2004 Nissan Frontier Owners Manual

With the spare tire installed the transfer control lever must be in the 2H position to prevent the transfer case and differential gears from being damaged.

Maintenance and do-it-yourself 8-45

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 05/25/04—arosenma X

MEMO

8-46 Maintenance and do-it-yourself

9 Technical and consumer information

Capacities and recommended fuel/lubricants . . . . . . . . . 9-2
Fuel recommendation . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3
Engine oil and oil filter recommendation . . . . . . . . . . . 9-5
Recommended SAE viscosity number . . . . . . . . . . . . 9-6
Air conditioner system refrigerant and lubricant recommendations . . . . . . . . . . . . . . . . . . . . . . 9-6
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-7
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-7
Wheels and tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-8
Dimensions and weights . . . . . . . . . . . . . . . . . . . . . . . . 9-9

When traveling or registering your vehicle in another country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
Vehicle identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
Vehicle identification number (VIN) plate . . . . . . . . . 9-10
Vehicle identification number (chassis number) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
Engine serial number. . . . . . . . . . . . . . . . . . . . . . . . . . . 9-11
F.M.V.S.S. certification label . . . . . . . . . . . . . . . . . . . . 9-11
Emission control information label . . . . . . . . . . . . . . . 9-12
Tire placard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-12
Air conditioner specification label. . . . . . . . . . . . . . . . 9-12
Installing front license plate . . . . . . . . . . . . . . . . . . . . . . . . 9-13
Vehicle loading information . . . . . . . . . . . . . . . . . . . . . . . . 9-13
Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-13

Determining vehicle load capacity . . . . . . . . . . . . . . . 9-14
Securing the load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-14
Loading tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-14
Truck-camper loading information . . . . . . . . . . . . . . . . . . 9-15
Crew Cab Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-15
King Cab models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-15
Special Body vehicles. . . . . . . . . . . . . . . . . . . . . . . . . . 9-15
Location for center of gravity . . . . . . . . . . . . . . . . . . . . 9-15
Vehicle load weight capacity . . . . . . . . . . . . . . . . . . . . 9-16
Measurement of weights . . . . . . . . . . . . . . . . . . . . . . . 9-18
Towing a trailer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-18
Maximum load limits . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-18
Towing load/specification chart . . . . . . . . . . . . . . . . . 9-20
Towing safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-21
Flat towing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-23
Uniform tire quality grading . . . . . . . . . . . . . . . . . . . . . . . . 9-24
Emission control system warranty . . . . . . . . . . . . . . . . . . 9-25
Reporting safety defects (US only) . . . . . . . . . . . . . . . . . 9-25
Readiness for inspection/maintenance (I/M) test . . . . . 9-25

Dynamometer testing for Inspection/ Maintenance (I/M) test (US only) . . . . . . . . . . . . . . . . 9-26
Event data recorders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-26
Owner(cid:146)s Manual/Service Manual order information . . . 9-27
In the event of a collision . . . . . . . . . . . . . . . . . . . . . . . 9-28

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

CAPACITIES AND RECOMMENDED FUEL/LUBRICANTS

The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure described in the (cid:147)Maintenance and do-it-yourself(cid:148) section to determine the proper refill capacity.

Fuel

KA24DE (4 cylinder) VG33E (6 cylinder) VG33ER (6 cylinder with supercharger)

Engine oil

Drain and Refill

KA24DE

With oil filter Without oil filter

VG33E/VG33ER With oil filter

Without oil filter

Cooling system (with heater and reservoir tank)

KA24DE VG33E/VG33ER A/T & M/T

M/T

Manual transmission gear oil KA24DE 4X2
VG33E/VG33ER 4X2
4X4

Final drive gear oil

KA24DE 4X2
VG33E/VG33ER 4X4

Transfer fluid

Automatic transmission fluid

Capacity (Approximate)

US measure

Imp measure

15(cid:150)7/8 gal 19(cid:150)3/8 gal 19(cid:150)3/8 gal

13(cid:150)1/4 gal 16(cid:150)1/8 gal 16(cid:150)1/8 gal

3(cid:150)3/4 qt 3(cid:150)1/2 qt 3(cid:150)1/2 qt 3(cid:150)1/8 qt

7(cid:150)3/4 qt 11(cid:150)5/8 qt

4(cid:150)1/4 pt 5(cid:150)7/8 pt 10(cid:150)3/4 pt

2(cid:150)3/4 pt 3(cid:150)3/4 pt 5(cid:150)7/8 pt 2(cid:150)3/8 qt

3(cid:150)1/8 qt 2(cid:150)7/8 qt 2(cid:150)7/8 qt 2(cid:150)5/8 qt

6(cid:150)3/8 qt 9(cid:150)5/8 qt

3(cid:150)1/2 pt 4(cid:150)7/8 pt

9 pt

2(cid:150)1/4 pt 3(cid:150)1/8 pt 4(cid:150)7/8 pt

2 qt

Liter

60.2
73.5
73.5

3.5
3.3
3.3
3.0

7.3
10.95

2.0
2.8
5.1

1.3
1.75
2.8
2.2

4X2

M/T Front Rear

Recommended Fluids and Lubricants

Unleaded gasoline with an octane rating of at least 87 AKI (RON 91)*1

Unleaded gasoline with an octane rating of at least 91 AKI (RON 96)*1

(cid:149) API Certification Mark *2
(cid:149) API grade SG/SH, Energy conserving I & II or API grade SJ or SL, Energy Conserving *2
(cid:149) ILSAC grade GF-I, GF-II & GF-III

50% Genuine NISSAN Long Life Anti-freeze Coolant or equivalent 50% Demineralized or distilled water

Genuine NISSAN Manual Transmission Fluid HQ Multi 75W-85 or equivalent

API GL-5, Viscosity SAE 80W-90*1 or 80W-90 LS*1for Limited Slip Differential (LSD) applications*2

Refill to the proper level according to the instruc- tions in the (cid:147)Maintenance and do-it-yourself(cid:148) section.

Power steering fluid (PSF) Brake and clutch fluid Multi-purpose grease Air conditioning system refrigerant Air conditioning system lubricant Windshield washer fluid *1: For hot climates, viscosity SAE 90 is suitable for ambient temperatures above 0(cid:176) C (32(cid:176) F). *2: Contact your NISSAN dealer for a list of approved oils. *3: DEXRON(cid:153) III/MERCON(cid:153) or equivalent may also be used. Outside the Continental United States and Alaska contact an authorized NISSAN dealership for more information regarding suitable fluids, including recommended brand(s) of DEXRON(cid:153) III/MERCON(cid:153) Automatic Transmission Fluid. *4: Available in mainland USA through your authorized NISSAN dealer. *5: For further details, see (cid:147)Air conditioner specification label.(cid:148) *6: For Canada, NISSAN Automatic Transmission Fluid (ATF), DEXRON(cid:153) III/MERCON(cid:153), or equivalent ATF may also be used.

