#1
Post ![]() |
|
---|---|
I was reading about how the 57ARE ute got stolen by F*&^ stains and that it had an imobilser and alarm. I know i would carstrate anyone you dare touch my car let alone steal it. If they can get past alarms and imobilisers then what can you do to insure your car cant get pinched. Maybe someone with extensive knowledge on car security could put a sticky post up with the mods blessing. PS: sorry again to hear about your car This post has been edited by vk_of_death: Sep 16 2004, 01:39 AM -------------------- All you keyboard warriors are just pissed off that the bully used to take your chicken sundwich from you at school..
And yes i am aware i dont know how to use full stops commas or proper grammer. Monaro getting turboed 2nd time lucky for the v8 turbo recipe |
![]() |
Sovereign V12
Post #2
If they really desperately want to pinch the car they will all you can do is try to slow them down as much as possible. A simple thing to suggest if driving an auto is to leave the selector in D |
---|
![]() |
SkiDMaN
Post #3
run a master battery kill switch and take the key and have the alarm/imobiliser on a different circuit? |
---|
![]() |
4X4 Monkey
Post #4
If u have the Know how on how to bypass all those alrms would u give our ur secrest |
---|
![]() |
chonna
Post #9
ok ive always thought bout gettin a pice of say 20mm thick steel pipe. welding four smaller bit onto each about 100mm long, so that you can slip anpther thick pipe over all 3 pedals in a manual car. you then have a couple of padlocks and make them pretty hefty ones. hopefully u can understand wat im gettin at. if u do ull see it may work. it would be time consuming but we all put steering wheel locks on dont we?? |
---|
![]() |
trd_rolla
Post #11
^^^ Hehe. Pedal Lock |
---|
![]() |
MGB
Post #15
on the MG i have a clutch lock, which basically looks like a steering wheel lock but it made of much stronger materials, a big fuck off padlock and a two hook type things one which goes around the clutch and holds it up and is attached at the other end to the steering wheel. |
---|
![]() |
deva
Post #16
no, they aren't like all pedalls joint together, there is one big piece of metal that sticks under your accelerator... then goes down to the floor... |
---|
![]() |
jimbo
Post #18
i had an idea the other day, prolly stupid and impossible but hey it could work. |
---|
![]() |
MIT20
Post #20
i've got a sensor switch (touch of finger activates it) on my car... it bypasses the ignition coil and therefore without knowing where the switch is you can't start it.. when i say switch i am talkin about a lil screw that acts as a sensor.. works a treat and no one knows where it is.. you just put a finger on the screw and turn the ignition..it starts.. no finger on screw and turn the ignition and you get nuthing...good fun when u bet sumone 20 bucks that they cant start ur car in 3 goes... |
---|
![]() |
VS Style
Post #23
my granddad (big john) actually uses the metal bar idea, except he attached a plate (dont ask how) to the floor of the car under the drivers seat and then a bar extends to the peddals and locks both together (solid steel bar 20mm thick) and then he chains the peddles together. |
---|
![]() |
Silvia_Xtreme
Post #26
Ive heard of cars being towed.. |
---|
![]() |
DreamensioN
Post #27
One idea I had was if....say you have an aftermarket engine management system and you had the ability to hook up a laptop to it - how hard would it be to make a program that would dump out all the maps to the laptop so the ECU wouldn't be able to start the car. It sounds good in theory, but in practise it would be a hassle. |
---|
![]() |
_Insane089_
Post #28
do you guys know you can get finger print starter thingys? i dont know the full details on it but if it aint your fingerprint then the car wont start, someone should look into it, i saw one for sale on ebay for a couple hundred dollors |
---|
![]() |
DreamensioN
Post #29
Yep - a biometrics reader to start the car. I believe there was one in the Toyota Concept car at BAS. You can buy biometric readers fairly cheaply now. The hard bit will be in working out the circuitry to hook it up to the ignition/alarm/immobiliser and making it secure. |
---|
![]() |
LAID courier
Post #30
yeh fuel pump is a good idea, but still, thses days just an alarm and immobiliser isnt good enough, somehtin real mad needs to be thought of, but while we are all here discussin ideas, the farkwit car stealers are laughin at us and reading all our fool proof ideas. |
---|
![]() |
LAID courier
Post #31
or just insure your shitbox for a shitload, leav it on the street with the windows down or some shit, then hope it gets stolen and reap the rewards hahahahaha. |
---|
![]() |
Silvia_Xtreme
Post #32
You can have all the different keys/fingerprint readers/keypads in the world.. it doesnt help when all thats behind that is a few wires... how easy would it be to bypass an immobiliser/keypad/fingerprint scanner???? |
---|
![]() |
this combined with a fuel pump and INJECTOR pulse cut, for EFI cars works the best. other than that..........they will just put the car on a tow truck and strip it else where. nothing will stop them. |
---|
![]() |
LAID courier
Post #35
haah bike chain, chain it to a bike rack in your driveway, it wont go anywhere |
---|
If you have a BoostCruising account enter your user name and password into the yellow box.
Alternatively, you can quickly login with Facebook.
If you don't have an account create one below.
Create AccountLogin using your Facebook account!