Back

 What Did You Do On Your Car Today+ - V2.0  

Page 35 of 66
Jump to page
Post Topic
MazdaTech
Post #1191

Finally got around to replacing the Timing belt, cam & crank seals and auxillary drive belts. Next weekend's project is front pads.

MJ80
Post #1192

Washed it, serviced it, drove it and fell in love with it again, cant wait to get onto the trails next weekend.

wbtonner
Post #1193

Washed it.
Then went and dried the tyres... :ph34r:

that_rodeo_guy
Post #1194

[quote name='wbtonner' timestamp='1321184723' post='1287881171']
Washed it.
Then went and dried the tyres... :ph34r:
[/quote]

Like.

MR2Mark
Post #1195

Rearranged and welded on fittings to w2a intercooler, oil change, started to play with cold start and idle setting on the ecu when noticed only had about 12 volts with the car running. Pulled alternator and will see about taking it somewhere and getting it fixed this week.

On the plus side exhaust has to come off to remove alternator so I got to putt around the yard making a heap of noise.

S2krazie
Post #1196

Officially sold the S/c kit. =(

B Unit
Post #1197

[quote name='wbtonner' timestamp='1321184723' post='1287881171']
Washed it.
Then went and dried the tyres... :ph34r:
[/quote]
You mean tyre :)

OT I got mine out of jail, towed from the holding yard to my mechanic, work begins tomorrow :)

E U R E K A M A D 9 4
Post #1198

alternator died on the commodore, looks like it just couldn't keep up with the stereo :(

wbtonner
Post #1199

[quote name='B Unit' timestamp='1321264220' post='1287883362']
You mean tyre :)

OT I got mine out of jail, towed from the holding yard to my mechanic, work begins tomorrow :)
[/quote]
My LSD works fine thanks :P

Its finally free!


OT- Parked it at work and watched the worksite across the road continue to move the mountains of sand, which is from where the Hilton in surfers was built. FML, black car and 100+ semi's or tippers + dogs going past it a day. Was filthy this arvy :(

clutch-monkey
Post #1200

solved my clearance issues with a cutting disc :mamoru:
[URL=http://imageshack.us/photo/my-images/208/picture7826.jpg/][IMG]http://img208.imageshack.us/img208/7214/picture7826.jpg[/IMG][/URL]

patrick_h_oz
Post #1201

Popped the bonnet, thought 'Too hot for this shit'.. closed bonnet lol.

Damn stupid little hoses in impossible to get at places! :head_wall: I think its going to be an inlet manifold off job to change it.. :mad:

wbtonner
Post #1202

[quote name='clutch-monkey' timestamp='1321313797' post='1287884446']
solved my clearance issues with a cutting disc :mamoru:
[URL=http://imageshack.us/photo/my-images/208/picture7826.jpg/][IMG]http://img208.imageshack.us/img208/7214/picture7826.jpg[/IMG][/URL]
[/quote]
Love your work!

BlownBMW
Post #1203

rubbed the daily, give it quick re-spray tomorrow i guess

[IMG]http://i42.photobucket.com/albums/e323/Blownbmw/302246_10150355740706968_710946967_8636560_697100809_n.jpg[/IMG]

clutch-monkey
Post #1204

seems like a lot of effort on a daily duane?

BlownBMW
Post #1205

[quote name='clutch-monkey' timestamp='1321348082' post='1287885682']
seems like a lot of effort on a daily duane?
[/quote]
to be honest, I dont think it will stay very daily-ish for long, lip kit, low offset dished wheels, and lowered a fair bit is on my mind lol

clutch-monkey
Post #1206

nice.. interested in how it turns out :)

RatDat
Post #1207

Daily passed RWC :dancingcool:

BlownBMW
Post #1208

[quote name='BlownBMW' timestamp='1321347949' post='1287885673']
rubbed the daily, give it quick re-spray tomorrow i guess

[IMG]http://i42.photobucket.com/albums/e323/Blownbmw/302246_10150355740706968_710946967_8636560_697100809_n.jpg[/IMG]
[/quote]
Painted :)

[IMG]http://i42.photobucket.com/albums/e323/Blownbmw/308239_10150357193201968_710946967_8641116_1804277021_n.jpg[/IMG]

Stompy
Post #1209

looks good.

OT test fitted new enkei's and found they rubbed. ran around all day trying to find tyres and spacers, got two tyres and spacers but found i need different nuts and i have to wait for two more tyres to come in as well.

