traffic conditions into account. Only use the DISTRONIC PLUS if the road, weather and traffic conditions make it advisable to travel at a constant speed. G WARNING Use of the DISTRONIC PLUS can be dangerous on slippery roads. Rapid changes in tire traction can result in wheel spin and loss of control. The DISTRONIC PLUS does not function in adverse sight and distance conditions. Do not use the DISTRONIC PLUS during conditions of fog, heavy rain, snow or sleet. G WARNING The DISTRONIC PLUS cannot take weather conditions into account. Switch off the DISTRONIC PLUS or do not switch it on if: Rroads are slippery or covered with snow or
ice. The wheels could lose traction while braking or accelerating, and the vehicle could skid.
Rthe DISTRONIC PLUS system sensor covers
are dirty or visibility is diminished due to snow, rain or fog, for example. The distance control system functionality could be impaired.
Always pay attention to surrounding traffic conditions even while the DISTRONIC PLUS is switched on. Otherwise, you may not be able to recognize dangerous situations until it is too late. This could cause an accident in which you and/or others could be injured. G WARNING The "Resume" function should only be operated if the driver is fully aware of the previously set speed and wishes to resume this particular preset speed.
G WARNING Your undivided attention to street and traffic conditions is necessary at all times whether DISTRONIC PLUS is active or not. The use of DISTRONIC PLUS can be dangerous on winding roads or in heavy traffic because conditions do not allow safe driving at a constant speed. DISTRONIC PLUS does not react to stationary objects on the road (for example, a vehicle stopped in traffic or an abandoned vehicle). DISTRONIC PLUS likewise does not react to oncoming vehicles. Deactivate DISTRONIC PLUS: Rwhen changing to the right lane, if the
vehicles in the left lane are driving slower
Rwhen driving into a filter lane or an
expressway exit
Rin complex driving situations, for example
in construction sites on an expressway In these situations DISTRONIC PLUS will maintain the set speed if it is not deactivated. DISTRONIC PLUS is intended only for maintaining a set speed and a set distance from the objects moving in front of the vehicle. G WARNING An intermittent warning sounds and the distance warning lamp · in the instrument cluster is illuminated if the DISTRONIC PLUS system calculates that the distance to the vehicle ahead and your vehicle's current speed indicate that the DISTRONIC PLUS will not be capable of slowing the vehicle sufficiently to maintain the preset following distance, which creates a danger of a collision. Immediately brake the vehicle to increase your distance to the preceding vehicle. The warning sound is intended as a final caution in which you should intercede with your own braking inputs to avoid a potentially dangerous situation. Do not wait for the operation of the warning signal to intercede
Driving systems
301
with your own braking. This will result in potentially dangerous emergency braking which will not always result in an impact being avoided. Tailgating increases the risk of an accident. G WARNING DISTRONIC PLUS brakes your vehicle with a maximum deceleration of 13 ft/s2 (4 m/s2). This corresponds to approximately 40% of your vehicle's maximum braking force. To avoid a collision, you must apply the brakes yourself. DISTRONIC PLUS brakes the vehicle just enough to restore the preset speed or the preset distance to the vehicle in front. G WARNING If you do not receive visual or acoustic warning signals during a critical traffic situation, DISTRONIC PLUS has either not recognized the collision risk, has been deactivated or is malfunctioning. Remember, whether or not DISTRONIC PLUS is operating, it is ultimately always the drivers responsibility to apply the brakes in order to control the vehicle and avoid a collision.
Cruise control lever
: To store the current speed or a higher
speed
; To store the current speed or a lower
speed
= To deactivate DISTRONIC PLUS
? Storing the current speed or calling up the
last stored speed
A Setting the specified minimum distance
Switching on DISTRONIC PLUS, storing and maintaining the current speed Important safety notes G WARNING The vehicle can be braked when DISTRONIC PLUS is activated. For this reason, deactivate DISTRONIC PLUS if the vehicle is to be set in motion by other means (e.g. in a car wash or by towing).
In order to activate DISTRONIC PLUS, the following conditions must be fulfilled: Rthe engine must be started. It may take up
to two minutes after pulling away before DISTRONIC PLUS is operational.
Rthe electric parking brake must be
released.
RESP® must be active, but not intervening. Rthe transmission must be in position D. Rthe hood must be closed. Rthe driver's door must be closed when you shift from P to D or your seat belt must be fastened.
Rthe front-passenger door must be closed. Rthe vehicle must not skid. Activating while driving When driving at speeds below 20 mph (30 km/h), you can only activate DISTRONIC PLUS if the vehicle in front has been detected and is shown in the multifunction display. If the vehicle in front is no longer detected and displayed, DISTRONIC PLUS switches off and a tone sounds.
302 Driving systems
X Briefly pull the cruise control lever towards
you ?, or press it up : or down ;. DISTRONIC PLUS is selected.
X Press the cruise control lever repeatedly up : or down ; until the desired speed is set.
X Remove your foot from the accelerator
pedal. Your vehicle adapts its speed to that of the vehicle in front, but only up to the desired stored speed. i If you do not fully release the accelerator pedal, the DISTRONIC PLUS Override message appears in the multifunction display. The set distance to a slower- moving vehicle in front will then not be maintained. You will be driving at the speed you determine by the position of the accelerator pedal.
Activating when driving towards a stationary vehicle If the vehicle in front of you is stationary, you can only activate DISTRONIC PLUS once your vehicle is stationary as well. X Briefly pull the cruise control lever towards
you ?, or press it up : or down ;. DISTRONIC PLUS is selected.
i DISTRONIC PLUS can only be activated at under 20 mph (30km/h) if a vehicle in front has been detected. Therefore, the DISTRONIC PLUS distance display in the instrument cluster should be activated (Y page 347).
