Back

 What Did You Do On Your Car Today+ - V2.0  

Page 20 of 66
Jump to page
Post Topic
S2krazie
Post #666

Aftercooling is working.
It was clogged with dust, and has possibly been clogged since I got it polished up last year.

Now the car is misfiring / backfiring / overfueling.

@#$!.

Geoff
Post #667

Neverending brad!

OT: Took passenger side head off:

[url=http://www.filedump.net/index.php?pic=p10107071310446968.jpg][img]http://www.filedump.net/dumped/p10107071310446968.jpg[/img][/url]

HAHAHAHA......................awesome :|

S2krazie
Post #668

[quote name='Geoff' timestamp='1310447010' post='1287566853']
Neverending brad!

OT: Took passenger side head off:

[url=http://www.filedump.net/index.php?pic=p10107071310446968.jpg][img]http://www.filedump.net/dumped/p10107071310446968.jpg[/img][/url]

HAHAHAHA......................awesome :|
[/quote]

^^^As you were saying... :lol:

[quote name='Geoff' timestamp='1310447010' post='1287566853']
Neverending [s]brad![/s] Geoff![/quote]

Fucking cars..

INVU
Post #669

washed the inside and outside of the car, replaced a few bulbs. now i just realised i forgot one :|

Shadow Of A Doubt
Post #670

Hahaha, Lol at you two!

I mean. Sorryforyourloss.


I bet the first thing that went thought you're head pulling that head off, was, ahh, that's not good.

GTRwilson
Post #671

Put 3 decent sized scratches down the drivers door when pushing it into the garage as the open door dragged along the brick wall as i watched the other side line up. FML. Luckily not HUGE, but still another panel to put on the list for the respray.

S2krazie
Post #672

[quote name='GTRwilson' timestamp='1310475279' post='1287568624']
Put 3 decent sized scratches down the drivers door when pushing it into the garage as the open door dragged along the brick wall as i watched the other side line up. FML. Luckily not HUGE, but still another panel to put on the list for the respray.
[/quote]

When your panels add up to more than bout 5, just get a full respray lol.

GTRwilson
Post #673

[quote name='S2krazie' timestamp='1310488956' post='1287568775']
When your panels add up to more than bout 5, just get a full respray lol.
[/quote]
haha im getting close then! Now its bonnet, front bar, left side skirt, drivers door.

S2krazie
Post #674

Played laptops today.

Connected the ECU to the laptop. Fixed all the fucked Map Sensor settings the tuner had in place <_<
Changed my fan settings to come on at 180 degrees F instead of 199.
Screen printed to MS Paint my fuel / ignition settings to verify with other S2Ki members.

E30_luv
Post #675

Lul, Wrong thread.

Half pulled my gearbox back out

Stompy
Post #676

Put a new battery in the work car. turns out whoever bought the last one probably just grabbed the cheapest one they saw. new battery is massive compared to the tiny thing that was in there.

S4rdonic
Post #677

Installed Head unit, rear speakers, amp, sub and laid wiring and setup crossovers for the front speakers. Need to make mounts so i can install the fronts. Should have it done by sunday night.

truffles
Post #678

Polished the S2000 and the R32 and rotated the wheels on the lancer. Productive....

dazzazoo
Post #679

tightened all the suspension/chassis bolts in the daily ... found the top nut in one of the struts was finger tight ... well that would explain that knocking when going over bumps :ohnoes:

Rileys
Post #680

took it in for its first proper service......feels so much better now

BlownBMW
Post #681

Engine bay pretty much empty now, ready to start welding up all the holes and smooth everything ready for paint....

[IMG]http://i42.photobucket.com/albums/e323/Blownbmw/264195_10150231755531968_710946967_7753339_1701007_n.jpg[/IMG]

E U R E K A M A D 9 4
Post #682

Took to it with an angle grinder, pics will be delivered soon!

