2012 Nissan Maxima Owners Manual

volume.

WHA1364

1. 2. 3. 4.

CD eject button

VOL/ON·OFF control knob Station select (1 - 6) buttons TUNE/FOLDER and AUDIO control knob (Bass, Treble, Fade and Balance) AUX button*

TRACK button SEEK/CAT button DISC button RPT/RDM button

6. 7. 8. 9. 10. SCAN button 11. FM·AM button

5. 4-68 Monitor, climate, audio, phone and voice recognition systems

This vehicle has Speed Sensitive Volume (SSV) for audio. The audio volume changes as the driv- ing speed changes. AUDIO control knob (Bass, Treble, Bal- ance and Fade): Press the AUDIO control knob to change the mode as follows: Bass → Treble → Balance → Fade To adjust Bass, Treble, Balance and Fade, press the AUDIO control knob until the desired mode appears in the display. Turn the tuning knob to adjust Bass and Treble to the desired level. You can also use the tuning knob to adjust Fade and Balance modes. Fade adjusts the sound level between the front and rear speakers and Balance adjusts the sound between the right and left speakers. Once you have adjusted the sound quality to the desired level, press the AUDIO control knob re- peatedly until the radio or CD display reappears. If the control knob is not pressed for approxi- mately 10 seconds, the radio or CD display will automatically reappear.

LHA1304

Speed Sensitive Volume (SSV): To change the SSV mode from OFF to 5, press the SETTING button. Then select the “Audio” key using the NISSAN controller; the audio settings screen will be displayed. Select the “–” key or “+” key to change the SSV. While in this screen you can also adjust the other audio settings by selecting the corresponding key. Once you have adjusted the sound quality to the desired level, press the BACK button.

LHA1314
For information on how to use the NISSAN con- troller, see “How to use the NISSAN controller” in this section. Clock operation For additional information on setting the clock, see “Adjusting the time” in this section.

Monitor, climate, audio, phone and voice recognition systems 4-69

Press the BACK button to exit the CD text display screen. FM/AM/SAT radio operation FM/AM band select:

Pressing the FM·AM button will change the band as follows: AM → FM1 → FM2 → AM When the FM·AM button is pressed while the ignition switch is in the ACC or ON position, the radio will come on at the station last played. The last station played will also come on when the VOL/ON·OFF control knob is pressed ON. If a compact disc is playing when the FM·AM button is pressed, the compact disc will auto- matically be turned off and the last radio station played will come on. The FM stereo indicator ST will illuminate during FM stereo reception. When the stereo broadcast signal is weak, the radio will automatically change from stereo to monaural reception. XM band select: Pressing the AUX button will change the band as follows: USB → XM1* → XM2* → XM3* → AUX → USB (satellite, if so equipped)

WHA0949

WHA0950
● Album displays the ID3 encoded tag of the

CD/MP3 display mode

While listening to a CD or an MP3/WMA CD, certain text might be able to be displayed (when CD encoded with text is being used).

Depending on how the CD or MP3/WMA CD is encoded, the following text might be able to be displayed by selecting the “Text” key: ● Folder displays the name of

the current

folder being accessed.

● File displays the name of the file currently

playing.

● Song displays the ID3 encoded tag of the

song name.

album name.

● Artist displays the ID3 encoded tag of the

artist’s name.

● Disc displays the disc name of the CD cur-

rently playing.

● Track displays the name of the song on the

CD currently playing.

Some of this text or modes might not display while playing a regular CD. Select the “Menu” key with the NISSAN controller, then select the “Text” key to display the text for the CD.

4-70 Monitor, climate, audio, phone and voice recognition systems

When the AUX button is pressed while the igni- tion switch is in the ACC or ON position, the radio will come on at the station last played.

The last station played will also come on when the VOL/ON·OFF control knob is pressed ON.

*When the AUX button is pressed, the satellite radio mode will be skipped unless an optional satellite receiver and antenna are installed and an XM姞 satellite radio service subscription is active. Satellite radio is not available in Alaska, Hawaii and Guam.

If a compact disc is playing when the AUX button is pressed, the compact disc will automatically be turned off and the last radio station played will come on. TUNE/FOLDER (Tuning) knob:

To manually TUNE/FOLDER knob to the right or left.

radio,

tune

the

turn

the

SEEK/CAT and TRACK tuning buttons:

Press the SEEK/CAT the button to tune from high to low or TRACK low to high frequencies and stop at the next broadcasting station.

button or

SCAN tuning:

Press the SCAN button to stop at each broad- casting station for 5 seconds. Pressing the SCAN button again during this five second pe- riod will stop scan tuning and the radio will remain tuned to that station. If the SCAN button is not pressed within 5 seconds, scan tuning moves to the next station. 1 to 6 Station memory operations:

Six stations can be set for the AM band. Twelve stations can be set for the FM band (6 for FM1, 6
for FM2). Eighteen stations can be set for the XM band (6 for XM1, 6 for XM2, 6 for XM3).

1. Choose the radio band AM, FM1 or FM2
using the FM·AM select button. Or choose the satellite band SAT1 or SAT2 using the AUX button.

2. Tune to the desired station using manual, SEEK or SCAN tuning. Press and hold any of the desired station memory buttons (1 – 6) until a beep sound is heard.

3. The channel indicator will then come on and the sound will resume. Programming is now complete.

4. Other buttons can be set in the same man-

ner.

If the battery cable is disconnected, or if the fuse opens, the radio memory will be canceled. In that case, reset the desired stations. Radio data system (RDS):

RDS stands for Radio Data System, and is a data information service transmitted by some radio stations on the FM band (not AM band). Cur- rently, most RDS stations are in large cities, but many stations are now considering broadcasting RDS data.

RDS can display: ● Station call sign, such as “WHFR 98.3”. ● Station name, such as “The Groove”. ● Music or programming type such as “Clas-

sical”, “Country”, or “Rock”.

When the “Text” key is selected with the NISSAN controller on the display while the radio is playing, additional information is displayed on the screen.

If the station broadcasts RDS information, the RDS icon is displayed. Compact disc (CD) player operation Place the ignition in the ACC or ON position and insert the compact disc into the slot with the label side facing up. The compact disc will be guided automatically into the slot and start playing.

Monitor, climate, audio, phone and voice recognition systems 4-71

If the radio is already operating, it will automati- cally turn off and the compact disc will play.

disc was

If the system has been turned off while the com- pact the VOL/ON·OFF control knob will start the compact disc. DISC button:

pressing

playing,

When the DISC button is pressed with the sys- tem off and a compact disc loaded, the system will turn on and the compact disc will start to play.

When the DISC button is pressed with a com- pact disc loaded with the radio playing, the radio will automatically be turned off and the compact disc will start to play.

SEEK/CAT and TRACK buttons:

When the SEEK/CAT button is pressed while a compact disc is playing, the track being played returns to its beginning. Press several times to skip back through tracks. The compact disc will go back the number of times the button is pressed.

vance the number of times the button is pressed. (When the last track on the compact disc is skipped through, the first track will be played.)

The NISSAN controller can also be used to se- lect tracks when a CD is playing.