X Press the cruise control lever repeatedly up : or down ; until the desired speed is set.
i You can use the cruise control lever to set
the stored speed and the control on the cruise control lever to set the specified minimum distance (Y page 304).
Pulling away X If the vehicle in front pulls away: remove
your foot from the brake pedal.
X Briefly pull the cruise control lever towards
you ?.
or X Accelerate briefly.
Your vehicle pulls away and adapts its speed to that of the vehicle in front.
Driving If there is no vehicle in front, DISTRONIC PLUS operates in the same way as cruise control. If DISTRONIC PLUS detects that the vehicle in front has slowed down, it brakes your vehicle. In this way, the distance you have selected is maintained. If DISTRONIC PLUS detects that the vehicle in front is driving faster, it accelerates your vehicle, but only up to the speed you have stored. G WARNING If you depress the brake, DISTRONIC PLUS is deactivated unless your vehicle is stationary. DISTRONIC PLUS then no longer brakes your vehicle. In such cases, control the distance from vehicles travelling in front with the brake alone. You could otherwise cause an accident and thereby injure yourself and others. The driver remains fully responsible for the vehicle's distance from other vehicles, the speed being driven and for braking in good time.
Changing lanes If you change to the passing lane, DISTRONIC PLUS supports you when: Ryou are driving faster than 40mph
(60 km/h).
RDISTRONIC PLUS is maintaining the
distance to a vehicle in front.
Ryou switch on the appropriate turn signal. RDISTRONIC PLUS does not detect a danger
of collision.
Driving systems
303
If these conditions are fulfilled, your vehicle is accelerated. Acceleration will be interrupted if changing lanes takes too long or if the distance between your vehicle and the vehicle in front becomes too small. i When changing lanes, DISTRONIC PLUS
monitors the left lane on left-hand drive vehicles and the right lane on right-hand drive vehicles. G WARNING DISTRONIC PLUS and Active Blind Spot Assist are only aids designed to assist driving. They do not relieve you of the responsibility of paying attention. The driver remains fully responsible for the vehicle's distance from other vehicles, the vehicle's speed and for braking in good time. Always pay attention to traffic conditions and your surroundings. Otherwise, you may fail to recognize dangers in time, cause an accident and injure yourself and others.
Stopping G WARNING Never get out of the vehicle when DISTRONIC PLUS is activated. DISTRONIC PLUS must also never be operated, activated or deactivated by a passenger or from outside the vehicle. DISTRONIC PLUS does not replace the electric parking brake and must not be used for parking. The DISTRONIC PLUS braking effect is canceled and the vehicle can start moving if: RDISTRONIC PLUS is deactivated using the
cruise control lever.
Ryou accelerate. Rthere is a malfunction in the system or an
interruption in the power supply, e.g. battery failure.
Rthe electrical system in the engine
compartment, the battery or the fuses are tampered with.
Rthe battery is disconnected.
If you wish to leave the vehicle or park it, deactivate DISTRONIC PLUS and secure the vehicle against rolling away.
If DISTRONIC PLUS detects that the vehicle in front is stopping, it brakes your vehicle until it is stationary. Once your vehicle is stationary, it remains stationary and you do not need to depress the brake. i After a time, the electric parking brake
secures the vehicle and relieves the service brake.
i Depending on the specified minimum
distance, your vehicle will come to a standstill at a sufficient distance behind the vehicle in front. The specified minimum distance is set using the control on the cruise control lever.
Setting a speed G WARNING Keep in mind that it may take a brief moment until the vehicle has made the necessary adjustments. Increase or decrease the set vehicle speed to a value that the prevailing road conditions and legal speed limits permit. Otherwise, sudden and unexpected acceleration or deceleration of the vehicle could cause an accident and/ or serious injury to you and others.
X Press the cruise control lever up : for a higher speed or down ; for a lower speed.
X To adjust the speed in 1 mph
increments (1 km/h increments): briefly press the cruise control lever up : or down ; to the pressure point. The last speed stored is increased or decreased every time the cruise control lever is pushed up : or down ;.
X To adjust the speed in 5 mph
increments (10 km/h increments): briefly press the cruise control lever
304 Driving systems
up : or down ; beyond the pressure point. The last speed stored is increased or decreased every time the cruise control lever is pushed up : or down ;.
i DISTRONIC PLUS is not deactivated if you
depress the accelerator pedal. If you accelerate to overtake, DISTRONIC PLUS adjusts the vehicle's speed to the last speed stored after you have finished overtaking.
Storing the current speed or calling up a stored speed G WARNING The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from returning to the preset speed could cause an accident and/or serious injury to you and others.
X Briefly pull the cruise control lever towards
you ?.
X Remove your foot from the accelerator
pedal. DISTRONIC PLUS is activated. The first time it is activated, the current speed is stored. Otherwise, it sets the vehicle cruise speed to the previously stored value.
Setting the specified minimum distance You can set the specified minimum distance for DISTRONIC PLUS by varying the time span between one and two seconds. With this function, you can set the minimum distance that DISTRONIC PLUS keeps to the vehicle in front, dependent on vehicle speed. You can see this distance in the multifunction display (Y page 305). G WARNING It is up to the driver to exercise discretion to select the appropriate setting given road
conditions, traffic, driver's preferred driving style and applicable laws and driving recommendations for safe following distance.
X To increase: turn control ; in direction
=. DISTRONIC PLUS then maintains a greater distance between your vehicle and the vehicle in front.
