2012 Mercedes-benz CL Class Owners Manual

467

i Not all wheel and tire combinations are available from the factory for all countries.

For further information on the recommended tire inflation pressure and on tire pressures for specific driving conditions, see (Y page 445). i Notes on the vehicle equipment – always

equip the vehicle: Rwith tires of the same size on a given axle

(left/right)

Rwith the same type of tires at a given time (summer tires, winter tires, MOExtended tires)

i On the following pages, you can find

information on approved wheel rims and tire sizes for equipping your vehicle with winter tires. Winter tires are not available ex factory as standard equipment or optional extras. If you want to equip your vehicle with approved winter tires, it may be necessary to obtain wheel rims in the corresponding size, as the size of the approved winter tires may differ from the standard tires. This is dependent on the model and the equipment installed at the factory. The tires and wheel rims, as well as further information, can be obtained at a qualified specialist workshop, e.g. at an authorized Mercedes-Benz Center.

i Overview of abbreviations used in the

following tire tables: RBA: both axles RFA: front axle RRA: rear axle

In the following table, the wheel/tire combinations are allocated to the vehicle models through variants, e.g. V1, V2 etc.:

V1 CL 550 4MATIC25
V2 CL 600
V3 CL 63 AMG V4 CL 65 AMG

25 BlueEFFICIENCY

468 Wheel and tire combinations

Tires

BA

FA

RA

BA

FA

RA

FA

RA

BA

FA

RA

BA

FA

RA

Summer tires 255/45 R18 99 Y MOExtended26
255/45 R18 99 Y MOExtended26

275/45 R18 103 Y MOExtended26, 27

255/40 R19 100 Y XL

255/40 R19 100 Y XL

275/40 R19 101 Y27

255/40 ZR 19 XL

275/40 ZR 19 XL27

255/35 ZR 20 XL27

255/35 ZR 20 XL

275/35 ZR 20 XL27

All-weather tires 255/45 R18 99 H M+S

255/45 R18 99 H M+S

275/45 R18 103 H M+S27

Alloy wheels 8.5 J x 18 H2
Wheel offset: 1.69 in (43 mm) 8.5 J x 18 H2
Wheel offset: 1.69 in (43 mm)

9.5 J x 18 H2
Wheel offset: 1.69 in (43 mm) 8.5 J x 19 H2
Wheel offset: 1.69 in (43 mm) 8.5 J x 19 H2
Wheel offset: 1.69 in (43 mm) 9.5 J x 19 H2
Wheel offset: 1.69 in (43 mm) 8.5 J x 19 H2
Wheel offset: 1.69 in (43 mm) 9.5 J x 19 H2
Wheel offset: 1.69 in (43 mm) 8.5 J x 20 H2
Wheel offset: 1.69 in (43 mm) 8.5 J x 20 H2
Wheel offset: 1.69 in (43 mm) 9.5 J x 20 H2
Wheel offset: 1.69 in (43 mm)

Alloy wheels 8.5 J x 18 H2
Wheel offset: 1.69 in (43 mm) 8.5 J x 18 H2
Wheel offset: 1.69 in (43 mm) 9.5 J x 18 H2
Wheel offset: 1.69 in (43 mm)

V1 V2 V3 V4
—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

V1 V2 V3 V4
—

—

—

—

—

26 MOExtended tires (tires featuring run-flat characteristics) only in combination with an activated tire pressure

monitor.

27 Use of snow chains is not permitted. Observe the notes in the "Snow chains" section.

Wheel and tire combinations

469

BA

FA

RA

BA

BA

FA

RA

All-weather tires 255/40 R19 100 V XL M+S

255/40 R19 100 V XL M+S

275/40 R19 101 V M+S27

Alloy wheels 8.5 J x 19 H2
Wheel offset: 1.69 in (43 mm) 8.5 J x 19 H2
Wheel offset: 1.69 in (43 mm) 9.5 J x 19 H2
Wheel offset: 1.69 in (43 mm)

Alloy wheels Winter tires 255/45 R18 99 V M+Si 8.5 J x 18 H2

255/40 R19 100 V XL M+Si

255/40 R19 100 V XL M+Si

275/40 R19 105 V XL M+Si27

Wheel offset: 1.69 in (43 mm) 8.5 J x 19 H2
Wheel offset: 1.69 in (43 mm) 8.5 J x 19 H2
Wheel offset: 1.69 in (43 mm)

9.5 J x 19 H2
Wheel offset: 1.69 in (43 mm)

V1 V2 V3 V4
—

—

—

—

—

V1 V2 V3 V4
—

—

—

—

"Minispare" emergency spare wheel27
Tires T 155/70 R19 113 M Tire pressure: 420 kPa (4.2 bar/ 61 psi)

Wheels 4.5 B x 19 H2
Wheel offset: 1.38 in (35 mm)

V1 V2 V3 V4

i The specified tire pressure is printed in yellow on the emergency/collapsible spare wheel.

