2007 Nissan Murano Owners Manual

Record the key number on the key number plate/metal tag and keep it in a safe place (such as your wallet), NOT IN THE VEHICLE. A key number plate is supplied with your key. Keep the plate in a safe place. NISSAN does not record key numbers so it is very important to keep track of your key number plate. As many as 4 Intelligent Key can be used with one vehicle. For information concerning the pur- chase and use of an additional Intelligent Key, contact a NISSAN dealer.

To protect belongings when you leave a key with someone, give them the valet key only.

CAUTION

Be sure to carry the Intelligent Key with you when driving. The Intelligent Key is a precision device with a built-in trans- mitter. To avoid damaging it, please note the following. — Wetting may damage the Intelligent Key. If the Intelligent Key gets wet, immediately wipe until is com- pletely dry.

it

— Do not bend, drop or strike it against

another object.

— Do not place the Intelligent Key for an extended period in a place where temperatures exceed 140°F (60°C).

— Do not change or modify the Intelli-

gent Key.

— Do not use a magnet key holder.

墌 06.7.5/Z50-D/V5.0 墍

SPA1919

Intelligent Key 2 sets

1. 2. Mechanical key (metal key)*1*2 2 sets 3. Valet key (with built-in transponder chip)*1
4. Key number plate *1 The mechanical key and valet key are equipped with Nissan Vehicle Immobilizer

3-10 Pre-driving checks and adjustments

tioner and audio systems”).

— Do not place the Intelligent Key near an electric appliance such as a tele- vision set or personal computer.

— Do not place the Intelligent Key in a storage area (for example, a door pocket or glove box). It could be dam- aged or activated unexpectedly.

쐌 Do not allow the Intelligent Key to come into contact with water or salt water, and be careful not to let the key be washed in a washing machine. This could affect the system function. 쐌 If an Intelligent Key or the mechani- cal key is lost or stolen, NISSAN recommends erasing the ID code of that Intelligent Key. This will prevent the Intelligent Key from unauthorized use to unlock the vehicle. For infor- mation regarding the erasing proce- dure, please contact a NISSAN dealer.

DOOR LOCKS/UNLOCKS PRECAUTION 쐌 After locking with the door handle request switch, pull the door handle and make sure the doors are securely locked.

쐌 After locking with the lift gate request switch, push the lift gate opener switch and make sure the doors are securely locked.

쐌 To prevent the Intelligent Key from being left inside the vehicle, make sure you carry the key with you and then lock the doors.

쐌 You can lock or unlock the doors and the fuel-filler door using only the door handle request switch, which detects the Intelligent Key.

쐌 When you try to unlock the door while pulling the door handle, the door may not unlock. In this case, release the door handle and the door will unlock. Pull the door handle again and the door will open.

쐌 The outside beep, which indicates the lock and unlock functions, can be canceled with the LOCK/UNLOCK button on the Intelligent Key (see “Operation with intelligent remote keyless entry system” later in this section) or the vehicle electronic system on the monitor (see “4. Display screen, heater, air condi-

Pre-driving checks and adjustments 3-11

墌 06.7.5/Z50-D/V5.0 墍

4. All the doors (including the lift gate) and

fuel-filler door will lock.

5. The hazard indicator flashes twice and out-

side buzzer sounds twice.

The hazard indicator and buzzer mode can be changed with the Intelligent remote keyless entry system (see “Operation with intelligent remote keyless entry system” later in this section) or vehicle electronic systems on the monitor (see “4. Display screen, heater, air conditioner and audio systems”).

*1: Doors lock with the door handle request switch or lift gate request switch while a mechanical or valet key is in the ignition switch or the ignition switch is pushed in.

*3: Doors do not

*2: Doors lock with the door handle request switch or lift gate request switch while the ignition switch is not in the LOCK position. lock by pushing the door handle request switch or lift gate request switch while any door is open. A beep sounds to warn you. However, doors lock with the metal key even if any door is open. *4: Doors do not lock with door handle request switch or lift gate request switch with the Intelligent Key inside the vehicle and a beep sounds to warn you. However, when an Intelligent Key is inside

SPA1921

SPA1922

INTELLIGENT KEY OPERATION You can lock or unlock the doors and fuel-filler door without taking the key out from your pocket or purse.

3-12 Pre-driving checks and adjustments

When you carry the Intelligent Key with you, you can lock or unlock all doors by pushing the door handle request switch 쎻A or lift gate request switch 쎻B within the range of operation. Locking doors and fuel-filler door 1. Turn the ignition switch to the LOCK position. (Remove the key if any key is in the ignition switch.)*1, *2

2. Close all the doors.*3

3. Push any door handle request switch or lift gate request switch while carrying the Intel- ligent Key with you.*4

墌 06.7.5/Z50-D/V5.0 墍

쐌 the ignition switch is pushed 쐌 the mechanical key or the valet key is inserted

into the ignition switch

Re-lock time can be adjusted or cancelled with the vehicle electronic systems on the monitor (see “4. Display screen, heater, air conditioner and audio systems”). The room light will come on for 30 seconds when the door is unlocked using the request switch. The room light can be turned off without waiting for 30 seconds by turning the ignition switch to the ON position or by locking the doors.

the vehicle, doors can be locked with an- other Intelligent Key.

Unlocking doors and fuel-filler door 1. Push the door handle request switch or lift

gate request switch once.

Driver’s side: 쐌 The driver door and fuel-filler door unlock. Front passenger side or lift gate: 쐌 Only corresponding door unlocks. 2. The hazard indicator flashes once and out- side buzzer sounds once if all doors are completely closed with the ignition key in any position except the ON position.

3. Push the door handle request switch or lift gate request switch again within 5 seconds.

쐌 All doors and the fuel-filler door unlock. 쐌 The hazard indicator flashes once and out- side buzzer sounds once if all doors are completely closed.

All doors will be locked automatically after push- ing the door handle request switch or lift gate request switch unless one of the following op- erations is performed within 1 minute. 쐌 any door is opened

SSD0417

OPERATING THE ENGINE Ignition switch positions Push in the ignition switch in the range (쎻A to 쎻B ) when you turn it. LOCK (Normal parking position) 쎻A : The ignition switch can only be locked in the 쎻A position. The ignition switch will be unlocked when it is pushed in, and turned to the ACC position 쎻C while carrying the Intelligent Key.

Pre-driving checks and adjustments 3-13

墌 06.7.5/Z50-D/V5.0 墍

ACC (Accessories) 쎻C : This position activates electrical accessories such as the radio, when the engine is not running. ON (Normal operating position) 쎻D : This position turns on the ignition system and electrical accessories. START 쎻E : This position starts the engine. As soon as the engine has started, release the switch immedi- ately. It will automatically return to the ON posi- tion. For important safety information, see “Ignition switch” in the “5. Starting and driving” section. The ignition switch cannot be turned back to the LOCK position unless the selector lever is in P position. (It can be turned to only 쎻B .) If the ignition switch cannot be turned back to the LOCK position after shifting the selector lever to the P position, turn the ignition switch to the ACC position once and turn back to the LOCK position.

3-14 Pre-driving checks and adjustments

CAUTION

Do not leave the vehicle with the igni- tion switch in ACC or ON positions when the engine is not running for an ex- tended period. This can discharge the battery.

SPA2174

Starting the engine When driving the vehicle, be sure to carry the Intelligent Key with you.

1. Securely depress the brake pedal.

2. Slowly push the ignition switch in.

When the Intelligent Key warning light 쎻A in the instrument panel comes on in green, the ignition switch can be turned.