API GL-4, Viscosity SAE 75W-85 or 75W-90 or Genuine Nissan Matic D ATF (Continental U.S. and Alaska) or Canada NISSAN Automatic Transmission Fluid.*3
Genuine Nissan Matic D ATF (Continental U.S. and Alaska) or Canada NISSAN Automatic Transmis- sion Fluid.*3
Genuine NISSAN PSF or equivalent.*6
Genuine NISSAN Super Heavy Duty Brake Fluid*4 or equivalent Dot 3 (US FMVSS No. 116) NLGI No. 2 (Lithium Complex) HFC-134a (R-134a)*5
NISSAN A/C System Oil Type R or equivalent*5
Genuine NISSAN Windshield Washer Concentrate Cleaner & Anti-freeze or equivalent

1.32 (cid:150) 1.54 (0.60 (cid:150) 0.70)

200 ml

lb (kg)

7.0 oz

6.8 oz

(cid:151)

(cid:151)

(cid:151)

(cid:151)

(cid:151)

(cid:151)

9-2 Technical and consumer information

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

FUEL RECOMMENDATION For 2.4L/3.3L engine

Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91).

For 3.3L supercharger

Use unleaded premium gasoline with an octane rating of at least 91 AKI number (Research oc- tane number 96).

If unleaded premium gasoline is not available, unleaded regular gasoline with an octane rating of at least 87 AKI (Research octane number 91) can be used, but only under the following precau- tions: c have the fuel tank filled only partially with unleaded regular gasoline, and fill up with unleaded premium as soon as possible.

c avoid full throttle driving and abrupt accel-

eration However, for maximum vehicle perfor- mance, the use of unleaded premium gaso- line is recommended.

CAUTION

Using a fuel other than that specified could adversely affect the emission con- trol system, and may also affect the war- ranty coverage. Under no circumstances should a leaded gasoline be used, because this will dam- age the three-way catalyst.

Gasoline specifications NISSAN recommends using gasoline that meets the World-Wide Fuel Charter specifications where it is available. Many of the automobile manufacturers developed this specification to improve emission system and vehicle perfor- mance. Ask your service station manager if the gasoline meets the World-wide Fuel Charter specifications. Reformulated gasoline Some fuel suppliers are now producing reformu- lated gasolines. These gasolines are specially designed to reduce vehicle emissions. NISSAN supports efforts towards cleaner air and sug- gests that you use reformulated gasoline when available.

Gasoline containing oxygenates Some fuel suppliers sell gasoline containing oxy- genates such as ethanol, MTBE and methanol with or without advertising their presence. NISSAN does not recommend the use of fuels of which the oxygenate content and the fuel com- patibility for your NISSAN cannot be readily de- termined. If in doubt, ask your service station manager.

If you use oxygenate-blend gasoline, please take the following precautions as the usage of such fuels may cause vehicle performance problems and/or fuel system damage. c The fuel should be unleaded and have an octane rating no lower than that recommended for unleaded gasoline. than methanol blend is used, it should con- tain no more than 10% oxygenate. (MTBE may, however, be added up to 15%.)

c If an oxygenate-blend other

c If a methanol blend is used, it should contain no more than 5% methanol (methyl alcohol, wood alcohol). It should also contain a suitable amount of appropriate cosolvents and corro- sion inhibitors. If not properly formu- lated with appropriate cosolvents and Technical and consumer information 9-3

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

corrosion inhibitors, such methanol blends may cause fuel system damage and/or vehicle performance problems. At this time, sufficient data is not avail- able to ensure that all methanol blends are suitable for use in NISSAN ve- hicles.

fuels,

oxygenate-blend

If any driveability problems such as engine stall- ing and difficult hot-starting are experienced after using immediately change to a non-oxygenate fuel or a fuel with a low blend of MTBE. Take care not to spill gasoline during refu- eling. Gasoline containing oxygenates can cause paint damage. Aftermarket fuel additives NISSAN does not recommend the use of any aftermarket fuel additives (for example, fuel injec- tor cleaner, octane booster, intake valve deposit removers, etc.) which are sold commercially. Many of these additives intended for gum, varnish or deposit removal may contain active solvents or similar ingredients that can be harmful to the fuel system and engine. Octane rating tips Using unleaded gasoline with an octane rating lower than recommended can cause 9-4 Technical and consumer information

persistent, heavy (cid:147)spark knock.(cid:148) ((cid:147)Spark knock(cid:148) is a metallic rapping noise.) If se- vere, this can lead to engine damage. If you detect a persistent heavy spark knock even when using gasoline of the stated octane rating, or if you hear steady spark knock while holding a steady speed on level roads, have a NISSAN dealer correct the condition. Failure to correct the condition is misuse of the vehicle, for which NISSAN is not responsible. Incorrect in spark knock, after-run and/or overheating, which may cause excessive fuel consumption or engine damage. If any of the above symptoms are en- countered, have your vehicle checked at a NISSAN dealer. However, now and then you may notice light spark knock for a short time while accelerating or driving up hills. This is not a cause for concern, because you get the greatest fuel benefit when there is light spark knock for a short time under heavy engine load.

ignition timing may result

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

ENGINE OIL AND OIL FILTER RECOMMENDATION Selecting the correct oil It is essential to choose engine oil with the cor- rect quality and viscosity to ensure satisfactory engine life and performance. NISSAN recom- mends the use of a low friction oil (energy con- serving oil) in order to improve fuel economy and conserve energy. Oils which do not have the specified quality label should not be used as they could cause engine damage.

Only those engine oils with the American Petro- leum Institute (API) CERTIFICATION MARK on

WTI0033
the front of the container should be used. This type of oil supersedes the existing API SG, SH, or SJ and Energy Conserving I & II categories.

If you cannot find engine oil with the API CERTI- FICATION MARK, use API grade SG/SH, Energy Conserving I & II or API grade SJ or SL, Energy Conserving oil. An oil with a single designation SG or SH, or in combination with other catego- ries (for example, SG/CC or SG/CD) may also be used if one with the API CERTIFICATION MARK cannot be found. An ILSAC grade GF-I, GF-II & GF-III oil can also be used.

