Login- Download PDF Manual
-
X Select ° in the character bar and press
W to confirm.
or X If the telephone basic menu is displayed, press the 6 button on COMAND Online. In both cases, the calls dialled list appears. The most recently dialled number is at the top.
X To select a call: turn cVd the COMAND
controller.
X To connect the call: press W the
COMAND controller.
Redial using the multifunction steering wheel; see the separate vehicle Owner's Manual. Using the call list or COMAND phone book X Open a call list and select an entry
(Y page 399).
or X Call up the COMAND phone book and
select an entry (Y page 396).
X To make a call: press W the COMAND
controller or the 6 button.
Select and place a call using the multifunction steering wheel; see the separate vehicle Own- er's Manual. Using speed dial presets to make a call The speed dial list contains stored entries from the phone book (Y page 401). Option 1: X Press one of the number keys for longer
than two seconds. The telephone basic menu displays the selected entry. This initiates dialling.
Option 2: X Call up the telephone basic menu:
(Y page 386)
Rconvenience telephony (Y page 388) Rtelephony via the Bluetooth® interface X Select Call lists by sliding VÆ and turn- ing cVd the COMAND controller and press W to confirm. A menu appears. X Select Speed dial preset list by turn- ing cVd the COMAND controller and press W to confirm. The speed dial list appears.
X Select the preset and press W to confirm.
The telephone basic menu displays the selected entry. This initiates dialling.
Functions available during a call Overview
Telephone operation with a single call : Person you are calling ; Symbol for active telephone connection = To switch the hands-free microphone off/
on (Y page 392)
? To send DTMF tones (not possible with all
mobile phones) (Y page 393)
A To end the call Switching the hands-free microphone on/ off This function is also available during an active phone call. X Call up the telephone basic menu:
Telephone 393
(Y page 386)
Rconvenience telephony (Y page 388) Rtelephony via the Bluetooth® interface X To switch off: select Mike off and press W to confirm. If the microphone is switched off, the dis- play shows the Q symbol and the The microphone is off message appears for a short period. X To switch on: select Mike on and press W to confirm. The Q symbol disappears. You will briefly see the The microphone is on message. Sending DTMF tones
This function is not supported by all mobile phones. Answering machines or other devices can be controlled by DTMF tones, e.g. for remote query functions. X If you would like to listen to the messages on your answering machine, for example, select the corresponding number.
X To transmit individual characters: once a connection has been established to the answering machine, select the desired characters in the character bar, pressing W to confirm each of them.
or X Press the corresponding key on the
COMAND Online number keypad. Every character selected will be transmit- ted immediately.
X To send a phone book entry as a DTMF sequence: select Name by turning cVd the COMAND controller and press W to con- firm.
X Select the desired phone book entry and
press W to confirm. The entry is sent as a DTMF character string. X To return to the call display: select Back and press W to confirm. i DTMF tones can also be transmitted using LINGUATRONIC; see the separate operat- ing instructions.
Calls with several participants Rejecting or accepting a waiting call The mobile phone network provider must sup- port and activate the call waiting function. Depending on the mobile phone used, the system behaviour differs when accepting a call. If you have a call in progress and receive another call, a new window appears in the display. You also hear a tone. You can accept or reject the call. X To reject: select Reject and press W to confirm.
or X Press the ~ button on COMAND Online or on the multifunction steering wheel. X To accept: select Accept and press W to confirm.
or X Press the 6 button on COMAND Online
or on the multifunction steering wheel. The system behaviour after accepting the incoming call depends on your mobile phone. RThe mobile phone supports the call waiting
function (via Bluetooth®) when:
394 Telephone
the previously active call is held. You can then switch back and forth between both calls (toggling) (Y page 394).
RThe mobile phone does not support the call
waiting function (via Bluetooth®) when: the previously active call is ended. This is also the case if you accept the wait- ing call using LINGUATRONIC (see the sep- arate operating instructions).
Valid in both cases: if you accept the waiting call using the mobile phone, the active call is put on hold. You then have two calls. The call you have just accepted is active. The COMAND display changes. If you con- tinue to operate functions on the mobile phone, the COMAND Online display may dif- fer from that of the mobile phone. Making a second call If the following conditions are met, you can make a further call during an existing call: Rthe function has to be supported by the
mobile phone network.
Rthe mobile phone has to support the con-
nection of a further call via Bluetooth®.
Rthe appropriate setting has to be activated
on the mobile phone.
If your mobile phone allows you to make a second call via Bluetooth®, you can make another while on the phone with someone else. This action puts the previous call on hold. The function is available.
: Symbol for making a second call
X Select symbol : by turning cVd the
COMAND controller and press W to con- firm.
or X Press the 6 button on COMAND Online. X Enter the phone number: Rmanually (Y page 391) Rusing the phone book (Y page 396) Rusing the call lists (Y page 399) Rusing speed dial (Y page 392)
Toggling You can switch back and forth between calls with this function. The function is available if your mobile phone supports the toggling function (via Bluetooth®). You can use the function if you are answering a second call or making a second call.
Switching between the active call and the call on hold : Active call ; Call on hold X Select symbol ; and press W to confirm. or X Press the 6 button on COMAND Online
or on the multifunction steering wheel. The previous call on hold is activated.
Telephone 395
X To end the active call: select ¢ in the telephone basic menu and press W to con- firm.
or X Press the ~ button on COMAND Online
or on the multifunction steering wheel. The call on hold is active.
