Making A Grounding Killswitch - Read  

*Tricky*
  • *Tricky*
  • A turkey is a bad man.
  • Member No.: 127,821
  • Joined: 14-July 08
  • Posts: 1,143
  • From: Mum's Vagina.
Post #1 post 31st January 2012 - 04:14 AM
Hey all,

A car I'd looked into awhile had a killswitch in it where by you'd put your finger on a screw (to ground) then you could start your car.

Now i'm just wondering is it as simple as connecting ground wire from starter to an inconspicious screw then bob's your uncle? or is there more to it.

Cheers.

--------------------
penis removed, too large
1200datto
Post #2

I don't really know shit about electrics but i'll have a crack at it anyway. If you run an earth wire to a screw, that I presume would be attached to the car, it would aready be grounded and touching it with your finger would have no effect. However if your considering having this wire attached to a screw that is floating in the air (I don't understand the point of having a screw but i'll play :S) could potentially be earthed by touching it to the body of the car or with your finger.

As mentioned above I don't have much of an understanding of electrics and thought that should be clarified before asking if the starter would even have an earth wire running off of it? I would have thought that since the starter is mounted to the engine and the engine to the chassis/subframe, wouldn't this already be earthed?

clucky-7
Post #3

off the top of my head, i would think that grabbing hold of the ground from the starter could give you a fair wack

Audio Express
Post #4

QUOTE (*Tricky* @ Jan 31 2012, 10:14 PM) *
Hey all,

A car I'd looked into awhile had a killswitch in it where by you'd put your finger on a screw (to ground) then you could start your car.

Now i'm just wondering is it as simple as connecting ground wire from starter to an inconspicious screw then bob's your uncle? or is there more to it.

Cheers.

more to it than that. those are capacitive immobilisers. if you are looking at that idea use a cig lighter,relay and a diode.. (and no I will not tell you how to set it up. google it.)

the_random_hero
Post #5

QUOTE (1200datto @ Feb 1 2012, 08:52 AM) *
I don't really know shit about electrics but i'll have a crack at it anyway. If you run an earth wire to a screw, that I presume would be attached to the car, it would aready be grounded and touching it with your finger would have no effect. However if your considering having this wire attached to a screw that is floating in the air (I don't understand the point of having a screw but i'll play :S) could potentially be earthed by touching it to the body of the car or with your finger.

As mentioned above I don't have much of an understanding of electrics and thought that should be clarified before asking if the starter would even have an earth wire running off of it? I would have thought that since the starter is mounted to the engine and the engine to the chassis/subframe, wouldn't this already be earthed?


Starter is earthed directly to the block, which will generally have at least one earth feed going back to the chassis or directly to the negative terminal of the battery (which also is a good wire to upgrade to reduce voltage drop to your starter motor).
There is a -lot- more wizardry involved than earthing the starter.

TwinCam16
Post #6

oh dear GOD!

NO!

The way those immobilisers work (extending on what Chris said) is they cut the feed to the started solenoid in the same sense a typical immobiliser would.

Rather than an alarm triggering the relay to cut the circuit, it uses a capacitance circuit to trigger a very low resistance trigger.

At no time does 12v or anything remotely along those lines travel along your finger laugh.gif

*Tricky*
Post #7

Sweet.

Have my answer, thanks BoostFags tongue.gif

brocks13
Post #8

QUOTE (*Tricky* @ Feb 9 2012, 02:46 PM) *
Sweet.

Have my answer, thanks BoostFags tongue.gif


Id run a relay with bat+ to 30, 87 to start, 86 to ign and 85 to bat- via some kind of micro switch under the carpet. :-)

THE STIG
Post #9

What your talking about I Think is called 'AEON' security system. It needs like 0.0whatever of a volt which travels from the key to the said screw through your body. If your not touching the screw then no start.

aaron.
Post #10

Simple capacitance switch circuit, you can charge people anything you like if they don't know how it works!

Considering making one of these after reading this thread, seems like a top idea.

aaron.

Audio Express
Post #11

QUOTE (aaron. @ Mar 17 2012, 11:09 PM) *
Simple capacitance switch circuit, you can charge people anything you like if they don't know how it works!

Considering making one of these after reading this thread, seems like a top idea.

aaron.


you understand the concept - you get a star smile.gif

Tonya1976
Post #12

QUOTE (Audio Express @ Mar 19 2012, 08:33 PM) *
you understand the concept - you get a star smile.gif

Don't do it! I currently have one of these touch screw immobilisers in my car and it is the biggest nightmare i have ever had. I am trying to currently find the stupid wires to remove it and put a better immobiliser in. These screw immobilisers short out and cause other issues with other electrics in your car. They suck.

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Login with Facebook

    Login using your Facebook account!

1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
Loading...
x