NISSAN recommends mineral based oils. These oils must, however, meet the API quality and SAE viscosity ratings specified for your vehicle. Oil additives NISSAN does not recommend the use of oil additives. The use of an oil additive is not neces- sary when the proper oil type is used and main- tenance intervals are followed. Oil which may contain foreign matter or has been previously used should not be used. Oil viscosity The engine oil viscosity or thickness changes with temperature. Because of this, it is important to select the engine oil viscosity based on the temperatures at which the vehicle will be oper- ated before the next oil change. The chart (cid:147)Rec- ommended SAE viscosity number(cid:148) shows the recommended oil viscosities for the expected ambient temperatures. Choosing an oil viscosity other than that recommended could cause seri- ous engine damage. Selecting the correct oil filter Your new NISSAN vehicle is equipped with a high-quality genuine NISSAN oil filter. When re- placing, use a genuine NISSAN oil filter or its equivalent for the reason described in (cid:147)Change intervals(cid:148).

Technical and consumer information 9-5

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

Change intervals The oil and oil filter change intervals for your engine are based on the use of the specified quality oils and filters. Using engine oil and filters that are not of the specified quality, or exceeding recommended oil and filter change intervals could reduce engine life. Damage to the engine caused by improper maintenance or use of incor- rect oil and filter quality and/or viscosity is not covered by the NISSAN new vehicle warranty. Your engine was filled with a high-quality engine oil when it was built. You do not have to change the oil before the first recommended change interval. Oil and filter change intervals depend upon how you use your vehicle. Operation under the following conditions may require more frequent oil and filter changes: c repeated short distance driving at cold out-

side temperatures

c driving in dusty conditions c extensive idling c towing a trailer

9-6 Technical and consumer information

ATI1028

RECOMMENDED SAE VISCOSITY NUMBER c SAE 5W-30 viscosity oil is preferred for all temperatures. SAE 10W-30 or SAE 10W-40 viscosity oils may be used if the ambient temperature is above 0(cid:176)F (-18(cid:176)C).

AIR CONDITIONER SYSTEM REFRIGERANT AND LUBRICANT RECOMMENDATIONS The air conditioner system in your NISSAN vehicle must be charged with the refriger- ant HFC-134a (R-134a) and the lubricant, NISSAN A/C system oil Type R or the exact equivalents.

CAUTION

The use of any other refrigerant or lubri- cant will cause severe damage to the air conditioning system and will require the replacement of all air conditioner system components.

The refrigerant HFC-134a (R-134a) in your NISSAN vehicle does not harm the earth(cid:146)s ozone layer. Although this refrigerant does not affect the earth(cid:146)s atmosphere, certain government regula- tions require the recovery and recycling of any refrigerant during automotive air conditioner sys- tem service. A NISSAN dealer has the trained technicians and equipment needed to recover and recycle your air conditioner system refriger- ant. Contact a NISSAN dealer when servicing your air conditioner system.

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

SPECIFICATIONS

ENGINE

Model Type Cylinder arrangement Bore x Stroke Displacement Firing order Idle speed Ignition timing degree (B.T.D.C.) at idle speed CO percentage at idle speed

in (mm) cu in (cm3)

rpm degree/rpm [No air] %

KA24DE Gasoline, 4-cycle 4-cylinder in-line 3.504 x 3.780 (89. x 96.0) 145.78 (2,389) 1(cid:150)3(cid:150)4(cid:150)2

VG33E/VG33ER Gasoline, 4-cycle 6-cylinder, V-slanted at 60(cid:176) 3.602 x 3.268 (91.5 x 83.0) 199.84 (3,275) 1(cid:150)2(cid:150)3(cid:150)4(cid:150)5(cid:150)6

See the (cid:147)Emission Control label(cid:148) on the underside of the hood.

Spark plug

Spark plug gap (Nominal) Camshaft operation Generator belt size

Width x Length

PFR5G-11 (Standard)*1
PFR6G-11 (Cold)*1

in (mm)

0.043 (1.1) Timing chain

Except Supercharger PFR5G-11 (Standard)*1
PFR6G-11 (Cold)*1
PFR4G-11 (Hot) *1
0.043 (1.1) Timing belt*2

in (mm)

0.413 x 35.63 (10.5 x 905)

0.701 x 31.69 (17.8 x 805)

Supercharger PFR6G-11 (Standard)*1
PFR7G-11 (Cold)*1
PFR5G-11 (Hot) *1

*1: Always check with the Parts Department at a NISSAN dealer for the latest parts information. *2: Periodic maintenance is necessary. See (cid:147)Periodic maintenace schedules(cid:148) in the (cid:147)NISSAN Service and Maintenace Guide.(cid:148) The spark ignition system of this vehicle meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Technical and consumer information 9-7

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

WHEELS AND TIRES

4X2

King Cab:

Crew Cab:

4X4

King Cab:

Crew Cab:

*Not available with KA24DE engine.

XE

SE SC XE

SE SC XE

SE SC

XE

SE SC

9-8 Technical and consumer information

Road wheel/offset in (mm) 15X6JJ/1.18 (30) Steel 15X7JJ/0.79 (20) Alloy 15X7JJ/1.18 (30) Steel* 15X7JJ/1.57 (40) Alloy* 16X7JJ/1.57 (40) Alloy 17X7JJ/1.57 (40) Alloy 15X7JJ/1.18 (30) Alloy 15X7JJ/1.57 (40) Alloy 16X7JJ/1.57 (40) Alloy 17X7JJ/1.57 (40) Alloy 15X7JJ/1.18 (30) Steel 15X7JJ/1.57 (40) Alloy 16X7JJ/1.57 (40) Alloy 16X7JJ/1.57 (40) Alloy 17X7JJ/1.57 (40) Alloy 15X7JJ/1.18 (30) Alloy 15X7JJ/1.57 (40) Alloy 16X7JJ/1.57 (40) Alloy 16X7JJ/1.57 (40) Alloy 17X7JJ/1.57 (40) Alloy

Tire P225/70R15
P225/70R15
P265/70R15* P265/70R15* P255/65R16
P265/55R17
P265/70R15
P265/70R15
P255/65R16
P265/55R17
P265/70R15
P265/70R15
P265/70R16
P265/70R16
P265/65R17
P265/70R15
P265/70R15
P265/70R16
P265/70R16
P265/65R17

Spare tire size T135/90D16
T135/90D16
P265/70R15* P265/70R15* P255/65R16
P265/55R17
P265/70R15
P265/70R15
P255/65R16
P265/55R17
P265/70R15
P265/70R15
P265/70R16
P265/70R16
P265/65R17
P265/70R15
P265/70R15
P265/70R16
P265/70R16
P265/65R17

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

DIMENSIONS AND WEIGHTS

King Cab

Long 5153 (202.9) 1725 (67.7)*2
1808 (71.2)*3,*4
1605 (63.2)*2
1694 (66.7)*3

1395 (54.9)*2
1525 (60)*3
1390 (54.7)*2
1507 (59.3)*3,*4
2950 (116.1)

Drive Type Body Wheelbase Overall length*1
Overall width

Overall height

Front tread

Rear tread

Wheelbase Gross vehicle weight rating

lb (kg)

Gross axle weight rating

Front Rear

lb (kg) lb (kg) *1: Includes rear step bumper. *2: XE with KA24DE engine. *3: XE with VG33E engine. *4: SC models. *5: SE models.

