Intercooler Without Turbo  

Page 1 of 2
Jump to page
crazy_bunny
  • crazy_bunny
  • MY SPOON IS TO BIG
  • Contributing Member!
  • Member No.: 5,843
  • Joined: 2-November 03
  • Posts: 3,323
  • From: Brisbane
Post #1 post 7th November 2003 - 02:42 AM
Ive been toying round with the idea of using a smallish intercooler too cool the air goin into the manifold with out runing a turbo. Just want to know do you think it would have enough pressure and would it provide much of a HP boost. Also thinking of getting water/alcohole sprayer to spary the cooler.

--------------------
-\San"i*ty\, n. [L. sanitas, from sanus sound, healthy. See Sane.] The condition or quality of being sane; soundness of health of body or mind, especially of the mind; saneness...

punksnut
Post #2

hmmm well ur username does u justice laugh.gif

woody
Post #3

the intercooler will just block air flow and will do nothing

QUOTE (woody @ Nov 7 2003, 08:52 PM)
the intercooler will just block air flow and will do nothing

thats what i thought but wasent sure

Post #5

if you were going to do that, what was stopping you from going the whole hog?

wouldt/couldnt be that much more $$ on top of just a intercooler setup (could it? - dont flame me in a n00b tongue.gif)

IEATU
Post #6

i almost chocked on my coke when i saw the title LOL

SAAB 900
Post #7

mmmmmm coooke biggrin.gif

QUOTE (Xp3nd4bl @ Nov 7 2003, 08:58 PM)
if you were going to do that, what was stopping you from going the whole hog?

wouldt/couldnt be that much more $$ on top of just a intercooler setup (could it? - dont flame me in a n00b tongue.gif)

It would be for my brothers car. 2003 Mazda 323. He hasent got much money, and it would cost a fair bit on top of that, especilly if he wanted to turn up boost. I dont think the 1.8l will take lotsa boost(mite i be rong)like 6psi .

INDEEP
Post #9

Nope, i think the 'cooler would just restrict the air going to the engine more than anything... unless you put and air pump in between the 2, (also known as a supercharger! tongue.gif ) Better off to fit a sports filter and purchase, or make some kind of cold-air intake system...

TurbostyleR
Post #10

thats stupid man....

no offence

woody
Post #11

its a 2003 323, wasnt meant to go fast so dont bother, just drive it for a bit and when the time comes sell it an buy something quicker

Post #12

Deff. go for a cold-air intake they work wonders... (if done correctly)

QUOTE (woody @ Nov 7 2003, 09:13 PM)
its a 2003 323, wasnt meant to go fast so dont bother, just drive it for a bit and when the time comes sell it an buy something quicker

....... some of us arnt made of money and insurence gets too high. And its the car he wanted to buy not and import or a sechand domestic or something so thats what he has. if thats your view on it good for you but he wants that car and he wonts it to be quicker so if you dont like good for you. its like me saying that your car aint ment to be quick, that yours is slow. I know the mazda is slow but when its finished it could beat yours.

woody
Post #14

ummm i said when the time comes get another car, like when u can get insurance cheaper, have a fuckin teary jesus christ. u dont even know what car i drive fuckhead, i was just trying to give u my opinion

QUOTE (woody @ Nov 7 2003, 09:19 PM)
ummm i said when the time comes get another car, like when u can get insurance cheaper, have a fuckin teary jesus christ. u dont even know what car i drive fuckhead, i was just trying to give u my opinion

and..........you got my pieace. not having teary jsut saying cos it wasent ment to be fast and that not everyone likes it dont mine that it wont go fast and that someone could do something decent with it

crazy_bunny
Post #16

oh and i dont give a fuck what you drive, i mite like it i mite not.

edit: can we jsut keep to the subject here and pm if we want to take it further.
thx

OFI10
Post #17

*cough* wank value *cough* you got too much money if you have enought o put a FMIC on a NA car for the purposes of cold air intake. stupid and i dont think it will do a quarter the job of a decent cold air intake for NA anyway

Boosted GT
Post #18

An intercooler on a turbo has air pushed thru it, an atmo engine would be trying to suck air thru the filter, thru the pipes, thru the intercooler - you would have AWFUL throttle response and probably gain no power.

Get some heat shielding done up, run a boxed filter with a cold air feed. Make sure the pickup point for the cold air feed is actually getting air - it takes the easiest route, so if its easier to flow around your hose it will. Make it almost seal againt the place you take the air if you wish. If you wanted to go a little extreeme you could have a set of extractors put on it and get them thermal coated to trap in the heat, get some wrapping or coating put around the intake to the throttle body to keep the heat out.