SEEK/CAT and TRACK (Rewind and Fast For- ward) buttons:

Press and hold the SEEK/CAT (rewind) button or the TRACK (fast forward) button while a compact disc is playing; the compact disc will play while rewinding or fast forwarding. When the button is released, the compact disc will return to normal play speed. TUNE/FOLDER knob While playing an MP3/WMA CD, turn the TUNE/FOLDER knob right or left to scan forward or backward through available folders. RPT/RDM button: When the RPT/RDM button is pressed while the compact disc is playing, the play pattern can be changed as follows: CD: Repeat All → 1 Track Repeat → 1 Disc Random → Repeat All

button is pressed while When the TRACK a compact disc is playing, the next track will start to play from its beginning. Press several times to skip through tracks. The compact disc will ad- 4-72 Monitor, climate, audio, phone and voice recognition systems

CD with compressed audio files: Repeat All → 1 Folder Repeat → 1 Track Repeat → 1 Disc Random → 1 Folder Random → Re- peat All Repeat All: Normal play mode. All tracks will constantly play in sequential order. 1 Folder Repeat: The folder that is currently being accessed will be repeated. 1 Track Repeat: The track that is currently playing will be repeated. 1 Disc Random: The tracks on the disc that is currently playing will be played in a mixed order. 1 Folder Random: The tracks in the folder that is currently playing will be played in a mixed order.

CD EJECT button:

When the pact disc loaded, ejected.

button is pressed with the com- the compact disc will be

button is pressed while the When the compact disc is being played, the compact disc will eject and the system will turn off.

Before connecting a device to the auxiliary input jacks, turn off the power of the portable device. With a compatible device connected to the aux- iliary input jacks, press the AUX button until the AUX mode appears in the display. The output from the device will be played through the display (when the vehicle is in the (P) Park position and the parking brake engaged) and audio system.

LHA1367

AUX settings Select the “Settings” key using the NISSAN con- troller and press the ENTER button. Choose one of the display modes by selecting the “ ● Normal ● Wide ● Cinema

” key or the “

” key:

Monitor, climate, audio, phone and voice recognition systems 4-73

LHA2031

AUX (auxiliary) input jacks

The auxiliary input jacks are located inside the center console 䊊1 . NTSC compatible devices such as video games, camcorders and portable video players can be connected to the auxiliary input jacks. Audio devices, such as some MP3
players, can also be connected to the system through the auxiliary input jacks. The auxiliary input jacks are color coded for iden- tification purposes: ● Red – right channel audio input ● White – left channel audio input ● Yellow – video input

Additional features For more information about the iPod姞 player available with this system, see “iPod姞 player op- eration without Navigation System” in this sec- tion. For more information about the USB interface available with this system, see “USB interface (models without Navigation System)” in this sec- tion. For more information about the Music Box姞 fea- ture available with this system, see “Music Box姞 without Navigation System” in this section.

1. 2. 3. 4.

5.

CD eject button

VOL/ON·OFF control knob Station select (1 - 6) buttons TUNE/FOLDER and AUDIO control knob (Bass, Treble, Fade and Balance) DISC·AUX button

TRACK button SEEK/CAT button SAT* button RPT/RDM button

6. 7. 8. 9. 10. SCAN button 11. FM·AM button

WHA1365

4-74 Monitor, climate, audio, phone and voice recognition systems

*No satellite radio reception is available when the SAT button is pressed to ac- cess satellite radio stations unless op- tional satellite receiver and antenna are installed and an XM姞 satellite radio ser- vice subscription is active. Satellite ra- dio is not available in Alaska, Hawaii and Guam.

FM/AM/SAT RADIO WITH CD/DVD PLAYER (if so equipped) For all operation precautions, see ⬙Audio opera- tion precautions⬙ in this section. Audio main operation VOL/ON·OFF control:

Place the ignition switch in the ACC or ON position and push the VOL/ON·OFF control knob while the system is off to call up the mode that was playing immediately before the system was turned off.

To turn the system off, press the VOL/ON·OFF control knob.

Turn the VOL/ON·OFF control knob to adjust the volume.

This vehicle has Speed Sensitive Volume (SSV) for audio. The audio volume changes as the driv- ing speed changes. AUDIO control knob (Bass, Treble, Bal- ance and Fade): Press the AUDIO control knob to change the mode as follows: Bass → Treble → Balance → Fade To adjust Bass, Treble, Balance and Fade, press the AUDIO control knob until the desired mode appears in the display. Turn the tuning knob to adjust Bass and Treble to the desired level. You can also use the tuning knob to adjust Fade and Balance modes. Fade adjusts the sound level between the front and rear speakers and Balance adjusts the sound between the right and left speakers. Once you have adjusted the sound quality to the desired level, press the AUDIO control knob re- peatedly until the radio or CD display reappears. If the control knob is not pressed for approxi- mately 10 seconds, the radio or CD display will automatically reappear.

LHA1236

Speed Sensitive Volume (SSV):

To change the SSV mode from OFF to 5, press the SETTING button. Then select the “Audio” key using the NISSAN controller, then press the EN- TER button; the audio settings screen will be displayed. Select the “–” key or “+” key to change the SSV.

While in this screen you can also adjust the other audio settings by selecting the corresponding key.

Once you have adjusted the sound quality to the desired level, press the BACK button.

Monitor, climate, audio, phone and voice recognition systems 4-75

LHA1256
For information on how to use the NISSAN con- troller, see “How to use the NISSAN controller” in this section.

LHA1257

LHA1258

Display album cover art: When an audio source encoded with album cover art is played, the album cover art can be displayed on the screen. To toggle this feature on or off, touch the “Display Album Cover Art” key. When the feature is activated, the amber indica- tor next to the word ON will illuminate.

CD, DVD or USB with compressed audio files

While listening to a CD or compressed audio files, certain text might be able to be displayed (when CD encoded with text is being used).

Depending on how the CD or compressed audio files are encoded, the following text might be displayed: ● Folder displays the name of

the current

folder being accessed.

● File displays the name of the file currently

playing.

4-76 Monitor, climate, audio, phone and voice recognition systems

● Song displays the ID3 encoded tag of the

song name.

● Album displays the ID3 encoded tag of the

album name.

● Artist displays the ID3 encoded tag of the

artist’s name.

Some of this text might not display while playing a regular CD. FM/AM/SAT radio operation FM/AM band select:

Pressing the FM·AM button will change the band as follows: AM → FM1 → FM2 → AM When the FM·AM button is pressed while the ignition switch is in the ACC or ON position, the radio will come on at the station last played.

The last station played will also come on when the VOL/ON·OFF control knob is pressed ON.

If a compact disc is playing when the FM·AM button is pressed, the compact disc will auto- matically be turned off and the last radio station played will come on.

The FM stereo indicator STEREO will illuminate during FM stereo reception. When the stereo

broadcast signal is weak, the radio will automati- cally change from stereo to monaural reception. SAT band select:

Pressing the SAT button will change the band as follows: XM1* → XM2* → XM3* → XM1 (satellite, if so equipped)

When the SAT button is pressed while the igni- tion switch is in the ACC or ON position, the radio will come on at the station last played.