2WD

Crew Cab

Short 5077 (199.9) 1808 (71.2)

Long 5532 (217.8) 1808 (71.2)

1694 (66.7)*3
1775 (69.9)*4

1694 (66.7)*3
1775 (69.9)*4

Crew Cab

King Cab

Long 5153 (202.9) 1808 (71.2)

1694 (66.7)

1525 (60)

1525 (60)

1525 (60)

4WD

Crew Cab

Short 5077 (199.9) 1808 (71.2)

1704 (67.1)*3
1823 (71.8)*4
1836 (72.3)*5
1525 (60)

Unit: mm (in)

Crew Cab

Long 5532 (217.8) 1808 (71.2)

1704 (67.1)*3
1823 (71.8)*4
1836 (72.3)*5
1525 (60)

1507 (59.3)

1507 (59.3)

1507 (59.3)

1507 (59.3)

1507 (59.3)

2950 (116.1) See the (cid:147)F.M.V.S.S. certification label(cid:148) on the driver side door jamb pillar.

3329.9 (131.1)

2950 (116.1)

2950 (116.1)

3329.9 (131.1)

Technical and consumer information 9-9

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

VEHICLE IDENTIFICATION

WTI0054
VEHICLE IDENTIFICATION NUMBER (VIN) PLATE The vehicle identification number (VIN) plate is attached as shown. This number is the identifica- tion for your vehicle and is used in the vehicle registration.

WTI0065
VEHICLE IDENTIFICATION NUMBER (chassis number) The vehicle identification number is located as shown.

WHEN TRAVELING OR REGISTERING YOUR VEHICLE IN ANOTHER COUNTRY When planning to drive your NISSAN ve- hicle in another country, you should first find out if the fuel available is suitable for your vehi- cle(cid:146)s engine. Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline. There- fore, avoid taking your vehicle to areas where appropriate fuel is not available. When transferring the registration of your vehicle to another country, state, province or district, it may be necessary to modify the vehicle to meet local laws and regulations. The laws and regulations for motor vehicle emis- sion control and safety standards vary according to the country, state, province or district; there- fore, vehicle specifications may differ. When any vehicle is to be taken into an- other country, state, province or district and registered, its modifications, transpor- tation, and registration are the responsibil- ity of the user. NISSAN is not responsible for any inconvenience that may result.

9-10 Technical and consumer information

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

WTI0056

WTI0057

WTI0058

KA24DE engine ENGINE SERIAL NUMBER The number is stamped on the engine as shown.

VG33E/VG33ER engine

F.M.V.S.S. CERTIFICATION LABEL The Federal Motor Vehicle Safety Standard (F.M- .V.S.S.) certification label is affixed as shown. This label contains valuable vehicle information, such as: Gross Vehicle Weight Ratings (GVWR), Gross Axle Weight Rating (GAWR), month and year of manufacture, Vehicle Identification Num- ber (VIN), etc. Review it carefully.

Technical and consumer information 9-11

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

WTI0059

WTI0060

EMISSION CONTROL INFORMATION LABEL The emission control tached as shown.

information label

is at-

TIRE PLACARD The cold tire pressure is shown on the tire plac- ard. The tire placard is located as shown.

WTI0061
AIR CONDITIONER SPECIFICATION LABEL The air conditioner specification label is affixed as shown.

9-12 Technical and consumer information

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

INSTALLING FRONT LICENSE PLATE

VEHICLE LOADING INFORMATION

Use the following steps to mount the front license plate: 1. Remove the two screw gromments from the

glove box.

2. Carefully drill a hole using a 0.39 inch (10
mm) drill bit at each location mark (small dimple) on the bumper fascia sA . Insert one grommet into each hole sB . Insert a small screwdriver into the grommet to turn the plastic insert. Install the license plate with two M5 x 25 mm bolts sC .

3. 4.

5.

WARNING

c It is extremely dangerous to ride in a cargo area inside a vehicle. In a colli- sion, people riding in these areas are more likely to be seriously injured or killed.

c Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.

c Be sure everyone in your vehicle is in a

seat and using a seat belt properly.

TERMS It is important to familiarize yourself with the fol- lowing terms before loading your vehicle: c Curb Weight (actual weight of your vehicle) - vehicle weight including: standard and op- tional equipment, fluids, emergency tools, and spare tire assembly. This weight does not include passengers and cargo.

c GVW (Gross Vehicle Weight) - curb weight plus the combined weight of passengers and cargo.

c GVWR (Gross Vehicle Weight Rating) - maximum total weight (load) limit specified for the vehicle.

WTI0066

Technical and consumer information 9-13

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

c GAWR (Gross Axle Weight Rating) - maxi- mum weight (load) limit specified for the front or rear axle.

DETERMINING VEHICLE LOAD CAPACITY The load capacity of this vehicle is determined by weight, not by available cargo space. For ex- ample, a roof rack, bike carrier, or similar equip- ment does not increase load carrying capacity of your vehicle. To determine vehicle load capacity: Vehicle weight can be determined by using a commercial-grade scale, found at places such as a truck stop, gravel quarry, grain elevator, or a scrap metal recycling facility. 1. Determine the curb weight of your vehicle. 2. Compare the curb weight amount to the GVWR specified for your vehicle to deter- mine how much more weight your vehicle can carry.

3. After loading (cargo and passengers), re- weigh your vehicle to determine if either GVWR or GAWR for your vehicle is ex- ceeded. remove cargo as necessary. If either the front or rear GAWR is exceeded, shift the load or remove cargo as necessary.

If GVWR is exceeded,

9-14 Technical and consumer information

WTI0067

SECURING THE LOAD For your convenience, tie down hooks are placed at each corner of the truck box. These may be used to help secure cargo loaded into the truck box.

WARNING

c Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. In a sudden stop or collision, unsecured cargo could cause personal injury.

c Do not load your vehicle any heavier than the GVWR or the maximum front and rear GAWRs. If you do, parts of your vehicle can break, tire damage could occur, or it can change the way your vehicle handles. This could result in loss of control and cause personal injury.

LOADING TIPS c The GVW must not exceed GVWR or GAWR as specified on the F.M.V.S.S. Cer- tification Label.

c Do not load the front and rear axle to the

GAWR. Doing so will exceed the GVWR.

c Loads should be spread out, and cargo should be properly secured. Large or heavy objects should be placed toward the front of the truck box to help prevent shifting.