Conference calls You can interconnect calls (active and on hold) on the mobile phone. This allows numer- ous callers to hear and speak to each other; see the mobile phone operating instructions. You can also make a further call in COMAND Online (Y page 394).
Transferring a call From the hands-free system to the mobile phone If you want to continue a call in private mode, you will need to perform the necessary steps on the mobile phone (see the mobile phone operating instructions). When using conveni- ence telephony, you may have to remove the mobile phone from the bracket or switch to private mode on the mobile phone. This depends on the type of mobile phone bracket (see the mobile phone operating instruc- tions). From the mobile phone to the hands-free system If you want to continue a call using COMAND Online, you will need to perform the necessary steps on the mobile phone (see the mobile phone operating instructions). In convenience telephony mode, depending on the mobile phone bracket, the telephone must be: Rinserted into the bracket or Rswitched to hands-free mode via Blue-
tooth®
See the mobile phone operating instructions for further information.
Using the phone book Introduction The phone book displays the names and phone numbers of all address book entries saved in the COMAND address book. If an address book entry does not have a tele- phone number, it does not appear in the phone book. In addition, MB Contact is listed as the first entry. This allows you to place a call to the Mercedes-Benz Service hotline (Y page 414). The phone book of the mobile phone is auto- matically downloaded to COMAND Online after connection. In the telephone book, you can: Rsave phone numbers (Y page 398) Rsearch for entries (Y page 396) Rdelete entries (Y page 397) Rimport contacts (Y page 411) Rdelete contacts (Y page 412) Rreceive vCards (Y page 412) i The stored phone book and the vCards
remain in COMAND Online even if you use COMAND Online with another mobile phone. The entries can be viewed without a mobile phone. For this reason, you should delete any phone book entries before hand- ing over or selling the vehicle.
Calling up the phone book Opening the phone book X Press the % function button. X Select Name in the telephone basic menu by turning cVd the COMAND controller and press W to confirm. If the phone book contains entries, they will be displayed in alphabetical order. The character bar at the bottom of the display is active. The character bar is used for fast selection of an entry.
396 Telephone
Enter the character using the character bar (Y page 298).
Symbol overview Sym- bol Æ Address book entry that has been
Explanation
entered or changed via COMAND Online Imported contact that has been saved in the phone or address book \ Address book entry with voice tag
i You can also call up the phone book using the multifunction steering wheel; see the separate vehicle Owner's Manual.
Closing the phone book X Select the & symbol in the character bar
by sliding ÆV and turning cVd the COMAND controller and press W to con- firm.
or X Press the % back button.
Using the multifunction steering wheel X Use the = or ; button to select the Tel menu. X Use the 9, : or 9 button to call up
the phone book.
These entries have also been assigned a voice tag. Voice tags are available in vehicles with LINGUA- TRONIC (see the separate operat- ing instructions).
à Contact imported from a mobile
phone that supports PBAP or imported from a convenience phone
¯ Entry which has been imported
from the SD memory card or USB device
® Entry imported via the Bluetooth®
interface
Searching for a phone book entry Searching with the character bar You determine the first letter of the entry you are looking for with the first character you enter. X Select a character by turning cVd the
COMAND Controller and press W to con- firm. The first entry in the list that starts with the letter selected is highlighted. If there are similar entries, the next different character is shown. For example, with entries such as Christel and Christine, the beginnings of the names are similar. In this case, you will be offered a choice between E and I.
Telephone 397
X Select the characters of the entry you are searching for one by one and press W to confirm. When the selection is clear, COMAND Online switches automatically to the selection list.
X To complete the search: slide VZ the COMAND controller repeatedly or press and hold W until the character bar disap- pears. The selection list appears.
Information about character entry (Y page 298) Searching with the number keypad You determine the first letter of the entry you are looking for with the first character you enter. X Press the appropriate number keys as
many times as necessary and one after the other.
Further information on character entry using the number keypad (direct entry) (Y page 300). Directly from the list You can switch to the list at any time during character entry. X Slide VZ the COMAND controller repeat- edly or press and hold W until the charac- ter bar disappears.
or X Select ¬ and press W to confirm. X To select an entry: turn cVd the
COMAND controller until the desired entry is highlighted and press W to confirm.
To select a phone number: the G symbol indicates that an entry contains more than one phone number. X Select a phone book entry with the G sym-
bol and press W to confirm. The sub-entries appear. The G symbol changes to I.
Phone book entry with several entries X Select a sub-entry by turning cVd and
press W to confirm.
X To return to the phone book using the character bar: select & in the list and press W to confirm.
or X Press the % back button.
Using the multifunction steering wheel X Dialling a number from the phone book, see
the separate vehicle Owner's Manual.
Displaying the details of an entry X Select an entry in the selection list by turn-
ing cVd the COMAND controller.
X Select the list symbol to the right of the
entry by sliding VY the COMAND control- ler and press W to confirm. X Select Details and press W to confirm. The detailed display appears.
X To close the detailed display: slide
XVY repeatedly until the entry is highligh- ted again.
or X Press the % back button.
Deleting an entry from the phone book If the entry contains only phone numbers, it is deleted from the phone book and address book.
398 Telephone
If it contains additional data, such as a navi- gable destination, the entry is deleted in the phone book. However, the entry is retained in the address book. X Select an entry in the selection list by turn-
ing cVd the COMAND controller.
