Login- Download PDF Manual
-
1. “Phone” 2. “Phonebook” 3. “Delete contacts”
● Deleting another cellular phone’s phonebook
1. “Phone” 2. “Phonebook” 3. “Delete other PB”
● Setting call volume
1. “Phone” 2. “HF Sound Setting” 3. “Call Volume”
● Setting ringtone volume
1. “Phone” 2. “HF Sound Setting” 3. “Ringtone Volume”
● Setting ringtone
1. “Phone” 2. “HF Sound Setting” 3. “Ringtone”
● Transferring call histories
1. “Phone” 2. “Transfer Histories”
314
3-3. Using the Bluetooth® audio system
Adding a new phone number
Select “Add contacts” using
● Transferring all contacts from the cellular phone
Select “Overwrite all contacts” using (YES).
and press
● Transferring one contact from the cellular phone
Select “Add one contact” using
and press
(YES).
Setting speed dials
STEP 1
Select “Add SD” using
STEP 2
Select the desired data using
STEP 3
Press and hold the desired preset button (from
to
).
For details about setting speed dials from the call history: P. 305
For details about deleting speed dials: P. 304315
3-3. Using the Bluetooth® audio system
Deleting call histories
Select “Delete Call History” using
● Deleting outgoing call history
STEP 1
Select “Outgoing Calls” using
STEP 2
Select the desired phone number using
and press
(YES).
To delete all outgoing call history data, press then press
(YES).
(ALL) and
● Deleting incoming call history
STEP 1
Select “Incoming calls” using
STEP 2
Select the desired phone number using
and press
(YES).
To delete all incoming call history data, press then press
(YES).
(ALL) and
316
3-3. Using the Bluetooth® audio system
● Deleting missed call history
STEP 1
Select “Missed Calls” using
STEP 2
Select the desired phone number using
and press
(YES).
To delete all missed call history data, press press
(YES).
(ALL) and then
● Deleting a number from all call histories (Outgoing calls, Incoming
calls and Missed calls)
STEP 1
Select “All Calls” using
STEP 2
Select the desired phone number using
and press
(YES).
To delete all of the call histories data, press press
(YES).
(ALL) and then
317
3-3. Using the Bluetooth® audio system
Deleting a registered phone number
STEP 1
Select “Delete contacts” using
STEP 2
Select the desired phone number using
and press
(YES).
To delete all of the registered phone numbers, select “All delete”
using
and press
(YES).
Deleting another cellular phone’s phonebook
STEP 1
Select “Delete other PB” using
STEP 2
Select the desired phonebook using (YES).
and press
Setting call volume
STEP 1
Select “Call Volume” using
STEP 2
Change the call volume.
To decrease the volume: Turn
counterclockwise.
To increase the volume: Turn
clockwise.
318
3-3. Using the Bluetooth® audio system
Setting ringtone volume
STEP 1
Select “Ringtone Volume” using
STEP 2
Change the ringtone volume.
To decrease the volume: Turn
counterclockwise.
To increase the volume: Turn
clockwise.
Setting ringtone
STEP 1
Select “Ringtone” using
STEP 2
Using
, select a ringtone (1 - 3). To set the selected
ringtone, press
Transferring call histories
Select “Transfer Histories” using
and press
(YES).
319
3-3. Using the Bluetooth® audio system
■Phone number
Up to 1000 names can be stored.
■Call history
Up to 10 numbers can be stored in each of the outgoing, incoming and missed call history memories.
■Limitation of number of digits
A phone number that exceeds 24 digits cannot be registered.
320
3-4. Using the interior lights Interior lights list
Interior lights/personal lights (P. 322) Luggage compartment light (if equipped)
321
3-4. Using the interior lights
Interior lights/personal lights
Interior lights
Interior lights/personal lights
Turns the lights off Turns the lights on/off linked to door positions Turns the lights on
Personal lights
Turns the lights on Turns the lights off
322
3-4. Using the interior lights
Interior lights/personal lights
■Illuminated entry system
Vehicles without a smart key system When the interior lights switch is in the “DOOR” position, the interior lights automatically turn on/off according to the engine switch position, whether the doors are locked/unlocked, and whether the doors are open/closed. Vehicles with a smart key system When the interior lights switch is in the “DOOR” position, the interior lights automatically turn on/off according to “POWER” switch mode, the presence of the electronic key, whether the doors are locked/unlocked, and whether the doors are open/closed.