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

WARNING

Overloading not only can shorten the life of your vehicle and the tire, but can also cause unsafe vehicle handling and longer braking distances. This may cause a pre- mature tire failure which could result in a serious accident and personal injury. Fail- ures caused by overloading are not cov- ered by the vehicle(cid:146)s warranty.

TRUCK-CAMPER LOADING INFORMATION

CREW CAB MODELS Crew Cab models should not be used to carry a slide-in camper. KING CAB MODELS This information is provided for you to properly install a slide-in camper and is based on the National Highway Traffic Safety Administration regulations. It is recommended that, before in- stalling the camper, you carefully read the follow- ing information and ensure that the camper meets the specifications. This information may not apply to some Canada model vehicles. SPECIAL BODY VEHICLES Some vehicles are equipped with commercial or camper bodies. However, this Owner(cid:146)s Manual does not cover these options. For further infor- mation, please refer to the body manufacturer(cid:146)s instruction manual.

ATI0703

LOCATION FOR CENTER OF GRAVITY The illustration indicates the recommended cargo center of gravity location zone. King Cab: L1 = 960.1 mm (37.8 in), L2 = 1,087.1 mm (42.8 in)

WARNING

Improper loading may be dangerous. If a load is too far back, it can affect handling characteristics. If a load is too far forward, the front axle may be overloaded.

Technical and consumer information 9-15

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

WARNING

Overloading or improper loading can ad- versely affect vehicle handling, braking and performance and may lead to accidents. VEHICLE LOAD WEIGHT CAPACITY The vehicle load weight capacity shown on fol- lowing charts indicate the maximum total weight of passengers, optional equipment (air condition- ing, trailer hitch, etc) and cargo that your vehicle is designed to carry. Before driving a loaded vehicle, confirm that you do not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR) for your vehicle. See (cid:146)(cid:146)Vehicle Loading Information(cid:146)(cid:146) earlier in this section for details. Also check tires for proper inflation pressures. See the tire placard.

ATI0705
When the truck is used to carry a slide-in camper, the total cargo load of the truck consists of the camper manufacturer(cid:146)s weight figure, plus: c the weight of installed additional camper included in the camper

equipment not manufacturer(cid:146)s weight figure, c the weight of camper cargo, c and the weight of occupants in the camper. The total cargo load should not exceed the truck(cid:146)s pay load weight rating and the camper(cid:146)s center of gravity should fall within the truck(cid:146)s recommended center of gravity location zone when installed. 9-16 Technical and consumer information

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

Vehicle Load Weight Capacity (KA24DE Engine)

2WD

King Cab

Manual Transmission

Automatic Transmission

XE

XE

lbs 1312
1312
1312

kg 595
595
595

lbs 1312
1312
1312

kg 595
595
595

Federal California Canada

K/C

K/C

lbs 1191
1191
1191

lbs 1169
1169
N/A

kg 540
540
540

kg 530
530
N/A

Federal California Canada

Federal California Canada

2WD

C/C S/B

lbs 1036
1036
N/A

kg 470
470
N/A

2WD

C/C S/B

lbs 1014
1014
N/A

kg 460
460
N/A

Vehicle Load Weight Capacity (VG33E Engine)

C/C L/B

K/C

lbs 1103
1103
1103

kg 500
500
500

lbs 1147
1147
1147

Vehicle Load Weight Capacity (VG33ER Engine)

C/C L/B

K/C

lbs 1080
1080
1080

kg 490
490
490

lbs 1080
1080
N/A

kg 520
520
520

kg 490
490
N/A

4WD

C/C S/B

4WD

C/C S/B

kg 440
440
N/A

kg 415
415
N/A

lbs 970
970
N/A

lbs 915
915
N/A

C/C L/B

lbs 1080
1080
1080

C/C L/B

lbs 1025
1025
1025

kg 490
490
490

kg 465
465
465

Technical and consumer information 9-17

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

MEASUREMENT OF WEIGHTS Secure loose items to prevent weight shifts that could affect the balance of your vehicle. When the vehicle is loaded, drive to a scale and weigh the front and the rear wheels separately to deter- mine axle loads. Individual axle loads should not exceed either of the gross axle weight ratings (GAWR). The total of the axle loads should not exceed the gross vehicle weight rating (GVWR). These ratings are given on the vehicle certifica- tion label. If weight ratings are exceeded, move or remove items to bring all weights below the rat- ings.

TOWING A TRAILER

Your new vehicle was designed to be used pri- marily to carry passengers and cargo. Remember that towing a trailer places additional loads on your vehicle(cid:146)s engine, drive train, steering, brak- ing and other systems. A Nissan Trailer Towing Guide (U.S. only) is available from a NISSAN dealer. This guide in- cludes information on trailer towing ability and the special equipment required for proper towing. MAXIMUM LOAD LIMITS Maximum trailer loads Never allow the total trailer load to exceed the value following Towing Load/Specification Chart found later in this sec- tion. The total trailer load equals trailer weight plus its cargo weight. c When towing a trailer load of 1,000 lbs. (454 kg) or more, trailers with a brake sys- tem MUST be used.

specified in

the

The maximum GCWR (Gross Combined Weight Rating) should not exceed the value specified in the following Towing Load/ Specification Chart.

The GCWR equals the combined weight of the towing vehicle (including passengers and cargo) plus the total trailer load. Towing loads greater

9-18 Technical and consumer information

than these or using improper towing equipment could adversely affect vehicle handling, braking and performance. The ability of your vehicle to tow a trailer is not only related to the maximum trailer loads, but also the places you plan to tow. Tow weights appro- priate for level highway driving may have to be reduced on very steep grades or in low traction situations (for example, on slippery boat ramps). Temperature conditions can also affect towing. For example, towing a heavy trailer in high outside temperatures on graded roads can affect engine performance and cause overheating.

CAUTION

Vehicle damage resulting from improper towing procedures are not covered by NISSAN warranties. A NISSAN Trailer Towing Guide (U.S. only) containing infor- mation on trailer towing ability and the special equipment required may be ob- tained from a NISSAN dealer.

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

CA0009

CA0036

Tongue load Keep the tongue load between 9 - 11 percent of the total trailer load within the maximum tongue load limits shown in the following Towing Load/Specification Chart. If the tongue load be- comes excessive, rearrange cargo to allow for proper tongue load.

Maximum gross vehicle weight/maximum gross axle weight The gross vehicle weight of the towing vehicle must not exceed the gross vehicle weight rating (GVWR) shown on the F. M. V. S. S. certification label. The gross vehicle weight equals the com- bined weight of the unloaded vehicle, passen- gers, luggage, hitch, trailer tongue load and any other optional equipment. In addition, front or rear gross axle weight must not exceed the gross axle weight rating (GAWR) shown on the F. M. V. S. S. certification label.

