Back

 Euro Car Cruise - wednesday night  

Page 4 of 5
Jump to page
Post Topic
606gti
Post #106

QUOTE (Bwen @ Oct 31 2009, 02:58 PM) *
I got the Defi with the OSIR pod, looks pretty good, the blue actually matches the dash alot better than the pictures show. I went for PSI because I'm a bit used to the readings even though people in aust use BAR




So I got my antilift kit installed and ready for some cruising tongue.gif


they're nice but this one is perfect

http://www.eurospeed.net.au/index.php?main...;products_id=27

still axle tramps with the lift kit?


 
shinygti
Post #107

yeah i am getting the osir vent insert its on the way and got psi aswell since i am more familiar with it lol how much was the anti lift kit installed ?

606gti
Post #108

QUOTE (shinygti @ Nov 1 2009, 12:18 AM) *
yeah i am getting the osir vent insert its on the way and got psi aswell since i am more familiar with it lol how much was the anti lift kit installed ?


did it myself man, with a broken right hand. So its easy as. Cant imagine it costing more than a 100 in labour.

Bwen
Post #109

QUOTE (606gti @ Oct 31 2009, 10:23 PM) *
they're nice but this one is perfect

http://www.eurospeed.net.au/index.php?main...;products_id=27

still axle tramps with the lift kit?


alk helped heaps, pirellis come out of the box with pretty bad axle tramping so yeah it's cut it back quite a bit. Do you have the torque arm insert? I might make sure I worry about traction problems before I chase bigger numbers smile.gif

606gti
Post #110

QUOTE (Bwen @ Nov 1 2009, 08:44 AM) *
alk helped heaps, pirellis come out of the box with pretty bad axle tramping so yeah it's cut it back quite a bit. Do you have the torque arm insert? I might make sure I worry about traction problems before I chase bigger numbers smile.gif


yeah got the insert too.. other ppl swear by it but i dont think it did much besides add more vibration.

clutch-monkey
Post #111

is this on this week?

CALIbrated
Post #112

if it is, i might bring the Audi or the Calibra out, pending work schedule.

clutch-monkey
Post #113

QUOTE (CALIbrated @ Nov 2 2009, 01:52 PM) *
if it is, i might bring the Audi or the Calibra out, pending work schedule.

do it +1
not seen much euro activity since the last euro cruise to natural bridge.

CALIbrated
Post #114

QUOTE (clutch-monkey @ Nov 2 2009, 01:54 PM) *
do it +1
not seen much euro activity since the last euro cruise to natural bridge.

there was quite a big OpelAus cruise on yesterday, but i was working sad.gif

BlownBMW
Post #115

if its on again, ill be out this time smile.gif

E30_luv
Post #116

Well thats 4 of us that all went on the last natural bridge cruise that wanna go out again tongue.gif, hopefully its on this week!

lil_bobby_260
Post #117

QUOTE (BlownBMW @ Nov 2 2009, 03:04 PM) *
if its on again, ill be out this time smile.gif


Yeah ill be bringing the E30 out - only a couple more meets in it before it gets M30'd into a 335i.

83_SUS
Post #118

i rekon same time at the wheel this week im keen smile.gif

TMZ_535is
Post #119

QUOTE (E30_luv @ Nov 2 2009, 04:00 PM) *
Well thats 4 of us that all went on the last natural bridge cruise that wanna go out again tongue.gif, hopefully its on this week!


5 if I feel upto it and its on, might just meet at the wheel this time if the first meets all the way over at nudgee again.

M.A.D
Post #120

I might be keen for this depending on if I have finished some stuff.

ovadse
Post #121

i would go but i dont want a drive to turn into a un-lead race lol

+ the journey was anoying

+ i dont trust my car at the moment

+ i went through 3/4 of a tank of fuel the other night

+++ um..... no thats it smile.gif

oldschoolxy
Post #122

count me in too, why cant we organise our own meet and greet then go from there?

TMZ_535is
Post #123

QUOTE (oldschoolxy @ Nov 2 2009, 09:19 PM) *
count me in too, why cant we organise our own meet and greet then go from there?