X To decrease: turn control ; in
direction :. DISTRONIC PLUS then maintains a shorter distance between your vehicle and the vehicle in front.
i Make sure that you maintain a sufficiently
safe distance from the vehicle in front. Adjust the distance to the vehicle in front if necessary.
DISTRONIC PLUS displays in the speedometer
When you switch on DISTRONIC PLUS, triangle ; shows the stored speed.
Driving systems
305
i For design reasons, the speed displayed in the speedometer may differ slightly from the speed set for DISTRONIC PLUS.
If DISTRONIC PLUS detects a vehicle in front, the speedometer dial lights up between speed of the vehicle in front : and stored speed ;.
DISTRONIC PLUS displays in the multifunction display General notes You can select the distance display in the Assistance menu (Y page 347) of the on- board computer.
Display when DISTRONIC PLUS is deactivated X Select the Distance Display function using the on-board computer (Y page 347).
When DISTRONIC PLUS is deactivated, you will see the following in the multifunction display:
: Symbol for activated PRE-SAFE® Brake ; Vehicle in front, if detected = Distance indicator, current distance to
the vehicle in front
? Specified minimum distance to the
vehicle in front; adjustable
A Own vehicle
Display when DISTRONIC PLUS is activated X Select the Distance display function using the on-board computer (Y page 347).
You will see the stored speed for about five seconds when you activate DISTRONIC PLUS. After this time, you will see the following in the multifunction display while DISTRONIC PLUS is activated:
: DISTRONIC PLUS activated ; Own vehicle = Specified minimum distance to the
vehicle in front; adjustable ? Vehicle in front, if detected
Deactivating DISTRONIC PLUS
There are several ways to deactivate DISTRONIC PLUS: X Briefly press the cruise control lever
forwards :.
or X Brake, unless the vehicle is stationary.
306 Driving systems
G WARNING The DISTRONIC PLUS works to maintain the speed selected by the driver unless a moving obstacle proceeding directly ahead of it in the same travel direction is detected (e.g. following another vehicle ahead of you at your set distance). This means that: RYour vehicle can pass another vehicle after
you have changed lanes.
RWhile in a sharp turn or if the preceding vehicle is in a sharp turn, the DISTRONIC PLUS could lose sight of the preceding vehicle. Your vehicle could then accelerate to the previously selected speed.
The DISTRONIC PLUS regulates only the distance between your vehicle and those directly ahead of it. It may not register stationary objects in the road, e.g.: Ra stopped vehicle in a traffic jam Ra disabled vehicle Ran oncoming vehicle The driver must always be alert, observe all traffic and intercede as required by means of steering or braking the vehicle. G WARNING The DISTRONIC PLUS should not be used in snowy or icy road conditions.
Cornering, going into and coming out of a bend
When you deactivate DISTRONIC PLUS, the DISTRONIC PLUS Off message is shown in the multifunction display for approximately five seconds. i The last speed stored remains stored until
you switch off the engine.
DISTRONIC PLUS is automatically deactivated if: Ryou engage the electric parking brake or if
the vehicle is automatically secured with the electric parking brake
Ryou are driving slower than 15 mph
(25 km/h) and there is no vehicle in front, or if the vehicle in front is no longer detected
RESP® intervenes or you deactivate ESP® Rthe transmission is in the P, R or N position Ryou pull the cruise control lever towards you in order to pull away and the front- passenger door is open Rthe vehicle has skidded If DISTRONIC PLUS is deactivated, you will hear a warning tone. The DISTRONIC PLUS Off message is shown in the multifunction display for approximately five seconds. G WARNING DISTRONIC PLUS is deactivated and releases the brakes if the vehicle is slowed down to a speed below 20 mph (30km/h) by the system, provided that DISTRONIC PLUS does not detect a vehicle directly in front. At this point, the driver must apply the brakes in order to slow down further and bring the vehicle to a standstill.
Tips for driving with DISTRONIC PLUS Important safety notes The following contains descriptions of certain road and traffic conditions in which you must be particularly attentive. In such situations, brake if necessary. DISTRONIC PLUS is then deactivated.
Driving systems
307
The ability of DISTRONIC PLUS to detect vehicles when cornering is limited. Your vehicle may brake unexpectedly or late. Vehicles traveling on a different line
DISTRONIC PLUS has not yet detected the vehicle in front on the edge of the road, because of its narrow width. The distance to the vehicle in front will be too short. Obstructions and stationary vehicles
DISTRONIC PLUS may not detect vehicles traveling on a different line. The distance to the vehicle in front will be too short. Other vehicles changing lane
DISTRONIC PLUS does not brake for obstacles or stationary vehicles. If, for example, the detected vehicle turns a corner and reveals an obstacle or stationary vehicle, DISTRONIC PLUS will not brake for these. Crossing vehicles
DISTRONIC PLUS has not detected the vehicle cutting in yet. The distance to this vehicle will be too short. Narrow vehicles
DISTRONIC PLUS may mistakenly detect vehicles that are crossing your lane. Activating DISTRONIC PLUS at traffic lights with crossing traffic, for example, could cause your vehicle to pull away unintentionally.
308 Driving systems
HOLD function General notes The HOLD function can assist the driver in the following situations: Rwhen pulling away, especially on steep
slopes
Rwhen maneuvering on steep slopes Rwhen waiting in traffic The vehicle is kept stationary without the driver having to depress the brake pedal. The braking effect is canceled and the HOLD function deactivated when you depress the accelerator pedal to pull away.
Activation conditions You can activate the HOLD function if: Rthe vehicle is stationary. Rthe driver's door is closed or your seat belt
is fastened.
