Login- Download PDF Manual
-
439
3-5. Other interior features
Inside the front console box (12 V)
Pull the knob up to release the lock. Lift the lid.
Back of the front console box (12 V)*1
*1: Vehicles without rear seat entertainment system
440
3-5. Other interior features
Back of the front console box (120 V AC)*2
Power outlet socket
Luggage compartment (12 V)
*2: Vehicles with rear seat entertainment system
■The power outlet can be used when
12 V The engine switch is in the ACC or ON position. 120 V AC The engine switch is in the ON position.
441
3-5. Other interior features
CAUTION
■Using a power outlet
Observe the following precautions to reduce the risk of injury. ●Use of the power outlet when it is wet with drinks or snow may result in electrical shocks and is extremely dangerous. The power outlet must be thoroughly dried before use.
●Do not allow children to use or play with the power outlet. ●Be careful not to get any part of your body caught in the power outlet lid. ●When using electrical appliances, strictly follow any cautions and notices
written on their labels and in the manufacturers’ instruction manuals.
●Do not modify, disassemble or repair the power outlet or its inverter, in any way. Doing so may result in unexpected malfunctions or accidents, which could cause serious damage or injuries. Contact a Toyota dealer for any necessary repairs.
■To prevent injuries and accidents, securely fix all electric appliances before use and do not use any appliances that may do any of the fol- lowing: ●Distract the driver while driving, or hamper safe driving. ●Result in a fire or burn injuries due to the appliance rolling, falling or over-
heating while driving.
●Emit steam, while the windows of the cabin are closed.
■To prevent unexpected accidents, such as electric shocks, do not per-
form any of the following. ●Using the power outlet for electric heaters while sleeping. ●Contaminating the power outlet with liquid substances or mud. ●Handling electrical appliance plugs at the power outlet with wet hands or
feet.
●Inserting foreign objects into the power outlet. ●Using malfunctioning electric appliances. ●Inserting inappropriate or badly fitting plugs into the power outlet.
442
3-5. Other interior features
NOTICE
■To avoid damaging the power outlet and the plug
●Close the power outlet lid when not in use. ●Foreign objects or liquids that enter the power outlet may cause a short
circuit.
●Do not use plug adaptors to connect too many plugs to the power outlet. ●After inserting a plug, gently close the power outlet lid.
■To prevent the fuse from being blown
12 V Do not use an accessory that uses more than 12 V 10 A. 120 V AC Do not use a 120 V AC appliance that requires more than 100 W. If a 120 V AC appliance that consumes more than 100 W is used, the pro- tection circuit will cut the power supply.
■Appliances that may not operate properly (120 V AC)
The following 120 V AC appliances may not operate even if their power con- sumption is under 100 W. ●Appliances with high initial peak wattage ●Measuring devices that process precise data ●Other appliances that require an extremely stable power supply
■To prevent the battery from being discharged
Turn off all the vehicle’s electronic equipment and accessories, such as the headlights and air conditioning, when electrical appliances that consume in excess of 100 W are used continuously for long periods of time.
■To prevent any damage caused by heat
●Do not use any electrical appliances that give off intense heat such as toasters, in any locations including the internal or external trim, seats and deck.
●Do not use any electrical appliances, which are easily affected by vibration
or heat, inside the vehicle. Vibration while driving, or the heat of the sun while parking, may result in damage to those electrical appliances.
443
3-5. Other interior features
NOTICE
■If any electrical appliances are to be used while driving
Securely fasten both the appliances and their cables to prevent them from falling or getting caught any of the power train components.
■If the power outlet is loose when an electrical appliance plug is con-
nected Replace the outlet. Contact a Toyota dealer for any necessary replacements.
■If the power outlet gets dirty
Turn the main switch off and use a soft, clean cloth to wipe it gently. Do not use any cleansing materials, such as organic solvents, wax, or com- pound cleaners, as these may damage the power outlet or cause it to mal- function.
444
3-5. Other interior features Seat heaters
■ Front seat
On The indicator comes on. Adjusts the seat tempera- ture. The further you turn the dial upward, the warmer the seat becomes.
: If equipped 445
3-5. Other interior features
■ Rear seat (vehicles with rear console box)
Press the LO or HI switch to warm the seats to a low or high temperature respectively.
High temperature The indicator (yellow) comes on. Low temperature The indicator (green) comes on.
■The seat heaters can be used when
The engine switch is in the ON position.
■When not in use
Front seat: Turn the dial fully downward. The indicator turns off. Rear seat (vehicles with rear console box): Push lightly on the opposite side. The indicator turns off.
446
3-5. Other interior features
CAUTION
■Burns
●Use caution when seating the following persons in a seat with the seat
heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the disabled • Persons with sensitive skin • Persons who are fatigued • Persons who have taken alcohol or drugs that induce sleep (sleeping
drugs, cold remedies, etc.)
