2012 Honda Fit Owners Manual

Download PDF Manual
contact a dealer. Do not try to force the disc out of the player. ● Check that the disc is not damaged or deformed. 2 Protecting CDs P. 138 QRG TOC Index Home 135 2012 FitUS FIT-31TK6630.book 136 ページ２０１１年６月１５日　水曜日　午後４時２３分 uuAudio Error MessagesuiPod®/USB Flash Drive * iPod®/USB Flash Drive* If an error occurs while playing an iPod® or USB flash drive, you may see the following error messages. If you cannot clear the error message, contact a dealer. Error Message USB ERROR BAD USB DEVICE PLEASE CHECK OWNERS MANUAL Solution Appears when there is a problem with the USB adapter unit. Check if the device is compatible with the USB adapter unit. Appears when an incompatible device is connected. Disconnect the device. Then turn the audio system off, and turn it on again. Do not reconnect the device that caused the error. iPod NO SONG Appears when the iPod® is empty. Check that compatible files are stored on the device. UNSUPPORTED VER. Appears when an unsupported iPod® is connected. If it appears when a supported iPod® is connected, update the iPod® software to the newer version. CONNECT RETRY Appears when the system does not acknowledge the iPod®. Reconnect the iPod®. UNPLAYABLE FILE USB NO SONG UNSUPPORTED Appears when the files in the USB flash drive are DRM or an unsupported format. This error message appears for about 3 seconds, then plays the next song. Appears when the USB flash drive is empty or there are no MP3, WMA, or AAC files in the USB flash drive. Check that compatible files are stored on the device. Appears when an unsupported device is connected. If it appears when a supported device is connected, reconnect the device. QRG TOC Index Home 136 * Not available on all models 2012 FitUS FIT-31TK6630.book 137 ページ２０１１年６月１５日　水曜日　午後４時２３分 General Information on the Audio System Recommended CDs • Use only high-quality CD-R or CD-RW discs labeled for audio use. • Use only CD-R or CD-RW discs on which the recordings are closed. • Play only standard round-shaped CDs. The CD packages or jackets should have one of these marks. ■ CDs with MP3 or WMA files • Some software files may not allow for audio play or text data display. • Some versions of MP3 or WMA formats may be unsupported. 1Recommended CDs A Dual-disc cannot play on this audio unit. If recorded under certain conditions, a CD-R or CD-RW may not play either. Continued QRG TOC Index Home 137 2012 FitUS FIT-31TK6630.book 138 ページ２０１１年６月１５日　水曜日　午後４時２３分 uuGeneral Information on the Audio SystemuRecommended CDs ■ Protecting CDs Follow these precautions when handling or storing CDs: • Store a CD in its case when it is not being played. • When wiping a CD, use a soft clean cloth from the center to the outside edge. • Handle a CD by its edge. Never touch either surface. • Never insert foreign objects into the CD player. • Keep CDs out of direct sunlight and extreme heat. • Do not place stabilizer rings or labels on the CD. • Avoid fingerprints, liquids, and felt-tip pens on the CD. 1Protecting CDs NOTICE Do not insert a damaged CD. It may be stuck inside and damage the audio unit. Examples: ● Bubbled, wrinkled, labeled, and excessively thick CDs Bubbled/ Wrinkled With Label/ Sticker Using Printer Label Kit Sealed With Plastic Ring ● Damaged CDs Chipped/ Cracked W arped ● Small CDs ● Poor quality CDs 3-inch (8-cm) CD Burrs QRG TOC Index Home 138 2012 FitUS FIT-31TK6630.book 139 ページ２０１１年６月１５日　水曜日　午後４時２３分 uuGeneral Information on the Audio SystemuCompatible iPod® and USB Flash Drives * Compatible iPod® and USB Flash Drives* ■ iPod® Model Compatibility Model iPod classic® 80GB/160GB iPod classic® 120GB iPod classic® 160GB (launch in 2009) iPod® (5th generation) iPod nano® iPod touch® 1iPod® Model Compatibility This system may not work with all software versions of these devices. ■ USB Flash Drives • Use a recommended USB flash drive of 256 MB or higher. • Some digital audio players may not be compatible. • Some USB flash drives (e.g., a device with security lockout) may not work. • Some software files may not allow for audio play or text data display. • Some versions of MP3, WMA, or AAC formats may be unsupported. 1USB Flash Drives Files on the USB flash drive are played in their stored order. This order may be different from the order displayed on your PC or device. * Not available on all models QRG TOC Index Home 139 2012 FitUS FIT-31TK6630.book 140 ページ２０１１年６月１５日　水曜日　午後４時２３分 Bluetooth® HandsFreeLink® QRG TOC Index Home Models with navigation system For models with the navigation system, see Navigation System Manual for how to operate the Bluetooth® HandsFreeLink®. Models without navigation system Bluetooth® HandsFreeLink® (HFL) allows you to place and receive phone calls using your vehicle’s audio system, without handling your cell phone. Using HFL ■ HFL Buttons (HFL Talk) Button Microphone Volume Knob (HFL Back) Button (HFL Talk) button: Press to go directly to give a command or to answer an incoming call. (HFL Back) button: Press to end a call or to cancel a command. 