2013 Jeep Patriot Owners Manual

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87

WARNING!

Never use the same lower anchorage to attach more than one child restraint. If you are installing LATCH- compatible child restraints next to each other, you must use the seat belt for the center position. You can then use either the LATCH anchors or the vehicle’s seat belt for installing child seats in the outboard positions. Please refer to “Installing The LATCH- Compatible Child Restraint System” for typical in- stallation instructions.

Always follow the directions of the child restraint manu- facturer when installing your child restraint. Not all child restraint systems will be installed as described here.

88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Install A LATCH-compatible Child Restraint 1. If the selected seating position has a Switchable Auto- matic Locking Retractor (ALR) seat belt, stow the seat belt, following the instructions below. See the section “Installing Child Restraints Using the Vehicle Seat Belt” to check what type of seat belt each seating position has.

4. Attach the lower hooks or connectors of the child restraint to the lower anchorages in the selected seat- ing position.

5. If the child restraint has a tether strap, connect it to the top tether anchorage. See the section “Installing Child Restraints Using the Top Tether Anchorage” for direc- tions to attach a tether anchor.

2. Loosen the adjusters on the lower straps and on the tether strap of the child seat so that you can more easily attach the hooks or connectors to the vehicle anchorages.

6. Tighten all of the straps as you push the child restraint rearward and downward into the seat. Remove slack in the straps according to the child restraint manufac- turer’s instructions.

3. Place the child seat between the lower anchorages for that seating position. For some second row seats, you may need to recline the seat and / or raise the head restraint to get a better fit.

7. Test that the child restraint is installed tightly by pulling back and forth on the child seat at the belt path. It should not move more than 1 inch (25.4 mm) in any direction.

How To Stow An Unused ALR Seatbelt When using the LATCH attaching system to install a child restraint, stow all ALR seat belts that are not being used by other occupants or being used to secure child restraints. An unused belt could injure a child if they play with it and accidentally lock the seatbelt retractor. Before installing a child restraint using the LATCH system, buckle the seat belt behind the child restraint and out of the child’s reach. If the buckled seat belt interferes with the child restraint installation, instead of buckling it behind the child restraint, route the seat belt through the child restraint belt path and then buckle it. Do not lock the seatbelt. Remind all children in the vehicle that the seat belts are not toys and that they should not play with them.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89

WARNING!

Improper installation of a child restraint to the LATCH anchorages can lead to failure of the re- straint. The child could be badly injured or killed. Follow the child restraint manufacturer’s directions exactly when installing an infant or child restraint.

Installing Child Restraints Using The Vehicle Seat Belt The seat belts in the passenger seating positions are equipped with either a Switchable Automatic Locking Retractor (ALR) or a cinching latch plate or both. Both types of seat belts are designed to keep the lap portion of the seat belt tight around the child restraint so that it is not necessary to use a locking clip. The ALR retractor can be “switched” into a locked mode by pulling all of the

Lap/Shoulder Belt Systems for Installing Child Restraints in this Vehicle

90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE webbing out of the retractor and then letting the webbing retract back into the retractor. If it is locked, the ALR will make a clicking noise while the webbing is pulled back into the retractor. For additional information on ALR, refer to the “Automatic Locking Mode” description un- der “Occupant Restraints.” The cinching latch plate is designed to hold the lap portion of the seatbelt tight when webbing is pulled tight and straight through a child restraint’s belt path. Please see the table below and the following sections for more information about both types of seat belts.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91

limit

is the weight

What (child’s weight + weight of the child restraint) for using the Tether Anchor with the seat belt to attach a forward facing child restraint? Can the rear-facing child restraint touch the back of the front passenger seat?

Weight limit of the Child Restraint

Yes

Can the head restraints be removed? No Yes Can the buckle stalk be twisted to tighten the seat belt against the belt path of the child restraint?

Always use the tether anchor when using the seat belt to install a for- ward facing child restraint, up to the recommended weight limit of the child restraint. Contact between the front passenger seat and the child restraint is al- lowed, if the child restraint manu- facturer also allows contact.

In positions with cinching latch plates (CINCH), the buckle stalk may be twisted up to 3 full turns. Do not twist the buckle stalk in a seating position with an ALR retractor.

92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing A Child Restraint with a Switchable Automatic Locking Retractor (ALR) 1. Place the child seat

in the center of the seating position. For some second row seats, you may need to recline the seat and/or raise the head restraint to get a better fit.

2. Pull enough of the seat belt webbing from the retractor to pass it through the belt path of the child restraint. Do not twist the belt webbing in the belt path.

3. Slide the latch plate into the buckle until you hear a

“click.”

4. Pull on the webbing to make the lap portion tight

against the child seat.

5. To lock the seat belt, pull down on the shoulder part of the belt until you have pulled all the seat belt webbing out of the retractor. Then, allow the webbing to retract back into the retractor. As the webbing retracts, you will hear a clicking sound. This means the seat belt is now in the Automatic Locking mode.

6. Try to pull the webbing out of the retractor. If it is locked, you should not be able to pull out any web- bing. If the retractor is not locked, repeat step 5.

7. Finally, pull up on any excess webbing to tighten the lap portion around the child restraint while you push the child restraint rearward and downward into the vehicle seat.

8. If the child restraint has a top tether strap and the seating position has a top tether anchorage, connect the tether strap to the anchorage and tighten the tether strap. Refer to “Lower Anchors and Tethers for Chil- dren (LATCH) Restraint System” for directions to attach a tether anchor.

9. Test that the child restraint is installed tightly by pulling back and forth on the child seat at the belt path. It should not move more than 1 inch (25.4 mm) in any direction.

Any seat belt system will loosen with time, so check the belt occasionally, and pull it tight if necessary.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93

Installing A Child Restraint With A Cinching Latch Plate (CINCH) — If Equipped 1. Place the child seat

in the center of the seating position. For some second row seats, you may need to recline the seat and / or raise the head restraint to get a better fit.

2. Next, pull enough of the seat belt webbing from the retractor to pass it through the belt path of the child restraint. Do not twist the belt webbing in the belt path.

3. Slide the latch plate into the buckle until you hear a

“click.”

4. Finally, pull up on any excess webbing to tighten the lap portion around the child restraint while you push the child restraint rearward and downward into the vehicle seat.

94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 5. If the child restraint has a top tether strap and the seating position has a top tether anchorage, connect the tether strap to the anchorage and tighten the tether strap. Refer to “Lower Anchors and Tethers for Chil- dren (LATCH) Restraint System” for directions to attach a tether anchor.

6. Test that the child restraint is installed tightly by pulling back and forth on the child seat at the belt path. It should not move more than 1 inch (25.4 mm) in any direction.

Any seat belt system will loosen with time, so check the belt occasionally, and pull it tight if necessary. If the buckle or the cinching latch plate is too close to the belt path opening of the child restraint, you may have trouble tightening the seat belt. If this happens, discon- nect the latch plate from the buckle and twist the short buckle-end belt up to three full turns to shorten it. Insert the latch plate into the buckle with the release button

facing out, away from the child restraint. Repeat steps 4
to 6, above, to complete the installation of the child restraint. If the belt still cannot be tightened after you shorten the buckle, disconnect the latch plate from the buckle, turn the buckle around one half turn, and insert the latch plate into the buckle again. If you still cannot make the child restraint installation tight, try a different seating position. Installing Child Restraints Using The Top Tether Anchorage 1. Look behind the seating position where you plan to install the child restraint to find the tether anchorage. You may need to move the seat forward to provide better access to the tether anchorage. If there is no top tether anchorage for that seating position (see the charts above), move the child restraint to another position in the vehicle if one is available.

2. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat, routing it over the center of the head restraint.

3. Attach the tether strap hook of the child restraint to

the top tether anchorage as shown in the diagram.

Tether Anchorage Locations

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95
4. Remove slack in the tether strap according to the child

restraint manufacturer’s instructions.

WARNING!

An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchorage position directly be- hind the child seat to secure a child restraint top tether strap. If your vehicle is equipped with a split rear seat, make sure the tether strap does not slip into the opening between the seatbacks as you remove slack in the strap.

Transporting Pets Air Bags deploying in the front seat could harm your pet. An unrestrained pet will be thrown about and possibly injured, or injure a passenger during panic braking or in a collision.

96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Pets should be restrained in the rear seat in pet harnesses or pet carriers that are secured by seat belts.

ENGINE BREAK-IN RECOMMENDATIONS A long break-in period is not required for the engine and drivetrain (transmission and axle) in your vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable. While cruising, brief full-throttle acceleration within the limits of local traffic laws contributes to a good break-in. Wide-open throttle acceleration in low gear can be detri- mental and should be avoided. The engine oil installed in the engine at the factory is a high-quality energy conserving type lubricant. Oil changes should be consistent with anticipated climate conditions

under which vehicle operations will occur. For the recom- mended viscosity and quality grades, refer to “Mainte- nance Procedures” in “Maintaining Your Vehicle”.

CAUTION!

Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result.

NOTE: A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered a normal part of the break-in and not interpreted as an indication of difficulty.

SAFETY TIPS

Transporting Passengers NEVER TRANSPORT PASSENGERS IN THE CARGO AREA.

WARNING!

• Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat and using a seat belt properly.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97

Exhaust Gas

WARNING!

Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing (CO), follow these safety tips: • Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicle in or out of the area. • If you are required to drive with the trunk/liftgate open, make sure that all windows are closed and the climate control BLOWER switch is set at high speed. DO NOT use the recirculation mode.

(Continued)

98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

WARNING! (Continued)

• If it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling controls to force outside air into the vehicle. Set the blower at high speed.

The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged, have a competent mechanic inspect the com- plete exhaust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into the passenger compartment. In addition, inspect the exhaust system each time the vehicle is raised for lubrication or oil change. Replace as required.

Safety Checks You Should Make Inside The Vehicle

Seat Belts Inspect the belt system periodically, checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system. Front seat belt assemblies must be replaced after a collision. Rear seat belt assemblies must be replaced after a collision if they have been damaged (i.e., bent retractor, torn webbing, etc.). If there is any question regarding belt or retractor condition, replace the belt. Air Bag Warning Light

The light should come on and remain on for four to eight seconds as a bulb check when the ignition switch is first turned ON. If the light is not lit during starting, see your authorized

dealer. If the light stays on, flickers, or comes on while driving, have the system checked by an authorized dealer. Defroster Check operation by selecting the defrost mode and place the blower control on high speed. You should be able to feel the air directed against the windshield. See your authorized dealer for service if your defroster is inoper- able. Floor Mat Safety Information Always use floor mats designed to fit the footwell of your vehicle. Use only floor mats that leave the pedal area unobstructed and that are firmly secured so that they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in other ways.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99

WARNING!

Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious per- sonal injury. • Always make sure that floor mats are properly attached to the floor mat fasteners. • Never place or install floor mats or other floor coverings in the vehicle that cannot be properly secured to prevent them from moving and interfer- ing with the pedals or the ability to control the vehicle. • Never put floor mats or other floor coverings on top of already installed floor mats. Additional floor mats and other coverings will reduce the size of the pedal area and interfere with the pedals.

(Continued)

100 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

WARNING! (Continued)

• Check mounting of mats on a regular basis. Always properly reinstall and secure floor mats that have been removed for cleaning. • Always make sure that objects cannot fall into the driver footwell while the vehicle is moving. Objects can become trapped under the brake pedal and accelerator pedal causing a loss of vehicle control. • If required, mounting posts must be properly in- stalled, if not equipped from the factory.

Failure to properly follow floor mat installation or mounting can cause interference with the brake pedal and accelerator pedal operation causing loss of control of the vehicle.

Periodic Safety Checks You Should Make Outside The Vehicle

Tires Examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts and cracks. Inspect sidewalls for cuts, cracks and bulges. Check the wheel nuts for tightness. Check the tires (including spare) for proper cold inflation pressure. Lights Have someone observe the operation of brake lights and exterior lights while you work the controls. Check turn signal and high beam indicator lights on the instrument panel.

Door Latches Check for positive closing, latching, and locking. Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks. Also, if gasoline fumes are detected or if fuel, power steering fluid, or brake fluid leaks are suspected, the cause should be located and corrected immediately.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 101

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

CONTENTS 䡵 MIRRORS . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
▫ Inside Day/Night Mirror . . . . . . . . . . . . . . ..107
▫ Automatic Dimming Mirror — If Equipped . . .108
▫ Outside Mirror — Driver Side . . . . . . . . . . ..109
▫ Outside Mirror — Passenger Side . . . . . . . . ..109
▫ Folding Outside Mirrors . . . . . . . . . . . . . . ..109
▫ Power Mirrors . . . . . . . . . . . . . . . . . . . . . . .109
▫ Heated Mirrors — If Equipped . . . . . . . . . . . .110
▫ Vanity Mirrors — If Equipped . . . . . . . . . . . .110
▫ Sun Visor Sliding Feature . . . . . . . . . . . . . . . .111

䡵 Uconnect威 Phone — IF EQUIPPED . . . . . . . . . .111
▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . . .113
▫ Phone Call Features . . . . . . . . . . . . . . . . . . ..120
▫ Uconnect威 Phone Features . . . . . . . . . . . . . ..123
▫ Advanced Phone Connectivity . . . . . . . . . . ..128
▫ Things You Should Know About Your

Uconnect威 Phone. . . . . . . . . . . . . . . . . . . . . .130
▫ General Information . . . . . . . . . . . . . . . . . ..141
䡵 VOICE COMMAND — IF EQUIPPED . . . . . ..141
▫ Voice Command System Operation . . . . . . . ..141

104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

▫ Commands . . . . . . . . . . . . . . . . . . . . . . . . . .143
▫ Voice Training . . . . . . . . . . . . . . . . . . . . . . . .146
䡵 SEATS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147
▫ Power Seats — If Equipped . . . . . . . . . . . . ..148
▫ Heated Seats — If Equipped . . . . . . . . . . . ..149
▫ Manual Front Seat Adjustment . . . . . . . . . . ..150
▫ Manual Seat Height Adjustment —

If Equipped. . . . . . . . . . . . . . . . . . . . . . . . . .152
▫ Manual Lumbar — If Equipped . . . . . . . . . ..152
▫ Driver’s Seatback Recline . . . . . . . . . . . . . . ..153
▫ Fold-Flat Front Passenger Seat . . . . . . . . . . ..154
▫ Head Restraints . . . . . . . . . . . . . . . . . . . . . .155
▫ Folding Rear Seat . . . . . . . . . . . . . . . . . . . ..158
▫ Reclining Rear Seat — If Equipped . . . . . . . ..159

䡵 TO OPEN AND CLOSE THE HOOD . . . . . . . ..160
䡵 LIGHTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162
▫ Multifunction Lever . . . . . . . . . . . . . . . . . ..162
▫ Headlights And Parking Lights . . . . . . . . . ..162
▫ Daytime Running Lights — If Equipped . . . ..163
▫ Lights-On Reminder . . . . . . . . . . . . . . . . . ..163
▫ Fog Lights — If Equipped . . . . . . . . . . . . . ..164
▫ Turn Signals . . . . . . . . . . . . . . . . . . . . . . . . .164
▫ High/Low Beam Switch . . . . . . . . . . . . . . ..165
▫ Flash-To-Pass . . . . . . . . . . . . . . . . . . . . . . . .165
▫ Instrument Panel Dimming. . . . . . . . . . . . . ..166
▫ Map/Reading Lights . . . . . . . . . . . . . . . . . ..167