●Do not cover the seat with anything when using the seat heater.
Using the seat heater with a blanket or cushion increases the temperature of the seat and may lead to overheating.
NOTICE
■To prevent seat heater damage
Do not put unevenly weighted objects on the seat and do not stick sharp objects (needles, nails, etc.) into the seat.
■To prevent battery discharge
Turn the switches off when the engine is not running.
447
3-5. Other interior features Seat heaters and ventilators
Blows air from the seats The indicator comes on. The higher the number, the stron- ger the airflow becomes. Heats the seats The indicator comes on. The higher the number, the warmer the seats become.
■The seat heaters can be used when
The engine switch is in the ON position.
■When not in use
Set the dial to 0. The indicator turns off.
448
: If equipped
3-5. Other interior features
CAUTION
■Burns
●Use caution when seating the following persons in a seat with the seat
heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the disabled • Persons with sensitive skin • Persons who are fatigued • Persons who have taken alcohol or drugs that induce sleep (sleeping
drugs, cold remedies, etc.)
●Do not cover the seat with anything when using the seat heater.
Using the seat heater with a blanket or cushion increases the temperature of the seat and may lead to overheating.
NOTICE
■To prevent seat heater damage
Do not put unevenly weighted objects on the seat and do not stick sharp objects (needles, nails, etc.) into the seat.
■To prevent battery discharge
Turn the switches off when the engine is not running.
449
3-5. Other interior features Armrests
Separated seat
Bench seat
Adjusting to the desired angle: Lower the armrest from the highest position to the lowest position. Raise the armrest to the desired angle. Unlock the armrest: Lift the armrest to raise it to the highest position.
Pull the armrest down for use.
NOTICE
■To prevent damage to the armrest
●Do not place too much strain on the armrest. ●Do not sit on the armrest.
450
: If equipped
3-5. Other interior features Rear side sunshades
Rear door window
Pull the tab up. Hook the sunshade onto the anchors. To lower the sunshade, pull the tab slightly the to unhook shade, and lower it slowly.
: If equipped 451
3-5. Other interior features
Rear quarter window
Pull the tab up. Hook the sunshade onto the anchors. To lower the sunshade, pull the tab slightly to unhook the shade, and lower it slowly.
NOTICE
■To ensure normal operation of the sunshade
Observe the following precautions. ●Do not place anything where it may hinder the opening/closing of the sun-
shade.
●Do not place anything on the sunshade.
452
3-5. Other interior features Assist grips
An assist grip (type A) installed on the ceiling can be used to sup- port your body while sitting on the seat. An assist grip (type B) installed on the pillar can be used when get- ting in or out of the vehicle and others.
Assist grip (type A) Assist grip (type B)
CAUTION
■Assist grip (type A)
Do not use the assist grip (type A) when getting in or out of the vehicle or ris- ing from your seat.
NOTICE
■To prevent damage to the assist grip
Do not hang any heavy object or put a heavy load on the assist grip.
453
3-5. Other interior features Floor mat
Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet.
the
Insert retaining hooks (clips) into the floor mat eye- lets.
Turn the upper knob of each retaining hook (clip) to secure the floor mats in place. *: Always align the
marks.
The shape of the retaining hooks (clips) may differ from that shown in the illustration.
454
3-5. Other interior features
CAUTION
Observe the following precautions. Failure to do so may cause the driver’s floor mat to slip, possibly interfering with the pedals while driving. An unexpectedly high speed may result or it may become difficult to stop the vehicle, leading to a serious accident. ■When installing the driver’s floor mat
●Do not use floor mats designed for other models or different model year
vehicles, even if they are Toyota Genuine floor mats.
●Only use floor mats designed for the driver’s seat. ●Always install the floor mat securely using the retaining hooks (clips) pro-
vided.
●Do not use two or more floor mats on top of each other. ●Do not place the floor mat bottom-side up or upside-down.
■Before driving
●Check that the floor mat is securely fixed in the correct place with all the provided retaining hooks (clips). Be especially careful to perform this check after cleaning the floor.
●With the engine stopped and the shift lever in P, fully depress each pedal to the floor to make sure it does not inter- fere with the floor mat.
455
3-5. Other interior features Luggage compartment features
■ Tie-down hooks
Tie-down hooks are provided for securing loose items.
456
■ Cargo net hooks
3-5. Other interior features
To hang the cargo net, use the cargo net hooks.
The cargo net itself is not included as original equipment.
457
3-5. Other interior features
■ Shopping bag hooks
To hang shopping bags, use the shopping bag hooks.