140 * Not available on all models 1Bluetooth® HandsFreeLink® To use HFL, you need a Bluetooth-compatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities: • Canada: Visit www.handsfreelink.ca, or call (888) 528 -7876. Voice control tips • Aim the vents away from the ceiling and close the windows, as noise coming from them may interfere with the microphone. • Press and release the button before giving a command. Speak clearly and naturally after a beep. • If the microphone picks up voices other than yours, the command may be misinterpreted. • A command that consists of several words can be spoken together. For example, say “Call 123-456- 7890” at once. • To change the volume level, use the audio system’s volume knob. 2012 FitUS FIT-31TK6630.book 141 ページ２０１１年６月１５日　水曜日　午後４時２３分 ■ Help Features • To hear general HFL information and help, say “Tutorial.” • Say “Hands free help” or “Help” any time to get help or hear a list of commands. ■ Information Display Bluetooth Indicator Bluetooth Indicator comes on the audio display when your phone is connected to HFL. uu Bluetooth® HandsFreeLink® *uUsing HFL 1Bluetooth® HandsFreeLink® Bluetooth® Wireless Technology Bluetooth® name and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Honda Motors Co., Ltd., is under license. Other trademarks and trade names are those of their respective owners. * Not available on all models QRG TOC Index Home 141 2012 FitUS FIT-31TK6630.book 142 ページ２０１１年６月１５日　水曜日　午後４時２３分 uu Bluetooth® HandsFreeLink® *uHFL Menus HFL Menus The ignition switch must be in ACCESSORY (q or ON (w to use HFL. To use HFL, you must first pair your Bluetooth-compatible cell phone to the system while the vehicle is parked. Press the (HFL Talk) button each time you give a command “Phone setup” “Pair” “Edit” “Delete” “List” “Status” Pair a phone to the system. Edit the name of a paired phone. Delete a paired phone from the system. Hear a list of all phones paired to the system. Hear which paired phone is currently linked to the system. “Next phone” Search for another phone that has been paired. “Set pairing code” Set the pairing code to either “Fixed” or “Random.” QRG TOC “Call”/“Dial” e.g.: “123-456-####” Say a phone number. e.g.: “Jim Smith” Say a name after a phonebook entry is stored. “Redial” “Transfer” “Mute” “Send” Index Home Redial the last number called. Transfer a call from HFL to your phone or from your phone to HFL. Mute your voice to the person at the other end of the call. Send numbers or names during a call. 142 * Not available on all models 2012 FitUS FIT-31TK6630.book 143 ページ２０１１年６月１５日　水曜日　午後４時２３分 uu Bluetooth® HandsFreeLink® *uHFL Menus “Phonebook” “Store” “Edit” “Delete” “List” Store a phonebook entry. Edit the number of an existing phonebook entry. Delete a phonebook entry. Hear a list of all stored phonebook entries. “Receive contact” * Transfer contacts from your phone to HFL. “System setup” “Security” Apply a security passcode to the system that must be input at each key cycle to access the system. “Change passcode” Change your security passcode. “Call notification” Set how you want to be notified of an incoming call. “Auto transfer” Set to automatically transfer calls from your phone to HFL when you enter the vehicle. “Clear” Clear the system of all paired phones, phonebook entries, and security passcode. “Change language” Switch the system language between English and French. “Tutorial” Hear a tutorial for general rules on using the system. “Hands-free help” Hear a list of available commands and additional information describing each command. QRG TOC Index Home * Not available on all models Continued 143 2012 FitUS FIT-31TK6630.book 144 ページ２０１１年６月１５日　水曜日　午後４時２３分 uu Bluetooth® HandsFreeLink® *uHFL Menus QRG ■ Phone Setup ■ To pair a cell phone 1. If no phone has been paired to the system before, HFL gives you information about how to pair the first phone. If a phone has already been paired: say “Phone Setup” and “Pair” after the HFL prompts. 2. Follow the HFL prompts and put your phone in discovery or search mode. u HFL gives you a four-digit code and begins searching for your phone. 3. When your phone finds a Bluetooth® device, select HFL from the options and TOC enter the four-digit code. Index Home 4. Follow the HFL prompts and name the newly paired phone. ■ To rename a paired phone 1. Say “Phone Setup.” 2. Say “Edit” after the prompts. 3. Follow the HFL prompts and rename the phone. u If there is more than one phone paired to the system, HFL will ask you which phone’s name you want to change. ■ To delete a paired phone 1. Say “Phone Setup.” 2. Say “Delete” after the prompts. 3. Follow the HFL prompts. u HFL will ask you which phone you want to delete. 144 * Not available on all models 1Phone Setup Press the giving a command. button and wait for a beep before Your Bluetooth-compatible phone must be paired to HFL before you can make and receive hands-free calls. Phone Pairing Tips: • You cannot pair your phone while the vehicle is moving. • Your phone must be in the discovery or search mode when pairing the phone. Refer to your phone’s manual. • Up to six phones can be paired. • Your phone’s battery may drain faster when it is paired to HFL. • If your phone is not ready for pairing or not found by the system within three minutes, the system will time out and returns to idle. 2012 FitUS FIT-31TK6630.book 145 ページ２０１１年６月１５日　水曜日　午後４時２３分 ■ To hear the name of all paired phones 1. Say “Phone Setup.” 2. Say “List” after the prompts. 