■To prevent 12-volt battery discharge Vehicles without a smart key system If the interior lights, personal lights or luggage compartment light remain on when the engine switch is “LOCK” position, the lights will go off automatically after 20 minutes. Vehicles with a smart key system If the interior lights, personal lights or luggage compartment light remain on when the “POWER” switch is off, the lights will go off automatically after 20
minutes.■Customization that can be configured at Toyota dealer
Settings (e.g. the time elapsed before lights turn off) can be changed. (Customizable features P. 522)
NOTICE
■To prevent 12-volt battery discharge
Do not leave the lights on longer than necessary when the hybrid system is off.
323
3-5. Using the storage features List of storage features
Bottle holders Auxiliary boxes (if equipped) Glove box Cup holders Console box (if equipped)
CAUTION
■Items that should not be left in the storage spaces
Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: ●Glasses may be deformed by heat or cracked if they come into contact
with other stored items.
●Lighters or spray cans may explode. If they come into contact with other stored items, the lighter may catch fire or the spray can may release gas, causing a fire hazard.
324
Glove box
3-5. Using the storage features
Glove box and console box
Pull up the lever to open the glove box.
CAUTION
■Caution while driving
Keep the glove box closed. In the event of sudden braking or sudden swerv- ing, an accident may occur due to an occupant being struck by the open glove box or the items stored inside.
Console box (if equipped)
Lift the lid while pulling up the knob to release the lock.
325
3-5. Using the storage features
Console box
Remove the lid at the bottom of the console box.
Small items can be stored in this space.
■When using the console box lid as an armrest
The lid can be slid forward or backwards.
CAUTION
■Caution while driving
Keep the console box closed. In the event of sudden braking, an accident may occur due to an occupant being struck by the open console box or the items stored inside.
326
Auxiliary boxes
Type A
Type B
Type C
3-5. Using the storage features
Auxiliary boxes
327
3-5. Using the storage features
Type D
Auxiliary boxes
Type E (if equipped)
CAUTION
■Items unsuitable for the box
Do not place items that easily roll over or extend past the box’s rim. The items may be thrown out of the tray, causing an accident.
328
3-5. Using the storage features
Cup holders
Cup holders
Front
Rear (type A)
Rear (type B)
Pull down the cup holder lid.
329
3-5. Using the storage features
Cup holders and bottle holders
CAUTION
■Items unsuitable for the cup holder
Do not place anything other than cups or beverage cans in the cup holders. Items in the cup holders may be thrown out of the holders in the event of an accident or sudden braking, causing injury. If possible, cover hot drinks to prevent burns.
■When not in use rear cup holder (type B)
Keep the cup holder closed. In the event of sudden braking, an accident may occur due to an occupant being struck by the open cup holder.
Bottle holders
■When using the bottle holder
●When storing a bottle, close the cap. ●The bottle may not be stored depending on its size or shape.
CAUTION
■Items unsuitable for the bottle holder
Do not place anything other than a bottle in the bottle holders. Items in the bottle holders may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
330
3-5. Using the storage features
Bottle holders
NOTICE
■Items that should not be stowed in the bottle holders
Put the cap on before stowing a bottle. Do not place open bottles in the bot- tle holders, or glasses and paper cups containing liquid. The contents may spill and glasses may break.
331
3-6. Other interior features Sun visors
To set the visor in the for- ward position, flip it down. To set the visor in the side position, flip down, unhook, and swing it to the side.
332
3-6. Other interior features Vanity mirrors
Slide the cover to open.
333
3-6. Other interior features Outside temperature display
The temperature display shows temperatures within the range of -40°F (-40°C) and 122°F (50°C).
The outside temperature dis- play of the “Drive Information” screen can be displayed by pressing the “DISP” switch. (P. 191)
■The outside temperature is displayed when
Vehicles without a smart key system The engine switch is in the “ON” position. Vehicles with a smart key system The “POWER” switch is in ON mode.
