Login- Download PDF Manual
-
high-speed driving.
: The simulation drive will stop. : The simulation drive will start toward the destination. After the start, this key
will be displayed as switch to high-speed driving.
, and when it is selected, the simulation drive will
: Move to the destination. : The EDIT ROUTE PREVIEW screen will be displayed. (See page 66.)
NOTE The visual speed of the simulation vehicle varies with the map scale selected. The speed appears to be faster with a wide-area map than with a zoom-in map.
67
00X_Navi_r3 05.2.24 3:18 PM Page 68
Route Options
■ Setting conditions for simulation drive You can change the simulation drive conditions using this procedure.
Press the
button or select
, then select
(route options), and then select
(route preview).
Select The EDIT ROUTE PREVIEW screen will appear.
(edit).
(to destination or next waypoint):
The simulation drive will stop at the destination or the next waypoint.
(to next POI):
The simulation drive will stop at a point of interest that has been set up on the route.
(delete):
A selected POI will be deleted. POI keys: When you select one of the six POI category keys, the system will retrieve the selected POI from the Quick POI storage and display it on the map. When you select the Page 75.
key, you can find POIs of other categories. For more details, see
68
00X_Navi_r3 05.2.24 3:18 PM Page 69
Route Options
If, for example, the simulation drive is started, your simulation vehicle will then stop at a restaurant on the route. If you then select restaurant.
(information), the system will display information on the
(restaurant) category key is selected and a
NOTE You must finish the simulation drive before you actually start to drive. Although the simulation drive will automatically stop when you actually start to drive, not finishing it properly can lead to an error in the display of your vehicle’s current position.
69
00X_Navi_r3 05.2.24 3:18 PM Page 70
Navigation Setup
Setting Your Navigation System Using the functions available from the Navigation Setup screen, you can change the map display conditions and alter the route guidance conditions.
Press the
button or select
Select The NAVIGATION SET UP screen will appear.
(navigation setup).
70
00X_Navi_r3 05.2.24 3:18 PM Page 71
Navigation Setup
Select any of the displayed functions as necessary. This screen consists of two pages. Change the page by using the
keys.
or
(user settings):
This function allows you to change the screen display and sound settings. (See Page 72.)
(quick POI selection):
This function allows you to set the point of interest categories that are displayed when you select the menu from the current position screen. (See Page 75.)
(volume):
This function allows you to adjust the voice volume. (See Page 77.)
(navigation information):
This function allows you to confirm the vehicle signal, the version of the DVD-ROM disc. (See Page 78.) (calibration):
You can use this function to correct display errors in the vehicle’s position and direction. (See Page 80.)
(set clock):
This function allows you to set the time. (See Page 83.)
(restore system defaults):
This function allows you to change the system’s current settings back to the default settings (factory settings). (See Page 84.)
71
00X_Navi_r3 05.2.24 3:18 PM Page 72
Navigation Setup
User settings
You can change the screen display and sound settings using this procedure.
Press the settings).
button or select
, then select
(navigation setup), and then select
(user
Select the setting item you wish to change. The USER SETTINGS screen consists of three pages. Use the change the screen page when selecting a setting item.
or
keys to
(K/m) and
Distance: Units of distance can be selected from Road Restriction Warnings: You can select or deselect display of traffic restriction warnings during route guidance. Keyboard layout: The layout of input keys can be selected from (“QWERTY” layout).
(“ABC” layout) or
(miles).
72
00X_Navi_r3 05.2.24 3:18 PM Page 73
Navigation Setup
Arrival Time: Time of arrival at the destination or a waypoint can be displayed in two different ways: estimated arrival time or remaining driving time. Select arrival time display or
for the remaining time display.
for the estimated
Color scheme: Select your preferred screen color from four options Map Mode: The map display mode can be set to any of the automatic, daytime, and nighttime modes.
to
(automatic): The brightness of the display will automatically change to daytime
(daytime):
brightness and nighttime brightness when the headlights are turned off and on, respectively. The brightness of the display is fixed at the daytime setting regardless of whether the headlights are on or off.
(nighttime): The brightness of the display is fixed at the nighttime setting
regardless of whether the headlights are on or off.
73
00X_Navi_r3 05.2.24 3:18 PM Page 74
Navigation Setup
Guidance Screen: This function allows you to select or deselect display of guidance messages on the screen. Freeway Information: This function allows you to select or deselect display of guidance messages when driving on freeways.
74
00X_Navi_r3 05.2.24 3:18 PM Page 75
Quick POI selection
Using this function, you can set the point of interest categories that are displayed when you select the Point of Interest menu key on the current map screen. Set up to six different categories that you use most frequently. (See Page 106 for the method of displaying POI categories on the map and searching for the nearest points of interest.)
Press the selection).
button or select
, then select
(navigation setup), and then select
(quick POI
Navigation Setup
Select one of the six category keys you wish to program into the Quick POI storage.
(default): Use this key to restore the factory settings.
Select a category. Once you have selected a category key, subcategories will be displayed.
Subcategories from all individual categories will be displayed together.
(all category list):
75
00X_Navi_r3 05.2.24 3:18 PM Page 76
Navigation Setup
Select the subcategories to be displayed on the map.
NOTE Repeat Steps 1 to 3 to add more POI categories for display on the menu screen.
