![]() |
tasride
Post #596
QUOTE(snowy stuntz @ Apr 30 2008, 11:18 AM) [snapback]1282267052[/snapback] +1 with troubles on any 2000 model onwards mx bike! rmz's/kxf (same motor) are really bad at the moment closely followed by yzf and crf if you wanted a full on mx'er id get a 2001 yzf 426 there the best of the pick in my opinion but they still have a few valve issues otherwise get a drz, would be the perfect bike with a long range tank for places like dans hill reserve! just my 2 cents... ![]() ![]() Early Kxf's were defnately not the best, Kawasaki took while to iron out the creases, but improvements have been made and 2005/06(could be wrong year) released a decent package. Kawasaki man through and through. Stop playing in those puddles Shaun! |
---|
![]() |
snowy stuntz
Post #597
QUOTE(tasride @ Apr 30 2008, 05:05 PM) [snapback]1282268681[/snapback] Early Kxf's were defnately not the best, Kawasaki took while to iron out the creases, but improvements have been made and 2005/06(could be wrong year) released a decent package. Kawasaki man through and through. Stop playing in those puddles Shaun! there still pretty bad latest model ive worked on so far is the 06 they still seem pretty bad for pulling the titanium valves i have seen them that badly pulled you could shave with them they end up that sharp on the valve margin, there just to soft more so the inlets than exhaust valves... normally you get exhaust valves pull on an engine with high combustion temps especially gas vehicles, but i think it might have more to do with valve spring tensions in the kxf/rmz motor, only thing that seems to stop the valves pulling on the seats is swapping them for stainless valves as there harder.... o.t= crutches and busted legs they give me the shits cant wait till i can operate a motor vehicle again so freakin bored!!!! :headwall: |
---|
![]() |
snowy stuntz
Post #601
QUOTE(nichy @ May 1 2008, 12:48 AM) [snapback]1282270728[/snapback] what happend snowy? fall of the bike or ??? ![]() broken tib fib and 24 stitches ![]() |
---|
![]() |
Dj KoniX
Post #603
QUOTE(snowy stuntz @ May 1 2008, 12:12 PM) [snapback]1282271237[/snapback] ![]() broken tib fib and 24 stitches bloody stupid frenchie ![]() i have ANOTHER bitch...i cant believe it ![]() So i drowned the bike last week, first thing monday morning i took my bike into a bike shop (name withheld) and they were like "Yeah man, wicked! bring it in" the usual good service... Went to check on progress thursday cos i was getting extra work done to it, i get there and nothing had been done to it. The mechanic said "Your bike isnt a genuine ******" i said "of course it isnt" and he said i cant bring it in there for servicing anymore cos its not genuine and he didnt notice the last 3 or 4 services..... I was fuming at this stage, felt like pointing out the motivational sign they have in the workshop that says: "Your not doing the customer a favour, they are doing you a favour of bringing their business to you" grrr, not many places i can take my bike as its not a full size ![]() Feel like starting a similar business and destroying theirs ![]() my rant over ![]() |
---|
![]() |
frenchie
Post #604
QUOTE(bce666 @ Apr 30 2008, 09:21 AM) [snapback]1282266673[/snapback] ive got a 07 crf450 and they have the best rep of any of the mx 4 bangers read a fucking book for once lol ![]() be a man get a crf Yea not really. QUOTE(snowy stuntz @ Apr 30 2008, 11:18 AM) [snapback]1282267052[/snapback] +1 with troubles on any 2000 model onwards mx bike! rmz's/kxf (same motor) are really bad at the moment closely followed by yzf and crf if you wanted a full on mx'er id get a 2001 yzf 426 there the best of the pick in my opinion but they still have a few valve issues otherwise get a drz, would be the perfect bike with a long range tank for places like dans hill reserve! just my 2 cents... ![]() ![]() ![]() QUOTE(snowy stuntz @ Apr 30 2008, 06:33 PM) [snapback]1282269110[/snapback] there still pretty bad latest model ive worked on so far is the 06 they still seem pretty bad for pulling the titanium valves i have seen them that badly pulled you could shave with them they end up that sharp on the valve margin, there just to soft more so the inlets than exhaust valves... normally you get exhaust valves pull on an engine with high combustion temps especially gas vehicles, but i think it might have more to do with valve spring tensions in the kxf/rmz motor, only thing that seems to stop the valves pulling on the seats is swapping them for stainless valves as there harder.... o.t= crutches and busted legs they give me the shits cant wait till i can operate a motor vehicle again so freakin bored!!!! :headwall: Crutches suck ass. I feel your pain mate, SO glad i can walk again. |
---|
![]() |
SuKDat_510
Post #605
QUOTE(Dj KoniX @ May 2 2008, 10:45 AM) [snapback]1282275268[/snapback] Feel like starting a similar business and destroying theirs ![]() my rant over ![]() I've thought that for some time now. Bloody arrogant upthemselves assholes IMO hahahaha. Lonnies a small town and if they start playing games like that they won't last long. Mind you the other "small bike shop" isn't much better ![]() Only service genuine bike......pfffffttttt!! Do they think they're royalty or sumfin ![]() |
---|
![]() |
snowy stuntz
Post #606
QUOTE(SuKDat_510 @ May 2 2008, 11:50 AM) [snapback]1282275582[/snapback] I've thought that for some time now. Bloody arrogant upthemselves assholes IMO hahahaha. Lonnies a small town and if they start playing games like that they won't last long. Mind you the other "small bike shop" isn't much better ![]() Only service genuine bike......pfffffttttt!! Do they think they're royalty or sumfin ![]() dooooo it!!!! ![]() ![]() ![]() |
---|
![]() |
StreetSleeper
Post #621
BITCH: Fuckheads with no ability to communicate their problems with you in person and instead go keying your car because they dont like where you park it. KENTS... |
---|
![]() |
billyboy
Post #622
QUOTE(Dj KoniX @ May 4 2008, 11:34 PM) [snapback]1282285909[/snapback] i just like getting pissed, walking round the streets smashed off your head then stealing a car and driving drunk..just one of those things u cant do in real life ![]() alot of fucks seem to be modelling real life around this in hobart lately... |
---|
![]() |
Mookie
Post #623
What the hell is with all the drama on boost ? |
---|
![]() |
G0_NADS_G0
Post #625
or purposely go around looking for items in the wrong section and correct them...aaaanyway bitch fo today is lazyness |
---|
![]() |
Felix_TRX
Post #628
My bitch for the day. Only talking with a mate the other night about getting my hands on a Bluebird, strip it down and turn it into a cheap little track/motokarna weapon. |
---|
![]() |
grandmasterb
Post #629
QUOTE(Mookie @ May 5 2008, 03:41 PM) [snapback]1282287946[/snapback] What the hell is with all the drama on boost ? its gone to shit ! does anybody actually have a boostcruising sticker on their car ? Here's what pretty much every new member in the last 6 months has done. Join boost make ppl think u own cars you dont tire kick make posts like "sweet ride" "good luck with the sale" or ask questions in forsale threads about cars your never going to buy. mouth a bit at ppl make you feel tough tire kick some more make false claims. whats the next ? get your sister pregnant or something ??? muppets ![]() |
---|
If you have a BoostCruising account enter your user name and password into the yellow box.
Alternatively, you can quickly login with Facebook.
If you don't have an account create one below.
Create AccountLogin using your Facebook account!