3. Turn the ignition switch to the START posi-

tion and the engine will be started.

4. When the engine starts, release the ignition

switch.

墌 06.7.5/Z50-D/V5.0 墍

• inside the glove box or the door pocket • on the instrument panel • in the corner of interior compartment.

쐌 If

it is difficult to turn the ignition switch,

perform the following: • Push the ignition switch again and slowly

turn it left and to the right.

• Turn the ignition switch while gently turn- ing the steering wheel to the left or right.

Stopping the engine 1. Shift the selector lever to the P position. 2. Turn the ignition switch to the ACC position.

WARNING

Do not start the engine from outside the vehicle through the window. Doing so could lead to an accident and injury. Be sure to sit in the driver’s seat to use the key.

For important safety information, see “Starting the engine” in the “5. Starting and driving” section. 쐌 When the ignition switch is pushed under the following conditions, the key warning light in the instrument panel comes on in red. It is not possible to turn the ignition switch when: • you do not have the Intelligent Key with

you

• the Intelligent Key battery has run down • you have a Intelligent Key for another

vehicle with you

쐌 Slowly turn the ignition switch after the key warning light comes on in green. If it is turned quickly, it may stick and be difficult to turn. 쐌 The engine may not start if the Intelligent Key

is placed:

WARNING

When you leave the vehicle, be sure to observe the following: 쐌 Shift the selector lever to P. (In other positions, the ignition switch will not return to LOCK.)

쐌 Securely return the ignition switch to

LOCK.

쐌 Set the parking brake. Failure to do so could result in unexpected vehicle movement and could lead to severe injury.

INTELLIGENT KEY OPERATING RANGE The Intelligent Key functions can be used only when you carry the key with you and operate as specified in the operating range inside or outside the vehicle. When the Intelligent Key battery runs down or where there are strong radio waves or noise, the operating range may be narrower or the key may be inoperative.

Pre-driving checks and adjustments 3-15

墌 06.7.5/Z50-D/V5.0 墍

switch or the lift gate request switch is shown in the illustration. 쎻1 31.5 in (0.8 m) from the door handle request

쎻2 31.5 in (0.8 m) from the lift gate request

switch

switch

쐌 If you are too close to the door or door glass,

the Intelligent Key may not operate.

쐌 If the Intelligent Key is in the operating range, it is possible for anyone who does not carry the Intelligent Key to lock/unlock the doors by pushing the door handle request switch or the lift gate request switch.

SPA1949

Operating range for engine start function The operating range for starting the engine is inside the vehicle. 쐌 If the Intelligent Key is on the instrument panel, inside the glove box or door pocket, or the corner of interior compartment, it may not be possible to start the engine.

쐌 If the Intelligent Key is near the door or door glass outside the vehicle, it may be possible to start the engine.

墌 06.7.5/Z50-D/V5.0 墍

SPA1948

Operating range of the door lock/ unlock function The operating range of the door lock/unlock function by pushing the door handle request

3-16 Pre-driving checks and adjustments

WARNING SIGNALS To help prevent the vehicle from moving unex- pectedly by erroneous operation of the Intelli- gent Key or to help prevent the vehicle from being stolen, a chime or buzzer sounds from inside and outside the vehicle and a warning light comes on in the instrument panel. When a chime or beep sounds or the warning light comes on, be sure to check the vehicle and Intelligent Key. Audible reminder and warning when locking the doors When the chime or buzzer sounds from inside and outside the vehicle, check for the following: 쐌 The ignition switch is turned to the LOCK

position.

쐌 The Intelligent Key is not

vehicle.

left

inside the

쐌 Doors are closed securely. 쐌 The selector lever is in the P position.

쐌 The selector lever is in the P position and the ignition switch is turned to the LOCK posi- tion.

쐌 The mechanical key or the valet key is not

inserted into the ignition switch.

쐌 The warning chime may stop when one of the

following is performed. • Returning the ignition switch to the LOCK

position.

• Removing the mechanical key or the valet

key.

SPA2175

• Closing the doors.

Audible reminder and warning when the engine stops When the P position selecting warning light 쎻B in the instrument panel blinks in red: 쐌 Make sure the selector lever is in the P

position.

When the chime sounds intermittently: 쐌 Make sure the selector lever is in the P position and the ignition switch is turned to the LOCK position.

the chime sounds continuously when the

If driver’s door is opened, check the following:

Alarm and warning when the engine starts When the key warning light 쎻A is blinking in red and the outside buzzer sounds, make sure the Intelligent Key is inside the vehicle. Warning for low battery power 쐌 This warning is to let you know that

the battery of the Intelligent Key will run down soon. Replace it with a new one. Refer to the “8. Maintenance and do-it-yourself” section for battery replacement. • The green blinking key warning light 쎻A the Pre-driving checks and adjustments 3-17

goes out about 30 seconds after

墌 06.7.5/Z50-D/V5.0 墍

ignition switch is turned to ON.

쐌 We recommend replacing the battery at a

NISSAN dealer.

Preventing the Intelligent Key from being left in the vehicle If you lock all doors using the power door lock switch with the Intelligent Key in the vehicle, all of the doors unlock immediately and the buzzer will warn you when the door is closed.

3-18 Pre-driving checks and adjustments

墌 06.7.5/Z50-D/V5.0 墍

TROUBLE-SHOOTING GUIDE Symptom

Possible Cause

When pushing the door handle request switch or the lift gate request switch

The outside buzzer sounds for approxi- mately 2 seconds.

The doors cannot be locked.

When closing the doors

When locking the doors

When opening the driver’s door

When stopping the engine When turning the ignition switch When starting the engine

The outside buzzer sounds for approxi- mately 10 seconds. The key warning light in the instrument panel blinks in red and the outside buzzer sounds 3 times. The outside buzzer sounds for approxi- mately 3 seconds and all doors unlock. The outside buzzer sounds for approxi- mately 3 seconds and all doors unlock.

A warning chime sounds continuously.

The P position warning light in the in- strument panel blinks in red. A warning chime sounds continuously. The key warning light in the instrument panel blinks in green.

The ignition switch is not turned to the LOCK position.

The Intelligent Key has been left in the ve- hicle. The Intelligent Key has been left in the trunk room. The ignition switch is not in the LOCK posi- tion, or the mechanical key or valet key is inserted into the ignition switch.

The selector lever is not in the P position. The ignition switch is not turned to the LOCK position. The battery charge is low.

When pushing the ignition switch

The key warning light in the instrument panel comes on in red.

The Intelligent Key is not in the vehicle.

Remedy

Take out the Intelligent Key from the vehicle and push the door handle request switch or the lift gate request switch. Turn the ignition switch to the LOCK posi- tion and push the door handle request switch or the lift gate request switch while carrying the Intelligent Key with you. Close all the doors securely and push the door handle request switch or the lift gate request switch while carrying the Intelligent Key with you. Turn the ignition switch to the LOCK posi- tion.

Take out the Intelligent Key from the vehicle and close the door. Take out the Intelligent Key from the vehicle and close the door. Turn the ignition switch to the LOCK posi- tion. Remove the mechanical key or valet key from the ignition switch. Make sure that the selector lever is in the P position. Turn the ignition switch to the LOCK posi- tion. Replace the battery with a new one. See “BATTERY REPLACEMENT” on page 8-24. If the key warning light comes on in red even while you are carrying the Intelligent Key, the battery is completely discharged. Replace the battery with a new one. See “BATTERY REPLACEMENT” on page 8-24.

The Intelligent Key is not in the vehicle.

Be sure to carry the Intelligent Key with you.

