Login- Download PDF Manual
-
General information
Before using your Bluetooth® audio device with COMAND for the first time, you will need to authorize it.
When you authorize a new Bluetooth® audio device, it is connected automatically. Connection involves first searching for a
Bluetooth® audio device and then authorizing it.
You can authorize up to fifteen Bluetooth® devices.
i If you authorize a mobile phone that
supports Bluetooth® audio, the A2DP and AVRCP Bluetooth® audio profiles are connected automatically. The mobile phone is then entered in both the Bluetooth® telephone list (Y page 116) and in the Bluetooth® device list (Y page 173).
Mercedes-Benz recommends authorizing a mobile phone in Bluetooth® telephony (Y page 116).
Searching for and authorizing a Bluetooth® audio device
X Switch on Bluetooth® audio mode
(Y page 175). If you see the No Bluetooth Audio Device Authorized message, you will need to connect the Bluetooth® audio device first.
X Select BT Audio by sliding VÆ and turning
cVd the COMAND controller and press W to confirm.
X Confirm Bluetooth Audio Device List
by pressing W the COMAND controller.
X To search: confirm Update by pressing
W the COMAND controller. COMAND searches for Bluetooth® audio devices within range and adds them to the Bluetooth® device list. Bluetooth® audio devices are detected if they support the Bluetooth® audio profiles (A2DP, AVRCP).
The duration of the search depends on the number of Bluetooth® audio devices within range and their characteristics.
Bluetooth® audio mode 173
Example: Bluetooth® device list : Newly detected mobile phone with Bluetooth® audio function in range
; Bluetooth® audio player not within range but previously authorized (icon appears in gray)
The Bluetooth® device list displays all authorized devices, whether they are within range or not. After a device search, devices which are within range but not authorized are also displayed.
i With some Bluetooth® audio devices,
playback must be initially started on the device itself, so that COMAND can play the audio data.
X To authorize: select an unauthorized Bluetooth® audio device from the list (example: :) by turning cVd the COMAND controller.
X Select the symbol to the right of the
Bluetooth® audio device by sliding VY the COMAND controller and press W to confirm.
X Select Authorize and press W to confirm. Depending on the Bluetooth® audio device used, you now have two options for continuing with authorization.
X Option 1: enter the passkey. To do so,
proceed as described in the "Authorizing (registering) a mobile phone" section (Y page 117). After successful authorization, the Bluetooth® audio device is connected and starts playing.
174 Bluetooth® audio mode
X Option 2 (Secure Simple Pairing): if the digit codes displayed in COMAND and on the Bluetooth® audio device are the same, confirm Yes by pressing W. If you select Yes, authorization continues and the Bluetooth® audio device is connected. Playback starts.
If you select No, authorization will be canceled.
i The Bluetooth® audio device must
support the Bluetooth® version 2.1 for connection via Secure Simple Pairing. COMAND creates a six-digit code, which is displayed on the two devices that are to be connected.
X External authorization: COMAND may
not be able to locate your Bluetooth® audio device due to the specific security settings of the Bluetooth® audio device itself. In this case, check whether your Bluetooth® audio device can locate the COMAND system (Y page 118). The Bluetooth® device name of COMAND is MB Bluetooth. After successful authorization, the Bluetooth® audio device is connected and starts playing.
Reconnecting a Bluetooth® audio device
The Bluetooth® audio profiles are connected automatically under the following circumstances:
Rone of the last two mobile phones to have
been connected has also been used as a Bluetooth® audio player (if this function is supported by the mobile phone).
Rthe mobile phone takes over the automatic
connection itself.
A Bluetooth® audio player without telephone functions is not automatically reconnected, even if it was the last device connected.
If the No Bluetooth Audio Device Connected message appears, you have two
options to connect a Bluetooth® audio device:
Option 1
X Confirm Connect Last Device in the
basic display by pressing W the COMAND controller. If COMAND can locate the Bluetooth® audio device, it will be connected and will start playing.
i With some Bluetooth® audio devices,
playback must be initially started on the device itself, so that COMAND can play the audio data.
Option 2
X Select BT Audio by turning cVd the COMAND controller and press W to confirm.
X Confirm Bluetooth Audio Device List
by pressing W the COMAND controller.
X Select aBl uetooth® audio device by turning
cVd the COMAND controller and press W to confirm. If COMAND can locate the Bluetooth® audio device, it will be connected and will start playing.
i With some Bluetooth® audio devices,
playback must be initially started on the device itself, so that COMAND can play the audio data.
Bluetooth® audio device and simultaneous search for mobile phones
During the search for mobile phones (Y page 116), the connection with the Bluetooth® audio device is terminated. In the Bluetooth® audio basic display (Y page 176), you will see the Received Business Cards message and the Received Business Cards menu item cannot be selected.
Bluetooth® audio mode 175
Displaying details
Switching to Bluetooth® audio mode
X Select aBl uetooth® audio device in the
Bluetooth® device list.