3. HFL reads out all the paired phones’ names. ■ To hear which paired phone is currently linked 1. Say “Phone Setup.” 2. Say “Status” after the prompts. 3. HFL will tell you which phone is linked with the system. ■ To change the currently linked phone 1. Say “Phone Setup.” 2. Say “Next Phone” after the prompts. 3. HFL disconnects the current phone, and searches for another paired phone. 4. Once another phone is found, it is connected to the system. HFL will inform you which phone is now linked. ■ To change the pairing code setting 1. Say “Phone Setup.” 2. Say “Set Pairing Code” after the prompts. 3. If you want HFL to create a random code each time you pair a phone, say “Random.” If you want to create your own four-digit code, say “Fixed.” 4. Follow the HFL prompts. * Not available on all models Continued uu Bluetooth® HandsFreeLink® *uHFL Menus 1Phone Setup If no other phones are found or paired when trying to switch to another phone, HFL will inform you that the original phone is linked again. The “Status” and “Next Phone” commands use: Only one paired phone at a time can be linked to HFL. When there are two or more paired phones in the vehicle, the first paired phone that the system finds is linked. QRG TOC Index Home 145 2012 FitUS FIT-31TK6630.book 146 ページ２０１１年６月１５日　水曜日　午後４時２３分 uu Bluetooth® HandsFreeLink® *uHFL Menus ■ Making a Call You can make calls using any phone number or a name in the HFL phonebook, and redial the last number called. 1Making a Call Press the giving a command. button and wait for a beep before HFL uses a Class 2 Bluetooth, with has a maximum range of about 30 feet (10 meters). HFL allows you to talk up to 30 minutes after you remove the key from the ignition switch. However, this may weaken the vehicle’s battery. ■ Direct dialing a phone number 1. Say “Call” or “Dial.” 2. Say the number you want to dial after the prompts. 3. Say “Call” or “Dial” after the prompts. ■ From the HFL phonebook 1. Say “Call” or “Dial.” 2. Say the name stored in the HFL phonebook after the prompts. 3. Follow the HFL prompts. ■ To redial the last number called by HFL Say “Redial.” ■ To end a call Press the (HFL back) button. QRG TOC Index Home 146 * Not available on all models 2012 FitUS FIT-31TK6630.book 147 ページ２０１１年６月１５日　水曜日　午後４時２３分 uu Bluetooth® HandsFreeLink® *uHFL Menus ■ Receiving a Call Press the button to hang up. When there is an incoming call, a call notification (if activated) sounds and a message appears on the display. button to answer the call, or the ■ Transferring a Call You can transfer a call from HFL to your phone, or from your phone to HFL. Press the button and say “Transfer.” ■ Muting a Call To mute or unmute your voice during a call, press and release the say “Mute.” button and 1Receiving a Call Call Waiting Press the to answer the incoming call. button and put the original call on hold Press the original call. button again to return to the Ignore the incoming call if you do not want to answer it. Press the original and answer the incoming call. button if you want to hang up the ■ Sending Numbers or Names During a Call You can send numbers and names during a call. This is useful when calling a menu- driven phone system. 1Sending Numbers or Names During a Call Press the button before a command. To send a , say “Pound.” To send a , say “Star.” ■ To send a number or name during a call 1. Say “Send.” 2. Say the number or name you want to send after the prompts. 3. Follow the HFL prompts. * Not available on all models Continued QRG TOC Index Home 147 2012 FitUS FIT-31TK6630.book 148 ページ２０１１年６月１５日　水曜日　午後４時２３分 uu Bluetooth® HandsFreeLink® *uHFL Menus ■ HFL Phonebook You can store up to 50 names with their associated numbers in HFL. The numbers you store can be account numbers or passwords. These numbers can be sent to an automated phone system. 1HFL Phonebook • Avoid using duplicate name entries. • Avoid using “home” as a name entry. • It is easier for HFL to recognize a multisyllabic or longer name. For example, use “Peter” instead of “Pete,” or “John Smith” instead of “John.” ■ To store a phonebook entry 1. Say “Phonebook.” 2. Say “Store” after the prompts. 3. Say a name you want to list as your phonebook entry. 4. Say the number you want to store for the name entry. 5. Follow the HFL prompts and say “Enter” to store the entry. ■ To edit the number stored for a name 1. Say “Phonebook.” 2. Say “Edit” after the prompts. 3. Say a name you want to edit. When asked, say the new number for that name. 4. Follow the HFL prompts and say “Enter” to store the entry. QRG TOC Index Home 148 * Not available on all models 2012 FitUS FIT-31TK6630.book 149 ページ２０１１年６月１５日　水曜日　午後４時２３分 uu Bluetooth® HandsFreeLink® *uHFL Menus ■ To delete a name 1. Say “Phonebook.” 2. Say “Delete” after the prompts. 3. Say a name you want to delete. 4. Say “Yes,” and follow the HFL prompts. ■ To list all names in the phonebook 1. Say “Phonebook.” 2. Say “List” after the prompts. 3. HFL begins reading the names in the order they were stored. 4. When you hear a name you want to call, say “Call.” ■ To store a specific phone number from your cell phone directly to the HFL phonebook * 1. Say “Phonebook.” 2. Say “Receive Contact” after the prompts. 3. Follow the HFL prompts, select a number from your cell phone, and send it to HFL. 4. Follow the HFL prompts and name the number, or say “Discard” if it is not the number you want to store. 