■Outside temperature display
The outside temperature is shown on the multi-information display when the steer- ing wheel climate remote control switches are used to adjust the air conditioning system’s temperature or change between outside and recirculated air modes. (P. 243)
334
3-6. Other interior features
■Display
In the following situations, the correct outside temperature may not be dis- played, or the display may take longer than normal to change: ●When the vehicle is stopped, or moving at low speeds (less than 16 mph
[25 km/h])
●When the outside temperature has changed suddenly (at the entrance/
exit of a garage, tunnel, etc.)
■When “” or “E” is displayed
The system may be malfunctioning. Take your vehicle to your Toyota dealer.
335
3-6. Other interior features Power outlet
The power outlet can be used for 12 V accessories that run on less than 10 A.
■The power outlet can be used when
Vehicles without a smart key system The engine switch is in the “ACC” or “ON” position. Vehicles with a smart key system The “POWER” switch is in ACCESSORY or ON mode.
NOTICE
■To avoid damaging the power outlet
Close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short cir- cuit.
■To prevent blown fuse
Do not use an accessory that uses more than 12 V 10 A.
■To prevent 12-volt battery discharge
Do not use the power outlet longer than necessary when the hybrid system is off.
336
3-6. Other interior features Seat heaters
Turns on the front left seat heater Turns on the front right seat heater The indicator light comes on. Push the switch once again to turn off the seat heater.
■The seat heaters can be used when The “POWER” switch is in ON mode.
■When not in use
Turn the seat heater off. The indicator light goes off.
: If equipped 337
3-6. Other interior features
CAUTION
■Burns
●Use caution when seating the following persons in a seat with the seat
heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the physically chal-
lenged
• Persons with sensitive skin • Persons who are fatigued • Persons who have taken alcohol or drugs that induce sleep (sleeping
drugs, cold remedies, etc.)
●Do not cover the seat with anything when using the seat heater.
Using the seat heater with a blanket or cushion increases the temperature of the seat and may lead to overheating.
●Do not use the seat heater more than necessary. Doing so may cause
minor burns or overheating.
NOTICE
■To prevent seat heater damage
Do not put heavy objects that have an uneven surface on the seat and do not stick sharp objects (needles, nails, etc.) into the seat.
■To prevent 12-volt battery discharge
Turn the seat heaters off when the hybrid system is off, and check that the indicator is off.
338
3-6. Other interior features Coat hooks
CAUTION
■Items that cannot be hung on the coat hook
Do not hang coat hangers or other hard or sharp objects on the hook. If the SRS curtain shield airbags deploy, these items may become projectiles, causing death or serious injury.
: If equipped 339
3-6. Other interior features Assist grips
An assist grip installed on the ceiling can be used to support your body while sitting on the seat.
Front Rear (if equipped)
CAUTION
■Assist grip
Do not use the assist grip when getting in or out of the vehicle or rising from your seat.
NOTICE
■To prevent damage to the assist grip
Do not hang any heavy object or put a heavy load on the assist grip.
340
3-6. Other interior features Floor mat
Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet.
STEP 1
STEP 2
the
Insert retaining hooks (clips) into the floor mat eye- lets.
Turn the upper knob of each retaining hook (clip) to secure the floor mats in place. *: Always align the marks.
The shape of the retaining hooks (clips) may differ from that shown in the illustration.
341
3-6. Other interior features
CAUTION
Observe the following precautions. Failure to do so may cause the driver's floor mat to slip, possibly interfering with the pedals while driving. An unexpectedly high speed may result or it may become difficult to stop the vehicle, leading to a serious accident. ■When installing the driver's floor mat
●Do not use floor mats designed for other models or different model year
vehicles, even if they are Toyota Genuine floor mats.
●Only use floor mats designed for the driver's seat. ●Always install the floor mat securely using the retaining hooks (clips) pro-
vided.
●Do not use two or more floor mats on top of each other. ●Do not place the floor mat bottom-side up or upside-down.
■Before driving
●Check that the floor mat is securely fixed in the correct place with all the provided retaining hooks (clips). Be especially careful to perform this check after cleaning the floor.
●With the hybrid system stopped and the shift lever in P, fully depress each pedal to the floor to make sure it does not interfere with the floor mat.