X Select the symbol to the right of the
Bluetooth® audio device by sliding VY the COMAND controller and press W to confirm.
X Select Details and press W to confirm. The following information concerning the selected mobile phone is shown:
RBluetooth® name
RBluetooth® address
Option 1
X Connect (Y page 172) or reconnect
(Y page 174) a Bluetooth® audio device. COMAND activates the Bluetooth® audio device. The basic display appears and the device starts playing.
Option 2
X Press theh function button one or more
times.
Ravailability status (shown after an
i By pressing the function button
update)
Rauthorization status
repeatedly, you can change the operating mode in the following order:
X To close the detailed view: turn cVd or
Raudio CD/DVD/MP3 (disc)
slide XVY the COMAND controller.
De-authorizing (de-registering) a Bluetooth® audio device
Rmemory card mode
RMUSIC REGISTER
RUSB storage device
RMedia Interface or audio AUX mode
X Select a Bluetooth® audio device in the
RBluetooth® audio mode
Bluetooth® device list.
X Select the symbol to the right of the
Option 3
X Select Bluetooth Audio (Y page 159) in the media list by turning cVd the COMAND controller and press W to confirm. COMAND activates the connected device. You will see a message to this effect. The basic display then appears.
Bluetooth® audio device by sliding VY the COMAND controller and press W to confirm.
X Select De-Authorize and press W to
confirm. A prompt appears asking whether you really wish to de-authorize this device.
X Select Yes or No.
If you select Yes, the device will be deleted from the Bluetooth® device list.
If you select No, the process will be aborted.
i Before re-authorizing the Bluetooth®
audio device, you should also delete the device name MB Bluetooth from your Bluetooth® audio device's Bluetooth® list (see the Bluetooth® audio device's operating instructions).
Starting playback if the Bluetooth® audio device has been stopped
During the search for mobile phones (Y page 116), the connection with the Bluetooth® audio device is terminated. In the Bluetooth® audio basic display (Y page 176), you will see the No Bluetooth Audio Device Connected message and the Connect Last Device menu item cannot be selected.
When the search is finished, the Bluetooth® audio device can be reconnected.
X Confirm Connect Last Device by
pressing W. Depending on the Bluetooth® audio device used, playback starts immediately or you must start playback manually.
In this case, you will see the Bluetooth Audio Device Paused message.
176 Bluetooth® audio mode
Example: Bluetooth® audio basic display : Track name
; Current playback settings (no symbol for
"Normal track sequence")
= Album name
? Sound settings
A Media list
B Artist C To stop É or start Ì playback D To connect a Bluetooth® audio device or
increase the volume using COMAND E Bluetooth® audio data medium type F Data medium position in the media list
i If the Bluetooth® audio device connected supports metadata and corresponding data is available, then the artist, track and album name can be displayed.
Starting/stopping playback
X To start playback: select Ì by sliding
VÆ and turning cVd the COMAND controller and press W to confirm. Playback starts. Selection is at É.
X To stop playback: select É by turning
cVd the COMAND controller and press W to confirm. A message appears. Selection is at Ì.
X To continue playback: select Ì by
turning cVd the COMAND controller and press W to confirm. A message appears. Selection is at É.
X To start playback: select Ì by turning
cVd the COMAND controller and press W to confirm. Playback resumes from the beginning.
Selecting a track
This function is not supported by all Bluetooth® audio devices.
X To skip forwards or backwards to a
track: press the E or F button on COMAND.
or X Press the 9 or : button briefly on
the multifunction steering wheel.
X Rapid scroll: press and hold the 9
or : button on the multifunction steering wheel until the desired track is reached. If you hold down the 9 or : button, the system runs through the list more quickly.
Selecting playback options
If the Bluetooth® audio device supports the corresponding function, the following options are available:
RNormal Track Sequence
The tracks are played in the normal order (e.g. track 1, 2, 3, etc.).
Audio data playback is determined by the order in which the tracks are written to the data carrier. Alphabetical order is the most common. Once all the tracks in a folder have been played, the tracks in the next folder are played.
RRandom Tracks
All the tracks on the medium are played in random order (e.g. track 3, 8, 5 etc.).
Bluetooth® audio mode 177
X Select BT Audio by sliding VÆ and turning
cVd the COMAND controller and press W to confirm. The # dot indicates the option selected.
X Select the option by turning cVd the
COMAND controller and press W to confirm. If you select Random Tracks, you will see a corresponding symbol in the display/ selection window.
Adjusting the sound settings
The sound settings are described using radio mode as an example in the "Basic functions of COMAND" section (Y page 34).
Increasing the volume using COMAND
X Select BT Audio by sliding VÆ and turning
cVd the COMAND controller and press W to confirm.
X Select Volume and press W to confirm.
A menu appears. The # dot indicates the current setting.
X Select Standard or Boost and press W to
confirm.
You will find further information in the "Audio AUX mode" section (Y page 182).
178 Media Interface mode
Media Interface mode
Connection options
Overview
The connection sockets are located in the stowage compartment in the center console.
