Back

 Rda High Performance Disc Rotors - GSL RallySport  

Page 4 of 7
Jump to page
Post Topic
Stokesy
Post #106

can you pm me a price on a full set of slotted dba for my ve ss ute

thanks

Chipokae
Post #107

Hi, is probably a long shot but i am after a set of slotted fronts and slotted rears for 2006 Ralliart Colt. Im sure there will a number of people interested if you can find the right fit for us. I have taken the rear rotors off and measured them up so i can give you the dimentions if you need. Would there be a group buy price if I can stir up some interest in this?

gslrallysport
Post #108

Hi mate,

Yep, we've had this questions a few times now, and as it stands, there's nothing available what so ever on the market that we, or anybody else can find.

Regards
Greg

Stanislav
Post #109

DRA front slotted for 1992 s13?

gslrallysport
Post #110

1.8 or 2L?

stagman
Post #111

Hi, returning customer here.

Anything available for 1998 Nissan Stagea Series 2 4WD?

http://www.skylinesaustralia.com/forums/St...kes-t82083.html

Looks like Front Disc Rotors - DBA 4963 (R33 GTST) modified by machining down the OD by 6mm

Rear Disc Rotors - DBA 4908 (R32GTR), modified by machining down the OD by 5mm.

What would be the equivalent RDA's in standard rotors and slotted and how much inc del to Melbourne?

TurboA1j
Post #112

hey mate
how much for front slotted rotors for an 88 a70 supra?

gslrallysport
Post #113

QUOTE(stagman @ Jan 14 2009, 09:42 PM) [snapback]1283425847[/snapback]

Hi, returning customer here.

Anything available for 1998 Nissan Stagea Series 2 4WD?

http://www.skylinesaustralia.com/forums/St...kes-t82083.html

Looks like Front Disc Rotors - DBA 4963 (R33 GTST) modified by machining down the OD by 6mm

Rear Disc Rotors - DBA 4908 (R32GTR), modified by machining down the OD by 5mm.

What would be the equivalent RDA's in standard rotors and slotted and how much inc del to Melbourne?

Hi mate,

With the Skylines stuff it'll be cheaper when you factor in freight to get them through the SAU group buy.

Cheers,
Greg

gslrallysport
Post #114

QUOTE(TurboA1j @ Jan 14 2009, 10:27 PM) [snapback]1283426080[/snapback]

hey mate
how much for front slotted rotors for an 88 a70 supra?

Hi mate,

$195 for a pair of slotted.

Regards,
Greg

MoDo
Post #115

Hi man.. Was wondering how much for a set of EBC Gold Passivated Slotted and Dimpled for a my08 wrx. Its amazing that these have been out for over a year but so hard to find gear for them. PM me the response cheers

ETHNIC_RUSH
Post #116

hey,
how much for regular dics for a honda crx Generation 2 1988 and for the front lol

gslrallysport
Post #117

QUOTE(ETHNIC_RUSH @ Jan 27 2009, 02:21 AM) [snapback]1283481780[/snapback]

hey,
how much for regular dics for a honda crx Generation 2 1988 and for the front lol

Hi mate,

Standard front rotors would be $44 each delivered to you.

Cheers,
Greg



QUOTE(MoDo @ Jan 25 2009, 02:46 PM) [snapback]1283474467[/snapback]

Hi man.. Was wondering how much for a set of EBC Gold Passivated Slotted and Dimpled for a my08 wrx. Its amazing that these have been out for over a year but so hard to find gear for them. PM me the response cheers

I'll give them a bell and see what I can find out.

Regards,
Greg

piratedriftr
Post #118

what are my options front and rear for a 1994 180sx SR20DET non-hicas 4 stud? and delivered to 4114

gslrallysport
Post #119

QUOTE(piratedriftr @ Feb 4 2009, 08:25 PM) [snapback]1283528803[/snapback]

what are my options front and rear for a 1994 180sx SR20DET non-hicas 4 stud? and delivered to 4114

Hi mate,

Front Rotors
Std - $62 each
Slotted - $195 Pair
EBC Gold Passivated Slotted and Dimpled - $329 pair

Rear Rotors
Std - $66 each
Slotted - $198 Pair
EBC Gold Passivated Slotted and Dimpled - $335 pair

Delivery to you would $11.

Regards,
Greg

88SCMR2
Post #120

hi mate how much for a front set of slotted rotors for 1988 aw11 mr2 and delivery to 4127 cheers

gslrallysport
Post #121

QUOTE(88SCMR2 @ Feb 16 2009, 05:50 PM) [snapback]1283588713[/snapback]

hi mate how much for a front set of slotted rotors for 1988 aw11 mr2 and delivery to 4127 cheers

Hi mate,

A pair of front slotted rotors is $175 shipped to you.

Regards,
Greg
Alainuae
Post #122

front slotted rotors for a 88 crx plus shipping to brisbane 4131

gslrallysport
Post #123

QUOTE(Alainuae @ Feb 18 2009, 07:31 AM) [snapback]1283598626[/snapback]

front slotted rotors for a 88 crx plus shipping to brisbane 4131

Hi mate,

$169 shipped.

Regards,
Greg

rasta
Post #124

g'day just chasing up options and pricing for

1994 BMW E36 318IS

Rotors all round and pads to suit

cheers!!

John M
gslrallysport
Post #125

Hi John,

What's the car being used for? Is it just a street car, or get tracked etc.? Were you after standard or slotted rotors, and what level of pad performance you were chasing?

Regards,
Greg

rasta
Post #126

Hi Greg
street car only but i do a little bit of "hard driving". pricing on slotteds rotors would be awesome. Good performance street pads would be good as i do city driving daily and dont want pads that need heating up to perform well.