Pre-driving checks and adjustments 3-19

墌 06.7.5/Z50-D/V5.0 墍

쐌 the Intelligent Key is too far away from the

vehicle

쐌 the Intelligent Key battery runs down After locking with the Intelligent remote keyless entry function, pull the door handle to make sure the doors are securely locked. The operating range varies depending on the environment. To securely operate the LOCK and UNLOCK buttons on the Intelligent Key, ap- proach the vehicle to about 3 ft (1 m) from the door. The panic alarm will not activate when the mechanical key or the valet key is in the ignition switch.

Trouble-shooting examples When it is difficult to turn the ignition switch 쐌 Push the ignition switch and turn it to the left

and then to the right.

쐌 While gently turning the steering wheel to the

left or right, turn the ignition switch.

OPERATION WITH INTELLIGENT REMOTE KEYLESS ENTRY SYSTEM It is possible to lock/unlock all doors, fuel-filler door, activate the panic alarm and open the windows by pushing the buttons on the Intelli- gent Key from outside the vehicle. Before locking the doors, make sure the key is not left in the vehicle. The LOCK/UNLOCK button on the Intelligent Key can operate at a distance of approximately 33 ft (10 m) from the vehicle. (The effective distance depends upon the conditions around the vehicle.) As many as 4 Intelligent Key can be used with one vehicle. For information concerning the pur- chase and use of an additional Intelligent Key, contact a NISSAN dealer. The LOCK and UNLOCK buttons on the Intelli- gent Key will not operate when: 3-20 Pre-driving checks and adjustments

SPA1926

쎻A LOCK button 쎻B UNLOCK button 쎻C PANIC alarm How to use remote keyless entry system Setting hazard indicator and horn (buzzer) mode:

This vehicle is set in hazard indicator and horn (buzzer) mode when you first receive the vehicle. The hazard indicator and horn (buzzer) mode also can be changed with vehicle electronic systems on the monitor. See “4.

墌 06.7.5/Z50-D/V5.0 墍

Display screen, heater, air conditioner and audio systems”.

For buzzer operation, refer to the following chart.

In hazard indicator and horn (buzzer) mode, when the LOCK button 쎻A is pushed, the hazard indicator flashes twice and the horn chirps once (refer to the “operation guide” chart for the Intelligent Key request switch mode). When the UNLOCK button 쎻B is pushed, the hazard indi- cator flashes once.

If hazard indicator and horn mode is not neces- sary, you can switch to hazard indicator only mode by following the switching procedure.

In hazard indicator only mode, when the LOCK button 쎻A is pushed, the hazard indicator flashes twice. When the UNLOCK button 쎻B is pushed, neither the hazard indicator nor the horn oper- ates.

(Switching procedure) Push the LOCK 쎻A and UNLOCK 쎻B buttons on the Intelligent key simultaneously for more than 2
seconds to switch from one mode to the other.

When pushing the buttons to set hazard indica- tor mode, the hazard indicator flashes 3 times. When pushing the buttons to set hazard indica- tor and horn mode, the hazard indicator flashes

SPA1950A

once and the horn chirps once. Locking doors and fuel-filler door:

1. Remove the mechanical key or the valet key if

any key is in the ignition switch.*1

2. Close all the doors.*2
3. Push the LOCK button 쎻A on the Intelligent

Key.

4. All the doors (including lift gate) and fuel-filler

door will lock.

All of the doors will lock when the LOCK button 쎻A on the Intelligent Key is pushed

Pre-driving checks and adjustments 3-21

墌 06.7.5/Z50-D/V5.0 墍

even though the ignition switch is in the ON position.

5. The hazard indicator flashes twice and the

horn chirps once.

쐌 When the LOCK button 쎻A is pushed with all doors locked, the hazard indicator flashes twice and the horn chirps once as a reminder that the doors are already locked.

*1: Doors lock with the Intelligent Key while the mechanical key or the valet key is in the ignition switch or the ignition switch is pushed in.

*2: Doors do not lock and buzzer sounds when the LOCK button is pushed while any door is open.

Unlocking doors and fuel-filler door: 1. Push the UNLOCK button 쎻B on the Intelli-

gent Key once.

쐌 The driver’s door and fuel-filler door unlock 쐌 The hazard indicator flashes once if all doors are completely closed with the ignition switch in any position except the ON position.

쐌 The interior light turns on and the light timer activates for 30 seconds when the switch is in the DOOR position with the ignition switch in any position except the ON position.

3-22 Pre-driving checks and adjustments

2. Push the UNLOCK button 쎻B on the Intelli-

gent Key again within 5 seconds.

쐌 All doors unlock. 쐌 Lift gate unlocks. 쐌 The hazard indicator flashes once if all doors

are completely closed.

All doors will be locked automatically unless one of the following operations is performed within 1
minute of pushing the UNLOCK button 쎻B . 쐌 any door is open 쐌 the ignition switch is pushed 쐌 the mechanical key or the valet key is inserted

into the ignition switch

The interior light can be turned off without waiting for 30 seconds by turning the ignition switch to the ON position or by locking the doors with the Intelligent Key. Opening and closing front windows: 쐌 To open the windows, push the UNLOCK button 쎻B for about 3 seconds or turn the driver’s door key lock with the metal key to the rear of the vehicle for about 2 seconds after the door is unlocked. To stop opening, release the UNLOCK but- ton 쎻B or turn the key to the neutral position.

쐌 To close the front windows, turn the driver’s door key lock to the front of the vehicle for about 2 seconds after the door is locked. To stop closing, turn the key to the neutral position.

The door windows will open or close while turning the metal key. See “Doors” earlier in this section. Using the panic alarm: If you are near your vehicle and feel threatened, you may activate the alarm to call attention as follows: 1. Push the PANIC button 쎻C on the Intelligent Key for longer than 0.5 seconds with the metal key removed from the ignition switch or the ignition switch not pushed in.

2. The theft warning alarm and headlights will

stay on for 25 seconds.

3. The panic alarm stops when: 쐌 It has run for 25 seconds, or 쐌 Any of the buttons on the Intelligent Key are

pushed.

墌 06.7.5/Z50-D/V5.0 墍

Windows open/close with the mechanical key See “Opening and closing windows” on the previous page.

쐌 To install the mechanical key to the intelligent key, securely lock the lock knob and then check that the mechanical key will not move.

CAUTION

Be sure to carry the Intelligent Key with the mechanical key installed in it.

Locking/unlocking the doors with the key (mechanical key and valet key) The doors can be locked/unlocked by inserting the mechanical and valet key into the key cylin- der in the driver’s door in the same way as the ordinary key. Starting the engine with the mechanical key and valet key 1. Securely depress the brake pedal. 2.

Insert the mechanical key or the valet key into the ignition switch.

3. Turn the ignition switch to the START posi-

tion and start the engine.

4. After starting the engine, release the switch. For important safety information, see the “5. Starting and driving” section.

SPA1951

OPERATION WITH THE MECHANICAL KEY AND VALET KEY If the Intelligent Key cannot be used because its battery is discharged, use the metal key to lock or unlock the doors and use the mechanical key or the valet key, which is registered to the NISSAN Vehicle Immobilizer System compo- nents, to start the engine. Removing the mechanical key 쐌 Release the lock knob at the back of the intelligent key and remove the mechanical key.

Pre-driving checks and adjustments 3-23

墌 06.7.5/Z50-D/V5.0 墍

HOOD

LIFT GATE

1. Pull the hood lock release handle 쎻1 located below the instrument panel; the hood will then spring up slightly.

2. Move the lever 쎻2 at the front of the hood

with your fingertips and raise the hood.