Device-specific adapter cables, included with the Media Interface, are required to connect external devices to the Media Interface.
i Store individual parts in a safe place.
Only use genuine Mercedes-Benz connection cables.
You can connect the following data media to COMAND via the Media Interface:
RiPod®
Rcertain MP3 players
i iPod® is a registered trademark of Apple
Inc., Cupertino, California, USA.
Supported devices
For details and a list of supported devices, visit http://www.mbusa-mobile.com. Alternatively, call the Mercedes-Benz Customer Assistance Center at 1-800-FOR-MERCedes (1-800-367-6372) (for USA) or Customer Relations at 1-800-387-0100 (for Canada).
Connecting an external device
i Do not leave external devices in the
vehicle, as their correct function cannot be guaranteed if they are subjected to extreme temperatures, e.g. from exposure to direct sunlight or very low outside temperatures (see the operating instructions of the respective device). Mercedes-Benz USA, LLC accepts no liability for damage to external devices.
: Four-pin socket for ⅛ inch stereo jack, e.g. for MP3 players (audio and video)
; iPod® plug for connecting an iPod® = USB socket for connecting an MP3 player ? Example of device: iPod®
X Connect the external device with suitable
socket :, ; or =. COMAND activates the device; a message appears.
If you remove a device, the No Device Connected message appears.
i A connected iPod® or MP3 player should
not be simultaneously operated via the Media Interface and the remote control (e.g. Bluetooth® remote control) or directly on the device itself as this may cause unforeseen technical difficulties.
i Connecting a fully discharged iPod® or
MP3 player can result in an extended initialization period.
Malfunction messages appear while the device is being activated if:
RCOMAND does not support the device
connected (External Device Unavailable message).
Rthe connected device consumes too much
power.
Rthe Media Interface connection is faulty.
Ra mass storage device (e.g. USB stick or
Never connect more than one device at a time. You will otherwise not be able to play back from the external device.
USB hard disk) is connected to the Media Interface (Please Connect The Device To The Other USB Port message).
i The separate USB connection ensures
Option 4
Media Interface mode 179
quick access and expanded media content options.
i Consult an authorized Mercedes-Benz
Center if you have further questions.
Switching to Media Interface mode
General information
In extreme cases, starting up individual functions can take up to several minutes – this depends on the external device and its content (e.g. video podcasts).
Only use the original software to save files on iPods or MP3 players. Otherwise, some or all functions may not be available.
Option 1
X Connect an external device (Y page 178). COMAND activates the device. The basic display then appears.
Option 2
X In the media list (Y page 159), select the
entry at position 0 by turning cVd the COMAND controller and press W to confirm. COMAND activates the connected device. You will see a message to this effect. The basic display then appears.
If no device is connected, you will see the Media Int. entry instead of a device name.
Media Interface mode (iPod® mode) when equipped with a DVD changer : Type of data medium
The external device is connected to the Media Interface. X Press theh function button one or more
; Track number
= Elapsed track time (also in format
00:00:00 for audio books)
times.
By pressing the function button repeatedly, you can change the operating mode in the following order:
Raudio CD/DVD/MP3 (disc)
Rmemory card mode
RMUSIC REGISTER
RUSB storage device
RMedia Interface or audio AUX mode
RBluetooth® audio mode
? Track name
A Graphic time display
B Graphic track display
C Sound settings
D Media list
E Album name (if available)
F Music search
G Position in the media list
H Artist (if available)
I Playback options
Option 3
X Press the i number button.
This selects the connected external audio device directly.
Type of device : connected is indicated by the corresponding symbol for iPod® or MP3
player.180 Media Interface mode
The current playback option (Y page 163) is shown with a symbol behind album name E (no display for Normal Track Sequence).
X Enter more numbers if desired.
The track plays after the last possible number is entered.
i If the device connected does not contain any playable tracks, a message appears to this effect.
i Pressing and holding a number key for
more than two seconds completes the entry, and the corresponding track is played.
Selecting music files
Fast forwarding/rewinding
Note
COMAND displays the data stored on the iPod® or MP3 player according to the filing structure used in the respective medium.
Selecting by skipping to a track
X To skip forwards or back to a track: turn
cVd the COMAND controller when the display/selection window is active.
or X Press the E or F button.
The skip forward function skips to the next track. The skip back function skips to the beginning of the current track if the track has been playing for more than eight seconds. If the track has been playing for less than eight seconds, it skips to the start of the previous track. If you have selected a playback option other than Normal Track Sequence, the track sequence is random.
Selecting using the number keypad
X To make an entry: press the l button.
An input menu appears. The number of characters available for input depends on the number of stored tracks.
X To enter a track number: press a number
key, e.g. q. The digit is entered in the first position in the input line.
i COMAND will ignore and not display an
invalid digit.
X While the display/selection window is
active, slide XVY and hold the COMAND controller until the desired position has been reached.
or X Press and hold the F or E button
until the desired position is reached.
i On an iPod®/iPhone®, fast rewind only
functions within the current track.