Rthe electric parking brake is released. Rthe hood is closed. Rthe transmission is in position R, N or D. The trunk lid must be closed in position R.
RDISTRONIC PLUS is deactivated.
Activating the HOLD function X Make sure that the activation conditions
are met.
X Depress the brake pedal. X Quickly depress the brake pedal further
until ë appears in the instrument cluster. The HOLD function is activated. You can release the brake pedal.
i If depressing the brake pedal the first
time does not activate the HOLD function, wait briefly and then try again. G WARNING The vehicle's brakes are applied when the HOLD function is activated. For this reason, deactivate the HOLD function if the vehicle is
to be set in motion by other means (e.g. in a car wash or by towing).
Deactivating the HOLD function The HOLD function is deactivated automatically if: Ryou accelerate and the transmission is in
position D or R.
Ryou shift the transmission to position P. Ryou apply the brakes again with a certain amount of pressure until ë disappears from the instrument cluster.
Ryou secure the vehicle using the electric
parking brake.
Ryou activate DISTRONIC PLUS. i After a time, the electric parking brake
secures the vehicle and relieves the service brake. G WARNING Never get out of the vehicle when the HOLD function is activated. The HOLD function must never be operated or deactivated by a passenger or from outside the vehicle. The HOLD function does not replace the electric parking brake and must not be used for parking. The braking effect of the HOLD function is canceled and the vehicle could roll away if: Rthe HOLD function is deactivated by
depressing the accelerator pedal or the brake pedal.
Rthere is a malfunction in the system or an
interruption in the power supply, e.g. battery failure.
Rthe electrical system in the engine
compartment, the battery or the fuses are tampered with.
Rthe battery is disconnected. If you leave the vehicle or park it, deactivate the HOLD function and secure the vehicle against rolling away.
Driving systems
309
AIRMATIC Vehicle level Important safety notes Your vehicle regulates its height automatically. All-round level control ensures the best possible suspension and constant ground clearance, even with a laden vehicle. When you drive fast, the vehicle is lowered automatically to improve driving safety and to reduce fuel consumption. The following vehicle levels are possible: RNormal Rraised: the vehicle is raised by about
1.20 in (30 mm) when compared with the normal level
Rlowered: the vehicle is lowered by about 0.40 in (10 mm) when compared with the normal level
The "Normal" and "Raised" vehicle levels can be set manually. The "Lowered" vehicle level is set automatically at speeds over 60 mph (100 km/h). Setting the vehicle level Select the "Normal" setting for normal road surfaces and "Raised" for driving with snow chains or on particularly poor road surfaces. Your selection remains stored even if you remove the SmartKey from the ignition lock. G WARNING To help avoid personal injury, keep hands and feet away from wheel housing area, and stay away from under the vehicle when lowering the vehicle chassis.
Setting raised level X Start the engine. If indicator lamp ; is not lit: X Press button :.
Indicator lamp ; lights up. The vehicle height is adjusted to raised level. The Vehicle Rising message appears in the display.
The "Raised level" setting is canceled if you: Rdrive at speeds above 75 mph (120 km/h) Rdrive for about three minutes at speeds
above 50 mph (80 km/h).
The "Raised level" remains active when you are not driving within these speed ranges. Setting the normal level X Start the engine. If indicator lamp ; is lit: X Press button :.
Indicator lamp ; goes out. The vehicle is adjusted to normal level.
Suspension tuning General notes The Adaptive Damping System (ADS) automatically controls the calibration of the dampers and springs.
310 Driving systems
The damping is tuned individually to each wheel and depends on: Ryour driving style, e.g. sporty Rthe road surface condition, e.g. bumps Ryour individual selection, i.e. sports or
comfort
Your selection remains stored even if you remove the SmartKey from the ignition lock.
Sports tuning The firmer suspension tuning in Sport mode ensures even better contact with the road. Select this mode when employing a sporty driving style, e.g. on winding country roads. X If indicator lamp ; is not lit: press
button :. Indicator lamp ; lights up. Sports suspension tuning is selected. The AIRMATIC SPORT message appears in the multifunction display.
Comfort tuning In Comfort mode, the driving characteristics of your vehicle are more comfortable. Therefore, select this mode if you favor a more comfortable driving style. Select comfort mode also when driving fast on straight roads, e.g. on straight stretches of freeway. X If indicator lamp ; is lit: press
button :. Indicator lamp ; goes out. Comfort tuning is selected.
The AIRMATIC COMFORT message appears in the multifunction display.
Active Body Control (ABC) Vehicle level Your vehicle automatically adjusts its ride height to improve driving safety and reduce fuel consumption. Depending on the vehicle height that has been set, the vehicle automatically adjusts its height dependent on the current speed. As speed increases, the vehicle is lowered by up to 0.4 in (10 mm). As the speed is reduced, the vehicle is raised up to the set vehicle height. G WARNING The vehicle is lowered when the engine is switched off. Therefore, make sure that nobody is in the vicinity of the wheel housing or under the vehicle when you switch off the engine. Otherwise, limbs could become trapped.
! The vehicle is lowered when the engine is switched off. When parking, position your vehicle so that it does not make contact with the curb as the vehicle is lowered. Your vehicle could otherwise be damaged.
i For AMG vehicles: when the engine is switched off, the vehicle is lowered by approx. 0.2 in (5 mm). Setting the vehicle level Select the "Normal" setting for normal road surfaces and "Raised" for driving with snow chains or on particularly poor road surfaces. G WARNING To help avoid personal injury, keep hands and feet away from wheel housing area, and stay away from under the vehicle when lowering the vehicle chassis.