The last station played will also come on when the VOL/ON·OFF control knob is pressed ON.

*When the SAT button is pressed, the satellite radio reception will not be available unless an optional satellite receiver and antenna are in- stalled and an XM姞 satellite radio service sub- scription is active. Satellite radio is not available in Alaska, Hawaii and Guam.

If a compact disc is playing when the SAT button is pressed, the compact disc will automatically be turned off and the last radio station played will come on. TUNE/FOLDER (Tuning) knob:

To manually TUNE/FOLDER knob to the right or left.

radio,

tune

the

turn

the

SEEK/CAT and TRACK tuning buttons:

For AM or FM: the Press the SEEK/CAT button to tune from high to low or TRACK low to high frequencies and stop at the next broadcasting station.

button or

For XM: Press the SEEK/CAT TRACK the previous or next category. SCAN tuning:

the button to go to the first channel of

button or

Press the SCAN button to stop at each broad- casting station for 5 seconds. Pressing the SCAN button again during this five second pe- riod will stop scan tuning and the radio will remain tuned to that station. If the SCAN button is not pressed within 5 seconds, scan tuning moves to the next station. 1 to 6 Station memory operations:

Six stations can be set for the AM band. Twelve stations can be set for the FM band (6 for FM1, 6
for FM2). Eighteen channels can be set for the SAT radio (6 for XM1, 6 for XM2, 6 for XM3 – if so equipped).

Monitor, climate, audio, phone and voice recognition systems 4-77

● Favorite Artist & Songs

– Tags the current artist or song playing on

XM as a favorite.

– Turn the Alert ON to indicate whenever a favorite artist or song is playing on XM. The audio system must be playing XM radio for this feature to work.

– Delete a favorite artist or song.

● Categories – Displays a category list for XM radio. Select a category to select the first channel for that category.

● Direct Tune – Tune to a channel by entering

the channel number.

1. Choose the radio band AM, FM1 or FM2
using the FM·AM select button, or choose the satellite band XM1, XM2 or XM3 using the SAT button.

2. Tune to the desired station using manual, SEEK or SCAN tuning. Press and hold any of the desired station memory buttons (1 – 6) until the preset number is updated on the display and the sound is briefly muted.

3. The channel indicator will then come on and the sound will resume. Programming is now complete.

4. Other buttons can be set in the same man-

ner.

If the battery cable is disconnected, or if the fuse opens, the radio memory will be canceled. In that case, reset the desired stations. List (AM and FM) Select the “List” key using the NISSAN controller or touchscreen to see a list of the presets in the AM, FM1 or FM2 preset banks.

LHA1375

Menu (XM, if so equipped) Select the “Menu” key using the NISSAN control- ler or touchscreen to see a list of options: ● Preset List – Displays the list of presets. Press and hold the touchscreen or ENTER button on the NISSAN controller to save a preset.

● Customize Channel List – deselect chan- nels to skip while using the TUNE/FOLDER knob.

4-78 Monitor, climate, audio, phone and voice recognition systems

Radio data system (RDS): RDS stands for Radio Data System, and is a data information service transmitted by some radio stations on the FM band (not AM band). Cur- rently, most RDS stations are in large cities, but many stations are now considering broadcasting RDS data. RDS can display: ● Station call sign, such as “WHFR 98.3”. ● Station name, such as “The Groove”. ● Music or programming type such as “Clas-

sical”, “Country”, or “Rock”.

● Station specific text. If the station broadcasts RDS information, the text information is automatically displayed.

disc was

Compact disc (CD) player operation Place the ignition in the ACC or ON position and insert the compact disc into the slot with the label side facing up. The compact disc will be guided automatically into the slot and start playing. If the radio is already operating, it will automati- cally turn off and the compact disc will play. If the system has been turned off while the com- pact the VOL/ON·OFF control knob will start the compact disc. DISC·AUX button: When the DISC·AUX button is pressed with the system off and the compact disc loaded, the system will turn on and the compact disc will start to play. When the DISC·AUX button is pressed with the compact disc loaded but the radio playing, the radio will automatically be turned off and the compact disc will start to play.

pressing

playing,

SEEK/CAT and TRACK buttons:

button is pressed When the SEEK/CAT while a compact disc is playing, the track being played returns to its beginning. Press several times to skip back through tracks. The compact disc will go back the number of times the button is pressed.

button is pressed while When the TRACK the compact disc is playing, the next track will start to play from its beginning. Press several times to skip through tracks. The compact disc will advance the number of times the button is pressed. (When the last track on the compact disc is skipped through, the first track will be played.) The NISSAN controller can also be used to se- lect tracks when a CD is being played.

Monitor, climate, audio, phone and voice recognition systems 4-79

SEEK/CAT and TRACK (Rewind and Fast Forward) buttons:

(rewind) Press and hold the SEEK/CAT button or the TRACK (fast forward) button while a compact disc is playing; the compact disc will play while rewinding or fast forwarding. When the button is released, the compact disc will return to normal play speed. TUNE/FOLDER knob While playing a CD with compressed audio files, turn the TUNE/FOLDER knob right or left to play the next or previous folder.

LHA1258

LHA1259

CD menu Touch the “Menu” key on the display while a CD or CD with compressed audio files is playing to bring up a list of options. Depending on the type of CD being played, the following options may be available:

● Play Mode This option allows you to alter the play pattern of the CD. Touch the key of the mode you wish to apply. The modes change the play pattern as follows:

1 Track Repeat - the current track is repeated. 1 Disc Random- tracks from the entire disc are played randomly. 1 Folder Repeat (compressed audio files CD only) - the current folder is repeated. 1 Folder Random (compressed audio files CD only) - tracks from the current folder are played randomly.

4-80 Monitor, climate, audio, phone and voice recognition systems

LHA1262
Normal - Plays all tracks on the CD in sequential order until stopped.

LHA1260

LHA1261

● Folder List The folders on the disc are displayed. Select the key of a folder name to begin playing tracks from that folder.

● Track List The tracks on the disc are displayed. Select the key of a track name to begin playing that track.

Monitor, climate, audio, phone and voice recognition systems 4-81

CD EJECT button:

When the pact disc loaded, ejected.

button is pressed with the com- the compact disc will be

button is pressed while the When the compact disc is being played, the compact disc will eject and the system will turn off.

LHA1267

● Title Text Priority ● Record to Music Box, Automatic Recording,

Recording Quality

For more information about these options, see “Music Box™ Hard-Drive Audio System with Navigation System” in this section.

4-82 Monitor, climate, audio, phone and voice recognition systems

LHA2031

AUX (auxiliary) input jacks

The auxiliary input jacks are located inside the center console 䊊1 . NTSC compatible devices such as video games, camcorders and portable video players can be connected to the auxiliary input jacks. Audio devices, such as some MP3
players, can also be connected to the system through the auxiliary input jacks. The auxiliary input jacks are color coded for iden- tification purposes: ● Red – right channel audio input ● White – left channel audio input ● Yellow – video input

Before connecting a device to the auxiliary input jacks, turn off the power of the portable device. With a compatible device connected to the aux- iliary input jacks, press the DISC·AUX button repeatedly until the AUX mode appears in the display. The output from the device will be played through the display (when the vehicle is in the (P) Park position and the parking brake engaged) and audio system.