5. Follow the HFL prompts to continue. * Not available on all models Continued QRG TOC Index Home 149 2012 FitUS FIT-31TK6630.book 150 ページ２０１１年６月１５日　水曜日　午後４時２３分 uu Bluetooth® HandsFreeLink® *uHFL Menus QRG ■ System Setup This command group allows you to change or customize HFL basic settings. 1System Setup Press the button before a command. Once a passcode is set, you are required to enter the passcode with every new key cycle to use HFL. If you forget the code, go to your dealer to have the passcode reset. You can also cancel the passcode by clearing all the data stored in the HFL system. 2 To clear the system P. 151 The default setting of the incoming notification is a ring tone. ■ To set a four-digit passcode to lock the HFL system for security 1. Say “System Setup.” 2. Say “Security.” 3. Follow the HFL prompts and say the four-digit number of your choice. 4. Follow the HFL prompts and confirm the number. TOC ■ To change the security passcode 1. Say “System Setup.” 2. Say “Change Passcode” after the prompts. 3. Say the new four-digit passcode after the HFL prompts. 4. Follow the HFL prompts. ■ To select a ring tone or a prompt as the incoming call notification 1. Say “System Setup.” 2. Say “Call Notification” after the prompts. 3. Say “Ring Tone” or “Prompt” after the prompts. For no audible notification, say “Off.” Index Home 150 * Not available on all models 2012 FitUS FIT-31TK6630.book 151 ページ２０１１年６月１５日　水曜日　午後４時２３分 uu Bluetooth® HandsFreeLink® *uHFL Menus ■ To activate or deactivate the auto transfer function The call on your cell phone can be automatically transferred to HFL when you get into the vehicle and turn on the ignition switch. 1. Say “System Setup.” 2. Say “Auto Transfer” after the prompts. HFL lets you know the current status. 3. Follow the HFL prompts to change the setting. 1System Setup Press the button before a command. You can clear the system when you have forgotten the passcode and cannot access HFL. When HFL asks you for the passcode, say “System Clear.” ■ To clear the system Paired phones, all stored or imported phonebook data, and any passcodes are erased. 1. Say “System Setup.” 2. Say “Clear” after the prompts. 3. Follow the HFL prompts. ■ Change Language You can set the system language to French or English. 1. Say “Change Language.” 2. Follow the HFL prompts. If you have not named your paired phone in the selected language, HFL will ask you to name it in that language. * Not available on all models * Not available on all models 1Change Language Press the button before a command. QRG TOC Index Home 151 2012 FitUS FIT-31TK6630.book 152 ページ２０１１年６月１５日　水曜日　午後４時２３分 QRG Index Home 152 2012 FitUS FIT-31TK6630.book 153 ページ２０１１年６月１５日　水曜日　午後４時２３分 QRG This chapter discusses driving, refueling, and information on items such as accessories. Driving Before Driving Driving Preparation .......................... 154 Maximum Load Limit........................ 157 Towing a Trailer Towing Your Vehicle........................ 159 When Driving Starting the Engine .......................... 161 Precautions While Driving................. 163 Automatic Transmission ................... 164 Models with 7 positions AT Shifting............................................ 165 Models with 5 positions AT Shifting............................................ 167 * Not available on all models Index Home Manual transmission models Shifting............................................ 171 Cruise Control* ............................... 173 VSA® (Vehicle Stability Assist), aka ESC (Electronic Stability Control), System ...... 176 TPMS (Tire Pressure Monitoring System) .. 178 Tire Pressure Monitoring System (TPMS) - Required Federal Explanation ......... 179 Braking Brake System ................................... 181 ABS (Anti-lock Brake System) ........... 183 Brake Assist System.......................... 184 Parking Your Vehicle When Stopped ................................ 185 Parking ............................................ 185 Refueling Fuel Information .............................. 186 How to Refuel ................................. 187 Fuel Economy.................................... 189 Improving Fuel Economy.................. 189 Accessories and Modifications Accessories ...................................... 190 Modifications................................... 190 153 2012 FitUS FIT-31TK6630.book 154 ページ２０１１年６月１５日　水曜日　午後４時２３分 Before Driving QRG Driving Preparation Check the following items before you start driving. ■ Exterior Checks • Make sure there are no obstructions on the windows, door mirrors, exterior lights, or other parts of the vehicle. u Remove any frost, snow, or ice. u Remove any snow on the roof, as this can slip down and obstruct your field of vision while driving. If frozen solid, remove ice once it has softened. u When removing ice from around the wheels, be sure not to damage the wheel or wheel components. • Make sure the hood is securely closed. u If the hood opens while driving, your front view will be blocked. • Make sure the tires are in good condition. u Check air pressure, check for damage and excessive wear. 2 Checking and Maintaining Tires P. 222 • Make sure there are no people or objects behind or around the vehicle. u There are blind spots from the inside. TOC 1Exterior Checks NOTICE When doors are frozen shut, use warm water around the door edges to melt any ice. Do not try to force them open, as this can damage the rubber trim around the doors. When done, wipe dry to avoid further freezing. Do not pour warm water into the key cylinder. You will be unable to insert key if the water freezes in the hole. Index Home 154 2012 FitUS FIT-31TK6630.book 155 ページ２０１１年６月１５日　水曜日　午後４時２３分 ■ Interior Checks • Store or secure all items on board properly. u Carrying too much cargo, or improperly storing it, can affect your vehicle’s handling, stability, stopping distance, and tires, and make it unsafe. 