76
00X_Navi_r3 05.2.24 3:18 PM Page 77
Volume
Use this function if you want to change the voice guidance volume setting from the default setting.
Press the
button or select
, then select
(navigation setup), and then select
(volume).
Navigation Setup
Select the desired key from between (maximum).
(minimum) and
(off): Select this key to mute the sound.
77
00X_Navi_r3 05.2.24 3:18 PM Page 78
Navigation Setup
Navigation information
This function allows you to confirm the vehicle signal, the version of the DVD-ROM disc. (See Page 79.)
■ Vehicle signal This function allows certain vehicle data and GPS satellite data to be displayed.
Press the information).
button or select
, then select
(navigation setup), and then select
(navigation
Select
(vehicle signal).
The VEHICLE SIGNAL screen will appear.
NOTE The Parking Brake will display as “Off”, regardless of whether the parking brake is activated or deactivated.
78
00X_Navi_r3 05.2.24 3:18 PM Page 79
■ Version Use this function to check the version of the DVD-ROM disc you are presently using.
Navigation Setup
Press the information).
button or select
, then select
(navigation setup), and then select
(navigation
Select
(version).
The version of the DVD-ROM disc will be displayed on the screen.
Version of the DVD-ROM disc
79
00X_Navi_r3 05.2.24 3:18 PM Page 80
Navigation Setup
Calibration
This function allows you to correct any display errors in the position and direction of your vehicle on the map display.
■ Adjusting current position and direction
Press the
button or select
, then select
(navigation setup), and then select
(calibration).
Select
(position/direction).
Move the crosshair
to the correct position, and then select
80
00X_Navi_r3 05.2.24 3:18 PM Page 81
Use select
or
to adjust the direction in which you are heading, and then
Navigation Setup
81
00X_Navi_r3 05.2.24 3:18 PM Page 82
Navigation Setup
■ Distance When selected, this function automatically corrects an error in the current position display that might occur after tire replacement.
Press the
button or select
, then select
(navigation setup), and then select
(calibration).
Select
NOTE You will have to drive about 6 miles (10 km) before the distance correction is complete.
82
00X_Navi_r3 05.2.24 3:18 PM Page 83
Set clock
Since the adjustments for minutes and seconds are made automatically using the time data provided by GPS satellites, you can set your clock by simply performing a time-zone adjustment using this function.
Press the
button or select
, then select
(navigation setup), and then select
(set clock).
Navigation Setup
Select display.
if you prefer 24-hour display; select
for 12-hour
Select back the time by one hour.
to advance the time by one hour; select
to push
83
00X_Navi_r3 05.2.24 3:18 PM Page 84
Navigation Setup
Restore system defaults
Use this function if you want to change all of the system’s current settings back to the default settings.
Press the system default).
button or select
, then select
(navigation setup), and then select
(restore
Select Select
to return all current systems settings to default. (default) to return average speed setting to default.
NOTE If you select this function, all your settings will be deleted.
84
00X_Navi_r3 05.2.24 3:18 PM Page 85
[Default List] Item Map display Search Area Display Guidance Language Map Orientation (1 and 2 screen) Map Display Mode Map Display Scale
Map Configuration Q-POI Map Display Show POI Icon Display Right Screen Setting, POI Passage Point Display/ Current Location, Map Screen
(Time Requirement, Time, Direction / Distance) Passage Point Display/ Full Route, Map Screen
(Time Requirement, Time, Direction / Distance) Notify Seasonal Restrict Freeway Information Language Selection Menu Language Navigation Setup Menu Distance Notify Traffic Restriction Audio Mute Keyboard Layout Arrival Time
Initial condition
US9 (EAST), US2 (WEST) US English, female North up Single-screen display Single-screen: 10,000 map (1/16 min) (100 m) Dual-screen: 40,000 map (1/4 min) (500 m) Arrow Mode Off Off On Next passage point
Destination
On Off
US English, female
Mile On On ABC Required remaining time
Item Color Scheme Map Mode Guidance Screen Q-POI Selection
Volume Presets Route Options Search Condition Route Preferences
Navigation Setup
Initial condition Auto On A : Gas station B : ATM C : Parks D : Grocery store E : All Restaurant F : Hotel
Quick Allow Toll Road: Off Allow Ferry: Off Allow Major Roads: On Allow Time Restricted Road: Off
85
00X_Navi_r3 05.2.24 3:18 PM Page 86
Stored Locations
You can store, edit, or delete any destinations, waypoints, and other marked points using the procedures described in this section.
86
Press the
button or select
Select
(stored locations).
Select the desired item.
(Memory Points):
Use this function to place markers on the map. (See Page 89.)
(Avoid Area):
Use this function to store into the system’s memory any areas you want to avoid. (See Page 97.)
(Destination and Waypoint):
Use this function to set the destination and waypoints. (See Pages 58 to 65.)
(Home):
You can store the location of your home in the system’s memory by using this function. (See page 100.)
00X_Navi_r3 05.2.24 3:18 PM Page 87
Stored Locations
(Previous Destination):
Use this function to delete previously stored destinations and waypoints. (See page 102.)
(Preset Destinations):
You can program a maximum of five destinations to keys for easy retrieval later on. (See page 104.)
Selecting this key allows you to display icons for memory points.
(Display memory point icons):
(Calculate):
Selecting this key prompts the start of route calculation.