458
3-5. Other interior features
■ Auxiliary boxes
Type A
Pull the lever upwards to lift the deck board.
Type B (if equipped)
Open the cover.
459
3-5. Other interior features
CAUTION
■When the tie-down hooks are not in use
To avoid injury, always return the tie-down hooks to their retracted positions when they are not in use.
■Caution while driving
Keep the auxiliary box closed. Injuries may result in the event of an accident or sudden braking.
460
3-5. Other interior features Garage door opener
The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, secu- rity systems, and other devices.
The garage door opener (HomeLink® Universal Transceiver) is manufac- tured under license from HomeLink®.
Programming the HomeLink® (for U.S.A. owners)
The HomeLink® compatible transceiver in your vehicle has 3 buttons which can be programmed to operate 3 different devices. Refer to the programming method below appropriate for the device.
Indicator Buttons
■ Programming the HomeLink
Point the remote control trans- mitter for the device 1 to 3 in. (25
to 75 mm) from the HomeLink® control buttons.the
indicator on
Keep the HomeLink® in view while pro- gramming.
: If equipped 461
3-5. Other interior features
Press and hold down one of the buttons on the HomeLink® and the button on the transmitter. When the HomeLink® changes from a slow to a rapid flash, you can release both buttons.
indicator on
the
If the HomeLink® indicator comes on but does not flash, or flashes rapidly for 2 seconds and remains the HomeLink® button is lit, the already programmed. Use other buttons or follow the “Reprogramming a HomeLink® button” instructions. (P. 464)
Test the operation of HomeLink® by pressing newly programmed button.
the the
the
hold
If programming a garage door opener, check to see if the garage door opens and closes. If the garage door does not operate, see if your garage transmitter is of the Rolling Code type. Press and programmed HomeLink® button. The garage door has the rolling code feature if the HomeLink®) flashes rapidly for 2
seconds and then remains lit. If your transmitter is the Rolling Code type, proceed to the head- ing “Programming a rolling code system”.indicator
(on
the
Repeat the steps above to program another device for each of the remaining HomeLink® buttons.
462
3-5. Other interior features
■ Programming a Rolling Code system (for U.S.A. owners)
If your device is Rolling Code equipped, follow the steps under the heading “Programming the HomeLink®” before proceeding with the steps listed below.
Locate the training button on the ceiling mounted garage door opener motor. The exact location and color of the button may vary by brand of garage door opener. Refer to the operation manual supplied with the garage door opener for the location of the training button. Press the training button. Following this step, you have 30 seconds in which to initiate step 3
below. Press and hold the vehicle’s programmed HomeLink® button for 2 seconds and release it. Repeat this step once again. The garage door may open. If the garage door opens, the programming process is complete. If the door does not open, press and release the button a third time. This third press and release will complete the programming process by opening the garage door. The ceiling mounted garage door opener motor should now recog- nize the HomeLink® transceiver and operate the garage door. Repeat the steps above to program another rolling code sys- tem for any of the remaining HomeLink® buttons.■ Programming an entry gate (for U.S.A. owners)/Programming
all devices in the Canadian market
Place your transmitter 1 to 3 in. (25 to 75 mm) away from the surface of the HomeLink®. Keep the indicator on the HomeLink® in view while programming. Press and hold the selected HomeLink® button. Repeatedly press and release (cycle) the device’s remote control button for two seconds each until step 4 is completed. When the indicator on the HomeLink® compatible transceiver start to flashing rapidly, release the buttons.
463
3-5. Other interior features
Test the operation of the HomeLink® by pressing the newly programmed button. Check to see if the gate/device operates correctly. Repeat the steps above to program another device for each of the remaining HomeLink® buttons.
■ Programming other devices
To program other devices such as home security systems, home door locks or lighting, contact your authorized Toyota dealer for assistance.
■ Reprogramming a button
The individual HomeLink® buttons cannot be erased but can be reprogrammed. To reprogram a button, follow the programming instructions.
Operating the HomeLink®
Press the appropriate HomeLink® button. The HomeLink® indicator on the HomeLink® transceiver should turn on.
The HomeLink® continues to send a signal for a maximum of 20 seconds as long as the button is pressed.
Reprogramming a HomeLink® button
Press and hold the desired HomeLink® button. After 20 seconds, the HomeLink® indicator light will start flashing slowly. Keep pressing the HomeLink® button and then follow the “Programming the HomeLink® (for U.S.A. owners)” instructions. (P. 461)
464
3-5. Other interior features
Erasing the entire HomeLink® memory (all three programs)
Press and hold down the 2 out- side buttons for 10 seconds until the indicator flashes.
If you sell your vehicle, be sure to erase the programs stored in the HomeLink® memory.