䡵 WINDSHIELD WIPERS AND WASHERS . . . . ..168
▫ Windshield Wiper Operation . . . . . . . . . . . ..169
▫ Intermittent Wiper System . . . . . . . . . . . . . ..170
▫ Windshield Washers . . . . . . . . . . . . . . . . . ..170
▫ Mist Feature . . . . . . . . . . . . . . . . . . . . . . . . .171
䡵 TILT STEERING COLUMN . . . . . . . . . . . . . . ..171
䡵 ELECTRONIC SPEED CONTROL —

IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . . . .172
▫ To Activate . . . . . . . . . . . . . . . . . . . . . . . . . .173
▫ To Set A Desired Speed . . . . . . . . . . . . . . . ..174
▫ To Deactivate . . . . . . . . . . . . . . . . . . . . . . . .174
▫ To Resume Speed . . . . . . . . . . . . . . . . . . . ..174
▫ To Vary The Speed Setting . . . . . . . . . . . . . ..174
▫ To Accelerate For Passing . . . . . . . . . . . . . . ..175

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105
䡵 GARAGE DOOR OPENER — IF EQUIPPED . . .176
▫ Before You Begin Programming HomeLink威. . .177
▫ Programming A Rolling Code . . . . . . . . . . . ..178
▫ Programming A Non-Rolling Code . . . . . . . ..180
▫ Canadian/Gate Operator Programming . . . . ..181
▫ Using HomeLink威 . . . . . . . . . . . . . . . . . . . ..183
▫ Security . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
▫ Troubleshooting Tips . . . . . . . . . . . . . . . . . ..183
▫ General Information. . . . . . . . . . . . . . . . . . ..184
䡵 POWER SUNROOF — IF EQUIPPED . . . . . . ..185
▫ Opening Sunroof — Express . . . . . . . . . . . . ..186
▫ Opening Sunroof — Manual Mode . . . . . . . ..186
▫ Closing Sunroof — Express. . . . . . . . . . . . . ..186

106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Closing Sunroof — Manual Mode . . . . . . . . ..186
▫ Pinch Protect Feature . . . . . . . . . . . . . . . . . ..186
▫ Venting Sunroof — Express . . . . . . . . . . . . ..187
▫ Sunshade Operation. . . . . . . . . . . . . . . . . . ..187
▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . .187
▫ Sunroof Maintenance . . . . . . . . . . . . . . . . . ..187
▫ Ignition Off Operation . . . . . . . . . . . . . . . . ..187
䡵 ELECTRICAL POWER OUTLETS . . . . . . . . . ..188
䡵 POWER INVERTER — IF EQUIPPED. . . . . . . ..190
䡵 CUPHOLDERS. . . . . . . . . . . . . . . . . . . . . . . . .192
䡵 STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . .194
▫ Glove Compartment And Storage Bin . . . . . ..194
▫ Door Storage. . . . . . . . . . . . . . . . . . . . . . . . .195

䡵 CONSOLE FEATURES . . . . . . . . . . . . . . . . . ..196
䡵 CARGO AREA FEATURES . . . . . . . . . . . . . . ..197

▫ Cargo Light/Removable Self-Recharging

Flashlight . . . . . . . . . . . . . . . . . . . . . . . . . . .197
▫ Cargo Cover . . . . . . . . . . . . . . . . . . . . . . . .198
▫ Removable Load Floor . . . . . . . . . . . . . . . ..200
▫ Cargo Tie-Down Loops . . . . . . . . . . . . . . . ..200
▫ Fold Down Speakers — If Equipped . . . . . . ..202
䡵 REAR WINDOW FEATURES . . . . . . . . . . . . ..203
▫ Rear Window Wiper/Washer . . . . . . . . . . . ..203
▫ Rear Window Defroster . . . . . . . . . . . . . . . ..204
䡵 ROOF LUGGAGE RACK — IF EQUIPPED . . . .205

MIRRORS

Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of vehicle). The mirror should be adjusted while set in the day position (toward the windshield).

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107

Inside Day/Night Mirror

108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activated. The sensor to the right of the button does not illuminate. NOTE: This feature is disabled when the vehicle is moving in reverse.

Automatic Dimming Mirror

CAUTION!

To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109

Folding Outside Mirrors The outside mirrors are hinged and may be moved, manually, either forward or rearward to resist damage. The hinges have three detent positions; full forward, full rearward and normal. Power Mirrors The power mirror control is located on the driver’s door trim panel.

Outside Mirror — Driver Side Adjust the flat outside mirror so you can just see the side of your vehicle in the part of the mirror closest to the vehicle with your head close to the door glass. Outside Mirror — Passenger Side Adjust the convex outside mirror so you can just see the side of your vehicle in the part of the mirror closest to the vehicle with your head close to the center of the vehicle.

WARNING!

Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in this convex mirror.

110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Heated Mirrors — If Equipped

These mirrors are heated to melt frost or ice. This feature is activated whenever you turn on the rear window defroster. Refer to “Rear Window Features” in “Understanding the Features of Your Vehicle” for further information. Vanity Mirrors — If Equipped To use the vanity mirror, rotate the sun visor down and swing the mirror cover upward.

Power Mirror Control

To adjust a mirror, turn the control wand toward the left or right mirror positions indicated. Tilt the control wand in the direction you want the mirror to move. When you are finished adjusting the mirror, turn the control to the center position to prevent accidentally moving a mirror.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111

Uconnect姞 Phone — IF EQUIPPED Uconnect威 Phone is a voice-activated, hands-free, in- vehicle communications system. Uconnect威 Phone allows you to dial a phone number with your mobile phone using simple voice commands (e.g., “Call” ѧ “Mike” ѧ “Work” or “Dial” ѧ “248-555-1212”). Your mobile phone’s audio is transmitted through your vehicle’s audio system; the sys- tem will automatically mute your radio when using the Uconnect威 Phone. NOTE: The Uconnect威 Phone requires a mobile phone equipped with the Bluetooth威 “Hands-Free Profile”, Ver- sion 0.96 or higher. See the Uconnect威 website for sup- ported phones. For Uconnect威 customer support, visit www.UconnectPhone.com or call 1–877–855–8400.

Vanity Mirror

Sun Visor Sliding Feature The sun visors may be extended out to provide more coverage of the side glass.

112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect威 Phone allows you to transfer calls between the system and your mobile phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. The Uconnect威 Phone is driven through your Bluetooth威 “Hands-Free Profile” mobile phone. Uconnect威 features Bluetooth威 technology - the global standard that enables different electronic devices to connect to each other without wires or a docking station, so Uconnect威 Phone works no matter where you stow your mobile phone (be it your purse, pocket, or briefcase), as long as your phone is turned on and has been paired to the vehicle’s Uconnect威 Phone. The Uconnect威 Phone allows up to seven mobile phones to be linked to the system. Only one linked (or paired) mobile phone can be used with the system at a time. The system is available in English, Spanish, or French languages.

WARNING!

