Back

 Vy Seats Into Vt? - how hard  

Post Topic
mAttS hSvS
  • mAttS hSvS
  • aKa Matts_HsVs
  • Member No.: 83,590
  • Joined: 12-October 07
  • Posts: 415
  • From: Adelaide
Post #1 post 1st July 2008 - 04:42 AM
ok guys needing new interior for my vt was considering vy seats front and back, has anyone done this? what is needed to be done for it to work ? im guessing the vy seats wont just bolt strait into a vt series2
thanks

--------------------
.....BoOsTed FoR LiFe...
QUOTE(B Unit @ Apr 19 2009, 12:03 AM) [snapback]1283925474[/snapback]

He is 46. Any more growing up and he will be dead.
TOP
20VGT
Post #2

I am 90% certain they WILL bolt straight in.

The VT and VY share the same chassis and floor pan. In fact the front ends are interchangeable etc. They are basically the same car.

mAttS hSvS
Post #3

QUOTE(20VGT @ Jul 2 2008, 06:33 AM) [snapback]1282553699[/snapback]

I am 90% certain they WILL bolt straight in.

The VT and VY share the same chassis and floor pan. In fact the front ends are interchangeable etc. They are basically the same car.



really? what about door trims spose its a long shot but still, with front end would just need bonnet ,grill and front bar yeh? all from standard vy should fit? my mind is racing with possibilitys now haha

20VGT
Post #4

The doors are the same, so the trims should fit fine, however, the trims may not line up with the dash correctly. Unless you change the dash over too.

I have seen the front AND rear ends of a VY attached to a VT. They share the same chassis so it all fits. Although the rear is a hell of alot of work.

Front is a bolt on job.

PAT711
Post #5

the front you need bonnet, bumper ,guards, lights and all the plastic stuff up around the top of the bonnet, The interiors are pretty similar but like it was said before you gotta do the whole lot otherwise it looks pretty shotty, or you could just buy a vy???

John.
Post #6

Its all bolt in except for the rear, Interior, Front, Doors, Etc, Etc. Rear isn't thought.

mAttS hSvS
Post #7

QUOTE(PAT711 @ Jul 13 2008, 08:07 PM) [snapback]1282603094[/snapback]

the front you need bonnet, bumper ,guards, lights and all the plastic stuff up around the top of the bonnet, The interiors are pretty similar but like it was said before you gotta do the whole lot otherwise it looks pretty shotty, or you could just buy a vy???


i could just buy a vy yes lol but been thinking about it over the night and i wouldnt bother with doing front/back and full interior but i need new seats so going to do the seats mainly because i like the vy seats better.so with wiring up for the electric part is that just clip in? also need new front bar and bonnet as i have a minor dint in my bonnet and front bar needs a respray so might just stick with standard vt and go clubsport kit or something still not 100% sure on that front.

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Forgotten your password?
  • Login with Facebook

    Login using your Facebook account!

THIS TOPIC HAS BEEN ARCHIVED
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
Loading...
x