Your selection remains stored even if you remove the SmartKey from the ignition lock.
Driving systems
311
Setting raised level X Start the engine. If indicator lamp ; is not lit: X Press button :.
Indicator lamp ; lights up. The vehicle height is adjusted to raised level.
Setting the normal level X Start the engine. If indicator lamp ; is lit: X Press button :.
Indicator lamp ; goes out. The vehicle is adjusted to normal level.
Suspension tuning The electronically controlled ABC suspension system works continuously. This improves driving safety and comfort. The ABC suspension system is tuned individually to each wheel and depends on: Ryour driving style, e.g. sporty Rthe road surface condition, e.g. bumps Ryour individual selection, i.e. sports or
comfort
Rthe vehicle load Your selection remains stored even if you remove the SmartKey from the ignition lock.
Sports tuning The firmer suspension tuning in Sport mode ensures even better contact with the road. Select this mode when employing a sporty driving style, e.g. on winding country roads. X If indicator lamp ; is not lit: press
button :. Indicator lamp ; lights up. You have selected the suspension for a sporty driving style. The ABC Active Body Control SPORT message appears in the multifunction display.
Comfort tuning In Comfort mode, the driving characteristics of your vehicle are more comfortable. Therefore, select this mode if you favor a more comfortable driving style. X If indicator lamp ; is lit: press
button :. Indicator lamp ; goes out. You have selected the suspension for a comfortable driving style. The ABC Active Body Control COMFORT message appears in the multifunction display.
4MATIC (permanent four-wheel drive) 4MATIC ensures that all four wheels are permanently driven. Together with ESP®, it improves the traction of your vehicle
312 Driving systems
PARKTRONIC is an electronic parking aid with ultrasonic sensors. It indicates visually and audibly the distance between your vehicle and an object. PARKTRONIC is activated automatically when you: Rswitch on the ignition Rshift the transmission to position D, R or N Rrelease the electric parking brake PARKTRONIC is deactivated at speeds above 11 mph (18km/h). It is reactivated at lower speeds. PARKTRONIC monitors the area around your vehicle using six sensors in the front and four sensors in the rear.
: Example: sensors in the front bumper,
left-hand side
Range of the sensors General notes The sensors must be free of dirt, ice and slush. Otherwise, they may not function correctly. Clean the sensors regularly, taking care not to scratch or damage them (Y page 431).
whenever a drive wheel spins due to insufficient grip. G WARNING If a drive wheel is spinning due to insufficient traction: RWhile driving off, apply as little throttle as
possible.
RWhile driving, ease up on the accelerator
pedal.
RAdapt your speed and driving style to the
prevailing road conditions.
Failure to observe these guidelines could cause the vehicle to skid. 4MATIC cannot prevent accidents resulting from excessive speed.
! Never tow the vehicle with one axle
raised. This may damage the transfer case. Damage of this sort is not covered by the Mercedes-Benz Limited Warranty. All wheels must remain either on the ground or be fully raised. Observe the instructions for towing the vehicle with all wheels in full contact with the ground.
i In wintry driving conditions, the maximum
effect of 4MATIC can only be achieved if you use winter tires (M+S tires), with snow chains if necessary.
PARKTRONIC Important safety notes G WARNING The PARKTRONIC is a supplemental system. It is not intended to, nor does it replace, the need for extreme care. The responsibility during parking and other critical maneuvers always remains with the driver. G WARNING Make sure no persons or animals are in or near the area in which you are parking/ maneuvering. Otherwise, they could be injured.
Driving systems
313
Ultrasonic sources such as an automatic car wash, the compressed-air brakes on a truck or a pneumatic drill could cause PARKTRONIC to malfunction. PARKTRONIC may not function correctly on uneven terrain.
Side view
Corners
Minimum distance Center
approximately 8in (approximately 20cm) approximately 8in (approximately 20cm)
If there is an obstacle within this range, the relevant warning displays light up and a warning tone sounds. If the distance falls below the minimum, the distance may no longer be shown.
Warning displays The warning displays show the distance between the sensors and the obstacle. The warning display for the front area is in the instrument cluster. The warning display for the rear area is located on the headliner in the rear compartment.
Warning display for the front area : Segments on the left-hand side of the
vehicle
; Segments on the right-hand side of the
vehicle
= Segments showing operational readiness The warning display for each side of the vehicle is divided into five yellow and two red segments. PARKTRONIC is operational if
Top view Front sensors Center
Corners
Rear sensors Center
Corners
approximately 40in (approximately 100cm) approximately 24in (approximately 60cm)
approximately 48in (approximately 120cm) approximately 32in (approximately 80cm)
! When parking, pay particular attention to objects above or below the sensors, such as flower pots or trailer drawbars. PARKTRONIC does not detect such objects when they are in the immediate vicinity of the vehicle. You could damage the vehicle or the objects. The sensors may not detect snow and other objects that absorb ultrasonic waves.
If indicator lamp ; lights up, PARKTRONIC is
deactivated.
i PARKTRONIC is automatically activated
when you turn the SmartKey to position 2
in the ignition lock.
314 Driving systems
yellow segments showing operational readiness = light up. The selected transmission position determines which warning display is active when the engine is running. Transmission position
Warning display
Front area activated Rear and front areas activated If the electric parking brake is engaged: no areas are activated If the electric parking brake is released: rear and front areas are activated No areas activated
One or more segments light up as the vehicle approaches an obstacle, depending on the vehicle's distance from the obstacle. When the first red segment lights up, you hear an intermittent warning for about two seconds. From the second red segment, you hear a continuous warning. This indicates that you have now reached the minimum distance.