■Before programming
●Install a new battery in the remote control transmitter. ●The battery side of the remote control transmitter must be pointed away
from the HomeLink®.
■Certification for the garage door opener
For vehicles sold in the U.S.A. FCC ID: NZLWZLHL4
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any inter- ference received, including interference that may cause undesired opera- tion. FCC WARNING: Changes or modifications not expressly approved by the party responsi- ble for compliance could void the user’s authority to operate the equip- ment. For vehicles sold in Canada NOTE: This device complies with Industry Canada licence-exempt RSS stan- dard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.465
3-5. Other interior features
■When support is necessary
Visit on the web at www.homelink.com or call 1-800-355-3515.
CAUTION
■When programming a garage door or other remote control device
The garage door may operate, so ensure that people and objects are out of danger to prevent potential harm.
■Conforming to federal safety standards
Do not use the HomeLink® Compatible Transceiver with any garage door opener or device that lacks safety stop and reverse features as required by federal safety standards. This includes any garage door that cannot detect an obstruction object. A door or device without these features increases the risk of death or serious injury.
466
3-5. Other interior features Compass
The compass on the inside rear view mirror indicates the direction in which the vehicle is heading. ■ Operation
To turn the compass on or off, press the switch.
■ Displays and directions
Display
NE SE SW NW
Direction
North
Northeast
East
Southeast
South
Southwest
West
Northwest
: If equipped 467
3-5. Other interior features
Calibrating the compass
Samoa: 5 Guam: 8 Saipan: 8
The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of the vehicle.
If you cross over a map boundary shown in illustration, the compass will deviate. To obtain higher precision or accurate calibration, refer to the following.
468
3-5. Other interior features
■ Deviation calibration
Stop the vehicle where it is safe to drive in a circle.
Press the switch until a number (1 to 15) appears on the com- pass display.
Press the switch, and referring to the map above, select the number of the zone where you are. If the direction is displayed several seconds after adjustment, the calibration is complete.
■ Circling calibration
When “C” appears on the dis- play, drive the vehicle at 5 mph (8 km/h) or less in a circle until a direction is displayed.
If there is not enough space to drive in a circle, drive around the block until the direction is dis- played.
469
3-5. Other interior features
■Conditions unfavorable to correct operation
The compass may not show the correct direction in the following conditions: ●The vehicle is stopped immediately after turning. ●The vehicle is on an inclined surface. ●The vehicle is in a place where the earth’s magnetic field is subject to interference by artificial magnetic fields (underground car park/parking lot, under a steel tower, between buildings, roof car park/parking lot, near an intersection, near a large vehicle, etc.).
●The vehicle has become magnetized.
(There is a magnet or metal object near the inside rear view mirror.)
●The battery has been disconnected. ●A door is open.
CAUTION
■While driving the vehicle
Do not adjust the display. Be sure to adjust the display only when the vehicle is stopped.
■When doing the circling calibration
Be sure to secure a wide space, and watch out for people and vehicles in the neighborhood. Do not violate any local traffic rules while performing circling calibration.
NOTICE
■To avoid the compass malfunctions
Do not place magnets or any metal objects near the inside rear view mirror. Doing this may cause a malfunction of the compass sensor.
■To ensure normal operation of the compass
●Do not perform circling calibration of the compass in a place where the earth’s magnetic field is subject to interference by artificial magnetic fields. ●During calibration, do not operate electric systems (moon roof, power win-
dows, etc.) as they may interfere with the calibration.
470
Maintenance and care
4-1. Maintenance and care Cleaning and protecting the vehicle exterior......... 472
Cleaning and protecting the vehicle interior.......... 4744-2. Maintenance Maintenance requirements.................. 477
General maintenance....... 480
Emission inspection and maintenance (I/M) programs.......................... 4834-3. Do-it-yourself maintenance
Do-it-yourself service precautions .................... 484
Hood ................................ 488
Engine compartment........ 489
Tires ................................. 504
Tire inflation pressure ...... 511
Wheels ............................. 515
Air conditioning filter......... 518
Wireless remote control battery............................ 521
Checking and replacing fuses .............................. 523
Light bulbs........................ 535471
4-1. Maintenance and care Cleaning and protecting the vehicle exterior
Perform the following to protect the vehicle and maintain it in prime condition.
● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust. Wash the vehicle body using a sponge or soft cloth, such as a chamois.
● For hard-to-remove marks, use car wash soap and rinse thor-
oughly with water.
● Wipe away any water. ● Wax the vehicle when the waterproof coating deteriorates. If water does not bead on a clean surface, apply wax when the vehicle body is cool.
■Automatic car washes
●Fold the mirrors back before washing the vehicle. ●Brushes used in automatic car washes may scratch the vehicle surface
and harm your vehicle’s paint.