Sharpy
Post #1210

Ran a PB at the drags
[img]http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/387405_10150950617210504_552890503_21600132_660403758_n.jpg[/img]

herp derp
Post #1211

[quote name='clutch-monkey' timestamp='1321313797' post='1287884446']
solved my clearance issues with a cutting disc :mamoru:
[URL=http://imageshack.us/photo/my-images/208/picture7826.jpg/][IMG]http://img208.imageshack.us/img208/7214/picture7826.jpg[/IMG][/URL]
[/quote]
bit small for a nine inch dont you reckon? i would have used a five with a ultra thing cutting disk, but then again im a pussy

craigosrepz
Post #1212

[quote name='BlownBMW' timestamp='1321420481' post='1287887460']
Painted :)

[IMG]http://i42.photobucket.com/albums/e323/Blownbmw/308239_10150357193201968_710946967_8641116_1804277021_n.jpg[/IMG]
[/quote]


Nice work, do you do cashies? Need my bumpers/2x gaurds painted on my accord. Same style you are looking to do!

Gave the accord a wash and new tires.

[img]http://img24.imageshack.us/img24/889/imag0614r.jpg[/img]

BAM!
Post #1213

[quote name='herp derp' timestamp='1321699021' post='1287894812']
bit small for a nine inch dont you reckon? i would have used a five with a ultra thing cutting disk, but then again im a pussy
[/quote]

Needs more of this:

[img]http://www.fastline.com/flimages/internet/024/103/2926241_2.jpg[/img]

Luke
Post #1214

Oil, oil filter, fuel filter and drive belt.

S2krazie
Post #1215

Stock seats back in the S2K. Car is now ready to sell, minus the OEM centre console (and inability to put the roof down or indicate on the road....)

patrick_h_oz
Post #1216

Fixed coolant leak in the gf's S13. Working by touch only is a pain- stupid short little heater hose hidden up under the back of the inlet manifold! Then I noticed it dropped a cylinder halfway through roadtesting. :head_wall: Grrr!

Luckily I still have a couple of spare coils somewhere, but that can be tomorrow's job.. if it is still happening. :ohnoes:

starclassic
Post #1217

Oil flush, then oil and filter change, put some de carbon stuff through it, some fuel cleaner additive. Followed by the fitment of a tacho :) and kill switch, and to top it all off some nice bright new H4 zenons.

ooo and i finally got around to refitting the gts badge on the grille ;) looks like sex.

latch broke
Post #1218

I pulled the door closed when I saw the 5-0

the_random_hero
Post #1219

Separated head and block, another few thousand kms and it looks like I would have had a BHG - then again the motors done 280k kms without being pulled down so not too bad. Attempted to remove driveshafts, 12pt socket is fucked for getting the big nuts off.

Zimma
Post #1220

Went to start it, webs were connecting the car to the house wall... Thought hmm a bit bothersome, cleared them, went to open handle and was greeted with this big fuck you from the spiders...

[IMG]http://i25.photobucket.com/albums/c80/zimma95/IMAG0100.jpg[/IMG]

So took a leaf from the evil dictator textbook and committed some more genocide, since the high pressure hose seems to have made even more come and occupy my car decided to implement harsher methods. Just over half a can of coles brand bug spray later, 20+ spiders lay dead as well as every moth, fly and other flying bug in the back of the driveway, literally a moth flew into backyard and dropped from the sky... Guess i should've worn a mask. :mamoru:

Luke
Post #1221

Not on my car, but actually on the model engine I bought :lol:

It was getting hardly any spark, so I pulled off the distributor to clean up the terminals. To do this, I also had to pull of the timing cover, timing belt, upper cylinder head, and cam. Reassembled, re-set the timing, and now it's working as it should. :D

BlownBMW
Post #1222

got my new intercooler, so did a little test fit.... should work out well :)

[IMG]http://i42.photobucket.com/albums/e323/Blownbmw/319663_10150366779501968_710946967_8676606_138347695_n.jpg[/IMG]

BlownBMW
Post #1223

[quote name='BlownBMW' timestamp='1321956305' post='1287901957']
got my new intercooler, so did a little test fit.... should work out well :)

[IMG]http://i42.photobucket.com/albums/e323/Blownbmw/319663_10150366779501968_710946967_8676606_138347695_n.jpg[/IMG]
[/quote]
Tight fit, but it does fit :)

[IMG]http://i42.photobucket.com/albums/e323/Blownbmw/317099_10150368752141968_710946967_8680369_522229978_n.jpg[/IMG]

Luke
Post #1224

Re-fitted the cargo barrier. It was the first thing that I removed when I bought the wagon, and it's been sitting under the house for over a year now.

Reason for re-fitting: Going away for a week with a bunch of friends, and they all drive hatch-backs/small cars, so my wagon has been deemed the packhorse.

AGI78-VP
Post #1225

booked it into hi torque for some work :D

twin 3" exhaust, hi flow cats, extractors
full cam package
underdrive pulley
NPC clutch kit

:D :D :D

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Forgotten your password?
  • Login with Facebook

    Login using your Facebook account!

Page 35 of 66
Jump to page
6 User(s) are reading this topic (6 Guests and 0 Anonymous Users)
0 Members:
Loading...
x