Deactivating/activating PARKTRONIC
: To deactivate/activate PARKTRONIC ; Indicator lamp
Problems with PARKTRONIC
Driving systems
315
Problem Only the red segments in the PARKTRONIC warning displays are lit. You also hear a warning tone for approximately two seconds. PARKTRONIC is deactivated after approximately 20 seconds, and the indicator lamp in the PARKTRONIC button lights up. Only the red segments in the PARKTRONIC warning displays are lit. PARKTRONIC is deactivated after approximately 20 seconds.
Possible causes/consequences and M Solutions PARKTRONIC has malfunctioned and has switched off. X If problems persist, have PARKTRONIC checked at a qualified
specialist workshop.
The PARKTRONIC sensors are dirty or there is interference. X Clean the PARKTRONIC sensors (Y page 431). X Switch the ignition back on. The problem may be caused by an external source of radio or ultrasound waves. X See if PARKTRONIC functions in a different location.
Parking Guidance Important safety notes Parking Guidance is an electronic parking aid with ultrasound. Ultrasound is used to measure the road on both sides of the vehicle. A suitable parking space is indicated by the parking symbol. You receive steering instructions when parking. You may also use PARKTRONIC (Y page 312). G WARNING Parking Guidance is merely an aid and may display parking spaces that are not suitable for parking, for example: Rno-parking areas Rparking spaces with unsuitable surfaces
(road surface)
Rdriveways Rentrances and exits Parking Guidance detects and measures potential parking spaces while driving past. Changes to the parking space after this point are not taken into account, for example if the vehicle in front of or behind the parking space changes position or objects in the parking space are moved. Even when using Parking Guidance, you are still responsible for driving carefully. If you rely on Parking Guidance alone, you could cause an accident and injure yourself and others. Safety always remains your responsibility and you must continue paying careful attention to your immediate surroundings when parking and maneuvering.
316 Driving systems
G WARNING Objects located above the height range of Parking Guidance will not be detected when the parking space is measured. These objects are not taken into account when the parking procedure is calculated, e.g. overhanging loads, tail sections or loading ramps of goods vehicles. Under some circumstances, Parking Guidance might therefore issue steering instructions too soon. This may lead to a collision. For this reason, you should avoid using Parking Guidance in such situations. G WARNING Make sure that no persons or animals are in the maneuvering range. Otherwise, they could be injured.
! Pay particular attention to low objects or
objects with flat surfaces, such as trailer drawbars, posts, cross beams and curbs. These types of objects cannot be detected by Parking Guidance and may damage the vehicle.
When PARKTRONIC is deactivated, Parking Guidance is also unavailable. Use Parking Guidance for parking spaces: Rthat are parallel to the direction of travel Rthat are on straight roads, not bends Rthat are on the same level as the road, i.e. not on the pavement, for example. Parking Guidance may not detect flat curbs
Parking tips: Ron narrow roads, drive past the parking
space as close as possible.
Rparking spaces that are littered, overgrown
or partially occupied by trailer drawbars might be identified incorrectly or not at all. Rsnowfall or heavy rain may lead to a parking
space being measured inaccurately.
Rpay attention to the PARKTRONIC
(Y page 313) warning messages during the parking procedure.
Rwhen transporting a load which protrudes from your vehicle, you must not use Parking Guidance.
Rnever use Parking Guidance with snow
chains or an emergency spare wheel mounted.
Rmake sure that the tire pressures are
always correct. This has a direct effect on the steering instructions.
Rthe way your vehicle is positioned in the parking space after parking is dependent on various factors. These include the position and shape of the vehicles parked in front and behind it and the conditions of the location. In some cases, Parking Guidance may guide you too far or not far enough into a parking space. In some cases, it may also lead you across or onto the curb. If necessary, cancel the parking procedure with Parking Guidance.
! If unavoidable, you should drive over
obstacles such as curbs slowly and not at a sharp angle. Otherwise, you may damage the wheels or tires.
Detecting parking spaces
: Detected parking space on the left ; Parking symbol = Detected parking space on the right Parking Guidance is automatically activated when you drive forwards. The system is operational at speeds of up to approximately 22 mph (35 km/h). While in operation, the system independently locates and measures parking spaces on both sides of the vehicle. At speeds below 19 mph (30km/h), you see white parking symbol ; in the instrument cluster as a status indicator. Parking
Driving systems
317
Guidance only shows parking spaces on the passenger side in the default setting. Parking spaces on the driver's side are displayed as soon as the turn signal on the driver's side is activated. To park on the driver's side, you must leave the driver's side turn signal switched on until you have engaged reverse gear. If a parking space is detected, parking symbol ; changes to blue. Additionally, an arrow pointing to the right = or left : is shown. Parking Guidance will only detect parking spaces: Rthat are closed in at the back Rthat are parallel to the direction of travel Rthat are at least 5 ft (1.5 m) wide Rthat are at least 4.3 ft (1.3 m) longer than
your vehicle.
A parking space is displayed while you are driving past it, and until you are approximately 50 ft (15 m) away from it.
Parking The following instructions refer to parking in a space on the front-passenger side. To park in a space on the driver's side, mirror the instructions. G WARNING The Parking Guidance is only an aid and may not detect all obstacles. The Parking Guidance does not relieve you of the responsibility to pay attention. You are always responsible for safety and must continue to pay attention to your immediate surroundings when parking and maneuvering. Otherwise, you could endanger yourself and others.
X Stop the vehicle when the blue parking space symbol shows the desired parking space in the instrument cluster.