Technical and consumer information 9-19

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

TOWING LOAD/SPECIFICATION CHART

Model

2WD

Unit: lbs (kg)

4WD

Weight

M/T (4 cyl)

A/T (4 cyl)

M/T (V6)

A/T (V6)

M/T (V6)

A/T (V6)

Maxiumum Trailer

Weight*1

3,001 (1,361)

2,000 (907)

Maximum Tongue Load

300 (136)

200 (91)

Except Supercharger

Except Supercharger

Except S/C C/C L/B

Except S/C C/C L/B

3,500 (1,588) Supercharger 3,400 (1,542)

5,000 (2,268) Supercharger 4,902 (2,223)

Except Supercharger

Except Supercharger

350 (159)

Supercharger

340 (154)

500 (227)

Supercharger

490 (222)

3,500 (1,588) S/C C/C L/B 3,400 (1,542)

350 (159)

S/C C/C L/B

340 (154)

5,000 (2,268) S/C C/C L/B 4,902 (2,223)

Except S/C C/C L/B

500 (227)

S/C C/C L/B

490 (222)

Gross Combined

Weight Rating Recommended Equipment*2

7,000 (3,175)

6,000 (2,721)

8,002 (3,629)

9,500 (4,309)

8,002 (3,629)

9,500 (4,309)

Sway Control Device

(cid:151)

Sway Control Device

Sway Control Device

Sway Control Device

Sway Control Device

*1: All towing above 1,000 lb (454 kg) requires the use of trailer brakes. NISSAN recommends the use of a tandem axle trailer whenever towing above 3,000 lb (1,361 kg). *2: A sway control device is recommended for all towing above 2,000 lb (907 kg). Sway control devices are not offered by NISSAN. See a professional trailer/hitch outlet for a prop- erly designed sway control device for your trailer. M/T = Manual Transmission A/T = Automatic Transmission 2WD = 2-wheel drive 4WD = 4-wheel drive

C/C = Crew Cab L/B = Long Bed S/C = Supercharger

9-20 Technical and consumer information

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

TOWING SAFETY Trailer hitch Check the towing capacity of your bumper hitch or receiver-type frame mounted hitch. Choose a proper hitch for your vehicle and trailer. A genuine Nissan trailer hitch is available from your NISSAN dealer. Make sure the trailer hitch is securely attached to the vehicle to help avoid personal injury or property damage due to sway caused by crosswinds, rough road surfaces or passing trucks.

CAUTION

c Special hitches which include frame re- inforcements are required for towing above 2,000 lb (907 kg). Suitable genu- ine NISSAN hitches for pickup trucks and sport utility vehicles are available at a NISSAN dealer.

c The hitch should not be attached to or the impact-

the operation of

affect absorbing bumper.

c Do not use axle-mounted hitches. c Do not modify the vehicle exhaust sys- tem, brake system, etc. to install a trailer hitch.

c To reduce the possibility of additional damage if your vehicle is struck from the rear, where practical, remove the hitch and/or receiver when not in use. c After the hitch is removed, seal the bolt holes to prevent exhaust fumes, water or dust from entering the passenger compartment.

c Regularly check that all trailer hitch mounting bolts are securely mounted.

Tire pressures c When towing a trailer, inflate the vehicle tires to the recommended cold tire pressure indi- cated on the tire placard.

c Trailer tire condition, size,

load rating and proper inflation pressure should be in accor- dance with the trailer and tire manufacturer(cid:146)s specifications.

Safety chains Always use suitable safety chains between your vehicle and the trailer. The safety chains should be crossed and should be attached to the hitch, not to the vehicle bumper or axle. Be sure to leave enough slack in the chains to permit turning corners.

Trailer lights

CAUTION

When splicing into the vehicle electrical system, a commercially available power- type module/converter must be used to provide power for all trailer lighting. This unit uses the vehicle battery as a direct power source for all trailer lights while using the vehicle tail light, stoplight and turn signal circuits as a signal source. The module/converter must draw no more that 15 milliamps from the stop and tail lamp circuits. Using a module/converter that exceeds these power requirements may damage the vehicle(cid:146)s electrical sys- tem. See a reputable trailer dealer to ob- tain the proper equipment and to have it installed.

Trailer lights should comply with federal and/or local regulations. For assistance in hooking up trailer lights, contact a NISSAN dealer or repu- table trailer dealer. Trailer brakes If your trailer is equipped with a braking system, make sure it conforms to federal and/or local regulations and that it is properly installed.

Technical and consumer information 9-21

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

WARNING

Never connect a trailer brake system di- rectly to the vehicle brake system.

Pre-towing tips c Be certain your vehicle maintains a level position when a loaded and/or unloaded trailer is hitched. Do not drive the vehicle if it has an abnormal nose-up or nose-down condition; check for improper tongue load, overload, worn suspension or other possible causes of either condition.

c Always secure items in the trailer to prevent

load shift while driving.

c Be certain your rearview mirrors conform to all federal, state or local regulations. If not, install any mirrors required for towing before driving the vehicle. Trailer towing tips In order to gain skill and an understanding of the vehicle(cid:146)s behavior, you should practice turning, stopping and backing up in an area which is free from traffic. Steering stability and braking perfor- mance will be somewhat different than under normal driving conditions. c Always secure items in the trailer to prevent

load shift while driving.

9-22 Technical and consumer information

c Avoid abrupt starts, acceleration or stops. c Avoid sharp turns or lane changes. c Always drive your vehicle at a moderate speed. Some states or provinces have spe- cific speed limits for vehicles that are towing trailers. Obey the local speed limits.

c When backing up, hold the bottom of the steering wheel with one hand. Move your hand in the direction in which you want the trailer to go. Make small corrections and back up slowly. If possible, have someone guide you when you are backing up.

c Always block the wheels on both vehicle and trailer when parking. Parking on a slope is not recommended; however, if you must do so, and if your vehicle is equipped with an automatic transmission, first block the wheels and apply the parking brake, and then move the transmission shift selector lever into the P (Park) position. If you move the shift selector lever to the P (Park) posi- tion before blocking the wheels and applying the parking brake, transmission damage could occur.

c When going down a hill, shift into a lower gear and use the engine braking effect. When going up a long grade, downshift the transmission to a lower gear and reduce

speed to reduce chances of engine over- loading and/or overheating.

c If the engine coolant rises to an extremely high temperature when the air conditioner system is on, turn off the air conditioner. Coolant heat can be additionally vented by opening the windows, switching the fan control to high and setting the temperature control to the HOT position.

c Trailer towing requires more fuel than normal

circumstances.

c Avoid towing a trailer for your vehicle(cid:146)s first

500 miles (805 km).