2 Maximum Load Limit P. 157 • Do not pile items higher than the seat height. u They can block your view and may be thrown forward in the event of sudden braking. • Do not place anything in the front seat footwells. Make sure to secure the floor mat .* u An object or unsecured floor mat can interfere with your brake and accelerator pedal operation while driving. • If you have any animals on board, do not let them move around in the vehicle. u They may interfere with driving and a crash could occur. • Securely close and lock all doors and the tailgate. 2 Locking/Unlocking the Doors from the Inside P. 82 • Adjust your seating position properly. u Adjust the head restraint, too. 2 Adjusting the Seats P. 103 2 Adjusting the Head Restraints P. 105 • Adjust the mirrors and steering wheel properly for your driving. u Adjust them while sitting in the proper driving position. 2 Adjusting the Mirrors P. 102 2 Adjusting the Steering Wheel P. 101 * Not available on all models Continued uuBefore DrivinguDriving Preparation QRG 1Interior Checks The headlight aim is set by the factory, and does not need to be adjusted. However, if you regularly carry heavy items in the cargo area, have the aiming readjusted at a dealer or by a qualified technician. TOC Index Home 155 2012 FitUS FIT-31TK6630.book 156 ページ２０１１年６月１５日　水曜日　午後４時２３分 uuBefore DrivinguDriving Preparation QRG • Be sure items placed on the floor behind the front seats cannot roll under the seats. u They can interfere with the driver’s ability to operate the pedals, the operation of the seats, or the operation of the sensors under the seats. • Everyone in the vehicle must fasten their seat belt. 2 Fastening a Seat Belt P. 29 • Make sure that the indicators in the instrument panel come on when you start the vehicle, and go off soon after. u Always have a dealer check the vehicle if a problem is indicated. 2 Indicators P. 64 TOC Index Home 156 2012 FitUS FIT-31TK6630.book 157 ページ２０１１年６月１５日　水曜日　午後４時２３分 Maximum Load Limit The maximum load for your vehicle is 850 lbs (385 kg). See Tire and Loading Information label attached to the driver's doorjamb. Label Example This figure includes the total weight of all occupants, cargo, and accessories, and the tongue load if you are towing a trailer. Steps for Determining Correct Load Limit - (1) Locate the statement "The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs." on your vehicle's placard. (2) Determine the combined weight of the driver and passengers that will be riding in your vehicle. (3) Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs. (4) The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the "XXX" amount equals 1,4000 lbs. and there will be five 150 lb. passengers in in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1,400 - 750 (5 x 150) = 650 lbs.) Continued uuBefore DrivinguMaximum Load Limit QRG 1Maximum Load Limit 3WARNING Overloading or improper loading can affect handling and stability and cause a crash in which you can be hurt or killed. Follow all load limits and other loading guidelines in this manual. Gross Vehicle Weight Rating (GVWR): The maximum allowable weight of the vehicle, all occupants, all accessories, all cargo, and the tongue load. 2 Specifications P. 268 Gross Axle Weight Rating (GAWR): The maximum allowable weight of the vehicle axle. 2 Specifications P. 268 TOC Index Home 157 2012 FitUS FIT-31TK6630.book 158 ページ２０１１年６月１５日　水曜日　午後４時２３分 uuBefore DrivinguMaximum Load Limit QRG (5) Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in step 4. (6) If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. In addition, the total weight of the vehicle, all occupants, accessories, cargo, and trailer tongue load must not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR). Both are on a label on the driver's doorjamb. Load Limits Example Example1 Example2 TOC Index Home 158 Max Load 850 lbs (385 kg) Passenger Weight 150 lbs x 2 = 300 lbs (68 kg x 2 = 136 kg) Cargo Weight 550 lbs (249 kg) Max Load 850 lbs (385 kg) Passenger Weight 150 lbs x 5 = 750 lbs (68 kg x 5 = 340 kg) Cargo Weight 100 lbs (45 kg) 2012 FitUS FIT-31TK6630.book 159 ページ２０１１年６月１５日　水曜日　午後４時２３分 Towing a Trailer Your vehicle is not designed to tow a trailer. Attempting to do so can void your warranties. Towing Your Vehicle Your vehicle can be towed behind a motorhome. ■ When Your Vehicle is Towed Behind a Motorhome Perform the following procedure before towing your vehicle. Automatic transmission models 1. Check the transmission fluid level. u Make sure the fluid level is between the upper and lower marks. 2. Start the engine. 