LHA1394
For more information about the Music Box姞 fea- ture available with this system, see “Music Box姞 with Navigation System” in this section. the Bluetooth姞 For more information about streaming audio feature available with this sys- tem, see “Bluetooth姞 streaming audio” in this section.

WHA1393

AUX settings

Select the “Settings” key using the NISSAN con- troller. The display mode can be set to Normal, Wide or Cinema. The volume setting can be set to Low, Medium or High. Additional features For more information about the iPod姞 player available with this system, see “iPod姞 player op- eration with Navigation System” in this section. For more information about the USB interface available with this system, see “USB interface (models with Navigation System)” in this section.

Monitor, climate, audio, phone and voice recognition systems 4-83

DIGITAL VERSATILE DISC (DVD) PLAYER OPERATION (models with Navigation System) Precautions Start the engine when using the DVD entertain- ment system.

Movies will not be shown on the front display while the vehicle is in any drive position to reduce driver distraction. Audio is available when a movie is played. To view movies on the front display, stop the vehicle in a safe location, move the shift selector to the P (Park) position and apply the parking brake.

WARNING

● The driver must not attempt to operate the DVD system or wear the head- phones while the vehicle is in motion so that full attention may be given to ve- hicle operation.

● Do not attempt to modify the system to display a movie on the front screen while the vehicle is being driven. Doing so may distract the driver and may cause a collision and serious personal injury or death.

CAUTION

● Only operate the DVD while the vehicle engine is running. Operating the DVD for extended periods of time with the engine OFF can discharge the vehicle battery.

● Do not allow the system to get wet. Excessive moisture such as spilled liq- uids may system to malfunction.

cause

the

● While playing VIDEO-CD media, this DVD player does not guarantee com- plete functionality of all VIDEO-CD formats.

LHA1376

Playing a DVD DISC-AUX button

Park the vehicle in a safe location for the front seat occupants to operate the DVD drive while watching the images.

Press the DISC-AUX button until the DVD mode is active on the display.

When a DVD is loaded, it will be replayed auto- matically.

The operation screen will be turned on when the DISC-AUX button is pressed while a DVD is playing. The operation screen will turn off auto-

4-84 Monitor, climate, audio, phone and voice recognition systems

matically after a period of time. To turn it on again, press the DISC-AUX button. DVD operation keys When the DVD is playing without the operation screen being shown, you may use the touch- screen to select items from the displayed video. You may also use the NISSAN controller to select an item from the displayed video. When the op- eration screen is being shown, use the NISSAN controller or the touchscreen to select an item from the displayed menus.

PAUSE:

Select the sume playing the DVD, use the

key to pause the DVD. To re-

key.

PLAY:

key to start playing the DVD or Select the resume playing the DVD after it has been paused.

STOP:

Select the

key to stop playing the DVD.

NEXT/PREVIOUS CHAPTER:

key to skip the chapter(s) of the Select the key to skip the disc forward. Select the chapter(s) of the disc backward. The chapters will advance forward or backward the number of times the respective key is touched or selected with the NISSAN controller.

CM SKIP:

or

This function is only for DVD-VIDEO and DVD- VR. Select the key to fast forward or rewind a set interval of time based on the CM settings. For more information, see “DVD set- tings” in this section. Top Menu:

When the “Top Menu” key is selected while the DVD is playing, the top menu specific to each disc will be displayed. For details, see the instruc- tions attached to the disc. DVD settings Select the “Settings” key to adjust the following settings: ● Key (DVD-VIDEO)

Displays the operation keys for the specific DVD menu.

– Select the directional keys to move the

cursor on the DVD menu.

– Select the “Enter” key to fix the selected

menu item.

– Select the “Move” key to move the loca- tion of the operation keys on the screen.

– Select the “Back” key to return to the

previous menu screen.

– Select the “Hide” key to hide the opera-

tion keys.

● Title Menu (DVD-VIDEO)

Some menus specific to each disc will be shown. For details, see the instructions at- tached to the disc.

● Title Search (DVD-VIDEO, DVD-VR)

The scene with the specified title will be displayed the number of times the “+” or “-” side is selected.

● Group Search (VIDEO CD)

The scene with the specified group will be displayed the number of times the “+” or “-” side is selected.

Monitor, climate, audio, phone and voice recognition systems 4-85

● Display Mode (DVD-VIDEO, VIDEO CD,

DVD-VR) Choose from the “Full”, “Wide”, “Normal” or “Cinema” mode.

● Title List (DVD-VR)

Choose the preferred title from the list.

● Play Mode

Choose the preferred play mode.

● PG/PL Mode (DVD-VR)

Choose from the “PG” or “PL” mode.

● 10 Key Search (DVD-VIDEO, VIDEO CD,

CD-DA, DVD-VR) Select the “10 Key Search” key to open the number entry screen. Input the number you want to search for and select the “OK” key. The specified Title/Chapter or Group/Track will be played.

● Select No. (VIDEO CD)

Select the “Select No.” key to open the number entry screen. Input the number you want to search for and select the “OK” key. The specified scene will be played.

● Angle (DVD-VIDEO)

If the DVD contains different angles (such as moving images), the current image angle can be switched to another one. Select the “Angle” key and use the “+” or “-” key to change the angle.

● Angle Mark (DVD-VIDEO)

When this item is turned on, an angle mark will be shown on the bottom of the screen if the scene can be seen from a different angle.

● Menu Skip (DVD-VIDEO)

DVD menus are automatically configured and the contents will be played directly when the “Menu Skip” key is turned on. Note that some discs may not be played directly even if this item is turned on.

● CM Skip (DVD-VIDEO)

Select the “CM Skip” key to choose the setting time for CM backward and forward operations. Use the “+” or “-” key to choose a setting time of 15, 30 or 60 seconds.

● DRC (DVD-VIDEO, DVD-VR)

DRC (Dynamic Range Compression) auto- matically adjusts the soundtrack volume level to maintain a more even sound to the speakers.

● DVD Language (DVD-VIDEO, VIDEO CD) Select the “DVD Language” key to open the number entry screen. Input the number cor- responding to the preferred language and select the “OK” key. The DVD top menu language will be changed to the one speci- fied.

● Display

Adjust the image quality of the screen by selecting the preferred adjustment items.

● Audio

Choose the preferred language for the au- dio.

● Subtitle (DVD-VIDEO, DVD-VR)

Choose the preferred language for the sub- titles.

4-86 Monitor, climate, audio, phone and voice recognition systems

Audio file operation AUX button:

Place the ignition switch in the ON or ACC position and press the AUX button to switch to the USB input mode. If another audio source is playing and a USB memory device is inserted, press the AUX button repeatedly until the center display changes to the USB memory mode.

If the system has been turned off while the USB memory was playing, push the ON-OFF/VOL control knob to restart the USB memory.