27 Use of snow chains is not permitted. Observe the notes in the "Snow chains" section.

470

Useful information ............................ 472
Notes on technical data ................... 472
Genuine Mercedes-Benz parts ......... 472
Warranty ............................................ 473
Identification plates ......................... 473
Service products and capacities ..... 475
Vehicle data ...................................... 480

471

472 Genuine Mercedes-Benz parts

Useful information

i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safety- related systems and functions.

i Please read the information on qualified

specialist workshops (Y page 29).

Notes on technical data

i The data stated here specifically refers to a vehicle with standard equipment. Consult an authorized Mercedes-Benz Center for the data for all vehicle variants and trim levels.

Genuine Mercedes-Benz parts

All Mercedes-Benz Centers maintain a supply of genuine Mercedes-Benz parts for necessary service and repair work. In addition, strategically located parts delivery centers provide for quick and reliable parts service. There are more than 300,000 different genuine Mercedes-Benz parts available for Mercedes-Benz models. Genuine Mercedes-Benz parts are subject to strict quality control. Each part has been specially developed, manufactured or selected for Mercedes-Benz vehicles and fine-tuned for them. Therefore, only genuine Mercedes-Benz parts should be used.

G WARNING Driving safety may be impaired if non- approved parts, tires and wheels or safety- relevant accessories are used. This could lead to malfunctions in safety- relevant systems, e.g. the brake system. This could cause you to lose control of your vehicle and cause an accident. For this reason, Mercedes-Benz recommends that you use genuine Mercedes-Benz parts or parts of equal quality. Only use tires, wheels and accessories that have been specifically approved for your vehicle.

! Air bags and Emergency Tensioning Devices, as well as control units and sensors for these restraint systems may be installed in the following areas of your vehicle: Rdoors Rdoor pillars Rdoor sills Rseats Rdashboard Rinstrument cluster Rcenter console Do not install accessories such as audio systems in these areas. Do not carry out repairs or welding. You could impair the operating efficiency of the restraint systems. Have aftermarket accessories installed at a qualified specialist workshop. Mercedes- Benz recommends that you use an authorized Mercedes-Benz Center for this purpose. H Environmental note Daimler AG also supplies reconditioned major assemblies and parts which are of the same quality as new parts. They are covered by the same Limited Warranty entitlements as new parts.

Always specify the vehicle identification number (VIN) (Y page 473) and the engine

number (Y page 474) when ordering genuine Mercedes-Benz parts.

Warranty

The Service and Warranty Information booklet contains detailed information about the warranties covering your vehicle. Your authorized Mercedes-Benz Center will exchange or repair any defective parts originally installed in the vehicle in accordance with the terms of the following warranties: RNew Vehicle Limited Warranty REmission System Warranty REmission Performance Warranty RCalifornia, Connecticut, Maine,

Massachusetts, New York, Pennsylvania, Rhode Island and Vermont Emission Control Systems Warranty

RState Warranty Enforcement Laws (Lemon

Laws)

Replacement parts and accessories are covered by the Mercedes-Benz Parts and Accessories warranties. You can obtain information about this from any authorized Mercedes-Benz Center. i Should you lose your Service and

Warranty Information booklet, have an authorized Mercedes-Benz Center arrange for a replacement. It will be mailed to you.

Identification plates

473

Identification plates Vehicle identification plate with vehicle identification number (VIN) and paint code number

X Open the driver's door.

You will see vehicle identification plate :.

Example: vehicle identification plate (USA only) ; VIN = Paint code

Example: vehicle identification plate (Canada only) ; VIN = Paint code

474

Identification plates

i The data shown on the identification plate is example data. This data is different for every vehicle and can deviate from the data shown here. You can find the data applicable to your vehicle on the vehicle's identification plate.

