Back

 Gm Performance 572cu In 720hp Crate Engine - holy crap  

Post Topic
hi_lux
  • hi_lux
  • LoLux
  • Member No.: 1,487
  • Joined: 7-February 03
  • Posts: 3,774
  • From: Brisbane
Post #1 post 9th August 2004 - 07:12 PM
http://www.gmgoodwrench.com/perfparts/flash/dyno.html


would be nice to see on aussie streets.

Mark.

--------------------
Looking for an adrenaline rush?? Joyflights over Brisbane / Moreton bay. PM for details.
TOP
MAD308
Post #2

Hell yeah! Movin on to bigger and better. rolleyes.gif

king of the concrete jungle
Post #3

Been around for a while now but very very hard to make emissions friendly for the emissions standards etc etc. And for another reaon GM Goodwrench don't like it much leaving the shores of the land of the free, not sure why but not the easiest engine to get hold of and if you do you need a fat bank account for the purchase price and own a refinery to afford to run it.

Bevan Boy
Post #4

yes please! wink.gif

VLTurbro
Post #5

Jesus christ imagine whacking something like that into a VN or a VS blink.gif

SupraCrazy
Post #6

HAHHAHAH left for days at a time.

QikRXTurbo
Post #7

Has some good gear, forged crank, rods, pins & pistons etc!!
Was looking at the specs. Would make a nice conversion, just gotta find an approximate price...

12498793 ZZ572/620 Deluxe Crate Engine
The Deluxe version of the ZZ572/620 engine includes the Base ZZ572/620 engine, plus the following items: aluminum water pump, 850 CFM Demon carburetor, flex plate, HEI distributor, aluminum Intake Manifold and red plug wires and looms.

Technical Notes: Horsepower 720 @ 6250 RPM
Torque 685 Ft. Lbs. @ 4500 RPM
Max. Recommended RPM 6750 RPM
Compression Ratio 12:1
Partial Engine 12498825
Block 25534368 Tall Deck
Bearing Kit, Main 88962212
Bearing Kit, Camshaft 12499434
Crankshaft 88961554 Forged 4340 Steel
Connecting Rod 88962926 Forged 4340 Steel
Bearing Kit, Connecting Rod 88961556
Piston & Pin 88963227 Forged Aluminum
Piston Ring 12499212 Plasma-moly
Camshaft 88962216 Mechanical roller
Balancer 88962814 SFI Approved
Cylinder Head 88961160 Aluminum
Gasket, Head 88961561
Rocker Covers, pair 12499200 "572"
Valve, Intake 12366987 2.25" Stainless steel
Valve, Exhaust 88963128 1.88" Stainless steel
Valve, Spring 88963933 Dual
Valve, Retainer 12366990 Chrome moly steel
Key, Valve Retainer 12366992
Shim, Valve Spring 88963937
Rocker Arm 12361323 Roller 1.7:1
Lifters 88962920 Roller
Push Rod, Intake 88962284 High performance one piece
Push Rod, Exhaust 88962283 High performance one piece
Oil Pan 10240721
Windage Tray, Oil 88962187
Gasket, Oil Pan 10106407
Oil Pump 88963707
Spark Plug 5613100 - R42XLS

bigafoot
Post #8

awsome engine ... now if only i can find that money tree ......

BoostedS15
Post #9

DAMN. thats a tough motor smile.gif lol

cheaper than building one yourself probably!


check out the torque! thats tops smile.gif

king of the concrete jungle
Post #10

The engine is $25,000 AUD, and quite often actually comes with over 800hp straight out of the create. That amount of money might seem like a lot but it's not if you tried to build the same thing. Imagine that in an old HK Monaro or something old school like that. Leave most cars for dead. Beautiful detail on the engine too tho and would look right at home in an old muscle car.

user posted image

Damone
Post #11

QUOTE (king of the concrete jungle @ Aug 10 2004, 01:25 PM)
own a refinery to afford to run it.

agreed.

would be very nice to have underfoot though

Post #12

Pretty piss poor burnout and pass for 700hp if you ask me

_Insane089_
Post #13

woah..... i wouldnt mind having one of those biggrin.gif

March_Hare
Post #14

I posted a link to a 632 BB forsale on ebay last week. Made over 1000hp and 900 pounds of torque in NA form with twin 1150 4 barrel carbs on top. ohmy.gif

here it is http://cgi.ebay.com/ebaymotors/ws/eBayISAP...&category=33615

VLTurbro
Post #15

QUOTE (king of the concrete jungle @ Aug 11 2004, 10:49 AM)
The engine is $25,000 AUD, and quite often actually comes with over 800hp straight out of the create. That amount of money might seem like a lot but it's not if you tried to build the same thing. Imagine that in an old HK Monaro or something old school like that. Leave most cars for dead. Beautiful detail on the engine too tho and would look right at home in an old muscle car.

user posted image

Damm straight imagine a old Kingswood or something with a engine like this in it going up against a Turboed Skyline the Skyline would get get Slaughtered biggrin.gif

70XIN
Post #16

Put it in a mini laugh.gif now that would be fun biggrin.gif

25K is a lot of money for an engine though facesjump.gif

VLTurbro
Post #17

QUOTE (70XIN @ Aug 11 2004, 05:53 PM)
Put it in a mini laugh.gif now that would be fun biggrin.gif

25K is a lot of money for an engine though facesjump.gif

700hp Chev engine in a Mini=Complete ownage thumbsup.gif

SupraCrazy
Post #18

QUOTE (Burnout @ Aug 11 2004, 09:33 PM)
QUOTE (70XIN @ Aug 11 2004, 05:53 PM)
Put it in a mini laugh.gif now that would be fun biggrin.gif

25K is a lot of money for an engine though facesjump.gif

700hp Chev engine in a Mini=Complete ownage thumbsup.gif

Also bent axles & chassis from the weight to laugh.gif

sidewayz
Post #19

QUOTE (Burnout @ Aug 11 2004, 09:33 PM)
QUOTE (70XIN @ Aug 11 2004, 05:53 PM)
Put it in a mini laugh.gif now that would be fun biggrin.gif

25K is a lot of money for an engine though facesjump.gif

700hp Chev engine in a Mini=Complete ownage thumbsup.gif

once you worked out how th fuk to fit it in a mini, then yu would hav to sit on the roof to drive cause there aint no room left inside.... dry.gif

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Forgotten your password?
  • Login with Facebook

    Login using your Facebook account!

THIS TOPIC HAS BEEN ARCHIVED
9 User(s) are reading this topic (9 Guests and 0 Anonymous Users)
0 Members:
Loading...
x