342
3-6. Other interior features Luggage cover
■ Removing the luggage cover STEP 1
Unhook the cords.
STEP 2
Push the luggage cover for- ward the anchors.
disengage
to
STEP 3
Remove the luggage cover.
: If equipped 343
3-6. Other interior features
■ Installing the luggage cover STEP 1
Place the luggage cover on the anchors.
STEP 2
Push the luggage cover until a click sound is heard.
STEP 3
Hook the cords.
344
Maintenance and care
4-1. Maintenance and care Cleaning and protecting the vehicle exterior......... 346
Cleaning and protecting the vehicle interior.......... 3494-2. Maintenance Maintenance requirements.................. 352
General maintenance....... 355
Emission inspection and maintenance (I/M) programs........................ 3594-3. Do-it-yourself maintenance Do-it-yourself service precautions .................... 360
Hood ................................ 364
Positioning a floor jack ..... 366
Engine compartment........ 368
12-volt battery .................. 379
Tires ................................. 384
Tire inflation pressure ...... 392
Wheels ............................. 396
Air conditioning filter......... 399
Wireless remote control/ electronic key battery..... 401
Checking and replacing fuses .............................. 404
Light bulbs........................ 415345
4-1. Maintenance and care Cleaning and protecting the vehicle exterior
Perform the following to protect the vehicle and maintain it in prime condition:
● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
● Wash the vehicle body using a sponge or soft cloth, such as a
chamois.
● For hard-to-remove marks, use car wash soap and rinse thor-
oughly with water.
● Wipe away any water. ● Wax the vehicle when the waterproof coating deteriorates.
If water does not bead on a clean surface, apply wax when the vehi- cle body is cool.
■Automatic car washes
●Fold the mirrors and remove the antenna before washing the vehicle. Start washing from the front of the vehicle. Make sure to re-install the antenna and extend the mirrors before driving.
●Brushes used in automatic car washes may scratch the vehicle surface
and harm your vehicle’s paint.
●In certain automatic car washes, the rear spoiler may interfere with machine operation. This may prevent the vehicle from being cleaned properly or result in damage to the rear spoiler.
■High pressure car washes
●Do not allow the nozzles of the car wash to come within close proximity
of the windows.
●Before using the car wash, check that the fuel filler door on your vehicle
is closed properly.
346
4-1. Maintenance and care
■When using a car wash (vehicles with a smart key system)
If the door handle becomes wet while the electronic key is within the effec- tive range, the door may lock and unlock repeatedly. In that case, follow the following correction procedures to wash the vehicle: ●Place the electronic key in a location 6 ft. (2 m) or more away from the
vehicle. (Take care to ensure that the key is not stolen.)
●Set the electronic key to battery-saving mode to disable the smart key
system. (P. 53)
■Aluminum wheels (if equipped)
●Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or abrasive cleaners. Do not use strong or harsh chemical cleaners. Use the same mild detergent and wax as used on the paint.
●Do not use detergent on the wheels when they are hot, for example after
driving for long distance in the hot weather.
●Wash detergent from the wheels immediately after use.
■Bumpers
Do not scrub with abrasive cleaners.
CAUTION
■When washing the vehicle
Do not apply water to the inside of the engine compartment. Doing so may cause the electrical components etc. to catch fire.
■Precautions regarding the exhaust pipe
Exhaust gasses cause the exhaust pipe to become quite hot. When washing the vehicle, be careful not to touch the pipe until it has cooled sufficiently, as touching a hot exhaust pipe can cause burns.
347
4-1. Maintenance and care
NOTICE
■To prevent paint deterioration and corrosion on the body and compo-
nents (aluminum wheels etc.) ●Wash the vehicle immediately in the following cases:
• After driving near the sea coast • After driving on salted roads • If coal tar or tree sap is present on the paint surface • If dead insects, insect droppings or bird droppings are present on the
paint surface
• After driving in an area contaminated with soot, oily smoke, mine dust,
iron powder or chemical substances
• If the vehicle becomes heavily soiled with dust or mud • If liquids such as benzene and gasoline are spilled on the paint surface
●If the paint is chipped or scratched, have it repaired immediately. ●To prevent the wheels from corroding, remove any dirt and store in a place
with low humidity when storing the wheels.
