Back

 What Did You Do On Your Car Today+ - V2.0  

Page 17 of 66
Jump to page
Post Topic
khubner
Post #561

i hacked a thermo fan switch and part of the loom outa one car and spliced it into my loom. so that my thermo fans work. i even used relays and stuff. now all i gotta do is replace what i cut out of the other car.

VersionR
Post #562

Bought a running 18RC and 5spd for $200 to chuck in the Celica to get it moving while I 'accrue' more cash to rebuild the 18RGEU, other than that, not much, for at least 2 weeks now. Disappointing, meant to have it finished by my october deadline.

MR2Mark
Post #563

Installed new iphone compatible headunit in brothers e30, oil and filter change on that too.

Put rodded/cleaned/new end tanks radiator back in aw11 after flushing engine and lines etc. Pulled ignition barrel out and got the snapped off key that has been stuck in it for 2 years out. I will miss starting it with 5 cent piece :(

All pleasantly easy jobs considering normal mr2 fare :)

Rileys
Post #564

[quote name='MR2Mark' timestamp='1307958438' post='1287487767']
Installed new iphone compatible headunit in brothers e30, oil and filter change on that too.

Put rodded/cleaned/new end tanks radiator back in aw11 after flushing engine and lines etc. Pulled ignition barrel out and got the snapped off key that has been stuck in it for 2 years out. I will miss starting it with 5 cent piece :(

All pleasantly easy jobs considering normal mr2 fare :)
[/quote]

none of my involvements with working on mates MR2's could be described as pleasant

S2krazie
Post #565

I installed the 74mm TB today. What a bitch that was for what would otherwise been a simple 20 minute job... The old BDL TB had the map sensor underneath. The bracket for the S/c slipped tight over the top so I couldn't get it off, so I had to undo the aftercooler, its hoses, undo the bracket, just to slip the map sensor plug off. Bolted the TB on, only to find the same problem of the butterfly not closing properly. Adjusted the throttle cable to where it needed to be and BAM problem fixed. There was probably nothing wrong with the old BDL one... I fail to understand how people call themselves mechanics where workshops charge about 80-120/hr if they can't adjust a simple TB cable... Old saying rings true, want something done right, you gotta do it yourself...

Anyway, put everything back together and now the car now idles solid each time, the only thing is its idling at 3000rpm :lol: Way too high, should be about 1000rpm, however its a marked improvement from the old BDL setup with 1000, 1500, 2000, 3000, 3500, 2500 rpm idle variances it had before with the TB opening and TB cable not positioned right.

As for my Reichard Racing pulley.... dumbarses sent it by sea mail, not airmail as I paid and instructed them to do so, so now it wont arrive for another 4-6wks - which is unacceptable. Tomorrow I will throw on the smaller belt I ordered (1/2cm smaller, thus tighter fit) for the Reichard Racing pulley and hopefully that will fix my belt slip issues temporarily until the new pulley arrives in 4-6wks time.. I would of put the smaller belt on today, but it was getting dark in the backyard and looked like it was about to rain at any moment.

Be-Hating
Post #566

[quote name='chaserface' timestamp='1307955699' post='1287487560']
just test fitting new rims

[img]http://i464.photobucket.com/albums/rr3/luke111_bucket/DSC00126-1.jpg[/img]
[/quote]


Fuck that's ghetto!
lol-gasm

the_random_hero
Post #567

[quote name='S2krazie' timestamp='1308123671' post='1287493021']
I installed the 74mm TB today. What a bitch that was for what would otherwise been a simple 20 minute job... The old BDL TB had the map sensor underneath. The bracket for the S/c slipped tight over the top so I couldn't get it off, so I had to undo the aftercooler, its hoses, undo the bracket, just to slip the map sensor plug off. Bolted the TB on, only to find the same problem of the butterfly not closing properly. Adjusted the throttle cable to where it needed to be and BAM problem fixed. There was probably nothing wrong with the old BDL one... I fail to understand how people call themselves mechanics where workshops charge about 80-120/hr if they can't adjust a simple TB cable... Old saying rings true, want something done right, you gotta do it yourself...

Anyway, put everything back together and now the car now idles solid each time, the only thing is its idling at 3000rpm :lol: Way too high, should be about 1000rpm, however its a marked improvement from the old BDL setup with 1000, 1500, 2000, 3000, 3500, 2500 rpm idle variances it had before with the TB opening and TB cable not positioned right.

As for my Reichard Racing pulley.... dumbarses sent it by sea mail, not airmail as I paid and instructed them to do so, so now it wont arrive for another 4-6wks - which is unacceptable. Tomorrow I will throw on the smaller belt I ordered (1/2cm smaller, thus tighter fit) for the Reichard Racing pulley and hopefully that will fix my belt slip issues temporarily until the new pulley arrives in 4-6wks time.. I would of put the smaller belt on today, but it was getting dark in the backyard and looked like it was about to rain at any moment.
[/quote]

Nothing in your car is simple - don't you remember the fuckaround trying to get your intake manifold off?!

ben042
Post #568

I enjoyed the rear right shock absorber in my car blow. Thats now the front two AND that one! what a fun trip it is, going down the highway on just springs.

Geoff
Post #569

Put the front end back together-ish. What an absolute clusterfuck of failure.