Any voice commanded system should be used only in safe driving conditions following all applicable laws, including laws regarding phone use. Your at- tention should be focused on safely operating the vehicle. Failure to do so may result in a collision causing serious injury or death.

steering wheel controls

Uconnect威 Phone Button The radio or (if equipped) will contain the two control buttons (Uconnect威 Phone button and Voice Com- mand button) that will enable you to access the system. When you press the button you will hear the word Uconnect威 followed by a BEEP. The beep is your signal to give a command.

Voice Command Button

Actual button location may vary with the ra- dio. The individual buttons are described in the “Operation” section.

The Uconnect威 Phone can be used with any Hands-Free Profile certified Bluetooth威 mobile phone. See the Uconnect威 website for supported phones. Refer to your mobile service provider or the phone manufacturer for details. The Uconnect威 Phone is fully integrated with the vehi- cle’s audio system. The volume of the Uconnect威 Phone can be adjusted either from the radio volume control knob or from the steering wheel radio control (right switch), if so equipped. The radio display will be used for visual prompts from the Uconnect威 Phone such as “CELL” or caller ID on certain radios.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113

Operation Voice commands can be used to operate the Uconnect威 Phone and to navigate through the Uconnect威 Phone menu structure. Voice commands are required after most Uconnect威 Phone prompts. You will be prompted for a specific command and then guided through the available options. • Prior to giving a voice command, one must wait for the beep, which follows the “Ready” prompt or another prompt. • For certain operations, compound commands can be used. For example, instead of saying “Setup” and then “Pair a Device”, the following compound command can be said: “Pair a Bluetooth威 Device”. • For each feature explanation in this section, only the compound form of the voice command is given. You can also break the commands into parts and say each

114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

part of the command when you are asked for it. For example, you can use the compound form voice com- mand “Phonebook New Entry”, or you can break the compound form command into two voice commands: “Phonebook” and “New Entry”. Please remember, the Uconnect威 Phone works best when you talk in a normal conversational tone, as if speaking to someone sitting a few feet/meters away from you.

Voice Command Tree Refer to “Voice Tree” in this section. Help Command If you need assistance at any prompt, or if you want to know your options at any prompt, say “Help” following the beep. The Uconnect威 Phone will play some of the options at any prompt if you ask for help.

To activate the Uconnect威 Phone, simply press the button and follow the audible prompts for directions. Uconnect威 Phone sessions begin with a press of the

button on the radio control head.

Cancel Command At any prompt, after the beep, you can say “Cancel” and you will be returned to the main menu. However, in a few instances the system will take you back to the previous menu. Pair (Link) Uconnect威 Phone To A Mobile Phone To begin using your Uconnect威 Phone, you must pair your compatible Bluetooth威 enabled mobile phone. To complete the pairing process, you will need to reference your mobile phone Owner’s Manual. The Uconnect威 web- site may also provide detailed instructions for pairing.

button to begin.

“Device Pairing”.

and follow the audible prompts.

The following are general phone to Uconnect威 Phone pairing instructions: • Press the • After the “Ready” prompt and the following beep, say • When prompted, after the beep, say “Pair a Device” • You will be asked to say a four-digit Personal Identi- fication Number (PIN), which you will later need to enter into your mobile phone. You can enter any four-digit PIN. You will not need to remember this PIN after the initial pairing process. • For identification purposes, you will be prompted to give the Uconnect威 Phone a name for your mobile phone. Each mobile phone that is paired should be given a unique phone name.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115

• You will then be asked to give your mobile phone a priority level between one and seven, with one being the highest priority. You can pair up to seven mobile phones to your Uconnect威 Phone. However, at any given time, only one mobile phone can be in use, connected to your Uconnect威 System. The priority allows the Uconnect威 Phone to know which mobile phone to use if multiple mobile phones are in the vehicle at the same time. For example, if priority three and priority five phones are present in the vehicle, the Uconnect威 Phone will use the priority three mobile phone when you make a call. You can select to use a lower priority mobile phone at any time (refer to “Advanced Phone Connectivity” in this section).

Dial By Saying A Number • Press the • After the “Ready” prompt and the following beep, say

button to begin.

“Dial”.

want to call.

116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

• The system will prompt you to say the number you • For example, you can say “234-567-8901”. • The Uconnect威 Phone will confirm the phone number and then dial. The number will appear in the display of certain radios.

“Call”.

button to begin.

Call By Saying A Name • Press the • After the “Ready” prompt and the following beep, say • The system will prompt you to say the name of the • After the “Ready” prompt and the following beep, say the name of the person you want to call. For example, you can say “John Doe”, where John Doe is a previ- ously stored name entry in the Uconnect威 phonebook

person you want to call.

or downloaded phonebook. To learn how to store a name in the phonebook, refer to “Add Names to Your Uconnect威 Phonebook”, in the phonebook. • The Uconnect威 system will confirm the name and then dial the corresponding phone number, which may appear in the display of certain radios.

button to begin.

Add Names To Your Uconnect威 Phonebook NOTE: Adding names to the Uconnect威 Phonebook is recommended when the vehicle is not in motion. • Press the • After the “Ready” prompt and the following beep, say • When prompted, say the name of the new entry. Use of long names helps the Voice Command and it is recom- mended. For example, say “Robert Smith” or “Robert” instead of “Bob”.

“Phonebook New Entry”.

• When prompted, enter

the number designation (e.g., “Home”, “Work”, “Mobile”, or “Other”). This will allow you to store multiple numbers for each phonebook entry, if desired. • When prompted, recite the phone number for the

phonebook entry that you are adding.

After you are finished adding an entry into the phone- book, you will be given the opportunity to add more phone numbers to the current entry or to return to the main menu. The Uconnect威 Phone will allow you to enter up to 32 names in the phonebook with each name having up to four associated phone numbers and designations. Each language has a separate 32-name phonebook accessible only in that language. In addition, if equipped and supported by your phone, Uconnect威 Phone automati- cally downloads your mobile phone’s phonebook.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117

Phonebook Download – Automatic Phonebook Transfer From Mobile Phone If equipped and specifically supported by your phone, Uconnect威 Phone automatically downloads names (text names) and number entries from your mobile phone’s phonebook. Specific Bluetooth威 Phones with Phone Book Access Profile may support this feature. See Uconnect威 website for supported phones. • To call a name from the Uconnect威 Phonebook or downloaded Phonebook, follow the procedure in “Call by Saying a Name” section. • Automatic download and update, if supported, begins as soon as the Bluetooth威 wireless phone connection is made to the Uconnect威 Phone, for example, after you start the vehicle.

118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

• A maximum of 1000 entries per phone will be down- loaded and updated every time a phone is connected to the Uconnect威 Phone. • Depending on the maximum number of entries down- loaded, there may be a short delay before the latest downloaded names can be used. Until then, if avail- able, the previously downloaded phonebook is avail- able for use. • Only the phonebook of the currently connected mobile • Either the mobile phone’s phonebook or the mobile • This downloaded phonebook cannot be edited or deleted on the Uconnect威 Phone. These can only be edited on the mobile phone. The changes are trans- ferred and updated to Uconnect威 Phone on the next phone connection.

phone’s SIM card phonebook is downloaded.

phone is accessible.

deleted or edited.

when the vehicle is not in motion.

Edit Uconnect威 Phonebook Entries NOTE: • Editing names in the phonebook is recommended • Automatic downloaded phonebook entries cannot be • Press the • After the “Ready” prompt and the following beep, say • You will then be asked for the name of the phonebook • Next, choose the number designation (home, work, • When prompted, recite the new phone number for the

mobile, or other) that you wish to edit.

entry that you wish to edit.

“Phonebook Edit Entry”.

button to begin.

phonebook entry that you are editing.