Each of the above six functions has some or all of the following four standard editing functions (see the table below):
(add): (list): (delete): (delete all): You can delete all stored locations.
You can store a new location into memory. You can see a list of the stored locations. You can delete stored locations.
87
00X_Navi_r3 05.2.24 3:18 PM Page 88
Stored Locations
Editing keys displayed for each function are as follows:
Memory Points (100)
Avoid Area (10)
Home (1)
Previous Dest. (100)
Dest. & Way Pt. (Destination: 1
Way Point: 5)Preset Dests. (5)
The numbers in parentheses following the function names indicate the maximum locations you can store in the memory.
88
00X_Navi_r3 05.2.24 3:18 PM Page 89
Memory points
■ Storing new memory points Memory points can be stored into any of the four categories of storage locations.
Stored Locations
Press the points).
button or select
, then select
(stored locations), and then select
(memory
Select the storage location category for the memory point you wish to add.
Select
(add).
89
00X_Navi_r3 05.2.24 3:18 PM Page 90
Stored Locations
Set the memory point using the preferred method available on the displayed screen.
NOTE Up to 100 memory points can be stored. Once that number has been reached, you must delete memory points that you no longer require (see Page 94) before you can store new memory points. The number of memory points you can store is indicated on the screen.
90
00X_Navi_r3 05.2.24 3:18 PM Page 91
■ Reviewing and modifying memory points Using this function, you can review the stored memory points in the form of a list on the screen and modify names, icons, telephone numbers, and other memory point data.
Press the points).
button or select
, then select
(stored locations), and then select
(memory
Stored Locations
Select the category of the memory point to be modified.
Select
(list).
91
00X_Navi_r3 05.2.24 3:18 PM Page 92
Stored Locations
Select the memory point to be modified. You can change the sequence in which memory points are listed by selecting (distance),
(name), or
(icon),
(date).
Select the category key corresponding to the memory point to be modified.
(icon): Selecting this key allows you to choose a display icon.
and
of the CHANGE ICON screen contain standard icons, whereas
the “With Sound” (with sound) page contains icons that are accompanied by response sounds. Select listen to these sounds.
(with sound) to
92
and set the direction using
or
NOTE The “With direction” ( sounds only when you come near the memory point from the specified direction. Select
) keys in the “With Sound” page are used to activate response
or
00X_Navi_r3 05.2.24 3:18 PM Page 93
Stored Locations
(category): Use this key to change the storage category. After selecting
this key, select the key of the new category.
(name):
Select this key to change the name of a memory point. When the change has been completed, select (OK). Then select
(on) if the name is to be displayed on the map, or
(off) if it is not to be displayed.
(position):
Select this key to review the memory points and modify a memory point on the map screen. After checking or modifying it, select
(OK).
(telephone): Select this key to modify a telephone number. When the
modification has been completed, select
(OK).
93
00X_Navi_r3 05.2.24 3:18 PM Page 94
Stored Locations
■ Deleting memory points You can delete stored memory points by using this function.
Press the points).
button or select
, then select
(stored locations), and then select
(memory
Select the category of the memory point to be deleted.
Select
(delete).
Select the memory point to be deleted.
Confirmation message will be displayed. Select Select
(no) to cancel the deletion.
(yes).
94
00X_Navi_r3 05.2.24 3:18 PM Page 95
Stored Locations
■ Deleting all memory points Using this function, you can delete all memory points.
Press the points).
button or select
, then select
(stored locations), and then select
(memory
Select the category of the memory points to be deleted.
Select
(delete all).
Confirmation message will be displayed. Select Select
(no) to cancel the deletion.
(yes).
95
00X_Navi_r3 05.2.24 3:18 PM Page 96
Stored Locations
■ Modifying category names Use this function if you want to change the category names - (business), and
(entertainment) .
(marked point),
(personal),
Press the points).
button or select
, then select
(stored locations), and then select
(memory
Select the category for which the name is to be changed.
Select
(edit category).
Erase the letters of the category name using letters, and then select
, enter the new
96
00X_Navi_r3 05.2.24 3:18 PM Page 97
Avoid area
Stored Locations
■ Storing avoid areas If you use this function to store into the system’s memory the areas you want to avoid, the system will avoid the areas when calculating routes.
Press the
button or select
, then select
(stored locations), and then select
(avoid area).
Select
(add).
Set an avoid area using your preferred method. A map including the specified avoid area will appear. The method of setting avoid areas is identical to that of setting destinations.
97
00X_Navi_r3 05.2.24 3:18 PM Page 98
Stored Locations
Select
(reduce) or
(enlarge).
(reduce): Reduces the size of the avoid area. (enlarge): Increases the size of the avoid area.
Select
(OK).
NOTE • Reduce the scale of the map to specify a larger area. • Avoid areas can be set only when the scale of the map is 0.6 mile (1 km) or less.
98
00X_Navi_r3 05.2.24 3:18 PM Page 99
■ Reviewing and modifying avoid areas Using this function, you can review the stored avoid areas in the form of a list and modify them if necessary.
Press the
button or select
, then select
(stored locations), and then select
(avoid area).
Stored Locations
Select
(list).
Select the avoid area to be modified.
Select the key corresponding to the item to be modified. For details regarding the function of each key, refer to “Reviewing and modifying memory points” on Page 91.
NOTE The methods for deleting individual and all avoid areas are the same as those described on Page 94.