3. When closing the hood, slowly close the

hood and make sure it locks into place.

3-24 Pre-driving checks and adjustments

SPA1578

WARNING

쐌 Make sure the hood is completely closed and latched before driving. Failure to do so could cause the hood to fly open and result in an accident. 쐌 If you see steam or smoke coming to

from the engine compartment, avoid injury do not open the hood.

SPA1947
쐌 The power door lock system allows you to lock or unlock all doors including the lift gate simultaneously.

쐌 Push the opener switch and pull up the lift

gate to open.

WARNING

Do not drive with the lift gate open. This could allow dangerous exhaust gases to be drawn into the vehicle. See “Precau- tions when driving”

starting

and

墌 06.7.5/Z50-D/V5.0 墍

in the “5. Starting and driving” section for exhaust gas.

WARNING

쐌 Always be sure the lift gate has been closed securely to prevent it from opening while driving.

쐌 Do not drive with the lift gate open. This could allow dangerous exhaust gases to be drawn into the vehicle.

SPA1915

Emergency unlock lever If the lift gate cannot be opened with the door lock switch or remote controller due to a dis- charged battery, follow the next steps. 1. Remove the cover inside of the lift gate with a

suitable tool.

2. Move the lever toward the direction 쎻A as

illustrated to open the lift gate.

Contact a NISSAN dealer as soon as possible.

Pre-driving checks and adjustments 3-25

墌 06.7.5/Z50-D/V5.0 墍

FUEL-FILLER DOOR

switch once model).

(Intelligent Key

equipped

쐌 Push the passenger side door handle request switch or lift gate request switch twice (Intel- ligent Key equipped model).

To lock, close the fuel-filler door and lock the doors.

SPA1580

OPEN THE FUEL-FILLER DOOR To open the fuel-filler door, unlock it using one of the following operations, then push the right- hand side of the lid 쎻A . 쐌 Push the unlock button on the remote keyless

entry once.

쐌 Insert the key into the door lock cylinder and

turn the door key clockwise twice.

쐌 Push the power door lock switch to the

unlock side.

쐌 Push the driver’s side door handle request

3-26 Pre-driving checks and adjustments

墌 06.7.5/Z50-D/V5.0 墍

FUEL-FILLER CAP The fuel-filler cap is a ratcheting type. Turn the cap counterclockwise 쎻A to remove. To tighten, turn the cap clockwise until ratchet- ing clicks are heard. Put the fuel-filler cap on the cap holder 쎻B while refueling.

WARNING

쐌 Gasoline is extremely flammable and

SPA1581A

highly explosive under certain condi- tions. You could be burned or seri- ously injured if it is misused or mis- handled. Always stop the engine and do not smoke or allow open flames or sparks near the vehicle when refu- eling.

쐌 Fuel may be under pressure. Turn the cap a third of a turn, and wait for any “hissing sound” to stop to prevent fuel from spraying out and possibly causing personal injury. Then remove the cap.

쐌 Do not attempt to top off the fuel tank after the fuel pump nozzle shuts off automatically. Continued refueling may cause fuel overflow, resulting in fuel spray and possibly a fire.

쐌 Use only an original equipment type fuel-filler cap as a replacement. It has a built-in safety valve needed for proper operation of the fuel system and emission control system. An in- correct cap can result in a serious It malfunction and possible injury. could also cause the malfunc- tion indicator light to come on.

쐌 Do not fill a portable fuel container in the vehicle or trailer. Static electricity can cause an explosion of flammable liquid, vapor or gas in any vehicle or trailer. To reduce the risk of serious injury or death when filling portable fuel containers: — Always place the container on the

ground when filling.

— Do not use electronic devices

Pre-driving checks and adjustments 3-27

墌 06.7.5/Z50-D/V5.0 墍

when filling.

— Keep the pump nozzle in contact with the container while you are filling it.

— Use only approved portable fuel

containers for flammable liquid.

쐌 Never pour fuel into the throttle body

to attempt to start your vehicle.

CAUTION

쐌 If fuel is spilled on the vehicle body, flush it away with water to avoid paint damage.

쐌 Tighten until the fuel-filler cap clicks. Failure to tighten the fuel-filler cap mal- properly may cause the function indicator light (MIL) to illu- light illuminates minate. If the because the fuel-filler cap is loose or missing, tighten or install the cap and continue to drive the vehicle. The light should turn off after a few light does

driving trips. If the

3-28 Pre-driving checks and adjustments

STEERING WHEEL

not turn off after a few driving trips, have the vehicle inspected by a NISSAN dealer.

쐌 For additional information, see the “Malfunction indicator light (MIL)” in the “Instruments and controls” sec- tion.

SPA1582

WARNING

쐌 Do not adjust the steering wheel while driving. You could lose control of your vehicle and cause an acci- dent.

쐌 Do not put anything on or near the

steering wheel when tilting.

TILT OPERATION The steering wheel will pop up when the lock

墌 06.7.5/Z50-D/V5.0 墍

PEDAL POSITION ADJUSTMENT (if so equipped)

lever is pulled as illustrated 쎻1 . Keep holding the lock lever and adjust steering wheel to the desired position 쎻2 . Release the lock lever to lock the steering wheel.

the

CAUTION

Do not adjust the pedal position with your foot on the pedal.

SPA1574

The accelerator and brake pedals can be ad- justed for driving comfort. Use the pedal adjusting switch to adjust the brake and accelerator pedal position forward 쎻1
or backward 쎻2 . Pedal adjustment can only be performed when: 쐌 Ignition switch is in the OFF, ACC or LOCK

position, or

쐌 Ignition switch is ON and the selector lever is

in the P (Park) position

The brake and accelerator pedals cannot be adjusted separately.

Pre-driving checks and adjustments 3-29

墌 06.7.5/Z50-D/V5.0 墍

SUN VISORS

MIRRORS

CAUTION

쐌 Do not store the main sun visor be- fore storing the extension sun visor. 쐌 Do not pull the extension sun visor

forcedly downward.

1. To block out glare from the front, swing down

the main sun visor 쎻1 .

2. To block glare from the side, remove the main sun visor from the center mount and swing it to the side 쎻2 .

3. Draw out the extension sun visor 쎻3 from the

main sun visor 쎻4 to block further glare.

SPA1756

INSIDE MIRROR While holding the inside rearview mirror, adjust the mirror angles until the desired position is achieved. The adjusting lever 쎻1 can be operated when the glare from the headlights of the vehicle behind you obstructs your vision at night.

WARNING

Use the night position only when neces- sary, because it reduces rear view clar-

3-30 Pre-driving checks and adjustments

SPA2176

墌 06.7.5/Z50-D/V5.0 墍

ity.

light goes off), and the inside mirror will operate normally. To turn on the system again, push the MIRROR switch once again. For the HomeLink Universal Transceiver and the compass display, see the description in the “2. Instruments and controls” section. Do not hang any object on the mirror or apply glass cleaner. Doing so will reduce the sensitivity of the sensor, resulting in improper operation.

SPA2177

AUTOMATIC ANTI-GLARE INSIDE MIRROR (if so equipped) The inside mirror is designed so that it automati- cally changes reflection according to the inten- sity of the headlights of the vehicle following you.