Nothingman
Post #683

Put on new rubber sleeves to provide a proper seal, 3/8 of the old seals had pretty big cracks in them. Put the intake manifold back on connected everything up and gave it a test run, lo and behold the battery was out of charge. Will have to wait until tomorrow to find out if its all good.

MJ80
Post #684

Drove it on top of another car, srs.

truffles
Post #685

Replaced the shithouse old headlight switch with bad contacts in the R32.

FMX_22
Post #686

sanded More .......and more fkn over it lol

AGI78-VP
Post #687

pulled off the upgraded brakes and sold them, car's now sitting on axle stands till i can get rid of the rest of it

THORPE84
Post #688

cleaned it for the first time in 6 months, it is no longer "the tip on wheels"

GTRwilson
Post #689

[quote name='AGI78-VP' timestamp='1310819730' post='1287578818']
pulled off the upgraded brakes and sold them, car's now sitting on axle stands till i can get rid of the rest of it
[/quote]
how come dude? Your car went pretty damn well.

OT: hopefully going to buy some Bilstein rear shocks tomorrow and finally fit the fire extinguisher.

AGI78-VP
Post #690

[quote name='GTRwilson' timestamp='1310831783' post='1287579003']
how come dude? Your car went pretty damn well.

OT: hopefully going to buy some Bilstein rear shocks tomorrow and finally fit the fire extinguisher.
[/quote]

it did go well when it was going, but thats been the problem, ever since i started pushing for 350-400rwhp its had no reliability, and has cost me way to much in maintaining it, so its going

V3N0M
Post #691

Sold it!

j.d.m
Post #692

[b]3RZ-FE Lux[/b]

[list]

[*]Pulled out the engine from the ute
[*]Mounted from Engine Crane to Engine Stand
[*]Ripped apart whole motor to hundreds of bits
[*]Cleaned the head/block (washed down ready for quick neat spray job, just gloss black)
[*]Ordered V.R.S kits inc HDG and W/Pump
[/list]

all in 5 hrs. phew.

Tomorrow, Give Bottom end to Engine Reco guys so they can rebuild/replace parts needed. or might just get them to order it and just hone the walls and grind/balance crank...

stupid f**kin` sludge :pissed:

S2krazie
Post #693

Ordered a new set of iridium plugs.

the_random_hero
Post #694

Picked up what I thought was a set of ST184 calipers (which should bolt on to my car and allow me to run a ZZE123 rotor), came back to test fit them and they don't even slip over the standard rotors :rant2:
Hmm, one moment I'm checking measurements and the next thing my entire front end is in pieces next to me. Destroyed both ball joints getting them out, those little fucks.

GTRwilson
Post #695

Picked up the newly built gearbox today. Lets hope this one doesnt break too.....

Will probably drop it off to the boys at C&S during the week to install it.

S2krazie
Post #696

^DIY motherfucker!

GTRwilson
Post #697

[quote name='S2krazie' timestamp='1311342222' post='1287594542']
^DIY motherfucker!
[/quote]
Too hard on my own, and my friends dont even want to know about it haha. Trust me i want to.

wbtonner
Post #698

Took a deposit on the engine out of my One Tonner. Now have to start saving and making my mind up about either LS2+stroker+turbo OR Big Block Chev ;)

the_random_hero
Post #699

Went to pick hubs/knuckles up. Still aren't done, were meant to be done on Thursday. I want to have them machined and ready to be rebuilt by the end of the week.

rus_s13
Post #700

vacuum/ rubbish removal
scrubbed and cleaned the door trims of all grime/coke/vomit
put the dash back together
scrubbed clean all the door jams and surrounds areas; took an hour or two but looks brand new.

tomorrow its a bucket of cutting compound, windows, paint on the door, speakers in, minor service and removing all said grime from the rest of the dash and interior.
not to mention tire shine. B)

i love the weekend...

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Forgotten your password?
  • Login with Facebook

    Login using your Facebook account!

Page 20 of 66
Jump to page
7 User(s) are reading this topic (7 Guests and 0 Anonymous Users)
0 Members:
Loading...
x