Cheers

John M

gslrallysport
Post #127

John,

Too easy mate. Slotted rotors are $189 per pair front or rear. Pads, in your case, I'd go TRW Lucas, excellent street pads, but still with very good performance. $79 per axle set front or rear. All up $536 delivered to you.

Regards,
Greg

beau1
Post #128

hey mate,
after a price on slotteds and pads for my 1988 vl commodore wagon

gslrallysport
Post #129

Hi mate,

Slotted rotors for your VL (6cyl N/A I'm assuming?) is:
- Front $185 pair
- Rear $145 pair

Pads
- HPX $79 per axle set front or rear
- A1RM $119 per axle set front or rear

We do currently have a half price rears deal, which means you can get front and rear HPX for $131 delivered, or front A1RM and rear HPX for $171 delivered.

Quick run down on the pads:
- The HPX is a Bendix Ultimate type performance pad, good for about 550 degrees, whilst being virtually dust free, and low rotor wear.
- The A1RM is a Ferodo DS2500 type performance pad, good for about 780 degrees, but will still work from dead cold (A1RM and HPX have the same cold friction), and relatively low dust and rotor wear. I run the A1RM in both my daily road car and rally car and it isn't a compromise in either.

Or for more info checkout:
https://www.boostcruising.com/forums/index....howtopic=365944
or
http://www.qfmperformance.com

Regards,
Greg

beau1
Post #130

QUOTE(gslrallysport @ Feb 23 2009, 09:17 AM) [snapback]1283624727[/snapback]

Hi mate,

Slotted rotors for your VL (6cyl N/A I'm assuming?) is:
- Front $185 pair
- Rear $145 pair

Pads
- HPX $79 per axle set front or rear
- A1RM $119 per axle set front or rear

We do currently have a half price rears deal, which means you can get front and rear HPX for $131 delivered, or front A1RM and rear HPX for $171 delivered.

Quick run down on the pads:
- The HPX is a Bendix Ultimate type performance pad, good for about 550 degrees, whilst being virtually dust free, and low rotor wear.
- The A1RM is a Ferodo DS2500 type performance pad, good for about 780 degrees, but will still work from dead cold (A1RM and HPX have the same cold friction), and relatively low dust and rotor wear. I run the A1RM in both my daily road car and rally car and it isn't a compromise in either.

Or for more info checkout:
https://www.boostcruising.com/forums/index....howtopic=365944
or
http://www.qfmperformance.com

Regards,
Greg


Hey greg,

would you happen to have any of the vl (Rb30 n/a) front pads and front slotted rotors in stock?

cheers

pjf_lude
Post #131

price on standard and a price on slotted for 2002 dc5 type r front rotors (300mm)

also looking for clues as to where to go to get the stud pattern re-drilled in Brisbane?

gslrallysport
Post #132

QUOTE(beau1 @ Feb 26 2009, 05:54 AM) [snapback]1283643712[/snapback]

Hey greg,

would you happen to have any of the vl (Rb30 n/a) front pads and front slotted rotors in stock?

cheers

Hi mate,

Yep, got both front slotted rotors, and both HPX and A1RM pads in stock. $185 for the rotors, and $79 and $119 respectively for the pads.

Regards,
Greg


QUOTE(pjf_lude @ Feb 26 2009, 06:47 AM) [snapback]1283643748[/snapback]

price on standard and a price on slotted for 2002 dc5 type r front rotors (300mm)

also looking for clues as to where to go to get the stud pattern re-drilled in Brisbane?

DC5 Type R with (Jap) or without (Aus) Brembo calipers? Both have 300mm rotors, but there's 10mm difference in hat height.

beau1
Post #133

where abouts are you guys at? and do you have eftpos or cash only
gslrallysport
Post #134

Hi mate,

Since we sold our workshop we've gone to a purely mobile parts supply business. We have eftpos available, but only for credit card over the phone, or else I can email you an invoice with direct deposit details. Where about are you located? Either we'd throw it on one of our delivery runs, to throw it on a courier.

Regards,
Greg

pjf_lude
Post #135

QUOTE(gslrallysport @ Feb 26 2009, 09:18 AM) [snapback]1283644135[/snapback]


DC5 Type R with (Jap) or without (Aus) Brembo calipers? Both have 300mm rotors, but there's 10mm difference in hat height.


Aus version with the non-brembo calipers

gslrallysport
Post #136

Standard, $95 each
Slotted, $259 for the pair

Unfortunately no help on the re-drilling, but any half decent machine shop would be able to.

Regards,
Greg
foamer_69
Post #137

Hey mate,
how much for a set of r33 gtst front slotted rottors

also, do you sell red stuff brake pads for same model?

gslrallysport
Post #138

QUOTE(foamer_69 @ Mar 7 2009, 01:01 PM) [snapback]1283693620[/snapback]

Hey mate,
how much for a set of r33 gtst front slotted rottors

Hey mate,

$355 for a pair of slotted.

QUOTE
also, do you sell red stuff brake pads for same model?

We do stock EBC, but the QFM A1RM is a FAR better pad than red stuff, and is also miles cheaper. Checkout http://www.qfmperformance.com and there's a stack of reports and links to Skylines Australia members who have tried both and rated them.

The QFM A1RM is $119 per axle set, but until the end of March we've got a half price rears deal which means you can get front and rear A1RM for $191 delivered.

Regards,
Greg
FST91
Post #139

can i get a price on rotors for 1998 VR4 galant

gslrallysport
Post #140

Hi mate,

In slotted
- Front $289 pair
- Rear $265 pair

In Standard
- Front $110 each
- Rear $98 each

Regards,
Greg

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Forgotten your password?
  • Login with Facebook

    Login using your Facebook account!

Page 4 of 7
Jump to page
THIS TOPIC HAS BEEN ARCHIVED
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
Loading...
x