Selecting a category/playlist/folder
Overview
iPod® and certain MP3 players
For an iPod® or MP3 player, you can select tracks using categories or folders.
Depending on the device connected, the following categories may be available, for example:
RCurrent Tracklist
RPlaylists (e.g. All)
RArtists
RAlbums
RTracks
RPodcasts
RGenres
RComposers
RAudiobooks
i Some playback categories contain the
entry All. If this entry has been selected, the entire content of the category selected will be played.
Calling up a category list
X Select Search in the basic display by
sliding VÆ and turning cVd the COMAND controller and press W to confirm. The category list appears.
i The Search menu item is not available
until the device has been activated.
Example: category list
X Select Current Tracklist by turning cVd the COMAND controller and press W to confirm. The content of the current track list appears.
Example: current track list : Symbol for next folder up
; Device icon and device name
= Track symbol
? Current title
X Select the track by turning cVd the COMAND controller and press W to confirm. The track is played.
Media Interface mode 181
X To switch to the next folder up: slide
XV the COMAND controller or press the % button.
Playing back the content of a category
or folder
X Select the category or folder by turning
cVd the COMAND controller.
X Press W the COMAND controller for longer
than two seconds. The content of the category or folder selected is played in accordance with the playback option (Y page 163) selected.
Alphabetical track selection
iPod® and MP3 players
This function is available for alphabetically sorted categories and folders. This function is not available for albums or playlists, for example.
X Select a category, e.g. Artists, by turning
cVd the COMAND controller and press W to confirm. The available artists are displayed.
X Press the corresponding number key once or several times to select the first letter of the artist's name (e.g. for an artist beginning with the letter "C", press number key l three times). The available letters are listed at the lower edge of the display.
After a message, the first entry in the list which matches the letter entered is highlighted.
i If no corresponding entry exists, the last entry corresponding to a previous letter is highlighted instead.
i For iPods® and MP3 players, the quality of the search results is highly dependent on the version and language variant of the software (e.g. iTunes® version) used to populate the device.
182 Audio AUX mode
If different sorting rules are defined (e.g. in iTunes®), the search is canceled without any result.
i DRM (Digital Rights Management)
protected files are not supported by the Media Interface.
Playback options
Audio AUX mode
The following options are available:
Notes on audio AUX mode
RNormal Track Sequence
Normal track sequence: you hear the tracks in their normal order (e.g. numerical or alphabetical).
RRandom Medium
All the tracks on the medium are played in random order.
RRandom Track List
The tracks in the currently active category or folder, including any subfolders, are played in random order.
i For MP3 players, the random playlists
offer a maximum of 300 tracks chosen at random.
X To select a playback option: select
Media Interface in the basic display by sliding VÆ and turning cVd the COMAND controller and press W to confirm. The options list appears. The # dot indicates the option selected.
X Select an option and press W to confirm.
MP3 player instructions
Data formats
MP3 and WMA are supported as data formats with fixed and variable bit rates (up to 320 kbits/s).
You can connect an external audio source (AUX) to COMAND. The socket for this is located in the glove box.
If COMAND is equipped with a Media Interface, external audio sources are connected using the corresponding cable set. An AUX socket is not provided. The connections for the Media Interface are located in the stowage compartment in the center console.
i You will find further information online at http://www.mbusa-mobile.com. Or call the Mercedes-Benz Customer Assistance Center at 1-800-FOR-MERCedes (1-800-367-6372) (for the USA) or Customer Relations at 1-800-387-0100
(for Canada).Activating audio AUX mode
When you connect an external audio source, audio AUX is not selected automatically.
X Select Audio in the main function bar by
sliding ZV and turning cVd the COMAND controller and press W to confirm. If AUX mode was the last mode selected, it will now be active.
If another audio source is switched on, you can now switch to audio AUX mode in the audio menu.
X Select Audio using ZV and press W to
Special considerations when using MP3
players
confirm. The audio menu appears.
Up to eight directory levels with up to 1000
tracks per directory are supported.Do not use USB extension leads or adapters. They can impair functionality.
Audio AUX mode 183
X Select Aux using cVd and press W to
X Select Volume in the AUX display by turning
confirm. The audio AUX menu appears. The medium in the external audio source is played, if the source is connected and playback selected.
cVd the COMAND controller and press W to confirm. A menu appears. The # dot indicates the current setting.
Please see the respective operating instructions for how to operate the external audio source.
You will find details on volume (Y page 33) and sound (Y page 34) settings in the "At a glance" section.
G WARNING External audio sources may have different volumes, which can mean that system messages such as traffic announcements and navigation system announcements are much louder. If necessary, please deactivate the system messages or adjust their volume manually.
Increasing the volume using COMAND
In some cases, the volume of the external audio device may be quieter or louder, or the usual maximum possible volume may be lower. On some devices, it is possible to adjust the volume separately. In this case, start at a medium volume and increase it gradually. This enables you to determine whether the system is able to play the music at high volume without distorting it.