99
00X_Navi_r3 05.2.24 3:18 PM Page 100
Stored Locations
Home
■ Storing home Use this function to store your home location.
Press the
button or select
, then select
(stored locations), and then select
(home).
Select
(add).
Move the crosshair
to the location of your home and then select
(OK).
100
00X_Navi_r3 05.2.24 3:18 PM Page 101
NOTE To change your home location, select
(list) and then follow the home location storage procedure described above. Select
(delete) to delete the stored home location. Refer to “Deleting memory points” on Page 94 for further details on the
home deletion methods.
Stored Locations
101
00X_Navi_r3 05.2.24 3:18 PM Page 102
Stored Locations
Previous destination (deleting stored locations)
Use this function to delete previously set destinations.
Press the destinations).
button or select
, then select
(stored locations), and then select
(previous
Select If
(delete).
(all delete) is selected, all previously set destinations will be deleted.
Select the destination to be deleted.
: Use this key to display up to five previous destinations. : Use this key to display the previous destination. : Use this key to display the next destination. : Use this key to display up to five of the next destinations.
(name): Use this key to search through the list by name (alphabetical search). (date): Use this key to search through the list by date.
102
00X_Navi_r3 05.2.24 3:18 PM Page 103
Confirmation message will be displayed. Select Select
(no) to cancel the deletion.
(yes).
Stored Locations
103
00X_Navi_r3 05.2.24 3:18 PM Page 104
Stored Locations
Preset destinations
■ Storing preset destinations Using this function, you can program up to five frequently used destinations to keys for single-action retrieval later on.
Press the destinations).
button or select
, then select
(stored locations), and then select
(preset
Select
(add).
Select the desired key from preset keys ~ through @.
104
00X_Navi_r3 05.2.24 3:18 PM Page 105
Stored Locations
Set the location of a preset destination using your preferred method. The method of setting preset destinations is identical to that of setting destinations.
Select
(OK).
105
00X_Navi_r3 05.2.24 3:18 PM Page 106
Stored Locations
■ Reviewing and modifying preset destinations Using this function, you can review the preset destinations in the form of a list and modify them if necessary.
Press the destinations).
button or select
, then select
(stored locations), and then select
(preset
Select
(list).
Select any one of keys ~ through @ according to your modification requirements.
106
00X_Navi_r3 05.2.24 3:18 PM Page 107
Select the editing keys appropriate to the item to be modified. For details on the function of each key, refer to “Reviewing and modifying memory points” on Page 91.
Stored Locations
NOTE The methods for modifying individual and all preset destinations are the same as those described on Page 94 for memory points.
107
00X_Navi_r3 05.2.24 3:18 PM Page 108
Other Functions
Displaying POIs on a map
Using this function, you can display POIs on the current map screen. Touch the current map screen.
Select
(points of interest).
Select desired POIs (up to five) using the displayed category keys. For selecting POIs of categories other than the six categories on the screen, select
(list categories) and select any POIs from the newly displayed categories. (all local POIs): Use this key to search for all local points of interest (see
below).
Once you have made your selection of POIs, corresponding markers will appear on the current map screen. To delete the markers for these POIs, see Page 111.
NOTE Displayed information about each POI facility might not include recent changes. It is recommended that you check the location or business days/hours before departure.
108
00X_Navi_r3 05.2.24 3:18 PM Page 109
Other Functions
■ Local search
Touch the current map screen.
Select
(points of interest).
Select
(all local points of interest).
109
00X_Navi_r3 05.2.24 3:18 PM Page 110
Other Functions
Select the POI you want to find from the list of categories.
: Use this key to display up to five previous POIs. : Use this key to display the previous POI. : Use this key to display the next POI. : Use this key to display up to five of the next POIs.
: Use this key to search through the list by distance. : Use this key to search through the list by icon type. : Use this key to search through the list by name (alphabetical search).
Once you have made your selection of POIs, corresponding markers will appear on the map.
110
00X_Navi_r3 05.2.24 3:18 PM Page 111
Displaying POI data
You can display the information on a POI, such as the name, address and telephone number.
Other Functions
Display the desired POI markers on the current map screen. (See Pages 75 and 108 for the procedure.)
Select the POI marker for which you want information by moving the crosshair The name of the POI will appear. If no data is stored for the selected POI, no name is displayed.
over it.
Select The information on the POI will be displayed.
(information).
: Use this key to store the POI location as a memory point.
111
00X_Navi_r3 05.2.24 3:18 PM Page 112
Other Functions
Deleting POI markers
Use this function when you want to delete any POI markers on the map.
Touch the current map screen.
Select
(point of interest).
Select The marker for the POI will disappear from the map.
(point of interest off).
112
00X_Navi_r3 05.2.24 3:18 PM Page 113
General Information
■ Accuracy of vehicle position Area in which GPS signals cannot be received
Because the radiowave signals from the GPS satellites travel primarily by line of sight, the navigation system might not be able to receive the signals in the areas described below. (If the GPS mark does not appear on the map screen, it means that the GPS radiowave signals are not being properly received.) Inside a tunnel (1) (2) Inside a building (3) Under a three-dimensional road system such as for high-
speed roads
(4) On boulevards lined with trees (5) Between buildings (6) Under a cliff or in a cave • If the GPS antenna or its surroundings are blocked by an obstacle (including cargo), it might not be possible for the system to receive the GPS radiowave signals.