X Engage reverse gear. The multifunction display shows the message: Check surroundings Confirm with OK. X Press a on the multifunction steering
wheel to confirm. The display in the instrument cluster switches to Parking Guidance.
: Green lane ; White bracket marking the target position X Depending on the distance, you may have
to reverse along the lane towards the parking space. This is indicated by green lane :. Continue backing up until you hear a tone. Stop; the parking position has been reached and is marked by white bracket ; with an arrow for the target position.
318 Driving systems
Countersteering
Steering tips : Red lane indicating the route the vehicle
will take with the steering wheel in its current position
; Yellow lane indicating the route the
vehicle will take when you have turned the steering wheel in the required direction X Turn the steering wheel while the vehicle is
stationary until red lane : and yellow lane ; overlap. Lane ; is then marked in green and you hear a tone. If the parking space is inside the area displayed, the end of the green lane is marked with a white bracket and an arrow showing the target position.
Backing up into a parking space
: Red lane indicating the route the vehicle
will take with the steering wheel in its current position
; Yellow lane indicating the route the
vehicle will take when you have turned the steering wheel in the required direction X Turn the steering wheel while the vehicle is
stationary until red lane : and yellow lane ; overlap. Lane ; is then marked in green and you hear a tone. A white arrow and white bracket are shown to indicate the target position.
Driving to the final position
: Lane turns green when the steering wheel
is turned in the correct direction
X Keep the steering wheel in that position
and reverse carefully.
X Stop as soon as you hear a tone.
The vehicle has reached the position in which you need to countersteer.
: Lane turns green when the steering wheel
is turned in the correct direction
X Keep the steering wheel turned in that direction and reverse carefully until you have reached the final position. The Parking Guidance finished message appears in the multifunction display and a tone sounds.
Driving systems
319
The rear view camera is located in the handle strip of the trunk lid.
Final position Depending on the size of the parking space, you may now be in an angled position in the parking space. If possible, Parking Guidance will guide you as far back as possible towards the rear limit of the parking space. X Maneuver to the final position if necessary. X Always observe the warning messages
displayed by PARKTRONIC (Y page 313).
Canceling Parking Guidance X Press the PARKTRONIC button on the
dashboard (Y page 314). Parking Guidance is canceled immediately and PARKTRONIC is deactivated.
Parking Guidance is canceled automatically if it is no longer possible to guide you into the parking space, or if a malfunction occurs. The parking space symbol goes out and a warning tone sounds. The Parking Guidance Canceled message appears in the multifunction display.
Rear view camera Important safety notes The rear view camera is an optical parking aid. It shows the area behind your vehicle in the COMAND display. G WARNING Make sure that no persons or animals are in the maneuvering range. Otherwise, they could be injured.
: Rear view camera
View through the camera The area behind the vehicle is displayed as a mirror image, as in the rear view mirror. G WARNING The rear view camera is only an aid and may display obstacles Rfrom a distorted perspective Rinaccurately Rmay not display obstacles at all The rear view camera does not relieve you of the responsibility to be cautious. Take care and pay careful attention. The rear view camera may not show objects which are Rvery close to the rear bumper Runder the rear bumper Rabove the trunk handle You are responsible for safety at all times and must continue to pay attention to the immediate surroundings when parking and maneuvering. This includes the area behind, in front of, and beside the vehicle. Otherwise you could endanger yourself and/or others. G WARNING The rear view camera will not function or will not fully function if:
320 Driving systems
Rthe trunk lid is open Rit is raining or snowing strongly or if it is
foggy
Rit is night or if you are parking/
maneuvering your vehicle in a very dark area
Ra very bright white light is affecting the
camera
Rthe immediate vicinity is illuminated with
fluorescent light (the display of the COMAND system can flicker)
Rtemperature changes abruptly, for example
if you drive out of the cold into a heated garage (condensation on the lens) Rthe camera lens is dirty or covered Rthe rear of your vehicle is damaged
In this case, have the position and the setting of the camera checked at a specialist workshop. Mercedes-Benz recommends that you consult a Mercedes- Benz Center for this purpose.
Do not use the rear view camera in these situations. You could otherwise injure yourself and other people and/or cause damage - including damage to your vehicle - while parking/maneuvering.
Activating the rear view camera X Make sure that the SmartKey is in position
2 in the ignition lock. X Engage reverse gear.
The area behind the vehicle is shown in the COMAND display with guide lines.
Guide lines in the COMAND display G WARNING Use of rear view camera can be dangerous if you are color-blind or have impaired color vision. Only use rear view camera if you can see and distinguish all colored guidelines shown by rear view camera on the COMAND system display.
G WARNING Please note that objects that do not touch the ground may appear to be further away than they actually are, for example: Rthe bumper of a vehicle parked behind you Rthe trailer drawbar Rthe ball coupling of a trailer tow hitch Rthe rear end of a truck Ra slanted post In such cases, you should not use the guide lines to judge the distance. You may misjudge the distance, which increases the risk of impacting the objects. Even if the object you approach is directly on the ground, do not approach the object any closer than the red guide line.
Example: information in the COMAND display Guide lines ; and = show the approximate distance to the rear area. Yellow guide line ; indicates a distance of approximately 3 ft (1 m) and red guide line = indicates a distance of approximately 10 in (0.25 m). The distances only apply to objects that are at ground level. Blue guide lines : depict the width required for the vehicle. They are used to align the vehicle with the edge of the road, e.g. the curb.