■Cleaning the exterior lights
●Wash carefully. Do not use organic substances or scrub with a hard brush.
This may damage the surfaces of the lights.
●Do not apply wax to the surfaces of the lights.
Wax may cause damage to the lenses.
■To prevent damage to the antenna
Remove the antenna in the following situations: ●When the antenna will touch the ceiling of a garage or other such places ●When a car cover is to be used to cover the vehicle
■Antenna installation and removal precautions
●Before driving, ensure that the antenna is installed. ●When the antenna is removed, such as before entering an automatic car wash, make sure to store it in a suitable place so as not to lose it. Also, before driving, make sure to reinstall the antenna in its original position.
348
4-1. Maintenance and care Cleaning and protecting the vehicle interior
The following procedures will help protect your vehicle's interior and keep it in top condition: ■ Protecting the vehicle interior
Remove dirt and dust using a vacuum cleaner. Wipe dirty sur- faces with a cloth dampened with lukewarm water.
■ Cleaning the synthetic leather areas
● Remove loose dirt using a vacuum cleaner. ● Apply a mild soap solution to the synthetic leather using a
sponge or soft cloth.
● Allow the solution to soak in for a few minutes. Remove the
dirt and wipe off the solution with a clean, damp cloth.
■Shampooing the carpets
There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam. Rub in overlapping circles. Do not use water. Wipe dirty surfaces and let them dry. Excellent results are obtained by keeping the carpet as dry as possible.
■Seat belts
Clean with mild soap and lukewarm water using a cloth or sponge. Also check the belts periodically for excessive wear, fraying or cuts.
349
4-1. Maintenance and care
CAUTION
■Water in the vehicle
●Do not splash or spill liquid in the vehicle, such as on the floor, in the hybrid battery (traction battery) air vents, and in the luggage compartment. Doing so may cause the hybrid battery, electrical components, etc. to mal- function or catch fire.
●Do not get any of the SRS components or wiring in the vehicle interior wet.
(P. 118) An electrical malfunction may cause the airbags to deploy or not function properly, resulting in death or serious injury.
■Cleaning the interior (especially instrument panel)
Do not use polish wax or polish cleaner. The instrument panel may reflect off the windshield, obstructing the driver's view and leading to an accident, resulting in death or serious injury.
350
4-1. Maintenance and care
NOTICE
■Cleaning detergents
●Do not use the following types of detergent, as they may discolor the vehi-
cle interior or cause streaks or damage to painted surfaces: • Non-seat portions: Organic substances such as benzene or gasoline,
alkaline or acidic solutions, dye, and bleach
• Seats: Alkaline or acidic solutions, such as thinner, benzene, and alco-
hol
●Do not use polish wax or polish cleaner. The instrument panel's or other
interior part’s painted surface may be damaged.
■Water on the floor
Do not wash the vehicle floor with water. Vehicle systems such as the audio system may be damaged if water comes into contact with electrical components such as the audio system above or under the floor of the vehicle. Water may also cause the body to rust.
■Cleaning the inside of the rear window
●Do not use glass cleaner to clean the rear window, as this may cause damage to the rear window defogger heater wires. Use a cloth dampened with lukewarm water to gently wipe the window clean. Wipe the window in strokes running parallel to the heater wires.
●Be careful not to scratch or damage the heater wires.
351
4-2. Maintenance Maintenance requirements
To ensure safe and economical driving, day-to-day care and regular maintenance are essential. It is the owner's responsibility to perform regular checks. Toyota recommends the following maintenance: ■ General maintenance
General maintenance should be performed on a daily basis. This can be done by yourself or by a Toyota dealer.
■ Scheduled maintenance
Scheduled maintenance should be performed at specified inter- vals according to the maintenance schedule. For details about maintenance items and schedules, refer to the “Scheduled Maintenance Guide” or “Owner’s Manual Supplement”.
■ Do-it-yourself maintenance
You can perform some maintenance procedures by yourself. Please be aware that do-it-yourself maintenance may affect war- ranty coverage. The use of Toyota Repair Manuals is recommended. For details about warranty coverage, see the separate “Owner’s War- ranty Information Booklet” or “Owner’s Manual Supplement”.
