Back

 What Did You Do On Your Car Today+ - V2.0  

Page 10 of 66
Jump to page
Post Topic
chaserface
Post #316

QUOTE (Protius @ Apr 23 2011, 03:06 PM) *
Like this?





I was hesitant to give it a go because I've never been shown how to spray paint or ever had a go at it, but after doing the wing yesterday I decided to do the bumper today. Replacement front guards and drivers door are going to be under way tomorrow.

When I can eventually afford to get it resprayed professionally I will as my painting skills aren't the greatest by far, bit orange peely by hey, doesn't look too bad.

Oh and it's not a 'kit' its a factory front bar with optional factory lip, all nissan original plastic from Japan. biggrin.gif


WINNING!!! luxury side skirts and lip next?

chaserface
Post #317

also protius, did you use a spray gun or a pressure pack?

op; removed dildo gear knob and put golf ball in place. also fitted candy steering wheel.
VenomRC
Post #318

QUOTE (chaserface @ Apr 23 2011, 04:45 PM) *
also protius, did you use a spray gun or a pressure pack?

op; removed dildo gear knob and put golf ball in place. also fitted candy steering wheel.

Begging for a dicking from the popo eh =P

S2krazie
Post #319

20% off sale @ Supercheap, bought a K&N 3.25" inlet air filter for the custom intake arm.
Fits perfectly, fucking win!

Protius
Post #320

QUOTE (chaserface @ Apr 23 2011, 04:45 PM) *
also protius, did you use a spray gun or a pressure pack?

op; removed dildo gear knob and put golf ball in place. also fitted candy steering wheel.

Grav fed gun with 2pak primer and 2pak solid, no clear necessary. And no to the luxo skirts, getting some navan skirts and s1 rear pods.

chaserface
Post #321

QUOTE (Protius @ Apr 23 2011, 04:55 PM) *
Grav fed gun with 2pak primer and 2pak solid, no clear necessary. And no to the luxo skirts, getting some navan skirts and s1 rear pods.


i gave up looking for navan skirts and just got luxo's. j autos has some navan pods for 250.

Protius
Post #322

QUOTE (chaserface @ Apr 23 2011, 04:56 PM) *
i gave up looking for navan skirts and just got luxo's. j autos has some navan pods for 250.

I should be getting skirts and pods for $250ish just waiting for them to come thumbsup.gif

wbtonner
Post #323

QUOTE (kawasaki18 @ Apr 22 2011, 09:54 PM) *
took off tray on my new tonner rewired up gts dash coz last guy was too dipshit to do it right

You bought a Tonner!!! Much respect!

And bought a new daily/ work hack/ tow car. Pick it up next week, bloody easter holidays getting in the way wink.gif.

HarleyJace
Post #324

https://www.youtube.com/watch?v=u3HFccSoRgc...nel_video_title

Got it running! Fuels stale so won't run without aerostart so going to drain the fuel, put new shit in it. Needs an AFM then I can run it goooood! Need a new slave, think mine is buggered.

HarleyJace
Post #325

https://www.youtube.com/watch?v=u3HFccSoRgc...nel_video_title

Got it running! Fuels stale so won't run without aerostart so going to drain the fuel, put new shit in it. Needs an AFM then I can run it goooood! Need a new slave, think mine is buggered.

^COOKIE^
Post #326

Put all the lights and doors back on the XF. Going to the paint shop next week. Prob do more under the bonnet tomorrow

Capriv8
Post #327

Completely gutted out then fitted a Mk2 dash to the Mk3 shell, finished the loom off, repaired and replaced damaged rear bumper, swapped the Mk3 rear subframe with the Mk2's which had better shocks and swaybar etc...

It's coming together nicely wink.gif


Attached File  DSC04096.JPG ( 333.53K ) Number of downloads: 43
Attached File  DSC04066.JPG ( 370.53K ) Number of downloads: 40
Attached File  DSC04092.JPG ( 359.73K ) Number of downloads: 39
 
Protius
Post #328

Fitted the door I painted yesterday.
Geoff
Post #329

More work on the old HJ45 ute.

Rebuilt the exhaust after it got ripped off thrashing through the bush mustering. Pretty ghetto stuff but it should be a bit less prone to needing repairs.