c For the first 500 miles that you do tow, do

not drive over 50 MPH (80 km/h).

c Have your vehicle serviced more often than at intervals specified in the recommended Maintenance Schedule in the (cid:147)NISSAN Ser- vice and Maintenance Guide(cid:148).

c When making a turn, your trailer wheels will be closer to the inside of the turn than your vehicle wheels. To compensate for this, make a larger than normal turning radius during the turn.

c Crosswinds and rough roads will adversely affect vehicle/trailer handling, possibly caus- ing vehicle sway. When being passed by

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

larger vehicles, be prepared for possible changes in crosswinds that could affect ve- hicle handling. If swaying does occur, firmly grip the steering wheel, steer straight ahead, and immediately (but gradually) reduce ve- hicle speed. This combination will help sta- bilize the vehicle. Never increase speed.

c Be careful when passing other vehicles. Passing while towing a trailer requires con- siderably more distance than normal pass- ing. Remember, the length of the trailer must also pass the other vehicle before you can safely change lanes.

c To maintain engine braking efficiency and electrical charging performance, do not use 5th gear (manual transmission) or overdrive (automatic transmission).

c Avoid holding the brake pedal down too long or too frequently. This could cause the brakes to overheat, resulting in reduced braking efficiency.

c Increase your following distance to allow for greater stopping distances while towing a trailer. Anticipate stops and brake gradually. c Do not use cruise control while towing a trailer. c Check your hitch, trailer wiring harness con- nections, and trailer wheel lug nuts after 50
miles (80 km) of travel and at every break.

c When stopped in traffic for long periods of time in hot weather, put the vehicle in the P (Park) position.

When towing a trailer, transmission oil/fluid should be changed more fre- quently. For additional information, see the (cid:147)Maintenance and do-it-yourself(cid:148) section earlier in this manual. FLAT TOWING Towing your vehicle with all four wheels on the ground is sometimes called flat towing. This method is sometimes used when towing a vehicle behind a recreational vehicle, such as a motor home.

CAUTION

c Failure to follow these guidelines can result in severe transmission damage. c Whenever flat towing your vehicle, al-

ways tow forward, never backward.

c DO NOT tow any automatic transmis- sion vehicle with all four wheels on the ground (flat towing). Doing so WILL DAMAGE internal transmission parts due to lack of transmission lubrication.

c For emergency towing procedures refer to (cid:147)Towing recommended by NISSAN(cid:148) in the (cid:147)In case of emergency(cid:148) section of this manual.

Automatic Transmission To tow a vehicle equipped with an automatic transmission, an appropriate vehicle dolly MUST be placed under the towed vehicle(cid:146)s drive wheels. Always follow the dolly manufacturer(cid:146)s recommendations when using their product. Manual Transmission c Always tow with the manual transmission in

Neutral.

c On four-wheel drive vehicles, place the transfer case in the 2H range. Failure to do so will cause the powertrain to bind up.

c After towing 500 miles (805 km), start and idle the engine with the transmission in Neu- tral for two minutes. Failure to idle the engine after every 500 miles (805 km) of towing may cause damage to internal transmission parts.

Technical and consumer information 9-23

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

UNIFORM TIRE QUALITY GRADING

DOT (Department of Transportation) Quality Grades: All passenger car tires must conform to federal safety requirements in addition to these grades.

Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A

Treadwear

Treadwear grade is a comparative rating based on tire wear rate when tested under controlled conditions on specified government test courses. For example, a tire graded 150 would wear one and a half (1-1/2) times as well on the govern- ment course as a tire graded 100. However, relative tire performance depends on actual driv- ing conditions, and may vary significantly due to variations in driving habits, service practices and differences in road characteristics and climate.

Traction AA, A, B and C

The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire(cid:146)s ability to stop on wet pavement as mea- sured under controlled conditions on specified government test surfaces of asphalt and con- crete. A tire marked C may have poor traction performance. 9-24 Technical and consumer information

WARNING

WARNING

The temperature grade for this tire is es- tablished for a tire that is properly inflated and not overloaded. Excessive speed, under-inflation, or excessive loading, ei- ther separately or in combination, can cause heat build-up and possible tire failure.

The traction grade assigned to your ve- hicle tires is based on straight-ahead braking traction tests and does not in- clude acceleration, cornering, hydroplan- ing or peak traction characteristics.

Temperature A, B and C

Temperature grades are A (the highest), B, and C. They represent a tire(cid:146)s resistance to heat build-up, and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high tem- perature can cause tire material to degenerate, reducing tire life. Excessive temperatures can lead to sudden tire failure. Grade C corresponds to a performance level which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades A and B rep- resent higher levels of performance on laboratory test wheels than the minimum required by law.

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

EMISSION CONTROL SYSTEM WARRANTY

REPORTING SAFETY DEFECTS (US only)

READINESS FOR INSPECTION/ MAINTENANCE (I/M) TEST

Your NISSAN vehicle is covered by the following emission warranties: For USA 1. Emission Defects Warranty 2. Emissions Performance Warranty Details of these warranties may be found with other vehicle warranties in your Warranty Infor- mation Booklet which comes with your NISSAN vehicle. If you did not receive a Warranty Informa- tion Booklet, or it is lost, you may obtain a re- placement by writing to: c Nissan North America, Inc.

Consumer Affairs Department P.O. Box 191
Gardena, CA 90248-0191

For Canada Emission Control System Warranty Details of these warranties may be found with other vehicle warranties in your Warranty Infor- mation Booklet which comes with your NISSAN vehicle. If you did not receive a Warranty Informa- tion Booklet, or it is lost, you may obtain a re- placement by writing to: c Nissan Canada Inc. 5290 Orbitor Drive Mississauga, Ontario, L4W 4Z5

If you believe that your vehicle has a de- fect which could cause a crash or could cause injury or death, you should immedi- ately inform the National Highway Traffic Safety Administration (NHTSA) in addi- tion to notifying NISSAN. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot be- come involved in individual problems be- tween you, your dealer, or NISSAN. To contact NHTSA, you may call the Auto Safety Hotline toll-free at 1-888-327- 4236. You may also write to: NHTSA, U.S. Department Transportation, Washington, D.C. 20590. You can also obtain other information about motor ve- hicle safety from the Hotline. You may notify NISSAN by contacting our Consumer Affairs Department, toll-free, at 1-800-NISSAN-1.

of

Due to legal requirements in some states and Canadian Provinces, your vehicle may be re- quired to be in what is called the (cid:147)ready condi- tion(cid:148) for an Inspection/Maintenance (I/M) test of the emission control system.

The vehicle is set to the (cid:147)ready condition(cid:148)(cid:146) when it is driven through certain driving patterns. Usually, the ready condition can be obtained by ordinary usage of the vehicle.