■Repair and replacement
It is recommended that genuine Toyota parts be used for repairs to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war- ranty coverage.
352
4-2. Maintenance
■Reset the maintenance data (U.S.A. only)
After the required maintenance is performed according to the maintenance schedule, please reset the maintenance data. To reset the data, follow the procedures described below: STEP 1
Vehicles without a smart key system Switch the display to the odometer (P. 190) and then turn the engine switch off. Vehicles with a smart key system Switch the display to the odometer (P. 190) and then turn the “POWER” switch off. Vehicles without a smart key system Turn the engine switch to the “ON” position. The multi-information display's initial screen will be displayed for a few seconds. While the initial screen is being displayed, press the “TRIP” steering switch (P. 188) 3 times, pressing and holding the switch on the third time. Vehicles with a smart key system Turn the “POWER” switch to ON mode. The multi-information dis- play's initial screen will be displayed for a few seconds. While the initial screen is being displayed, press the “TRIP” steering switch (P. 188) 3 times, pressing and holding the switch on the third time. Continue to press and hold the button until the trip meter displays “000000”.
STEP 2
STEP 3
■Allow inspection and repairs to be performed by a Toyota dealer
●Toyota technicians are well-trained specialists and are kept up to date with the latest service information. They are well informed about the operations of all systems on your vehicle.
●Keep a copy of the repair order. It proves that the maintenance that has been performed is under warranty coverage. If any problem should arise while your vehicle is under warranty, your Toyota dealer will promptly take care of it.
353
4-2. Maintenance
CAUTION
■If your vehicle is not properly maintained
Improper maintenance could result in serious damage to the vehicle and possible serious injury or death. ■Handling of the 12-volt battery
●Engine exhaust, some of its constituents, and a wide variety of automobile components contain or emit chemicals known to the State of California to cause cancer and birth defects and other reproductive harm. Work in a well ventilated area.
●Oils, fuels and fluids contained in vehicles as well as waste produced by component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Avoid exposure and wash any affected area immediately.
●12-volt battery posts, terminals and related accessories contain lead and lead compounds which are known to cause brain damage. Wash your hands after handling. (P. 379)
354
4-2. Maintenance General maintenance
Listed below are the general maintenance items that should be per- formed at the intervals specified in the “Owner's Warranty Informa- tion Booklet” or “Owner’s Manual Supplement/Scheduled Maintenance Guide”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice.
Engine compartment
Items
Check points
Brake fluid
Coolant
Engine oil
Exhaust system
Radiator/condenser
Washer fluid
Is the brake fluid at the correct level? (P. 375) Is the engine/power control unit coolant at the correct level?
(P. 373)
(P. 369)
Is the engine oil at the correct level? There should not be any fumes or strange sounds. The radiator and condenser should be free from foreign (P. 375) objects. Is there sufficient washer fluid? (P. 378)
355
4-2. Maintenance
Vehicle interior
Items
Check points
Check the connections. (P. 379) • The accelerator pedal should move smoothly (without uneven pedal effort or catching). • Does the brake pedal move smoothly? • Does the brake pedal have appro- priate clearance from the floor? (P. 503) • Does the brake pedal have the correct amount of free play? (P. 503) • The vehicle should not pull to one side when the brakes are applied. • The brakes should work effec- tively. • The brake pedal should not feel spongy. • The brake pedal should not get too close to the floor when the brakes are applied. • Do the head restraints move smoothly and lock securely? • When parked on a slope and the parking brake is on, is the vehicle securely stopped? • Do the indicators and buzzers function properly? • Do all the lights come on?
12-volt battery
Accelerator pedal
Brake pedal
Brakes
Head restraints (Adjustable type)
Hybrid transmission “Park” mech- anism
Indicators/buzzers
Lights
356
4-2. Maintenance
Items
Check points
Parking brake
Seat belts
Seats
Steering wheel
• Does the parking brake lever operate normally? • When parked on a slope and the parking brake is on, is the vehicle securely stopped? • Do the seat belts operate smoothly? • The seat belts should not be dam- aged. • Do the seat controls operate properly? • Does the steering wheel rotate smoothly? • Does the steering wheel have the correct amount of free play? • There should not be any strange sounds coming from the steering wheel.