X Select the list symbol to the right of the
entry by sliding VY the COMAND control- ler and press W to confirm. X Select Delete and press W to confirm. A prompt appears asking whether the entry should be deleted. X Select Yes or No and press W to confirm. If you select Yes, the entry is deleted in accordance with the rules described above. If you select No, the process will be cancel- led.
Creating a new entry in the phone book
X Slide ZV the COMAND controller repeat- edly in the phone book until the selection list appears.
X Select the list symbol on the right in the selection list by sliding VY the COMAND controller and press W to confirm. X Select New entry and press W to confirm. X Select a category for the number, e.g. Home, and press W to confirm. X Select a category for the phone, e.g. Mobile, and press W to confirm. X Select Continue and press W to confirm. The input menu with data fields appears.
: Selected data field with cursor ; Character bar X Enter characters (Y page 298) X To save an entry: turn cVd the COMAND Controller to select the ¬ symbol from the character bar and press W to confirm. The entry is created in the phone book and in the address book.
Adding to a phone book entry You can add telephone numbers to an exist- ing phone book entry. X Select an entry in the selection list by turn-
ing cVd the COMAND controller.
X Select the list symbol to the right of the
entry by sliding VY the COMAND control- ler and press W to confirm. X Select Add telephone no. and press W to confirm. X Select a category for the number, e.g. Home, and press W to confirm. X Select a category for the phone, e.g. Mobile, and press W to confirm. X Select Continue and press W to confirm. COMAND Online stores the data if there are fewer than five numbers assigned to the entry you are searching for in the selected number category. If five numbers are stored for the entry in the selected number category, a prompt will appear. You can then choose whether to overwrite one of the existing numbers.
Telephone 399
X Select Yes or No and press W to confirm. If you select Yes, a selection list will appear containing the five existing numbers. If you select No, the process will be aborted. X Select the number to be overwritten by
turning cVd the COMAND controller and press W to confirm. An input menu appears. The data field for entering the new phone number is high- lighted.
X Enter characters (Y page 298) X Store an entry (Y page 299)
Using call lists Introduction While the telephone is being used, COMAND Online stores individual lists for both incoming and outgoing calls (including missed calls). Call lists are not available unless a mobile phone is connected to COMAND Online. COMAND Online supports the PBAP Blue- tooth® profile. For this reason, note that the system behaviour differs, especially when tel- ephoning via the Bluetooth® interface: RConvenience phone or Bluetooth® tele-
phone with PBAP Bluetooth® profile: The call lists are downloaded automatically from the mobile phone by COMAND Online as soon as the mobile phone is connected to COMAND Online. COMAND Online displays entries without time information if these have been down- loaded in convenience telephony mode.
RBluetooth® telephone without PBAP Blue-
tooth® profile: The call lists are created and displayed by COMAND Online.
i For Bluetooth® telephones without the PBAP Bluetooth® profile, the call lists in COMAND Online are not synchronised with those on your mobile phone. These calls
may or may not be listed on your mobile phone, depending on the model. i If no mobile phone is connected, then the Call lists menu item is greyed out and cannot be selected. If you connect a mobile phone other than the previous one to COMAND Online, the previously available call lists and their entries will be deleted automatically. These are still available on the mobile phone itself.
i You will only be able to select the respec-
tive menu items once calls have been received or dialled from COMAND Online. Displaying missed calls in the COMAND display is not supported by all mobile phones.
Opening the call list and selecting an entry X Press the % function button. X Select Call lists in the telephone basic menu by sliding VÆ and turning cVd the COMAND controller and press W to con- firm. A menu appears.
Example: list of selected phone numbers : To close the list ; Date/time (if available), symbols (if
assigned) and telephone number of the entry highlighted = To call up options
400 Telephone
X Select Incoming calls or Calls dial‐ led by turning cVd and press W to con- firm. The corresponding list appears.
i You can also call up the list of dialled calls by pressing the 6 button when the tele- phone basic menu is shown. In this case, the list will only show phone numbers.
X Select an entry by turning cVd the
COMAND controller.
X To dial a phone number: press W. X To close the list: select the & symbol
and press W to confirm.
or X Press the % back button.
Displaying details from a list entry COMAND Online can also show a shortened list entry in full. X Select a list entry by turning cVd the
COMAND controller.
X Select the list symbol to the right of the
entry by sliding VY the COMAND control- ler and press W to confirm. X Select Details and press W to confirm. The detailed display appears.
X To go back to the list: slide XVY repeat-
edly until the list is highlighted.
Storing a phone number New address book entry For incoming calls from a person who is not in the address book, COMAND Online dis- plays the phone number in the call list. You can save this entry. X Open a call list and select an entry
(Y page 399).
X Select the list symbol to the right of the
entry by sliding VY the COMAND control- ler and press W to confirm.
X Select Save and press W to confirm. X Select New entry and press W to confirm. X Select a category for the number, e.g. Home, and press W to confirm. X Select a category for the phone, e.g. Mobile, and press W to confirm. Number category
Display (phone book and address book) No symbol
Not classified Home Work
¸
·
¬
Phone category
Display (phone book and address book) Not classified ; Landline Mobile Car X Select Save and press W to confirm. An input menu with data fields is shown. The data field for the telephone number is filled in automatically.
Ï
´
: Data field with cursor ; Telephone number and symbol for the
phone category are automatically entered
= Character bar
Adding information to an address book entry For incoming calls from a person who is not in the address book, COMAND Online dis- plays the phone number in the call list. You can save this entry. X Open a call list and select an entry
(Y page 399).