The anti-glare system will be automatically turned on when you turn the ignition switch to the ON position. When the inside MIRROR switch 쎻A is turned on (The indicator light 쎻B will illuminate), exces- sive glare from the headlights of the vehicle behind you will be reduced. Push the MIRROR switch 쎻A to turn the system off (the indicator

Pre-driving checks and adjustments 3-31

墌 06.7.5/Z50-D/V5.0 墍

selector lever, will operate only when the ignition switch is in the ACC or ON position. Move the switch to right 쎻A or left 쎻B to select the right or left outside mirror, then adjust the mirror to the desired position by pushing the button 쎻C .

SPA1449A

OUTSIDE MIRRORS

WARNING

Objects viewed in the outside mirror on the passenger side are closer than they appear. Be careful when moving to the right. Using only this mirror could cause an accident. Use the inside mirror or glance over your shoulder to properly judge distances to other objects.

The outside mirror switch, located in front of the 3-32 Pre-driving checks and adjustments

SPA1829

Foldable outside mirrors Fold the outside mirror by pushing it toward the rear of the vehicle.

墌 06.7.5/Z50-D/V5.0 墍

AUTOMATIC DRIVE POSITIONER (if so equipped) The automatic drive positioner system has two features: 쐌 Entry/exit function 쐌 Memory storage ENTRY/EXIT FUNCTION This system is designed so that the driver’s seat and outside mirror will automatically move when the selector lever is in the P (Park) position. This allows the driver to get into and out of the driver’s seat more easily.

The driver’s seat will slide backward:

The driver’s seat will slide backward when the driver’s door is opened with the ignition switch (knob) in the LOCK position.

The driver’s seat will return to the previous position: 쐌 When the key is inserted into the ignition switch after closing the driver’s door, or when the driver’s door is closed after inserting the key into the ignition switch.

쐌 The driver’s seat will not return to the previ- ous positions if the seat adjusting switch is operated when the seat is at the exit position. The entry/exit feature can be canceled. See “4. Display screen, heater, air conditioner and audio systems” section of this manual. The entry/exit function can be activated or can- celled by pressing and holding the SET switch for more than 10 seconds while the ignition key is in the LOCK position. The indicator light will blink once when the function is cancelled, and light will blink twice when the the indicator function is activated. the battery cable is disconnected, or if the fuse opens, the entry/exit function will be cancelled. In such a case, after connecting the battery or replacing with a new fuse, open and close the driver’s door more than two times with the ignition key or ignition switch in the LOCK position to activate the entry/exit function.

If

쐌 When the ignition switch is pushed with the (Intelligent Key

closed.

driver’s equipped model)

door

쐌 When the key or ignition switch is turned to

the ON position.

SPA2185

MEMORY STORAGE Two positions for the driver’s seat, pedals (Brake and Accelerator) and outside mirrors can be stored in the automatic drive positioner memory. Follow these procedures to use the memory system.

1. Set the selector lever to the P (Park) position.

2. Adjust the driver’s seat, pedals (Brake and Accelerator) and outside mirrors to the de- sired positions by manually operating each adjusting switch. For additional information, see “Seats” in the “1. Safety — seats, seat belts and supplemental restraint system” Pre-driving checks and adjustments 3-33

墌 06.7.5/Z50-D/V5.0 墍

section and “Pedal position adjustment” and “Outside mirrors” earlier in this section.

3. Turn the ignition ON.

4. Push the SET switch and, within 5 seconds, push the memory switch (1 or 2) fully for at least 1 second.

The indicator light for the pushed memory switch will come on and stay on for approxi- mately 5 seconds after pushing the switch. After the indicator light goes off, the selected positions are stored in the selected memory (1 or 2).

If memory is stored in the same memory switch, the previous memory will be deleted. Linking a remote keyless entry to a stored memory position A remote keyless entry can be linked to a stored memory position with the following procedure. 1. Follow the steps for storing a memory posi-

tion.

for

light

2. While the indicator

the memory switch being set is illuminated for 5 seconds, push the unlock button on the remote keyless entry. The indicator light will blink. After the indicator light goes off, the remote keyless entry is linked to that memory setting.

3-34 Pre-driving checks and adjustments

With the key removed from the ignition switch, push the unlock button on the keyfob. The driver’s seat, pedals (Brake and Accelerator) and outside mirrors will move to the memorized position. Confirming memory storage 쐌 Turn the ignition switch to the ON position and push the SET switch. If the main memory has not been stored, the indicator light will come on for approximately 0.5 seconds. When the memory has stored the position, the indicator light will stay on for approxi- mately 5 seconds.

쐌 If the battery cable is disconnected, or if the fuse opens, the memory will be canceled. In this case, reset the desired position using the previous procedure.

쐌 If a new memory is stored,

the previous memory and link will be erased. In this case, reset the desired position and link using the previous procedure.

Selecting the memorized position 1. Set the selector lever to the P (Park) position. 2. Turn the ignition ON. 3. Push the memory switch (1 or 2) fully for at

least 1 second.

The driver’s seat, pedals (Brake and Accel- erator) and outside mirrors will move to the memorized position with the indicator light flashing, and then the light will stay on for approximately 5 seconds. SYSTEM OPERATION The automatic drive positioner system will not work or will stop operating under the following conditions: 쐌 when the vehicle speed is above 4 MPH (7

km/h).

쐌 when the adjusting switch for the driver’s seat, pedals and outside mirror are operated while the automatic drive positioner is oper- ating.

쐌 when the memory switch (1 or 2) and the least 1

SET switch is not pushed for at second.

쐌 when the seat, pedals and outside mirror have been already moved to the memorized positions.

쐌 when no seat, pedals and outside mirror positions are stored in the memory switch. 쐌 when the engine is started while moving the

automatic drive positioner.

쐌 when the selector lever is moved from the P

墌 06.7.5/Z50-D/V5.0 墍

position to any other position (However, it will not be cancelled if the switch is pushed while the seat is returning to the previous positions (entry/exit function).).

Pre-driving checks and adjustments 3-35

墌 06.7.5/Z50-D/V5.0 墍

MEMO

3-36 Pre-driving checks and adjustments

墌 06.7.5/Z50-D/V5.0 墍

4 Display screen, heater, air conditioner and

audio systems

Safety note .............................................................................. 4-2
Control panel buttons — without navigation system.... 4-2
How to use joystick and “ENTER” button................. 4-3
How to use “BACK” button .......................................... 4-3
How to use “TRIP” button............................................. 4-3
How to use “FUEL ECON” button.............................. 4-3
Clock ................................................................................... 4-4
How to use “E/M” button .............................................. 4-4
How to use “MAINT” (Maintenance) button ............. 4-4
Maintenance notice ......................................................... 4-5
How to use “SETTING” button .................................... 4-6
“DAY/NIGHT” button.................................................... 4-10
Control panel buttons — with navigation system ....... 4-11
How to use joystick and “ENTER” button .............. 4-11
How to use “BACK” button........................................ 4-11
Setting up the start-up screen................................... 4-12
How to use the “TRIP” button ................................... 4-12
Maintenance notice....................................................... 4-14
How to use the “SETTING” button .......................... 4-15
“DAY/NIGHT” button.................................................... 4-19
RearView Monitor (if so equipped)................................. 4-19
How to read the displayed lines................................ 4-20

RearView Monitor setting ............................................ 4-20
Operating tips................................................................. 4-20
Ventilators.............................................................................. 4-21
Heater and air conditioner (Automatic) ......................... 4-23
Automatic operation...................................................... 4-24
Manual operation ........................................................... 4-25
Operating tips................................................................. 4-25
In-cabin microfilter......................................................... 4-26
Servicing air conditioner.................................................... 4-26
Audio system ........................................................................ 4-27
FM radio reception........................................................ 4-27
AM radio reception ....................................................... 4-28
Satellite radio reception............................................... 4-28
Audio operation precautions....................................... 4-28
FM-AM-SAT radio with CD player .......................... 4-34
FM-AM-SAT radio with cassette player and CD changer ............................................................................ 4-38
CD care and cleaning .................................................. 4-43
Steering switch for audio control (if so equipped)......................................................................... 4-43
Antenna ............................................................................ 4-44
Car phone or CB radio .................................................... 4-45

墌 06.7.5/Z50-D/V5.0 墍

SAFETY NOTE

CONTROL PANEL BUTTONS — WITHOUT NAVIGATION SYSTEM

WARNING

쐌 Do not disassemble or modify this system. If you do, it may result in accidents, fire, or electrical shock.