After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in the phonebook, call the number you just edited, or return to the main menu. “Phonebook Edit Entry” can be used to add another phone number to a name entry that already exists in the phonebook. For example, the entry John Doe may have a mobile and a home number, but you can add “John Doe’s” work number later using the “Phonebook Edit Entry” feature. Delete Uconnect威 Phonebook Entry NOTE: Editing phonebook entries is recommended when the vehicle is not in motion. • Press the • After the “Ready” prompt and the following beep, say

button to begin.

“Phonebook Delete”.

the

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119

• After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete. You can either say the name of a phonebook entry that you wish to delete or you can say “List Names” to hear a list of the entries in the phonebook from which you choose. To select one of the entries from the list, press button while the Uconnect威 Phone is playing the desired entry and say “Delete”. • After you enter the name, the Uconnect威 Phone will ask you which designation you wish to delete: home, work, mobile, other, or all. Say the designation you wish to delete. • Note that only the phonebook entry in the current • Automatic downloaded phonebook entries cannot be

language is deleted.

deleted or edited.

button to begin.

“Phonebook Erase All”.

120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Delete/Erase “All” Uconnect威 Phonebook Entries • Press the • After the “Ready” prompt and the following beep, say • The Uconnect威 Phone will ask you to verify that you • After confirmation, the phonebook entries will be • Note that only the phonebook in the current language • Automatic downloaded phonebook entries cannot be

wish to delete all the entries from the phonebook.

is deleted.

deleted.

deleted or edited.

List All Names In The Uconnect威 Phonebook • Press the • After the “Ready” prompt and the following beep, say

button to begin.

“Phonebook List Names”.

• The Uconnect威 Phone will play the names of all the phonebook entries, including the downloaded phone- book entries, if available.

• To call one of the names in the list, press the

button during the playing of the desired name, and say “Call”. NOTE: The user can also exercise “Edit” or “Delete” operations at this point. • The Uconnect威 Phone will then prompt you as to the number designation you wish to call. • The selected number will be dialed. Phone Call Features The following features can be accessed through the Uconnect威 Phone if the feature(s) are available on your mobile service plan. For example, if your mobile service plan provides three-way calling, this feature can be accessed through the Uconnect威 Phone. Check with your mobile service provider for the features that you have.

Answer Or Reject An Incoming Call — No Call Currently In Progress When you receive a call on your mobile phone, the Uconnect威 Phone will interrupt the vehicle audio system, if on, and will ask if you would like to answer the call. button to accept the call. To reject the call, Press the button until you hear a single beep, press and hold the indicating that the incoming call was rejected. Answer Or Reject An Incoming Call — Call Currently In Progress If a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your button to place the current mobile phone. Press the call on hold and answer the incoming call.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121
NOTE: The Uconnect威 Phone compatible phones in the market today do not support rejecting an incoming call when another call is in progress. Therefore, the user can only answer an incoming call or ignore it. Making A Second Call While Current Call Is In Progress To make a second call while you are currently on a call, button and say “Dial” or “Call” followed press the by the phone number or phonebook entry you wish to call. The first call will be on hold while the second call is in progress. To go back to the first call, refer to “Toggling Between Calls” in this section. To combine two calls, refer to “Conference Call” in this section.

122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Place/Retrieve A Call From Hold To put a call on hold, press the button until you hear a single beep. This indicates that the call is on hold. To but- bring the call back from hold, press and hold the ton until you hear a single beep. Toggling Between Calls If two calls are in progress (one active and one on hold), press the button until you hear a single beep, indicat- ing that the active and hold status of the two calls have switched. Only one call can be placed on hold at a time. Conference Call When two calls are in progress (one active and one on button until you hear a hold), press and hold the double beep indicating that the two calls have been joined into one conference call.

Three-Way Calling To initiate three-way calling, press the button while a call is in progress, and make a second phone call, as described under “Making a Second Call While Current Call is in Progress”. After the second call has established, button until you hear a double press and hold the beep, indicating that the two calls have been joined into one conference call. Call Termination To end a call in progress, momentarily press the but- ton. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. If the active call is terminated by the phone far end, a call on hold may not become active automatically. This is cell phone-dependent. To bring the call back from hold, press and hold the

button until you hear a single beep.

button to begin.

Redial • Press the • After the “Ready” prompt and the following beep, say • The Uconnect威 Phone will call the last number that

“Redial”.

was dialed from your mobile phone.

NOTE: This may not be the last number dialed from the Uconnect威 Phone. Call Continuation Call continuation is the progression of a phone call on the Uconnect威 Phone after the vehicle ignition has been switched to OFF. Call continuation functionality avail- able on the vehicle can be any one of three types: • After the ignition is switched to OFF, a call can continue on the Uconnect威 Phone either until the call ends, or until the vehicle battery condition dictates cessation of the call on the Uconnect威 Phone and transfer of the call to the mobile phone.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123

• After the ignition is cycled to OFF, a call can continue on the Uconnect威 Phone for a certain duration, after which the call is automatically transferred from the Uconnect威 Phone to the mobile phone. • An active call is automatically transferred to the mo-

bile phone after the ignition is cycled to OFF.

Uconnect姞 Phone Features

button to begin.

Language Selection To change the language that the Uconnect威 Phone is using: • Press the • After the “Ready” prompt and the following beep, say the name of the language you wish to switch to English, Espanol, or Francais. • Continue to follow the system prompts to complete the

language selection.

124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE After selecting one of the languages, all prompts and voice commands will be in that language. NOTE: After every Uconnect威 Phone language change operation, only the language-specific 32-name phone- book is usable. The paired phone name is not language- specific and is usable across all languages. Emergency Assistance If you are in an emergency and the mobile phone is reachable: • Pick up the phone and manually dial the emergency

number for your area.

If the phone is not reachable and the Uconnect威 Phone is operational, you may reach the emergency number as follows: • Press the

button to begin.

• After the “Ready” prompt and the following beep, say “Emergency” and the Uconnect威 Phone will instruct the paired mobile phone to call the emergency number. This feature is supported in the U.S., Canada, and Mexico.

NOTE: • The emergency number dialed is based on the country where the vehicle is purchased (911 for the U.S. and Canada and 060 for Mexico). The number dialed may not be applicable with the available mobile service and area. • If supported, this number may be programmable on button and say

some systems. To do this, press the “Setup”, followed by “Emergency”.

• The Uconnect威 Phone does slightly lower your chances of successfully making a phone call as to that for the mobile phone directly.

WARNING!

To use you Uconnect威 Phone System in an emer- gency, your mobile phone must be: • turned on, • paired to the Uconnect威 System, • and have network coverage. Roadside Assistance If you need roadside assistance: • Press the button to begin. • After the “Ready” prompt and the following beep, say

“Roadside Assistance”.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125

NOTE: • The roadside assistance number dialed is based on the country where the vehicle is purchased (1-800-528-2069
for the U.S., 1-877-213-4525 for Canada, 55-14-3454 for Mexico City and 1-800-712-3040 for outside Mexico City in Mexico). Please refer to the “Roadside Assistance” coverage details on the DVD in the Warranty Informa- tion Booklet and the Roadside Assistance references. • If supported, this number may be programmable on button and say

some systems. To do this, press the “Setup”, followed by “Roadside Assistance”.

Paging To learn how to page, refer to “Working with Automated Systems”. Paging works properly except for pagers of certain companies, which time out a little too soon to work properly with the Uconnect威 Phone.