3. Depress the brake pedal. Move the shift lever through all its positions. 4. Shift to (D and hold for five seconds, then to (N. Let the engine run for three minutes, then turn it off. 5. Release the parking brake. 6. Leave the ignition switch in ACCESSORY (q. u Make sure the steering wheel does not lock. 7. Turn off all the electric devices. Do not use any accessory power sockets. u This can prevent the battery from running down. Manual transmission models 1. Shift to (N. 2. Release the parking brake. 3. Turn the ignition switch to ACCESSORY (q. u Make sure the steering wheel does not lock. 4. Turn off all the electric devices. Do not use any accessory power sockets. u This can prevent the battery from running down. Continued QRG 1Towing Your Vehicle Automatic transmission models NOTICE Failure to follow the recommended instructions exactly will result in severe automatic transmission damage. If you cannot shift the transmission or start the engine, your vehicle must be transported on a flat-bed truck or trailer. Do not exceed 65 mph (100 km/h). Consult your towing parts sales or rental agency if any other items are recommended or required for your towing situation. Automatic transmission models If you tow your vehicle behind a motorhome, the transmission fluid must be changed every 2 years or 30,000 miles (48,000 km), whichever comes first. TOC 1When Your Vehicle is Towed Behind a Motorhome Automatic transmission models NOTICE Severe transmission damage will occur if the vehicle is shifted from (R to (N and then towed with the drive wheels on the ground. Index Home 159 2012 FitUS FIT-31TK6630.book 160 ページ２０１１年６月１５日　水曜日　午後４時２３分 uuTowing a TraileruTowing Your Vehicle QRG ■ Extended Towing If you tow more than 8 hours in one day, you should repeat the “before towing your vehicle procedure” at least every 8 hours. You also need to perform the following procedure to prevent the battery from running down. Interior Fuse Box 1. Remove the 30 A accessory radio fuse. This fuse is located in the interior fuse box. 2 Interior Fuse Box P. 261 2. Store the fuse in a safe place so you do not lose it. u Make sure to reinstall the fuse before you start driving your vehicle. TOC Index Home 160 Radio Fuse 2012 FitUS FIT-31TK6630.book 161 ページ２０１１年６月１５日　水曜日　午後４時２３分 When Driving Starting the Engine 1. Make sure the parking brake is applied. 1Starting the Engine Keep your foot firmly on the brake pedal when starting the engine. The engine is harder to start in cold weather and in thinner air found at altitudes above 8,000 feet (2,400 meters). When starting the engine in cold weather, turn off all electrical accessories such as the lights, heating and cooling * system, and rear defogger in order to reduce battery drain. If the exhaust system sounds abnormal or you can smell exhaust gas inside the vehicle, have your vehicle checked by a dealer. There may be a problem with the engine or exhaust system. Brake Pedal Automatic transmission models 2. Check that the shift lever is in (P, then depress the brake pedal. u Although it is possible to start the vehicle in (N, it is safer to start it in (P. Clutch Pedal Brake Pedal Manual transmission models 2. Check that the shift lever is in (N. Then depress the brake pedal with your right foot, and the clutch pedal with your left foot. u The clutch pedal must be fully depressed to start the engine. * Not available on all models Continued QRG TOC Index Home 161 2012 FitUS FIT-31TK6630.book 162 ページ２０１１年６月１５日　水曜日　午後４時２３分 uuWhen DrivinguStarting the Engine QRG 3. Turn the ignition switch to START (e without depressing the accelerator pedal. 1Starting the Engine Do not hold the key in START (e for more than 15 seconds. • If the engine does not start right away, wait for at least 10 seconds before trying again. • If the engine starts, but then immediately stops, wait at least 10 seconds before repeating step 3 while gently depressing the accelerator pedal. Release the accelerator pedal once the engine starts. ■ Starting to Drive Automatic transmission models 1. Keeping your right foot on the brake pedal, release the parking brake. Check that The immobilizer system protects your vehicle from theft. If an improperly coded key (or other device) is used, the engine’s fuel system is disabled. 2 Immobilizer System P. 90 the brake system indicator has gone off. 2 Parking Brake P. 181 2. Put the shift lever in (D. Select (R when reversing. 3. Gradually release the brake pedal and gently depress the accelerator pedal to pull away. TOC Index Home 162 2012 FitUS FIT-31TK6630.book 163 ページ２０１１年６月１５日　水曜日　午後４時２３分 Precautions While Driving ■ In Rain Avoid driving in deep water and on flooded roads. This can damage the engine or cause electrical component failure. ■ Other Precautions If there is a strong impact with something under the vehicle, stop in a safe location. Check the underside of the vehicle for damage or any fluid leaks. uuWhen DrivinguPrecautions While Driving QRG 1Precautions While Driving NOTICE Do not operate the shift lever while pressing the accelerator pedal. You could damage the transmission. If the ignition switch is turned to ACCESSORY (q or LOCK (0 while driving, the engine will shut down and all steering and brake power assist functions will stop, making it difficult to control the vehicle. Do