SEEK/CAT and TRACK (Reverse or Fast Forward) buttons:

Press and hold the SEEK/CAT (rewind) (fast forward) button for button or TRACK 1.5 seconds while an audio file on the USB device is playing to reverse or fast forward the track being played. The track plays at an in- creased speed while reversing or fast forwarding. When the button is released, the audio file re- turns to normal play speed.

SEEK/CAT and TRACK buttons:

while an au- Press the SEEK/CAT button dio file on the USB device is playing to return to the beginning of the current track. Press the several times to skip SEEK/CAT button backward several tracks.

while an audio Press the TRACK button file on the USB device is playing to advance one several track. Press the TRACK button times to skip forward several tracks. If the last track in a folder on the USB device is skipped, the first track of the next folder is played. Folder selection: To change to another folder in the USB memory, turn the TUNE/FOLDER knob or choose a folder displayed on the screen using the NISSAN con- troller. RPT/RDM button: When the RPT/RDM button is pressed while the USB memory is playing, the play pattern can be changed as follows: Repeat All → 1 Folder Repeat → 1 Track Repeat → All Random → 1 Folder Random → Repeat All

Monitor, climate, audio, phone and voice recognition systems 4-87

LHA2030

USB INTERFACE (models without Navigation System) (if so equipped) Connecting a device to the USB input jack The USB input jack is located in the center con- sole. Insert the USB device into the jack 䊊1 . When a compatible storage device is plugged into the jack, compatible audio files on the stor- age device can be played through the vehicle’s audio system.

When there are both audio and movie files in the USB memory, the mode select screen is dis- played. Use the touchscreen or the NISSAN con- troller to select the preferred type of file. When there is only type of file in the USB memory, that audio or movie operation screen is displayed and starts to play. When you play a file with limited playing time, the confirmation screen will be displayed before starting to play the file. Confirm the playing time and select “yes” to start playing. Audio file operation DISC-AUX button: Place the ignition switch in the ON or ACC position and press the DISC-AUX button to switch to the USB input mode. If another audio source is playing and a USB memory device is inserted, press the DISC-AUX button repeatedly until the center display changes to the USB memory mode. If the system has been turned off while the USB memory was playing, push the ON-OFF/VOL control knob to restart the USB memory.

LHA2030

LHA1378

USB INTERFACE (models with Navigation System) Connecting a device to the USB input jack The USB input jack is located in the center con- sole. Insert the USB device into the jack 䊊1 . When a compatible storage device is plugged into the jack, compatible audio and video files on the storage device can be played through the vehicle’s audio system and center display screen.

4-88 Monitor, climate, audio, phone and voice recognition systems

SEEK/CAT and TRACK (Reverse or Fast Forward) buttons:

Press and hold the SEEK/CAT (rewind) (fast forward) button for button or TRACK 1.5 seconds while an audio file on the USB device is playing to reverse or fast forward the track being played. The track plays at an in- creased speed while reversing or fast forwarding. When the button is released, the audio file re- turns to normal play speed.

SEEK/CAT and TRACK buttons:

Press the SEEK/CAT button while an au- dio file on the USB device is playing to return to the beginning of the current track. Press the several times to skip SEEK/CAT button backward several tracks.

while an audio Press the TRACK button file on the USB device is playing to advance one several track. Press the TRACK button times to skip forward several tracks. If the last track in a folder on the USB device is skipped, the first track of the next folder is played.

Folder selection: To change to another folder in the USB memory, turn the TUNE/FOLDER knob or choose a folder displayed on the screen using the NISSAN con- troller. RPT/RDM button: When the RPT/RDM button is pressed while the USB memory is playing, the play pattern can be changed as follows: Normal → 1 Folder Repeat → 1 Track Repeat → All Random → 1 Folder Random → Normal

LHA1294

Menu:

There are some options available during play- back. Select one of the following that are dis- played on the screen, if necessary. Refer to the following information for each item. ● Movie Playback

Switch to the movie playback mode. This item is displayed only when the USB memory contains movie files. The shift selector must be in Park (P) with the parking brake engaged to watch movies from a USB device.

Monitor, climate, audio, phone and voice recognition systems 4-89

● Folder List/Track List

Displays the folder or track list. The “Movie Playback” key is also displayed in this list screen and enables you to switch to the movie playback mode.

● Play Mode

Choose the preferred play mode using the NISSAN controller or the touchscreen.

Operation keys:

To operate the USB memory, select the desired key displayed on the display screen.

●

●

●

●

Pause:

key to pause the movie file. Select the To resume playing the movie file, use the

key.

Play:

key to start playing the Select the movie file or resume the movie file if it has been paused.

Stop:

Select the movie file.

key to stop playing the

Next Chapter/Fast Forward:

key to skip the chapter(s) Select the of the disc forward. The chapters will ad- vance the number of times the key is se- lected. Press and hold the key to fast for- ward the chapter.

LHA1379

Movie file operation Park the vehicle in a safe location for the front seat occupants to operate the USB memory while watching the images.

DISC-AUX button:

When the DISC-AUX button is pushed with the system off and the USB memory inserted, the system will turn on. If another audio source is playing and the USB memory is inserted, press the DISC-AUX button repeatedly until the center display changes to the USB memory mode.

4-90 Monitor, climate, audio, phone and voice recognition systems

●

Previous Chapter/Rewind:

key to skip the chapter(s) Select the of the disc backward. The chapters will go back the number of times the key is selected. Press and hold the key to rewind the chap- ter.

List: Select the “List” key on the movie file operation screen to display the file list.

Settings:

● 10 Key Search

Select the “10 Key Search” key to open the number entry screen. Input the number you want to search for and the specified file or folder will be played.

● Display

Adjust the image quality of the screen.

● DRC

DRC (Dynamic Range Compression) auto- matically adjusts the soundtrack volume level to maintain a more even sound to the speakers.

LHA1380

● Audio

Choose the preferred language of the audio.

● Subtitle

Choose the preferred language of the sub- titles.

● Display Mode

Choose between the “Normal”, “Wide”, “Cinema” or “Full” display modes.

Select the “Settings” key to adjust the following settings: ● Audio File Playback

Switch to the audio playback mode. This item is displayed only when the USB memory contains audio files.

● Play Mode

Choose between the “Normal” or “1 Track Repeat” play modes.

Monitor, climate, audio, phone and voice recognition systems 4-91

While connected to the vehicle, the iPod姞 can only be operated by the vehicle audio controls. To disconnect the iPod姞 from the vehicle, remove the USB end of the cable from the USB jack on the vehicle, then remove the cable from the iPod姞. * iPod姞 is a trademark of Apple Inc., registered in the U.S. and other countries. Compatibility The following models are compatible: ● iPod姞 5th Generation - version 1.2.1
● iPod姞 Classic - version 1.1
● iPod姞 Touch - version 2.1.0
● iPod姞 Nano - 1st generation version 1.3.1
● iPod姞 Nano - 2nd generation version 1.1.3
● iPod姞 Nano - 3rd generation version 1.0.2
Make sure that your iPod姞 firmware is updated to the version indicated above.