■High pressure car washes
Do not allow the nozzles of the car wash to come within close proximity of the windows. Before entering an automatic car wash, check that the fuel filler door on your vehicle is closed properly.
■Aluminum wheels
●Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or abrasive cleaners. Do not use strong or harsh chemical cleaners. Use the same mild detergent and wax as used on the paint.
●Do not use detergent on the wheels when they are hot, for example after
driving for long distance in the hot weather.
●Wash detergent from the wheels immediately after use.
472
4-1. Maintenance and care
■Bumpers and side moldings
Do not scrub with abrasive cleaners.
CAUTION
■Caution about the exhaust pipe
Exhaust gasses cause the exhaust pipe to become quite hot. When washing the vehicle, be careful not to touch the pipe until it has cooled sufficiently, as touching a hot exhaust pipe can cause burns.
■Precaution regarding the Blind Spot Monitor
If the paint of the rear bumper is chipped or scratched, the system may mal- function. If this occurs, consult your Toyota dealer.
NOTICE
■To prevent paint deterioration and corrosion on the body and compo-
nents (aluminum wheels etc.) ●Wash the vehicle immediately in the following cases:
• After driving near the sea coast • After driving on salted roads • If you see coal tar or tree sap on the paint surface • If you see dead insects, insect droppings or bird droppings on the paint • After driving in an area contaminated with soot, oily smoke, mine dust,
iron powder or chemical substances
• If the vehicle becomes heavily soiled in dust or mud • If liquids such as benzene and gasoline are spilled on the paint surface
●If the paint is chipped or scratched, have it repaired immediately. ●To prevent the wheels from corroding, remove any dirt and store in a place
with low humidity when storing the wheels.
■Cleaning the exterior lights
●Wash carefully. Do not use organic substances or scrub with a hard brush.
This may damage the surfaces of the lights.
●Do not apply wax on the surfaces of the lights.
Wax may cause damage to the lenses.
473
4-1. Maintenance and care Cleaning and protecting the vehicle interior
The following procedures will help protect your vehicle’s interior and keep it in top condition: ■ Protecting the vehicle interior
Remove dirt and dust using a vacuum cleaner. Wipe dirty sur- faces with a cloth dampened with lukewarm water.
■ Cleaning the leather areas
● Remove dirt and dust using a vacuum cleaner. ● Wipe any excess dirt and dust with a soft cloth dampened with
diluted detergent. Use a diluted water solution of approximately 5% neutral wool deter- gent.
● Wring out any excess water from the cloth and thoroughly
wipe off all remaining traces of detergent.
● Wipe the surface with a dry, soft cloth to remove any remain- ing moisture. Allow the leather to dry in a shaded and venti- lated area.
■ Synthetic leather areas
● Remove loose dirt using a vacuum cleaner. ● Apply a mild soap solution to the synthetic leather using a
sponge or soft cloth.
● Allow the solution to soak in for a few minutes. Remove the
dirt and wipe off the solution with a clean, damp cloth.
474
4-1. Maintenance and care
■Caring for leather areas
Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior.
■Shampooing the carpets
There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam. Rub in overlapping circles. Do not apply water. Excellent results are obtained when keeping the carpet as dry as pos- sible.
■Seat belts
Clean with mild soap and lukewarm water using a cloth or sponge. Also check the belts periodically for excessive wear, fraying or cuts.
CAUTION
■Water in the vehicle
●Do not splash or spill liquid in the vehicle. Doing so may cause the electri-
cal components etc. to malfunction or catch fire.
●Do not get any of the SRS components or wiring in the vehicle interior wet.
(P. 112) Electrical malfunction may cause the airbags to deploy or not function properly, resulting in death or severe injury.
■Cleaning the interior (especially instrument panel)
Do not use polish wax or polish cleaner. The instrument panel may reflect off the windshield, obstructing the driver’s view and leading to an accident, resulting in death or serious injury.
475
4-1. Maintenance and care
NOTICE
■Cleaning detergents
●Do not use organic substances such as benzene or gasoline, acidic or alkaline solutions, dye, bleach or other detergent. Doing so may discolor the vehicle interior or cause streaks or damage to painted surfaces.
●Do not use polish wax or polish cleaner. The instrument panel’s or other
interior part’s painted surface may be damaged.
■Preventing damage to leather surfaces
Observe the following precautions to avoid damage to and deterioration of leather surfaces. ●Remove any dust or dirt on leather surfaces immediately. ●Do not expose the vehicle to direct sunlight for extended periods of time.
Park the vehicle in the shade, especially during summer.
●Do not place items made of vinyl or plastic, or that contain wax on the upholstery, as they may stick to the leather surface if the vehicle interior heats up significantly.