X Select the list symbol to the right of the
entry by sliding VY the COMAND control- ler and press W to confirm. X Select Save and press W to confirm. i Save is shown in grey if the selected list entry has already been saved. X Select Add telephone no. and press W to confirm. X Select a category for the number, e.g. Home, and press W to confirm. X Select a category for the phone, e.g. Mobile, and press W to confirm. X Select Save. The search menu for address book entries appears.
X Search for the desired entry (Y page 396). X Press W when you have finished searching. COMAND Online stores the data if there are fewer than five numbers assigned to the entry you are searching for in the selected number category. You will see a message to this effect. If five numbers are stored for the entry you are searching for, a prompt will appear ask- ing whether you wish to overwrite one of the existing numbers. X Select Yes or No and press W to confirm. If you select Yes, a selection list with the five existing numbers is displayed. If you select No, the process will be aborted. X Select the number to be overwritten in the list by turning cVd the COMAND controller and press W to confirm. COMAND Online overwrites the selected number with the new data.
Telephone 401
Deleting call lists If you are using a Bluetooth® phone that does not support the PBAP Bluetooth® profile, the call lists are generated and managed by COMAND Online. You can delete these call lists in COMAND Online. You cannot delete call lists from COMAND Online: Rif the connected Bluetooth® phone sup-
ports the PBAP Bluetooth® profile Rin convenience telephony mode X Select Call lists in the telephone basic menu by turning cVd the COMAND con- troller and press W to confirm. X Select Delete call lists and press W to confirm. A prompt appears asking whether you wish to delete all call lists. X Select Yes or No and press W to confirm. If you select Yes, the call lists are deleted. If you select No, the process will be aborted. i If you delete these call lists from the mobile phone (see the separate mobile phone operating instructions), COMAND Online updates the call list dis- play the next time it connects.
Using the speed dial list Storing an entry You can assign ten speed dial presets (0 – 9) in the speed dial list. There are two options available for this purpose. Option 1: X Search for a phone book entry in the phone
book (Y page 396).
X If an entry has several phone numbers,
select the desired number by turning cVd the COMAND controller.
402 Telephone
X Select the list symbol to the right of the
entry by sliding VY the COMAND control- ler and press W to confirm. A menu appears. X Select Speed dial by turning cVd the COMAND controller and press W to con- firm. A menu appears.
(Y page 386)
Rconvenience telephony (Y page 388) Rtelephony via the Bluetooth® interface X Select Call lists by sliding VÆ and turn- ing cVd the COMAND controller and press W to confirm. X Select Speed dial preset list and press W to confirm. The speed dial list appears.
X Select the list symbol to the right of the
entry by sliding VY the COMAND control- ler and press W to confirm. X Select Assign speed dial preset and press W to confirm. The speed dial list appears. The selected phone book entry appears at the top. The next free speed dial preset is highlighted.
Speed dial menu X Select Assign speed dial preset and press W to confirm. The speed dial list appears. The selected phone book entry appears at the top. The next free speed dial preset is highlighted.
X Select the speed dial preset by turning cVd the COMAND controller and press W to confirm. The phone book entry is saved in the speed dial preset.
Using speed dial presets to make a call The speed dial list contains stored phone book entries (Y page 401). Option 1: X Press one of the number keys for longer
than two seconds. The telephone basic menu displays the selected entry. This initiates dialling.
X Select the speed dial preset by turning cVd the COMAND controller and press W to confirm. The phone book entry is saved in the speed dial preset.
Option 2
X Call up the telephone basic menu:Telephone 403
Option 2: X Call up the telephone basic menu:
(Y page 386)
Rconvenience telephony (Y page 388) Rtelephony via the Bluetooth® interface X Select Call lists by sliding VÆ and turn- ing cVd the COMAND controller and press W to confirm. The speed dial list appears. X Select Speed dial preset list by turn- ing cVd the COMAND controller and press W to confirm. The speed dial list appears.
X Select preset and press W to confirm. The telephone basic menu displays the selected entry. This initiates dialling.
Deleting a speed dial preset X To delete a speed dial number: select Delete speed dial preset in the Speed dial menu by turning cVd the COMAND controller and press W to confirm. The speed dial preset is deleted. X To delete all speed dial numbers: select Delete all speed dial presets in the Speed dial menu by turning cVd the COMAND controller and press W to con- firm. You will be asked if you would like to con- tinue. X Select Yes or No and press W to confirm. If you select Yes, all speed dial presets will be deleted from the speed dial list. If you select No, the process will be cancel- led.
Text messages (SMS) Information and requirements The following conditions must be met in order to use the functions:
Type of tel- ephony Telephony via the Blue- tooth® inter- face
Convenience telephony
Conditions
RThe Bluetooth® mobile
phone supports the MAP Bluetooth® profile (Message Access Profile).
RThe mobile phone
bracket supports the SMS function.
RThe mobile phone is
connected to the mobile phone bracket and COMAND Online.
RThe PIN has been
entered.
RThe mobile phone is log- ged into a mobile phone network.
When the mobile phone is connected, the 30
most recent text messages that are currently stored on the phone are loaded to the COMAND Online text message inbox and dis- played. If the above conditions are met, new incoming text messages appear in the COMAND Online text message inbox. In addition, a tone sounds and the / symbol appears. The symbol is no longer displayed once you have read the text message. The ú mail symbol is displayed if the text message memory is full. The symbol is no longer displayed once you delete at least one text message. i For telephony via a data-enabled MB SAPmodule, see the data-enabled MB SAP module's separate operating instructions. i COMAND Online may not load all of the
most recent text messages: This may occur in exceptional cases, for example when using certain mobile phones/brackets and if the mobile phone inbox holds a large number of text mes- sages.