LHA2030

iPod姞* PLAYER OPERATION WITHOUT NAVIGATION SYSTEM (if so equipped) Connecting iPod姞 To connect an iPod姞 to the vehicle so that the iPod姞 can be controlled with the audio system controls and display screen, use the USB jack located in the center console. Connect the iPod姞-specific end of the cable to the iPod姞 and the USB end of the cable to the USB jack on the vehicle 䊊1 . If your iPod姞 supports charging via a USB connection, its battery will be charged while connected to the vehicle with the ignition switch in the ACC or ON position. 4-92 Monitor, climate, audio, phone and voice recognition systems

LHA1395

Audio main operation Place the ignition switch in the ACC or ON position. Press the AUX button repeatedly to switch to the iPod姞 mode. If the system has been turned off while the iPod姞 was playing, pressing the VOL/ON·OFF control knob will start the iPod姞. AUX button: When the AUX button is pressed with the system off and the iPod姞 connected, the system will turn on. If another audio source is playing and the iPod姞 is connected, press the AUX button re- peatedly until the center display changes to the iPod姞 mode.

● Albums ● Artists ● Genres ● Composers ● Audiobooks The following keys shown on the screen are also available: ● MENU: returns to the previous screen.

●

: plays/pauses the music selected.

SEEK/CAT and TRACK buttons:

SEEK/CAT button or

When the TRACK button is pressed for less than 1.5 sec- onds while the iPod姞 is playing, the next track or the beginning of the current track on the iPod姞 will be played.

SEEK/CAT button or

When the TRACK button is pressed for more than 1.5 sec- onds while the iPod姞 is playing, the iPod姞 will play while fast forwarding or rewinding. When the button is released, the iPod姞 will return to the normal play speed.

LHA1396

Interface: The interface for iPod姞 operation shown on the vehicle center display is similar to the iPod姞 in- terface. Use the NISSAN controller and the BACK button to play the iPod姞 with your favorite settings.

The following items can be chosen from the menu list screen. For further information about each item, see the iPod姞 Owner’s Manual. ● Playlists ● Podcasts ● Songs

LHA2030

iPod姞* PLAYER OPERATION WITH NAVIGATION SYSTEM (if so equipped) Connecting iPod姞 To connect an iPod姞 to the vehicle so that the iPod姞 can be controlled with the audio system controls and display screen, use the USB jack located in the center console. Connect the iPod姞-specific end of the cable to the iPod姞 and the USB end of the cable to the USB jack on the vehicle 䊊1 . If your iPod姞 supports charging via a USB connection, its battery will be charged while connected to the vehicle with the ignition switch in the ACC or ON position.

Monitor, climate, audio, phone and voice recognition systems 4-93

DISC·AUX button: When the DISC·AUX button is pressed with the system off and the iPod姞 connected, the system will turn on. If another audio source is playing and the iPod姞 is connected, press the DISC·AUX button repeatedly until the center display changes to the iPod姞 mode.

While connected to the vehicle, the iPod姞 can only be operated by the vehicle audio controls. To disconnect the iPod姞 from the vehicle, remove the USB end of the cable from the USB jack on the vehicle, then remove the cable from the iPod姞. * iPod姞 is a trademark of Apple Inc., registered in the U.S. and other countries. Compatibility The following models are compatible: ● iPod姞 5th Generation version 1.2.3
● iPod姞 Classic - version 1.1.1
● iPod姞 Touch - version 2.0.0* ● iPod姞 Nano - 1st generation version 1.3.1
● iPod姞 Nano - 2nd generation version 1.1.3
● iPod姞 Nano - 3rd generation version 1.1.3
● iPod姞 Nano - 4th generation version 1.0.4
● iPod姞 Nano - 5th generation version 1.0.1
* Some features of this iPod姞 may not be fully functional. Make sure that your iPod姞 firmware is updated to the version indicated above.

LHA1397

Audio main operation Place the ignition switch in the ACC or ON position. Press the DISC·AUX button repeatedly to switch to the iPod姞 mode. If the system has been turned off while the iPod姞 was playing, pressing the VOL/ON·OFF control knob will start the iPod姞.

4-94 Monitor, climate, audio, phone and voice recognition systems

● Albums ● Songs ● Podcasts ● Genres ● Composers ● Audiobooks ● Shuffle Songs The following keys shown on the screen are also available: ● MENU: returns to the previous screen.

●

: plays/pauses the music selected.

LHA1315

Play mode: While the iPod姞 is playing, touch the “Menu” key to display the iPod姞 menu. Touch the “Play Mode” key to display the Play Mode screen and adjust the settings for Shuffle, Repeat and Audio- books. For further information about each item, see the iPod姞 Owner’s Manual. SEEK/CAT and TRACK buttons:

SEEK/CAT button or

When the TRACK button is pressed for less than 1.5 sec- onds while the iPod姞 is playing, the next track or the beginning of the current track on the iPod姞 will be played.

Monitor, climate, audio, phone and voice recognition systems 4-95

LHA1398

Interface: The interface for iPod姞 operation shown on the vehicle center display is similar to the iPod姞 in- terface. Use the NISSAN controller and the BACK button to play the iPod姞 with your favorite settings. The touchscreen can also be used to control your favorite settings. The following items can be chosen from the menu list screen. For further information about each item, see the iPod姞 Owner’s Manual. ● Now Playing ● Playlists ● Artists

SEEK/CAT button or

When the TRACK button is pressed for more than 1.5 sec- onds while the iPod姞 is playing, the iPod姞 will play while fast forwarding or rewinding. When the button is released, the iPod姞 will return to the normal play speed. The NISSAN controller can also be used to se- lect tracks when the iPod姞 is playing.

To exit the scrolling by letter mode, perform one of the following: ● Press the ENTER button on the NISSAN

controller.

● Push the ENTER switch on the steering

wheel.

● Do not touch the controls for 2 seconds. MUSIC BOX姞 WITHOUT NAVIGATION SYSTEM (if so equipped) The Music Box system can store songs from CDs being played. The system has an 800 megabyte (MB) storage capacity. The following CDs can be recorded in the Music Box system: ● CDs without MP3/WMA files. ● Hybrid Compact Disc Digital Audio (Hybrid CD-DA) specification in Super Audio CDs. ● Compact Disc Digital Audio (CD-DA) speci-

fication in CD-Extras.

● First session of multisession disc.

LHA1399

Scrolling menus: While navigating long lists of artists, albums or songs in the music menu, it is possible to scroll the list by the first letter. To activate letter index- ing, perform one of the following: ● Turn the NISSAN controller quickly. ● Press and hold the up/down directional ar-

rows on the NISSAN controller.

● Touch and hold the page up/down arrows

on the touchscreen.

4-96 Monitor, climate, audio, phone and voice recognition systems

Extreme temperature conditions [below ⫺4°F (⫺20°C) and above 158°F (70°C)] could affect the performance of the hard drive.

NOTE: If the hard drive needs to be replaced due to a malfunction, all stored music data will be erased.

WHA1368

Recording CDs 1. Operate the audio system to play a CD.

For information on playing CDs, see “Com- pact Disc (CD) player operation” in this sec- tion.