357
4-2. Maintenance
Vehicle exterior
Items
Check points
Doors
Engine hood
Fluid leaks
Tires
Windshield wipers/rear window wiper (if equipped)
• Do the doors operate smoothly? • Does the engine hood lock sys- tem work properly? • There should not be any signs of fluid leakage after the vehicle has been parked. • Is the tire inflation pressure cor- rect? • The tires should not be dam- aged or excessively worn. • Have the tires been rotated according to the maintenance schedule? • The wheel nuts should not be loose. • The wiper blades should not show any signs of cracking, splitting, wear, contamination or deformation. • The wiper blades should clear the windshield/rear window without streaking or skipping.
CAUTION
■If the hybrid system is operating
Turn the hybrid system off and ensure that there is adequate ventilation before performing maintenance checks.
358
4-2. Maintenance Emission inspection and maintenance (I/M) programs
Some states have vehicle emission inspection programs which include OBD (On Board Diagnostics) checks. The OBD system moni- tors the operation of the emission control system. ■ If the malfunction indicator lamp comes on
The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/ M test and may need to be repaired. Contact your Toyota dealer to service the vehicle.
■ Your vehicle may not pass the I/M test in the following situa-
tions: ● When the 12-volt battery is disconnected or discharged
Readiness codes that are set during ordinary driving are erased. Also, depending on your driving habits, the readiness codes may not be completely set.
● When the fuel tank cap is loose
The malfunction indicator lamp comes on indicating a tempo- rary malfunction and your vehicle may not pass the I/M test.
■ When the malfunction indicator lamp still remains on after
several driving trips The error code in the OBD system will not be cleared unless the vehicle is driven 40 or more times.
■ If your vehicle does not pass the I/M test
Contact your Toyota dealer to prepare the vehicle for re-testing.
359
4-3. Do-it-yourself maintenance Do-it-yourself service precautions
If you perform maintenance by yourself, be sure to follow the correct procedure as given in these sections.
Items
Parts and tools
12-volt battery condition(P. 379)
Brake fluid level
(P. 375)
Engine/power control unit coolant (P. 373) level
• Grease • Conventional wrench (for terminal clamp bolts) • FMVSS No.116 DOT 3 or SAE J1703 brake fluid • Rag or paper towel • Funnel (used only for adding brake fluid) • “Toyota Super Long Life Coolant” or a similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology For the U.S.A.: “Toyota Super Long Life Coolant” is pre-mixed with 50% coolant and 50% deionized water. For Canada: “Toyota Super Long Life Coolant” is pre-mixed with 55% coolant and 45% deionized water. • Funnel (used only for adding coolant)
360
4-3. Do-it-yourself maintenance
Items
Parts and tools
Engine oil level
(P. 369)
Fuses
(P. 404)
Light bulbs
(P. 415)
Radiator and condenser
(P. 375)
Tire inflation pressure (P. 392)
Washer fluid
(P. 378)
• “Toyota Genuine Motor Oil” or equivalent • Rag or paper towel • Funnel (used only for adding engine oil) • Fuse with same amperage rating as original • Bulb with same number and watt- age rating as original • Phillips-head screwdriver • Flathead screwdriver • Wrench
• Tire pressure gauge • Compressed air source • Water or washer fluid containing antifreeze (for winter use) • Funnel (used only for adding water or washer fluid)
361
4-3. Do-it-yourself maintenance
CAUTION
The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions: ■When working on the engine compartment
●Vehicles without a smart key system: Make sure that the engine switch is
in the “LOCK” position and the “READY” indicator is off. Vehicles with a smart key system: Make sure that the indicator on the “POWER” switch and the “READY” indicator are both off.
●Keep hands, clothing and tools away from the moving fan and engine
drive belt.
●Be careful not to touch the engine, power control unit, radiator, exhaust manifold, etc. right after driving as they may be hot. Oil and other fluids may also be hot.
●Do not leave anything that may burn easily, such as paper and rags, in the
engine compartment.