쐌 Do not use this system if you notice any abnormality, such as a frozen screen or lack of sound. Continued use of the system may result in acci- dent, fire or electric shock.

쐌 In case you notice any foreign object in the system hardware, spill liquid on it, or notice smoke or smell com- ing from it, stop using the system immediately and contact a NISSAN dealer. Ignoring such conditions may lead to accidents, fire, or electrical shock.

1. “TRIP” button

2. “FUEL ECON” button

3. Clock adjust button

4. “TRIP RESET” button

SAA1352

5. “E/M” button

6. “DAY/NIGHT” button

7. “BACK” button

8. JOYSTICK and “ENTER” button

4-2 Display screen, heater, air conditioner and audio systems

墌 06.7.5/Z50-D/V5.0 墍

9. “SETTING” button 10. “MAINT” maintenance button Make sure the engine is running before using this system. If you use the system with the engine not running (ignition ON or ACC) for a long time, it will use up all the battery power, and the engine will not start. HOW TO USE JOYSTICK AND “ENTER” BUTTON Choose an item on the display using the joystick. Push the “ENTER” button only when the use of it is instructed on the display. HOW TO USE “BACK” BUTTON Finish setup: If you push the “BACK” button after the setup is completed, the display will return to the previous screen.

SAA1317

SAA1318

HOW TO USE “TRIP” BUTTON When the “TRIP” button is pushed, the following modes will display on the screen. TRIP 1 (TIME, DIST, AVG) → TRIP 2 (TIME, DIST, AVG) → OFF Elapsed Time, Driving Distance and Average Speed will be displayed. To reset, select the “Reset” key using the joy- stick and push the “ENTER” button, or push the “TRIP RESET” or “TRIP” button for more than approximately 1.5 seconds.

HOW TO USE “FUEL ECON” BUTTON Average Fuel Economy and Distance to Empty will be displayed for reference when the “FUEL ECON” button is pushed. To reset, select the “Reset” key using the joy- stick and push the “ENTER” button, or push the “TRIP RESET” or “TRIP” button for more than approximately 1.5 seconds.

Display screen, heater, air conditioner and audio systems 4-3

墌 06.7.5/Z50-D/V5.0 墍

To finish the adjusting, push the “BACK” button or the screen will return to normal after 10
seconds. The clock can be adjusted on the setting display. See the “HOW TO USE “SETTING” BUTTON” later in this section. HOW TO USE “E/M” BUTTON You can change the unit as follows using the “E/M” (English/Metric) button. Unit: US — Mile, °F, MPG

Metric — km, °C, L/100 km

SAA1353

CLOCK The digital clock displays time when the ignition switch is in ACC or ON. If the battery cable is disconnected, the clock will not indicate the correct time. Readjust the time. Adjusting the time To adjust the time, push the “H” or “M” button for more than approximately 1.5 seconds. The time indicator will flash. Push the H button to adjust the hour. Push the M button to adjust the minute. 4-4 Display screen, heater, air conditioner and audio systems

SAA1319

HOW TO USE “MAINT” (Maintenance) BUTTON Maintenance and tire pressure information (if so equipped) will be displayed when the “MAINT” button is pushed.

To display the setting of the maintenance inter- val, select the “Engine Oil” or “Tire Rotation” key using the joystick and push the “ENTER” button.

the maintenance interval, select

To set the “Maintenance Schedule” key by using the joy- stick and move the joystick to the right or left.

To reset the maintenance interval, select the

墌 06.7.5/Z50-D/V5.0 墍

The “MAINTENANCE NOTICE” screen displays each time the key is turned ON until one of the following conditions are met: 쐌 “RESET” is selected. 쐌 “Display Maintenance Notification” is set

OFF.

쐌 the maintenance interval is set again.

SAA1320

SAA1354

“Reset” key using the joystick and push the “ENTER” button. To display the MAINTENANCE NOTICE, auto- matically when setting trip distance is reached, select the “Display Maintenance Notification” key and push the “ENTER” button.

MAINTENANCE NOTICE The “MAINTENANCE NOTICE” screen (“EN- GINE OIL” or “TIRE ROTATION”) will be auto- matically displayed as shown when both of the following conditions are met: 쐌 the vehicle is driven the set distance and the

ignition switch is turned OFF.

쐌 the ignition key is turned ON the next time the

vehicle will be driven.

To return to the previous display after the “MAINTENANCE NOTICE” screen is displayed, push the “BACK” button.

Display screen, heater, air conditioner and audio systems 4-5

墌 06.7.5/Z50-D/V5.0 墍

TIRE or CHECK ALL TIRE) is displayed on the screen: FLAT TIRE — Check All Tires.

WARNING

쐌 When a spare tire is mounted or a wheel is replaced, tire pressure will not be indicated, the Tire Pressure Monitoring System (TPMS) will not function and the low tire pressure warning light will flash for approxi- mately 1 minute and remain on after the 1 minute. Contact your NISSAN dealer as soon as possible for tire replacement and/or system reset- ting.

쐌 Replacing tires with those not origi- nally specified by NISSAN could af- fect the TPMS.

the proper operation of

SAA1321

Tire pressure information (if so equipped) Pressure indication in ** psi on the screen indicates that the pressure is being measured. After a few driving trips, the pressure for each tire will be displayed randomly. The order of tire pressure figures displayed on the screen does not correspond with the actual order of the tire position. Tire pressure rises and falls depending on the heat caused by the vehicle’s traveling condition and the temperature. In case of low tire pressure, a message (FLAT 4-6 Display screen, heater, air conditioner and audio systems

SAA1355

HOW TO USE “SETTING” BUTTON The SETTINGS screen will appear when the “SETTING” button is pushed.

墌 06.7.5/Z50-D/V5.0 墍

Display Off: To turn off the screen, push the “SETTING” button and select the “Display” key and “Display Off” key. The indicator of the “Display Off” will turn on. When any mode button is pushed with the screen off, the screen turns on for further operation. The screen will turn off automatically 5
seconds after the operation is finished. To turn on the screen, push the “SETTING” button and select the “Display” key and “Display Off” key, then set the screen to on by pushing the “ENTER” button. Setting Audio or HVAC display: Choose the “Audio” or “HVAC” (Heater and air conditioner) key to be displayed at the bottom, by using the joystick. The audio or HVAC (heater, air conditioner) setting condition will normally appear on the screen. To return to the setting screen, push the “SETTING” button or “BACK” button.

SAA1550

“Display” settings The DISPLAY SETTINGS screen will appear when selecting the “Display” key and pushing the “ENTER” button. Brightness/Contrast: To adjust the brightness and contrast of the screen, select the “Brightness/Contrast” key and push the “ENTER” button. Then you can adjust the brightness to Darker or Brighter, the contrast to Lower or Higher using the joystick.