not put the shift lever in (N, as you will lose engine braking (and acceleration) performance. During the first 600 miles (1,000 km) of operation, avoid sudden acceleration or full throttle operation so as to not damage the engine or powertrain. Avoid hard braking for the first 200 miles (300 km). You should also follow this when the brake pads are replaced. TOC Sport Models NOTICE The following can damage the under spoiler: • Parking the vehicle by a parking block • Parallel parking along the road shoulder • Driving towards the bottom of a hill • Driving up or down to a different surface level (such as a road shoulder) • Driving on a rutted or bumpy road • Driving on a road with potholes. Index Home 163 2012 FitUS FIT-31TK6630.book 164 ページ２０１１年６月１５日　水曜日　午後４時２３分 uuWhen DrivinguAutomatic Transmission Automatic Transmission ■ Creeping The following conditions cause the engine to run at high revolutions, and increase creeping: • Immediately after the engine starts. • When the heating and cooling * system is in use. Keep the brake pedal firmly depressed when stopped. ■ Kickdown Quickly depressing the accelerator pedal while driving uphill may cause the transmission to drop to a lower gear, unexpectedly increasing vehicle speed. Depress the accelerator pedal carefully, especially on slippery roads and curves. QRG TOC Index Home 164 * Not available on all models 2012 FitUS FIT-31TK6630.book 165 ページ２０１１年６月１５日　水曜日　午後４時２３分 Shifting Change the shift position in accordance with your driving needs. Models with 7 positions AT ■ Shift lever positions Release Button Park Used when parking or starting the engine Reverse Used when reversing Neutral Used when idling Drive Used for normal driving (gears change between 1st and 5th automatically) Drive (D3) Used when: ● Going up or down hills Second Used to increase engine braking (the transmission is locked in 2nd gear) First Used to further increase engine braking (the transmission is locked in 1st gear) Continued uuWhen DrivinguShifting QRG 1Shifting You cannot turn the ignition switch to LOCK (0 and remove the key unless the shift lever is in (P. The vehicle may move forward very slightly even in (N while the engine is cold. Depress the brake pedal firmly and, when necessary, apply the parking brake. TOC Index Home 165 2012 FitUS FIT-31TK6630.book 166 ページ２０１１年６月１５日　水曜日　午後４時２３分 uuWhen DrivinguShifting QRG ■ Shift Lever Operation 1Shift Lever Operation Tachometer’s red zone Shift Lever Position Indicator Depress the brake pedal and press the shift lever release button to shift. Shift without pressing the shift lever release button. Press the shift lever release button and shift. NOTICE When you change the shift lever from (D to (R and vice versa, come to a complete stop and keep the brake pedal depressed. Operating the shift lever before the vehicle has come to a complete standstill can damage the transmission. Use the shift lever position indicator to check the lever position before pulling away. Whichever position the shift lever is in when driving, a blinking (D indicator indicates a transmission problem. Avoid sudden acceleration and have the transmission checked by a dealer as soon as possible. The fuel supply may be cut off if you drive at engine speeds in or over the tachometer red zone (engine speed limit). If this happens, you may experience a slight jolt. It may not be possible to operate the shift lever if the brake pedal is applied while the shift lever release button is held down. Depress the brake pedal first. TOC Index Home 166 2012 FitUS FIT-31TK6630.book 167 ページ２０１１年６月１５日　水曜日　午後４時２３分 Shifting Change the shift position in accordance with your driving needs Models with 5 positions AT ■ Shift lever positions Release Button Park Used when parking or starting the engine Reverse Used when reversing Neutral Used when idling Drive Used for: ● Normal driving (gears change between 1st and 5th automatically) ● Temporarily driving in the sequential mode Drive (S) Used for: ● Automatically changing gears between 1st and 4th (4th gear is used only at high speed) ● Driving in the sequential mode Continued uuWhen DrivinguShifting QRG 1Shifting You cannot turn the ignition switch to LOCK (0 and remove the key unless the shift lever is in (P. The vehicle may move forward very slightly even in (N while the engine is cold. Depress the brake pedal firmly and, when necessary, apply the parking brake. TOC Index Home 167 2012 FitUS FIT-31TK6630.book 168 ページ２０１１年６月１５日　水曜日　午後４時２３分 uuWhen DrivinguShifting QRG ■ Shift Lever Operation 1Shift Lever Operation Tachometer’s red zone Shift Lever Position Indicator M (Sequential Shift Mode) Indicator/ Gear position Indicator Depress the brake pedal and press the shift lever release button to shift. Shift without pressing the shift lever release button. Press the shift lever release button and shift. NOTICE When you change the shift lever from (D to (R and vice versa, come to a complete stop and keep the brake pedal depressed. Operating the shift lever before the vehicle has come to a complete standstill can damage the transmission. Use the shift lever position indicator to check the lever position before pulling away. Whichever position the shift lever is in when driving, a blinking (D indicator indicates a transmission problem. Avoid sudden