-$10k for $5.5k one would think that the jobs that are paying full price would be at the top of the priority list. Thus it would take a tad longer.

Perhaps there is a bit more to the story than what is being told?

prophecy
Post #143

QUOTE(the red krawler @ Aug 20 2006, 01:17 AM) [snapback]1280168616[/snapback]

Bringing up the price quoted is kind of irrelevant here.

Look at the state of the car... Its not even roadworthy anymore!

It reminds me of us getting our skyline repsrayed by "a certain company who shall remain nameless but gets their name plugged every 3 seconds on the internet". We went there and asked for a price to repsray the car in white with a slight pearl through it. We were given a price. When the job was finished, the car was complete shit. Massive paint runs, orange peel, etc. Obviously we whinged, and after several visits finally got it to an acceptable standard although with much bad grace and comments that really shirted me off. One was "This is what you get for a cheap repsray" (we never asked for a CHEAP repsray!) and another "Cars leave factory like this" (if a car ever left any factory like that, the quality control guys would get their arses kicked)....

I can imagine something similiar happened here. Can you really imagine the guy went into "that company" and said "Look I dont care how arse my car looks, I want to give you 5k to fuck up my car with poor quality workmanship and dodgy materials"....??

The standard of that work isnt even first year apprentice work. How can anyone running a legitimate business even pretend that work is acceptable? I dont care how cheap a job was, I would *NEVER* pass off such shitty workmanship.

Oh and I dunno about "lots of cars" from that company that we've drooled over.... I took a tour around their incredibly professional web page (lawl, lawl, oh lawl!) and saw all of 1 car thats been done, and I would hardly get over excited by the standard of that either...



Hogs breath, right?

QUOTE(evaded @ Aug 22 2006, 10:44 AM) [snapback]1280174774[/snapback]

He only started posting in this thread though.

Yes this isn't work I would pay for but considering the person is getting a $9k-$10k for $5.5k one would think that the jobs that are paying full price would be at the top of the priority list. Thus it would take a tad longer.

Perhaps there is a bit more to the story than what is being told?



I'd sure love to hear an excuses that justifies the gaps, poor stitching and poor quality of the job, if the job was CHEAP it should have involved possibly cheaper materials or less of the car done (seats only, no dash, whatever) not done dodgy, i doubt the trimmer saved money by doing it like that..

Perhaps you're a little too opinionated for your own good.

Oh and all the retards getting upset over people SARCASTICALLY saying "wow thats a great job". Relax for christs sake, you're going off your nuts over something so petty, anger management hey.

evaded
Post #144

Or perhaps people jump to conclusions before knowing everything.

Where did I say there was an excuse for the poor work? I suggested there is perhaps more to it.

Perhaps it was dropped down the list and the job was rushed at the end. It is a huge drop from what has been done in the past.

So instead of arcing up like a little brat just accept that their may be another side to the story.

Perhaps there isn't, perhaps this is the whole truth.

However you make yourself look like a pratif there is more to the story.

Just so you don't arc up again that last line wasn't directed at you it was at everyone.

prophecy
Post #145

QUOTE(evaded @ Aug 22 2006, 01:29 PM) [snapback]1280175375[/snapback]

Or perhaps people jump to conclusions before knowing everything.

Where did I say there was an excuse for the poor work? I suggested there is perhaps more to it.

Perhaps it was dropped down the list and the job was rushed at the end. It is a huge drop from what has been done in the past.

So instead of arcing up like a little brat just accept that their may be another side to the story.

Perhaps there isn't, perhaps this is the whole truth.

However you make yourself look like a pratif there is more to the story.

Just so you don't arc up again that last line wasn't directed at you it was at everyone.



Stop acting like there's something excusable about the quality of work.

zilla
Post #146

Maybe he was drunk?

Nollsy
Post #147

absolutely F**KN shit mate. man thats terrible. SUE THEM!!!

FFEEkY
Post #148

There is no excuse for work like this. if it was a cheap job, then it should have been done with cheap material, or not doing as much to the car. This is just bad workmanship, and poor quality control.

There were other quotes obtained for this job also, ranging from 5-7k - this was the middle of the range quoted, not the cheapest.

evaded
Post #149

QUOTE(prophecy @ Aug 22 2006, 05:37 PM) [snapback]1280176592[/snapback]

Stop acting like there's something excusable about the quality of work.


I'm not excusing the quality of work. It should never have left the shop like that.

As I was saying there just may be more to the story. I don't know but things are almost never that black and white.