If a powertrain system component is repaired or the battery is disconnected, the vehicle may be reset to a (cid:147)not ready(cid:148) condition. Before taking the I/M test, drive the vehicle through the following pattern to set the vehicle to the ready condition. If you cannot or do not want to perform the driving pattern, a NISSAN dealer can conduct it for you.

WARNING

Always drive the vehicle in a safe and prudent manner according to traffic con- ditions and obey all traffic laws.

1. Start the engine when the engine coolant temperature gauge needle points to C. Al- low the engine to idle until the gauge needle points between the C and H (normal oper- ating temperature).

Technical and consumer information 9-25

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

DYNAMOMETER TESTING FOR INSPECTION/MAINTENANCE (I/M) TEST (US only) Due to legal requirements in some states/areas, your vehicle may be tested for emissions on a dynamometer. The transfer control lever (if so equipped) MUST be in the 2H position for I/M testing on a two wheel dynamometer.

WARNING

c If the transfer control lever is not in the 2H position during the dynamometer I/M testing, the vehicle could come off the dynamometer and cause serious personal injury and/or body damage to the vehicle.

c Serious damage will occur to the 4WD system if the transfer control lever is not in the 2H position.

EVENT DATA RECORDERS

Your vehicle is equipped with a variety of comput- ers that monitor and control a number of systems to optimize performance and help service techni- cians with diagnosis and repair. Depending on the equipment on your vehicle, some of the com- puters monitor emission control systems, braking systems and air bag systems, just to name a few. Some data about vehicle operation may be stored in the computers for use during servicing. Other data may be stored if a crash event occurs. For example, air bag readiness, air bag perfor- mance, and seat belt use by the driver or passen- ger may be recorded, depending on vehicle equipment. These types of systems are some- times called Event Data Recorders. Special equipment can be used to access the electronic data that may be stored in the vehicle(cid:146)s computers (sounds are not recorded). NISSAN and NISSAN dealers have equipment to access some of this data; others may also have this equipment. The data may be retrieved during routine vehicle servicing or for special research. It might also be accessed with the consent of the vehicle owner or lessee, in response to a request by law enforcement, or as otherwise required or permitted by law.

2. Accelerate the vehicle to 55 mph (88 km/h), then quickly release the accelerator pedal completely and keep it released for at least 6
seconds.

3. Quickly depress the accelerator pedal for a moment, then drive the vehicle at a speed of 53 - 60 mph (85 - 97 km/h) for at least 5
minutes.

4. Stop the vehicle. 5. Accelerate the vehicle to 35 mph (55 km/h)

and maintain the speed for 20 seconds.

6. Repeat steps 4 through 5 at least three

times.

7. Accelerate the vehicle to 55 mph (88 km/h) and maintain the speed for at least 3 min- utes.

8. Stop the vehicle and turn the engine off. 9. Repeat steps 1 through 8 at least one more

time.

If steps 1 through 7 are interrupted, repeat the preceding step. Any safe driving mode is accept- able between steps. Do not stop the engine until step 7 is completed. If you cannot or do not want to perform the driving pattern, a NISSAN dealer can conduct it for you.

9-26 Technical and consumer information

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

OWNER(cid:146)S MANUAL/SERVICE MANUAL ORDER INFORMATION

A genuine NISSAN Service Manual is the best source of service and repair information for your vehicle. Filled with wiring diagrams, illustrations and step-by-step diagnostic and adjustment pro- cedures, this manual is the same one used by the factory trained technicians working at NISSAN dealerships. Also available are genuine NISSAN Owner(cid:146)s Manuals, and genuine NISSAN Service and Owner(cid:146)s Manuals for older NISSAN models. For USA For current pricing and availability of genuine NISSAN Service Manuals for the 2000 model year and later contact: Tweddle Litho Company 1-800-450-9491
www.nissan-techinfo.com For current pricing and availability of genuine NISSAN Service Manuals for the 1999 model year and prior, see a NISSAN dealer, or contact: Resolve Corporation 20770 Westwood Road Strongsville, OH 44136
1-800-247-5321

Technical and consumer information 9-27

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

that restrict insurance companies from authoriz- ing the use of non-genuine collision parts during the new vehicle warranty. These laws help pro- tect you, so you can take action to protect your- self. It(cid:146)s your right! If you should need further information visit us at: www.nissanusa.com.

For current pricing and availability of genuine NISSAN Owner(cid:146)s Manuals for the 2004 model year and prior, see a NISSAN dealer, or contact:

Resolve Corporation 20770 Westwood Road Strongsville, OH 44136
1-800-247-5321
For Canada

To purchase a copy of a genuine NISSAN Ser- vice Manual or Owner(cid:146)s Manual please contact your nearest NISSAN dealer. For the phone num- ber and location of a NISSAN dealer in your area call the NISSAN Information Center at 1-800- 387-0122 and a bilingual NISSAN representa- tive will assist you.

Also available are genuine NISSAN Service and Owner(cid:146)s Manuals for older NISSAN models. IN THE EVENT OF A COLLISION Unfortunately, accidents do occur. In this unlikely event, there is some important information you should know.

Many insurance companies routinely authorize the use of non-genuine collision parts in order to cut costs, among other reasons.

Insist on the use of genuine NISSAN collision parts! If you want your vehicle to be restored using parts made to NISSAN(cid:146)s original exacting specifica- tions (cid:150) if you want to help it to last and hold its resale value, the solution is simple. Tell your insurance agent and your repair shop to only use Genuine NISSAN Collision Parts. NISSAN does not warrant non-NISSAN parts, nor does NISSAN(cid:146)s warranty apply to damage caused by a non-genuine part. Using Genuine NISSAN Parts can help protect your personal safety, preserve your warranty pro- tection and maintain the resale value of your vehicle. And if your vehicle was leased, using Genuine NISSAN Parts may prevent or limit un- necessary excess wear and tear expenses at the end of your lease. NISSAN designs its hoods with crumple zones to minimize the risk that the hood will penetrate the windshield of your vehicle in an accident. Non- genuine (imitation) parts may not provide such built in safeguards. Also, non-genuine parts often show premature wear, rust and corrosion. Why should you take a chance? In over 40 states, the law says you must be advised if non-genuine parts are used to repair your vehicle. And some states have enacted laws

9-28 Technical and consumer information

Z REVIEW COPY—2004 Truck/Frontier (d22) Owners Manual (owners)—USA_English (nna) 06/09/04—tbrooks X

10 Index

Air bag

Passenger supplemental air bag ON/OFF switch and light .

Air bag (See supplemental restraint system) . Air bag warning light. Air cleaner housing filter . Air conditioner

.1-16
.1-7
.1-18, 2-13
.8-22