Driving systems
321
ATTENTION ASSIST Important safety notes ATTENTION ASSIST helps you during long, monotonous journeys such as on freeways and interstate highways. It is active in the range between 50 mph (80 km/h) and 112 mph (180 km/h). If ATTENTION ASSIST detects typical indicators of fatigue or increasing lapses in concentration on the part of the driver, it suggests you take a break. G WARNING ATTENTION ASSIST is only an aid and may detect your tiredness or lapses in concentration too late or not at all. It is not a substitute for a well-rested and attentive driver. Fatigue may cause you to recognize hazardous situations too late, misjudge a situation or react more slowly. For this reason, make sure you feel rested before you begin driving and during your journey. Make sure that you take regular breaks in time, particularly on long journeys. Otherwise, you may fail to recognize dangers in time, cause an accident and injure yourself and others.
ATTENTION ASSIST assesses your level of fatigue or lapses in concentration by taking the following criteria into account: Ryour personal driving style, e.g. steering
characteristics
Rdriving conditions, e.g. time, driving time The functionality of ATTENTION ASSIST is restricted and warnings may be delayed or not occur at all: Rif the road condition is poor, e.g. if the
surface is uneven or if there are potholes
Rif there is a strong side wind Rif you have adopted a sporty driving style with high cornering speeds or high rates of acceleration
Rif you are predominantly driving slower than 50 mph (80 km/h) or faster than 112 mph (180 km/h)
Rif you are currently using COMAND or
making a telephone call with it
Rif the time has been set incorrectly Rin active driving situations, such as when you change lanes or change your speed
Warning and display messages in the multifunction display
X Activate ATTENTION ASSIST using the on-
board computer (Y page 348). Symbol : appears in the multifunction display.
If ATTENTION ASSIST is active, you will be warned no sooner than 20 minutes after your journey has begun. You will then hear an intermittent warning tone twice, and the Attention Assist: Drowsiness Detected message appears in the multifunction display. X If necessary, take a break. X Press a to confirm the message. On long journeys, take regular breaks in good time to allow yourself to rest properly. If you do not take a break, you will be warned again after 15 minutes at the earliest. The precondition for this is that ATTENTION ASSIST still detects typical indicators of fatigue or increasing lapses in concentration.
322 Driving systems
ATTENTION ASSIST is reset when you continue your journey and starts assessing your tiredness again if: Ryou switch off the engine. Ryou take off your seat belt and open the
driver's door, e.g. for a change of drivers or to take a break.
Night View Assist Plus with spotlight function Important safety notes In addition to the illumination provided by the normal headlamps, Night View Assist Plus uses infrared light to illuminate the road. The Night View Assist Plus camera picks up the infrared light and shows a black-and-white image in the multifunction display. The image shown in the multifunction display corresponds to a road lit up by high-beam headlamps. This enables you to see the road's course and any obstacles in good time. If pedestrian recognition is activated, pedestrians recognized by the system are highlighted in the Night View Assist Plus display. The spotlight function also illuminates individual detected pedestrians with a spotlight that flashes four times in quick succession. After this targeted illumination, the headlamps return to the original driving position again. G WARNING Night View Assist Plus is only an aid designed to assist driving. It is not a substitute for attentive driving. Do not rely solely on the Night View Assist Plus display. Continue to look through the windshield. You are responsible for safety and must drive in accordance with traffic conditions. You could otherwise put yourself and others in danger.
The system may be impaired or unavailable if: Rthere is poor visibility, e.g. due to snow,
rain, fog or heavy spray.
Rthe windshield is dirty, fogged up or
covered, for instance by a sticker, in the vicinity of the camera.
Ryou are driving on bends, uphill gradients
or downhill gradients.
Light from the headlamps of oncoming vehicles does not affect the Night View Assist Plus display in the multifunction display. This is also the case if you cannot switch on the high-beam headlamps due to oncoming traffic. G WARNING The Night View Assist Plus cannot record objects immediately in front of or next to the vehicle. When maneuvering, continue to look through the windshield. Make sure no persons or animals are in the area in which you are maneuvering. You could otherwise injure them.
i Infrared light is not visible to the human
eye and therefore does not glare. Night View Assist Plus can therefore remain switched on even if there is oncoming traffic.
: Night View Assist Plus camera
Pedestrian recognition G WARNING Pedestrian recognition may be impaired or inoperative if: Rpedestrians are partially or entirely
obscured by objects, e.g. parked vehicles. Rthe silhouette of the pedestrian in the Night
View Assist Plus display is incomplete or interrupted, e.g. by powerful light reflections.
Rpedestrians do not contrast with the
surroundings.
Rpedestrians are not standing upright, for example, if they are sitting, crouching or lying down.
i Animals are not recognized by pedestrian
recognition.
Night View Assist Plus is able to recognize pedestrians by typical characteristics, e.g. a silhouette in the shape of a person. Pedestrian recognition is then switched on automatically if: RNight View Assist Plus is activated. Ryou are driving faster than 6 mph
(10 km/h).
Rthe surroundings are dark, e.g. when driving outside built-up areas without street lighting.
If pedestrian recognition is active, the symbol for active pedestrian recognition (Y page 325) appears in the multifunction display. If a pedestrian is now recognized, they are framed and thereby highlighted. If the pedestrian recognition system has brought a pedestrian to your attention, look through the windshield to evaluate the situation. The actual distance to objects and pedestrians cannot be gauged accurately by looking at a screen. It may be the case that objects are highlighted as well as pedestrians.
Driving systems
323
Spotlight function Pedestrian recognition with spotlight function is activated automatically if: RNight View Assist Plus with spotlight
function is activated.
Ryou are driving faster than 28 mph
(45 km/h).
Rthe surroundings are dark, e.g. when driving outside built-up areas without street lighting.
Only one person or object can be illuminated