X Select Standard or Boost and press W to
confirm. Standard: the volume of the external audio source is adjusted to a standard value.
Boost: the volume of the external audio source is raised by approximately 10 dB.
184
COMAND features ............................. 186
General information ......................... 186
Basic settings .................................... 186
Video DVD mode ............................... 186
AUX video mode ................................ 192
Picture viewer ................................... 193
185
186 Video DVD mode
COMAND features
Changing the picture format
These Operating Instructions describe all standard and optional equipment available for your COMAND system at the time of purchase. Country-specific deviations are possible. Please note that your COMAND system may not be equipped with all the features described.
General information
Automatic picture shutoff
The video image is only displayed if the selector lever of the transmission is in position P.
If the selector lever of the transmission is changed from position P, the In order not to distract you from the traffic
situation, the picture is faded out
while the vehicle is in motion. message appears
As soon as the selector lever of the transmission is returned to position P, the video image is shown.
Basic settings
Picture settings
Adjusting the brightness, contrast or
color
X Press W the COMAND controller to show
the menu.
X Select DVD-Video by sliding VÆ and
turning cVd the COMAND controller and press W to confirm. A menu appears.
X Select Brightness, Contrast or Color by turning cVd the COMAND controller and press W to confirm.
X Press W the COMAND controller to show
the menu.
X Select DVD-Video by sliding VÆ and
turning cVd the COMAND controller and press W to confirm. A menu appears.
X Select 16:9 Optimized, 4:3 or
Widescreen and press W to confirm. The dot in front of the entry indicates the currently selected format.
X Select a setting by turning cVd the COMAND controller and press W to confirm.
Video DVD mode
Safety notes
G WARNING COMAND is classified as a Class 1 laser product. You must not open the casing. If you open the casing, or if the casing is faulty or damaged, there is a risk of exposure to invisible laser radiation. This may damage your eyes, or those of others.
COMAND does not contain any parts that can be serviced by the user. For safety reasons, all maintenance work must be carried out by qualified aftersales technicians.
G WARNING Only when the vehicle is stationary should you:
Rload a disc
Reject a disc
There is a risk of being distracted from the road and traffic conditions if this is done while the vehicle is in motion.
Notes about discs
Playback problems may occur when playing copied discs. There are a large variety of discs, DVD authoring software, writing software and writers available. This variety means that there is no guarantee that the system will be able to play discs that you have copied yourself.
! Do not affix stickers or labels to the discs,
as they could peel off and damage COMAND. Stickers can cause the disc to bend, which can result in read errors and disc recognition problems.
! COMAND is designed to accommodate
discs which comply with the EN 60908
standard. You can therefore only use discs with a maximum thickness of 1.3 mm.If you insert thicker discs, e.g. those that contain data on both sides (DVD on one side and audio data on the other), they cannot be ejected and can damage COMAND.
Use round discs with a diameter of 12 cm. Do not use discs with a diameter of 8 cm, even with an adapter.
DVD playback conditions
If video DVDs do not conform to the NTSC or PAL TV standards, they may create picture, sound or other problems during playback.
COMAND can play back video DVDs produced according to the following standards:
Rregion code 1 or region code 0 (no region
code)
RPAL or NTSC standard
You will generally find the relevant details either on the DVD itself or on the DVD case.
i If you insert a video DVD with a different region code, you will see a message to this effect.
Video DVD mode 187
i COMAND is set to region code 1 at the
factory. This setting can be changed at an authorized Mercedes-Benz Center. This will allow you to play video DVDs with a different region code, provided that they are produced in accordance with the PAL or NTSC standard. The region code can be changed up to five times.
Function restrictions
Depending on the DVD, it is possible that certain functions or actions will be temporarily blocked or may not function at all. As soon as you try to activate these functions or actions, you will see the K symbol in the display.
Inserting and removing DVDs
X Proceed as described in the "Inserting and
ejecting CDs and DVDs" section (Y page 154).
Switching to video DVD mode
Option 1
X DVD changer: insert a video DVD. X Press the h function button or the
% back button. COMAND loads the medium inserted and starts to play it.
Option 2
X Press theh function button one or more
times. COMAND switches to the previous disc operating mode.
188 Video DVD mode
i By pressing this function button
repeatedly, you can change the operating mode in the following order:
Raudio CD/DVD, video DVD or MP3 disc
in the DVD changer
Rmemory card mode
RMUSIC REGISTER
RUSB storage device
RMedia Interface or audio AUX mode
RBluetooth® audio mode
X Select Media by sliding VÆ and turning cVd the COMAND controller and press W to confirm.
X Select a ý video DVD from the media list
(Y page 190).
Option 3
X Select Video in the main function bar by
sliding ZV and turning cVd the COMAND controller and press W to confirm. Video DVD mode is switched on.
Hiding/showing the navigation menu
X To display: slide ZVÆ the COMAND
controller.
i This function is not available while the DVD's own menu (Y page 190) is being displayed.