• If multiple paths are created due to the reflection from
buildings, a large measurement error could occur, causing the vehicle’s mark to deviate from its actual position.
Deviation of the vehicle’s position mark
The vehicle’s position mark could deviate from its actual position when the vehicle is being driven under the conditions listed below or due to conditions of the GPS satellites.
If the vehicle travels on a road whose actual shape differs from that in the map data, the vehicle’s mark could deviate from the actual position. The correct position will eventually appear on the screen through the correction function. If the screen does not show the correct position for an excessively long time, correct the current position or make an automatic correction. (1) The vehicle’s mark could appear on a parallel road. (2) When the road splits into a narrow Y, the vehicle’s mark
could appear on the other fork of the Y.
(3) When the vehicle makes a right or left turn, the vehicle’s
(4)
mark could appear on one street ahead or behind. If the vehicle is transported by means other than the vehicle’s own power, such as on a ferryboat, the vehicle’s mark will remain in the position it was before the transport until the system can calculate the position through the GPS.
(5) When the vehicle is driven on a steep incline, the
(6)
(7)
(8)
vehicle’s mark could deviate from its actual position. If there are continuous gradual curves in the same direction, the vehicle’s mark could deviate from its actual position. If the vehicle is driven in a zigzag pattern, such as through frequent lane changes, the vehicle’s mark could deviate from its actual position. If the vehicle is placed on a turntable, such as in a parking area, and turned with the ignition OFF, the vehicle’s mark could deviate from its actual orientation.
113
00X_Navi_r3 05.2.24 3:18 PM Page 114
General Information
The vehicle’s mark could also deviate even after the vehicle has exited the parking area.
(9) The vehicle’s mark could deviate from its actual position if the vehicle is driven using tire chains or snow tires on a snow-covered road or on a mountainous road.
(10) The vehicle’s mark could deviate from its actual position
after the tires have been replaced.
■ How the vehicle position is detected Detecting the vehicle’s position through the GPS
GPS stands for “Global Positioning System”, which is a system used for detecting an object’s position through the use of satellites of the U.S. Department of Defense. Radiowave signals from three or more satellites are received by the navigation system, which utilizes the principle of triangulation to detect the position at which the radiowave signals are received. When the navigation unit is receiving the GPS radiowave signals, a “GPS” mark will appear on the map screen.
Detecting the vehicle’s position through self-contained navigation
Self-contained navigation is a system that detects the vehicle’s position by calculating the vehicle’s driven distance and turning angle though the use of various types of sensors that are mounted on the vehicle.
114
Through the use of self-contained navigation, the vehicle’s position can be detected even in an area where the GPS radiowave signals cannot be received.
Making corrections to the detection of the vehicle’s position through map matching
• In map matching, the position information resulting from
the detection of the vehicle’s position and the locus of the travel of the vehicle up to the present are constantly compared to the shape of the roads on the map in order to correct the vehicle’s position mark to the most appropriate road.
• If the vehicle is driven on a road whose actual shape
differs from its map data, the vehicle’s position mark on the map could deviate from its actual position. Occasionally, the correction of the vehicle’s position mark to the actual road on the map can be observed, particularly after the vehicle has turned at an intersection or has exited from a parking area.
00X_Navi_r3 05.2.24 3:18 PM Page 115
■ Accuracy of the route guidance The conditions listed below do not indicate a malfunction.
(1) The guidance might prompt the driver to drive straight
even though the vehicle is being driven on a straight road.
(2) The directional guidance could display multiple place
names.
(3) If the vehicle makes a turn at an intersection before the guided route, the wrong type of voice guidance could be outputted.
(4) The guidance might not be outputted while the vehicle
is making a turn at an intersection.
(5) The system might not be able to search for the proper
route.
(6) If there is no road to the destination or if there is only a narrow road, the route might be indicated up to an area that is short of the destination.
(7) The repeat search could take a long time while the
vehicle is being driven at high speeds.
(8) While the system is searching again for the route, the route indication might not appear in time for the next right or left turn.
(9) The route might not change even if a search is made
again.
(10) The system might guide the driver to make a U-turn. (11) The system might guide the driver to a road that cannot
actually be travelled (such as a road to which entry is prohibited).
General Information
(12) The system might not output guidance even if the
vehicle is driven in reverse on the guided route.
(13) The system might not use a local ferryboat even if the
ferry priority is selected.
(14) If the intersection that you’re being guided to is near the
end of the route search, the system might not be able to provide guidance.
(15) The route might not go on a toll road even if the toll-road
priority is selected. Similarly, a route that uses a toll road could appear on the screen even if the toll-road priority is not selected. (The driver may or may not be able to select “toll-road priority” if both toll and free roads are available.)
115
00X_Navi_r3 05.2.24 3:19 PM Page 116
General Information
When a Problem Occurs Confirm whether the problem is due to a minor operational error or a malfunction in the system by referring to the table below before you contact your SUBARU dealer for any repair service.
The map does not scroll even when the vehicle is moving.
The screen shown might not be the current map screen.
The vehicle marker does not appear.
The screen shown might not be the current map screen.
The GPS marker is not displayed.
See Page 15 of this manual for instructions on displaying the current map screen.
See Page 15 of this manual for instructions on displaying the current map screen.