■Water on the floor
Do not wash the vehicle floor with water. Vehicle systems such as the audio system may be damaged if water comes into contact with electrical components under the floor of the vehicle, and may also cause the body to rust.
■Cleaning the inside of the back window and the rear quarter windows
●Do not use glass cleaner to clean the back window and the rear quarter windows, as this may cause damage to the rear window defogger heater wires or antennas. Use a cloth dampened with lukewarm water to gently wipe the window clean. Wipe the window in strokes running parallel to the heater wires.
●Be careful not to scratch or damage the heater wires or antennas.
476
4-2. Maintenance Maintenance requirements
To ensure safe and economical driving, day-to-day care and regular maintenance are essential. It is the owner’s responsibility to perform regular checks. Toyota recommends the following maintenance. ■ General maintenance
Should be performed on a daily basis. This can be done by your- self or by a Toyota dealer. ■ Scheduled maintenance
Should be performed at specified intervals according to the maintenance schedule. For details about maintenance items and schedules, refer to the “Scheduled Maintenance Guide” or “Owner’s Manual Supplement”.
■ Do-it-yourself maintenance
You can perform some maintenance procedures yourself. Please be aware that do-it-yourself maintenance may affect war- ranty coverage. The use of Toyota Repair Manuals is recommended. For details about warranty coverage, see the separate “Owner’s Warranty Information Booklet”, “Owner’s Manual Supplement”.
■Repair and replacement
It is recommended that genuine Toyota parts be used for repair to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than Toyota dealer performs repairs, confirm the war- ranty coverage. Flex-fuel vehicles: Flex-fuel vehicles use special parts made exclusively for flex-fuel vehicles. When servicing or repairing your vehicles, use genuine Toyota parts made exclusively for your flex-fuel vehicle.
477
4-2. Maintenance
■Resetting the maintenance required reminder light (vehicles without multi-information display) or the message indicating maintenance is required (vehicles with multi-information display) (U.S.A. only) After the required maintenance is performed according to the maintenance schedule, please reset the reminder light or message. To reset the data, follow the procedures described below:
Turn the engine switch off with the trip meter A reading shown. While pressing the trip meter reset button (P. 166), turn the engine switch on.
Without multi-information display
Continue to press and hold the button until the trip meter displays 000000.
With multi-information display
Continue to press and hold the button until “MAINT REQD RESET MODE COMPLETE” appears on the multi-information display.
■Allow inspection and repairs to be performed by a Toyota dealer
●Toyota technicians are well-trained specialists and are kept up to date with the latest service information. They are well informed about the operations of all systems on your vehicle.
●Keep a copy of the repair order. It proves that the maintenance that has been performed is under warranty coverage. If any problem should arise while your vehicle is under warranty, your Toyota dealer will promptly take care of it.
478
4-2. Maintenance
CAUTION
■Warning in handling of battery
●Engine exhaust, some of its constituents, and a wide variety of automobile components contain or emit chemicals known to the State of California to cause cancer and birth defects and other reproductive harm. Work in a well ventilated area.
●Oils, fuels and fluids contained in vehicles as well as waste produced by component wear contain or emit chemicals known to the State of Califor- nia to cause cancer and birth defects or other reproductive harm. Avoid exposure and wash any affected area immediately.
●Battery posts, terminals and related accessories contain lead and lead compounds which are known to cause brain damage. Wash your hands after handling. (P. 499)
479
4-2. Maintenance General maintenance
Listed below are the general maintenance items that should be per- formed at the intervals specified in the “Scheduled Maintenance Guide” or “Owner’s Manual Supplement”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice.
Engine compartment
Items
Battery Brake fluid Engine coolant Engine oil Exhaust system Power steering fluid
Radiator/condenser/hoses
Washer fluid
Check points
(P. 499) Maintenance-free. (P. 496) At the correct level? At the correct level? (P. 494) At the correct level? (P. 490) No fumes or strange sounds? At the correct level? (P. 498) Not blocked with foreign matter? (P. 496) At the correct level? (P. 502)
480
4-2. Maintenance
Vehicle interior
Items
Check points
Accelerator pedal
Automatic transmission “Park” mechanism
Brake pedal
Brakes
Head restraints
Indicators/buzzers
Lights
Parking brake
Seat belts
Seats
Steering wheel
• Moves smoothly (without uneven pedal effort or catching)? • Can the vehicle be held securely on an incline with the shift lever in P? • Moves smoothly? • Does it have appropriate clear- ance and correct amount of free play? • Not pull to one side when applied? • Loss of brake effectiveness? • Spongy feeling brake pedal? • Pedal almost touches floor? • Move smoothly and lock securely? • Function properly? • Do all the lights come on? • Headlights aimed correctly? • Moves smoothly? • Can hold the vehicle securely on an incline? • Does the seat belt system oper- ate smoothly? • Are the belts undamaged? • Do the seat controls operate properly? • Moves smoothly? • Has correct free play? • No strange noises?