404 Telephone
i For more information about suitable
mobile phones and mobile phone brackets, contact your Mercedes-Benz Service Centre or visit http:// www.mercedes- benz.com/connect.
Displaying the text message (SMS) inbox Call up the inbox
Text message read-aloud function Settings for the read-aloud function: RLanguage (Y page 306) RSpeed (Y page 305) X Press W while a text message is being dis- played, select Read aloud and press W to confirm. COMAND Online reads out the text mes- sage.
Text message (SMS) inbox X Press the % function button. X Select SMS in the telephone basic menu by turning cVd the COMAND controller and press W to confirm. The text message inbox appears.
Reading a text message (SMS) X Calling up the text message inbox
(Y page 404)
X Select a text message in the text message inbox by turning cVd the COMAND con- troller and press W to confirm. The text message appears.
X To scroll through the display or select phone numbers in a text message: turn cVd the COMAND controller. The display scrolls up or down line by line, or skips to the next or previous telephone number and automatically highlights it.
X To return to the list: select the & sym-
bol and press W to confirm or press the % back button.
X To cancel the read-aloud function: press
the 8 button. or X Press W, select Cancel read-aloud function and press W to confirm. Sender or text display You can switch between displaying the text message sender or the text message content. The sender display shows the sender of the text message. If the sender is stored in the COMAND phone book, the name is displayed. The text display shows the first few words of a text message. X Select a text message in the text message inbox by turning cVd the COMAND con- troller.
X To switch to the text display: select the list symbol to the right of the text message by sliding VY the COMAND controller and press W to confirm. X Select Display text and press W to con- firm. The view changes.
X To switch to the sender display: select the list symbol to the right of the text mes- sage by sliding VY the COMAND controller and press W to confirm. X Select Display sender and press W to confirm. The view changes.
X To return to the telephone basic menu:
press the % button.
Displaying details and phone numbers COMAND Online can also show a shortened sender display in full. X Select a text message in the text message inbox by turning cVd the COMAND con- troller.
X Select the list symbol to the right of the text message by sliding VY the COMAND con- troller and press W to confirm. X Select Details and press W to confirm. The detailed display appears.
X To close the detailed view: slide XVY the
COMAND controller.
X To return to the telephone basic menu:
press the % button.
Managing text messages Calling a text message (SMS) sender X Press W the COMAND controller while the text message is being displayed. X Select Call sender and press W to con- firm. The telephone makes the call to the sender.
Using phone numbers in the text
: Usable numerical sequence Numbers in text messages that are highligh- ted in red can be used. X Select a usable number when the text mes-
sage is displayed.
Telephone 405
X Press W the COMAND controller and select Use. X Select Call. The telephone makes the call.
i It is possible that a highlighted numerical
sequence may not contain a telephone number.
i You can use the "New entry" or "Add no." functions to save this telephone number or to add it to an existing entry.
Storing the sender of a text message in the address book This function is not available if the sender’s telephone number is already stored in the address book. X Press W the COMAND controller while the text message is being displayed. X Select Save number and press W to con- firm. X Select New entry and press W to confirm. X Store the phone number (Y page 400) Adding the sender of a text message to an address book entry X Press W the COMAND controller while the text message is being displayed. X Select Save number and press W to con- firm. X Select Add telephone no. and press W to confirm.
X Proceed from the step "Selecting a number
category" (Y page 398).
Deleting a text message (SMS) X Select a text message in the text message inbox by turning cVd the COMAND con- troller.
X Select the list symbol to the right of the text message by sliding VY the COMAND con- troller and press W to confirm.
406 Telephone
X Select Delete and press W to confirm. A deletion prompt appears. X Select Yes or No and press W to confirm. If you select Yes, the text message is deleted. If you select No, the process will be cancel- led. i This delete function is not supported by all mobile phones. The Delete failed message appears.
Using the address book Introduction The address book organises and stores entries that are entered from different sour- ces (mobile phone, memory card, USB device, COMAND telephone book, navigation sys- tem). You can use these entries to make telephone calls and to navigate. i Number of contacts in the address
book: the address book can store a total of 4,000 contacts. 1,500 entries each are reserved in the address book for: Rcontacts from the mobile phone Rcontacts that you create in COMAND or
import from other sources.
As soon as you connect a new mobile phone to COMAND, all the contacts from the previous mobile phone are replaced by those from the new phone's address book. Address book entries remain stored if the mobile phone is disconnected. For this rea- son, delete your personal data using the reset function before selling your vehicle, for example (Y page 308).
Calling up the address book Using the function button: X Press the % function button.
You see either the telephone basic menu or the address book, depending on which was last active.
X If the telephone basic menu is displayed,
press the % function button again.
Using the telephone basic menu: X With the telephone basic menu shown, select Tel by sliding VZ the COMAND con- troller and press W to confirm. X Select Address book from the menu and press W to confirm.
The remaining 1,000 entries are assigned by COMAND as necessary.
i Display of mobile phone contacts: con- tacts downloaded from the mobile phone remain in the address book even if you dis- connect the mobile phone from COMAND Online. Contacts that have pre- viously been available can be displayed as soon as the mobile phone is reconnected. COMAND Online downloads the contacts again so that any new contacts that have been added to the mobile phone can be displayed.