X To hide: slide ZVÆ the COMAND
controller.
or
X Wait for approximately eight seconds.
Navigation menu displayed : Disc type
; Current title
= Current scene
? Track time
A To show the menu
Showing/hiding the menu
This function is not available while the DVD's own menu (Y page 190) is being displayed. X To display: in full-screen mode, press W
the COMAND controller.
or
X Select Menu while the navigation menu is
shown and press W to confirm.
X To hide: slide ZV the COMAND controller and confirm Full Screen by pressing W.
Menu shown : Video DVD options
; Pause function
= Stop function
Video DVD mode 189
? Media selection
A Sound settings
Fast forwarding/rewinding
X In full-screen mode, slide XVY and hold the
COMAND controller until the desired position has been reached.
Pause function
X Press W the COMAND controller to show
the menu.
X To pause playback: select Ë by
turning cVd the COMAND controller and press W to confirm. The Ë display changes to Ì.
X To continue playback: select Ì and
or X Press and hold the E or F button
press W to confirm. The menu is hidden.
until the desired position is reached. You see the navigation menu.
Stop function
X Press W the COMAND controller to show
the menu.
X To interrupt playback: select É by
turning cVd the COMAND controller and press W to confirm. The Ë display changes to Ì. The video image is hidden.
X To continue playback: select Ì and
press W to confirm. Playback continues from the point where it was interrupted.
X To stop playback: while playback is
interrupted, select É again and press W to confirm.
or X During playback, confirmÉ by pressing
W twice in rapid succession. Ì is highlighted.
X To restart playback: confirm the Ì
selection by pressing W. Playback restarts from the beginning.
Selecting a scene/chapter
If the film is divided into scenes or chapters, you can select them directly while the film is running, or skip forwards step-by-step. Some DVDs do not permit this at certain points (e.g. during the opening credits).
It may also be possible to select the scene/ chapter from within the menu stored on the DVD.
X To skip forwards or back: in full-screen
mode, turn cVd or slide XVY the COMAND controller.
or X Press the E or F button on the
control panel. The navigation menu (Y page 188) appears for approximately eight seconds.
Selecting a film/title
This function is only available if the DVD is divided into several films/titles. If the DVD contains several films, these can be selected directly. A film can be selected either when the DVD is being played back or when it is stopped.
The film can also be selected from the menu on the DVD itself.
190 Video DVD mode
X Press W the COMAND controller to show
i If you select a CD, an audio DVD or an
MP3 medium, you switch to the respective audio mode. You can find further information about the media list on (Y page 159).
DVD menu
Calling up the DVD menu
The DVD menu is the menu stored on the DVD itself. It is structured in various ways according to the individual DVD and permits certain actions and settings.
In the case of multi-language DVDs, for example, you can change the DVD language in the DVD menu. X In full-screen mode, press W the COMAND
controller to show the menu.
X Select DVD-Video in the menu by turning
cVd the COMAND controller and press W to confirm.
X Select DVD Functions and press W to
confirm.
X Select Menu and press W to confirm.
The DVD menu appears.
Selecting menu items in the DVD menu
X Select a menu item by sliding ZVÆ or
turning XVY the COMAND controller and press W to confirm. The menu appears.
i Menu items which cannot be selected are
shown in gray.
the menu.
X Select DVD-Video by turning cVd the
COMAND controller and press W to confirm.
X Select DVD Functions and press W to
confirm. A menu appears.
X Select Title Selection by turning cVd
the COMAND controller and press W to confirm.
X Select a film/title and press W to confirm.
Selecting a video DVD from the media
list
X Press W the COMAND controller to show
the menu.
X Select Changer or Media by sliding VÆ and turning cVd the COMAND controller and press W to confirm. The media list appears. The # dot indicates the current medium being played. Video DVDs are indicated by the ý icon.
X Equipped with a DVD changer: press W
the COMAND controller to display all magazine trays.
X Select a video DVD by turning cVd the
COMAND controller and press W to confirm. COMAND loads the video DVD and begins playing it.
Video DVD mode 191
X To reconfirm your selection: confirm
X In full-screen mode, press W the COMAND
Select by pressing W.
controller to show the menu.
COMAND executes the action.
X Select DVD-Video in the menu by turning
Make a selection from the further options, if necessary. COMAND then switches back to the DVD menu.
i Depending on the DVD, the menu items:
Back (to movie), Play, Stop, ., / or Go Up may not function or may not function at certain points in the DVD menu. To indicate this, the K icon appears in the display.
Moving up one level in the DVD menu
X Select the corresponding menu item in the
DVD menu and press W the COMAND controller to confirm.
or
X Select any menu item in the DVD menu and
press W the COMAND controller to confirm.
X Select Go Up and press W to confirm.
Back to the film
cVd the COMAND controller and press W to confirm.
X Select DVD Functions and press W to
confirm.
X Select Menu Language or Audio
Language and press W to confirm. In both cases, a menu appears after a few seconds. The # dot in front of an entry indicates the currently selected language.