2. Select the “REC” key with the NISSAN con- troller. “REC Track” appears on the screen.

NOTE: ● The system starts playing and recording the 1st track on the CD when the “REC” key is selected.

WHA0956
● The recording process can be stopped at any time. All tracks that were played before the CD was stopped are stored.

● Individual tracks can be deleted from the

Music Box after the CD is recorded.

If the title information of the track being recorded is stored either in the hard drive or in the CD, the title is automatically displayed on the screen. For title acquisition from the hard-disk drive, music recognition technology and related data are pro- vided by Gracenote姞. If a track is not recorded successfully due to symbol is displayed skipping sounds, the behind the track number.

Monitor, climate, audio, phone and voice recognition systems 4-97

The Music Box audio system cannot perform recording under the following conditions: ● There is not enough space in the Music Box. ● The number of albums reaches the maximum

of 99.

● The number of tracks reaches the maximum

of 2,000.

Automatic recording: If the “Automatic Recording” function is turned to ON, recording starts when a CD is inserted and any previous CD “converting” is finished. For more information, see “Music Box settings” in this section. Stopping recording: To stop the recording, select the “Stop REC” key on the screen. If the CD is ejected, the audio system is turned off or the ignition switch is placed in the OFF position, the recording also stops.

Stopping playback:

The system stops playing when: ● Another mode (radio, CD, USB memory,

iPod姞 or AUX) is selected.

● The audio system is turned off. ● The ignition switch is placed in the OFF

position.

SEEK/CAT and TRACK buttons:

SEEK/CAT button while a track Press the is playing to return to the beginning of the current TRACK button while a track. Press the track is playing to skip to the beginning of the next track.

SEEK/CAT (re- If you press and hold the TRACK (fast forward) wind) button or the button for more than approximately 1.5 seconds; the track will play while rewinding or fast forward- SEEK/CAT (rewind) button ing. When the TRACK (fast forward) button is re- or the leased, the track will return to the normal playing speed.

The NISSAN controller can also be used to se- lect tracks.

WHA1369

Playing recorded songs Select the Music Box audio system by using one of the following methods: ● Press the SOURCE select switch on the

steering wheel. For information, see “Steering wheel switch for audio control” in this section.

● Press the DISC button repeatedly until the center display changes to the Music Box mode.

4-98 Monitor, climate, audio, phone and voice recognition systems

For more information on how to use the NISSAN controller, see “How to use the NISSAN control- ler” in this section. Play mode selection: To change to another album or artist, turn the TUNE/FOLDER knob. RPT/RDM button: Press the RPT/RDM button while a track is play- ing to change the play pattern as follows: Repeat All → 1 Folder Repeat → 1 Track Repeat → All Random→ 1 Folder Random → Repeat All

WHA1370

WHA1371

Music Box menu

There are some options available during play- back. Select the “Menu” key, then select one of the following that are displayed on the screen, if necessary. Refer to the following information for each item: ● Music Library

There are some options available during playback. Select one of the following op- tions that are displayed on the screen, if necessary.

● Albums

Play tracks in each album. The albums are stored in alphabetical order.

● Artists

Play tracks by an artist whose music is cur- rently being played. The artists are stored in alphabetical order.

● Genres

Play tracks by genre by selecting from the displayed list.

● All Songs

Play tracks from all recorded tracks. The tracks are stored in alphabetical order.

Monitor, climate, audio, phone and voice recognition systems 4-99

● Automatic Recording:

When this item is turned to ON, the Music Box system automatically starts recording when a CD is inserted.

● Recording Quality:

Set the recording quality of 105 kbps or 132
kbps. The default is set to 105 kbps.

● Gracenote Database Version:

The version of the built-in Gracenote姞 Data- base is displayed.

Gracenote姞

NOTE: ● The

information

the Gracenote姞 Database is not fully guaran- teed.

contained

in

● The service of the Gracenote姞 Database on the Internet may be stopped without prior notice for maintenance.

WHA1372

WHA1373

● Transfer Titles from USB

Update the in-vehicle Gracenote姞 Database using a USB memory device. Search the title from information acquired on the Internet. Visit www.nissanusa.com/gracenote/ for details.

● Transfer Missing Titles to USB

Transfer the information of an album re- corded without titles to the USB memory. Visit www.nissanusa.com/gracenote/ for details.

● Update Missing Titles

Search the title using the database in the hard-disk.

Music Box settings To set up the Music Box system to your preferred settings, select the “Menu” key with the NISSAN controller during playback. Then select the “Mu- sic Box Settings” key with the NISSAN controller. ● Music Box Used/Free Space:

Information about “Saved Album”, “Saved Track” and “Remaining Time” is displayed.

● Delete Songs from the Music Box:

Delete the current song, selected songs or albums by choosing from the list, or all songs/albums in the Music Box.

4-100 Monitor, climate, audio, phone and voice recognition systems

End-User License Agreement

USE OF THIS PRODUCT IMPLIES ACCEP- TANCE OF THE TERMS BELOW. Gracenote姞 MusicID™ Terms of Use This device contains software from Gracenote, Inc. of Emeryville, California (“Gracenote”). The software from Gracenote (the “Gracenote Soft- ware”) enables this application to do online disc identification and obtain music-related informa- tion, including name, artist, track, and title infor- mation (“Gracenote Data”) from online servers (“Gracenote Servers”) and to perform other func- tions. You may use Gracenote Data only by means of the intended End-User functions of this device. You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote Servers for your own personal non-commercial use only. You agree not to assign, copy, transfer or transmit the Gracenote Software or any Gracenote Data to any third party. YOU AGREE NOT TO USE OR EXPLOIT THE GRACENOTE SOFTWARE, OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY PERMIT- TED HEREIN. You agree that your non-exclusive license to use the Gracenote Data, the Gracenote Software,

GRACENOTE

DATA,

and Gracenote Servers will terminate if you vio- late these restrictions. If your license terminates, you agree to cease any and all use of the Gracenote Data, the Gracenote Software, and Gracenote Servers. Gracenote reserves all rights in Gracenote Data, the Gracenote Software, and the Gracenote Servers, including all ownership rights. Under no circumstances will Gracenote become liable for any payment to you for any information that you provide. You agree that Gracenote, Inc. may enforce its rights under this Agreement against you directly in its own name. The Gracenote MusicID Service uses a unique identifier to track queries for statistical purposes. The purpose of a randomly assigned numeric identifier is to allow the Gracenote MusicID ser- vice to count queries without knowing anything about who you are. For more information, see the web page for the Gracenote Privacy Policy for the Gracenote MusicID Service. The Gracenote Software and each item of Gracenote Data are licensed to you “AS IS.” Gracenote makes no representations or warran- ties, express or implied, regarding the accuracy of any Gracenote Data from in the Gracenote Servers. Gracenote reserves the right to delete data from the Gracenote Servers or to change data categories for any cause that Gracenote deems sufficient. No warranty is made that the Gracenote Software or Gracenote Servers are

error-free or that functioning of Gracenote Soft- ware or Gracenote Servers will be uninterrupted. Gracenote is not obligated to provide you with new enhanced or additional data types or cat- egories that Gracenote may provide in the future and is free to discontinue its online services at any time. GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MER- CHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NONINFRINGEMENT. GRACENOTE DOES NOT WARRANT THE RE- SULTS THAT WILL BE OBTAINED BY YOUR USE OF THE GRACENOTE SOFTWARE OR ANY GRACENOTE SERVER. IN NO CASE WILL GRACENOTE BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAM- AGES OR FOR ANY LOST PROFITS OR LOST REVENUES. Copyright: Music recognition technology and related data are provided by Gracenote姞. Gracenote is the industry standard in music recognition technol- ogy and related content delivery. For more infor- mation visit www.gracenote.com. CD and music-related data from Gracenote, Inc., copyright © 2000-2007 Gracenote. Gracenote Software, copyright © 2000-2007 Gracenote. Monitor, climate, audio, phone and voice recognition systems 4-101

Extreme temperature conditions [below ⫺4°F (⫺20°C) and above 158°F (70°C)] could affect the performance of the hard drive.