The GPS antenna or your vehicle might be in a position where GPS signals cannot be received.
Try moving the GPS antenna or your vehicle to a position where there are no obstacles around.
There is no voice guidance.
• Route guidance might be suspended. • The guidance volume might be too low.
• See “Volume” on Page 77.
116
00X_Navi_r3 05.2.24 3:19 PM Page 117
Small spots or bright flashes appear on the screen display.
This is probably due to the natural characteristics of the liquid crystal display (LCD).
There is nothing wrong with the display and no need for concern.
General Information
The DVD-ROM disc cannot be ejected.
The disc might be incompatible or might have been inserted incorrectly.
117
00X_Navi_r3 05.2.24 3:19 PM Page 118
CAUTION
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE This Class B digital apparatus complies with Canadian ICES-003.
Location : Bottom Unit
Location : Monitor top surface
FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
00X_Navi_r3 05.2.24 3:18 PM Page 3
Contents
Safety Warnings.......................................................................5
Before Use ................................................................................6
System Components and Controls......................................10
Starting Up the Navigation System ....................................12
Language Selection ...............................................................14
Markers and Controls Displayed on Maps..........................15
Screens During Route Setting ......................................................15
Screens During Route Guidance ..................................................17
Menu Screen Keys and Functions........................................18
Map Operations .....................................................................20
Selecting Map Orientation ............................................................20
Changing Map Scale ......................................................................21
Setting Route .........................................................................23
Setting Destination ........................................................................23
Setting destination/waypoints by scrolling the map ........................................23
■ Selecting route ..........................................................................................25
Setting the destination from the navigation menu ..........................................26
■ “Address” method ..................................................................................28
■ “Memory Point” method ..........................................................................31
■ “Home” method or method using stored destinations ............................33
■ “Point of Interest” method ......................................................................34
■ “Previous Destination” method ................................................................36
■ “Select from Map” method ......................................................................37
■ “Freeway Entrance/Exit” method ............................................................38
■ “Emergency” method ..............................................................................40
■ “Coordinates” method ..............................................................................42
■ “Intersection” method ..............................................................................44
■ “Phone number” method..........................................................................46
..................................................48
■ Using “Change Search Area” functionRoute Guidance .....................................................................49
Route Guidance Screen..................................................................49
Zoom-in Map at Intersection ........................................................50
Dual Map Display............................................................................51
Freeway Information ......................................................................52
Replaying Voice Guidance ............................................................52
Route Options ........................................................................53
Setting Route Options ....................................................................53
Search condition ..............................................................................................55
Detour ..............................................................................................................56
Route preferences............................................................................................57
Destination and waypoints ..............................................................................58
■ Addition of waypoints ..............................................................................58
■ Modifying destination or waypoint positions ............................................60
■ Modifying visiting order ............................................................................62
■ Deleting destination or waypoints ............................................................64
■ Deleting destination and all waypoints......................................................65
Display route ....................................................................................................66
Route preview ..................................................................................................67
■ Setting conditions for simulation drive ......................................................68
Navigation Setup...................................................................70
Setting Your Navigation System ..................................................70
User settings ....................................................................................................72
Quick POI selection..........................................................................................75
Volume..............................................................................................................77
Navigation information ....................................................................................78
■ Vehicle signal ............................................................................................78
■ Version ......................................................................................................79
Calibration ........................................................................................................80
■ Adjusting current position and direction....................................................80
■ Distance ....................................................................................................82
Set clock ..........................................................................................................83
Restore system defaults ..................................................................................8400X_Navi_r3 05.2.24 3:18 PM Page 4
Contents
Stored Locations....................................................................86
Memory points ................................................................................................89
■ Storing new memory points......................................................................89
■ Reviewing and modifying memory points ................................................91
■ Deleting memory points ............................................................................94
■ Deleting all memory points........................................................................95
■ Modifying category names ........................................................................96
Avoid area ........................................................................................................97
■ Storing avoid areas ....................................................................................97
■ Reviewing and modifying avoid areas ......................................................99
Home..............................................................................................................100
■ Storing home ..........................................................................................100
Previous destination (deleting stored locations) ............................................102
Preset destinations ........................................................................................104
■ Storing preset destinations......................................................................104
■ Reviewing and modifying preset destinations ........................................106
Other Functions ...................................................................108
Displaying POIs on a map ..............................................................................108
■ Local search ............................................................................................109
Displaying POI data ........................................................................................111
Deleting POI markers ....................................................................................112
General Information ............................................................113
■ Accuracy of vehicle position ..................................................................113
■ How the vehicle position is detected ....................................................114
■ Accuracy of the route guidance ..............................................................115
When a Problem Occurs ..............................................................11600X_Navi_r3 05.2.24 3:18 PM Page 5
Safety Warnings
You will find a number of WARNINGs, CAUTIONs and NOTEs in this supplement. These safety warnings alert you to potential hazards that could result in injury to you or others. Please read these safety warnings as well as all other portions of this supplement carefully in order to gain a better understanding of how to use your Navigation system safely.
WARNING
A WARNING indicates a situation in which serious injury or death could result if the warning is ignored.
CAUTION
A CAUTION indicates a situation in which injury or damage to your vehicle including Navigation system, or both, could result if the caution is ignored.
NOTE A NOTE gives informaton or suggestions how to make better use of your Navigation system.