●Do not smoke, cause sparks or expose an open flame to fuel. Fuel fumes
are flammable.
■When working near the electric cooling fan or radiator grille
Vehicles without a smart key system: The electric cooling fan may keep rotating for about 3 minutes even after the engine switch is turned to the “LOCK” position. With the engine switch in the “ON” position, the electric cooling fan may automatically start to run if the air conditioning is on and/or the coolant tem- perature is high. Be sure the engine switch is in the “LOCK” position when working near the electric cooling fan or radiator grille. Vehicles with a smart key system: The electric cooling fan may keep rotating for about 3 minutes even after the “POWER” switch is off. With the “POWER” switch in ON mode, the electric cooling fan may automat- ically start to run if the air conditioning is on and/or the coolant temperature is high. Be sure the “POWER” switch is off when working near the electric cooling fan or radiator grille.
362
4-3. Do-it-yourself maintenance
CAUTION
■Safety glasses
Wear safety glasses to prevent flying or falling material, fluid spray, etc. from getting in your eyes.
NOTICE
■If you remove the air cleaner filter
Driving with the air cleaner filter removed may cause excessive engine wear due to dirt in the air.
363
4-3. Do-it-yourself maintenance Hood
Release the lock from the inside of the vehicle to open the hood.
Pull the hood lock release lever.
The hood will pop up slightly.
Pull up the auxiliary catch lever and lift the hood.
Hold the hood open by insert- ing the supporting rod into the slot.
STEP 1
STEP 2
STEP 3
364
4-3. Do-it-yourself maintenance
CAUTION
■Pre-driving check
Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury.
■After installing the support rod into the slot
Make sure the rod supports the hood securely from falling down on to your head or body.
NOTICE
■When closing the hood
Be sure to return the support rod to its clip before closing the hood. Closing the hood with the support rod up could cause the hood to bend.
365
4-3. Do-it-yourself maintenance Positioning a floor jack
When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury. Front
Rear
366
4-3. Do-it-yourself maintenance
CAUTION
■When raising your vehicle
Make sure to observe the following precautions to reduce the possibility of death or serious injury:
●Lift up the vehicle using a floor jack such as the one shown in the illustra- tion.
●When using a floor jack, follow the instructions of the manual provided with
the jack.
●Do not use the jack that was supplied with your vehicle. ●Do not put any part of your body underneath the vehicle when it is sup-
ported only by the floor jack.
●Always use floor jack and/or automotive jack stands on a solid, flat, level
surface.
●Do not start the hybrid system while the vehicle is supported by the floor
jack.
●Stop the vehicle on level, firm ground, set the parking brake and shift the
shift lever to P.
●Make sure to set the floor jack properly at the jack point.
Raising the vehicle with an improperly positioned floor jack will damage the vehicle and may cause the vehicle to fall off the floor jack.
●Do not raise the vehicle while someone is in the vehicle. ●When raising the vehicle, do not place any object on top of or underneath
the floor jack.
367
4-3. Do-it-yourself maintenance Engine compartment
Fuse boxes Engine oil filler cap
(P. 404)
(P. 370) Engine coolant radiator cap Power control unit coolant reservoir (P. 373) Brake fluid reservoir
(P. 375)
Engine coolant reservoir
(P. 373)
Engine/power control unit coolant radiator (P. 375) Electric cooling fan Condenser Engine oil level dipstick
(P. 375)
(P. 369) Washer fluid tank (P. 378)
368
4-3. Do-it-yourself maintenance
Engine oil
With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil STEP 1
Park the vehicle on level ground. After warming up the engine and turning off the hybrid system, wait more than 5 minutes for the oil to drain back into the bottom of the engine.
STEP 2
Holding a rag under the end, pull the dipstick out.
STEP 3
STEP 4
STEP 5
Wipe the dipstick clean. Reinsert the dipstick fully. Holding a rag under the end, pull the dipstick out and check the oil level.
Measuring side
Low Normal Excessive
The shape of the dipstick may differ depending on the type of vehicle or engine.
STEP 6
Wipe the dipstick and reinsert it fully.
369
4-3. Do-it-yourself maintenance
■ Adding engine oil