Not a bad point lol, ideas anyone? Ill go ahead and suggest milton maccas as a meeting point as its close to the city, most people know it

clutch-monkey
Post #124

QUOTE (TMZ_535is @ Nov 2 2009, 09:22 PM) *
Not a bad point lol, ideas anyone? Ill go ahead and suggest milton maccas as a meeting point as its close to the city, most people know it

lol i was gonna say meet at southbank wheel haha

oldschoolxy
Post #125

and the e30 should be getting dropped tomorrow night even more wink.gif

oldschoolxy
Post #126

milton is easy for me coming from ipswich
BlownBMW
Post #127

yeh ill be hungry, so maybe milton maccas, and then to the wheel tongue.gif

TMZ_535is
Post #128

Reason why i didnt suggest the ferris wheel clutch is I was under the assumption that its the destination? I wouldnt mind a bit of a cruise during the night myself, I get bored with sitting around and chatting in a carpark after a while lol

oldschoolxy
Post #129

maccas sounds good

its an option so make a time at milton for people wanting to go on a bit of a drive and then set a time or a rough time at the wheel if they dont wanna go for a drive
clutch-monkey
Post #130

QUOTE (TMZ_535is @ Nov 2 2009, 09:48 PM) *
Reason why i didnt suggest the ferris wheel clutch is I was under the assumption that its the destination? I wouldnt mind a bit of a cruise during the night myself, I get bored with sitting around and chatting in a carpark after a while lol

fair enough, sounds good thumbsup.gif

BlownBMW
Post #131

Milton maccas:
arrive- 7:00pm
depart- 7:45pm


Southbank Wheel:
arrive- 8:00pm
depart- Whenever, or can decide if we want to crusie from here to a different place smile.gif


ohh and is this for wednsday night? lol

lil_bobby_260
Post #132

Needs new thread or people wont even look in here thinking we're all just talking about the last cruise.
Anyone else coming from northside?
I for one wouldnt mind a bit of a drive - if we're gonna be in milton why not cruise up to the summit or something?

wolfman101
Post #133

This is still a go for Wednesday?
I'll be in.
Now the question is whether to bring the '6 or the Brabus...
hsdance.gif

Bwen
Post #134

I might head out to have a looksies, I'm probably putting my car in the workshop sometime this week though so I might be boring and stay home and study for exams. We'll see how it all pans out smile.gif

wolfman101
Post #135

I really wanna have a look at the Pirelli, so DO IT.
Also, I guess I'll take the Brabby, because spending the whole night explaining the '6 IS in fact Euro can get tiresome.
:S

aljet
Post #136

Saweeeeeet.. I'll be there biggrin.gif

E30_luv
Post #137

Is anyone wanting to meet up and cruise from the southside over to milton? Clutch or Blown?, Could meet at springwood maccas or Capalaba maccas and head from there.

CALIbrated
Post #138

i'll be there. now should i bring the audi or the cali?

clutch-monkey
Post #139

QUOTE (E30_luv @ Nov 3 2009, 05:58 AM) *
Is anyone wanting to meet up and cruise from the southside over to milton? Clutch or Blown?, Could meet at springwood maccas or Capalaba maccas and head from there.

not sure, if there's only three of us maybe just cruise right in individually? you're in the redlands yeah, if you have to follow mt cotton rd onto mt gravatt-capalaba you run straight past my house anyway biggrin.gif

QUOTE (CALIbrated @ Nov 3 2009, 06:55 AM) *
i'll be there. now should i bring the audi or the cali?

cali. i won't recognise the audi tongue.gif

mx6 guy
Post #140

awesome! i should be there... it's great to see how many euro guys are coming out of there shells now thumbsup.gif
i want to get all the VW's (GTI's,pirelli's,R32's,Jetta's) and get a good photo. thumbsup.gif

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Forgotten your password?
  • Login with Facebook

    Login using your Facebook account!

Page 4 of 5
Jump to page
THIS TOPIC HAS BEEN ARCHIVED
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
Loading...
x