00X_Navi_r3 05.2.24 3:18 PM Page 6
Before Use
WARNING
READ THIS MANUAL FIRST
Read this supplement carefully before using your navigation system. We are not liable for accidents or other problems resulting from failure to follow the instructions in this supplement.
OBEY LOCAL ROAD SIGNS AND REGULATIONS
Always obey local road signs and regulations while following instructions given by the navigation system. Some of the data on the DVD-ROM disc may be outdated due to changes in local road signs and regulations. Furthermore, the data on the DVD-ROM disc does not take into account variable factors such as the weather, road congestion at different times of the day, temporary road closures due to road construction, and special events. Local road signs and regulations always take precedence over directions given by the system. Failure to obey them could place you in physical danger or in violation of the law.
DRIVE SAFELY • Before following an instruction (for example, in the case of changing direction) given by the system, check that the action would be safe to take in the current traffic conditions. Continue to pay attention to safety while following any instruction. • Do not be distracted by the navigation screen. Failure to keep your attention on the road could lead to an accident. When you need to look at the screen while driving, do so for the shortest time possible and avoid staring at the screen. • You must stop the vehicle in a safe place before operating the navigation system. For safety’s sake, some of the navigation system’s controls and functions cannot be used unless the vehicle is stationary. • Use this system only in locations where it is legal to do so. Some states/provinces may have laws prohibiting video screens within sight of the driver.
VOLUME LEVEL
Keep the system’s volume level low enough for you to be able to hear outside sounds while driving. To do otherwise may prevent you from reacting appropriately to traffic conditions and could result in an accident.
00X_Navi_r3 05.2.24 3:18 PM Page 7
CAUTION
CAUTION
Before Use
The displays contain mercury. Therefore, the displays must be removed before vehicle disposal. Once the displays have been removed, please reuse, recycle or dispose of them as hazardous waste.
FOREIGN OBJECTS
Do not allow foreign objects to enter the disc insertion slot, including your fingers. Foreign objects inside the system’s main unit could cause an electric shock or a fire. If the main unit emits smoke or an unusual smell, stop using the system immediately and you contact the nearest SUBARU dealer.
STOP OPERATION IN THE EVENT OF A PROBLEM
In the event of a problem such as the absence of sound or video, try pressing the reset button. Should the problem persist, stop using the system and you contact the nearest SUBARU dealer. (The reset button is also used when you need to upgrade the program. Insert an upgrade disc and press the reset button.)
NEVER DISASSEMBLE OR MODIFY THE SYSTEM
Any attempt to disassemble or modify any part of the system could lead to an electric shock or a fire, or some other type of accident.
00X_Navi_r3 05.2.24 3:18 PM Page 8
Before Use
■ Points to note before use Starting the engine before using the system
The navigation system can be used with the ignition key in either the ON position or the ACC position. To preserve the battery, however, it should be used with the engine running whenever possible. Using the system for a long time with the engine off can cause the battery to run down.
Delay before display of current position
The system will not immediately display a correct indication of your vehicle’s current position after being switched on for the first time or after the battery has been disconnected for a long time. It will display a correct current position indication as soon as it receives Global Positioning System (GPS) signals.
Handling the GPS antenna
Do not paint the antenna. Doing so could impair or prevent signal reception.
Disabled switches
Some switches are disabled during operation of the system. These switches are displayed in fainter colors and no messages are displayed for them.
Risk of damage to the main unit
Be mindful of the occupant compartment temperature. Using the system when the occupant compartment temperature is extremely high or low can damage it or cause it to malfunction. Also, note that the system’s main unit can be damaged by strong vibration and by any metallic object or water that gets inside.
Program reloading after battery disconnection
Condensation
The navigation program will be erased from the system’s memory if the battery is disconnected. If this happens, load the provided DVD-ROM disc in the system’s main unit and turn the ignition switch to the ON or ACC position. The system will automatically reload the program and start operating normally again.
Incorrect operation on rough roads
The system may operate incorrectly or be unable to read the data on the DVD-ROM disc when subjected to severe vibration caused by driving on rough roads.
Condensation can form on the lens inside the main unit when there is a rapid change in occupant compartment temperature (for example, when the heater is switched on in cold weather). Such condensation can cause the system to operate abnormally. If you wait an hour or so for the condensation to disappear, the system should start working normally again. If normal operation is still not restored after several hours, we recommend that you contact the nearest SUBARU dealer.
00X_Navi_r3 05.2.24 3:18 PM Page 9
Replacing the DVD-ROM disc
If you need to replace the DVD-ROM disc, make sure the replacement disc is compatible with your system’s main unit. Inserting an incompatible disc could damage the unit.
■ Handling precautions for DVD-ROM discs • Handle DVD-ROM discs carefully. Any DVD-ROM disc with
excessive warping or scratches on its surface can cause reading errors.
• Store DVD-ROM discs away from direct sunlight, which can
cause warping and render them unusable.
• DVD-ROM discs rotate at high speeds inside the system’s main unit. Never use a cracked or badly warped disc; doing so could damage the unit.
• To clean a DVD-ROM disc, lightly wipe it with a soft cloth in
straight lines from the center hole toward the outer edge. • Never clean DVD-ROM discs with benzene, thinner, record
spray, antistatic spray, or chemical swabs.