126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Mail Calling To learn how to access your voice mail, refer to “Working with Automated Systems”. Working With Automated Systems This method is used in instances where one generally has to press numbers on the mobile phone keypad while navigating through an automated telephone system. You can use your Uconnect威 Phone to access a voice mail system or an automated service, such as a paging service or automated customer service line. Some services re- quire immediate response selection. In some instances, that may be too quick for use of the Uconnect威 Phone. When calling a number with your Uconnect威 Phone that normally requires you to enter in a touch-tone sequence on your mobile phone keypad, you can press the button and say the sequence you wish to enter, followed by the word “Send”. For example, if required to

enter your PIN followed with a pound, (3 7 4 6 #), you can press the button and say, “3 7 4 6 #Send”. Saying a number, or sequence of numbers, followed by “Send”, is also to be used for navigating through an automated customer service center menu structure, and to leave a number on a pager. You can also send stored Uconnect威 phonebook entries as tones for fast and easy access to voice mail and pager entries. To use this feature, dial the number you wish to button and say, “Send.” The call and then press the system will prompt you to enter the name or number and say the name of the phonebook entry you wish to send. The Uconnect威 Phone will then send the corresponding phone number associated with the phonebook entry, as tones over the phone. NOTE: • You may not hear all of the tones due to mobile phone

network configurations. This is normal.

• Some paging and voice mail systems have system time out settings that are too short and may not allow the use of this feature.

Barge In — Overriding Prompts The “Voice Command” button can be used when you wish to skip part of a prompt and issue your voice command immediately. For example, if a prompt is asking “Would you like to pair a phone, clear a...,” you button and say, “Pair a Phone” to could press the select that option without having to listen to the rest of the voice prompt. Turning Confirmation Prompts ON/OFF Turning confirmation prompts off will stop the system from confirming your choices (e.g., the Uconnect威 Phone will not repeat a phone number before you dial it). • Press the

button to begin.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127

• After the “Ready” prompt and the following beep, say

one of the following: – “Setup Confirmation Prompts On” – “Setup Confirmation Prompts Off”

Phone And Network Status Indicators If available on the radio and/or on a premium display such as the instrument panel cluster, and supported by your mobile phone, the Uconnect威 Phone will provide notification to inform you of your phone and network status when you are attempting to make a phone call using Uconnect威 Phone. The status is given for network signal strength, phone battery strength, etc. Dialing Using The Mobile Phone Keypad You can dial a phone number with your mobile phone keypad and still use the Uconnect威 Phone (while dialing via the mobile phone keypad, the user must exercise caution and take precautionary safety measures). By

128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE dialing a number with your paired Bluetooth威 mobile phone, the audio will be played through your vehicle’s audio system. The Uconnect威 Phone will work the same as if you dial the number using Voice Command. NOTE: Certain brands of mobile phones do not send the dial ring to the Uconnect威 Phone to play it on the vehicle audio system, so you will not hear it. Under this situa- tion, after successfully dialing a number the user may feel that the call did not go through even though the call is in progress. Once your call is answered, you will hear the audio. Mute/Un-Mute (Mute ON/OFF) When you mute the Uconnect威 Phone, you will still be able to hear the conversation coming from the other party, but the other party will not be able to hear you.

button.

In order to mute the Uconnect威 Phone: • Press the • Following the beep, say “Mute”. In order to un-mute the Uconnect威 Phone: • Press the • Following the beep, say “Mute off”. Advanced Phone Connectivity

button.

Transfer Call To And From Mobile Phone The Uconnect威 Phone allows ongoing calls to be trans- ferred from your mobile phone to the Uconnect威 Phone without terminating the call. To transfer an ongoing call from your Uconnect威 Phone paired mobile phone to the Uconnect威 Phone or vice versa, press the button and say “Transfer Call”.

Connect Or Disconnect Link Between The Uconnect威 Phone And Mobile Phone Your mobile phone can be paired with many different electronic devices, but can only be actively “connected” with one electronic device at a time. If you would like to connect or disconnect the Bluetooth威 connection between your mobile phone and the Uconnect威 Phone System, follow the instructions described in your mobile phone User’s Manual. List Paired Mobile Phone Names • Press the • After the “Ready” prompt and the following beep, say • When prompted, say “List Phones”. • The Uconnect威 Phone will play the phone names of all paired mobile phones in order from the highest to the

“Setup Phone Pairing”.

button to begin.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129
lowest priority. To “Select” or “Delete” a paired phone being announced, press the button and say “Se- lect” or “Delete”. Also, see the next two sections for an alternate way to “Select” or “Delete” a paired phone.

button to begin.

Select Another Mobile Phone This feature allows you to select and start using another phone paired with the Uconnect威 Phone. • Press the • After the “Ready” prompt and the following beep, say • You can also press the

button at any time while the list is being played, and then choose the phone that you wish to select. • The selected phone will be used for the next phone the

“Setup Select Phone” and follow the prompts.

the selected phone is not available,

call.

If

130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Uconnect威 Phone will return to using the highest priority phone present in or near (approximately within 30 ft (9 m)) the vehicle.

button to begin.

“Setup Phone Pairing”.

Delete Uconnect威 Phone Paired Mobile Phones • Press the • After the “Ready” prompt and the following beep, say • At the next prompt, say “Delete” and follow the • You can also press the

button at any time while the list is being played, and then choose the phone you wish to delete.

prompts.

Things You Should Know About Your Uconnect姞 Phone Uconnect威 Phone Tutorial To hear a brief tutorial of the system features, press the

button and say “Uconnect威 Tutorial.”

Voice Training For users experiencing difficulty with the system recog- nizing their voice commands or numbers, the Uconnect威 Phone Voice Training feature may be used. To enter this training mode, follow one of the two following proce- dures: From outside the Uconnect威 Phone mode (e.g., from radio mode): • Press and hold the

button for five seconds until

the session begins, or,

• Press the

button and say the “Voice Training”, “System Training”, or “Start Voice Training” com- mand.

You can either press the Uconnect威 Phone button to restore the factory setting or repeat the words and phrases when prompted by the Uconnect威 Phone. For best results, the Voice Training session should be com- pleted when the vehicle is parked with the engine running, all windows closed, and the blower fan switched off. This procedure may be repeated with a new user. The system will adapt to the last trained voice only. Reset • Press the • After the “Ready” prompt, and the following beep, say

button.

“Setup”, then “Reset”.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131
This will delete all phone pairing, phone book entries, and other settings in all language modes. The System will prompt you before resetting to factory settings. Voice Command • For best performance, adjust the rearview mirror to provide at least ½ in (1 cm) gap between the overhead console (if equipped) and the mirror.

• Always wait for the beep before speaking. • Speak normally, without pausing, just as you would speak to a person sitting a few feet/meters away from you. • Make sure that no one other than you is speaking during a Voice Command period. • Performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed,

132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

• low road noise, • smooth road surface, • fully closed windows, • dry weather condition. • Even though the system is designed for users speaking in North American English, French, and Spanish ac- cents, the system may not always work for some. • When navigating through an automated system such as voice mail, or when sending a page, at the end of speaking the digit string, make sure to say “Send”. • Storing names in the phonebook when the vehicle is • It is not recommended to store similar sounding names • Phonebook (Downloaded and Uconnect威 Phone Lo- cal) name recognition rate is optimized when the entries are not similar.

not in motion is recommended.

in the Uconnect威 Phonebook.

be spoken “eight-zero-zero” not “eight hundred”.

• Numbers must be spoken in single digits. “800” must • You can say “O” (letter “O”) for “0” (zero). • Even though international dialing for most number combinations is supported, some shortcut dialing number combinations may not be supported. • In a convertible vehicle, system performance may be

compromised with the convertible top down.

Far End Audio Performance • Audio quality is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows,

• dry weather conditions, and • operation from the driver’s seat. • Performance, such as audio clarity, echo, and loudness to a large degree rely on the phone and network, and not the Uconnect威 Phone. • Echo at the phone far end can sometimes be reduced • In a convertible vehicle, system performance may be

by lowering the in-vehicle audio volume.

compromised with the convertible top down.