Every. Single. Last nut and bolt was rusted and siezed something ludicrous. Jesus tittyfucking christ. Just have to put the diff cover on, replace the tie rod end and then get a wheel alignment.

Seriously, this has been fucked.

BUT I WON THIS TIME, PAJERO.

S2krazie
Post #570

[quote name='the_random_hero' timestamp='1308132273' post='1287493615']
Nothing in your car is simple - don't you remember the fuckaround trying to get your intake manifold off?!
[/quote]

I'd forgotten about that. Thanks for reminding me........ :glare: haha

clutch-monkey
Post #571

aw they're so cute together.. :mamoru:
[URL=http://imageshack.us/photo/my-images/641/picture7594.jpg/][IMG]http://img641.imageshack.us/img641/5876/picture7594.jpg[/IMG][/URL]

S2krazie
Post #572

Fucking fuck, fuck yes!

Few days late, but I fucking forgive you!

[img]http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/247550_2062586413160_1499720668_32277438_2402782_n.jpg[/img]

Akshunhiro
Post #573

Stop posting and fit the thing!

clutch-monkey
Post #574

had to quickly find a way to wheel it around. improvised :bowrofl:
[URL=http://imageshack.us/photo/my-images/594/picture7598.jpg/][IMG]http://img594.imageshack.us/img594/3191/picture7598.jpg[/IMG][/URL]

VersionR
Post #575

^ Wouldn't have been that heavy to pick up surely

rolla boi
Post #576

Cleaned the head and block, waiting for my new gasket to arrive in the post :)

starclassic
Post #577

Painted rocker cover and few various caps, chrome dipstick and breather/oil cap chrome airfilter with k&n

scoobzd
Post #578

Checked tyre pressures, topped up clutch fluid (reservoir is leaking)& put in a new thermostat

Gotta replace that Master cylinder soon !

Be-Hating
Post #579

[quote name='starclassic' timestamp='1308482310' post='1287504058']
Painted rocker cover and few various caps, chrome dipstick and breather/oil cap chrome airfilter with k&n
[/quote]

Do you have a hq?

scoobzd
Post #580

His HQ [url="https://www.boostcruising.com/forums/index.php?showtopic=727454"]https://www.boostcruising.com/forums/index.php?showtopic=727454[/url] :thumbsup:

wbtonner
Post #581

Put pressure in the tyres as one was a bit low. Discovered it has a slow leak, now I have to refill it every 2-3 days. Its not worth getting it fixed for $30 as i'm getting new tyres next weekend. Found some wheels I like the look of for my daily but not sure if I should yet. ;)
These:
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=170636602774&ssPageName=STRK:MEWAX:IT

And these:
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=280592434887&ssPageName=STRK:MEWAX:IT

Lol at chaserface and his dodgy stands. Seriously dude, you can buy car stands for like 40 bucks a pair new, and like 5-10 bucks each at swap meets.

Be-Hating
Post #582

Sooo nice....

Zed7fiddy
Post #583

Installed a new Security System:

[IMG]http://i103.photobucket.com/albums/m147/co8ra/IMAG0036.jpg[/IMG]

Shadow Of A Doubt
Post #584

[quote name='Zed7fiddy' timestamp='1308536502' post='1287505157']
Installed a new Security System:

[IMG]http://i103.photobucket.com/albums/m147/co8ra/IMAG0036.jpg[/IMG]
[/quote]
:bowrofl:

Luke
Post #585

Just an oil and filter change yesterday.

j.d.m
Post #586

drive the car like this from slacks creek to sunnybank hills. on a widebody camry.....

[img]http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/263401_10150224794178926_711443925_7134822_6983081_n.jpg[/img]

[img]http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/260356_10150224794058926_711443925_7134820_7823628_n.jpg[/img]

ROO
Post #587

Drove 1/2 way home with speaker wires for a hand throttle (accelerator cable snapped)

Oh what a feeling.. :jerkit: vroom vroom

LaynLo
Post #588

Installed a minispool on my R31 skyline and took the long way home from work

ben042
Post #589

Washed it. Then kicked it.

GTRwilson
Post #590

[quote name='LaynLo' timestamp='1308743080' post='1287513449']
Installed a minispool on my R31 skyline and took the long way home from work
[/quote]
get an LSD knob.

LaynLo
Post #591

[quote name='GTRwilson' timestamp='1308744275' post='1287513509']
get an LSD knob.
[/quote]
get a dick in your mouth cock sucker

S2krazie
Post #592

Installed a TB.

astorey
Post #593

Washed and detailed ready for sale tonight and hopefully pick up track car this weekend. :hsdance:

GTRwilson
Post #594

[quote name='LaynLo' timestamp='1308782183' post='1287513996']
get a dick in your mouth cock sucker
[/quote]
Typical R31 driver. I hope you crash with that spool, cheap skate.

OT: dropping the car off at the gearbox specialist tonight so he can replace a couple of bits that are playing up. Will pick it up friday arvo and hopefully have zero rev flares on gear changes!

S2krazie
Post #595

Drove it for more than 500m for the first time in over a month.

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Forgotten your password?
  • Login with Facebook

    Login using your Facebook account!

Page 17 of 66
Jump to page
7 User(s) are reading this topic (7 Guests and 0 Anonymous Users)
0 Members:
Loading...
x