NOTE: If the hard drive needs to be replaced due to a malfunction, all stored music data will be erased.

#6,154,773, #6,230,207,

This product and service may practice one or more of the following U.S. Patents: #5,987,525; #6,061,680; #6,161,132, #6,230,192, #6,240,459, #6,330,593, and other patents issued or pend- ing. Some services supplied under license from Open Globe, Inc. for U.S. Patent: #6,304,523. Gracenote and CDDB are registered trademarks of Gracenote. The Gracenote logo and logotype, and the “Powered by Gracenote” logo are trade- marks of Gracenote. MUSIC BOX姞 WITH NAVIGATION SYSTEM (if so equipped) The Music Box system can store songs from CDs being played. The system has a 9.3 gigabyte (GB) storage capacity.

The following CDs can be recorded in the Music Box system: ● CDs without compressed audio files. ● Hybrid Compact Disc Digital Audio (Hybrid CD-DA) specification in Super Audio CDs. ● Compact Disc Digital Audio (CD-DA) speci-

fication in CD-Extras.

● First session of multisession disc.

4-102 Monitor, climate, audio, phone and voice recognition systems

LHA1263

Recording CDs 1. Operate the audio system to play a CD.

For information on playing CDs, see “Com- pact Disc (CD) player operation” in this sec- tion.

2. Touch the “Start REC” key. REC CD ap-

pears on the screen.

NOTE: ● The system starts playing and recording the 1st track on the CD when the “Start REC” key is selected.

Stopping recording: To stop the recording, touch the “Stop REC” key on the screen. If the CD is ejected, the audio system is turned off or the ignition switch is placed in the OFF position, the recording also stops.

If the title information of the track being recorded is stored either in the hard drive or in the CD, the title is automatically displayed on the screen. For title acquisition from the hard drive, music recog- nition technology and related data are provided by Gracenote姞. To view the details of the track, touch the “Text” key on the screen or use the NISSAN controller. The track name and album title are displayed on the screen.

If a track is not recorded successfully due to symbol is displayed skipping sounds, the behind the track number.

The Music Box audio system cannot perform recording under the following conditions: ● There is not enough space in the hard drive. ● The number of albums reaches the maximum

of 500.

● The number of tracks reaches the maximum

of 3,000.

Automatic recording:

If the “Automatic Recording” function is turned to ON, recording starts when a CD is inserted. For more information, see “Music Box settings” in this section.

LHA1282
● Individual tracks from a CD cannot be se- lected to be recorded to the Music Box hard drive.

● The fast forward and rewind features are

disabled while the CD is recording.

● The recording process can be stopped at any time. All tracks that were played before the CD was stopped are stored.

● Individual tracks can be deleted from the

hard drive after the CD is recorded.

● The system records faster than it plays.

Monitor, climate, audio, phone and voice recognition systems 4-103

For more information on how to use the NISSAN controller, see “How to use the NISSAN control- ler” in this section. TUNE/FOLDER knob: The TUNE/FOLDER knob skips from album to album unless it is playing “All Songs” from the Music Library menu. When playing “All Songs”, the TUNE/FOLDER knob changes the track in- stead of the album. The upper right corner of the screen indicates if the TUNE/FOLDER knob is changing by track or album.

Stopping playback:

The system stops playing when: ● Another mode (radio, CD, USB, Bluetooth姞

Audio or AUX) is selected.

● The audio system is turned off. ● The ignition switch is placed in the OFF

position.

SEEK/CAT and TRACK buttons:

SEEK/CAT button while a track Press the is playing to return to the beginning of the current TRACK button while a track. Press the track is playing to skip to the beginning of the next track.

SEEK/CAT (re- If you press and hold the TRACK (fast forward) wind) button or the button for more than approximately 1.5 seconds; the track will play while rewinding or fast forward- SEEK/CAT (rewind) button ing. When the TRACK (fast forward) button is re- or the leased, the track will return to the normal playing speed.

The NISSAN controller can also be used to se- lect tracks.

LHA1283

Playing recorded songs Select the Music Box audio system by using one of the following methods: ● Press the SOURCE select switch on the

steering wheel. For information, see “Steering wheel switch for audio control” in this section.

● Press the DISC·AUX button repeatedly until the center display changes to the Music Box mode.

● Give voice commands.

For information, see “NISSAN Voice Recog- nition system” in this section.

4-104 Monitor, climate, audio, phone and voice recognition systems

LHA1284

LHA1285

LHA1286

Music Box menu There are some options available during play- back. Select the “Menu” key, then select one of the following that are displayed on the screen, if necessary. Refer to the following information for each item: ● Now Playing

Lists the tracks stored in the Music Box system. Touch the name of the track to begin playing that track.

● Music Library

Lists the songs in the Music Library. Tracks can be searched by Album, Artist or Genre.

Monitor, climate, audio, phone and voice recognition systems 4-105

– Edit Name - changes the name of the

playlist.

– Delete Songs - deletes songs from the

playlist.

● My Playlists

LHA1287

Displays the playlists stored in the system. Touch the “Edit” key next to a playlist to perform the following operations for that playlist:

– Add Current Song - adds the song cur-

rently playing to the playlist.

– Add Songs by Album - adds songs to the

playlist by album.

– Add Songs by Artist - adds songs to the

playlist by artist.

– Edit Song Order - edits the order of the

songs in the playlist.

4-106 Monitor, climate, audio, phone and voice recognition systems

LHA1288

● Play Mode

Alters the play mode of the playlist. Touch the key of the mode you wish to apply. The modes change the play pattern as follows: – Normal - no play pattern is applied. – 1 Album Repeat - the songs in the current

album are repeated.

– 1 Track Repeat - the current track is re-

peated.

– 1 Album Random - the songs in the cur-

rent album are played randomly.

– All Random - all songs are played ran-

domly.

The “Transfer Missing Titles to USB” and “Up- date Gracenote from HDD” options can be used to update the titles of songs in the Music Library. Visit www.nissanusa.com/gracenote for detailed instructions on how to update the Gracenote database.

LHA1289

● Edit Music Information

Edits the information of the songs in the Music Library. – Edit Information of Current Song – Edit Information by Album – Update Gracenote from USB Device