Address book with ¥ address book entry and L navigable data X To browse in the address book: turn
cVd the COMAND controller.
X To close the address book: press the
% button.
i An address book entry can contain the
following information: Rsurname Rfirst name Rcompany Rtwo addresses Rgeo-coordinates Rup to five telephone numbers
Searching for an address book entry
Search menu with character bar : ¥ Address book entry ; L Complete address data from the nav-
igation system = Character bar ? d Phone book entry on the mobile phone A Entry with voice tag For more symbols, see the symbol overview (Y page 396). X Search for an entry (Y page 396)
Creating a new entry in the address book You can enter address data directly into the address book. If you store telephone num- bers in the COMAND phone book, these are also saved in the address book. If you store a navigation destination, COMAND creates an address book entry that includes the com- plete navigable address data. X Call up the address book (Y page 406)
Telephone 407
X Select New in the address book by sliding VÆ and turning cVd the COMAND con- troller and press W to confirm. An input menu with data fields appears.
Input menu with data fields : Selected data field with cursor ; Character bar X Enter characters (Y page 298) X Store an entry (Y page 299)
Deleting an address book entry X Option 1: select Delete in the address book by sliding VÆ and turning cVd the COMAND controller and press W to con- firm.
X Option 2: search for an address book entry
(Y page 396).
X Select the list symbol to the right of the
entry by sliding VY the COMAND control- ler and press W to confirm. X Select Delete and press W to confirm. Irrespective of the option chosen, a prompt will appear. X Select Yes or No and press W to confirm. If you select Yes, the entry will be deleted. If you select No, the process will be cancel- led.
408 Telephone
Displaying details for an address book entry Selecting an entry
Showing the details of an address book entry X Select the list symbol to the right of the
entry by sliding VY the COMAND control- ler and press W to confirm. X Select Details and press W to confirm. The display is shown in full.
X To close the detailed display: press the
% back button.
Changing an address book entry X Option 1: search for an address book entry
(Y page 396).
X Select an entry in the selection list by turn-
ing cVd the COMAND controller.
X Select the list symbol to the right of the
entry by sliding VY the COMAND control- ler and press W to confirm. A menu appears.
Detailed display of address book : To go back to the previous menu ; \ Business details = List symbol (calls up options) X Search for an address book entry
(Y page 396)
X Select an entry in the selection list by turn-
ing cVd the COMAND controller.
or X Call up the address book (Y page 406) X Select an entry by turning cVd the
COMAND controller.
X Press W the COMAND controller.
The detailed display appears.
Starting route guidance to an address X Select the address data field by turning cVd the COMAND controller and press W to confirm. The route to the destination address is cal- culated and route guidance starts (Y page 321).
Calling a telephone number X Select the phone number data field by turn- ing cVd the COMAND controller and press W to confirm. This initiates dialling and you can then make your call (Y page 392).
X Select Edit and press W to confirm. X Option 2: call up the detailed view for an
address book entry (Y page 408).
X Select the list symbol to the right of the
entry by sliding VY the COMAND control- ler and press W to confirm. X Select Edit and press W to confirm. In both cases, the input menu containing data fields appears.
Information about character entry (Y page 298)
Changing the category of a telephone number data field X Display details for an address book entry
(Y page 408).
X Select the telephone number data field. X Select the list symbol to the right of the
entry by sliding VY the COMAND control- ler and press W to confirm. X Select Change category and press W to confirm. X Select a number category, e.g. Home. X Select a telephone category, e.g. Mobile. X If desired, select Preferred and press W to confirm. Depending on the previous status, switch the option on O or off ª. The phone num- ber is displayed as the first number in the phone book and can be dialled immedi- ately. X Select Save and press W to confirm. The new category is stored.
Calling a number stored in an entry Conditions The mobile phone must either: Rbe inserted in the mobile phone bracket
(Y page 386)
Ror be connected via the Bluetooth® inter-
face (Y page 381) Dialling a number X Display details for an address book entry
(Y page 408).
X Select the phone number data field by turn-
ing cVd the COMAND controller.
X Press W the COMAND controller to con-
firm.
or X Select the list symbol to the right of the
data field by sliding VY the COMAND con- troller.
Telephone 409
X Press W the COMAND controller to con- firm. X Select Call and press W to confirm. The telephone makes the call. The display switches to telephone mode.
Storing the phone number as a speed dial number X Display details for an address book entry
(Y page 408).
X Select the phone number data field by turn-
ing cVd the COMAND controller.
X Select the list symbol to the right of the
data field by sliding VY the COMAND con- troller and press W to confirm. X Select Speed dial and press W to con- firm. You can now store the number in one of the ten speed dial presets (Y page 401).
Starting route guidance to an entry Address book entry with navigable data This function is available as soon as you have stored a destination in the destination mem- ory (Y page 360). X Search for an address book entry with the
L symbol and select it from the list (Y page 407).
X Display details for an address book entry
(Y page 408).
X Select the address data field by turning cVd the COMAND controller and press W to confirm. Route guidance begins.
or X Select the list symbol to the right of the
entry by sliding VY the COMAND control- ler and press W to confirm. X Select Navigate and press W to confirm. Route guidance begins.
410 Telephone
Address book entry without navigable data Route guidance can also be started for an address book entry without the L symbol. If the address data or designations do not match the digital map, COMAND Online prompts you to re-enter the address. X Enter the destination address
(Y page 317).