Manic 180
Post #150

QUOTE(evaded @ Aug 23 2006, 08:35 AM) [snapback]1280178255[/snapback]

I'm not excusing the quality of work. It should never have left the shop like that.

As I was saying there just may be more to the story. I don't know but things are almost never that black and white.



if you know the story post it up.

is still cant see any excuse why a job like this should leave the shop. (apart from the owner asking the shop to fuck the car up)

evaded
Post #151

I don't know the full story but I have seen past work from this person and it just seems very odd.

Thus why I said there maybe more to the story.

Manic 180
Post #152

the only excuse is that didnt come out of my shop.
how can you even attempt to justify this?

^sims^
Post #153

I think he just means that he doesnt understand how the trimmer can go from trimming decent jobs to shit like that..

and he is right.. there are always 2 sides to a story.. it seems like there is no excuse for it to be like that.. but who knows?

Manic 180
Post #154

i completly dissagree.

the owners of the buisness must be headfucked.
even if the job was out of spite or for waht ever reason, if they thought they wouldnt be any reprocusions of thier actions they have serious problems.

who cares what the other part of the story is,
the main point is they fucked someone over bad, and in the process fucked the name of a seemingly respected buisness

Kevin
Post #155

why wont they take it all apart and re-do it again properly?

LanCeRPeM69
Post #156

Ive had a retrim done by the company most of the bits were good but alot of it was rushed and u can see, mate of mines car was up there at the same time as this commodore, which inturn we removed form his shed.

Hes a good bloke, just doesnt have good time management skills, he only just recently moved into the new shed he is in now, so im guessing that he was still setting up alot of stuff, the place was a hole when i went there but yeah.

What concerns me the most is that he hid away from her and tried to do the job that day, a 3 week job in 3 hours and thats the results.

Hes been good to me and the rest of the people that i no have gone to him, but quality oversets kindness

BIG`O
Post #157

QUOTE(LanCeRPeM69 @ Aug 24 2006, 08:54 AM) [snapback]1280181801[/snapback]

Ive had a retrim done by the company most of the bits were good but alot of it was rushed and u can see, mate of mines car was up there at the same time as this commodore, which inturn we removed form his shed.

Hes a good bloke, just doesnt have good time management skills, he only just recently moved into the new shed he is in now, so im guessing that he was still setting up alot of stuff, the place was a hole when i went there but yeah.

What concerns me the most is that he hid away from her and tried to do the job that day, a 3 week job in 3 hours and thats the results.

Hes been good to me and the rest of the people that i no have gone to him, but quality oversets kindness


well said pemma.

top bloke. seems to have gone to shit.

and that looks to be paint from a nearby panel works settled on it...

fkn10
Post #158

**Comment not needed**

Thanks

Grant

73ESN
Post #159

QUOTE(FFEEkY @ Aug 11 2006, 08:50 AM) [snapback]1280143229[/snapback]

If you are unsure of who did this, please dont spread rhumors,

Find out for yourself, not on the grapevine.



Again...I've heard a rumour that this was Cartunez....now that hurts. Cartunez has only done TWO full interiors and both customers were happy with the results. If you want to check out a Cartunez interior have a look at Brett's 53XUS IS200 when you see it. We would never let a car out of the shop looking like that commodore. If you want to know who did the interior PM me of FFEEkY. I hope no other reputable shops have been accused of such shitty work. rant2.gif

big929
Post #160

i agree with andrew, there is no way brad would ever let that leave his shop.

the red krawler
Post #161

Thats why I reckon it sucks that you cant name the shops involved. All that NOT naming them does is spread rumours about who it COULD have been, and other legitimate businesses get burnt in the process.

Fuck slander laws. People who do this kind of crap deserved to be named and shamed ( © today tonight / ACA) to prevent other people getting stung in the same way.

Please PM FFEEky for the name smile.gif


VS Style
Post #162

why doesnt ffeeKY go to today tonight?

COR33
Post #163

seriously what people actually said yes....
thats a pretty bad job mate hope u get it all workd out.

Croma
Post #164

QUOTE(VS Style @ Aug 26 2006, 01:07 PM) [snapback]1280188817[/snapback]

why doesnt ffeeKY go to today tonight?



Because today tonight dont support Modified cars, whether its the interior or not...

Sicarius123
Post #165

Shit that is terrible!

What else is done to the car modification wise? Is it even worth having it re-done somewhere else months later?