• Do not touch the DVD-ROM disc’s data surface (the surface
without a printed label). A dirty data surface can cause reading errors. Always hold a DVD-ROM disc by the center hole and at one point on the outer edge, or by two points on the outer edge.
• Do not write anything on DVD-ROM discs or affix anything,
such as stickers, to them.
Before Use
00X_Navi_r3 05.2.24 3:18 PM Page 10
System Components and Controls
10
1 Monitor
This button is used to display the destination entry screen of the navigation system.
This button is used to display the menu screen of the navigation system.
This button is used to switch to the navigation system’s current map screen from any other screen.
This button is used to zoom out or zoom in the map displayed on the screen.
This button is used to display the Audio or RSE (Rear Seat Entertainment) screen.
This button is used to display the vehicle information screen. Refer to the Owner’s Manual Supplement for Monitor System for further details.
00X_Navi_r3 05.2.24 3:18 PM Page 11
This button is used to adjust the brightness and contrast of the screen image as well as to display a calendar. Refer to the Owner’s Manual Supplement for Monitor System for further details.
9 Navigation system main unit
p Eject button
Depressing this button ejects the DVD-ROM disc.
q Disc insertion slot
Load a DVD-ROM disc into the system’s main unit through this slot. Inserting an edge of the disc in the slot causes it to be drawn in automatically.
w Reset button
You can use this button in the event of a problem. It is also used when you need to upgrade the program.
NOTE • The navigation system main unit is located under the driver's seat. • Before you load a DVD-ROM disc for the first time, press the reset
button for more than one second. Use the tip of a pen or similar item for this purpose.
• If a malfunction occurs during operation, try pressing the reset
button. The system may recover from the problem.
System Components and Controls
11
00X_Navi_r3 05.2.24 3:18 PM Page 12
Starting Up the Navigation System
Use the following procedure to start up the navigation system and display the current map screen.
Start the engine. The CAUTION screen will appear, followed by the opening screen.
12
00X_Navi_r3 05.2.24 3:18 PM Page 13
Starting Up the Navigation System
Carefully read the instructions on the CAUTION screen (cited below), then select
CAUTION Make selections only when vehicle is stopped. Watching screen while driving can lead to a serious accident. Some map data may be incorrect. Use judgment and obey traffic rules. See Owner’s Manual for complete operating instructions.
The current map screen will appear.
NOTE • To make a selection, touch the desired key displayed on the screen. • The CAUTION screen remains on the display unless you select • When you use the navigation system for the first time, Greenwich Mean Time will be displayed. Adjust the system’s clock to the right
time using the clock setting screen (“SET CLOCK”) as described on Page 83.
13
00X_Navi_r3 05.2.24 3:18 PM Page 14
Language Selection
Use the following procedure to select your preferred language for the menu screens and the voice guidance.
Press the
button or select
on the current map screen.
Select
(Language Selection).
Select your preferred language from the list.
14
00X_Navi_r3 05.2.24 3:18 PM Page 15
Markers and Controls Displayed on Maps
Screens During Route Setting Touch a point on the map. A crosshair (scroll mark) will appear on the screen. Then touch a desired point on the map. The map will scroll with the selected point at the center.
Press button or select to return to the current map screen.
Scroll the map
1 Time
Indicates the current time.
2 GPS marker
Shows the status of the signal from GPS satellites. When this marker appears, your navigation system is receiving GPS signals and using them to calculate the position of your vehicle.
3 Map orientation control
Used to select either a “north up” display or “heading up” display of the map. (See Page 20.)
4 Zoom-out/zoom-in control and map scale
The up-pointing or down-pointing arrow is used to zoom out or zoom in the map. The number indicates the scale of the displayed map. The button also provides the zooming function.
5 Menu control
Select this key to display the menu screen. (See Page 18.)
6 Screen configuration control
Allows you to select a preferred display type for route guidance. (See Page 49.)
7 Vehicle marker
Indicates the current position and direction of your vehicle.
15
00X_Navi_r3 05.2.24 3:18 PM Page 16
Markers and Controls Displayed on Maps
8 “Store memory point” key Stores markers on the map. This key appears just for a few seconds after a map screen is selected.
9 Point of interest (POI) key
Allows you to display the POI selection screen (see Page 108). On the screen, you can program POIs to appear on a map as markers. This key appears just for a few seconds after a map screen is selected.
0 Distance from current position
Indicates the distance from the current position to the position marked by
- Destination/waypoint key
Used to program a destination or waypoint at the position marked by
on a scroll screen.
16
00X_Navi_r3 05.2.24 3:18 PM Page 17
Screens During Route Guidance
(5 seconds)
Select the screen
Markers and Controls Displayed on Maps
1 Distance and time to destination
Indicates the time (either approximate time required or time of arrival) and the distance to the destination or a waypoint.
2 Route
A thick green line indicates the route you should follow.
3 Turn guidance arrow
Indicates the direction of your turn at the next intersection/junction as well as the distance to the intersection/junction. 4 “Repeat voice” key
If this key is selected, the last voice guidance will be repeated.
5 Current road name
Shows the name of the road you are currently driving on.
6 “Display whole route” key
If this key is selected, a map containing the entire route will be displayed. (See Page 66.)
7 “Change route” key
Selecting this key displays the route option menu. Selecting a new route option causes the system to calculate the selected route.
17
00X_Navi_r3 05.2.24 3:18 PM Page 18
Menu Screen Keys and Functions