X Start route guidance
The navigable address is automatically added to the address book entry.
i This will provide you with an address book entry that is suitable for navigation. If you have changed the address data in the address entry menu, navigation uses the modified address data rather than the postal address when it is next started. When starting navigation you should there- fore always check the address book to ensure that the destination address corre- sponds to your desired destination.
Voice tags Introduction You can enter voice tags via LINGUATRONIC (see the separate operating instructions). Once you have assigned a voice tag to an address book entry, you can vocally call up this entry and dial a phone number, for exam- ple. You can add one voice tag per address book entry. Adding or changing a voice tag X Search for an address book entry with or
without a voice tag (¦) (Y page 407). X Select the list symbol to the right of the
entry by sliding VY the COMAND control- ler and press W to confirm.
X Select Voice tag and press W to confirm. X Select Add or Change and press W to con- firm. Subsequent operation is voice-controlled. LINGUATRONIC guides you through the dialogues.
Deleting a voice tag X Search for an address book entry with a
voice tag (Y page 407).
X Select the list symbol to the right of the
entry by sliding VY the COMAND control- ler and press W to confirm. X Select Voice tag and press W to confirm. X Select Delete and press W to confirm. A deletion prompt appears. X Select Yes or No and press the 9 button to confirm. If you select Yes, COMAND Online deletes the voice tag. If you select No, the process will be cancel- led.
Listening to a voice tag X Search for an address book entry with a
voice tag (Y page 407).
X Select the list symbol to the right of the
entry by sliding VY the COMAND control- ler and press W to confirm. X Select Voice tag and press W to confirm. X Select Listen and press W to confirm. You hear the voice tag.
Importing phone book entries This function allows you to store phone book entries from the mobile phone in the address book. Possible sources are: Rthe mobile phone Rthe memory card Rthe USB device Rthe Bluetooth® interface
Imported phone book entries are indicated in the phone book by different symbols (Y page 396). X Search for an entry in the phone book on
the mobile phone d(Y page 396).
X Select the list symbol to the right of the
entry by sliding VY the COMAND control- ler and press W to confirm. X Select Save entry and press W to con- firm. The Data saved message appears. The phone book entry is now saved as an address book entry. The d symbol is replaced by the ¥ sym- bol.
Importing contacts Information and requirements You can import contacts (vCards) from the memory card and from a USB device into the address book, or receive vCards via Blue- tooth®. i Up to 2,500 entries can be imported into the address book. A message notifies you if the maximum number is reached. You then have to delete existing entries in order to import new entries (Y page 407).
Depending on the source of the contact data, different requirements apply: Source Conditions memory card The SD memory card is inserted (Y page 463). It contains importable con- tact details. The USB device is inserted into the USB port (Y page 463). It contains importable contact details.
USB device
Requirements for receiving vCards via Bluetooth®
Telephone 411
You can receive vCards from devices (e.g. from a PC) that support the sending of vCards via Bluetooth®. It is not necessary to authorise the device in COMAND to do so. Please bear the following in mind: RBluetooth® must be activated in COMAND and on the Bluetooth® device; see the oper- ating instructions for the device.
Rthe Bluetooth® device must be able to send vCards via Bluetooth® (see the operating instructions for the device).
Rthe Bluetooth® device in the vehicle must
be switched on.
Importing from the memory card or USB device Entries imported from the memory card or from a USB device have the ¯ symbol. The following conditions must be fulfilled in order to import vCards: RvCards (vcf files) may be located in the main directory or in folders. COMAND allows you to select the relevant folders directly.
RvCards must have the ".vcf" file extension. i One vcf file may contain several vCards. COMAND supports vCards in versions 2.1
and 3.0. X Select Address book in the address book or, if the telephone basic menu is shown, select Telephone by sliding VÆ and turn- ing cVd the COMAND controller and press W to confirm. X Select Import contacts and press W to confirm. A menu appears. X Select From the memory card or From USB device in the menu by turning cVd the COMAND controller and press W to confirm.412 Telephone
X Select Add or Overwrite and press W to confirm. Add imports the entries from the memory card or USB device into the address book. Overwrite imports the entries from the memory card or USB device and overwrites all entries in the address book with the ¯ symbol. The previous entries are then no longer available. After the contact data has been imported successfully, you will see a message to this effect. The address book or the respective telephone basic menu is displayed. i You can select Overwrite if the address book already contains corresponding entries. A message notifies you if the address book is full.
Receiving vCards via Bluetooth®
X Select Address book in the address book or, if the telephone basic menu is shown, select Telephone by sliding VÆ and turn- ing cVd the COMAND controller and press W to confirm. A menu appears. X Select Import contacts and press W to confirm. X Select Receive business cards in the menu by turning cVd the COMAND con- troller and press W to confirm. This interrupts the Bluetooth® connection between COMAND and your active mobile phone. COMAND is, however, ready to receive vCards from another Bluetooth® device (PC, mobile phone).
X Start the data transfer on the external Blue- tooth® device (see the operating instruc- tions for the device). The number of vCards received is dis- played.
X To end reception: press W or the %
back button. COMAND Online then reconnects to the mobile phone.
Received vCards are identified by the ® symbol in the address book. i If you switch to another main function,
e.g. navigation, while receiving vCards, the reception of vCards will be terminated. Deleting contacts X Select Address book in the address book or, if the telephone basic menu is shown, select Telephone by sliding VÆ and turn- ing cVd the COMAND controller and press W to confirm. A menu appears. X Select Delete contacts and press W to confirm. X Select one of the following options: RInternal contacts RContacts from storage device RReceived business cards RDelete all A prompt corresponding to your selection appears. X Select Yes or No and press W to confirm. If you select Yes, the contacts are deleted according to your selection. If you select No, the process will be cancel- led.