Vehicle identification number (VIN) The vehicle identification number (VIN) can be found in the following locations: Ron the vehicle identification plate

Rat the lower edge of the windshield

(Y page 473)

(Y page 474)

In addition to being stamped on the vehicle identification plate, the vehicle identification number (VIN) is also stamped onto the vehicle body. It is under the trim behind the rear seat armrest.

(AMG vehicles) : Emission control information plate,

including the certification of both federal and Californian emissions standards

; Engine number (stamped into the

crankcase)

= VIN (on the lower edge of the windshield)

X Fold down the rear seat armrest. X Open the trim.

You will see vehicle identification number (VIN) :.

Engine number

: Engine number (stamped into the

crankcase)

; VIN (on the lower edge of the windshield) = Emission control information plate,

including the certification of both federal and Californian emissions standards

Service products and capacities Important safety notes Service products include the following: Rfuels Rlubricants (e.g. engine oil, transmission oil) Rcoolant Rbrake fluid Rwindshield washer fluid Vehicle components and their respective lubricants must match. You should therefore only use products that have been tested and approved by Mercedes-Benz. Information on tested and approved products can be obtained at a Mercedes-Benz Center or on the Internet at http:// www.mbusa.com (USA only). G WARNING Comply with all valid regulations with respect to handling, storing and disposing of service fluids. Otherwise, you could endanger persons or the environment. Keep service fluids out of the reach of children. For health reasons, you should prevent service fluids from coming into direct contact with your skin or clothing. If a service fluid is swallowed, contact a physician immediately.

Service products and capacities

475

476 Service products and capacities

Capacities

Engine oil and filter

Model

Capacity

CL 550 4MATIC28
CL 63 AMG CL 600
CL 65 AMG

9.0 US qt (8.5 l)

9.5 US qt (9.0 l)

Cooling system CL 550 4MATIC28

CL 600

CL 63 AMG

CL 65 AMG

CL 550 4MATIC28
CL 600
CL 63 AMG CL 65 AMG All models except AMG vehicles AMG vehicles All models

Tank capacity

Reserve

Windshield/ headlamp cleaning system

Approximately 14.5 US qt (13.7 l) Approximately 15.3 US qt (14.5 l) Approximately 12.2 US qt (11.5 l) Approximately 14.7 US qt (13.9 l) 21.9 US gal (83.0 l) 23.8 US gal (90.0 l)

2.9 US gal (11.0 l)

3.7 US gal (14.0 l) 6.9 US qt (6.5 l)

Fuel, coolant, lubricants, etc. Approved engine oils

MB 325.0 or MB 326.0
anticorrosion/ antifreeze

Premium-grade unleaded gasoline (at least 91 octane, average value between 96 RON/ 86 MON)

MB windshield washer concentrate29
(Y page 480) Mixing ratio for washer fluid (Y page 480)

28 BlueEFFICIENCY 29 Mixed with water or premixed washer fluid with antifreeze protection.

Fuel Important safety notes G WARNING Gasoline is highly flammable and poisonous. It burns violently and can cause serious personal injury. Never allow sparks, flames or smoking materials near gasoline. Turn off the engine before refueling. Whenever you are around gasoline, avoid inhaling fumes and any skin or clothing contact. Direct skin contact with fuels and the inhalation of fuel vapors are damaging to your health.

Premium-grade unleaded gasoline ! To ensure the longevity and full

performance of the engine, only premium- grade unleaded gasoline may be used. If there is no premium-grade unleaded gasoline available and regular-grade unleaded gasoline may be used; please observe the following precautions: Ronly fill the fuel tank to half full with

regular-grade unleaded gasoline and fill the rest with premium-grade unleaded gasoline as soon as possible.

Rdo not drive at the maximum speed. Ravoid sudden acceleration. Rif the vehicle is carrying a light load, e.g. two passengers without luggage, do not allow the engine to rev above 3,000 rpm.

Rif the vehicle is fully loaded or is being

operated in mountainous terrain, do not depress the accelerator pedal further than Ô of the pedal travel.

Fuel requirements Use only premium-grade unleaded gasoline. The octane number should be at least 91.