Recent Calls If your phone supports “Automatic Phonebook Down- load”, Uconnect威 Phone can list your Outgoing, Incom- ing and Missed Calls.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133

SMS Uconnect威 Phone can read or send new messages on your phone. Read Messages: If you receive a new text message while your phone is connected to Uconnect威 Phone, an announcement will be made to notify you that you have a new text message. If you wish to hear the new message: • Press the • After the “Ready” prompt and the following beep, say • Uconnect威 Phone will play the new text message for

“SMS Read” or “Read Messages.”

button.

you.

After reading a message, you can “Reply” or “Forward” the message using Uconnect威 Phone.

134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Send Messages: You can send messages using Uconnect威 Phone. To send a new message: • Press the • After the “Ready” prompt and the following beep, say • You can either say the message you wish to send or say

“SMS Send” or “Send Message.”

button.

“List Messages.” There are 20 preset messages.

button while the

To send a message, press the system is listing the message and say “Send.” Uconnect威 Phone will prompt you to say the name or number of the person you wish to send the message to. List of Preset Messages: 1. Yes 2. No

3. Where are you? 4. I need more direction. 5. L O L 6. Why 7. I love you 8. Call me 9. Call me later 10. Thanks 11. See You in 15 minutes 12. I am on my way 13. I’ll be late 14. Are you there yet? 15. Where are we meeting?

16. Can this wait? 17. Bye for now 18. When can we meet? 19. Send number to call 20. Start without me Turn SMS Incoming Announcement ON/OFF Turning the SMS Incoming Announcement OFF will stop the system from announcing the new incoming mes- sages. • Press the • After the “Ready” prompt and the following beep, say “Setup, SMS Incoming Message Announcement,” you will then be given a choice to change it.

button.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135

Bluetooth威 Communication Link Mobile phones have been found to lose connection to the Uconnect威 Phone. When this happens, the connection can generally be reestablished by switching the phone off/on. Your mobile phone is recommended to remain in Bluetooth威 ON mode. Power-Up After switching the ignition from OFF to either the ON or ACC position, or after a language change, you must wait at least fifteen seconds prior to using the system.

136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137

138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Voice Commands

Primary

Alternate (s)

zero one two three four five six

seven eight nine star (*) plus (+) pound (#) add location

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139

Voice Commands

Alternate (s)

Primary

all call cancel

confirmation prompts

continue delete dial

download

edit

emergency

English erase all Espanol Francais

140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Voice Commands

Alternate (s)

Voice Commands

Alternate (s)

Primary previous

record again

redial

return to main menu

return or main menu

Primary

help home

language list names list phones

mobile mute

mute off new entry

no other

pair a phone phone pairing

phonebook

pairing

phone book

select

phone settings or phone

set up

select phone

send set up

towing assistance

transfer call

Uconnect威 Tutorial

voice training

work yes

General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired op- eration.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141

VOICE COMMAND — IF EQUIPPED

Voice Command System Operation

The Uconnect威 Voice Command system allows you to control your AM, FM radio, disk player, USB mass storage class device, iPOD family of devices, Bluetooth Streaming Audio Device,

satellite radio, disc player, and a memo recorder. NOTE: Take care to speak into the Voice Interface Sys- tem as calmly and normally as possible. The ability of the Voice Interface System to recognize user voice commands may be negatively affected by rapid speaking or a raised voice level.

142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

WARNING!

Any voice commanded system should be used only in safe driving conditions following all applicable laws. Your attention should be focused on safely operating the vehicle. Failure to do so may result in a collision causing serious injury or death.

button, you When you press the Voice Command will hear a beep. The beep is your signal to give a command. NOTE: If you do not say a command within a few seconds, the system will present you with a list of options. If you ever wish to interrupt the system while it lists button, listen for options, press the Voice Command the beep, and say your command.

Pressing the Voice Command button while the system is speaking is known as “barging in.” The system will be interrupted, and after the beep, you can add or change commands. This will become helpful once you start to learn the options. NOTE: At any time, you can say the words “Cancel”, “Help” or “Main Menu”. These commands are universal and can be used from any menu. All other commands can be used depending upon the active application. When using this system, you should speak clearly and at a normal speaking volume. The system will best recognize your speech if the win- dows are closed, and the heater/air conditioning fan is set to low. At any point, if the system does not recognize one of your commands, you will be prompted to repeat it.

button and say “Help” or “Main Menu”.

To hear the first available Menu, press the Voice Com- mand Commands The Voice Command system understands two types of commands. Universal commands are available at all times. Local commands are available if the supported radio mode is active. Changing the Volume 1. Start a dialogue by pressing the Voice Command

button.

2. Say a command (e.g., “Help”). 3. Use the ON/OFF VOLUME rotary knob to adjust the volume to a comfortable level while the Voice Com- mand system is speaking. Please note the volume setting for Voice Command is different than the audio system.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143

Main Menu Start a dialogue by pressing the Voice Command button. You may say “Main Menu” to switch to the

main menu. In this mode, you can say the following commands: • “Radio AM” (to switch to the radio AM mode) • “Radio FM” (to switch to radio FM mode) • “Disc” (to switch to the disc mode) • “USB” (to switch to USB mode) • “Bluetooth Streaming” (to switch to Bluetooth威 • “Memo” (to switch to the memo recorder) • “System Setup” (to switch to system setup)

Streaming mode)

144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Radio AM To switch to the AM band, say “AM” or “Radio AM”. In this mode, you may say the following commands: • “Frequency #” (to change the frequency) • “Next Station” (to select the next station) • “Previous Station” (to select the previous station) • “Radio Menu” (to switch to the radio menu) • “Main Menu” (to switch to the main menu) Radio FM To switch to the FM band, say “FM” or “Radio FM”. In this mode, you may say the following commands: • “Frequency #” (to change the frequency) • “Next Station” (to select the next station) • “Previous Station” (to select the previous station)

• “Menu Radio” (to switch to the radio menu) • “Main Menu” (to switch to the main menu) Satellite Radio To switch to satellite radio mode, say “Sat” or “Satellite Radio”. In this mode, you may say the following com- mands: • “Channel Number” (to change the channel by its • “Next Channel” (to select the next channel) • “Previous Channel” (to select the previous channel) • “List Channel” (to hear a list of available channels) • “Select Name” (to say the name of a channel) • “Menu Radio” (to switch to the radio menu) • “Main Menu” (to switch to the main menu)

spoken number)

Disc Mode To switch to the disc mode, say “Disc”. In this mode, you may say the following commands: • “Track” (#) (to change the track) • “Next Track” (to play the next track) • “Previous Track” (to play the previous track) • “Main Menu” (to switch to the main menu) USB Mode To switch to USB mode, say “USB”. In this mode, you may say the following commands: • “Next Track” (to play the next track) • “Previous Track” (to play the previous track) • “Play” (to play a Artist Name, Playlist Name, Album

Name, Track Name, etc.)