SAA1357

Vehicle electronic systems The VEHICLE ELECTRONIC SYSTEMS screen will appear when selecting the “Vehicle Elec- tronic Systems” key with the joystick and push- ing the “ENTER” button. You can set operating conditions. To set an operating condition, select the appli- cable item using the joystick, and push the “ENTER” button. The indicator light alternately turns on and off each time the “ENTER” button is pushed. Indicator light is illuminated. — ON

the various electronic systems

Display screen, heater, air conditioner and audio systems 4-7

墌 06.7.5/Z50-D/V5.0 墍

the Intelligent Key to return to the previ- ous mode.

Auto Re-Lock Time:

The length of the auto door re-lock time can be set. Select the “Auto Re-Lock Time” key, then move the joystick and push the ENTER button to adjust the time. Sensitivity of Automatic Headlights:

Automatic light illumination can be set as de- sired.

Select the “Sensitivity of Automatic Headlights” key, then move the joystick to the left (lower) or right (higher). Automatic Headlights Off Delay:

You can control how long it takes the automatic turn off timer to extinguish the headlights in the AUTO position.

Select the “Automatic Headlights Off Delay” key, then move the joystick to the left or right to adjust the timer. Speed Dependent Wiper:

When this item is turned to on, the wiper interval is adjusted automatically according to the ve- hicle speed.

SAA1548

SAA1549

Indicator light is not illuminated. — OFF Adjust driver seat when exiting vehicle: The driver’s seat automatically moves back and returns to the original position for ease of exit and entry. Selective door unlock: This key can switch the unlock doors of the 1st unlocking operation as follows: ON (Only the driver side door) ←→ OFF (All the doors)

Keyless Remote Response — Horn*:

This key changes the horn chirp mode that occurs when pushing the LOCK button on the keyfob or the Intelligent Key. Keyless Remote Response — Lights*:

This key changes the hazard indicator flash mode that occurs when pushing the LOCK or UNLOCK button on the keyfob or the Intelligent Key. * Even if you change the horn chirp or the hazard flash with the keyfob or the Intel- ligent Key, the change may not be re- flected in the display. Use the keyfob or

4-8 Display screen, heater, air conditioner and audio systems

墌 06.7.5/Z50-D/V5.0 墍

Intelligent Key Lock Response — Sound (if so equipped): The sound pattern of the Intelligent request switch operation can be set as desired. Select the “Intelligent Key lock response — Sound” key, then push the ENTER button to change the sound pattern. Intelligent Key Unlock Response — Beep Sound (if so equipped): The beep sounds when unlocking door with the Intelligent request switch can be turned on or off. Return All Settings to Default: When this key is selected and turned on using the “ENTER” button, all settings made by VEHICLE ELECTRONICS will return to the initial conditions.

SAA1327

SAA1353

System settings Language/Unit: The LANGUAGE/UNIT screen will appear when selecting the “Language/Unit” key and pushing the “ENTER” button. Language: English or French Unit: US — Mile, °F, MPG

Metric — km, °C, L/100 km

You can select the language and unit using the joystick and “ENTER” button.

Clock: Adjusting the time Select the “Hours” or “Minutes” key and move the joystick to the right or left to adjust the time. The time will change step by step. After completion of the setting, push the “BACK” button.

Display screen, heater, air conditioner and audio systems 4-9

墌 06.7.5/Z50-D/V5.0 墍

“DAY/NIGHT” BUTTON Pushing the “DAY/NIGHT” button will change the display to the DAY or NIGHT display. Then, adjust the brightness moving the joystick right or left. If no operation is done within 10 seconds, or if the “BACK” button is pushed, the display will return to the previous display. Pushing the “DAY/NIGHT” button for more than approximately 2 seconds will turn the display off and on.

4-10 Display screen, heater, air conditioner and audio systems

墌 06.7.5/Z50-D/V5.0 墍

CONTROL PANEL BUTTONS — WITH NAVIGATION SYSTEM

1. “DAY/NIGHT” button 2. “BACK” button 3. Joystick and “ENTER” button 4. “SETTING” button 5. “TRIP” button 쎻A : For Navigation system control buttons; refer to the separate Navigation System Owner’s Manual.

When you use this system, make sure the engine is running. If you use the system with the engine not running (ignition ON or ACC) for a long time, it will use up all the battery power, and the engine will not start. HOW TO USE JOYSTICK AND “ENTER” BUTTON Choose an item on the display using the joystick and push the “ENTER” button for operation. HOW TO USE “BACK” BUTTON This has two functions. 쐌 Go back to the previous display (cancel). If you push the “BACK” button during setup, the setup will be canceled and/or the display will return to the previous screen.

SAA1316

Display screen, heater, air conditioner and audio systems 4-11

墌 06.7.5/Z50-D/V5.0 墍

HOW TO USE THE “TRIP” BUTTON When the “TRIP” button is pushed, the following modes will display on the screen. Warning message (if there are any) → TRIP 1 → TRIP 2 → FUEL ECONOMY → MAINTE- NANCE.

쐌 Finish setup. If you push the “BACK” button after the setup is completed, the setup will start over, and the display will return to the climate control or Audio mode, and Navigation screen. SETTING UP THE START-UP SCREEN When you turn the ignition switch to ACC, the SYSTEM START-UP warning is displayed on the screen. Read the warning and select the “I AGREE” (English) or “ENTER” (Franc¸ ais) key then push the “ENTER” button. If you do not push the “ENTER” button, this system will not proceed to the next step display. If you do not push the button or select the screen key for more than 1 minute on the TRIP, SETTING or START-UP screen, the screen will change to TRIP screen automatically. To proceed to the next step, refer to the separate Navigation System Owner’s Manual.

SAA1317

“TRIP” information Elapsed Time, Driving Distance and Average Speed will be displayed. To reset, select the “Reset” key using the joy- stick and push the “ENTER” button or push the “TRIP” button for more than approximately 1.5
seconds.

4-12 Display screen, heater, air conditioner and audio systems

墌 06.7.5/Z50-D/V5.0 墍

SAA1318

SAA1319

SAA1320

“FUEL ECONOMY” information Average Fuel Economy and Distance to Empty will be displayed for reference. To reset, select the “Reset” key using the joy- stick and push the “ENTER” button or push the “TRIP” button for more than approximately 1.5
seconds.

“MAINTENANCE” information You can set the engine oil and the tire rotation interval. And the tire pressure will appear on the screen (if the tire pressure system is equipped). To display the setting of the maintenance inter- val, select the “Engine Oil” or “Tire Rotation” key using the joystick and push the “ENTER” button.

the maintenance interval, select

the To set “Maintenance Schedule” key by using the joy- stick and move the joystick to the right or left. To reset the maintenance interval, select the “Reset” key using the joystick and push the “ENTER” button. To display the MAINTENANCE NOTICE, auto- matically when setting trip distance is reached, select the “Display Maintenance Notification” key and push the “ENTER” button.

Display screen, heater, air conditioner and audio systems 4-13

墌 06.7.5/Z50-D/V5.0 墍

The “MAINTENANCE NOTICE” screen displays each time the key is turned ON until one of the following conditions are met: 쐌 “RESET” is selected. 쐌 “Display Maintenance Notification” is set

OFF.

쐌 the maintenance interval is set again.

SAA1354

MAINTENANCE NOTICE The “MAINTENANCE NOTICE” screen (“EN- GINE OIL” or “TIRE ROTATION”) will be auto- matically displayed as shown when both of the following conditions are met: 쐌 the vehicle is driven the set distance and the

ignition switch is turned OFF.

쐌 the ignition key is turned ON the next time the

vehicle will be driven.