Service products and capacities

477

Details can be found on the gas pump. The octane number is the average value of the Research Octane Number (RON) and the Motor Octane Number (MON): (RON + MON) / 2, also known as knock resistance. Reformulated Gasoline (RFG) and/or unleaded gasoline with additives can be used if the concentration of the additives in the fuel does not exceed 10%, e.g.: REthanol RTAME RETBE RIPA RTBA For MTBE, the concentration should not exceed 15%. The concentration of methanol in gasoline including other additives must not exceed 3%. Using mixtures of methanol and ethanol is not permitted. Gasohol, a mixture of 10% ethanol and 90% unleaded gasoline, can be used. All of these mix fuels must fulfill the fuel requirements, e.g.: Rknock resistance Rboiling point Rvapor pressure

Additives in gasoline One of the main problems of poor fuel quality is the forming of deposits that are caused during the gasoline combustion process. Mercedes-Benz recommends that you use fuel brands that have the additives. If you use fuels without these additives for an extended period of time, there may be a buildup of carbon deposits, especially on the inlet valves and in the combustion chamber. This could lead to engine problems, e.g.: Rlonger engine warm-up phase Runeven idle Rengine noise Rmisfiring Rloss of power

478 Service products and capacities

Carbon deposits may form if the availability of gasoline with relevant additives is insufficient (in certain regions). In this case, Mercedes-Benz recommends the use of additives that have been approved for Mercedes-Benz vehicles. Consult an authorized Mercedes-Benz Center or go to the Internet site http://www.mbusa.com (USA only) for a list of approved products. Observe the instructions for use on the product label. Do not mix other fuel additives with fuel. This causes unnecessary costs and could damage the engine. ! Do not refuel with low-grade fuel and do not use fuel additives that are not tested and approved for Mercedes-Benz vehicles. Damage to or malfunctions of the fuel system may otherwise occur.

Engine oil Please bear the following in mind The engine oils are matched to the performance of Mercedes-Benz engines and service intervals. You should therefore only use engine oils and oil filters that are approved for vehicles with maintenance systems. For a list of approved engine oils and oil filters, consult an authorized Mercedes-Benz Center or go to the Internet site http://www.mbusa.com (USA only). ! Never use engine oil or an oil filter of a specification other than is necessary to fulfill the prescribed service intervals. Do not change the engine oil or oil filter in order to achieve longer replacement intervals than those prescribed. You could otherwise cause engine damage or damage to the exhaust gas aftertreatment.

Follow the instructions in the service interval display regarding the oil change. Otherwise, you may damage the engine and the exhaust gas aftertreatment.

The table shows which engine oils have been approved for your vehicle. Model

Engine model 278

MB Approval 229.5

CL 550 4MATIC30
CL 600
CL 63 AMG CL 65 AMG

275
157
275

229.531

i MB approval is indicated on the oil

containers.

Additives ! Do not use any additives in the engine oil.

This could damage the engine.

Engine oil viscosity Viscosity describes the flow characteristics of a fluid. If an engine oil has a high viscosity, this means that it is thick; a low viscosity means that it is thin. Select an engine oil with an SAE (viscosity) classification suitable for the prevailing outside temperatures. The following table shows the correct SAE classification to be used. The low-temperature characteristics of engine oils can deteriorate significantly, e.g. as a result of aging, soot and fuel deposits. It is therefore strongly recommended that you carry out regular oil changes using an approved engine oil with the appropriate SAE classification.

30 BlueEFFICIENCY 31 Restriction: only SAE 0W-40 or SAE 5W-40 engine oils may be used.

Service products and capacities

479

Coolant Important safety notes The coolant is a mixture of water and antifreeze/corrosion inhibitor. It performs the following tasks: Rcorrosion protection Rantifreeze protection Rraising the boiling point The engine cooling system is filled at the factory with coolant that contains an antifreeze/corrosion inhibitor that ensures protection down to approximately -35 ‡ (-37 †). ! Only add coolant that has been premixed

with the desired antifreeze protection. Otherwise, the engine could be damaged. Further information on coolants and on filling can be found in the Mercedes-Benz Specifications for Service Products, MB Approval 310.1, e.g. on the Internet at http://bevo.mercedes-benz.com. You can also consult an authorized Mercedes-Benz Center.

! Always use a suitable coolant mixture,

even in countries where high temperatures prevail. Otherwise, the engine cooling system is not sufficiently protected from corrosion and overheating.