Telephone 413
Switching import contacts on/off
You can determine whether contacts are automatically imported to COMAND Online when you connect a mobile phone, or whether importing is suppressed. Connecting a mobile phone (Y page 381) X Select Tel in the telephone basic menu by sliding VÆ and turning cVd the COMAND controller and press W to confirm. A menu appears. X Select Import contacts from
and press W to confirm. Either you allow the automatic upload O or you suppress the function ª. If you do not want to store sensitive contacts in the address book, proceed as follows: X Connect the mobile phone to COMAND
Online. The contacts are automatically imported to the address book.
X Delete the sensitive contacts from the address book. X Switch the Import contacts from
function off ª. When you reconnect your mobile phone to COMAND Online, no contacts will be impor- ted, including any that have been added. Activating/deactivating the display of contact details (privacy) The Hide data setting allows you to deter- mine whether or not phone and address book data is shown on the screen. This means that,
for instance, you can prevent a passenger from seeing a caller's name. Activating the function has the following effects: RPhone book and address book data from the mobile phone are hidden. This means that they cannot be used to make calls, send text messages or for navigation. You still have access to phone book and address book data stored in COMAND Online.
RWhen receiving a call, the name of the caller
will not be shown, even if there is an address book entry for the number of the incoming call.
RWhen making a call by entering the phone
number, the name of the person you are calling will not be shown, even if there is an address book entry for that number.
RThe call lists are hidden. RRedialling is not possible. RThe list of received text messages is hid- den. Incoming text messages are still indi- cated. This is only possible if a mobile phone which supports the MAP profile is connected. However, the phone number is not visible and cannot be accessed quickly, e.g. by a passenger.
Connecting a mobile phone (Y page 381) X Select Tel in the telephone basic menu by sliding VÆ and turning cVd the COMAND controller and press W to confirm. A menu appears.
414 Telephone
X To hide details: select Hide data:
and press W to confirm. You either allow ª or suppress O access to the address details. Mercedes-Benz Contact Introduction Mercedes-Benz Contact offers fast assis- tance at the touch of a button – around the clock. For any queries about the vehicle, Mercedes-Benz Contact offers a fast and easy connecting call to the Mercedes-Benz Cus- tomer Centre. You can request an appoint- ment, or call for help in the event of a break- down. All important vehicle data is sent via mobile phone to ensure that you receive optimum support. Therefore, the mobile phone has to be directly connected to COMAND Online via the Bluetooth® interface or convenience tel- ephony. The following data is transmitted: Rthe vehicle identification number Rthe total distance recorder reading Rthe vehicle position Rthe telephone number Rthe service code (only when required for
maintenance)
i Please note that Mercedes-Benz Contact
is a Mercedes-Benz customer service. In emergencies, always call the national emergency services first, using the stand- ard national emergency service telephone numbers.
i Currently, this service is available for vehi- cles from the following European countries: RBelgium RGermany RFrance RUnited Kingdom RIreland
RItaly RLuxembourg RNetherlands RAustria RPoland RSwitzerland RSlovakia RSpain RCzech Republic RHungary
Calling the Mercedes-Benz Customer Centre G WARNING Pay attention to the traffic conditions. You may otherwise be distracted from the traffic conditions, cause an accident and injure your- self and others.
X Call up the COMAND phone book (Y page 395). The MB Contact entry is the first entry in the COMAND phone book. The entry is highlighted.
There are two ways to contact the Mercedes- Benz Customer Centre: X Press W the COMAND controller. or X Press the 6 button on COMAND Online. This initiates a call. A voice announcement will then request that you confirm the data transfer by pressing the specified number on the COMAND Online keypad. After con- firmation, COMAND Online sends the required vehicle data.
i Alternatively, you can initiate a call using the multifunction steering wheel (see the vehicle Owner’s Manual).
During data transmission, you will see a cor- responding symbol in the display. This may take a moment. Then, you can select the desired service and be connected to a spe- cialist from the Mercedes-Benz Service Centre.
Telephone 415
i Contact your Mercedes-Benz Service
Centre for further information on Mercedes-Benz Contact, the range of serv- ices offered and on using the function.
Demand-actuated service message To attain the optimal level of support in main- taining your vehicle, you can arrange a service appointment directly with the Mercedes-Benz Customer Centre. As well as a warning in the instrument cluster, a window appears in the COMAND Display. There, a message actively indicates that a service is required; this mes- sage enables you to contact the Mercedes- Benz Customer Centre directly. You will see the Service
is due soon: Would you like to make a workshop appointment? message. X To arrange a service appointment: select Call now by turning COMAND Con- troller cVd and confirm with W. After your confirmation, the vehicle data is sent via Mercedes-Benz Contact, and a Customer Centre employee personally deals with your appointment. The informa- tion is then sent to your desired service outlet. They will then contact with you within 24
hours to confirm the following details: Rscope of service Rlength of stay Rprice X To arrange a service appointment later: select Call later and confirm with W. The window is hidden, then reappears after a certain amount of time. X To not arrange a service appointment: select No and confirm with W. The window is hidden and does not show this maintenance requirement again.Mercedes-Benz emergency call sys- tem Overview