To return to the previous display after the “MAINTENANCE NOTICE” screen is displayed, push the “BACK” button.

4-14 Display screen, heater, air conditioner and audio systems

SAA1321

Tire pressure information (if so equipped) To view “TIRE PRESSURE” information, push the “TRIP” button repeatedly until the “MAINTE- NANCE” screen is displayed. Select “TIRE PRESSURE” using the joystick and push the “ENTER” button.

Pressure indication in ** psi on the screen indicates that the pressure is being measured. After a few driving trips, the pressure for each tire will be displayed randomly.

The order of tire pressure figures displayed on the screen does not correspond with the actual

墌 06.7.5/Z50-D/V5.0 墍

order of the tire position. Tire pressure rises and falls depending on the heat caused by the vehicle’s traveling condition and the temperature. In case of displayed on the screen: FLAT TIRE — low tire air pressure.

low tire pressure, a message is

WARNING

쐌 When a spare tire is mounted or a wheel is replaced, tire pressure will not be indicated, the TPMS will not function and the low tire pressure warning light will flash for approxi- mately 1 minute and remain on after the 1 minute. Contact your NISSAN dealer as soon as possible for tire replacement and/or system reset- ting.

쐌 Replacing tires with those not origi- nally specified by NISSAN could af- fect the TPMS.

the proper operation of

SAA1322

SAA1551

* — Refer to the separate Navigation System Owner’s Manual. HOW TO USE THE “SETTING” BUTTON The SETTINGS screen will appear when the “SETTING” button is pushed.

“Display” settings The DISPLAY SETTINGS screen will appear when selecting the “Display” key and pushing the “ENTER” button. Brightness/Contrast: To adjust the brightness and contrast of the screen, select the “Brightness/Contrast” key and push the “ENTER” button. Then you can adjust the brightness to Darker or Brighter, the contrast to Lower or Higher using the joystick.

Display screen, heater, air conditioner and audio systems 4-15

墌 06.7.5/Z50-D/V5.0 墍

Display Off: To turn off the screen, push the “SETTING” button and select the “Display” key and “Display Off” key. The indicator of the “Display Off” will turn on. When any mode button is pushed with the screen off, the screen turns on for further operation. The screen will turn off automatically 5
seconds after the operation is finished on the map display in the Audio, HVAC (Heater and air conditioner). To turn on the screen, push the “SETTING” button and select the “Display” key and “Display Off” key, then set the screen to on by pushing the “ENTER” button. Setting Audio or HVAC display: Choose the “Audio” or “HVAC” (Heater and air conditioner) key to be displayed at the bottom, by using the joystick. The audio or HVAC (heater, air conditioner) setting condition will normally appear on the screen. To return to the setting screen, push the “SETTING” button or “BACK” button.

SAA1324

SAA1552

Indicator light is not illuminated. — OFF Selective door unlock: This key can switch the unlock doors of the 1st unlocking operation as follows: ON (Only the driver side door) ←→ OFF (All the doors)

Vehicle electronic systems The VEHICLE ELECTRONIC SYSTEMS screen will appear when selecting the “Vehicle Elec- tronic Systems” key with the joystick and push- ing the “ENTER” button.

the various electronic systems

You can set operating conditions. To set an operating condition, select the appli- cable item using the joystick, and push the “ENTER” button. The indicator light alternately turns on and off each time the “ENTER” button is pushed. Indicator light is illuminated. — ON

4-16 Display screen, heater, air conditioner and audio systems

墌 06.7.5/Z50-D/V5.0 墍

Intelligent Key Lock Response — Sound (if so equipped): The sound pattern of the Intelligent request switch operation can be set as desired. Select the “Intelligent Key lock response — Sound” key, then push the ENTER button to change the sound pattern. Intelligent Key Unlock Response — Beep Sound (if so equipped): The beep sounds when unlocking door with the Intelligent request switch can be turned on or off. Return All Settings to Default: When this key is selected and turned on using the “ENTER” button, all settings made by VEHICLE ELECTRONICS will return to the initial conditions.

the Intelligent Key to return to the previ- ous mode.

Auto Re-Lock Time:

The length of the auto door re-lock time can be set. Select the “Auto Re-Lock Time” key, then move the joystick and push the ENTER button to adjust the time. Sensitivity of Automatic Headlights:

Automatic light illumination can be set as de- sired.

Select the “Sensitivity of Automatic Headlights” key, then move the joystick to the left (lower) or right (higher). Automatic Headlights Off Delay:

You can control how long it takes the automatic turn off timer to extinguish the headlights in the AUTO position.

Select the “Automatic Headlights Off Delay” key, then move the joystick to the left or right to adjust the timer. Speed Dependent Wiper:

When this item is turned to on, the wiper interval is adjusted automatically according to the ve- hicle speed.

Display screen, heater, air conditioner and audio systems 4-17

墌 06.7.5/Z50-D/V5.0 墍

SAA1553

Keyless Remote Response — Horn*:

This key changes the horn chirp mode that occurs when pushing the LOCK button on the keyfob or the Intelligent Key. Keyless Remote Response — Lights*:

This key changes the hazard indicator flash mode that occurs when pushing the LOCK or UNLOCK button on the keyfob or the Intelligent Key. * Even if you change the horn chirp or the hazard flash with the keyfob or the Intel- ligent Key, the change may not be re- flected in the display. Use the keyfob or

ON: The displayed time advances by one hour. OFF: The current time is displayed. Adjusting the time to the GPS Select the “Auto Adjust” key. The time will be reset to the GPS time.

SAA1327

SAA1328

System settings Language/Unit: The LANGUAGE/UNIT screen will appear when selecting the “Language/Unit” key and pushing the “ENTER” button. Language: English or French Unit: US — Mile, °F, MPG

Metric — km, °C, L/100 km

You can select the language and unit using the joystick and “ENTER” button.

Clock:

Adjusting the time

Select the “Hours” or “Minutes” key and move the joystick to the right or left to adjust the time.

The time will change step by step.

After completion of the setting, push the “BACK” button. Setting daylight saving time

Turn ON or OFF daylight saving time.

Every time the “Daylight Saving Time” key is selected, the light turns ON and OFF alternately.

4-18 Display screen, heater, air conditioner and audio systems

墌 06.7.5/Z50-D/V5.0 墍

쐌 “Newfoundland” zone After selection, the CLOCK SETTINGS screen will appear. The GPS time (manual time) corresponding to the selected zone will be displayed. “Pacific” zone has been set as the initial (default) setting. Beep setting: When Beep setting is on (indicator light on), a beep will sound if any audio button is pushed. “DAY/NIGHT” BUTTON Pushing the “DAY/NIGHT” button will change the display to the DAY or NIGHT display. Then, adjust the brightness moving the joystick right or left. If no operation is done within 10 seconds, or if the “BACK” button is pushed, the display will return to the previous display. Pushing the “DAY/NIGHT” button for more than approximately 2 seconds will turn the display off and on.

REARVIEW MONITOR (if so equipped) When the selector lever is shifted into the R (Reverse) position, the monitor display shows view to the rear of the vehicle.

The system is designed as an aid to the driver in detecting large stationary objects to help avoid damaging the vehicle. The system will not detect small objects below the bumper and may not detect objects close to the bumper or on the ground.

WARNING

쐌 The rear view camera is a conve- nience but it is not a substitute for proper backing. Always turn and check that it is safe to do so before backing up. Always back up slowly. 쐌 Objects viewed in the RearView Monitor differ from actual distance because a wide-angle lens is used. Objects in the RearView Monitor will appear visually opposite like ones