Personally I think you'd be better off making them pay you a value that will get you a Calais or SS.

Oh and DO NOT pay them a cent for that work, it wont be worth the shitfight trying to get it back.

Dan.

LA53R
Post #166

LOL at idiots saying you get what you pay for and its a cheap job, do you realise even if the interior was suppose to be a cheap job you don't go and rack up 800km on the car, fuck the steering, the motor and thats not all dust you see it was left parked uncovered next to another car getting a respray, its covered in overspray and not only that the body has developed dents...

I know the owner, oh and she is a female not a he as i read in some posts! this is terrible, a lot of money went into that car before this cocksucker got to it and destroyed it sad.gif

The company involved will burn in hell, i can't name anyone on here but PM me or FFEEKy for the name.
I can't beleive how they can do this, one google of the company name and i find forums praising his work its just sad he chose Laurens car to fuck up sad.gif

RIP!

DreamensioN
Post #167

Can someone PM me the name of the company? I PMed Freeky last week but I haven't had a reply yet.

Krawler? VS Style? Anybody? PM pls biggrin.gif

Post #168

burn theyre shop down biggrin.gif

Post #169

QUOTE(HOON69 @ Aug 5 2006, 08:48 AM) [snapback]1280125113[/snapback]

don't pay,get a solicitor get a highly recommended detailer and make a new visit and show them the work as well,then file a law suit for damages and report them to MTA for making your ride unroadworthy with the window not being able to wind down properly.

fair trading go the full hog i'd be trying to get your ride outta that place asap and recoupe the damages.

800klms must of become a weekend driver for him ay sad.gif

def don't pay though.


if she was to take it to the MTA, they would look the car over and any defects caused by the upholster, she will get fined for and her car taken off the road. similar happened to my mum when she bought her BMW privatly, the old owners took it to theyre mechanic for a RWC and the company passed it off as road worthy, we took it to motorline at daisy hill and they found about 20 things wrong with it and some which where defective. we called up MTA and they said if they check it over and find things wrong with it, they will give us the fines, defect the car and take it off the road. then we have to file a law suit against the company that originally did the RWC and in the end after all the solicitors and shit it wouldnt of been worth it.

FFEEkY
Post #170

QUOTE(DreamensioN @ Aug 30 2006, 09:14 AM) [snapback]1280198757[/snapback]

Can someone PM me the name of the company? I PMed Freeky last week but I haven't had a reply yet.

Krawler? VS Style? Anybody? PM pls biggrin.gif



Sorry mate, i been very busy this week smile.gif don't feel special tongue.gif lol

ill reply to all now

***Edit***
all 37 replied to - geez you guys are nosey! thumbsup.gif

bstlvr
Post #171

man thats rough

litterhawk
Post #172

interior looks great m8 gl with it

iamhappy46
Post #173

QUOTE(obnxsh @ Aug 30 2006, 12:01 PM) [snapback]1280199416[/snapback]

if she was to take it to the MTA, they would look the car over and any defects caused by the upholster, she will get fined for and her car taken off the road. similar happened to my mum when she bought her BMW privatly, the old owners took it to theyre mechanic for a RWC and the company passed it off as road worthy, we took it to motorline at daisy hill and they found about 20 things wrong with it and some which where defective. we called up MTA and they said if they check it over and find things wrong with it, they will give us the fines, defect the car and take it off the road. then we have to file a law suit against the company that originally did the RWC and in the end after all the solicitors and shit it wouldnt of been worth it.


MTA(Motor Traders Association) cannot issue fines or even defect your car. I am a mechanic and an MTA member smile.gif

Only the Police or EPA(Environmental Pollution Authority) can issure fines or issue defects, please get your facts straight.

If your Mum's BMW passed a RWC prior to sale, it is irrelevant as it is counted as a safety inspection and is not really thorough. That is why I always recommend getting your own mechanic to inspect any car you wish to purchase.

ffeeky: Any updates on what happened with your car?

thats_hott_11
Post #174

that ass hole should be paying you who the hell was the idiot that did that man sue his stupid ass

Angelicious
Post #175

That wanker shouldn't even be in bussiness, poor workmanship and pathetic recovering, no one in their right mind could possibly even want to pay for an incomplete and unsatisfactory job done on their pride and joy!~ Sue the Prick!
Angel

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Login with Facebook

    Login using your Facebook account!

Page 5 of 6
Jump to page
THIS TOPIC HAS BEEN ARCHIVED
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
Loading...
x