If the coolant has antifreeze protection down to -35 ‡ (-37 †), the boiling point of the coolant under operating conditions is approximately 266 ‡ (130 †). Your vehicle has a range of aluminum components. Aluminum components in the engine make it necessary to use antifreeze/ corrosion inhibitor coolant that has been specifically formulated to protect the aluminum parts. Using other antifreeze/ corrosion inhibitors without these characteristics affects the service life. The coolant must be used throughout the year in order to maintain the necessary corrosion

Refrigerant of the air-conditioning system The air-conditioning system is filled with R134a refrigerant and a special PAG lubricant. ! Never use refrigerant R 12 (CFC) or

mineral lubricants. Otherwise, you could damage the air-conditioning system.

Brake fluid G WARNING Over a period of time, the brake fluid absorbs moisture from the air; this lowers its boiling point. If the boiling point of the brake fluid is too low, vapor pockets may form in the brake system when the brakes are applied hard (e.g. when driving downhill). This would impair braking efficiency. You should have the brake fluid renewed at regular intervals. The brake fluid change intervals can be found in the Service Booklet.

Only use brake fluid approved by Mercedes- Benz. Information about approved brake fluids can be obtained from any authorized Mercedes-Benz Center or on the Internet at http://bevo.mercedes-benz.com.

480 Vehicle data

protection and to provide protection from overheating. In the Service Booklet, you can find information on the intervals for renewal. The renewal interval is determined by the coolant type and the engine cooling system design. The renewal interval in the Service Booklet is only valid if the coolant is renewed or filled up with Mercedes-Benz approved products. Therefore, only use MB 325.0 or 326.0 anticorrosion/antifreeze or another Mercedes-Benz approved product of the same specification. Information on other products with the same specifications that are approved by Mercedes-Benz can be obtained at an authorized Mercedes-Benz Center or on the Internet at http://bevo.mercedes-benz.com. The coolant is checked at every maintenance interval at an authorized Mercedes-Benz Center. The antifreeze/corrosion inhibitor concentration in the engine cooling system should: Rbe at least 50%. This will protect the engine

cooling system against freezing down to approximately -35 ‡ (-37 † ).

Rnot exceed 55% (antifreeze protection to -49 ‡ [-45 † ]); otherwise, heat will not dissipate as effectively.

If the coolant level is too low, MB 325.0 or 326.0 anticorrosion/antifreeze should be added. Have the engine cooling system checked for possible leaks.

Windshield/headlamp cleaning system G WARNING Washer solvent/antifreeze is highly flammable. Do not spill washer solvent/ antifreeze on hot engine parts, because it may ignite and burn. You could be seriously burned.

Use MB SummerFit windshield washer concentrate at temperatures above freezing: X Mix 1 part MB SummerFit with 100 parts

water.

Use MB WinterFit windshield washer concentrate at temperatures below freezing: X At temperatures down to 14 ‡(Ò 10 †): mix

1 part MB WinterFit with 2 parts water.

X At temperatures down to Ò 4 ‡(Ò 20 †): mix

1 part MB WinterFit with 1 part water.

X At temperatures down to

Ò 20.2 ‡(Ò 29 †): mix 2 parts MB WinterFit with 1 part water.

! Only SummerFit and WinterFit can be

mixed. Otherwise, the jets could become blocked.

Vehicle data

For the specified vehicle data, please note that: RThe heights specified may vary due to:

tires load

- condition of the suspension - optional equipment All models Vehicle length Vehicle width including exterior mirrors Vehicle height Wheelbase Front track Rear track Turning circle Maximum trunk load

200.8 in (5099 mm) 83.9 in (2130 mm)

55.9 in (1419 mm) 116.3 in (2955 mm) 63.0 in (1601 mm) 63.3 in (1607 mm) 38.2 ft (11.63 m) Maximum 220 lb

(100 kg)

Vehicle data 481

CL 63 AMG Vehicle length Vehicle height Turning circle

CL 65 AMG Vehicle length Vehicle height Turning circle

201.0 in (5106 mm) 56.1 in (1425 mm) 38.1 ft (11.60 m)

201.0 in (5106 mm) 56.2 in (1428 mm) 38.1 ft (11.60 m)

482

483

484

Publication details Internet

Further information about Mercedes-Benz vehicles and about Daimler AG can be found on the following websites: http://www.mbusa.com (USA only) http://www.mercedes-benz.ca (Canada only)

Editorial office

Not to be reprinted, translated or otherwise reproduced, in whole or in part, without the written permission of Daimler AG.

As at 16.02.2011

É21658409822ËÍ 2165840982

Order no. 6515 2367 13 Part no. 216 584 09 82 Edition A 2012