All of the tray-to-chassis mounts cracked at the welds so i had to zap them back up again. Whoever built the tray on this didnt do a very good job so im going to have to hunt around for some 125x50 RHS or something aimiliar to make a rear light bar/numberplate holder as it also forms an integral part of the tray mount and the 1.5mm C Channel thats been used just wasnt up to the task. I dont know what ill do yet but i seem to be putting an awful lot of though into what is really just a bush hack. All good fun though.

Also, chased wild scrubber bulls through the bush one by one.
Twat In The Hat
Post #330

The fitment looks a bit off :S

Protius
Post #331

QUOTE (Twat In The Hat @ Apr 25 2011, 05:45 PM) *
The fitment looks a bit off :S

Yeah it hangs down a little, going to adjust when I have the guard off to replace it.

Twat In The Hat
Post #332

Ahh nice

clutch-monkey
Post #333

engine out..
GTRwilson
Post #334

QUOTE (clutch-monkey @ Apr 25 2011, 07:27 PM) *
engine out..

I wish i had the kind of shed space you do. whats it coming out for?

089JAY
Post #335

Picked up the Paint for the top half of the Commodore tonight, if you're lucky I'll take a snap later...

clutch-monkey
Post #336

QUOTE (GTRwilson @ Apr 25 2011, 10:33 PM) *
I wish i had the kind of shed space you do. whats it coming out for?

well i took it out of the bent chassis - reason being is that i need the suspension buts cut off the bent chassis and welded to the new chassis.
easier to transport/do with the driveline out, and gives me a chance to clean it up besides

W1NT3R
Post #337

Wound Down Zee Coilovers biggrin.gif

pengh
Post #338

me and my mate put a twin plate in my s14(didnt really have a clue how to install a clutch but still had a go) and fuk me...never again...wasnt as easy as everyone thought but 3 days later and with help from some mates(on the 3rd day) and a grinder we did it smile.gif

E30_luv
Post #339

Tensioned up everything I hadn't gotten around to doing
Wound up the coilovers so the engine crane can fit under so I can put the engine back in.
Took it off jack stands.
chaserface
Post #340

i drove it! with the licence that i now have!

Jo3y87
Post #341

QUOTE (chaserface @ Apr 26 2011, 03:20 PM) *
i drove it! with the licence that i now have!


grats biggrin.gif I have to wait til thursday for money to do anything sad.gif Gonna change to some HPR 30 oil, redline MT90 and do the radiator//thermostat with some help from a friend.

Bob
Post #342

bought it....joy. pics up later this week.

S2krazie
Post #343

QUOTE (clutch-monkey @ Apr 25 2011, 07:27 PM) *
engine out..


Needs moar build thread.

Goku
Post #344

Fitted a front gearbox bush Kartboy.

clutch-monkey
Post #345

QUOTE (S2krazie @ Apr 26 2011, 05:28 PM) *
Needs moar rebuild thread.

fixed

W1NT3R
Post #346

Put HID's in biggrin.gif

williams9394
Post #347

i do a lot of travelling and have never once bought one........but the nullarbor was pretty cool so i decided to immortalise that epic adventure in self adhesive form.Today I looked at it, saw its sitting about 1" deep in grassy water from todays rain and came to the conclusion if I try to move it I will a) get wet feet but more importantly 2) bog it.. So it can sit there until the ground dries.

---------------------------
dublin property

Joyrid3r
Post #348

QUOTE (williams9394 @ Apr 26 2011, 06:36 PM) *
i do a lot of travelling and have never once bought one........but the nullarbor was pretty cool so i decided to immortalise that epic adventure in self adhesive form.Today I looked at it, saw its sitting about 1" deep in grassy water from todays rain and came to the conclusion if I try to move it I will a) get wet feet but more importantly 2) bog it.. So it can sit there until the ground dries.

---------------------------
dublin property


laugh.gif @ bot....

Timmyp34
Post #349

Went for a high speed run! my new turbo is crazy fast!
W1NT3R
Post #350

No Tailshaft?

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Forgotten your password?
  • Login with Facebook

    Login using your Facebook account!

Page 10 of 66
Jump to page
7 User(s) are reading this topic (7 Guests and 0 Anonymous Users)
0 Members:
Loading...
x