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145

Bluetooth威 Streaming (BT) Mode To switch to Bluetooth威 Streaming (BT) mode, say “Bluetooth Streaming”. In this mode, you may say the following commands: • “Next Track” (to play the next track) • “Previous Track” (to play the previous track) • “List” (to list a Artist, Playlist, Album, Track, etc.) Memo Mode To switch to the voice recorder mode, say “Memo”. In this mode, you may say the following commands: • “New Memo” (to record a new memo) — During the the Voice Command button to stop recording. You proceed by saying

recording, you may press

one of the following commands: – “Save” (to save the memo) – “Continue” (to continue recording)

146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

– “Delete” (to delete the recording)

• “Play Memos” (to play previously recorded memos) — During the playback you may press the Voice Com- button to stop playing memos. You pro- mand ceed by saying one of the following commands: – “Repeat” (to repeat a memo) – “Next” (to play the next memo) – “Previous” (to play the previous memo) – “Delete” (to delete a memo)

• “Delete All” (to delete all memos) Setup To switch to system setup, you may say one of the following: • “Change to setup” • “Switch to system setup” • “Change to setup”

• “Main menu setup” or • “Switch to setup” In this mode, you may say the following commands: • “Language English” • “Language French” • “Language Spanish” • “Tutorial” • “Voice Training” NOTE: Keep in mind that you have to press the Voice Command button first and wait for the beep before speaking the “Barge In” commands. Voice Training For users experiencing difficulty with the system recog- nizing their voice commands or numbers the Uconnect威 Voice “Voice Training” feature may be used.

1. Press the Voice Command

button, say “System Setup” and once you are in that menu then say “Voice Training.” This will train your own voice to the system and will improve recognition.

2. Repeat the words and phrases when prompted by Uconnect威 Voice. For best results, the “Voice Training” session should be completed when the vehicle is parked, engine running, all windows closed, and the blower fan switched off. This procedure may be re- peated with a new user. The system will adapt to the last trained voice only.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147

SEATS Seats are a part of the Occupant Restraint System of the vehicle.

WARNING!

• It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Be sure everyone in your vehicle is in a seat and using a seat belt properly.

148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Seats — If Equipped Some models may be equipped with a power driver’s seat. The power seat switch is located on the outboard side of the seat near the floor. Use the switch to move the seat up, down, forward, rearward, or to tilt the seat.

Power Seat Switch

WARNING!

• Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt.

CAUTION!

Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path.

Adjusting The Seat Forward Or Rearward The seat can be adjusted both forward and rearward. Push the seat switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position has been reached. Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down. Pull upward or push downward on the seat switch, the seat will move in the direction of the switch. Release the switch when the desired position is reached. Tilting The Seat Up Or Down The angle of the seat cushion can be adjusted in four directions. Pull upward or push downward on the front or rear of the seat switch, the front or rear of the seat cushion will move in the direction of the switch. Release the switch when the desired position is reached.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149

Heated Seats — If Equipped On some models, the front driver and passenger seats may be equipped with heaters in both the seat cushions and seatbacks. The controls for the front heated seats are located on the center instrument panel area. You can choose from HIGH, LOW or OFF heat settings. Amber indicator lights in each switch indicate the level of heat in use. Two indicator lights will illuminate for HIGH, one for LOW and none for OFF.

Press the switch once to select HIGH-level heating. Press the switch a second time to select LOW-level heating. Press the switch a third time to shut the heating elements OFF.

When the HIGH-level setting is selected, the heater will provide a boosted heat level during the initial stages of operation. Then, the heat output will drop to the normal HI-level. If the HI-level setting is selected, the system will automatically switch to LOW-level after approximately

150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 30 minutes of continuous operation. At that time, the display will change from HI to LO, indicating the change. When the LOW-level heating is selected, the system automatically turns the heater and the indicator light OFF after a maximum of 30 minutes of continuous operation. NOTE: Once a heat setting is selected, heat will be felt within two to five minutes.

WARNING!

• Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaus- tion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time.

(Continued)

WARNING! (Continued)

• Do not place anything on the seat or seatback that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface tempera- ture of the seat.

Manual Front Seat Adjustment On models equipped with manual seats, the adjusting bar is located at the front of the seats, near the floor. While sitting in the seat, lift up on the bar and move the seat forward or rearward. Release the bar once you have reached the desired position. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151

WARNING!

• Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt.

Manual Seat Adjusting Bar

152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Seat Height Adjustment — If Equipped The driver’s seat height can be raised or lowered by using a lever, located on the outboard side of the seat. Pull upward on the lever to raise the seat height or push downward on the lever to lower the seat height.

Manual Lumbar — If Equipped The lumbar adjustment handle is located on the outboard side of the driver’s seatback. Rotate the lever downward to increase the lumbar support or rotate the lever upward to decrease the lumbar support.

Seat Height Adjustment Lever

Lumbar Adjustment Lever

Driver’s Seatback Recline To adjust the seatback, lift the lever located on the outboard side of the seat, lean back to the desired angle and release the lever. To return the seatback, lift the lever, lean forward and release the lever.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153

WARNING!

Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death.

Recline Lever

154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fold-Flat Front Passenger Seat To fold the front passenger seat, lift the recliner handle to the full upward position and push the seatback forward until it rests on the seat cushion.

Fold-Flat Seat

Fold-Flat Lever

Head Restraints Head restraints are designed to reduce the risk of injury by restricting head movement in the event of a rear impact. Head restraints should be adjusted so that the top of the head restraint is located above the top of your ear.

WARNING!

The head restraints for all occupants must be prop- erly adjusted prior to operating the vehicle or occu- pying a seat. Head restraints should never be ad- justed while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155

Active Head Restraints — Front Seats Active Head Restraints are passive, deployable compo- nents, and vehicles with this equipment cannot be readily identified by any markings, only through visual inspec- tion of the head restraint. The head restraint will be split in two halves, with the front half being soft foam and trim, the back half being decorative plastic. When AHRs deploy during a rear impact, the front half of the head restraint extends forward to minimize the gap between the back of the occupant’s head and the AHR. This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in certain types of rear impacts. Refer to “Occupant Re- straints” in “Things To Know Before Starting Your Ve- hicle” for further information.

156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To raise the head restraint, pull upward on the head restraint. To lower the head restraint, press the push button, located at the base of the head restraint, and push downward on the head restraint.

the back of your head, pull forward on the bottom of the head restraint. Push rearward on the bottom of the head restraint to move the head restraint away from your head.

Push Button

Active Head Restraint (Normal Position)

For comfort the Active Head Restraints can be tilted forward and backward. To tilt the head restraint closer to

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157

• In the event of deployment of an Active Head Re- straint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things To Know Before Starting Your Vehicle” for further information.

WARNING!

• Do not place items over the top of the Active Head Restraint, such as coats, seat covers or portable DVD players. These items may interfere with the operation of the Active Head Restraint in the event of a collision and could result in serious injury or death.

(Continued)

Active Head Restraint (Tilted Position)

NOTE: • The head restraints should only be removed by quali- fied technicians, for service purposes only. If either of the head restraints require removal, see your autho- rized dealer.

Folding Rear Seat To provide additional storage area, each rear seatback can be folded forward. Pull the strap forward to fold the rear seatback flat.

158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

WARNING! (Continued)

• Active Head Restraints may be deployed if they are struck by an object such as a hand, foot or loose cargo. To avoid accidental deployment of the Ac- tive Head Restraint ensure that all cargo is secured, as loose cargo could contact the Active Head Re- straint during sudden stops. Failure to follow this warning could cause personal injury if the Active Head Restraint is deployed.

Rear Head Restraints The head restraints in the rear are non adjustable. Refer to “Occupant Restraints” in “Things To Know Before Start- ing Your Vehicle” for information on Tether routing.

Rear Seat Release Strap

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159

WARNING!

Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury.

Reclining Rear Seat — If Equipped For additional comfort, pull the strap forward just enough to release the seatback latch. Then push the seatback to a reclined position, approximately 35 degrees maximum, and release the strap.

Folded Rear Seat

To raise the seatback, pull the strap forward and lift the seatback into its upright position.

160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

WARNING!

Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner