Mitsubishi Triton And Radio Wiring - Radio Harness removed from wiring loom  

Budget cheap as I already have most everything maybe $20 for a harness

VIN JMFMF3M27JJoo144o Jan 89

It has extensive wiring problems which I have worked through successfully.

The radio harness has been cut out of the wiring loom.

I need a wiring diagram for this vehicle.

I have a mitsubishi radio from the era. MB649827 AR-4325 3410107

Need the pinouts for this

The vehicle appears to have common neg speaker grounds.With 1 wire in the loom blue/white which give 6 volts all the time,
when acc or run it gives 12 volts.


These are the wires that work and what they appear to do White/Blue L/F
Black/Blue L/F Black/Red R/F and of course the 1 blue/white which powers 6v/12v

1
- -- o- o-------o-------o--o-
|__|__|__|__|__|__|__|__|
------------------------------------Representation MB649827 Mitsubishi Radio
---------o--o-----------o---o------Pinout block rear of radio (o=Pins)
|__|__|__|__|__|__|__|__|


My interpretation starting at left top pin 1 through to 2nd line last pin 16

6v/12v wire operates radio pin 8 think pin 2 is ant Red/Black R/F Pin 13
Black/Blue pin 5 White/Blue L/F pin 3


The radio goes but does not turn off until ign off.

1 Blue/white to the gigarette lighter 2 green/white Illumination

1 black wire left over in the wiring loom. When the lights go on it shows 9 volts

I cannot find the constant wire 12v+Red/Black So ihave built 1 off the loom.

I don't have any other clues.


I have had the vehicle ruinning, after rewiring the coil etc replacing subfuseable links

Everything is going now. Except lic plate and 1 parklight and the instrument night light.

Thank-you

This post has been edited by 88Triton: Mar 28 2012, 05:57 AM