481
4-2. Maintenance
Vehicle exterior
Items
Check points
Doors Engine hood
Fluid leaks
Tire
Windshield wipers/rear window wiper
• Operate smoothly? • The lock system works properly? • Is there any leakage after park- ing? • Inflation pressure is correct? • Tire surfaces not worn or dam- aged? • Tires rotated according to the maintenance schedule? • Wheel nuts are not loose? • The wiper blades should not show any signs of cracking, splitting, wear, contamination or deformation. • The wiper blades should clear the windshield/rear window without streaking or skipping.
CAUTION
■If the engine is running
Turn the engine off and ensure that there is adequate ventilation before per- forming maintenance checks.
482
4-2. Maintenance Emission inspection and maintenance (I/M) programs
Some states have vehicle emission inspection programs which include OBD (On Board Diagnostics) checks. The OBD system moni- tors the operation of the emission control system. ■ If the malfunction indicator lamp comes on
The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/ M test and may need to be repaired. Contact your Toyota dealer to service the vehicle.
■ Your vehicle may not pass the I/M test:
● When the battery is disconnected or discharged
Readiness codes that are set during ordinary driving are erased. Also, depending on your driving habits, the readiness codes may not be completely set.
● When the fuel tank cap is loose
The malfunction indicator lamp comes on as a temporary mal- function and your vehicle may not pass the I/M test.
■ When the malfunction indicator lamp goes off after several
driving trips The error code in the OBD system will not be cleared unless the vehicle is driven 40 or more times.
■ If your vehicle does not pass the I/M test
Contact your Toyota dealer to prepare the vehicle for re-testing.
483
4-3. Do-it-yourself maintenance Do-it-yourself service precautions
If you perform maintenance yourself, be sure to follow the correct procedures as given in these sections.
Items
Parts and tools
Battery condition
(P. 499)
Brake fluid level
(P. 496)
Engine coolant level
(P. 494)
Engine oil level
P. 490)
Fuses
(P. 523)
• Warm water • Baking soda • Grease • Conventional wrench (for terminal clamp bolts) • FMVSS No.116 DOT 3 or SAE J1703 brake fluid • Rag or paper towel • “Toyota Super Long Life Coolant” or similar high quality ethylene glycol based non-silicate, non- amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology. U.S.A.: “Toyota Super Long Life Coolant” is pre-mixed with 50% coolant and 50% deionized water. Canada: “Toyota Super Long Life Coolant” is pre-mixed with 55% coolant and 45% deionized water. • Toyota Genuine Motor Oil or equivalent • Rag or paper towel • Funnel (used only for adding oil) • Fuse with same amperage rating as original
484
4-3. Do-it-yourself maintenance
Items
Parts and tools
Light bulbs
(P. 535)
Power steering fluid level
(P. 498)
Radiator and condenser
(P. 496)
Tire inflation pressure (P. 511)
Washer fluid
(P. 502)
• Bulb with same number and watt- age rating as original • Phillips-head screwdriver • Flathead screwdriver • Automatic transmission fluid DEXRON® II or III • Rag or paper towel • Funnel (used only for adding power steering fluid)
• Tire pressure gauge • Compressed air source • Washer fluid containing antifreeze (for winter use) • Water • Funnel (used only for adding washer fluid)
485
4-3. Do-it-yourself maintenance
CAUTION
The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury observe the following precautions. ■When working on the engine compartment
●Keep hands, clothing, and tools away from the moving fan and engine
drive belt.
●Be careful not to touch the engine, radiator, exhaust manifold, etc. right
after driving as they may be hot. Oil and other fluids may also be hot.
●Do not leave anything that may burn easily, such as paper or rags, in the
engine compartment.
●Do not smoke, cause sparks or expose an open flame to fuel or the bat-
tery. Fuel and battery fumes are flammable.
●Be extremely cautious when working on the battery. It contains poisonous
and corrosive sulfuric acid.
●Take care because brake fluid can harm your hands or eyes and damage
painted surfaces. If fluid gets on your hands or in your eyes, flush the affected area with clean water immediately. If you still experience discomfort, see a doctor.
■When working near the cooling fans or radiator grille
Be sure the engine switch is in the LOCK position. With the engine switch on, the cooling fans may automatically start to run if the air conditioning is on and/or the coolant temperature is high.
■Safety glasses
Wear safety glasses to prevent flying or falling material, fluid spray, etc. from getting in the eyes.
486
4-3. Do-it-yourself maintenance
NOTICE
■If you remove the air cleaner
Driving with the air cleaner removed may cause excessive engine wear due to dirt in the air.