Just my opinion. Chris

TurbostyleR
Post #19

hehehe poor crazy bunny....

You got drilled mate for asking a simple question...thats not on!

I apologise for my comment as well....

and as for the cooler on a na car...it wont work, because the whole point of having an intercooler on a turbo is to reduce the heat created with the charge from the turbo...

because air gets heated up by the turbo, and intercooler is necessary to bring those tempretures down...

In an atmo car an intercooler is not need because the air going into the throttle body has not been heated up by a turbocharger.

You could go for cold air induction with a twist if your seriously interested....

For example, one of my mates i used to work with was an engine builder and he built at atmo SR20DE that made something like 200+ hp....

for one of the induction mods he made a small compartment where you could put dry ice into....and whenever they took the car to the track they just filled the small compartment up with dry ice and as you drive along the air that was rammed into the filter had to go past the dry ice compartment and cooled the air down heaps...

thats one thing you can do i suppose if your really interested and got the time...

Hope that helps mate, and best of luck with your bros car!

Cheers,

Ahmed

`nigno
Post #20

fark thats a bit of trouble buyin ice everytime you wanna go to the track LOL ncie idea but I suppose somethin different......

crazy bunny, as everyone has said go cold air..... bu ti have osmething to add..... if oyu are willing to spend the money on an FMIC to get cooler air

why not spend the money you WERE willing to spend on that on something totally non cold air related that will give your car a a shitload more power than cold air will anyway?

hell fo rthe price of a decent front mount oyu could get a set of cams, or exhaust, heaps of shit have a think about what oyu wanna get done and how much money you want to spend.

TurbostyleR
Post #21

nos...nice and easy...

Pie
Post #22

good idea but impractical tongue.gif

QUOTE (crazy_bunny @ Nov 7 2003, 09:17 PM)
....... some of us arnt made of money and insurence gets too high. And its the car he wanted to buy not and import or a sechand domestic or something so thats what he has. if thats your view on it good for you but he wants that car and he wonts it to be quicker so if you dont like good for you. its like me saying that your car aint ment to be quick, that yours is slow. I know the mazda is slow but when its finished it could beat yours.

Mate I agree with Woody. It isn't a quick car to begin with and i don't think it ever will be without mega $$$ spent on it. Be happy with what you have until the time comes and then hock it for something that was made to perform.

thumbsup.gif

Tim_Ribs
Post #24

Seriously........

An "intercooled 2003 NA 323"? Say that to yourself a few times and see if you're still keen on the idea...

An intercooler will only work if the intake air is hotter than the ambient air (intercooler is a 'heat exchanger', not a magical cooling machine). If the intake air is the same temperature as the ambient air, it's not going to get colder than ambient is it?!!! IS IT!

Seriously....... think.

No comment on why you want to make a 323 into a sportscar... GTiR94 and Woody have already said it.

Boosted GT
Post #25

how rice would that sound?

I HAVE THIS FULLY SICK INTERCOOLED non TURBO 323

Drink.gif

TurbostyleR
Post #26

take it easy fellas....

he's just after some advice.... wink.gif

QUOTE (TurbostyleR @ Nov 7 2003, 02:11 PM)
take it easy fellas....

he's just after some advice.... wink.gif

i fukin agree hey!
not everyone who comes on here are experts, so get off your high horses dry.gif

Tim_Ribs
Post #28

I don't own a high horse.

EDIT: Just had an idea, why not just install the intercooler, but don't connect the pipe! You get the bling without the decreased performance of a great big useless intake tract!

neil_se
Post #29

in case you still missed the point, an intercooler will cool whatever is inside to air temperature, but the air going in is already at air temperature. simple hey?

but if its just the looks you're after i've got a big, cheap intercooler you can buy tongue.gif

HOON69
Post #30

will hinder your car more then help it,COLD AIR INDUCTION is the way to go.. thumbsup.gif

SupraCrazy
Post #31

FMIC isnt the way. Add cold-air then put the money towards an exhaust.

kingofspeed
Post #32

I have a mate at a workshop that can do it for you.

$3000 and it will raise your 'power level' massivley.

HA.

laugh.gif

TurbostyleR
Post #33

god damn smartarses.....

Post #34

why don't you buy a boost guage and blow off valve while your at it.

QUOTE (SUS07 @ Nov 7 2003, 09:00 PM)
i almost chocked on my coke when i saw the title LOL

Holy shit. Dejavu!

I was doing exactly the same thing when I read the post title.

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Login with Facebook

    Login using your Facebook account!

Page 1 of 2
Jump to page
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
Loading...
x