acceleration and have the transmission checked by a dealer as soon as possible. The fuel supply may be cut off if you drive at engine speeds in or over the tachometer red zone (engine speed limit). If this happens, you may experience a slight jolt. It may not be possible to operate the shift lever if the brake pedal is applied while the shift lever release button is held down. Depress the brake pedal first. TOC Index Home 168 2012 FitUS FIT-31TK6630.book 169 ページ２０１１年６月１５日　水曜日　午後４時２３分 uuWhen DrivinguShifting QRG ■ Sequential Shift Mode Use the paddle shifters to change between 1st and 5th gears without removing your hands from the steering wheel. The transmission will switch to the sequential shift mode. ■ When the shift lever is in (D: The vehicle will go into the sequential shift mode momentarily, and the gear position indicator will come on. Once you start traveling at a constant speed, the sequential shift mode will automatically switch off, and the gear position indicator will go off. Hold the (+ paddle shifter for two seconds to return to normal drive. ■ When the shift lever is in (S: The vehicle will go into the sequential shift mode, and the (M (sequential shift) indicator and gear position indicator will come on. At speeds of 6 mph (10 km/h) or less, the vehicle automatically shifts down into 1st gear. It will not automatically shift up, even if vehicle speed increases. You can only pull away in 1st or 2nd gear. When switching out of the sequential shift mode, move the shift lever from (S to (D. When the sequential shift mode is canceled, the sequential shift mode indicator and shift indicator go off. Continued TOC Index Home 169 2012 FitUS FIT-31TK6630.book 170 ページ２０１１年６月１５日　水曜日　午後４時２３分 uuWhen DrivinguShifting QRG ■ Second gear lock mode If you pull the (+ paddle shifter while stopped or driving at 6 mph (10 km/h) or less, the gear position will be locked in 2nd gear. This makes it easier to pull away on slippery surfaces such as snow covered roads. To cancel the 2nd gear lock mode, pull the (- paddle shifter, or move the shift lever from (S to (D. ■ Sequential Shift Mode Operation (- Paddle Shifter (Shift down) (+ Paddle Shifter (Shift up) TOC Index Home 170 Downshifting when pulling the (- paddle shifter (Changes to a higher gear) Upshifting when pulling the (+ paddle shifter (Changes to a higher gear) 1Sequential Shift Mode Operation Each paddle shift operation makes a single gear change. To change gears continuously, release the paddle shifter before pulling it again for the next gear. Recommended Shift Points Use this table as a guideline for efficient fuel economy and effective emission control. Shift Up Normal Acceleration 1st to 2nd 2nd to 3rd 3rd to 4th 4th to 5th 15 mph (24 km/h) 25 mph (40 km/h) 40 mph (64 km/h) 47 mph (76 km/h) If the gear position indicator blinks when you try to shift up or down, this means your vehicle speed is not in its allowable gear shifting range. Slightly accelerate to shift up and decelerate to shift down while the indicator is blinking. 2012 FitUS FIT-31TK6630.book 171 ページ２０１１年６月１５日　水曜日　午後４時２３分 Manual transmission models Shifting ■ Shift Lever Operation Fully depress the clutch pedal to operate the shift lever and change gears, then slowly release the pedal. Depress the clutch pedal, and pause for a few seconds before shifting into (R, or shift into one of the forward gears for a moment. This stops the gears so they do not “grind.” uuWhen DrivinguShifting QRG 1Shifting NOTICE Do not shift to (R before the vehicle comes to a complete stop. Shifting to (R before stopping can damage the transmission. NOTICE Before downshifting, make sure the engine will not go into the tachometer’s red zone. Should this occur, it can severely damage your engine. TOC Index Home 171 Continued 2012 FitUS FIT-31TK6630.book 172 ページ２０１１年６月１５日　水曜日　午後４時２３分 uuWhen DrivinguShifting QRG When you are not shifting, do not rest your foot on the clutch pedal. This can cause your clutch to wear out faster. TOC Index Home 172 1Shifting Recommended Shift Points Driving in the highest gear that allows the engine to run and accelerate smoothly helps to optimize fuel economy and effective emissions control. The following shift points are recommended: Shift Up Normal Acceleration 1st to 2nd 2nd to 3rd 3rd to 4th 4th to 5th 15 mph (24 km/h) 27 mph (44 km/h) 39 mph (63 km/h) 53 mph (85 km/h) If you exceed the maximum speed for the gear you are in, the engine speed will enter into the tachometer’s red zone. When this happens, you may experience a slight jolt. 2012 FitUS FIT-31TK6630.book 173 ページ２０１１年６月１５日　水曜日　午後４時２３分 Cruise Control* Maintains a constant vehicle speed without having to keep your foot on the accelerator. Use cruise control on freeways or open roads where you can travel at a constant speed with little acceleration or deceleration. When to use ■Vehicle speed for cruise control: Desired speed in a range above roughly 25 mph (40 km/h) ~ Automatic transmission models ■Shift positions for cruise control: In (D, (d * or (S * How to use ■Press the CRUISE button on the steering wheel. Always keep sufficient distance between you and the vehicle in front of you. CRUISE MAIN is on in the instrument panel.

Boost Classifieds - Car Advice, Reviews, Events & Classifieds

2012 Honda Fit Owners Manual