■If the brake fluid level is low or high
It is normal for the brake fluid level to go down slightly as the brake pads wear or when the brake fluid level in the accumulator is high. If the reservoir needs frequent refilling, it may indicate a serious problem.
487
4-3. Do-it-yourself maintenance Hood
Release the lock from the inside of the vehicle to open the hood.
Pull the hood lock release lever.
The hood will pop up slightly.
Pull up the hood catch lever and lift the hood.
CAUTION
■Pre-driving check
Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury.
488
4-3. Do-it-yourself maintenance Engine compartment
Washer fluid tank (P. 502) Engine oil level dipstick
(P. 490)
Engine coolant reservoir
(P. 494)
Engine oil filler cap
(P. 491)
Brake fluid reservoir
(P. 496) (P. 523) (P. 499) (P. 496)
Fuse box Battery Radiator Cooling fans Condenser (P. 496) Power steering fluid reservoir (P. 498)
489
4-3. Do-it-yourself maintenance
Engine oil
With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil
Park the vehicle on level ground. After turning off the engine, wait more than 5 minutes for the oil to drain back into the bot- tom of the engine.
Hold a rag under the end and pull the dipstick out.
Wipe the dipstick clean. Reinsert the dipstick fully.
Holding a rag under the end, pull the dipstick out and check the oil level. Low Normal Excessive
The shape of the dipstick may differ depending on the type of vehicle or engine.
Wipe the dipstick and reinsert it fully.
490
■ Adding engine oil
4-3. Do-it-yourself maintenance
If the oil level is below or near the low level mark, add engine oil of the same type as already in the engine.
Make sure to check the oil type and prepare the items needed before adding oil.
Engine oil selection P. 604
ItemsClean funnel
Remove the oil filler cap, turning it counterclockwise. Add engine oil slowly. Checking the dipstick. Reinstall the filler cap, turning it clockwise.
The approximate quantity of oil needed to raise the level between low and full on the dipstick is indicated as follows: 1.6 qt. (1.5 L, 1.3 lmp.qt.)
491
4-3. Do-it-yourself maintenance
■Engine oil consumption
A certain amount of engine oil will be consumed while driving. In the follow- ing situations, oil consumption may increase, and engine oil may need to be refilled in between oil maintenance intervals. ●When the engine is new, for example directly after purchasing the vehicle
or after replacing the engine
●If low quality oil or oil of an inappropriate viscosity is used ●When driving at high engine speeds or with a heavy load, when towing,
or when driving while accelerating or decelerating frequently
●When leaving the engine idling for a long time, or when driving frequently
through heavy traffic
492
4-3. Do-it-yourself maintenance
CAUTION
■Used engine oil
●Used engine oil contains potentially harmful contaminants which may cause skin disorders such as inflammation or skin cancer, so care should be taken to avoid prolonged and repeated contact. To remove used engine oil from your skin, wash thoroughly with soap and water.
●Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal.
●Do not leave used engine oil within the reach of children.
NOTICE
■To prevent serious engine damage Check the oil level on a regular basis.
■When replacing the engine oil
●Be careful not to spill engine oil on the vehicle components. ●Avoid overfilling, as the engine could be damaged. ●Check the oil level on the dipstick every time you refill the vehicle. ●Be sure the engine oil filler cap is properly tightened.
493
4-3. Do-it-yourself maintenance
Engine coolant
The coolant level is satisfactory if it is between the FULL and LOW lines on the reservoir when the engine is cold.
Reservoir cap FULL LOW If the level is on or below the LOW line, add coolant up to the FULL line.
■If the coolant level drops within a short time after replenishing
Visually check the radiator, hoses, reservoir cap, radiator cap, drain cock and water pump. If you cannot find a leak, have your Toyota dealer pressure test the cap and check for leaks in the cooling system.
■Coolant selection
Only use “Toyota Super Long Life Coolant” or similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology. U.S.A.:“Toyota Super Long Life Coolant” is a mixture of 50% coolant and
50% deionized water. (Enabled: -31F [-35C])
Canada:“Toyota Super Long Life Coolant” is a mixture of 55% coolant and
45% deionized water. (Enabled: -44F [-42C])
For more details about engine coolant, contact your Toyota dealer.
494
4-3. Do-it-yourself maintenance
CAUTION
■When the engine is hot
Do not remove the radiator cap. The cooling system may be under pressure and may spray hot coolant if the cap is removed, causing serious injuries, such as burns.
NOTICE
■When adding engine coolant
Coolant is neither plain water nor straight antifreeze. The correct mixture of water and antifreeze must be used to provide proper lubrication, corrosion protection and cooling. Be sure to read the antifreeze or coolant label.