X Select a setting by turning cVd the COMAND controller and press W to confirm.
Subtitles and camera angle
These functions are not available on all DVDs. The number of subtitle languages and camera angles available depends on the content of the DVD. It is possible that the settings may also be accessed in the DVD menu (Y page 190). X In full-screen mode, press W the COMAND
controller to show the menu.
X Press the % back button repeatedly
X Select DVD-Video in the menu by turning
until you see the movie.
or
cVd the COMAND controller and press W to confirm.
X Select the corresponding menu item from
X Select DVD Functions and press W to
the DVD menu.
confirm.
X Select Subtitles or Camera Angle and
press W to confirm. In both cases, a menu appears. The # dot in front of an entry indicates the current setting.
X Select a setting by turning cVd the COMAND controller and press W to confirm.
X Select the Back (to movie) menu item in
the menu and press W to confirm.
Setting the language and audio
format
This function is not available on all DVDs. If it is available, you can set the DVD menu language, the audio language or the audio format. The number of settings is determined by the DVD content. It is possible that the settings may also be accessed in the DVD menu (Y page 190).
192 AUX video mode
Interactive content
DVDs can contain interactive content (e.g. a video game). In a video game, for example, you may be able to influence events by selecting and triggering actions. The type and number of actions depend on the DVD. X Select an action by sliding ZVÆ or XVY the
COMAND controller and press W to execute it. A menu appears and the first entry, Select, is highlighted.
X Press W the COMAND controller.
AUX video mode
For details on how to operate the external video source, see the respective device's operating instructions.
AUX video mode
Connecting external video sources
Showing/hiding the menu
If your vehicle is equipped with a Media Interface (Y page 178), you can connect an external video source (AUX video).
The 1/8 inch audio/video jacks are in the center console stowage compartment.
i In vehicles with a rear view camera, the
AUX video jack cannot be used for external video sources.
Switching to AUX video mode
X Select Video in the main function bar by
sliding ZV and turning cVd the COMAND controller and press W to confirm. If AUX video mode was the last mode selected, it will now be active.
If another video source is switched on, you can now switch to AUX video mode in the video menu.
X Select Video and press W to confirm. X Select Aux and press W to confirm.
The AUX video menu appears. You will hear and see the content of the external video source if it is connected and switched to playback.
X To show: press W the COMAND
controller.
X To hide: slide ZV the COMAND controller and confirm Full Screen by pressing W.
Volume and sound settings
You will find details on volume (Y page 33) and sound (Y page 34) settings in the "At a glance" section.
G WARNING External video sources may have different volumes, which can mean that system messages such as traffic announcements and navigation system announcements are much louder. If necessary, please deactivate the system messages or adjust their volume manually.
i It may be the case that a device which is
connected as an external video source seems quieter or louder in the vehicle, or that the usual maximum volume cannot be reached. On some devices, it is possible to adjust the volume separately. In this case, start at a medium volume and increase it gradually. This enables you to determine
whether the system is able to play the sound at high volume without distorting it.
Increasing the volume using COMAND
X Select Volume in the AUX display by turning
cVd the COMAND controller and press W to confirm. A menu appears. The # dot indicates the current setting.
X Select Standard or Boost and press W to
confirm. Standard: the volume of the external video source is adjusted to a standard value.
Boost: the volume of the external video source is raised by approximately 10 dB.
Picture viewer
Introduction
If there are pictures on the active data medium, you can look at them.
Data medium
Supported picture
formats
jpeg, jpg
jpeg, jpg
CD/DVD with picture files
USB devices (sticks, hard drives)
SD memory card:
Calling up a category list
X Select a data medium (e.g. memory card)
with pictures in the audio menu (Y page 144) or in the media list (Y page 159).
X Select Search in the basic display by
sliding VÆ and turning cVd the COMAND controller and press W to confirm. The category list appears.
Picture viewer
193
Displaying pictures
X Select (Y page 166) Photos in the
category list by turning cVd the COMAND controller and press W to confirm. A folder directory appears.
X Select a folder with photos and press W to
confirm. The folder displays the existing picture files (example).
X Select a photo and press W to confirm. The photo is displayed and the music is stopped.
Changing the picture view
X Press W the COMAND controller.
A menu appears.
X To start playing music: confirm Search
by pressing W. The category list appears (Y page 165).
X Select a category by turning cVd the
COMAND controller and press W to confirm.
X Select other entries within the category (e.g. track, album) until the music starts playing.
194 Picture viewer
X To turn the picture clockwise: confirm
Turn Clockwise by pressing W the COMAND controller.
X To turn the picture counter-clockwise:
select Turn Counterclockwise by turning the cVd COMAND controller and press W to confirm.
X To zoom into a picture: select Zoom by
turning the cVd COMAND controller and press W to confirm. After you have zoomed into the picture, you can move the section of the picture.
X Slide ZVÆ and XVY the COMAND
controller.
X To return to the original size: press W
the COMAND controller.
Exiting the picture viewer
X Select Back To Menu in the menu by
turning cVd the COMAND controller and press W to confirm.
COMAND features ............................. 196
SIRIUS Weather ................................ 196
195
196 SIRIUS Weather
COMAND features
These Operating Instructions describe all standard and optional equipment available for your COMAND system at the time of purchase. Country-specific deviations are possible. Please note that your COMAND system may not be equipped with all the features described.
SIRIUS Weather
Introduction
i Hurricane: description of a tropical cyclone which mostly develop in the Atlantic Ocean or in the North Pacific Ocean or South Pacific Ocean. The wind speeds are above 74 mph (118 km/h). To characterize the strength of a hurricane, there are five categories.
Typhoon: the description of a tropical cyclone that develops in the North West Pacific Ocean. The wind speeds are in the category of a hurricane.
Switching the SIRIUS weather display
For the reception of weather forecasts via satellite radio, you will need a SIRIUS XM Satellite Weather subscription.
on/off
Switching on
When the Call SIRIUS to activate system at 888-539-7474 message with the SIRIUS device identification number appears, you will first have to obtain access to the weather service. A description of the procedure can be found in the "Registering satellite radio" section (Y page 149).
COMAND can receive weather forecasts via satellite radio for the entire USA (including Alaska and Hawaii). The received weather data can be displayed as an information chart (daily forecast, five-day forecast, detail information) or on the weather map.
The weather data received from a weather station is stored in COMAND for an hour and can be shown again immediately after restarting the engine (e.g. after refueling).
X Select the globe icon in the main function
bar by sliding ZV and turning cVd the COMAND controller and press W to confirm. The SIRIUS weather basic display appears.
X Confirm SIRIUS Weather by pressing W.
The weather map can display the following weather data with symbols:
The information chart shows the daily forecast at the current vehicle position.
Rrain radar
Rstorm characteristics
Rareas of high-pressure/low-pressure,
weather fronts
Rcourse of tropical cyclones (hurricanes,
typhoons)
Rwind direction and speeds
i The rain radar cannot be displayed for
Alaska, Hawaii and Puerto Rico.
SIRIUS Weather
197
Switching off
X Press the % button.
or X Select Back by turning cVd the COMAND
controller and confirm by pressing W. Both options appear in the SIRIUS weather basic menu.
Displaying detailed information
Besides the current temperatures, you can display information such as wind speeds and UV index.
X Select Info in the information chart by
turning cVd the COMAND controller and press W to confirm. The information chart shows detailed information for the selected area.
Daily forecast as an information chart (example)
You see the following information:
Rthe date and time of the weather message
received last
Rinformation on the current weather
(temperature, cloud cover) and forecast for the next 3, 6, 12 hours
Rthe current highest temperature and
forecasts
Rthe current lowest temperature and
forecasts
Rthe probability of rain
X To switch to the five-day forecast:
confirm 5-Day by pressing W. The information chart displays the forecast for the next five days in the currently selected location.
Selecting the area for the weather
forecast
Introduction
You can select the following areas:
Rthe current vehicle position
Rvicinity of the destination
Ra winter sports area
Ran area within the USA
You can select an area in the information chart (first option), on the map (second option) or from the memory, if you have
Five-day forecast as an information chart (example)
X To return to the daily forecast: confirm
Current by pressing W.
198 SIRIUS Weather
already saved areas in the memory (Y page 199).
i COMAND receives weather forecast data
from the nearest weather station at the selected destination.
Option 1: selecting the location in the
information chart
X Select Position in the information chart by turning cVd the COMAND controller and press W to confirm. A menu appears.
"Selecting the area for the weather forecast" menu
X To select the current vehicle position:
select Current Position and press W to confirm. COMAND receives the weather data for the current vehicle position from the nearest weather station and displays it automatically.
X To select the vicinity of the
destination: select Near Destination in the menu by turning cVd the COMAND controller and press W to confirm.
i You can select Near Destination if a
route has been calculated (Y page 57). The menu item is otherwise grayed out.
X To select winter sport areas: select In Winter Sports Areas in the menu, and confirm by pressing W.
X Select a state, e.g. Colorado, and press
W to confirm.
X Select a winter sports area from the menu
and press W to confirm. The weather data and other information is displayed for the winter sports area that has been selected. The data is supplied by the nearest weather station.
The information chart shows the following information (if available):
Rski slopes/ski lifts
Rsnowboarding and nighttime opening
Rsnow conditions (e.g. snow depth)
Rtemperature
X To select the vicinity of another
location: select Search Locations in the menu by turning cVd the COMAND controller and press W to confirm.
SIRIUS Weather
199
Memory functions
Storing the area in the weather memory
For areas that are frequently called up, 10
presets (0, 1 – 9) are available in the weather memory.X In the preset memory: select the area for
the weather forecast (Y page 197). The selected area is shown at the top in the status bar.
X Select Position in the information chart by turning cVd the COMAND controller and press W to confirm.
